* M10 #5130: resolve Windows printer-default duplex before spooling
* M10 #5130: document printer duplex resolution
* M10 #5130: adopt DocumentDuplex driver fix from craft-print
* M10 #5130: adopt two-sided capability selection fix
* M10 #5130: update documented craft-print revision
* M10 #5130: fall back when Windows duplex defaults cannot be read
* fix(print): satisfy duplex review formatting and refresh shared pin
* Repin craft-print to craft-libs main (#411 and #133 merged); ask only the picked printer's driver for two-sided support
craft-libs b6b8a55b has #411 (DocumentDuplex) and #133 (two_sided(name)). The
Printer default support check now reads that one driver instead of listing
every printer's capabilities at submit time (#2192).
---------
Co-authored-by: robertobulltech <341520377+robertobulltech@users.noreply.github.com>
Co-authored-by: FredApps <153173854+FredApps@users.noreply.github.com>
* fix(print): M10 — Windows ya no cambia las letras de las fuentes TrueType incrustadas (#3132)
Un subconjunto TrueType incrustado numera sus glifos de nuevo (en el
subconjunto de Arial de ReportLab el espacio es el glifo 11; en la Arial
instalada, el 3). Al imprimir en Windows, Windows.Data.Pdf → Direct2D →
XPS conservaba esos números de glifo pero los dibujaba con la fuente
instalada del mismo nombre: «Revisión» salía como «Wj{nxn» y la «z» en
negrita como «Ä», tanto en las colas Brother como en la impresora Adobe PDF.
La copia que va a la cola de Windows renombra ahora cada programa
TrueType/OpenType incrustado como PdfCraftPrint<n>, en su tabla name
y en el PDF (/BaseFont, /FontName; el subconjunto conserva su etiqueta),
para que ninguna fuente instalada responda a ese nombre. Glifos,
codificaciones y /ToUnicode no cambian. CUPS y Guardar como PDF reciben
el PDF tal cual.
Tests: extremo a extremo con impose (la página se renderiza idéntica
antes y después, y el test falla sin el arreglo), fuentes que comparten
programa, Type 0, reescritura por plataforma de la tabla name y programas
dañados sin pánico. Falta comprobarlo en una impresora física con Windows.
Fixes#3132
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(print): M10 — solo se renombran en el PDF las fuentes cuyo programa se reescribe (#3132)
Si PdfCraft no puede leer o reescribir un programa incrustado (no es un
sfnt, está dañado o pasa de 64 MiB), ahora conserva también su /BaseFont
y su /FontName. Un visor que tampoco pueda cargarlo seguirá eligiendo el
sustituto por el nombre original («Arial») en vez de por PdfCraftPrint<n>.
Si no queda ningún programa reescrito, el PDF va a la cola tal cual.
Lo señaló CodeRabbit en el PR #4098. Test nuevo:
a_program_that_cannot_be_rewritten_keeps_its_name_in_the_pdf_too (falla
con el comportamiento anterior).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(print): M10 — el renombrado de fuentes para Windows decodifica contra un presupuesto total (#3132)
Cada programa ya tenía un tope de 64 MiB, pero un PDF con muchos
programas distintos podía sumar mucho trabajo de descompresión al
imprimir. Ahora todo el renombrado comparte un DecodeBudget de 512 MiB,
el mecanismo que main acaba de introducir en print. Agotado el
presupuesto, los programas que faltan conservan su nombre, igual que uno
ilegible.
Test nuevo: programs_past_the_shared_decode_budget_keep_their_names
(falla si se decodifica sin presupuesto).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(print): M10 — también se renombran los CIDFont escritos dentro de su fuente Type 0 (#3132)
Si /DescendantFonts lleva el CIDFont como diccionario en línea (en el
propio Type 0 o en un objeto array aparte), el recorrido no llegaba a
él. Cuando compartía programa con otra fuente, el programa se renombraba,
pero el Type 0, el CIDFont y su descriptor seguían diciendo «Arial», y
Windows podía volver a cruzarlos con la Arial instalada. Ahora el Type 0
se trata en el mismo recorrido, sin el segundo que hacía type0_names: un
CIDFont en línea apunta su programa, y al renombrar se cambian el Type 0,
el CIDFont y su descriptor en línea.
Lo señaló CodeRabbit en el PR #4098. Test nuevo:
a_cidfont_written_inside_its_type0_font_is_renamed_with_it (falla sin el
arreglo).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(print): M10 — renamed_table ya no copia cada cadena de la tabla name (#3132)
renamed_table copiaba el texto de cada registro antes de comprobar el
tamaño del resultado: una tabla name de menos de 1 MB con 65.535
registros apuntando a una misma cadena de 65.535 bytes reservaba unos
4 GiB, y un fallo de reserva cierra el proceso al imprimir en Windows.
Ahora la tabla se lee entera sin copiar ningún texto (cada registro
guarda el offset y la longitud de origen) y después cada cadena distinta
se guarda una sola vez: los registros que compartían cadena la siguen
compartiendo y el almacén nunca pasa de lo que alcanzan los offsets de
16 bits. Una tabla que declara más registros de los que caben antes de
sus cadenas se rechaza de entrada.
Lo encontró RomanLis91 en el PR #4098. Tests nuevos:
records_that_share_one_string_keep_sharing_it (falla con el código
anterior) y a_name_table_claiming_more_records_than_fit_before_its_strings_is_refused.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* M10: the Print dialog remembers two-sided, grayscale, collate, sizing and comments & forms (#2001)
Persist the choices that describe how this computer prints and restore
them on the next launch, under the names doc_print takes; copies, pages,
layout, orientation and the printer still start fresh for each job.
Those names now live in one place, pdfcraft_print::names, used by the
tool and the settings file. Settings are untrusted: an unknown name or a
custom scale outside the dialog's 1..=1000 % keeps the default.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
* M10: the Print dialog also remembers a booklet's binding side (#2707)
Acrobat keeps the booklet binding (left or right) between prints;
PdfCraft started at Left every time. It is now kept with the other
remembered print choices, named as doc_print names it, and an unknown
saved value keeps the default.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* M10: Print starts each job's copies, pages, layout and orientation afresh (#2001)
CodeRabbit on #2103: the README promised that copies, pages, layout and orientation
start fresh, but open_print carried them over through `..keep` within a session.
ISO 32000-2 Table 147 initialises these per document when the print dialog opens
(NumCopies "typically 1", PrintPageRange), so each opening now resets them to the
defaults (Selected pages still win when thumbnails are picked); two-sided,
grayscale, collate, sizing, Comments & forms, binding, the paper and the printer
picked last carry over as before. Two-sided names now include "printer" (leave it to
the printer, main's default since #2422), so that choice is remembered too.
main's paper-persistence test expected grayscale not to persist; it is one of the
remembered preferences.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* M10: a new print job also resets its layout's own options and leaves Label (#2001)
CodeRabbit on #2103: resetting the layout to Size kept pages per sheet, order, borders,
booklet subset and the poster options through `..keep`, so choosing Multiple again
brought back, say, a cut-and-stack order; and a job printed on Label went back to Size
without giving back the paper Label replaced. open_print now leaves Label through
set_handling (#3564) and resets the layout's own options with the rest of the job's
choices; the binding and sizing stay remembered. The README now says what resets on
each opening and what carries over.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* M10: the Print dialog also remembers Print as image and its resolution (#6392)
A printer that needs pictures keeps getting them after a restart: as_image and
dpi are saved with the other print preferences and restored, a resolution the
dialog doesn't offer keeping the default 300 dpi. The bad-settings checks move
to their own test.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Pq7HyDBXygTf7jcqdsjcfn
---------
Co-authored-by: Claude Fable 5.1 <noreply@anthropic.com>
Co-authored-by: mtlcl410 <chuanlin@niar.org.tw>
* M10: macOS print jobs name their title and owner (#5743)
lp sends no com.apple.print.JobInfo.* attributes, and Kyocera's macOS
filter crashes without PMJobName and PMJobOwner, so the job stops with
cups-filter-crashed and nothing prints. Both go to lp as job options, in
the form lp_args passes on: printable ASCII, up to 64 bytes.
* M10: keep macOS job metadata as the name CUPS should send (#5743)
Review of #5757, checked against this Mac's libcups in memory:
- `'` and `\` were consumed as quoting and `{` opened a collection, and a
bare true/false became a boolean, so a filter reading PMJobName got
nothing or the wrong type. They now become `_`, or the fallback.
- CUPS keeps the last of a repeated option, ignoring case, so the
defaults replaced a value a doc_print caller had set. They are now
added only for a key the job leaves out.
- Nothing proved the job info reached the spooler. A test now runs both
submit paths against a stand-in `lp` on PATH.
On macOS and Linux the job sent no orientation, so CUPS left a landscape
sheet unrotated and shrank it into the portrait paper named by `media`
(Letter, A4, ...). Printing in Landscape therefore came out as a small
landscape page on a portrait sheet.
Add `pdfcraft_print::cups_orientation`, which gives
`orientation-requested=4` when every sheet is landscape, and attach it to
the job in two places:
- the Print dialog (`print_now`);
- the headless `doc_print` tool, which builds its own spooler job, so the
automation tool and MCP server print the same way. An
`orientation-requested` the caller already chose in `options` stands.
Neither applies on Windows, whose print ticket sets the orientation. A
job that mixes orientations gets nothing, since the option applies to the
whole job.
Record the new test as evidence on the `print.orientation` parity entry,
saying what is still only checked by hand, and mention the option in the
print crate README's CUPS paragraph.
Checked against Apple's CUPS filters with a generic PostScript queue: a
792x612 sheet sent to Letter without the option stays unrotated at about
77% scale; with it the page is turned 90 degrees to fill the sheet. The
new test fails with the fix stubbed out.
ROADMAP.md: kept main's stage line and status lines, added this PR's status and log lines.
docs/roadmap.md: kept main's status lines and M8/M9/M10 rows (main had merged the duplicate M8
row), added this PR's status line and its M10 sentence.
crates/ui-egui/src/lib.rs: persist keeps main's `v` and its separately set keys; print_paper
set the same way.
crates/ui-egui/tests/print.rs: kept both sides' tests.
The Print dialog's Properties… ran lpoptions on the GUI thread with no
deadline, so a CUPS that stopped answering froze the window. The read
now runs on its own thread (the panel says so meanwhile, and a read
that dies offers nothing rather than waiting), and lpoptions gets ten
seconds through spool::output_within, which kills and reaps a command
at its deadline; the PPD's own defaults then stand. One UI string in
the 21 catalogues.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RUNQSPVXx3dDBabRZHAnjz
Adopt the canonical craft-print revision from craft-libs #28 so Windows printing uses the in-process Windows.Data.Pdf/XPS backend instead of PowerShell. Keep exact paper, orientation and scaling validation and the existing PDFCraft composition and permission checks.
Pin the reviewed winprint fork, scope its compile-time licence/advisory exceptions, and distinguish the earlier WDAC Sandbox exercise from the final pinned revision's Windows CI coverage. Physical printer output remains unverified.
Add worker-barrier regressions for Home-selected tool handoff and startup document ordering.
Fixes#1107
Co-authored-by: durtyrobbin <76844303+durtyrobbin@users.noreply.github.com>
Co-authored-by: Dimitar Klaturov <7221384+bulgariamitko@users.noreply.github.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: skylar taylor-barrick <hi@skylar.cc>
* Gates: fix two clippy failures on main
- ocr_ui: "Also recognize pages that already have text" used egui's own
checkbox, which clippy.toml disallows (#1184 landed beside #1173);
use widgets::checkbox like every other box.
- camera_edges: Rust 1.97's manual_range_contains; the rewrite keeps the
old answer for a NaN angle (false) with an is_finite check.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019ojKsSCHWk2AuyDTFMHCd7
* M10: print from the web build through the browser's print dialog (gap 4)
The web build had no printer: spool::submit refuses on wasm, so Print
could only download the print-ready PDF. Now its Print dialog offers
"Browser's print dialog" (the default there), which reaches every
printer the operating system knows.
- web_print: PdfCraft draws the print-ready PDF's sheets itself
(engine Exporter), one sheet a frame since wasm has no threads:
300 dpi up to 100 sheets, 200 up to 300, 150 up to 1,000, at most
64 MP a sheet and 1 GiB of PNGs a job. The PNGs become blob URLs
and print from a hidden srcdoc iframe, one sheet per page, margin 0.
- Chromium prints every page at the default @page size, so a sheet of
the paper's size turned sideways is rotated 90 degrees CCW onto it
(as drivers do); other sizes get named @page rules.
- Copies, two-sided and colour are greyed out (the browser's dialog
sets them). If print() is refused (e.g. a sandboxed frame), the
print-ready PDF downloads instead, with the reason.
- pdfcraft-print stays free of web APIs; six new strings in all 20
catalogs (ATTRIBUTION hashes refreshed); docs and parity updated,
gap 4 closed.
Verified in headless Chromium against a trunk build: three sheets at
300 dpi, the landscape sheet turned, no blank trailing page, and the
download fallback. Firefox and Safari not yet tried.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019ojKsSCHWk2AuyDTFMHCd7
---------
Co-authored-by: Claude <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* M10.5: Restore architectural paper presets and PDF scale controls
Port the missing paper catalog and scale controls from PR #599 onto the merged Windows printing implementation. Keep the spooler and background discovery from #847/#1007. Document the feature-by-feature audit and verification limits.
Assisted-by: OpenAI Codex
* Drop the provenance write-up and the screenshot example (the kittest covers the dialog)
* Refresh catalog hashes
---------
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* M10: Windows printing prints at actual size, off the UI thread (follow-up to #847)
- Sheets print at 100% on the driver's paper closest to their size, landscape
when wide, instead of being shrunk into .NET's default 1-inch margins
(about 76% on Letter) and never rotated. Each sheet is capped at ~64 MP so a
poster-sized sheet can't exhaust memory.
- PowerShell runs with CREATE_NO_WINDOW: the release app has no console, so
Windows opened one over the app for the whole job.
- The Print dialog lists printers in the background (the desktop app's
printer_source) and spools jobs on a worker thread, so Ctrl+P and long jobs
no longer freeze the UI. A list arriving late preselects the default only if
the user hasn't picked a printer.
- Parity evidence named a test that #847 renamed; xtask parity passes again.
The raster-only limit is now stated in the parity notes and README.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* M10: refresh catalog hashes in ATTRIBUTION.toml for the new print strings
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Print: Windows lists its printers and spools jobs (#756)
The Print dialog's printer list comes from Win32_Printer through PowerShell's
CIM (wmic is gone from Windows 11), and jobs are spooled by the embedded
windows_print.ps1: the in-box Windows.Data.Pdf renders each sheet at the
printer's own resolution and System.Drawing.Printing carries copies,
collation, duplex and colour as the job's settings. Both run through
powershell, so the Rust code touches no Win32 API. Fixes#756, with the
printer-not-showing duplicates #160, #244, #293, #465 and #644; CIM approach
from #452. On CI a paused Generic / Text Only test printer catches the job in
its queue; a parser test keeps the script valid PowerShell.
* Print: fix the Windows await helper and render the job on CI (dry run)
Real-machine testing found [System.WindowsRuntimeSystemExtensions]::GetMethods()
failing with 'does not contain a method named GetMethods': GetMethods is an
instance method of [Type], so it is called with '.', the form the canonical
WinRT-await snippets use, not '::'. The first CI run missed it because the
end-to-end test skipped silently when the runner refused the test printer, so
the script had never actually run.
The script now honours PDFCRAFT_PRINT_DRYRUN=1: render every sheet with
Windows.Data.Pdf to PNGs in the temporary folder and print nothing. The test
runs that half unconditionally, so CI exercises the whole WinRT path —
projection, await helpers, render — on any machine, while the paused-printer
half stays best-effort and prints why it skipped. Win32_Printer enumeration
asks only for Name and Default, so a machine with nine printers waits less.
* Tests: the find-options wait in the viewer test is a deadline too
4280f83 converted the frame-count waits in this test to deadlines after the
same 12-of-15 race under a full workspace test run, but left the first wait —
the one for the 'page' matches — on the old 60-frame loop, and it flaked the
same way on PR #847's CI. Same fix: wait up to 20 s for the 15 matches, then
assert.
* Print: list driverless CUPS destinations, not only permanent queues
The Print dialog's printer list came from `lpstat -p -d`, which lists only
permanent queues. A driverless IPP printer discovered on the network — the
standard setup on modern Linux desktops — has no permanent queue: only
`lpstat -e` (CUPS >= 1.7) names it, and CUPS builds a temporary queue when
`lp` sends it a job. Until now such printers were invisible and the dialog
showed only Save as PDF.
Enumerate `lpstat -e` alongside `lpstat -p -d` and merge the answers: queues
first, deduplicated, default still from `-d`; a spooler without `-e` keeps
today's behaviour and loses only the driverless names. The .deb/.rpm now
recommend cups-client so a machine without a print stack is not silently
printerless.
Fixes#652
Co-authored-by: ZCode (GLM-5.3) <noreply@z.ai>
* Print: fix the off-unix build and a driverless default's marker
`lpstat_e_command` is called only from `printers`' unix block, so off unix
it was dead code and CI's Windows clippy gate (`-D warnings`) failed to
build the crate. Gate it like its caller.
The default destination can itself be driverless — `lpoptions -d` names a
destination no queue exists for — and the merge appended it from
`lpstat -e` with `default: false`, so the dialog preselected the first
queue instead of the user's default. The `-d` default now marks the
appended entry too; the test covers it, and CRLF in `-e` output.
Co-authored-by: ZCode (GLM-5.3) <noreply@z.ai>
---------
Co-authored-by: ZCode (GLM-5.3) <noreply@z.ai>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
* Security: pipe print jobs to lp instead of a shared temp folder
On macOS, Linux and FreeBSD, Print wrote each job to
<temp>/pdfcraft-print-<pid>/job-<time>.pdf and passed that name to lp.
The folder name is predictable and was made with create_dir_all, which
accepts a folder another local user created first in a shared /tmp and
follows a symlink planted there; the job was then written with fs::write.
That user could read every printed document, or swap the file before lp
read it. The folder was also never removed.
The job now goes to lp on stdin, so nothing is written to disk. lp_args
no longer takes a file. The job is fed on its own thread while lp's
output is collected, so neither side can block on a full pipe; if that
thread can't be started, lp is stopped and an error returned rather than
a panic. When lp refuses a job before reading it (an unknown printer)
the user sees lp's message rather than a broken pipe. CUPS ends its reply
for a job read from stdin with "(0 file(s))", which reads as if nothing
was sent, so that is dropped from the message shown.
submit_via takes the spooler command so tests can run this test binary
as a stand-in lp on every platform; the new test failed on the old code
(it received the temp file as an argument and nothing on stdin).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Security: create a new digital ID file fresh, owner-only
Configure New Digital ID > Create picked the first free name with
`!p.exists()` and then wrote the .p12 with fs::write. That is
check-then-write: a file or link planted at the name between the two is
written through. exists() also follows links, so a dangling symlink
looked free and the private key was created wherever it pointed. The
file got default permissions, readable by other local users on most
Unix systems.
save_new_id_file now creates the file with create_new, never opening
anything already at the name, and with mode 0o600 on Unix. A taken name
moves on to the next ("<name> 2.p12", ...), including a folder, which
Windows reports as access denied rather than already exists. A failed
write removes the partial file.
The dangling-link test failed on the old code (the key was written
through the link); the hard-link and folder test guards the retry loop,
and a Unix-only test checks the 0o600 mode.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Security: never write the --control token through a planted link
write_control_file opened the --control path with create + truncate. A
symlink or hard link already at that path was followed: its target was
truncated and overwritten with the control token before set_permissions
ran, so the token could land in a file another user can read, and any
file the link pointed at was destroyed.
The JSON now goes to a fresh file next to the path, with a random name
(create_new, 0o600 on Unix, another name if one is taken, including a
folder on Windows), which is then renamed over the path. The rename
replaces a link instead of following it, a control file left by an
earlier run is still replaced as before, and a reader polling for the
file never sees it half-written. A failed write or rename removes the
temporary file.
The hard-link and symlink tests failed on the old code (the token was
written into the linked file); a third test covers replacing a previous
run's file, and the owner-only mode on Unix.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Contributors: credit jcl-bit as James Locke
My own entry in contributors/people.toml (AGENTS.md, Contributor
credits), added in my PR as asked there.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Brandon Thomas <echelon@gmail.com>
The app, crates, binaries, bundle id, packaging, icons, screenshots and docs are now
PdfCraft / pdfcraft (repo storytold/pdfcraft). On first launch the desktop app moves the
PrintCraft settings and crash-recovery folders to the new name, and both apps read settings
saved under the old storage key, so upgrades keep recent files, preferences and unsaved work.
The signing test fixtures keep their PrintCraft subject names (they are binary).
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>