The octave test asserts both values stay within OCTAVE_SCALE_MAX (it
passed with the bound removed). The comment names Perspective Offset as
what multiplies the offset by the depth, and says why an octave at the
bound has no detail.
The sub-pixel bounds lx + ix and lx + lw - ix round separately, so at third
resolution they can still cross by an ulp and f64::clamp panics; a NaN
layer size panicked too. max/min equals clamp whenever the bounds are
ordered and cannot panic. The test now covers half and third resolution at
fractional offsets and a NaN layer size. The parity note says Amount, not
the displacement, is bounded to 2^24 px.
The spin helper's name gives its unit (degrees), the zoom helper's doc
uses |amount| as the code does, and the parity row and tests say what
is and is not checked against After Effects.
Locked pinning clamped samples to lx + 0.5 .. lx + lw - 0.5. On a layer
under a buffer pixel across (a 1-pixel layer at half resolution) the bounds
cross and f64::clamp panics. They now meet at the layer's centre there and
are unchanged otherwise.
Expressions are not clamped to the hard range. Padding computed
amount.abs().ceil() as u32 + 1, which overflowed (a panic in debug builds)
from about 4.3e9 on both the CPU and GPU paths, a NaN Amount filled the
layer with NaN, and an infinite one sent infinite coordinates to the
samplers' integer pixel positions.
turbulent_amount_px, shared by both paths, skips a zero or NaN Amount and
bounds the rest to 2^24 px. Values inside the hard range are unchanged.
Tests cover both ends of the range with every displacement kind, pinning
and Resize Layer (finite, padding within budget), Amounts past it, and
CPU/GPU agreement at -10000, 10000 and infinity.
The hard range was -1000..1000, so prop.set and the Effect Controls and
Timeline editors clamped Amount values After Effects accepts. The recorded
ADBE Turbulent Displace definition allows -10000..10000 (plain units, no
conversion). The default and the -200..200 slider are unchanged.
The .aep range guard no longer lists the parameter as narrower, and the
engine range test covers both ends through prop.set, undo/redo, save and
reopen, and projects saved with the old range.
After Effects records Sub Scaling's valid range as 10..10000 (slider
25..100), but the hard range stopped at 100, so prop.set and the value
editors clamped 200 to 100. The CPU renderer and the GPU pointwise path
also capped the ratio at 1, so a value above 100 rendered as 100 even
once stored.
Widen the hard range for Fractal and Turbulent Noise (they share the
parameter; slider and default unchanged) and take the ratio from one
sub_scaling_ratio (0.1..100) on the CPU and both GPU paths. Above 100
each octave is larger than the last.
Tests: the range and that 200 and 10000 render differently from 100;
finite output at both ends with Complexity 20, Perspective Offset,
Turbulence Factor 10 and a huge offset; CPU/GPU parity at 200 and 10000
on the pointwise and fxn_fractal paths; prop.set, undo/redo and
save/reopen keep 10 and 10000 (engine range table). The .aep range
guard no longer lists the parameter.
Zoom spreads its 32 samples over scales 1 ± Amount / 200 about the
centre. Past Amount 200, which the range now allows, that reaches below
0 and samples the layer mirrored through the centre: at 1000 a layer
white on the left and black on the right turned the right half 35 %
grey.
raster::radial_blur_zoom_scale keeps the old scales up to 200 exactly
and spreads the samples evenly from the centre to 1 + Amount / 200
beyond. The CPU and GPU paths both take their samples from it. Work per
pixel stays at 32 samples at any Amount.
After Effects records 0..1000 for Radial Blur's Amount (slider 0..100);
EffectCraft's hard range stopped at 100, so prop.set and the value
editors clamped 200 to 100. The hard maximum is now 1000; the slider
range and default are unchanged.
The engine range test covers prop.set at both ends, undo and redo, save
and reopen, and a project saved with the old range. The parameter leaves
the .aep range guard's list of known narrower ranges.
Each octave's frequency and Perspective Offset depth are Sub Scaling to
the power of the octave. Above 100 % (After Effects allows 10000) that
reaches 100^±19 at Complexity 20, and Perspective Offset or Turbulence
Factor times the offset overflowed to infinity and drew NaN.
Both stay within 1e20 and its inverse and remain each other's inverse,
so an octave's offset in lattice cells is unchanged; 10..100 never
reaches the bound. The scaled offset stays within 1e36 px, past where
the lattice index saturates. The CPU, fxn_fractal (from fractal_gpu)
and pointwise paths share the bound; one octave_origin replaces the two
copies of the origin code.
At Sub Scaling 10 % and high Complexity an octave's lattice coordinates
pass the i32 range. The cast saturates, and adding the neighbour offset
overflowed (a panic in debug builds). Wrap it, as the GPU's i32 adds do.
Below -100 % an Expansion edge crosses the opposite one and the source
rectangle flips. Pin that geometry, check that the extremes (including
a zero-size source and Unstretch) keep the buffer size and render
finite pixels, and compare CPU and GPU at the new minimum.
Top, Left, Right and Bottom Expansion had a hard range of -100..1000, so
prop.set and the value editors stored -100 for After Effects' valid
-200..-100. The hard minimum is now -200; the 1000 maximum, the default
and the 0..100 slider are unchanged. The engine range table covers both
ends through prop.set, undo/redo, save/reopen and an older project's
stored range, and the four rows leave the aep KNOWN_NARROWER list.
## Behavior
A new Cineon Converter opens with Gamma 1.7. Its Version parameter is 2 by default. A converter saved before Version existed opens as version 1, retaining its Gamma value, keyframes, and expression text and rendering on its original scale. Reset keeps the instance's Version.
In version 2:
- Log to Linear raises the exposure to `1 / gamma` before subtracting the black offset and normalizing: `(E^(1/g) - O^(1/g)) / (1 - O^(1/g))`, with `E = 10^((code - white) * 0.002 / 0.6)` and `O` the exposure at the black point. Gamma 1 gives linear output, and a larger Gamma lightens the midtones. Highlight Rolloff then applies as before, and Linear to Log is the inverse.
- Log to Log returns code values unchanged at Gamma 1 and raises the normalized code value to `1 / gamma` at other values. With custom black or white points, the code values first go through the Gamma 1 conversion.
The CPU and GPU paths match. Version 1 instances render as before, and Interpret Footage ▸ Cineon Settings keeps its existing formula, which agrees with the version 2 Converter at Gamma 1.
The public Cineon Converter documentation (https://helpx.adobe.com/after-effects/using/utility-effects.html) describes Gamma as a midtone control and gives no defaults or formula. The default, the Log to Linear curve and the Log to Log behavior come from running and scripting After Effects 26.5 on my own machine and reading back the rendered pixels. In After Effects, choosing Log to Log also sets Gamma to 1 and Highlight Rolloff to 0; EffectCraft does not do that yet, because no command sets one parameter from another.
Animation preset format 3 records `cineonVersion` for a saved Gamma property and stores effect key times relative to the first key. Presets in formats 1 and 2 without that tag contain version 1 Gamma values; format 2 already has relative effect key times. Applying a whole old Cineon Converter also gives it version 1. Exposed Essential Properties Gamma values convert to the target converter version where their target is unambiguous (the conversion keeps the linear point; other Gamma values follow each version's own curve); enabled expressions on another scale are skipped instead of rewriting their source.
A saved Gamma records the Version its converter has at the current time. Applied to a converter whose Version is keyframed, a Gamma preset keeps those keys: the Gamma is converted to the one version they hold, or skipped when they hold several or an expression sets the Version. A preset that also holds the Version sets it from that property.
The project schema remains 2. `docs/architecture.md` describes the behavior above.
## Validation
Effect tests check version 2 Log to Linear at Gamma 1.7 (codes 95 to 685) and Gamma 2.2 (codes 180 to 620), and Log to Log at Gamma 1 (Rolloff 0 and 20) and Gamma 1.7, against the measured 8-bit values within one or two codes, plus round trips, version 1 rendering and the Interpret Footage agreement at Gamma 1. GPU tests compare the version 2 paths with the CPU. Engine tests cover old projects, Reset, presets, keyframes, and Essential Properties.
Commands run on `74d398c2`:
- `cargo fmt --all -- --check`
- `cargo clippy -p effectcraft-effects -p effectcraft-gpu -p effectcraft-project -p effectcraft-engine --all-targets -- -D warnings`
- `cargo test -p effectcraft-effects`: 546 passed (including `effects_doc_is_current`, so `docs/effects.md` needs no change), 1 ignored, plus 6
- `cargo test -p effectcraft-project`: 47 passed
- `cargo test -p effectcraft-gpu`: 253 passed, 1 ignored
- `cargo test -p effectcraft-engine`: 1,007 passed, 5 ignored, plus 27
* #3593: render_frame and render_preview tile `times` into one contact sheet
* contributors: credit andreaaazo by their GitHub profile name
* #3593: contact-sheet cells default to 320 px, sheets stay under 8000 px
With `times`, `max_side` now defaults to 320 per cell instead of 960, so
64 frames of a 16:9 comp make a 2560 x 1440 sheet instead of 7680 x 4320.
`sheet::MAX_SIDE` drops from 8192 to 7680. `labels` that isn't true or
false is a bad-arguments error, and a bridged cell keeps the time asked
for when the app's reply leaves `time` out.
CPU / GPU comparisons at the new ends for Venetian Blinds (width 1, width
and feather 32000), Radial Wipe (feather 32000), Grid (border 2000),
Scatter (1000), Beam (4000), Change Color (1710 degrees) and Turbulent
Displace (seed 100000). The comparison counts infinity on both sides as
equal, so Levels (Individual Controls) gets a direct check that the GPU's
output is finite at the ends of its ranges. The Noise HLS test asserts the
spec's ranges, so it fails without them.
The 1e6 bound also capped curves that were finite before (gamma 0.1 on an
HDR value 4 x Input White is 4^10, about 1.05e6). The bound is now 1e30:
1e30 times the widest output range (2e4) is still finite, and every curve
below it renders as before. A test pins 4^10.
Random Seed takes 0..100000, After Effects' recorded valid range (and what
the other effects' Random Seed already takes). The CPU and GPU hash it the
same way with wrapping u32 arithmetic, so any seed costs the same.
Default and slider are unchanged.
Scale Height and Scale Width take -30000..30000 %, After Effects' recorded
valid range in the same units. The CPU and GPU share the matrix
(transform_matrix_px) and the buffer growth, which is capped at 16 Mpx
(transform_grow; the CPU test already renders 100000 %), so larger scales
stay bounded.
Default and slider are unchanged.
Starting and Ending Thickness take 0..4000, After Effects' recorded valid
range in the same units (pixels). The CPU and GPU renderers draw the beam
per pixel from its distance to the segment, within the layer's buffer, so
a thicker beam costs the same.
Default and slider are unchanged.
Scatter Amount takes 0..1000, After Effects' recorded valid range in the
same units (pixels); the slider stays 0..127. The CPU and GPU renderers move
each pixel by one random offset of up to the amount, so a larger amount
costs the same; samples outside the layer are transparent.
Default and slider are unchanged.
Feather takes 0..32000, After Effects' recorded valid range in the same
units. The CPU and GPU renderers evaluate the feather per pixel in closed
form (a Gaussian of the distance to the wedge, radial_wipe_alpha), so a
wide feather costs the same and stays finite.
Default and slider are unchanged.
Width takes 1..32000 and Feather 0..32000, After Effects' recorded valid
ranges in the same units (pixels). The work stays bounded: the renderers
floor the width at 1 buffer pixel, sum at most 40 Gaussian terms per
pixel, and above 8 widths the feather is the even veil
(venetian_cover; the GPU hands that case to the CPU, as before).
Default and slider are unchanged.
Border takes 0..2000, After Effects' recorded valid range in the same units
(pixels). The CPU and GPU renderers compute the border per pixel in closed
form, so a wider border costs the same; one wider than the cells covers
them.
Default and slider are unchanged.
Hue Transform takes -1800..1800 degrees, After Effects' recorded valid range
in the same units. The CPU and GPU renderers wrap the hue (rem_euclid /
fract_euclid), so five turns render like the hue they end on, at the same
cost.
Default and slider are unchanged.
Hue, Lightness and Saturation go up to 1000 % and Grain Size down to 0 (it
keeps its wider maximum, 100), After Effects' recorded valid ranges in the
same units. Noise HLS Auto shares the controls and widens with them.
Defaults and sliders are unchanged.
The renderers need no change: hue wraps, lightness and saturation clamp per
pixel after the noise is added, and Grain Size is floored at 0.1 px on the
CPU and the GPU, so the new values cost the same and stay finite.
The amounts were written as "percent" in keyframe text because their range
was 0..100, and Grain Size would become "percent" at 0..100; UNITS rows keep
the units they had.
Blend goes up to 10000 (it keeps its minimum of 1, below After Effects' 5)
and Jitter up to 500 %, After Effects' recorded valid ranges in the same
units. Defaults and sliders are unchanged.
The CPU and GPU renderers capped Jitter's dither at 100 %, so higher values
would be stored but render as 100. Both now take it from one function,
four_color_jitter, which keeps the dither linear up to 500 %. Blend 10000
is a finite softening (Blend squared) at the same cost.
Jitter was written as "percent" in keyframe text because its range was
0..100; a UNITS row keeps that unit.
Input/Output Black and White of every channel take -10000..10000 and Gamma
goes down to 0 (it keeps its wider maximum, 10), After Effects' recorded
valid ranges in the same units (the .aep mapping is Conv::Plain). Defaults
and the 0..1 / 0.1..3 sliders are unchanged.
Gamma 0 renders as the existing 0.01 floor, an exponent of 100, so an HDR
value a few times Input White would overflow f32 and an infinite curve
times an empty output range is NaN. The curve is now bounded at +-1e6 on
the CPU (Lv::apply) and the GPU (fxt_lv), so the output stays finite over
the whole range; values below the bound are unchanged.
The engine regression (tests/effect_ranges.rs) sets both ends of each row
through prop.set, checks undo/redo, save and reopen, and that a project
saved with the narrower ranges opens with the new ones and its values.
Move the LUT cache that follows files by size and modification time into
effects::file_cache and use it for ocio::lut::load_file and
ocio_config::load_config. A config's entry depends on the .ocio file, the LUTs
its FileTransforms read and the search-path places it looked for missing ones.
check_lut_files and lut_generation now cover all three caches.