diff --git a/crates/doc/src/text/area.rs b/crates/doc/src/text/area.rs
index 515f52627..7bb742f48 100644
--- a/crates/doc/src/text/area.rs
+++ b/crates/doc/src/text/area.rs
@@ -101,15 +101,24 @@ impl PathEffect {
     }
 }
 
-/// Type on a Path Options › Align to Path: which height of the type runs along the path.
+/// Type on a Path Options › Align to Path: which height of the type runs along the path. Each
+/// character is measured by its own font, size and vertical scale, and in vertical type by its own
+/// size and horizontal scale. An inline graphic moves as a character of its run would, by its
+/// run's vertical scale in vertical type too. These distances are VectorCraft's own values.
 #[derive(Clone, Copy, Debug, Default, PartialEq, Eq, Serialize, Deserialize)]
 #[serde(rename_all = "camelCase")]
 pub enum PathAlign {
-    /// The font's top edge: the type hangs below the path.
+    /// The top of the font's em box: the type hangs below the path. The em box is the font's
+    /// ideographic em box (from its `BASE` table, its typographic or `hhea` box, or its
+    /// ideographs), else an em box centered on the cap height, else a box whose top is 0.88 em
+    /// above the baseline. In vertical type the characters move half an em.
     Ascender,
-    /// The font's bottom edge: the type stands above the path.
+    /// The bottom of the font's bounding box, else the font's descent: the type stands above the
+    /// path. In vertical type the characters move half an em the other way.
     Descender,
-    /// Halfway between the ascender and the descender.
+    /// A line at half the height of the top of the font's H above the baseline, else at half its
+    /// cap height, else at the middle of its em box. In vertical type the characters stay on the
+    /// path.
     Center,
     /// The baseline (the default).
     #[default]
diff --git a/crates/engine/src/cmd/typemenu.rs b/crates/engine/src/cmd/typemenu.rs
index 872ceee4b..58b4e2e6b 100644
--- a/crates/engine/src/cmd/typemenu.rs
+++ b/crates/engine/src/cmd/typemenu.rs
@@ -56,7 +56,7 @@ pub fn specs() -> Vec<CommandSpec> {
             "Type on a Path Options…",
             ["Type", "Type on a Path"],
             None,
-            "{ids?|id?, start?: 0..1, end?: 0..1|null, flip?: bool, effect?: rainbow|skew|3dRibbon|stairStep|gravity, alignToPath?: ascender|descender|center|baseline, spacing?: pt} set the selected type on a path's options: start and end place its start and end brackets as fractions of the path's length (end null: the end of the path, or once round a closed path), and flip then turns the type to the other side of its path (the path runs the other way, the brackets swap ends); none given: query → the first object's {start, end, flip: false, effect, alignToPath, spacing}",
+            "{ids?|id?, start?: 0..1, end?: 0..1|null, flip?: bool, effect?: rainbow|skew|3dRibbon|stairStep|gravity, alignToPath?: ascender|descender|center|baseline, spacing?: pt} set the selected type on a path's options: start and end place its start and end brackets as fractions of the path's length (end null: the end of the path, or once round a closed path), and flip then turns the type to the other side of its path (the path runs the other way, the brackets swap ends); alignToPath runs each character's em box top (ascender), font bounding box bottom (descender), half the height of its H's top above the baseline (center) or baseline along the path, by the character's own font, size and vertical scale (vertical type: half an em either way, or none for center); none given: query → the first object's {start, end, flip: false, effect, alignToPath, spacing}",
             has_selection,
             path_options
         ),
diff --git a/crates/eps/src/import/tests_native.rs b/crates/eps/src/import/tests_native.rs
index 1a3ec8ff9..329c5fb86 100644
--- a/crates/eps/src/import/tests_native.rs
+++ b/crates/eps/src/import/tests_native.rs
@@ -4498,6 +4498,56 @@ fn aligned_type_round_a_circle_runs_along_its_path_as_the_file_lays_it_out() {
     }
 }
 
+/// Type aligned to a circle by its ascender, center or descender, in the default face at 12 pt: the
+/// file's baselines lie inside the path by the top of the face's em box (its `BASE` table's
+/// `ideo` -170 plus one em), half the height of its H's top (656 units) or the bottom of its
+/// bounding box (-295), and laid out, the type's baselines lie where the file has them.
+#[test]
+fn aligned_type_lies_as_far_from_its_path_as_the_file_lays_it_out() {
+    let k = 40.0 * 0.552_284_75;
+    let points = [
+        (90.0, 50.0),
+        (90.0, 50.0 - k),
+        (50.0 + k, 10.0),
+        (50.0, 10.0),
+        (50.0 - k, 10.0),
+        (10.0, 50.0 - k),
+        (10.0, 50.0),
+        (10.0, 50.0 + k),
+        (50.0 - k, 90.0),
+        (50.0, 90.0),
+        (50.0 + k, 90.0),
+        (90.0, 50.0 + k),
+        (90.0, 50.0),
+    ];
+    let all: Vec<(f64, f64)> = points.iter().map(|(x, y)| canvas(*x, *y)).collect();
+    let segment = |i: usize| (0..4).map(|j| format!("{} {}", all[i * 3 + j].0, all[i * 3 + j].1)).collect::<Vec<_>>().join(" ");
+    for (key, align, inside) in [
+        (0, vectorcraft_doc::PathAlign::Ascender, 0.83 * 12.0),
+        (2, vectorcraft_doc::PathAlign::Center, 0.328 * 12.0),
+        (1, vectorcraft_doc::PathAlign::Descender, -0.295 * 12.0),
+    ] {
+        let frame = format!(
+            "<< /0 << /0 [ 0 0 ] /1 << /0 [ {} ] >> /2 << /0 2 /6 [ 2.0 5.99 ] /11 << /2 {key} >> >> >> >>",
+            (0..4).map(segment).collect::<Vec<_>>().join(" ")
+        );
+        let radius = 40.0 - inside;
+        let doc = document_of(&[frame], &[round_story_with("abcdefgh", 5.0, radius, radius / 48.0, &format!("/0 << /0 [ 0 {inside:.3} ] >>"))]);
+        let art = native_with_text(&(layer("Back", true, &square(10, 10)) + &layer("Spare", false, &text_object(0))), &doc);
+        let r = import(&eps(&page_square(10, 10), &art)).unwrap();
+        let texts = text_of(&r.document.layers[1]);
+        assert_eq!(texts.len(), 1, "{align:?}: {:?}", r.warnings);
+        assert_eq!(texts[0].path_align, align);
+        let layout = vectorcraft_text::layout(vectorcraft_text::FontDb::global(), texts[0]);
+        assert_eq!(layout.glyphs.len(), 8);
+        // The four cubics stray up to 0.011 from the circle.
+        for g in &layout.glyphs {
+            let (x, y) = (g.origin.x + g.angle.cos() * g.advance * 0.5 - 50.0, g.origin.y + g.angle.sin() * g.advance * 0.5 - 50.0);
+            assert!((x.hypot(y) - radius).abs() < 0.02, "{align:?}: {} from the center, want {radius}", x.hypot(y));
+        }
+    }
+}
+
 #[test]
 fn threaded_area_type_flows_through_its_frames() {
     let frames = [
diff --git a/crates/text/src/fontdb.rs b/crates/text/src/fontdb.rs
index 99975cd2b..a95ac2dc5 100644
--- a/crates/text/src/fontdb.rs
+++ b/crates/text/src/fontdb.rs
@@ -49,6 +49,7 @@ pub use dirs::{
 use face::Instances;
 #[cfg(test)]
 pub(crate) use face::MAX_LIVE_INSTANCES;
+pub(crate) use face::PathAlignHeights;
 pub use face::{FALLBACK_FAMILY, FontFace, IcfMargins};
 pub(crate) use glyph_pen::FlipPen;
 #[cfg(not(target_arch = "wasm32"))]
diff --git a/crates/text/src/fontdb/build.rs b/crates/text/src/fontdb/build.rs
index 40bcb1df1..4946bbd84 100644
--- a/crates/text/src/fontdb/build.rs
+++ b/crates/text/src/fontdb/build.rs
@@ -75,6 +75,7 @@ pub(super) fn make_face(bytes: FontBytes, index: u32, spec: FaceStyle, path: Opt
         plans: std::sync::Mutex::new(Vec::new()),
         ideographic_centre: std::sync::OnceLock::new(),
         icf_margins: std::sync::OnceLock::new(),
+        path_align: std::sync::OnceLock::new(),
         colour_bitmaps,
         colour_layers,
         svg_glyphs,
diff --git a/crates/text/src/fontdb/face.rs b/crates/text/src/fontdb/face.rs
index 5ab31eeae..fa59ff8ee 100644
--- a/crates/text/src/fontdb/face.rs
+++ b/crates/text/src/fontdb/face.rs
@@ -193,6 +193,8 @@ pub struct FontFace {
     pub(super) ideographic_centre: std::sync::OnceLock<f64>,
     /// [`Self::icf_margins`], read once.
     pub(super) icf_margins: std::sync::OnceLock<IcfMargins>,
+    /// [`Self::path_align_heights`], read once.
+    pub(super) path_align: std::sync::OnceLock<PathAlignHeights>,
     /// Has `sbix` or `CBDT` strikes: colour bitmap glyphs ([`FontDb::glyph_image`]).
     pub(super) colour_bitmaps: bool,
     /// Has `COLR` colour glyphs ([`FontDb::glyph_colour`]).
@@ -212,6 +214,26 @@ pub struct IcfMargins {
     pub left: f64,
 }
 
+/// The heights above the baseline, in ems, that Type on a Path's Align to Path runs along the
+/// path ([`FontFace::path_align_heights`]). These are VectorCraft's own values.
+#[derive(Clone, Copy, Debug, Default, PartialEq)]
+pub(crate) struct PathAlignHeights {
+    /// Ascender: the top of the face's em box ([`FontFace::em_box_top`]).
+    pub(crate) top: f64,
+    /// Descender (negative): the bottom of the font's bounding box (`head`), else the face's
+    /// descent.
+    pub(crate) bottom: f64,
+    /// Center: half the height of the top of the H above the baseline in whole thousandths of an
+    /// em, else half the OS/2 cap height, else the middle of the em box.
+    pub(crate) center: f64,
+}
+
+/// The characters whose ink an ideographic face's em box is centered on, the first the face has.
+const EM_BOX_IDEOGRAPHS: [char; 4] = ['永', '鬱', '곬', '・'];
+
+/// A box-drawing character whose ink, in an ideographic face, is one em tall: the em box.
+const EM_BOX_CROSS: char = '┼';
+
 impl std::fmt::Debug for FontFace {
     fn fmt(&self, f: &mut std::fmt::Formatter<'_>) -> std::fmt::Result {
         write!(f, "FontFace({} {})", self.family, self.style)
@@ -462,6 +484,111 @@ impl FontFace {
         *self.icf_margins.get_or_init(|| self.icf_from_base().or_else(|| self.icf_from_glyphs()).unwrap_or_default())
     }
 
+    /// The lines Type on a Path's Align to Path runs along the path, in ems above the baseline
+    /// ([`PathAlignHeights`]): the top of the em box ([`Self::em_box_top`], else 0.88 em), the
+    /// bottom of the font's bounding box, and half the height of the top of the H.
+    pub(crate) fn path_align_heights(&self) -> PathAlignHeights {
+        *self.path_align.get_or_init(|| {
+            use skrifa::raw::TableProvider;
+            let em = self.upem;
+            let top = self.em_box_top().unwrap_or(0.88);
+            let bottom =
+                self.skrifa().and_then(|f| f.head().ok()).map(|h| f64::from(h.y_min()) / em).filter(|b| b.is_finite() && *b <= 0.0 && *b > -4.0);
+            // Measured from the baseline to the top of the H, as a cap height is, wherever its ink starts.
+            let cap = self.glyph_ink('H').map(|(_, top)| top / em).or_else(|| self.os2_cap_height()).filter(|c| c.is_finite() && *c < 2.0);
+            PathAlignHeights {
+                top,
+                bottom: bottom.unwrap_or(-self.descent / em),
+                center: cap.map_or(top - 0.5, |cap| (cap * 1000.0).round() / 2000.0),
+            }
+        })
+    }
+
+    /// The top of the face's em box, in ems above the baseline. A `BASE` table with an `ideo`
+    /// baseline gives it: its `idtp`, else one em above `ideo`. In a face whose OS/2 code pages
+    /// include Chinese, Japanese or Korean, it is the typographic ascender of the typographic box
+    /// (else, in a TrueType face, of the `hhea` box) when that box holds the ink of the first of 永,
+    /// 鬱, 곬 and ・ the face has, and is one em tall or leaves equal margins above and below the
+    /// ink; a face with none of them needs the box to be one em tall. Else it is the top of a ┼
+    /// one em tall, else the top of an em box centered on the ink. In any other face the em box is
+    /// centered on the cap height: the OS/2 value, else the lower of the tops of H and O in whole
+    /// thousandths of an em. `None` when none of these applies.
+    pub(crate) fn em_box_top(&self) -> Option<f64> {
+        use skrifa::raw::TableProvider;
+        let f = self.skrifa()?;
+        let em = self.upem;
+        let sane = |v: f64| (v.is_finite() && v.abs() < 4.0).then_some(v);
+        // A roman baseline below the ideographic one is a damaged table: the baselines are ignored.
+        if let Some(h) = f.base().ok().and_then(|b| b.horiz_axis()).and_then(Result::ok).and_then(base_values)
+            && let Some(&ideo) = h.get(b"ideo")
+            && h.get(b"romn").is_none_or(|&romn| romn >= ideo)
+        {
+            return sane(h.get(b"idtp").copied().unwrap_or(ideo + em) / em);
+        }
+        // ulCodePageRange1 bits 17 to 21: JIS/Japan, Chinese Simplified, Korean Wansung, Chinese
+        // Traditional and Korean Johab.
+        let cjk = f.os2().ok().and_then(|o| o.ul_code_page_range_1()).is_some_and(|r| r & (0b1_1111 << 17) != 0);
+        if !cjk {
+            let lower_top = || {
+                let ((_, h), (_, o)) = (self.glyph_ink('H')?, self.glyph_ink('O')?);
+                Some((h.min(o) / em * 1000.0).round() / 1000.0)
+            };
+            let cap = self.os2_cap_height().or_else(lower_top).filter(|c| c.is_finite() && *c > 0.0 && *c < 2.0)?;
+            return Some((cap + 1.0) * 0.5);
+        }
+        // Heights in 65,536ths of an em, as the em box is kept.
+        let units = |v: f64| (v / em * 65536.0).round();
+        let ink = EM_BOX_IDEOGRAPHS.into_iter().find_map(|c| self.glyph_ink(c));
+        // A variable font's MVAR table moves the OS/2 typographic ascender (`hasc`) and descender
+        // (`hdsc`); it has no tags for the `hhea` ascender and descender, which do not vary:
+        // https://learn.microsoft.com/en-us/typography/opentype/spec/mvar
+        let varied = |tag: &[u8; 4]| {
+            f.mvar().ok().and_then(|m| m.metric_delta(skrifa::Tag::new(tag), self.location().coords()).ok()).map_or(0.0, |d| d.to_f64())
+        };
+        let typo = f
+            .os2()
+            .ok()
+            .map(|o| (f64::from(o.s_typo_ascender()) + varied(b"hasc"), f64::from(o.s_typo_descender()) + varied(b"hdsc")))
+            .filter(|(ascent, descent)| ascent > descent)
+            .or_else(|| {
+                let truetype = f.table_data(skrifa::Tag::new(b"glyf")).is_some();
+                f.hhea().ok().filter(|_| truetype).map(|h| (f64::from(h.ascender().to_i16()), f64::from(h.descender().to_i16())))
+            })
+            .filter(|(ascent, descent)| ascent > descent);
+        if let Some((ascent, descent)) = typo {
+            let one_em = units(ascent - descent) == 65536.0;
+            let holds = match ink {
+                None => one_em,
+                Some((lo, hi)) => hi <= ascent && lo >= descent && (one_em || units((ascent - hi) - (lo - descent)).abs() <= 197.0),
+            };
+            if holds {
+                return sane(ascent / em);
+            }
+        }
+        if let Some((lo, hi)) = self.glyph_ink(EM_BOX_CROSS)
+            && (65535.0..=65537.0).contains(&units(hi - lo))
+        {
+            return sane(hi / em);
+        }
+        ink.and_then(|(lo, hi)| sane((lo + hi) / em * 0.5 + 0.5))
+    }
+
+    /// The bottom and top of the ink of `c`'s glyph, in font units; `None` when the face has no
+    /// glyph for it, or the glyph has no ink.
+    fn glyph_ink(&self, c: char) -> Option<(f64, f64)> {
+        let g = self.glyph_for(c);
+        if g == 0 {
+            return None;
+        }
+        let b = self.skrifa()?.glyph_metrics(Size::unscaled(), self.location()).bounds(GlyphId::new(g))?;
+        Some((f64::from(b.y_min), f64::from(b.y_max))).filter(|(lo, hi)| hi > lo)
+    }
+
+    /// The cap height of the OS/2 table, in ems; `None` without one.
+    fn os2_cap_height(&self) -> Option<f64> {
+        self.skrifa()?.metrics(Size::unscaled(), self.location()).cap_height.map(|c| f64::from(c) / self.upem).filter(|c| *c > 0.0)
+    }
+
     /// The height of the face that a font size measures with `reference`, in ems: 1 for the em
     /// box; the cap height or x height of its OS/2 table; the height of its ideographic character
     /// face ([`Self::icf_margins`]), or across a `vertical` line its width. None for a face whose
diff --git a/crates/text/src/layout/on_path.rs b/crates/text/src/layout/on_path.rs
index 14bc3ef4b..aafe17531 100644
--- a/crates/text/src/layout/on_path.rs
+++ b/crates/text/src/layout/on_path.rs
@@ -6,6 +6,7 @@ use super::{
     Affine, ArcPath, BezPath, Ctx, GlyphBend, Justify, LineInfo, ListMarker, ParamCurve, PathAlign, PathData, PathEffect, PathEl, Point, Range,
     SGlyph, Shape, TextObject, Vec2, style_metrics,
 };
+use crate::fontdb::PathAlignHeights;
 
 /// The distance along type on a path each glyph takes: its advance measured `spacing` points above
 /// the path (Type on a Path Options › Spacing), so glyphs close up round the outside of a curve and
@@ -315,16 +316,25 @@ pub(super) fn on_path(cx: &mut Ctx<'_>, paras: &[Range<usize>], t: &TextObject,
         cx.out.overflow = true;
         fits = sg.get(fit..).and_then(|rest| rest.iter().map(|g| g.byte).min()).unwrap_or(text_len);
     }
-    // Align to Path: how far down (glyph space) the type moves to run its ascender, centre or
-    // descender along the path instead of its baseline.
-    let rise = match t.path_align {
-        PathAlign::Baseline => 0.0,
-        PathAlign::Ascender => m.0,
-        PathAlign::Descender => -m.1,
-        PathAlign::Center => (m.0 - m.1) * 0.5,
+    // Align to Path: how far down (glyph space) a glyph moves to run the top of its em box, half the
+    // height of the top of its H or the bottom of its font's bounding box along the path instead of its
+    // baseline, each glyph by its own face, size and vertical scale. In vertical type the glyph
+    // moves half its em (with its horizontal scale) for Ascender and Descender, and stays for Center.
+    // An inline graphic moves as a character of its run would, by its run's vertical scale in both.
+    let vertical = cx.vertical;
+    let rise_of = |g: &SGlyph| {
+        let em = g.face.units_per_em() * if vertical { g.sx } else { g.sy };
+        let h = if vertical { PathAlignHeights { top: 0.5, bottom: -0.5, center: 0.0 } } else { g.face.path_align_heights() };
+        match t.path_align {
+            PathAlign::Baseline => 0.0,
+            PathAlign::Ascender => h.top * em,
+            PathAlign::Descender => h.bottom * em,
+            PathAlign::Center => h.center * em,
+        }
     };
     let mut x = 0.0;
     for (g, &step) in sg.iter().zip(&steps).take(fit) {
+        let rise = rise_of(g);
         let s = s0 + x;
         let (p, dir) = ap.at(s + step * 0.5);
         let angle = dir.y.atan2(dir.x);
diff --git a/crates/text/src/test_fonts.rs b/crates/text/src/test_fonts.rs
index 00c994467..cbb2c20d2 100644
--- a/crates/text/src/test_fonts.rs
+++ b/crates/text/src/test_fonts.rs
@@ -1073,6 +1073,160 @@ pub fn tall_ideograph_font() -> Option<Vec<u8>> {
     Some(data)
 }
 
+/// A family of [`path_align_font`]: OS/2 cap height 660, H and O.
+pub const PATH_ALIGN_ROMAN_FAMILY: &str = "Pathalign Roman Sans";
+/// A family of [`path_align_font`]: no cap height, no H or O, and a `head` box above the baseline.
+pub const PATH_ALIGN_BARE_FAMILY: &str = "Pathalign Bare Sans";
+/// A family of [`path_align_font`]: a `BASE` table with `ideo` at -150 and no `idtp`.
+pub const PATH_ALIGN_BASE_FAMILY: &str = "Pathalign Base Sans";
+/// A family of [`path_align_font`]: Japanese code page, 永 on the ⌠ outline (ink -51 to 949).
+pub const PATH_ALIGN_IDEOGRAPH_FAMILY: &str = "Pathalign Ideograph Sans";
+/// A family of [`path_align_font`]: as [`PATH_ALIGN_IDEOGRAPH_FAMILY`], with ┼ on the | outline
+/// (ink -250 to 750, one em).
+pub const PATH_ALIGN_CROSS_FAMILY: &str = "Pathalign Cross Sans";
+/// A family of [`path_align_font`]: Japanese code page, 永 on the H outline (ink 0 to 656), and a
+/// typographic box from -100 to 900.
+pub const PATH_ALIGN_TYPO_FAMILY: &str = "Pathalign Typo Sans";
+/// A family of [`path_align_font`]: as [`PATH_ALIGN_TYPO_FAMILY`], with a typographic box of 0
+/// to 0 and an `hhea` box from -100 to 900.
+pub const PATH_ALIGN_HHEA_FAMILY: &str = "Pathalign Hhea Sans";
+/// A family of [`path_align_font`]: as [`PATH_ALIGN_TYPO_FAMILY`], as a variable font with one
+/// weight axis (400–700, named instances Regular and Bold) whose `MVAR` table raises the
+/// typographic ascender and descender by 100 at 700: a box from 0 to 1,000 in Bold.
+pub const PATH_ALIGN_VARIABLE_FAMILY: &str = "Pathalign Variable Sans";
+/// A family of [`path_align_font`]: Japanese code page, with no reference ideograph and no ┼.
+pub const PATH_ALIGN_NONE_FAMILY: &str = "Pathalign None Sans";
+/// A family of [`path_align_font`]: no cap height, and H and O swapped (H top 668, O top 656).
+pub const PATH_ALIGN_LOWER_FAMILY: &str = "Pathalign Lower Sans";
+/// A family of [`path_align_font`]: OS/2 cap height 660, O and no H, and a `BASE` table as
+/// [`PATH_ALIGN_BASE_FAMILY`]'s.
+pub const PATH_ALIGN_CAPITAL_FAMILY: &str = "Pathalign Capital Sans";
+/// A family of [`path_align_font`]: as [`PATH_ALIGN_IDEOGRAPH_FAMILY`], with a typographic box
+/// from -101 to 1,002: margins of 53 and 50 round 永's ink.
+pub const PATH_ALIGN_MARGINS_FAMILY: &str = "Pathalign Margins Sans";
+/// A family of [`path_align_font`]: as [`PATH_ALIGN_IDEOGRAPH_FAMILY`], with a typographic box
+/// from -101 to 1,003: margins of 54 and 50 round 永's ink.
+pub const PATH_ALIGN_UNEVEN_FAMILY: &str = "Pathalign Uneven Sans";
+/// A family of [`path_align_font`]: a `BASE` table with `ideo` at -150 and `romn` below it at
+/// -200.
+pub const PATH_ALIGN_DAMAGED_FAMILY: &str = "Pathalign Damaged Sans";
+
+/// The bundled Source Sans 3 Regular (1,000 units to the em, typographic box -326 to 1,000, `head`
+/// box bottom -295, H top 656, O top 668) without its `BASE` table, as one of the
+/// `PATH_ALIGN_*_FAMILY` faces, which map x, and H and O except where the family says otherwise.
+/// `None` when it can't be built.
+pub fn path_align_font(family: &str) -> Option<Vec<u8>> {
+    use write_fonts::tables::base::{Axis, Base, BaseCoord, BaseScript, BaseScriptList, BaseScriptRecord, BaseTagList, BaseValues};
+    use write_fonts::tables::mvar::{Mvar, ValueRecord};
+    use write_fonts::tables::variations::{ItemVariationData, ItemVariationStore, RegionAxisCoordinates, VariationRegion, VariationRegionList};
+    use write_fonts::types::MajorMinor;
+
+    let typo = family == PATH_ALIGN_TYPO_FAMILY || family == PATH_ALIGN_VARIABLE_FAMILY;
+    let ideograph = [PATH_ALIGN_IDEOGRAPH_FAMILY, PATH_ALIGN_CROSS_FAMILY, PATH_ALIGN_MARGINS_FAMILY, PATH_ALIGN_UNEVEN_FAMILY].contains(&family);
+    let japanese = typo || ideograph || [PATH_ALIGN_HHEA_FAMILY, PATH_ALIGN_NONE_FAMILY].contains(&family);
+    let mut mapping = vec![('x', 'x')];
+    match family {
+        PATH_ALIGN_BARE_FAMILY => {}
+        PATH_ALIGN_LOWER_FAMILY => mapping.extend([('H', 'O'), ('O', 'H')]),
+        PATH_ALIGN_CAPITAL_FAMILY => mapping.push(('O', 'O')),
+        _ => mapping.extend([('H', 'H'), ('O', 'O')]),
+    }
+    if ideograph {
+        mapping.push(('永', '⌠'));
+    }
+    if family == PATH_ALIGN_CROSS_FAMILY {
+        mapping.push(('┼', '|'));
+    }
+    if typo || family == PATH_ALIGN_HHEA_FAMILY {
+        mapping.push(('永', 'H'));
+    }
+    let mut data = remapped_source_sans(family, &format!("{}-Regular", family.replace(' ', "")), &mapping)?;
+    let tables: Vec<(Tag, usize)> = {
+        let font = skrifa::FontRef::new(&data).ok()?;
+        font.table_directory.table_records().iter().map(|r| (Tag::new(&r.tag().to_be_bytes()), r.offset() as usize)).collect()
+    };
+    for (tag, at) in tables {
+        if tag == Tag::new(b"OS/2") {
+            if japanese {
+                // ulCodePageRange1 at bytes 78 to 82: bit 17, JIS/Japan.
+                data.get_mut(at + 78..at + 82)?.copy_from_slice(&(1_u32 << 17).to_be_bytes());
+            }
+            if typo {
+                // sTypoAscender and sTypoDescender at bytes 68 to 72.
+                data.get_mut(at + 68..at + 72)?.copy_from_slice(&[900_i16.to_be_bytes(), (-100_i16).to_be_bytes()].concat());
+            }
+            if family == PATH_ALIGN_HHEA_FAMILY {
+                data.get_mut(at + 68..at + 72)?.copy_from_slice(&[0, 0, 0, 0]);
+            }
+            if family == PATH_ALIGN_MARGINS_FAMILY || family == PATH_ALIGN_UNEVEN_FAMILY {
+                let top: i16 = if family == PATH_ALIGN_MARGINS_FAMILY { 1002 } else { 1003 };
+                data.get_mut(at + 68..at + 72)?.copy_from_slice(&[top.to_be_bytes(), (-101_i16).to_be_bytes()].concat());
+            }
+            if family == PATH_ALIGN_BARE_FAMILY || family == PATH_ALIGN_LOWER_FAMILY {
+                // sCapHeight at bytes 88 to 90.
+                data.get_mut(at + 88..at + 90)?.copy_from_slice(&0_i16.to_be_bytes());
+            }
+        } else if tag == Tag::new(b"hhea") && family == PATH_ALIGN_HHEA_FAMILY {
+            // ascender and descender at bytes 4 to 8.
+            data.get_mut(at + 4..at + 8)?.copy_from_slice(&[900_i16.to_be_bytes(), (-100_i16).to_be_bytes()].concat());
+        } else if tag == Tag::new(b"head") && family == PATH_ALIGN_BARE_FAMILY {
+            // yMin at bytes 38 to 40.
+            data.get_mut(at + 38..at + 40)?.copy_from_slice(&10_i16.to_be_bytes());
+        }
+    }
+    // Source Sans 3's own `BASE` table (`ideo` -170) is left out.
+    let font = skrifa::FontRef::new(&data).ok()?;
+    let mut builder = FontBuilder::new();
+    if [PATH_ALIGN_BASE_FAMILY, PATH_ALIGN_CAPITAL_FAMILY, PATH_ALIGN_DAMAGED_FAMILY].contains(&family) {
+        let romn = if family == PATH_ALIGN_DAMAGED_FAMILY { -200 } else { 0 };
+        let tags = BaseTagList::new([b"ideo", b"romn"].map(Tag::new).to_vec());
+        let values = BaseValues::new(1, [-150, romn].map(BaseCoord::format_1).to_vec());
+        let latn = BaseScriptRecord::new(Tag::new(b"latn"), BaseScript::new(Some(values), None, vec![]));
+        let axis = Axis::new(Some(tags), BaseScriptList::new(vec![latn]));
+        builder.add_table(&Base::new(Some(axis), None)).ok()?;
+    }
+    if family == PATH_ALIGN_VARIABLE_FAMILY {
+        let region = VariationRegion::new(vec![RegionAxisCoordinates::new(F2Dot14::from_f32(0.0), F2Dot14::from_f32(1.0), F2Dot14::from_f32(1.0))]);
+        // Two delta sets (hasc, hdsc) of one 16-bit delta each for the one region.
+        let data = ItemVariationData::new(2, 1, vec![0], [100_i16.to_be_bytes(), 100_i16.to_be_bytes()].concat());
+        let store = ItemVariationStore::new(VariationRegionList::new(1, vec![region]), vec![Some(data)]);
+        let records = vec![ValueRecord::new(Tag::new(b"hasc"), 0, 0), ValueRecord::new(Tag::new(b"hdsc"), 0, 1)];
+        let axis = VariationAxisRecord {
+            axis_tag: Tag::new(b"wght"),
+            min_value: Fixed::from_i32(400),
+            default_value: Fixed::from_i32(400),
+            max_value: Fixed::from_i32(700),
+            flags: 0,
+            axis_name_id: NameId::new(256),
+        };
+        let instance = |name: u16, wght: i32| InstanceRecord {
+            subfamily_name_id: NameId::new(name),
+            flags: 0,
+            coordinates: vec![Fixed::from_i32(wght)],
+            post_script_name_id: None,
+        };
+        let fvar = Fvar::new(AxisInstanceArrays::new(vec![axis], vec![instance(257, 400), instance(258, 700)]));
+        let name = name_table(&[
+            (1, family),
+            (2, "Regular"),
+            (4, "Pathalign Variable Sans Regular"),
+            (6, "PathalignVariableSans-Regular"),
+            (256, "Weight"),
+            (257, "Regular"),
+            (258, "Bold"),
+        ])?;
+        builder.add_raw(Tag::new(b"name"), name);
+        builder.add_table(&fvar).ok()?.add_table(&Mvar::new(MajorMinor::VERSION_1_0, Some(store), records)).ok()?;
+    }
+    for r in font.table_directory.table_records() {
+        let tag = Tag::new(&r.tag().to_be_bytes());
+        if !builder.contains(tag) && tag != Tag::new(b"BASE") {
+            builder.add_raw(tag, font.table_data(r.tag())?.as_bytes());
+        }
+    }
+    Some(builder.build())
+}
+
 /// The family of [`soft_hyphen_outline_font`].
 pub const SOFT_HYPHEN_OUTLINE_FAMILY: &str = "Soft Hyphen Profile Sans";
 
diff --git a/crates/text/src/tests.rs b/crates/text/src/tests.rs
index af022b847..ef171316e 100644
--- a/crates/text/src/tests.rs
+++ b/crates/text/src/tests.rs
@@ -455,6 +455,158 @@ fn on_path_effects_orient_glyphs() {
     assert_eq!(PathEffect::parse("stair step"), Some(PathEffect::StairStep));
 }
 
+/// Type on a straight path from (0, 50) to (500, 50), one run per style: how far each glyph's
+/// baseline lies below the path under each Align to Path option, or with `ink` the middle of its
+/// drawn outline.
+fn path_align_drops(db: &FontDb, styles: &[CharStyle], vertical: bool, ink: bool) -> Vec<(vectorcraft_doc::PathAlign, Vec<f64>)> {
+    use vectorcraft_doc::PathAlign;
+    let mut line = BezPath::new();
+    line.move_to((0.0, 50.0));
+    line.line_to((500.0, 50.0));
+    let mut t = point("", style(12.0));
+    t.runs = styles.iter().map(|st| TextRun::new("x", st.clone())).collect();
+    t.kind = TextKind::OnPath { path: PathData::from_bezpath(&line), start: 0.0, end: None };
+    t.vertical = vertical;
+    [PathAlign::Baseline, PathAlign::Ascender, PathAlign::Center, PathAlign::Descender]
+        .into_iter()
+        .map(|align| {
+            t.path_align = align;
+            let drop = |g: &PositionedGlyph| {
+                let b = g.outline.bounding_box();
+                if ink { (b.y0 + b.y1) * 0.5 - 50.0 } else { g.origin.y - 50.0 }
+            };
+            (align, layout(db, &t).glyphs.iter().map(drop).collect())
+        })
+        .collect()
+}
+
+/// Align to Path moves each glyph's baseline off the path by its own face, size and vertical
+/// scale: Ascender by the top of an em box centered on the cap height, Center by half the height
+/// of the top of the H in whole thousandths of an em, Descender up by the bottom of the font's
+/// bounding box. Without an OS/2 cap height, the em box is centered on the lower of the tops of H
+/// and O; without an H, Center takes half the OS/2 cap height. A face with no cap height and no H
+/// or O takes an em box from 0.12 em below the baseline to 0.88 em above it and, with a bounding
+/// box above the baseline, its descent. Leading and horizontal scale do not count.
+#[test]
+fn on_path_align_runs_each_glyph_by_its_own_metrics() {
+    use crate::test_fonts::{PATH_ALIGN_BARE_FAMILY, PATH_ALIGN_CAPITAL_FAMILY, PATH_ALIGN_LOWER_FAMILY, PATH_ALIGN_ROMAN_FAMILY, path_align_font};
+    use vectorcraft_doc::PathAlign;
+    let db = FontDb::with_font_dirs(vec![]);
+    for family in [PATH_ALIGN_ROMAN_FAMILY, PATH_ALIGN_BARE_FAMILY, PATH_ALIGN_LOWER_FAMILY, PATH_ALIGN_CAPITAL_FAMILY] {
+        db.add_font(path_align_font(family).unwrap());
+    }
+    let bare = db.face(PATH_ALIGN_BARE_FAMILY, "Regular").unwrap();
+    let bare_descent = bare.vertical_metrics().1 / bare.units_per_em();
+    let st = |family: &str, size: f64| CharStyle { font_family: family.into(), ..style(size) };
+    let styles = [
+        st(PATH_ALIGN_ROMAN_FAMILY, 20.0),
+        st(PATH_ALIGN_ROMAN_FAMILY, 40.0),
+        CharStyle { v_scale: 200.0, ..st(PATH_ALIGN_ROMAN_FAMILY, 20.0) },
+        CharStyle { h_scale: 200.0, leading: Some(90.0), ..st(PATH_ALIGN_ROMAN_FAMILY, 20.0) },
+        st(PATH_ALIGN_BARE_FAMILY, 20.0),
+        st(PATH_ALIGN_LOWER_FAMILY, 20.0),
+        st(PATH_ALIGN_CAPITAL_FAMILY, 20.0),
+    ];
+    // Per em: the cap height is 0.66 em, the H 0.656 em tall, the bounding box's bottom -0.295 em;
+    // the lower face's H is 0.668 em tall and its O 0.656 em; the capital face's em box runs from
+    // its `BASE` table's `ideo` at -0.15 em.
+    for (align, drops) in path_align_drops(&db, &styles, false, false) {
+        let (roman, bare, lower, capital) = match align {
+            PathAlign::Baseline => (0.0, 0.0, 0.0, 0.0),
+            PathAlign::Ascender => ((0.66 + 1.0) / 2.0, 0.88, (0.656 + 1.0) / 2.0, 0.85),
+            PathAlign::Center => (0.328, 0.38, 0.334, 0.33),
+            PathAlign::Descender => (-0.295, -bare_descent, -0.295, -0.295),
+        };
+        let want = [roman * 20.0, roman * 40.0, roman * 40.0, roman * 20.0, bare * 20.0, lower * 20.0, capital * 20.0];
+        assert!(drops.len() == 7 && drops.iter().zip(want).all(|(d, w)| (d - w).abs() < 1e-6), "{align:?}: {drops:?}, want {want:?}");
+    }
+}
+
+/// The em box whose top Ascender runs along the path, by the kind of face: a `BASE` table's
+/// ideographic baseline, unless its roman baseline lies below it; in a face with a Chinese,
+/// Japanese or Korean code page, a typographic box that holds the ink of 永 and is one em tall or
+/// leaves margins within 197/65,536 em of each other, else a ┼ one em tall, else an em box
+/// centered on the ink of 永; else 0.88 em. Center measures the H, not the OS/2 cap height (0.7 em
+/// in the heights face).
+#[test]
+fn on_path_align_finds_the_em_box_of_each_kind_of_face() {
+    use crate::test_fonts::{
+        HEIGHT_FAMILY, PATH_ALIGN_BASE_FAMILY, PATH_ALIGN_CROSS_FAMILY, PATH_ALIGN_DAMAGED_FAMILY, PATH_ALIGN_HHEA_FAMILY,
+        PATH_ALIGN_IDEOGRAPH_FAMILY, PATH_ALIGN_MARGINS_FAMILY, PATH_ALIGN_NONE_FAMILY, PATH_ALIGN_TYPO_FAMILY, PATH_ALIGN_UNEVEN_FAMILY,
+        height_font, path_align_font,
+    };
+    use vectorcraft_doc::PathAlign;
+    let db = FontDb::with_font_dirs(vec![]);
+    let families = [
+        PATH_ALIGN_BASE_FAMILY,
+        PATH_ALIGN_IDEOGRAPH_FAMILY,
+        PATH_ALIGN_CROSS_FAMILY,
+        PATH_ALIGN_TYPO_FAMILY,
+        PATH_ALIGN_HHEA_FAMILY,
+        PATH_ALIGN_NONE_FAMILY,
+        PATH_ALIGN_MARGINS_FAMILY,
+        PATH_ALIGN_UNEVEN_FAMILY,
+        PATH_ALIGN_DAMAGED_FAMILY,
+    ];
+    for family in families {
+        db.add_font(path_align_font(family).unwrap());
+    }
+    db.add_font(height_font(true).unwrap());
+    let styles: Vec<CharStyle> = families.iter().chain([&HEIGHT_FAMILY]).map(|f| CharStyle { font_family: (*f).into(), ..style(10.0) }).collect();
+    let drops = path_align_drops(&db, &styles, false, false);
+    let of = |align: PathAlign| drops.iter().find(|(a, _)| *a == align).map(|(_, d)| d.clone()).unwrap();
+    // BASE -150 + one em; Japanese: the ⌠'s ink -51 to 949 centered, the | from -250 to 750, the
+    // typographic box -100 to 900, the `hhea` box -100 to 900 under an empty typographic box,
+    // nothing, the typographic box -101 to 1,002 (margins 3/1,000 em apart), the ink centered
+    // under a box -101 to 1,003 (4/1,000 em apart); a damaged BASE table's face by its cap height
+    // 660; the heights face's BASE `idtp` 880.
+    let want = [0.85, 0.949, 0.75, 0.9, 0.9, 0.88, 1.002, 0.949, 0.83, 0.88].map(|em| em * 10.0);
+    let ascender = of(PathAlign::Ascender);
+    assert!(ascender.len() == 10 && ascender.iter().zip(want).all(|(d, w)| (d - w).abs() < 1e-6), "{ascender:?}, want {want:?}");
+    let center = of(PathAlign::Center);
+    assert!((center[9] - 3.28).abs() < 1e-6, "{center:?}");
+}
+
+/// A variable font's instance takes its em box from the typographic box its `MVAR` table varies:
+/// from -100 to 900 in Regular, from 0 to 1,000 in Bold.
+#[test]
+fn on_path_align_takes_a_variable_font_instances_em_box() {
+    use crate::test_fonts::{PATH_ALIGN_VARIABLE_FAMILY, path_align_font};
+    use vectorcraft_doc::PathAlign;
+    let db = FontDb::with_font_dirs(vec![]);
+    db.add_font(path_align_font(PATH_ALIGN_VARIABLE_FAMILY).unwrap());
+    let st = |font_style: &str| CharStyle { font_family: PATH_ALIGN_VARIABLE_FAMILY.into(), font_style: font_style.into(), ..style(10.0) };
+    let drops = path_align_drops(&db, &[st("Regular"), st("Bold")], false, false);
+    let ascender = drops.iter().find(|(a, _)| *a == PathAlign::Ascender).map(|(_, d)| d.clone()).unwrap();
+    assert!(ascender.len() == 2 && (ascender[0] - 9.0).abs() < 1e-6 && (ascender[1] - 10.0).abs() < 1e-6, "{ascender:?}");
+}
+
+/// In vertical type, Align to Path moves the glyphs half an em, with their horizontal scale and not
+/// their vertical scale, for Ascender and Descender, and leaves them on the path for Center: their
+/// baselines and their drawn outlines both.
+#[test]
+fn on_path_align_in_vertical_type_moves_half_an_em() {
+    use crate::test_fonts::{PATH_ALIGN_ROMAN_FAMILY, path_align_font};
+    use vectorcraft_doc::PathAlign;
+    let db = FontDb::with_font_dirs(vec![]);
+    db.add_font(path_align_font(PATH_ALIGN_ROMAN_FAMILY).unwrap());
+    let st = CharStyle { font_family: PATH_ALIGN_ROMAN_FAMILY.into(), ..style(20.0) };
+    let styles = [st.clone(), CharStyle { h_scale: 200.0, ..st.clone() }, CharStyle { v_scale: 200.0, ..st }];
+    for ink in [false, true] {
+        let baseline = path_align_drops(&db, &styles, true, ink).first().map(|(_, d)| d.clone()).unwrap();
+        for (align, drops) in path_align_drops(&db, &styles, true, ink) {
+            let half = match align {
+                PathAlign::Ascender => 10.0,
+                PathAlign::Descender => -10.0,
+                _ => 0.0,
+            };
+            let want = [half, half * 2.0, half];
+            let moved: Vec<f64> = drops.iter().zip(&baseline).map(|(d, b)| d - b).collect();
+            assert!(moved.len() == 3 && moved.iter().zip(want).all(|(m, w)| (m - w).abs() < 1e-6), "{align:?}, ink {ink}: {moved:?}, want {want:?}");
+        }
+    }
+}
+
 #[test]
 fn on_path_circle_and_overflow() {
     let circle = kurbo::Circle::new((0.0, 0.0), 100.0).to_path(0.1);
diff --git a/docs/file-format-parity.md b/docs/file-format-parity.md
index fcd8da020..53e619277 100644
--- a/docs/file-format-parity.md
+++ b/docs/file-format-parity.md
@@ -219,7 +219,7 @@ private editing data. VectorCraft:
 
 ### Illustrator's private editing data
 
-the app's own editing copy of a file (an EPS after its `%%EOF`, a `.ai`'s `AIPrivateData` streams, a PDF's `AIPDFPrivateData` streams when it was saved with the editing data (#868), Zstandard or zlib, the EPS's in ASCII85) is not documented as a whole. VectorCraft reads its structure: layers and sublayers (names, order, visibility, lock, printing, preview, dimming, colour), groups as they were nested, compound paths (painted by their last path, or the last painted one, with the paths of groups inside them kept as their paths: #1410), clipping groups and layer clipping (several clipping paths in a clipping group, a layer or an opacity mask's art clip to their intersection, and a compound path of clipping paths stays one clip; a filled clipping path keeps its fill, which paints under the art it clips, except the path of a mask that covers several layers, whose fill is read as a path of its own in the layer that holds the mask's path, and a compound clipping path whose subpaths paint differently, whose filled subpaths are read as a compound path of their own under the art it clips; clipping paths that would nest the art past the document's 32 levels stop the editing data from being read: #5789), object names, hidden and locked objects, fills and strokes (grey, CMYK, RGB, named and spot colours, spot colours defined in Lab with their Lab values (#1032), global process colours as global swatches at their tint; a stroke of width 0, `0 w`, on a path, a gradient-filled path, legacy type or in an art style comes in as a 0.25 pt hairline, as from PDF: #1671), linear and radial gradients, pattern fills with their patterns as pattern swatches (#1025), gradient and pattern names in the file up to their first newline (a name that another swatch, or a gradient or pattern defined earlier, already has is numbered "Sky 2"; a name without a newline is kept, and when another swatch has it, the pattern's swatch, or a named color sharing a gradient or pattern swatch's name, is numbered the same way), opacity, blend modes, isolation and knockout, embedded images where their matrix puts them, rotated ones too (#2269), with their alpha channel (CMYK images keep their ink amounts, as they do when a `.ai` opens from its PDF part, and an alpha channel that hides part of a CMYK image becomes a grayscale opacity mask), placed (linked) files as linked images in their place, each showing the low-resolution preview the file keeps of it until its file is found or relinked in the Links panel (#1264), with the folder the file keeps relative to the document's, where the link is looked for when its path is gone, guides, and every artboard where it is, with its center mark, cross hairs, video safe areas and video ruler pixel aspect ratio. VectorCraft reads `CropAreaActive`, an `/Int` in the dictionary that holds the artboard array, as the index of the active artboard in that array, and the file opens with that artboard active; without it, or when it names no artboard that opens, the first artboard is active. It also reads the Document Raster Effects Settings (resolution, color model, background, anti-alias, clipping mask, Add Around Object and Preserve Spot Colors), the author from the header's `%%For` (an EPS's own header when the editing data's has none), swatches for the header's `%%CMYKCustomColor` and `%%RGBCustomColor` colors that the document has none of, and `%%TemplateBox` in older files; a setting with a value of another type or out of range keeps its default. Objects on Path groups open live, with their path, their objects in order along it, Pivot and Rotate; one with a dragged spacing or other options opens as a plain group. A gradient with stops in the middle runs its whole ramp across its shape, and a gradient object does not pass its fill to the next path (#1390). An object whose art style is one fill and one stroke at most (solid colours, its own gradient, a variable-width profile) with Drop Shadow, Inner Glow, Outer Glow, Feather, Round Corners, Scribble, Offset Path, Outline Object, Outline Stroke, Convert to Shape, Tweak (only when it moves nothing) or Pucker & Bloat at 0 comes in as itself with them and their saved settings. A path, compound path or group (not a clipping group) whose only effect is Transform (not with copies or Random) or a Free Distort whose corners make a parallelogram comes in as itself with it too, when neither it nor anything in it paints with a gradient or pattern and everything in it is a path, compound path or group with no opacity mask and no effects of its own; Transform that scales, rotates or reflects needs nothing in it to be stroked. Twist as the only effect is read the same way on an unstroked path or compound path whose segments are all straight. One with more, other effects (Zig Zag, a Pucker & Bloat of another amount, a Free Distort with other corners), an effect setting that is not read (an unknown key, a missing or out-of-range value, a Scribble with a color of its own), dashes aligned to corners, a brush other than a Calligraphic or Art one, a Calligraphic brush with settings of its own or an angle that follows the path, or an Art brush other than the ones described next comes in as its drawn look (a group named after it). Objects in a symbol defined before the file's art styles section, as newer files write it, take the same styles as the layers' objects. A path with a Calligraphic brush otherwise comes in as the path, the brush on its stroke at the stroke's weight, which scales the brush (#372), and so does a path with an Art brush, whose weight scales the art across the path, when all of these hold: the brush stretches its art along the path, unflipped, at 100% in Tints; the path's settings are the brush's own, with no entry that isn't read, no variable width and no effects; its stroke isn't a swatch; and the art is paths, compound paths and groups in solid fills, with no strokes, masks or effects, and has some length along the path. A stroke takes the brush the Brushes panel keeps under its name, and one whose name the panel doesn't keep comes in as its drawn look. Type with an Art brush keeps its drawn look under the type. A Calligraphic brush's Pressure, Tilt, Bearing and Rotation come in as those channels (a 6D Art Pen's brushes vary with the pressure, the bearing and the barrel's rotation); its Stylus Wheel varies at random. The file's Calligraphic, Scatter, Art and Bristle brushes replace the default ones in the Brushes panel, in the file's order, also when the file comes in as its PDF part (a brush library has no layers); pattern brushes and brushes it can't read are left out with a note. When the file opens from its layers, the spot colors in the art of each brush that comes in become swatches, and that art's colors count toward the document's color mode, as a pattern's do. The swatches take at most 20,000 color names in all across the brush art, and each brush-art section keeps at most 20,000 names. Each name keeps its first definition, with the color operators' names before the gradient stops' names. A spot color past those limits makes no swatch, and its color still counts toward the color mode. A spot color that the page's art, a pattern or a symbol also defines keeps the value defined there. Type keeps its art style as a live appearance whatever its stack (an Art brush aside), so it can be retyped: each fill and stroke of the style's stack (solid colours, gradients and pattern fills, placed as the drawn look places them) with its own opacity, blend mode and effects, the effects on the whole object, and where the characters paint among them; the effects read are Warp, Offset Path, Outline Object, Outline Stroke, Transform (with copies, Transform Objects, Transform Patterns and Scale Strokes & Effects; not with Random), Free Distort, Pucker & Bloat, Twist, Zig Zag, Tweak (only when it moves nothing, the file holding none of its random outline), Drop Shadow, Inner Glow, Outer Glow, Feather, Round Corners, Scribble, Gaussian Blur, Bas Relief (its settings at their defaults) and Convert to Shape, and a style with others, or with an effect setting that isn't read, keeps the type's drawn look. Convert to Shape keeps its Rectangle, Rounded Rectangle or Ellipse, its Absolute or Relative size (a relative size in the file is added to each side) and its corner radius; a relative Ellipse, or a setting that isn't read, keeps the drawn look. The page's drawing of such a style isn't held to look like VectorCraft's where its drawn look lay. Gradients take their matrix (`Xm`, radials and skewed ones too), focal point and the order of stops sharing a ramp point; gradient meshes, a clipping path's own fill and its stroke, and the artboards' names are read too. `editingData: "always"` (`convert --editing-data`) opens a `.ai` or an Illustrator EPS from its editing data even where it draws differently from its page, which can be older, with a note. Type is made from the file's text document, whole and editable, shown or not: point type (its frame's matrix, which newer files leave out when it is neither turned nor scaled, read as none), area type (a story in several frames as threaded type) and type on a path, with its characters, fonts, size, leading, tracking, scaling, baseline shift, fill and stroke (grey, RGB or CMYK), alignment, indents and paragraph spacing (a character attribute a run doesn't set comes from its character style, then the style that one is based on, then the document's defaults); area type keeps its frame's Area Type Options rows and columns, the gutter between rows and the gutter between columns, and its first baseline (Fixed, Cap Height, Leading or x Height) with its minimum; type on a path keeps its frame's Type on a Path effect, Align to Path and Flip (a frame whose options set key 6 to true keeps their defaults), and the first frame's Spacing is fitted from the file's layout, not read from the dialog's value; the distance from the path under Align to Path comes from VectorCraft's font metrics, and on Arial at 24 pt it differs from the distance the file keeps by 1.1 pt (Ascender), 0.3 pt (Center) and 2.7 pt (Descender); the fit under Gravity does not reproduce the file's layout, and its glyphs can lie up to 7.4 pt from the positions the file keeps; the page's drawing of it (often in pieces) is left out. Vertical type keeps its orientation, its columns from right to left, and a run set to Tate-chu-yoko keeps that setting. When it makes the type of every text object that shows, the page's type is only compared with it, each text object keeps its own group, frame and layer, and a line break inside a paragraph stays one. Where it can't make a text object's type (a frame of another kind), that text object takes the page's type where the text document puts its lines, or else what is left of the page's type in painting order (no group around it); the page's type where made type draws stays that type's, and hidden type is left out with a note. Text wrap is read too: an object whose dictionary has the wrap options (offset and Invert Wrap), or any graphic of a legacy wraparound group (`*w` … `*W`, before or after its type, with no offset), is a wrap object, and area type below it in its layer flows around it when the file opens, threaded type included (#2763). Kerning, underline and the other character and paragraph options aren't read yet. A `.ai` saved without PDF compatibility (a placeholder page) opens from its editing data alone, its point type, area type and type on a path made from the text document. A `.ai` whose PDF part shows only text isn't taken for that placeholder when its page states an art, trim or bleed box: it opens from its editing data alone where that reads, else from its PDF part (#1387). A `.ai` whose PDF part draws nothing at all (an empty page, with or without those boxes) opens from its editing data alone where that reads too: there is no page art to check its layers against, and the empty page would lose all of it. Text objects with an appearance keep their own text and frame, type of hidden layers stays hidden, and type on later artboards lands on its text objects (#1391); area type whose frame is too short for a line of the fallback font shows its first line (the frame is made taller, with a warning in the open result) (#1392). In a PDF saved with some of its artboards, the type on each page after the first goes to an artboard of that page's size after the previous page's artboard, and only to one that leaves an artboard for each later page; the first page's artboard also leaves one for each later page. When several artboards fit a later page, VectorCraft takes the one whose art draws most like the page, and compares at most 16 artboards for all the later pages together. Symbols are read into the Symbols panel, in the file's symbol list order, with their art, their registration point and the instances in their art, and their instances come in live with their matrix, name, hide, lock, opacity, blending mode, isolation, knockout and opacity mask; a symbol whose art isn't read whole (type, placed files, an image it leaves out or anything else it doesn't read) isn't kept. Symbols are read only with the layers: a file that comes in as its page or PDF part (editing data with no layers, layers that can't be read, or any of the cases below) opens with an empty Symbols panel. Instances of symbols it can't read, instances with appearance changes of their own (a dynamic symbol's), pattern fills whose pattern it can't read, placed files the data keeps no preview of and anything else it doesn't read make the file come in as its page (on a layer that doesn't show, they are left out of that layer), with a warning saying what. An unread object on a shown layer whose box can be found instead comes in as a group of the page's objects inside that box, named after it, with the rest of the layers and groups kept and a warning listing what came in as the page's art; the file still comes in as its page when live art or another unread object shares that page art, when the object spans two artboards or lies on an artboard that has no page, when no page art lies inside its box, when that page art is inside a page group with a clip, mask, transparency or appearance, when the object holds a frame of threaded type, when the page art uses a pattern, image or swatch that the page lacks or that differs from the editing data's, or when the page art doesn't carry its transparency (#4806). The layers' art is also compared with the page (by lightness, so colours written as their CMYK equivalents compare alike, and by whether a pixel is inked at all); the page is used when they differ by more than 5% (away from type, when all the type is made from the text document), where one draws an object the other doesn't (away from type, whose lines may be laid out afresh), and when an EPS whose page is its art's box has art printed outside it (#735). A `.ai` is not compared with its page, and its PDF part is not imported, when its text document makes the type of every text object (at least one shows, and none is drawn by the appearance of the layer or group it is in), no object is unread, no placed file has a second placement, no live envelope keeps its drawn art, it declares no large canvas, and its artboards are its pages' trim boxes one for one, in points or in the first page's `UserUnit`: it opens from its layers, with the bleed of its pages' bleed boxes. When they differ because some objects draw differently (an object in another color, or one that only one of them draws), each top-level object of the layers that holds such a difference comes in as a group of the page's objects inside its box and the layers stay, with a warning that names the layer or sublayer of each such object as the Layers panel shows it (`<Layer>` for one without a name) and how many came in from it; an export or Save As to the file's own path then needs `acknowledgeLoss: true`, and a wrap object replaced this way keeps its wrap options. The file still comes in as its page when only edges or type differ, when a difference lies outside every top-level object, when more than half of the top-level objects or more than 64 hold one, when such an object is or holds type or holds a wrap object inside a group, when the page's type of a text object that stays lies inside such an object's box, when the page's art can't replace such an object for one of the reasons above for an unread object, when matching the differences to the objects would take too much work, or when the result still differs from the page. `editingData: "always"` keeps the objects as read, and placed files at the other point their data gives are tried as well. An EPS whose page is its art's box keeps that page when it comes in through its layers, not the editing data's artboard, and a text object counts as drawn by the page by its colours, not only its lightness, so a red stroke stacked over a dark red one stays (#1102). `textAs: "outlines"` opens a `.ai` whose type shows from its PDF part, which has the outlines; `editingData: false` opens any of them as its page or PDF part only, for print pipelines (#735). A file whose import left something out (hidden text, art or layers) is never written over by an export or Save As to its own path unless `acknowledgeLoss: true` (`convert --replace-lossy`), so the original keeps what the document lacks. Where a `.ai` can't be read that way (or its layers are turned off in the import options), we read its PDF-compatible part, so Illustrator-only live objects arrive as appearance, and plain groups arrive ungrouped: that part draws each object on its own and marks only layers, clipping groups and groups with opacity, blending or a mask (those come back). Art outside the artboards isn't in that part at all (Illustrator's PDF part leaves it out), so it doesn't open; the import says so in a note (#472). Its pages still go where the editing data puts the artboards (a grid stays a grid), with the art on each, when it has as many artboards as pages, of the same sizes (#1068); the page of the artboard `CropAreaActive` names is then the active artboard. A `.ai` whose editing data has artboards but no layers also opens on that page under the same check, and its pages stay where they are. A `.ai` whose PDF part's pages are cropped to its art (each page the box of all the art, which is the editing data's bounding box) instead of its artboards opens from its layers, with its own artboards, where they draw as that page does. Its pages are laid out so that art one of them draws past its artboard (notes beside a design, which the part doesn't clip) doesn't lie over the page before it in the row, where it was taken for that page's art: the check against the editing data then found art its layers don't have there and opened the file as its PDF part, without the art outside the artboards. That part also has no paragraphs: area type is written line by line, and comes back as area type only where its font is installed and lays the lines out with the same breaks, else as a point type object per line (#508). Art off the page that a PDF does draw opens on the pasteboard.
+the app's own editing copy of a file (an EPS after its `%%EOF`, a `.ai`'s `AIPrivateData` streams, a PDF's `AIPDFPrivateData` streams when it was saved with the editing data (#868), Zstandard or zlib, the EPS's in ASCII85) is not documented as a whole. VectorCraft reads its structure: layers and sublayers (names, order, visibility, lock, printing, preview, dimming, colour), groups as they were nested, compound paths (painted by their last path, or the last painted one, with the paths of groups inside them kept as their paths: #1410), clipping groups and layer clipping (several clipping paths in a clipping group, a layer or an opacity mask's art clip to their intersection, and a compound path of clipping paths stays one clip; a filled clipping path keeps its fill, which paints under the art it clips, except the path of a mask that covers several layers, whose fill is read as a path of its own in the layer that holds the mask's path, and a compound clipping path whose subpaths paint differently, whose filled subpaths are read as a compound path of their own under the art it clips; clipping paths that would nest the art past the document's 32 levels stop the editing data from being read: #5789), object names, hidden and locked objects, fills and strokes (grey, CMYK, RGB, named and spot colours, spot colours defined in Lab with their Lab values (#1032), global process colours as global swatches at their tint; a stroke of width 0, `0 w`, on a path, a gradient-filled path, legacy type or in an art style comes in as a 0.25 pt hairline, as from PDF: #1671), linear and radial gradients, pattern fills with their patterns as pattern swatches (#1025), gradient and pattern names in the file up to their first newline (a name that another swatch, or a gradient or pattern defined earlier, already has is numbered "Sky 2"; a name without a newline is kept, and when another swatch has it, the pattern's swatch, or a named color sharing a gradient or pattern swatch's name, is numbered the same way), opacity, blend modes, isolation and knockout, embedded images where their matrix puts them, rotated ones too (#2269), with their alpha channel (CMYK images keep their ink amounts, as they do when a `.ai` opens from its PDF part, and an alpha channel that hides part of a CMYK image becomes a grayscale opacity mask), placed (linked) files as linked images in their place, each showing the low-resolution preview the file keeps of it until its file is found or relinked in the Links panel (#1264), with the folder the file keeps relative to the document's, where the link is looked for when its path is gone, guides, and every artboard where it is, with its center mark, cross hairs, video safe areas and video ruler pixel aspect ratio. VectorCraft reads `CropAreaActive`, an `/Int` in the dictionary that holds the artboard array, as the index of the active artboard in that array, and the file opens with that artboard active; without it, or when it names no artboard that opens, the first artboard is active. It also reads the Document Raster Effects Settings (resolution, color model, background, anti-alias, clipping mask, Add Around Object and Preserve Spot Colors), the author from the header's `%%For` (an EPS's own header when the editing data's has none), swatches for the header's `%%CMYKCustomColor` and `%%RGBCustomColor` colors that the document has none of, and `%%TemplateBox` in older files; a setting with a value of another type or out of range keeps its default. Objects on Path groups open live, with their path, their objects in order along it, Pivot and Rotate; one with a dragged spacing or other options opens as a plain group. A gradient with stops in the middle runs its whole ramp across its shape, and a gradient object does not pass its fill to the next path (#1390). An object whose art style is one fill and one stroke at most (solid colours, its own gradient, a variable-width profile) with Drop Shadow, Inner Glow, Outer Glow, Feather, Round Corners, Scribble, Offset Path, Outline Object, Outline Stroke, Convert to Shape, Tweak (only when it moves nothing) or Pucker & Bloat at 0 comes in as itself with them and their saved settings. A path, compound path or group (not a clipping group) whose only effect is Transform (not with copies or Random) or a Free Distort whose corners make a parallelogram comes in as itself with it too, when neither it nor anything in it paints with a gradient or pattern and everything in it is a path, compound path or group with no opacity mask and no effects of its own; Transform that scales, rotates or reflects needs nothing in it to be stroked. Twist as the only effect is read the same way on an unstroked path or compound path whose segments are all straight. One with more, other effects (Zig Zag, a Pucker & Bloat of another amount, a Free Distort with other corners), an effect setting that is not read (an unknown key, a missing or out-of-range value, a Scribble with a color of its own), dashes aligned to corners, a brush other than a Calligraphic or Art one, a Calligraphic brush with settings of its own or an angle that follows the path, or an Art brush other than the ones described next comes in as its drawn look (a group named after it). Objects in a symbol defined before the file's art styles section, as newer files write it, take the same styles as the layers' objects. A path with a Calligraphic brush otherwise comes in as the path, the brush on its stroke at the stroke's weight, which scales the brush (#372), and so does a path with an Art brush, whose weight scales the art across the path, when all of these hold: the brush stretches its art along the path, unflipped, at 100% in Tints; the path's settings are the brush's own, with no entry that isn't read, no variable width and no effects; its stroke isn't a swatch; and the art is paths, compound paths and groups in solid fills, with no strokes, masks or effects, and has some length along the path. A stroke takes the brush the Brushes panel keeps under its name, and one whose name the panel doesn't keep comes in as its drawn look. Type with an Art brush keeps its drawn look under the type. A Calligraphic brush's Pressure, Tilt, Bearing and Rotation come in as those channels (a 6D Art Pen's brushes vary with the pressure, the bearing and the barrel's rotation); its Stylus Wheel varies at random. The file's Calligraphic, Scatter, Art and Bristle brushes replace the default ones in the Brushes panel, in the file's order, also when the file comes in as its PDF part (a brush library has no layers); pattern brushes and brushes it can't read are left out with a note. When the file opens from its layers, the spot colors in the art of each brush that comes in become swatches, and that art's colors count toward the document's color mode, as a pattern's do. The swatches take at most 20,000 color names in all across the brush art, and each brush-art section keeps at most 20,000 names. Each name keeps its first definition, with the color operators' names before the gradient stops' names. A spot color past those limits makes no swatch, and its color still counts toward the color mode. A spot color that the page's art, a pattern or a symbol also defines keeps the value defined there. Type keeps its art style as a live appearance whatever its stack (an Art brush aside), so it can be retyped: each fill and stroke of the style's stack (solid colours, gradients and pattern fills, placed as the drawn look places them) with its own opacity, blend mode and effects, the effects on the whole object, and where the characters paint among them; the effects read are Warp, Offset Path, Outline Object, Outline Stroke, Transform (with copies, Transform Objects, Transform Patterns and Scale Strokes & Effects; not with Random), Free Distort, Pucker & Bloat, Twist, Zig Zag, Tweak (only when it moves nothing, the file holding none of its random outline), Drop Shadow, Inner Glow, Outer Glow, Feather, Round Corners, Scribble, Gaussian Blur, Bas Relief (its settings at their defaults) and Convert to Shape, and a style with others, or with an effect setting that isn't read, keeps the type's drawn look. Convert to Shape keeps its Rectangle, Rounded Rectangle or Ellipse, its Absolute or Relative size (a relative size in the file is added to each side) and its corner radius; a relative Ellipse, or a setting that isn't read, keeps the drawn look. The page's drawing of such a style isn't held to look like VectorCraft's where its drawn look lay. Gradients take their matrix (`Xm`, radials and skewed ones too), focal point and the order of stops sharing a ramp point; gradient meshes, a clipping path's own fill and its stroke, and the artboards' names are read too. `editingData: "always"` (`convert --editing-data`) opens a `.ai` or an Illustrator EPS from its editing data even where it draws differently from its page, which can be older, with a note. Type is made from the file's text document, whole and editable, shown or not: point type (its frame's matrix, which newer files leave out when it is neither turned nor scaled, read as none), area type (a story in several frames as threaded type) and type on a path, with its characters, fonts, size, leading, tracking, scaling, baseline shift, fill and stroke (grey, RGB or CMYK), alignment, indents and paragraph spacing (a character attribute a run doesn't set comes from its character style, then the style that one is based on, then the document's defaults); area type keeps its frame's Area Type Options rows and columns, the gutter between rows and the gutter between columns, and its first baseline (Fixed, Cap Height, Leading or x Height) with its minimum; type on a path keeps its frame's Type on a Path effect, Align to Path and Flip (a frame whose options set key 6 to true keeps their defaults), and the first frame's Spacing is fitted from the file's layout, not read from the dialog's value; the distance from the path under Align to Path is measured for each character at its size and vertical scale (in vertical type, its horizontal scale), from the top of its font's em box (Ascender), half the height of the top of its font's H (Center) or the bottom of its font's bounding box (Descender); the fit under Gravity does not reproduce the file's layout, and its glyphs can lie up to 7.4 pt from the positions the file keeps; the page's drawing of it (often in pieces) is left out. Vertical type keeps its orientation, its columns from right to left, and a run set to Tate-chu-yoko keeps that setting. When it makes the type of every text object that shows, the page's type is only compared with it, each text object keeps its own group, frame and layer, and a line break inside a paragraph stays one. Where it can't make a text object's type (a frame of another kind), that text object takes the page's type where the text document puts its lines, or else what is left of the page's type in painting order (no group around it); the page's type where made type draws stays that type's, and hidden type is left out with a note. Text wrap is read too: an object whose dictionary has the wrap options (offset and Invert Wrap), or any graphic of a legacy wraparound group (`*w` … `*W`, before or after its type, with no offset), is a wrap object, and area type below it in its layer flows around it when the file opens, threaded type included (#2763). Kerning, underline and the other character and paragraph options aren't read yet. A `.ai` saved without PDF compatibility (a placeholder page) opens from its editing data alone, its point type, area type and type on a path made from the text document. A `.ai` whose PDF part shows only text isn't taken for that placeholder when its page states an art, trim or bleed box: it opens from its editing data alone where that reads, else from its PDF part (#1387). A `.ai` whose PDF part draws nothing at all (an empty page, with or without those boxes) opens from its editing data alone where that reads too: there is no page art to check its layers against, and the empty page would lose all of it. Text objects with an appearance keep their own text and frame, type of hidden layers stays hidden, and type on later artboards lands on its text objects (#1391); area type whose frame is too short for a line of the fallback font shows its first line (the frame is made taller, with a warning in the open result) (#1392). In a PDF saved with some of its artboards, the type on each page after the first goes to an artboard of that page's size after the previous page's artboard, and only to one that leaves an artboard for each later page; the first page's artboard also leaves one for each later page. When several artboards fit a later page, VectorCraft takes the one whose art draws most like the page, and compares at most 16 artboards for all the later pages together. Symbols are read into the Symbols panel, in the file's symbol list order, with their art, their registration point and the instances in their art, and their instances come in live with their matrix, name, hide, lock, opacity, blending mode, isolation, knockout and opacity mask; a symbol whose art isn't read whole (type, placed files, an image it leaves out or anything else it doesn't read) isn't kept. Symbols are read only with the layers: a file that comes in as its page or PDF part (editing data with no layers, layers that can't be read, or any of the cases below) opens with an empty Symbols panel. Instances of symbols it can't read, instances with appearance changes of their own (a dynamic symbol's), pattern fills whose pattern it can't read, placed files the data keeps no preview of and anything else it doesn't read make the file come in as its page (on a layer that doesn't show, they are left out of that layer), with a warning saying what. An unread object on a shown layer whose box can be found instead comes in as a group of the page's objects inside that box, named after it, with the rest of the layers and groups kept and a warning listing what came in as the page's art; the file still comes in as its page when live art or another unread object shares that page art, when the object spans two artboards or lies on an artboard that has no page, when no page art lies inside its box, when that page art is inside a page group with a clip, mask, transparency or appearance, when the object holds a frame of threaded type, when the page art uses a pattern, image or swatch that the page lacks or that differs from the editing data's, or when the page art doesn't carry its transparency (#4806). The layers' art is also compared with the page (by lightness, so colours written as their CMYK equivalents compare alike, and by whether a pixel is inked at all); the page is used when they differ by more than 5% (away from type, when all the type is made from the text document), where one draws an object the other doesn't (away from type, whose lines may be laid out afresh), and when an EPS whose page is its art's box has art printed outside it (#735). A `.ai` is not compared with its page, and its PDF part is not imported, when its text document makes the type of every text object (at least one shows, and none is drawn by the appearance of the layer or group it is in), no object is unread, no placed file has a second placement, no live envelope keeps its drawn art, it declares no large canvas, and its artboards are its pages' trim boxes one for one, in points or in the first page's `UserUnit`: it opens from its layers, with the bleed of its pages' bleed boxes. When they differ because some objects draw differently (an object in another color, or one that only one of them draws), each top-level object of the layers that holds such a difference comes in as a group of the page's objects inside its box and the layers stay, with a warning that names the layer or sublayer of each such object as the Layers panel shows it (`<Layer>` for one without a name) and how many came in from it; an export or Save As to the file's own path then needs `acknowledgeLoss: true`, and a wrap object replaced this way keeps its wrap options. The file still comes in as its page when only edges or type differ, when a difference lies outside every top-level object, when more than half of the top-level objects or more than 64 hold one, when such an object is or holds type or holds a wrap object inside a group, when the page's type of a text object that stays lies inside such an object's box, when the page's art can't replace such an object for one of the reasons above for an unread object, when matching the differences to the objects would take too much work, or when the result still differs from the page. `editingData: "always"` keeps the objects as read, and placed files at the other point their data gives are tried as well. An EPS whose page is its art's box keeps that page when it comes in through its layers, not the editing data's artboard, and a text object counts as drawn by the page by its colours, not only its lightness, so a red stroke stacked over a dark red one stays (#1102). `textAs: "outlines"` opens a `.ai` whose type shows from its PDF part, which has the outlines; `editingData: false` opens any of them as its page or PDF part only, for print pipelines (#735). A file whose import left something out (hidden text, art or layers) is never written over by an export or Save As to its own path unless `acknowledgeLoss: true` (`convert --replace-lossy`), so the original keeps what the document lacks. Where a `.ai` can't be read that way (or its layers are turned off in the import options), we read its PDF-compatible part, so Illustrator-only live objects arrive as appearance, and plain groups arrive ungrouped: that part draws each object on its own and marks only layers, clipping groups and groups with opacity, blending or a mask (those come back). Art outside the artboards isn't in that part at all (Illustrator's PDF part leaves it out), so it doesn't open; the import says so in a note (#472). Its pages still go where the editing data puts the artboards (a grid stays a grid), with the art on each, when it has as many artboards as pages, of the same sizes (#1068); the page of the artboard `CropAreaActive` names is then the active artboard. A `.ai` whose editing data has artboards but no layers also opens on that page under the same check, and its pages stay where they are. A `.ai` whose PDF part's pages are cropped to its art (each page the box of all the art, which is the editing data's bounding box) instead of its artboards opens from its layers, with its own artboards, where they draw as that page does. Its pages are laid out so that art one of them draws past its artboard (notes beside a design, which the part doesn't clip) doesn't lie over the page before it in the row, where it was taken for that page's art: the check against the editing data then found art its layers don't have there and opened the file as its PDF part, without the art outside the artboards. That part also has no paragraphs: area type is written line by line, and comes back as area type only where its font is installed and lays the lines out with the same breaks, else as a point type object per line (#508). Art off the page that a PDF does draw opens on the pasteboard.
 the app's own editing copy of a file (an EPS after its `%%EOF`, a `.ai`'s `AIPrivateData` streams, a PDF's `AIPDFPrivateData` streams when it was saved with the editing data (#868), Zstandard or zlib, the EPS's in ASCII85) is not documented as a whole. VectorCraft reads its structure: layers and sublayers (names, order, visibility, lock, printing, preview, dimming, colour), groups as they were nested, compound paths (painted by their last path, or the last painted one, with the paths of groups inside them kept as their paths: #1410), clipping groups and layer clipping (several clipping paths in a clipping group, a layer or an opacity mask's art clip to their intersection, and a compound path of clipping paths stays one clip; clipping paths that would nest the art past the document's 32 levels stop the editing data from being read: #5789), object names, hidden and locked objects, fills and strokes (grey, CMYK, RGB, named and spot colours, spot colours defined in Lab with their Lab values (#1032), global process colours as global swatches at their tint; a stroke of width 0, `0 w`, on a path, a gradient-filled path, legacy type or in an art style comes in as a 0.25 pt hairline, as from PDF: #1671), linear and radial gradients, pattern fills with their patterns as pattern swatches (#1025), gradient and pattern names in the file up to their first newline (a name that another swatch, or a gradient or pattern defined earlier, already has is numbered "Sky 2"; a name without a newline is kept, and when another swatch has it, the pattern's swatch, or a named color sharing a gradient or pattern swatch's name, is numbered the same way), opacity, blend modes, isolation and knockout, embedded images where their matrix puts them, rotated ones too (#2269), with their alpha channel (CMYK images keep their ink amounts, as they do when a `.ai` opens from its PDF part, and an alpha channel that hides part of a CMYK image becomes a grayscale opacity mask), placed (linked) files as linked images in their place, each showing the low-resolution preview the file keeps of it until its file is found or relinked in the Links panel (#1264), with the folder the file keeps relative to the document's, where the link is looked for when its path is gone, guides, and every artboard where it is, with its center mark, cross hairs, video safe areas and video ruler pixel aspect ratio. VectorCraft reads `CropAreaActive`, an `/Int` in the dictionary that holds the artboard array, as the index of the active artboard in that array, and the file opens with that artboard active; without it, or when it names no artboard that opens, the first artboard is active. It also reads the Document Raster Effects Settings (resolution, color model, background, anti-alias, clipping mask, Add Around Object and Preserve Spot Colors), the author from the header's `%%For` (an EPS's own header when the editing data's has none), swatches for the header's `%%CMYKCustomColor` and `%%RGBCustomColor` colors that the document has none of, and `%%TemplateBox` in older files; a setting with a value of another type or out of range keeps its default. Objects on Path groups open live, with their path, their objects in order along it, Pivot and Rotate; one with a dragged spacing or other options opens as a plain group. A gradient with stops in the middle runs its whole ramp across its shape, and a gradient object does not pass its fill to the next path (#1390). An object whose art style is one fill and one stroke at most (solid colours, its own gradient, a variable-width profile) with Drop Shadow, Inner Glow, Outer Glow, Feather, Round Corners, Scribble, Offset Path, Outline Object, Outline Stroke, Convert to Shape, Tweak (only when it moves nothing) or Pucker & Bloat at 0 comes in as itself with them and their saved settings. A path, compound path or group (not a clipping group) whose only effect is Transform (not with copies or Random) or a Free Distort whose corners make a parallelogram comes in as itself with it too, when neither it nor anything in it paints with a gradient or pattern and everything in it is a path, compound path or group with no opacity mask and no effects of its own; Transform that scales, rotates or reflects needs nothing in it to be stroked. Twist as the only effect is read the same way on an unstroked path or compound path whose segments are all straight. One with more, other effects (Zig Zag, a Pucker & Bloat of another amount, a Free Distort with other corners), an effect setting that is not read (an unknown key, a missing or out-of-range value, a Scribble with a color of its own), dashes aligned to corners, a brush other than a Calligraphic one, or a Calligraphic brush with settings of its own or an angle that follows the path comes in as its drawn look (a group named after it). Objects in a symbol defined before the file's art styles section, as newer files write it, take the same styles as the layers' objects. A path with a Calligraphic brush otherwise comes in as the path, the brush on its stroke at the stroke's weight, which scales the brush (#372). A Calligraphic brush's Pressure, Tilt, Bearing and Rotation come in as those channels (a 6D Art Pen's brushes vary with the pressure, the bearing and the barrel's rotation); its Stylus Wheel varies at random. The file's Calligraphic, Scatter, Art and Bristle brushes replace the default ones in the Brushes panel, in the file's order, also when the file comes in as its PDF part (a brush library has no layers); pattern brushes and brushes it can't read are left out with a note. Type keeps its art style as a live appearance whatever its stack, so it can be retyped: each fill and stroke of the style's stack (solid colours, gradients and pattern fills, placed as the drawn look places them) with its own opacity, blend mode and effects, the effects on the whole object, and where the characters paint among them; the effects read are Warp, Offset Path, Outline Object, Outline Stroke, Transform (with copies, Transform Objects, Transform Patterns and Scale Strokes & Effects; not with Random), Free Distort, Pucker & Bloat, Twist, Zig Zag, Tweak (only when it moves nothing, the file holding none of its random outline), Drop Shadow, Inner Glow, Outer Glow, Feather, Round Corners, Scribble, Gaussian Blur, Bas Relief (its settings at their defaults) and Convert to Shape, and a style with others, or with an effect setting that isn't read, keeps the type's drawn look. Convert to Shape keeps its Rectangle, Rounded Rectangle or Ellipse, its Absolute or Relative size (a relative size in the file is added to each side) and its corner radius; a relative Ellipse, or a setting that isn't read, keeps the drawn look. The page's drawing of such a style isn't held to look like VectorCraft's where its drawn look lay. Gradients take their matrix (`Xm`, radials and skewed ones too), focal point and the order of stops sharing a ramp point; gradient meshes, a clipping path's own fill and its stroke, and the artboards' names are read too. `editingData: "always"` (`convert --editing-data`) opens a `.ai` or an Illustrator EPS from its editing data even where it draws differently from its page, which can be older, with a note. Type is made from the file's text document, whole and editable, shown or not: point type (its frame's matrix, which newer files leave out when it is neither turned nor scaled, read as none), area type (a story in several frames as threaded type) and type on a path, with its characters, fonts, size, leading, tracking, scaling, baseline shift, fill and stroke (grey, RGB or CMYK), alignment, indents and paragraph spacing (a character attribute a run doesn't set comes from its character style, then the style that one is based on, then the document's defaults); area type keeps its frame's Area Type Options rows and columns, the gutter between rows and the gutter between columns, and its first baseline (Fixed, Cap Height, Leading or x Height) with its minimum; the page's drawing of it (often in pieces) is left out. Vertical type keeps its orientation, its columns from right to left, and a run set to Tate-chu-yoko keeps that setting. When it makes the type of every text object that shows, the page's type is only compared with it, each text object keeps its own group, frame and layer, and a line break inside a paragraph stays one. Where it can't make a text object's type (a frame of another kind), that text object takes the page's type where the text document puts its lines, or else what is left of the page's type in painting order (no group around it); the page's type where made type draws stays that type's, and hidden type is left out with a note. Text wrap is read too: an object whose dictionary has the wrap options (offset and Invert Wrap), or any graphic of a legacy wraparound group (`*w` … `*W`, before or after its type, with no offset), is a wrap object, and area type below it in its layer flows around it when the file opens, threaded type included (#2763). Kerning, underline and the other character and paragraph options aren't read yet. A `.ai` saved without PDF compatibility (a placeholder page) opens from its editing data alone, its point type, area type and type on a path made from the text document. A `.ai` whose PDF part shows only text isn't taken for that placeholder when its page states an art, trim or bleed box: it opens from its editing data alone where that reads, else from its PDF part (#1387). A `.ai` whose PDF part draws nothing at all (an empty page, with or without those boxes) opens from its editing data alone where that reads too: there is no page art to check its layers against, and the empty page would lose all of it. Text objects with an appearance keep their own text and frame, type of hidden layers stays hidden, and type on later artboards lands on its text objects (#1391); area type whose frame is too short for a line of the fallback font shows its first line (the frame is made taller, with a warning in the open result) (#1392). In a PDF saved with some of its artboards, the type on each page after the first goes to an artboard of that page's size after the previous page's artboard, and only to one that leaves an artboard for each later page; the first page's artboard also leaves one for each later page. When several artboards fit a later page, VectorCraft takes the one whose art draws most like the page, and compares at most 16 artboards for all the later pages together. Symbols are read into the Symbols panel, in the file's symbol list order, with their art, their registration point and the instances in their art, and their instances come in live with their matrix, name, hide, lock, opacity, blending mode, isolation, knockout and opacity mask; a symbol whose art isn't read whole (type, placed files, an image it leaves out or anything else it doesn't read) isn't kept. Symbols are read only with the layers: a file that comes in as its page or PDF part (editing data with no layers, layers that can't be read, or any of the cases below) opens with an empty Symbols panel. Instances of symbols it can't read, instances with appearance changes of their own (a dynamic symbol's), pattern fills whose pattern it can't read, placed files the data keeps no preview of and anything else it doesn't read make the file come in as its page (on a layer that doesn't show, they are left out of that layer), with a warning saying what. An unread object on a shown layer whose box can be found instead comes in as a group of the page's objects inside that box, named after it, with the rest of the layers and groups kept and a warning listing what came in as the page's art; the file still comes in as its page when live art or another unread object shares that page art, when the object spans two artboards or lies on an artboard that has no page, when no page art lies inside its box, when that page art is inside a page group with a clip, mask, transparency or appearance, when the object holds a frame of threaded type, when the page art uses a pattern, image or swatch that the page lacks or that differs from the editing data's, or when the page art doesn't carry its transparency (#4806). The layers' art is also compared with the page (by lightness, so colours written as their CMYK equivalents compare alike, and by whether a pixel is inked at all); the page is used when they differ by more than 5% (away from type, when all the type is made from the text document), where one draws an object the other doesn't (away from type, whose lines may be laid out afresh), and when an EPS whose page is its art's box has art printed outside it (#735). A `.ai` is not compared with its page, and its PDF part is not imported, when its text document makes the type of every text object (at least one shows, and none is drawn by the appearance of the layer or group it is in), no object is unread, no placed file has a second placement, no live envelope keeps its drawn art, it declares no large canvas, and its artboards are its pages' trim boxes one for one, in points or in the first page's `UserUnit`: it opens from its layers, with the bleed of its pages' bleed boxes. When they differ because some objects draw differently (an object in another color, or one that only one of them draws), each top-level object of the layers that holds such a difference comes in as a group of the page's objects inside its box and the layers stay, with a warning that names the layer or sublayer of each such object as the Layers panel shows it (`<Layer>` for one without a name) and how many came in from it; an export or Save As to the file's own path then needs `acknowledgeLoss: true`, and a wrap object replaced this way keeps its wrap options. The file still comes in as its page when only edges or type differ, when a difference lies outside every top-level object, when more than half of the top-level objects or more than 64 hold one, when such an object is or holds type or holds a wrap object inside a group, when the page's type of a text object that stays lies inside such an object's box, when the page's art can't replace such an object for one of the reasons above for an unread object, when matching the differences to the objects would take too much work, or when the result still differs from the page. `editingData: "always"` keeps the objects as read, and placed files at the other point their data gives are tried as well. An EPS whose page is its art's box keeps that page when it comes in through its layers, not the editing data's artboard, and a text object counts as drawn by the page by its colours, not only its lightness, so a red stroke stacked over a dark red one stays (#1102). `textAs: "outlines"` opens a `.ai` whose type shows from its PDF part, which has the outlines; `editingData: false` opens any of them as its page or PDF part only, for print pipelines (#735). A file whose import left something out (hidden text, art or layers) is never written over by an export or Save As to its own path unless `acknowledgeLoss: true` (`convert --replace-lossy`), so the original keeps what the document lacks. Where a `.ai` can't be read that way (or its layers are turned off in the import options), we read its PDF-compatible part, so Illustrator-only live objects arrive as appearance, and plain groups arrive ungrouped: that part draws each object on its own and marks only layers, clipping groups and groups with opacity, blending or a mask (those come back). Art outside the artboards isn't in that part at all (Illustrator's PDF part leaves it out), so it doesn't open; the import says so in a note (#472). Its pages still go where the editing data puts the artboards (a grid stays a grid), with the art on each, when it has as many artboards as pages, of the same sizes (#1068); the page of the artboard `CropAreaActive` names is then the active artboard. A `.ai` whose editing data has artboards but no layers also opens on that page under the same check, and its pages stay where they are. A `.ai` whose PDF part's pages are cropped to its art (each page the box of all the art, which is the editing data's bounding box) instead of its artboards opens from its layers, with its own artboards, where they draw as that page does. Its pages are laid out so that art one of them draws past its artboard (notes beside a design, which the part doesn't clip) doesn't lie over the page before it in the row, where it was taken for that page's art: the check against the editing data then found art its layers don't have there and opened the file as its PDF part, without the art outside the artboards. That part also has no paragraphs: area type is written line by line, and comes back as area type only where its font is installed and lays the lines out with the same breaks, else as a point type object per line (#508). Art off the page that a PDF does draw opens on the pasteboard.
 the app's own editing copy of a file (an EPS after its `%%EOF`, a `.ai`'s `AIPrivateData` streams, a PDF's `AIPDFPrivateData` streams when it was saved with the editing data (#868), Zstandard or zlib, the EPS's in ASCII85) is not documented as a whole. VectorCraft reads its structure: layers and sublayers (names, order, visibility, lock, printing, preview, dimming, colour), groups as they were nested, compound paths (painted by their last path, or the last painted one, with the paths of groups inside them kept as their paths: #1410), clipping groups and layer clipping (several clipping paths in a clipping group, a layer or an opacity mask's art clip to their intersection, and a compound path of clipping paths stays one clip; clipping paths that would nest the art past the document's 32 levels stop the editing data from being read: #5789), object names, hidden and locked objects, fills and strokes (grey, CMYK, RGB, named and spot colours, spot colours defined in Lab with their Lab values (#1032), global process colours as global swatches at their tint; a stroke of width 0, `0 w`, on a path, a gradient-filled path, legacy type or in an art style comes in as a 0.25 pt hairline, as from PDF: #1671), linear and radial gradients, pattern fills with their patterns as pattern swatches (#1025), gradient and pattern names in the file up to their first newline (a name that another swatch, or a gradient or pattern defined earlier, already has is numbered "Sky 2"; a name without a newline is kept, and when another swatch has it, the pattern's swatch, or a named color sharing a gradient or pattern swatch's name, is numbered the same way), opacity, blend modes, isolation and knockout, embedded images where their matrix puts them, rotated ones too (#2269), with their alpha channel (CMYK images keep their ink amounts, as they do when a `.ai` opens from its PDF part, and an alpha channel that hides part of a CMYK image becomes a grayscale opacity mask), placed (linked) files as linked images in their place, each showing the low-resolution preview the file keeps of it until its file is found or relinked in the Links panel (#1264), with the folder the file keeps relative to the document's, where the link is looked for when its path is gone, guides, and every artboard where it is, with its center mark, cross hairs, video safe areas and video ruler pixel aspect ratio. VectorCraft reads `CropAreaActive`, an `/Int` in the dictionary that holds the artboard array, as the index of the active artboard in that array, and the file opens with that artboard active; without it, or when it names no artboard that opens, the first artboard is active. It also reads the Document Raster Effects Settings (resolution, color model, background, anti-alias, clipping mask, Add Around Object and Preserve Spot Colors), the author from the header's `%%For` (an EPS's own header when the editing data's has none), swatches for the header's `%%CMYKCustomColor` and `%%RGBCustomColor` colors that the document has none of, and `%%TemplateBox` in older files; a setting with a value of another type or out of range keeps its default. Objects on Path groups open live, with their path, their objects in order along it, Pivot and Rotate; one with a dragged spacing or other options opens as a plain group. A gradient with stops in the middle runs its whole ramp across its shape, and a gradient object does not pass its fill to the next path (#1390). An object whose art style is one fill and one stroke at most (solid colours, its own gradient, a variable-width profile) with Drop Shadow, Inner Glow, Outer Glow, Feather, Round Corners, Scribble, Offset Path, Outline Object, Outline Stroke, Convert to Shape, Tweak (only when it moves nothing) or Pucker & Bloat at 0 comes in as itself with them and their saved settings. A path, compound path or group (not a clipping group) whose only effect is Transform (not with copies or Random) or a Free Distort whose corners make a parallelogram comes in as itself with it too, when neither it nor anything in it paints with a gradient or pattern and everything in it is a path, compound path or group with no opacity mask and no effects of its own; Transform that scales, rotates or reflects needs nothing in it to be stroked. Twist as the only effect is read the same way on an unstroked path or compound path whose segments are all straight. One with more, other effects (Zig Zag, a Pucker & Bloat of another amount, a Free Distort with other corners), an effect setting that is not read (an unknown key, a missing or out-of-range value, a Scribble with a color of its own), dashes aligned to corners, a brush other than a Calligraphic or Art one, a Calligraphic brush with settings of its own or an angle that follows the path, or an Art brush other than the ones described next comes in as its drawn look (a group named after it). A path with a Calligraphic brush otherwise comes in as the path, the brush on its stroke at the stroke's weight, which scales the brush (#372), and so does a path with an Art brush, whose weight scales the art across the path, when all of these hold: the brush stretches its art along the path, unflipped, at 100% in Tints; the path's settings are the brush's own, with no entry that isn't read, no variable width and no effects; its stroke isn't a swatch; and the art is paths, compound paths and groups in solid fills, with no strokes, masks or effects, and has some length along the path. A stroke takes the brush the Brushes panel keeps under its name, and one whose name the panel doesn't keep comes in as its drawn look. Type with an Art brush keeps its drawn look under the type. A Calligraphic brush's Pressure, Tilt, Bearing and Rotation come in as those channels (a 6D Art Pen's brushes vary with the pressure, the bearing and the barrel's rotation); its Stylus Wheel varies at random. The file's Calligraphic, Scatter, Art and Bristle brushes replace the default ones in the Brushes panel, in the file's order, also when the file comes in as its PDF part (a brush library has no layers); pattern brushes and brushes it can't read are left out with a note. Type keeps its art style as a live appearance whatever its stack (an Art brush aside), so it can be retyped: each fill and stroke of the style's stack (solid colours, gradients and pattern fills, placed as the drawn look places them) with its own opacity, blend mode and effects, the effects on the whole object, and where the characters paint among them; the effects read are Warp, Offset Path, Outline Object, Outline Stroke, Transform (with copies, Transform Objects, Transform Patterns and Scale Strokes & Effects; not with Random), Free Distort, Pucker & Bloat, Twist, Zig Zag, Tweak (only when it moves nothing, the file holding none of its random outline), Drop Shadow, Inner Glow, Outer Glow, Feather, Round Corners, Scribble, Gaussian Blur, Bas Relief (its settings at their defaults) and Convert to Shape, and a style with others, or with an effect setting that isn't read, keeps the type's drawn look. Convert to Shape keeps its Rectangle, Rounded Rectangle or Ellipse, its Absolute or Relative size (a relative size in the file is added to each side) and its corner radius; a relative Ellipse, or a setting that isn't read, keeps the drawn look. The page's drawing of such a style isn't held to look like VectorCraft's where its drawn look lay. Gradients take their matrix (`Xm`, radials and skewed ones too), focal point and the order of stops sharing a ramp point; gradient meshes, a clipping path's own fill and its stroke, and the artboards' names are read too. `editingData: "always"` (`convert --editing-data`) opens a `.ai` or an Illustrator EPS from its editing data even where it draws differently from its page, which can be older, with a note. Type is made from the file's text document, whole and editable, shown or not: point type (its frame's matrix, which newer files leave out when it is neither turned nor scaled, read as none), area type (a story in several frames as threaded type) and type on a path, with its characters, fonts, size, leading, tracking, scaling, baseline shift, fill and stroke (grey, RGB or CMYK), alignment, indents and paragraph spacing (a character attribute a run doesn't set comes from its character style, then the style that one is based on, then the document's defaults); area type keeps its frame's Area Type Options rows and columns, the gutter between rows and the gutter between columns, and its first baseline (Fixed, Cap Height, Leading or x Height) with its minimum; the page's drawing of it (often in pieces) is left out. Vertical type keeps its orientation, its columns from right to left, and a run set to Tate-chu-yoko keeps that setting. When it makes the type of every text object that shows, the page's type is only compared with it, each text object keeps its own group, frame and layer, and a line break inside a paragraph stays one. Where it can't make a text object's type (a frame of another kind), that text object takes the page's type where the text document puts its lines, or else what is left of the page's type in painting order (no group around it); the page's type where made type draws stays that type's, and hidden type is left out with a note. Text wrap is read too: an object whose dictionary has the wrap options (offset and Invert Wrap), or any graphic of a legacy wraparound group (`*w` … `*W`, before or after its type, with no offset), is a wrap object, and area type below it in its layer flows around it when the file opens, threaded type included (#2763). Kerning, underline and the other character and paragraph options aren't read yet. A `.ai` saved without PDF compatibility (a placeholder page) opens from its editing data alone, its point type, area type and type on a path made from the text document. A `.ai` whose PDF part shows only text isn't taken for that placeholder when its page states an art, trim or bleed box: it opens from its editing data alone where that reads, else from its PDF part (#1387). A `.ai` whose PDF part draws nothing at all (an empty page, with or without those boxes) opens from its editing data alone where that reads too: there is no page art to check its layers against, and the empty page would lose all of it. Text objects with an appearance keep their own text and frame, type of hidden layers stays hidden, and type on later artboards lands on its text objects (#1391); area type whose frame is too short for a line of the fallback font shows its first line (the frame is made taller, with a warning in the open result) (#1392). In a PDF saved with some of its artboards, the type on each page after the first goes to an artboard of that page's size after the previous page's artboard, and only to one that leaves an artboard for each later page; the first page's artboard also leaves one for each later page. When several artboards fit a later page, VectorCraft takes the one whose art draws most like the page, and compares at most 16 artboards for all the later pages together. Symbols are read into the Symbols panel, in the file's symbol list order, with their art, their registration point and the instances in their art, and their instances come in live with their matrix, name, hide, lock, opacity, blending mode, isolation, knockout and opacity mask; a symbol whose art isn't read whole (type, placed files, an image it leaves out or anything else it doesn't read) isn't kept. Symbols are read only with the layers: a file that comes in as its page or PDF part (editing data with no layers, layers that can't be read, or any of the cases below) opens with an empty Symbols panel. Instances of symbols it can't read, instances with appearance changes of their own (a dynamic symbol's), pattern fills whose pattern it can't read, placed files the data keeps no preview of and anything else it doesn't read make the file come in as its page (on a layer that doesn't show, they are left out of that layer), with a warning saying what. An unread object on a shown layer whose box can be found instead comes in as a group of the page's objects inside that box, named after it, with the rest of the layers and groups kept and a warning listing what came in as the page's art; the file still comes in as its page when live art or another unread object shares that page art, when the object spans two artboards or lies on an artboard that has no page, when no page art lies inside its box, when that page art is inside a page group with a clip, mask, transparency or appearance, when the object holds a frame of threaded type, when the page art uses a pattern, image or swatch that the page lacks or that differs from the editing data's, or when the page art doesn't carry its transparency (#4806). The layers' art is also compared with the page (by lightness, so colours written as their CMYK equivalents compare alike, and by whether a pixel is inked at all); the page is used when they differ by more than 5% (away from type, when all the type is made from the text document), where one draws an object the other doesn't (away from type, whose lines may be laid out afresh), and when an EPS whose page is its art's box has art printed outside it (#735). A `.ai` is not compared with its page, and its PDF part is not imported, when its text document makes the type of every text object (at least one shows, and none is drawn by the appearance of the layer or group it is in), no object is unread, no placed file has a second placement, no live envelope keeps its drawn art, it declares no large canvas, and its artboards are its pages' trim boxes one for one, in points or in the first page's `UserUnit`: it opens from its layers, with the bleed of its pages' bleed boxes. When they differ because some objects draw differently (an object in another color, or one that only one of them draws), each top-level object of the layers that holds such a difference comes in as a group of the page's objects inside its box and the layers stay, with a warning that names the layer or sublayer of each such object as the Layers panel shows it (`<Layer>` for one without a name) and how many came in from it; an export or Save As to the file's own path then needs `acknowledgeLoss: true`, and a wrap object replaced this way keeps its wrap options. The file still comes in as its page when only edges or type differ, when a difference lies outside every top-level object, when more than half of the top-level objects or more than 64 hold one, when such an object is or holds type or holds a wrap object inside a group, when the page's type of a text object that stays lies inside such an object's box, when the page's art can't replace such an object for one of the reasons above for an unread object, when matching the differences to the objects would take too much work, or when the result still differs from the page. `editingData: "always"` keeps the objects as read, and placed files at the other point their data gives are tried as well. An EPS whose page is its art's box keeps that page when it comes in through its layers, not the editing data's artboard, and a text object counts as drawn by the page by its colours, not only its lightness, so a red stroke stacked over a dark red one stays (#1102). `textAs: "outlines"` opens a `.ai` whose type shows from its PDF part, which has the outlines; `editingData: false` opens any of them as its page or PDF part only, for print pipelines (#735). A file whose import left something out (hidden text, art or layers) is never written over by an export or Save As to its own path unless `acknowledgeLoss: true` (`convert --replace-lossy`), so the original keeps what the document lacks. Where a `.ai` can't be read that way (or its layers are turned off in the import options), we read its PDF-compatible part, so Illustrator-only live objects arrive as appearance, and plain groups arrive ungrouped: that part draws each object on its own and marks only layers, clipping groups and groups with opacity, blending or a mask (those come back). Art outside the artboards isn't in that part at all (Illustrator's PDF part leaves it out), so it doesn't open; the import says so in a note (#472). Its pages still go where the editing data puts the artboards (a grid stays a grid), with the art on each, when it has as many artboards as pages, of the same sizes (#1068); the page of the artboard `CropAreaActive` names is then the active artboard. A `.ai` whose editing data has artboards but no layers also opens on that page under the same check, and its pages stay where they are. A `.ai` whose PDF part's pages are cropped to its art (each page the box of all the art, which is the editing data's bounding box) instead of its artboards opens from its layers, with its own artboards, where they draw as that page does. Its pages are laid out so that art one of them draws past its artboard (notes beside a design, which the part doesn't clip) doesn't lie over the page before it in the row, where it was taken for that page's art: the check against the editing data then found art its layers don't have there and opened the file as its PDF part, without the art outside the artboards. That part also has no paragraphs: area type is written line by line, and comes back as area type only where its font is installed and lays the lines out with the same breaks, else as a point type object per line (#508). Art off the page that a PDF does draw opens on the pasteboard.
 the app's own editing copy of a file (an EPS after its `%%EOF`, a `.ai`'s `AIPrivateData` streams, a PDF's `AIPDFPrivateData` streams when it was saved with the editing data (#868), Zstandard or zlib, the EPS's in ASCII85) is not documented as a whole. VectorCraft reads its structure: layers and sublayers (names, order, visibility, lock, printing, preview, dimming, colour), groups as they were nested, compound paths (painted by their last path, or the last painted one, with the paths of groups inside them kept as their paths: #1410), clipping groups and layer clipping (several clipping paths in a clipping group, a layer or an opacity mask's art clip to their intersection, and a compound path of clipping paths stays one clip; a filled clipping path keeps its fill, which paints under the art it clips, except the path of a mask that covers several layers, whose fill is read as a path of its own in the layer that holds the mask's path, and a compound clipping path whose subpaths paint differently, whose filled subpaths are read as a compound path of their own under the art it clips; clipping paths that would nest the art past the document's 32 levels stop the editing data from being read: #5789), object names, hidden and locked objects, fills and strokes (grey, CMYK, RGB, named and spot colours, spot colours defined in Lab with their Lab values (#1032), global process colours as global swatches at their tint; a stroke of width 0, `0 w`, on a path, a gradient-filled path, legacy type or in an art style comes in as a 0.25 pt hairline, as from PDF: #1671), linear and radial gradients, pattern fills with their patterns as pattern swatches (#1025), gradient and pattern names in the file up to their first newline (a name that another swatch, or a gradient or pattern defined earlier, already has is numbered "Sky 2"; a name without a newline is kept, and when another swatch has it, the pattern's swatch, or a named color sharing a gradient or pattern swatch's name, is numbered the same way), opacity, blend modes, isolation and knockout, embedded images where their matrix puts them, rotated ones too (#2269), with their alpha channel (CMYK images keep their ink amounts, as they do when a `.ai` opens from its PDF part, and an alpha channel that hides part of a CMYK image becomes a grayscale opacity mask), placed (linked) files as linked images in their place, each showing the low-resolution preview the file keeps of it until its file is found or relinked in the Links panel (#1264), with the folder the file keeps relative to the document's, where the link is looked for when its path is gone, guides, and every artboard where it is, with its center mark, cross hairs, video safe areas and video ruler pixel aspect ratio. VectorCraft reads `CropAreaActive`, an `/Int` in the dictionary that holds the artboard array, as the index of the active artboard in that array, and the file opens with that artboard active; without it, or when it names no artboard that opens, the first artboard is active. It also reads the Document Raster Effects Settings (resolution, color model, background, anti-alias, clipping mask, Add Around Object and Preserve Spot Colors), the author from the header's `%%For` (an EPS's own header when the editing data's has none), swatches for the header's `%%CMYKCustomColor` and `%%RGBCustomColor` colors that the document has none of, and `%%TemplateBox` in older files; a setting with a value of another type or out of range keeps its default. Objects on Path groups open live, with their path, their objects in order along it, Pivot and Rotate; one with a dragged spacing or other options opens as a plain group. A gradient with stops in the middle runs its whole ramp across its shape, and a gradient object does not pass its fill to the next path (#1390). An object whose art style is one fill and one stroke at most (solid colours, its own gradient, a variable-width profile) with Drop Shadow, Inner Glow, Outer Glow, Feather, Round Corners, Scribble, Offset Path, Outline Object, Outline Stroke, Convert to Shape, Tweak (only when it moves nothing) or Pucker & Bloat at 0 comes in as itself with them and their saved settings. A path, compound path or group (not a clipping group) whose only effect is Transform (not with copies or Random) or a Free Distort whose corners make a parallelogram comes in as itself with it too, when neither it nor anything in it paints with a gradient or pattern and everything in it is a path, compound path or group with no opacity mask and no effects of its own; Transform that scales, rotates or reflects needs nothing in it to be stroked. Twist as the only effect is read the same way on an unstroked path or compound path whose segments are all straight. One with more, other effects (Zig Zag, a Pucker & Bloat of another amount, a Free Distort with other corners), an effect setting that is not read (an unknown key, a missing or out-of-range value, a Scribble with a color of its own), dashes aligned to corners, a brush other than a Calligraphic one, or a Calligraphic brush with settings of its own or an angle that follows the path comes in as its drawn look (a group named after it). Objects in a symbol defined before the file's art styles section, as newer files write it, take the same styles as the layers' objects. A path with a Calligraphic brush otherwise comes in as the path, the brush on its stroke at the stroke's weight, which scales the brush (#372). A Calligraphic brush's Pressure, Tilt, Bearing and Rotation come in as those channels (a 6D Art Pen's brushes vary with the pressure, the bearing and the barrel's rotation); its Stylus Wheel varies at random. The file's Calligraphic, Scatter, Art and Bristle brushes replace the default ones in the Brushes panel, in the file's order, also when the file comes in as its PDF part (a brush library has no layers); pattern brushes and brushes it can't read are left out with a note. Type keeps its art style as a live appearance whatever its stack, so it can be retyped: each fill and stroke of the style's stack (solid colours, gradients and pattern fills, placed as the drawn look places them) with its own opacity, blend mode and effects, the effects on the whole object, and where the characters paint among them; the effects read are Warp, Offset Path, Outline Object, Outline Stroke, Transform (with copies, Transform Objects, Transform Patterns and Scale Strokes & Effects; not with Random), Free Distort, Pucker & Bloat, Twist, Zig Zag, Tweak (only when it moves nothing, the file holding none of its random outline), Drop Shadow, Inner Glow, Outer Glow, Feather, Round Corners, Scribble, Gaussian Blur, Bas Relief (its settings at their defaults) and Convert to Shape, and a style with others, or with an effect setting that isn't read, keeps the type's drawn look. Convert to Shape keeps its Rectangle, Rounded Rectangle or Ellipse, its Absolute or Relative size (a relative size in the file is added to each side) and its corner radius; a relative Ellipse, or a setting that isn't read, keeps the drawn look. The page's drawing of such a style isn't held to look like VectorCraft's where its drawn look lay. Gradients take their matrix (`Xm`, radials and skewed ones too), focal point and the order of stops sharing a ramp point; gradient meshes, a clipping path's own fill and its stroke, and the artboards' names are read too. `editingData: "always"` (`convert --editing-data`) opens a `.ai` or an Illustrator EPS from its editing data even where it draws differently from its page, which can be older, with a note. Type is made from the file's text document, whole and editable, shown or not: point type (its frame's matrix, which newer files leave out when it is neither turned nor scaled, read as none), area type (a story in several frames as threaded type) and type on a path, with its characters, fonts, size, leading, tracking, scaling, baseline shift, fill and stroke (grey, RGB or CMYK), alignment, indents and paragraph spacing (a character attribute a run doesn't set comes from its character style, then the style that one is based on, then the document's defaults); area type keeps its frame's Area Type Options rows and columns, the gutter between rows and the gutter between columns, and its first baseline (Fixed, Cap Height, Leading or x Height) with its minimum; the page's drawing of it (often in pieces) is left out. Vertical type keeps its orientation, its columns from right to left, and a run set to Tate-chu-yoko keeps that setting. When it makes the type of every text object that shows, the page's type is only compared with it, each text object keeps its own group, frame and layer, and a line break inside a paragraph stays one. Where it can't make a text object's type (a frame of another kind), that text object takes the page's type where the text document puts its lines, or else what is left of the page's type in painting order (no group around it); the page's type where made type draws stays that type's, and hidden type is left out with a note. Text wrap is read too: an object whose dictionary has the wrap options (offset and Invert Wrap), or any graphic of a legacy wraparound group (`*w` … `*W`, before or after its type, with no offset), is a wrap object, and area type below it in its layer flows around it when the file opens, threaded type included (#2763). Kerning, underline and the other character and paragraph options aren't read yet. A `.ai` saved without PDF compatibility (a placeholder page) opens from its editing data alone, its point type, area type and type on a path made from the text document. A `.ai` whose PDF part shows only text isn't taken for that placeholder when its page states an art, trim or bleed box: it opens from its editing data alone where that reads, else from its PDF part (#1387). A `.ai` whose PDF part draws nothing at all (an empty page, with or without those boxes) opens from its editing data alone where that reads too: there is no page art to check its layers against, and the empty page would lose all of it. Text objects with an appearance keep their own text and frame, type of hidden layers stays hidden, and type on later artboards lands on its text objects (#1391); area type whose frame is too short for a line of the fallback font shows its first line (the frame is made taller, with a warning in the open result) (#1392). Symbols are read into the Symbols panel, in the file's symbol list order, with their art, their registration point and the instances in their art, and their instances come in live with their matrix, name, hide, lock, opacity, blending mode, isolation, knockout and opacity mask; a symbol whose art isn't read whole (type, placed files, an image it leaves out or anything else it doesn't read) isn't kept. Symbols are read only with the layers: a file that comes in as its page or PDF part (editing data with no layers, layers that can't be read, or any of the cases below) opens with an empty Symbols panel. Instances of symbols it can't read, instances with appearance changes of their own (a dynamic symbol's), pattern fills whose pattern it can't read, placed files the data keeps no preview of and anything else it doesn't read make the file come in as its page (on a layer that doesn't show, they are left out of that layer), with a warning saying what. An unread object on a shown layer whose box can be found instead comes in as a group of the page's objects inside that box, named after it, with the rest of the layers and groups kept and a warning listing what came in as the page's art; the file still comes in as its page when live art or another unread object shares that page art, when the object spans two artboards or lies on an artboard that has no page, when no page art lies inside its box, when that page art is inside a page group with a clip, mask, transparency or appearance, when the object holds a frame of threaded type, when the page art uses a pattern, image or swatch that the page lacks or that differs from the editing data's, or when the page art doesn't carry its transparency (#4806). The layers' art is also compared with the page (by lightness, so colours written as their CMYK equivalents compare alike, and by whether a pixel is inked at all); the page is used when they differ by more than 5% (away from type, when all the type is made from the text document), where one draws an object the other doesn't (away from type, whose lines may be laid out afresh), and when an EPS whose page is its art's box has art printed outside it (#735). A `.ai` is not compared with its page, and its PDF part is not imported, when its text document makes the type of every text object (at least one shows, and none is drawn by the appearance of the layer or group it is in), no object is unread, no placed file has a second placement, no live envelope keeps its drawn art, it declares no large canvas, and its artboards are its pages' trim boxes one for one, in points or in the first page's `UserUnit`: it opens from its layers, with the bleed of its pages' bleed boxes. When they differ because some objects draw differently (an object in another color, or one that only one of them draws), each top-level object of the layers that holds such a difference comes in as a group of the page's objects inside its box and the layers stay, with a warning that names the layer or sublayer of each such object as the Layers panel shows it (`<Layer>` for one without a name) and how many came in from it; an export or Save As to the file's own path then needs `acknowledgeLoss: true`, and a wrap object replaced this way keeps its wrap options. The file still comes in as its page when only edges or type differ, when a difference lies outside every top-level object, when more than half of the top-level objects or more than 64 hold one, when such an object is or holds type or holds a wrap object inside a group, when the page's type of a text object that stays lies inside such an object's box, when the page's art can't replace such an object for one of the reasons above for an unread object, when matching the differences to the objects would take too much work, or when the result still differs from the page. `editingData: "always"` keeps the objects as read, and placed files at the other point their data gives are tried as well. An EPS whose page is its art's box keeps that page when it comes in through its layers, not the editing data's artboard, and a text object counts as drawn by the page by its colours, not only its lightness, so a red stroke stacked over a dark red one stays (#1102). `textAs: "outlines"` opens a `.ai` whose type shows from its PDF part, which has the outlines; `editingData: false` opens any of them as its page or PDF part only, for print pipelines (#735). A file whose import left something out (hidden text, art or layers) is never written over by an export or Save As to its own path unless `acknowledgeLoss: true` (`convert --replace-lossy`), so the original keeps what the document lacks. Where a `.ai` can't be read that way (or its layers are turned off in the import options), we read its PDF-compatible part, so Illustrator-only live objects arrive as appearance, and plain groups arrive ungrouped: that part draws each object on its own and marks only layers, clipping groups and groups with opacity, blending or a mask (those come back). Art outside the artboards isn't in that part at all (Illustrator's PDF part leaves it out), so it doesn't open; the import says so in a note (#472). Its pages still go where the editing data puts the artboards (a grid stays a grid), with the art on each, when it has as many artboards as pages, of the same sizes (#1068); the page of the artboard `CropAreaActive` names is then the active artboard. A `.ai` whose editing data has artboards but no layers also opens on that page under the same check, and its pages stay where they are. A `.ai` whose PDF part's pages are cropped to its art (each page the box of all the art, which is the editing data's bounding box) instead of its artboards opens from its layers, with its own artboards, where they draw as that page does. Its pages are laid out so that art one of them draws past its artboard (notes beside a design, which the part doesn't clip) doesn't lie over the page before it in the row, where it was taken for that page's art: the check against the editing data then found art its layers don't have there and opened the file as its PDF part, without the art outside the artboards. That part also has no paragraphs: area type is written line by line, and comes back as area type only where its font is installed and lays the lines out with the same breaks, else as a point type object per line (#508). Art off the page that a PDF does draw opens on the pasteboard.
@@ -231,9 +231,9 @@ the app's own editing copy of a file (an EPS after its `%%EOF`, a `.ai`'s `AIPri
 the app's own editing copy of a file (an EPS after its `%%EOF`, a `.ai`'s `AIPrivateData` streams, a PDF's `AIPDFPrivateData` streams when it was saved with the editing data (#868), Zstandard or zlib, the EPS's in ASCII85) is not documented as a whole. VectorCraft reads its structure: layers and sublayers (names, order, visibility, lock, printing, preview, dimming, colour), groups as they were nested, compound paths (painted by their last path, or the last painted one, with the paths of groups inside them kept as their paths: #1410), clipping groups and layer clipping (several clipping paths in a clipping group, a layer or an opacity mask's art clip to their intersection, and a compound path of clipping paths stays one clip; clipping paths that would nest the art past the document's 32 levels stop the editing data from being read: #5789), object names, hidden and locked objects, fills and strokes (grey, CMYK, RGB, named and spot colours, spot colours defined in Lab with their Lab values (#1032), global process colours as global swatches at their tint; a stroke of width 0, `0 w`, on a path, a gradient-filled path, legacy type or in an art style comes in as a 0.25 pt hairline, as from PDF: #1671), linear and radial gradients, pattern fills with their patterns as pattern swatches (#1025), gradient and pattern names in the file up to their first newline (a name that another swatch, or a gradient or pattern defined earlier, already has is numbered "Sky 2"; a name without a newline is kept, and when another swatch has it, the pattern's swatch, or a named color sharing a gradient or pattern swatch's name, is numbered the same way), opacity, blend modes, isolation and knockout, embedded images where their matrix puts them, rotated ones too (#2269), with their alpha channel (CMYK images keep their ink amounts, as they do when a `.ai` opens from its PDF part, and an alpha channel that hides part of a CMYK image becomes a grayscale opacity mask), placed (linked) files as linked images in their place, each showing the low-resolution preview the file keeps of it until its file is found or relinked in the Links panel (#1264), with the folder the file keeps relative to the document's, where the link is looked for when its path is gone, guides, and every artboard where it is, with its center mark, cross hairs, video safe areas and video ruler pixel aspect ratio. VectorCraft reads `CropAreaActive`, an `/Int` in the dictionary that holds the artboard array, as the index of the active artboard in that array, and the file opens with that artboard active; without it, or when it names no artboard that opens, the first artboard is active. It also reads the Document Raster Effects Settings (resolution, color model, background, anti-alias, clipping mask, Add Around Object and Preserve Spot Colors), the author from the header's `%%For` (an EPS's own header when the editing data's has none), swatches for the header's `%%CMYKCustomColor` and `%%RGBCustomColor` colors that the document has none of, and `%%TemplateBox` in older files; a setting with a value of another type or out of range keeps its default. Objects on Path groups open live, with their path, their objects in order along it, Pivot and Rotate; one with a dragged spacing or other options opens as a plain group. A gradient with stops in the middle runs its whole ramp across its shape, and a gradient object does not pass its fill to the next path (#1390). An object whose art style is one fill and one stroke at most (solid colours, its own gradient, a variable-width profile) with Drop Shadow, Inner Glow, Outer Glow, Feather, Round Corners, Scribble, Offset Path, Outline Object, Outline Stroke, Convert to Shape, Tweak (only when it moves nothing) or Pucker & Bloat at 0 comes in as itself with them and their saved settings. A path, compound path or group (not a clipping group) whose only effect is Transform (not with copies or Random) or a Free Distort whose corners make a parallelogram comes in as itself with it too, when neither it nor anything in it paints with a gradient or pattern and everything in it is a path, compound path or group with no opacity mask and no effects of its own; Transform that scales, rotates or reflects needs nothing in it to be stroked. Twist as the only effect is read the same way on an unstroked path or compound path whose segments are all straight. One with more, other effects (Zig Zag, a Pucker & Bloat of another amount, a Free Distort with other corners), an effect setting that is not read (an unknown key, a missing or out-of-range value, a Scribble with a color of its own), dashes aligned to corners, a brush other than a Calligraphic or Art one, a Calligraphic brush with settings of its own or an angle that follows the path, or an Art brush other than the ones described next comes in as its drawn look (a group named after it). Objects in a symbol defined before the file's art styles section, as newer files write it, take the same styles as the layers' objects. A path with a Calligraphic brush otherwise comes in as the path, the brush on its stroke at the stroke's weight, which scales the brush (#372), and so does a path with an Art brush, whose weight scales the art across the path, when all of these hold: the brush stretches its art along the path, unflipped, at 100% in Tints; the path's settings are the brush's own, with no entry that isn't read, no variable width and no effects; its stroke isn't a swatch; and the art is paths, compound paths and groups in solid fills, with no strokes, masks or effects, and has some length along the path. A stroke takes the brush the Brushes panel keeps under its name, and one whose name the panel doesn't keep comes in as its drawn look. Type with an Art brush keeps its drawn look under the type. A Calligraphic brush's Pressure, Tilt, Bearing and Rotation come in as those channels (a 6D Art Pen's brushes vary with the pressure, the bearing and the barrel's rotation); its Stylus Wheel varies at random. The file's Calligraphic, Scatter, Art and Bristle brushes replace the default ones in the Brushes panel, in the file's order, also when the file comes in as its PDF part (a brush library has no layers); pattern brushes and brushes it can't read are left out with a note. When the file opens from its layers, the spot colors in the art of each brush that comes in become swatches, and that art's colors count toward the document's color mode, as a pattern's do. The swatches take at most 20,000 color names in all across the brush art, and each brush-art section keeps at most 20,000 names. Each name keeps its first definition, with the color operators' names before the gradient stops' names. A spot color past those limits makes no swatch, and its color still counts toward the color mode. A spot color that the page's art, a pattern or a symbol also defines keeps the value defined there. Type keeps its art style as a live appearance whatever its stack (an Art brush aside), so it can be retyped: each fill and stroke of the style's stack (solid colours, gradients and pattern fills, placed as the drawn look places them) with its own opacity, blend mode and effects, the effects on the whole object, and where the characters paint among them; the effects read are Warp, Offset Path, Outline Object, Outline Stroke, Transform (with copies, Transform Objects, Transform Patterns and Scale Strokes & Effects; not with Random), Free Distort, Pucker & Bloat, Twist, Zig Zag, Tweak (only when it moves nothing, the file holding none of its random outline), Drop Shadow, Inner Glow, Outer Glow, Feather, Round Corners, Scribble, Gaussian Blur, Bas Relief (its settings at their defaults) and Convert to Shape, and a style with others, or with an effect setting that isn't read, keeps the type's drawn look. Convert to Shape keeps its Rectangle, Rounded Rectangle or Ellipse, its Absolute or Relative size (a relative size in the file is added to each side) and its corner radius; a relative Ellipse, or a setting that isn't read, keeps the drawn look. The page's drawing of such a style isn't held to look like VectorCraft's where its drawn look lay. Gradients take their matrix (`Xm`, radials and skewed ones too), focal point and the order of stops sharing a ramp point; gradient meshes, a clipping path's own fill and its stroke, and the artboards' names are read too. `editingData: "always"` (`convert --editing-data`) opens a `.ai` or an Illustrator EPS from its editing data even where it draws differently from its page, which can be older, with a note. Type is made from the file's text document, whole and editable, shown or not: point type (its frame's matrix, which newer files leave out when it is neither turned nor scaled, read as none), area type (a story in several frames as threaded type) and type on a path, with its characters, fonts, size, leading, tracking, scaling, baseline shift, fill and stroke (grey, RGB or CMYK), alignment, indents and paragraph spacing (a character attribute a run doesn't set comes from its character style, then the style that one is based on, then the document's defaults); area type keeps its frame's Area Type Options rows and columns, the gutter between rows and the gutter between columns, and its first baseline (Fixed, Cap Height, Leading or x Height) with its minimum; the page's drawing of it (often in pieces) is left out. Vertical type keeps its orientation, its columns from right to left, and a run set to Tate-chu-yoko keeps that setting. When it makes the type of every text object that shows, the page's type is only compared with it, each text object keeps its own group, frame and layer, and a line break inside a paragraph stays one. Where it can't make a text object's type (a frame of another kind), that text object takes the page's type where the text document puts its lines, or else what is left of the page's type in painting order (no group around it); the page's type where made type draws stays that type's, and hidden type is left out with a note. Text wrap is read too: an object whose dictionary has the wrap options (offset and Invert Wrap), or any graphic of a legacy wraparound group (`*w` … `*W`, before or after its type, with no offset), is a wrap object, and area type below it in its layer flows around it when the file opens, threaded type included (#2763). Kerning, underline and the other character and paragraph options aren't read yet. A `.ai` saved without PDF compatibility (a placeholder page) opens from its editing data alone, its point type, area type and type on a path made from the text document. A `.ai` whose PDF part shows only text isn't taken for that placeholder when its page states an art, trim or bleed box: it opens from its editing data alone where that reads, else from its PDF part (#1387). A `.ai` whose PDF part draws nothing at all (an empty page, with or without those boxes) opens from its editing data alone where that reads too: there is no page art to check its layers against, and the empty page would lose all of it. Text objects with an appearance keep their own text and frame, type of hidden layers stays hidden, and type on later artboards lands on its text objects (#1391); area type whose frame is too short for a line of the fallback font shows its first line (the frame is made taller, with a warning in the open result) (#1392). Symbols are read into the Symbols panel, in the file's symbol list order, with their art, their registration point and the instances in their art, and their instances come in live with their matrix, name, hide, lock, opacity, blending mode, isolation, knockout and opacity mask; a symbol whose art isn't read whole (type, placed files, an image it leaves out or anything else it doesn't read) isn't kept. Symbols are read only with the layers: a file that comes in as its page or PDF part (editing data with no layers, layers that can't be read, or any of the cases below) opens with an empty Symbols panel. Instances of symbols it can't read, instances with appearance changes of their own (a dynamic symbol's), pattern fills whose pattern it can't read, placed files the data keeps no preview of and anything else it doesn't read make the file come in as its page (on a layer that doesn't show, they are left out of that layer), with a warning saying what. An unread object on a shown layer whose box can be found instead comes in as a group of the page's objects inside that box, named after it, with the rest of the layers and groups kept and a warning listing what came in as the page's art; the file still comes in as its page when live art or another unread object shares that page art, when the object spans two artboards or lies on an artboard that has no page, when no page art lies inside its box, when that page art is inside a page group with a clip, mask, transparency or appearance, when the object holds a frame of threaded type, when the page art uses a pattern, image or swatch that the page lacks or that differs from the editing data's, or when the page art doesn't carry its transparency (#4806). The layers' art is also compared with the page (by lightness, so colours written as their CMYK equivalents compare alike, and by whether a pixel is inked at all); the page is used when they differ by more than 5% (away from type, when all the type is made from the text document), where one draws an object the other doesn't (away from type, whose lines may be laid out afresh), and when an EPS whose page is its art's box has art printed outside it (#735). A `.ai` is not compared with its page, and its PDF part is not imported, when its text document makes the type of every text object (at least one shows, and none is drawn by the appearance of the layer or group it is in), no object is unread, no placed file has a second placement, no live envelope keeps its drawn art, it declares no large canvas, and its artboards are its pages' trim boxes one for one, in points or in the first page's `UserUnit`: it opens from its layers, with the bleed of its pages' bleed boxes. When they differ because some objects draw differently (an object in another color, or one that only one of them draws), each top-level object of the layers that holds such a difference comes in as a group of the page's objects inside its box and the layers stay, with a warning that names the layer or sublayer of each such object as the Layers panel shows it (`<Layer>` for one without a name) and how many came in from it; an export or Save As to the file's own path then needs `acknowledgeLoss: true`, and a wrap object replaced this way keeps its wrap options. The file still comes in as its page when only edges or type differ, when a difference lies outside every top-level object, when more than half of the top-level objects or more than 64 hold one, when such an object is or holds type or holds a wrap object inside a group, when the page's type of a text object that stays lies inside such an object's box, when the page's art can't replace such an object for one of the reasons above for an unread object, when matching the differences to the objects would take too much work, or when the result still differs from the page. `editingData: "always"` keeps the objects as read, and placed files at the other point their data gives are tried as well. An EPS whose page is its art's box keeps that page when it comes in through its layers, not the editing data's artboard, and a text object counts as drawn by the page by its colours, not only its lightness, so a red stroke stacked over a dark red one stays (#1102). `textAs: "outlines"` opens a `.ai` whose type shows from its PDF part, which has the outlines; `editingData: false` opens any of them as its page or PDF part only, for print pipelines (#735). A file whose import left something out (hidden text, art or layers) is never written over by an export or Save As to its own path unless `acknowledgeLoss: true` (`convert --replace-lossy`), so the original keeps what the document lacks. Where a `.ai` can't be read that way (or its layers are turned off in the import options), we read its PDF-compatible part, so Illustrator-only live objects arrive as appearance, and plain groups arrive ungrouped: that part draws each object on its own and marks only layers, clipping groups and groups with opacity, blending or a mask (those come back). Art outside the artboards isn't in that part at all (Illustrator's PDF part leaves it out), so it doesn't open; the import says so in a note (#472). Its pages still go where the editing data puts the artboards (a grid stays a grid), with the art on each, when it has as many artboards as pages, of the same sizes (#1068); the page of the artboard `CropAreaActive` names is then the active artboard. A `.ai` whose editing data has artboards but no layers also opens on that page under the same check, and its pages stay where they are. A `.ai` whose PDF part's pages are cropped to its art (each page the box of all the art, which is the editing data's bounding box) instead of its artboards opens from its layers, with its own artboards, where they draw as that page does. Its pages are laid out so that art one of them draws past its artboard (notes beside a design, which the part doesn't clip) doesn't lie over the page before it in the row, where it was taken for that page's art: the check against the editing data then found art its layers don't have there and opened the file as its PDF part, without the art outside the artboards. That part also has no paragraphs: area type is written line by line, and comes back as area type only where its font is installed and lays the lines out with the same breaks, else as a point type object per line (#508). Art off the page that a PDF does draw opens on the pasteboard.
 the app's own editing copy of a file (an EPS after its `%%EOF`, a `.ai`'s `AIPrivateData` streams, a PDF's `AIPDFPrivateData` streams when it was saved with the editing data (#868), Zstandard or zlib, the EPS's in ASCII85) is not documented as a whole. VectorCraft reads its structure: layers and sublayers (names, order, visibility, lock, printing, preview, dimming, colour), groups as they were nested, compound paths (painted by their last path, or the last painted one, with the paths of groups inside them kept as their paths: #1410), clipping groups and layer clipping (several clipping paths in a clipping group, a layer or an opacity mask's art clip to their intersection, and a compound path of clipping paths stays one clip; clipping paths that would nest the art past the document's 32 levels stop the editing data from being read: #5789), object names, hidden and locked objects, fills and strokes (grey, CMYK, RGB, named and spot colours, spot colours defined in Lab with their Lab values (#1032), global process colours as global swatches at their tint; a stroke of width 0, `0 w`, on a path, a gradient-filled path, legacy type or in an art style comes in as a 0.25 pt hairline, as from PDF: #1671), linear and radial gradients, pattern fills with their patterns as pattern swatches (#1025), gradient and pattern names in the file up to their first newline (a name that another swatch, or a gradient or pattern defined earlier, already has is numbered "Sky 2"; a name without a newline is kept, and when another swatch has it, the pattern's swatch, or a named color sharing a gradient or pattern swatch's name, is numbered the same way), opacity, blend modes, isolation and knockout, embedded images where their matrix puts them, rotated ones too (#2269), with their alpha channel (CMYK images keep their ink amounts, as they do when a `.ai` opens from its PDF part, and an alpha channel that hides part of a CMYK image becomes a grayscale opacity mask), placed (linked) files as linked images in their place, each showing the low-resolution preview the file keeps of it until its file is found or relinked in the Links panel (#1264), with the folder the file keeps relative to the document's, where the link is looked for when its path is gone, guides, and every artboard where it is, with its center mark, cross hairs, video safe areas and video ruler pixel aspect ratio. VectorCraft reads `CropAreaActive`, an `/Int` in the dictionary that holds the artboard array, as the index of the active artboard in that array, and the file opens with that artboard active; without it, or when it names no artboard that opens, the first artboard is active. It also reads the Document Raster Effects Settings (resolution, color model, background, anti-alias, clipping mask, Add Around Object and Preserve Spot Colors), the author from the header's `%%For` (an EPS's own header when the editing data's has none), swatches for the header's `%%CMYKCustomColor` and `%%RGBCustomColor` colors that the document has none of, and `%%TemplateBox` in older files; a setting with a value of another type or out of range keeps its default. Objects on Path groups open live, with their path, their objects in order along it, Pivot and Rotate; one with a dragged spacing or other options opens as a plain group. A gradient with stops in the middle runs its whole ramp across its shape, and a gradient object does not pass its fill to the next path (#1390). An object whose art style is one fill and one stroke at most (solid colours, its own gradient, a variable-width profile) with Drop Shadow, Inner Glow, Outer Glow, Feather, Round Corners, Scribble, Offset Path, Outline Object, Outline Stroke, Convert to Shape, Tweak (only when it moves nothing) or Pucker & Bloat at 0 comes in as itself with them and their saved settings. A path, compound path or group (not a clipping group) whose only effect is Transform (not with copies or Random) or a Free Distort whose corners make a parallelogram comes in as itself with it too, when neither it nor anything in it paints with a gradient or pattern and everything in it is a path, compound path or group with no opacity mask and no effects of its own; Transform that scales, rotates or reflects needs nothing in it to be stroked. Twist as the only effect is read the same way on an unstroked path or compound path whose segments are all straight. One with more, other effects (Zig Zag, a Pucker & Bloat of another amount, a Free Distort with other corners), an effect setting that is not read (an unknown key, a missing or out-of-range value, a Scribble with a color of its own), dashes aligned to corners, a brush other than a Calligraphic or Art one, a Calligraphic brush with settings of its own or an angle that follows the path, or an Art brush other than the ones described next comes in as its drawn look (a group named after it). Objects in a symbol defined before the file's art styles section, as newer files write it, take the same styles as the layers' objects. A path with a Calligraphic brush otherwise comes in as the path, the brush on its stroke at the stroke's weight, which scales the brush (#372), and so does a path with an Art brush, whose weight scales the art across the path, when all of these hold: the brush stretches its art along the path, unflipped, at 100% in Tints; the path's settings are the brush's own, with no entry that isn't read, no variable width and no effects; its stroke isn't a swatch; and the art is paths, compound paths and groups in solid fills, with no strokes, masks or effects, and has some length along the path. A stroke takes the brush the Brushes panel keeps under its name, and one whose name the panel doesn't keep comes in as its drawn look. Type with an Art brush keeps its drawn look under the type. A Calligraphic brush's Pressure, Tilt, Bearing and Rotation come in as those channels (a 6D Art Pen's brushes vary with the pressure, the bearing and the barrel's rotation); its Stylus Wheel varies at random. The file's Calligraphic, Scatter, Art and Bristle brushes replace the default ones in the Brushes panel, in the file's order, also when the file comes in as its PDF part (a brush library has no layers); pattern brushes and brushes it can't read are left out with a note. When the file opens from its layers, the spot colors in the art of each brush that comes in become swatches, and that art's colors count toward the document's color mode, as a pattern's do; a spot color that the page's art, a pattern or a symbol also defines keeps the value defined there. Type keeps its art style as a live appearance whatever its stack (an Art brush aside), so it can be retyped: each fill and stroke of the style's stack (solid colours, gradients and pattern fills, placed as the drawn look places them) with its own opacity, blend mode and effects, the effects on the whole object, and where the characters paint among them; the effects read are Warp, Offset Path, Outline Object, Outline Stroke, Transform (with copies, Transform Objects, Transform Patterns and Scale Strokes & Effects; not with Random), Free Distort, Pucker & Bloat, Twist, Zig Zag, Tweak (only when it moves nothing, the file holding none of its random outline), Drop Shadow, Inner Glow, Outer Glow, Feather, Round Corners, Scribble, Gaussian Blur, Bas Relief (its settings at their defaults) and Convert to Shape, and a style with others, or with an effect setting that isn't read, keeps the type's drawn look. Convert to Shape keeps its Rectangle, Rounded Rectangle or Ellipse, its Absolute or Relative size (a relative size in the file is added to each side) and its corner radius; a relative Ellipse, or a setting that isn't read, keeps the drawn look. The page's drawing of such a style isn't held to look like VectorCraft's where its drawn look lay. Gradients take their matrix (`Xm`, radials and skewed ones too), focal point and the order of stops sharing a ramp point; gradient meshes, a clipping path's own fill and its stroke, and the artboards' names are read too. `editingData: "always"` (`convert --editing-data`) opens a `.ai` or an Illustrator EPS from its editing data even where it draws differently from its page, which can be older, with a note. Type is made from the file's text document, whole and editable, shown or not: point type (its frame's matrix, which newer files leave out when it is neither turned nor scaled, read as none), area type (a story in several frames as threaded type) and type on a path, with its characters, fonts, size, leading, tracking, scaling, baseline shift, fill and stroke (grey, RGB or CMYK), alignment, indents and paragraph spacing (a character attribute a run doesn't set comes from its character style, then the style that one is based on, then the document's defaults); area type keeps its frame's Area Type Options rows and columns, the gutter between rows and the gutter between columns, and its first baseline (Fixed, Cap Height, Leading or x Height) with its minimum; the page's drawing of it (often in pieces) is left out. Vertical type keeps its orientation, its columns from right to left, and a run set to Tate-chu-yoko keeps that setting. When it makes the type of every text object that shows, the page's type is only compared with it, each text object keeps its own group, frame and layer, and a line break inside a paragraph stays one. Where it can't make a text object's type (a frame of another kind), that text object takes the page's type where the text document puts its lines, or else what is left of the page's type in painting order (no group around it); the page's type where made type draws stays that type's, and hidden type is left out with a note. Text wrap is read too: an object whose dictionary has the wrap options (offset and Invert Wrap), or any graphic of a legacy wraparound group (`*w` … `*W`, before or after its type, with no offset), is a wrap object, and area type below it in its layer flows around it when the file opens, threaded type included (#2763). Kerning, underline and the other character and paragraph options aren't read yet. A `.ai` saved without PDF compatibility (a placeholder page) opens from its editing data alone, its point type, area type and type on a path made from the text document. A `.ai` whose PDF part shows only text isn't taken for that placeholder when its page states an art, trim or bleed box: it opens from its editing data alone where that reads, else from its PDF part (#1387). A `.ai` whose PDF part draws nothing at all (an empty page, with or without those boxes) opens from its editing data alone where that reads too: there is no page art to check its layers against, and the empty page would lose all of it. Text objects with an appearance keep their own text and frame, type of hidden layers stays hidden, and type on later artboards lands on its text objects (#1391); area type whose frame is too short for a line of the fallback font shows its first line (the frame is made taller, with a warning in the open result) (#1392). Symbols are read into the Symbols panel, in the file's symbol list order, with their art, their registration point and the instances in their art, and their instances come in live with their matrix, name, hide, lock, opacity, blending mode, isolation, knockout and opacity mask; a symbol whose art isn't read whole (type, placed files, an image it leaves out or anything else it doesn't read) isn't kept. Symbols are read only with the layers: a file that comes in as its page or PDF part (editing data with no layers, layers that can't be read, or any of the cases below) opens with an empty Symbols panel. Instances of symbols it can't read, instances with appearance changes of their own (a dynamic symbol's), pattern fills whose pattern it can't read, placed files the data keeps no preview of and anything else it doesn't read make the file come in as its page (on a layer that doesn't show, they are left out of that layer), with a warning saying what. An unread object on a shown layer whose box can be found instead comes in as a group of the page's objects inside that box, named after it, with the rest of the layers and groups kept and a warning listing what came in as the page's art; the file still comes in as its page when live art or another unread object shares that page art, when the object spans two artboards or lies on an artboard that has no page, when no page art lies inside its box, when that page art is inside a page group with a clip, mask, transparency or appearance, when the object holds a frame of threaded type, when the page art uses a pattern, image or swatch that the page lacks or that differs from the editing data's, or when the page art doesn't carry its transparency (#4806). The layers' art is also compared with the page (by lightness, so colours written as their CMYK equivalents compare alike, and by whether a pixel is inked at all); the page is used when they differ by more than 5% (away from type, when all the type is made from the text document), where one draws an object the other doesn't (away from type, whose lines may be laid out afresh), and when an EPS whose page is its art's box has art printed outside it (#735). A `.ai` is not compared with its page, and its PDF part is not imported, when its text document makes the type of every text object (at least one shows, and none is drawn by the appearance of the layer or group it is in), no object is unread, no placed file has a second placement, no live envelope keeps its drawn art, it declares no large canvas, and its artboards are its pages' trim boxes one for one, in points or in the first page's `UserUnit`: it opens from its layers, with the bleed of its pages' bleed boxes. When they differ because some objects draw differently (an object in another color, or one that only one of them draws), each top-level object of the layers that holds such a difference comes in as a group of the page's objects inside its box and the layers stay, with a warning that names the layer or sublayer of each such object as the Layers panel shows it (`<Layer>` for one without a name) and how many came in from it; an export or Save As to the file's own path then needs `acknowledgeLoss: true`, and a wrap object replaced this way keeps its wrap options. The file still comes in as its page when only edges or type differ, when a difference lies outside every top-level object, when more than half of the top-level objects or more than 64 hold one, when such an object is or holds type or holds a wrap object inside a group, when the page's type of a text object that stays lies inside such an object's box, when the page's art can't replace such an object for one of the reasons above for an unread object, when matching the differences to the objects would take too much work, or when the result still differs from the page. `editingData: "always"` keeps the objects as read, and placed files at the other point their data gives are tried as well. An EPS whose page is its art's box keeps that page when it comes in through its layers, not the editing data's artboard, and a text object counts as drawn by the page by its colours, not only its lightness, so a red stroke stacked over a dark red one stays (#1102). `textAs: "outlines"` opens a `.ai` whose type shows from its PDF part, which has the outlines; `editingData: false` opens any of them as its page or PDF part only, for print pipelines (#735). A file whose import left something out (hidden text, art or layers) is never written over by an export or Save As to its own path unless `acknowledgeLoss: true` (`convert --replace-lossy`), so the original keeps what the document lacks. Where a `.ai` can't be read that way (or its layers are turned off in the import options), we read its PDF-compatible part, so Illustrator-only live objects arrive as appearance, and plain groups arrive ungrouped: that part draws each object on its own and marks only layers, clipping groups and groups with opacity, blending or a mask (those come back). Art outside the artboards isn't in that part at all (Illustrator's PDF part leaves it out), so it doesn't open; the import says so in a note (#472). Its pages still go where the editing data puts the artboards (a grid stays a grid), with the art on each, when it has as many artboards as pages, of the same sizes (#1068); the page of the artboard `CropAreaActive` names is then the active artboard. A `.ai` whose editing data has artboards but no layers also opens on that page under the same check, and its pages stay where they are. A `.ai` whose PDF part's pages are cropped to its art (each page the box of all the art, which is the editing data's bounding box) instead of its artboards opens from its layers, with its own artboards, where they draw as that page does. Its pages are laid out so that art one of them draws past its artboard (notes beside a design, which the part doesn't clip) doesn't lie over the page before it in the row, where it was taken for that page's art: the check against the editing data then found art its layers don't have there and opened the file as its PDF part, without the art outside the artboards. That part also has no paragraphs: area type is written line by line, and comes back as area type only where its font is installed and lays the lines out with the same breaks, else as a point type object per line (#508). Art off the page that a PDF does draw opens on the pasteboard.
 the app's own editing copy of a file (an EPS after its `%%EOF`, a `.ai`'s `AIPrivateData` streams, a PDF's `AIPDFPrivateData` streams when it was saved with the editing data (#868), Zstandard or zlib, the EPS's in ASCII85) is not documented as a whole. VectorCraft reads its structure: layers and sublayers (names, order, visibility, lock, printing, preview, dimming, colour), groups as they were nested, compound paths (painted by their last path, or the last painted one, with the paths of groups inside them kept as their paths: #1410), clipping groups and layer clipping (several clipping paths in a clipping group, a layer or an opacity mask's art clip to their intersection, and a compound path of clipping paths stays one clip; clipping paths that would nest the art past the document's 32 levels stop the editing data from being read: #5789), object names, hidden and locked objects, fills and strokes (grey, CMYK, RGB, named and spot colours, spot colours defined in Lab with their Lab values (#1032), global process colours as global swatches at their tint; a stroke of width 0, `0 w`, on a path, a gradient-filled path, legacy type or in an art style comes in as a 0.25 pt hairline, as from PDF: #1671), linear and radial gradients, pattern fills with their patterns as pattern swatches (#1025), gradient and pattern names in the file up to their first newline (a name that another swatch, or a gradient or pattern defined earlier, already has is numbered "Sky 2"; a name without a newline is kept, and when another swatch has it, the pattern's swatch, or a named color sharing a gradient or pattern swatch's name, is numbered the same way), opacity, blend modes, isolation and knockout, embedded images where their matrix puts them, rotated ones too (#2269), with their alpha channel (CMYK images keep their ink amounts, as they do when a `.ai` opens from its PDF part, and an alpha channel that hides part of a CMYK image becomes a grayscale opacity mask), placed (linked) files as linked images in their place, each showing the low-resolution preview the file keeps of it until its file is found or relinked in the Links panel (#1264), with the folder the file keeps relative to the document's, where the link is looked for when its path is gone, guides, and every artboard where it is, with its center mark, cross hairs, video safe areas and video ruler pixel aspect ratio. VectorCraft reads `CropAreaActive`, an `/Int` in the dictionary that holds the artboard array, as the index of the active artboard in that array, and the file opens with that artboard active; without it, or when it names no artboard that opens, the first artboard is active. It also reads the Document Raster Effects Settings (resolution, color model, background, anti-alias, clipping mask, Add Around Object and Preserve Spot Colors), the author from the header's `%%For` (an EPS's own header when the editing data's has none), swatches for the header's `%%CMYKCustomColor` and `%%RGBCustomColor` colors that the document has none of, and `%%TemplateBox` in older files; a setting with a value of another type or out of range keeps its default. Objects on Path groups open live, with their path, their objects in order along it, Pivot and Rotate; one with a dragged spacing or other options opens as a plain group. A gradient with stops in the middle runs its whole ramp across its shape, and a gradient object does not pass its fill to the next path (#1390). An object whose art style is one fill and one stroke at most (solid colours, its own gradient, a variable-width profile) with Drop Shadow, Inner Glow, Outer Glow, Feather, Round Corners, Scribble, Offset Path, Outline Object, Outline Stroke, Convert to Shape, Tweak (only when it moves nothing) or Pucker & Bloat at 0 comes in as itself with them and their saved settings. A path, compound path or group (not a clipping group) whose only effect is Transform (not with copies or Random) or a Free Distort whose corners make a parallelogram comes in as itself with it too, when neither it nor anything in it paints with a gradient or pattern and everything in it is a path, compound path or group with no opacity mask and no effects of its own; Transform that scales, rotates or reflects needs nothing in it to be stroked. Twist as the only effect is read the same way on an unstroked path or compound path whose segments are all straight. One with more, other effects (Zig Zag, a Pucker & Bloat of another amount, a Free Distort with other corners), an effect setting that is not read (an unknown key, a missing or out-of-range value, a Scribble with a color of its own), dashes aligned to corners, a brush other than a Calligraphic one, or a Calligraphic brush with settings of its own or an angle that follows the path comes in as its drawn look (a group named after it). A path with a Calligraphic brush otherwise comes in as the path, the brush on its stroke at the stroke's weight, which scales the brush (#372). A Calligraphic brush's Pressure, Tilt, Bearing and Rotation come in as those channels (a 6D Art Pen's brushes vary with the pressure, the bearing and the barrel's rotation); its Stylus Wheel varies at random. The file's Calligraphic, Scatter, Art and Bristle brushes replace the default ones in the Brushes panel, in the file's order, also when the file comes in as its PDF part (a brush library has no layers); pattern brushes and brushes it can't read are left out with a note. When the file opens from its layers, the spot colors in the art of each brush that comes in become swatches, and that art's colors count toward the document's color mode, as a pattern's do; a spot color that the page's art, a pattern or a symbol also defines keeps the value defined there. Type keeps its art style as a live appearance whatever its stack, so it can be retyped: each fill and stroke of the style's stack (solid colours, gradients and pattern fills, placed as the drawn look places them) with its own opacity, blend mode and effects, the effects on the whole object, and where the characters paint among them; the effects read are Warp, Offset Path, Outline Object, Outline Stroke, Transform (with copies, Transform Objects, Transform Patterns and Scale Strokes & Effects; not with Random), Free Distort, Pucker & Bloat, Twist, Zig Zag, Tweak (only when it moves nothing, the file holding none of its random outline), Drop Shadow, Inner Glow, Outer Glow, Feather, Round Corners, Scribble, Gaussian Blur, Bas Relief (its settings at their defaults) and Convert to Shape, and a style with others, or with an effect setting that isn't read, keeps the type's drawn look. Convert to Shape keeps its Rectangle, Rounded Rectangle or Ellipse, its Absolute or Relative size (a relative size in the file is added to each side) and its corner radius; a relative Ellipse, or a setting that isn't read, keeps the drawn look. The page's drawing of such a style isn't held to look like VectorCraft's where its drawn look lay. Gradients take their matrix (`Xm`, radials and skewed ones too), focal point and the order of stops sharing a ramp point; gradient meshes, a clipping path's own fill and its stroke, and the artboards' names are read too. `editingData: "always"` (`convert --editing-data`) opens a `.ai` or an Illustrator EPS from its editing data even where it draws differently from its page, which can be older, with a note. Type is made from the file's text document, whole and editable, shown or not: point type (its frame's matrix, which newer files leave out when it is neither turned nor scaled, read as none), area type (a story in several frames as threaded type) and type on a path, with its characters, fonts, size, leading, tracking, scaling, baseline shift, fill and stroke (grey, RGB or CMYK), alignment, indents and paragraph spacing (a character attribute a run doesn't set comes from its character style, then the style that one is based on, then the document's defaults); area type keeps its frame's Area Type Options rows and columns, the gutter between rows and the gutter between columns, and its first baseline (Fixed, Cap Height, Leading or x Height) with its minimum; the page's drawing of it (often in pieces) is left out. Vertical type keeps its orientation, its columns from right to left, and a run set to Tate-chu-yoko keeps that setting. When it makes the type of every text object that shows, the page's type is only compared with it, each text object keeps its own group, frame and layer, and a line break inside a paragraph stays one. Where it can't make a text object's type (a frame of another kind), that text object takes the page's type where the text document puts its lines, or else what is left of the page's type in painting order (no group around it); the page's type where made type draws stays that type's, and hidden type is left out with a note. Text wrap is read too: an object whose dictionary has the wrap options (offset and Invert Wrap), or any graphic of a legacy wraparound group (`*w` … `*W`, before or after its type, with no offset), is a wrap object, and area type below it in its layer flows around it when the file opens, threaded type included (#2763). Kerning, underline and the other character and paragraph options aren't read yet. A `.ai` saved without PDF compatibility (a placeholder page) opens from its editing data alone, its point type, area type and type on a path made from the text document. A `.ai` whose PDF part shows only text isn't taken for that placeholder when its page states an art, trim or bleed box: it opens from its editing data alone where that reads, else from its PDF part (#1387). A `.ai` whose PDF part draws nothing at all (an empty page, with or without those boxes) opens from its editing data alone where that reads too: there is no page art to check its layers against, and the empty page would lose all of it. Text objects with an appearance keep their own text and frame, type of hidden layers stays hidden, and type on later artboards lands on its text objects (#1391); area type whose frame is too short for a line of the fallback font shows its first line (the frame is made taller, with a warning in the open result) (#1392). Symbols are read into the Symbols panel, in the file's symbol list order, with their art, their registration point and the instances in their art, and their instances come in live with their matrix, name, hide, lock, opacity, blending mode, isolation, knockout and opacity mask; a symbol whose art isn't read whole (type, placed files, an image it leaves out or anything else it doesn't read) isn't kept. Symbols are read only with the layers: a file that comes in as its page or PDF part (editing data with no layers, layers that can't be read, or any of the cases below) opens with an empty Symbols panel. Instances of symbols it can't read, instances with appearance changes of their own (a dynamic symbol's), pattern fills whose pattern it can't read, placed files the data keeps no preview of and anything else it doesn't read make the file come in as its page (on a layer that doesn't show, they are left out of that layer), with a warning saying what. An unread object on a shown layer whose box can be found instead comes in as a group of the page's objects inside that box, named after it, with the rest of the layers and groups kept and a warning listing what came in as the page's art; the file still comes in as its page when live art or another unread object shares that page art, when the object spans two artboards or lies on an artboard that has no page, when no page art lies inside its box, when that page art is inside a page group with a clip, mask, transparency or appearance, when the object holds a frame of threaded type, when the page art uses a pattern, image or swatch that the page lacks or that differs from the editing data's, or when the page art doesn't carry its transparency (#4806). The layers' art is also compared with the page (by lightness, so colours written as their CMYK equivalents compare alike, and by whether a pixel is inked at all); the page is used when they differ by more than 5% (away from type, when all the type is made from the text document), where one draws an object the other doesn't (away from type, whose lines may be laid out afresh), and when an EPS whose page is its art's box has art printed outside it (#735). A `.ai` is not compared with its page, and its PDF part is not imported, when its text document makes the type of every text object (at least one shows, and none is drawn by the appearance of the layer or group it is in), no object is unread, no placed file has a second placement, no live envelope keeps its drawn art, it declares no large canvas, and its artboards are its pages' trim boxes one for one, in points or in the first page's `UserUnit`: it opens from its layers, with the bleed of its pages' bleed boxes. When they differ because some objects draw differently (an object in another color, or one that only one of them draws), each top-level object of the layers that holds such a difference comes in as a group of the page's objects inside its box and the layers stay, with a warning that names the layer or sublayer of each such object as the Layers panel shows it (`<Layer>` for one without a name) and how many came in from it; an export or Save As to the file's own path then needs `acknowledgeLoss: true`, and a wrap object replaced this way keeps its wrap options. The file still comes in as its page when only edges or type differ, when a difference lies outside every top-level object, when more than half of the top-level objects or more than 64 hold one, when such an object is or holds type or holds a wrap object inside a group, when the page's type of a text object that stays lies inside such an object's box, when the page's art can't replace such an object for one of the reasons above for an unread object, when matching the differences to the objects would take too much work, or when the result still differs from the page. `editingData: "always"` keeps the objects as read, and placed files at the other point their data gives are tried as well. An EPS whose page is its art's box keeps that page when it comes in through its layers, not the editing data's artboard, and a text object counts as drawn by the page by its colours, not only its lightness, so a red stroke stacked over a dark red one stays (#1102). `textAs: "outlines"` opens a `.ai` whose type shows from its PDF part, which has the outlines; `editingData: false` opens any of them as its page or PDF part only, for print pipelines (#735). A file whose import left something out (hidden text, art or layers) is never written over by an export or Save As to its own path unless `acknowledgeLoss: true` (`convert --replace-lossy`), so the original keeps what the document lacks. Where a `.ai` can't be read that way (or its layers are turned off in the import options), we read its PDF-compatible part, so Illustrator-only live objects arrive as appearance, and plain groups arrive ungrouped: that part draws each object on its own and marks only layers, clipping groups and groups with opacity, blending or a mask (those come back). Art outside the artboards isn't in that part at all (Illustrator's PDF part leaves it out), so it doesn't open; the import says so in a note (#472). Its pages still go where the editing data puts the artboards (a grid stays a grid), with the art on each, when it has as many artboards as pages, of the same sizes (#1068); the page of the artboard `CropAreaActive` names is then the active artboard. A `.ai` whose editing data has artboards but no layers also opens on that page under the same check, and its pages stay where they are. A `.ai` whose PDF part's pages are cropped to its art (each page the box of all the art, which is the editing data's bounding box) instead of its artboards opens from its layers, with its own artboards, where they draw as that page does. Its pages are laid out so that art one of them draws past its artboard (notes beside a design, which the part doesn't clip) doesn't lie over the page before it in the row, where it was taken for that page's art: the check against the editing data then found art its layers don't have there and opened the file as its PDF part, without the art outside the artboards. That part also has no paragraphs: area type is written line by line, and comes back as area type only where its font is installed and lays the lines out with the same breaks, else as a point type object per line (#508). Art off the page that a PDF does draw opens on the pasteboard.
-the app's own editing copy of a file (an EPS after its `%%EOF`, a `.ai`'s `AIPrivateData` streams, a PDF's `AIPDFPrivateData` streams when it was saved with the editing data (#868), Zstandard or zlib, the EPS's in ASCII85) is not documented as a whole. VectorCraft reads its structure: layers and sublayers (names, order, visibility, lock, printing, preview, dimming, colour), groups as they were nested, compound paths (painted by their last path, or the last painted one, with the paths of groups inside them kept as their paths: #1410), clipping groups and layer clipping (several clipping paths in a clipping group, a layer or an opacity mask's art clip to their intersection, and a compound path of clipping paths stays one clip; clipping paths that would nest the art past the document's 32 levels stop the editing data from being read: #5789), object names, hidden and locked objects, fills and strokes (grey, CMYK, RGB, named and spot colours, spot colours defined in Lab with their Lab values (#1032), global process colours as global swatches at their tint; a stroke of width 0, `0 w`, on a path, a gradient-filled path, legacy type or in an art style comes in as a 0.25 pt hairline, as from PDF: #1671), linear and radial gradients, pattern fills with their patterns as pattern swatches (#1025), gradient and pattern names in the file up to their first newline (a name that another swatch, or a gradient or pattern defined earlier, already has is numbered "Sky 2"; a name without a newline is kept, and when another swatch has it, the pattern's swatch, or a named color sharing a gradient or pattern swatch's name, is numbered the same way), opacity, blend modes, isolation and knockout, embedded images where their matrix puts them, rotated ones too (#2269), with their alpha channel (CMYK images keep their ink amounts, as they do when a `.ai` opens from its PDF part, and an alpha channel that hides part of a CMYK image becomes a grayscale opacity mask), placed (linked) files as linked images in their place, each showing the low-resolution preview the file keeps of it until its file is found or relinked in the Links panel (#1264), with the folder the file keeps relative to the document's, where the link is looked for when its path is gone, guides, and every artboard where it is, with its center mark, cross hairs, video safe areas and video ruler pixel aspect ratio. VectorCraft reads `CropAreaActive`, an `/Int` in the dictionary that holds the artboard array, as the index of the active artboard in that array, and the file opens with that artboard active; without it, or when it names no artboard that opens, the first artboard is active. It also reads the Document Raster Effects Settings (resolution, color model, background, anti-alias, clipping mask, Add Around Object and Preserve Spot Colors), the author from the header's `%%For` (an EPS's own header when the editing data's has none), swatches for the header's `%%CMYKCustomColor` and `%%RGBCustomColor` colors that the document has none of, and `%%TemplateBox` in older files; a setting with a value of another type or out of range keeps its default. Objects on Path groups open live, with their path, their objects in order along it, Pivot and Rotate; one with a dragged spacing or other options opens as a plain group. A gradient with stops in the middle runs its whole ramp across its shape, and a gradient object does not pass its fill to the next path (#1390). An object whose art style is one fill and one stroke at most (solid colours, its own gradient, a variable-width profile) with Drop Shadow, Inner Glow, Outer Glow, Feather, Round Corners, Scribble, Offset Path, Outline Object, Outline Stroke, Convert to Shape, Tweak (only when it moves nothing) or Pucker & Bloat at 0 comes in as itself with them and their saved settings. A path, compound path or group (not a clipping group) whose only effect is Transform (not with copies or Random) or a Free Distort whose corners make a parallelogram comes in as itself with it too, when neither it nor anything in it paints with a gradient or pattern and everything in it is a path, compound path or group with no opacity mask and no effects of its own; Transform that scales, rotates or reflects needs nothing in it to be stroked. Twist as the only effect is read the same way on an unstroked path or compound path whose segments are all straight. One with more, other effects (Zig Zag, a Pucker & Bloat of another amount, a Free Distort with other corners), an effect setting that is not read (an unknown key, a missing or out-of-range value, a Scribble with a color of its own), dashes aligned to corners, a brush other than a Calligraphic one, or a Calligraphic brush with settings of its own or an angle that follows the path comes in as its drawn look (a group named after it). Objects in a symbol defined before the file's art styles section, as newer files write it, take the same styles as the layers' objects. A path with a Calligraphic brush otherwise comes in as the path, the brush on its stroke at the stroke's weight, which scales the brush (#372). A Calligraphic brush's Pressure, Tilt, Bearing and Rotation come in as those channels (a 6D Art Pen's brushes vary with the pressure, the bearing and the barrel's rotation); its Stylus Wheel varies at random. The file's Calligraphic, Scatter, Art and Bristle brushes replace the default ones in the Brushes panel, in the file's order, also when the file comes in as its PDF part (a brush library has no layers); pattern brushes and brushes it can't read are left out with a note. Type keeps its art style as a live appearance whatever its stack, so it can be retyped: each fill and stroke of the style's stack (solid colours, gradients and pattern fills, placed as the drawn look places them) with its own opacity, blend mode and effects, the effects on the whole object, and where the characters paint among them; the effects read are Warp, Offset Path, Outline Object, Outline Stroke, Transform (with copies, Transform Objects, Transform Patterns and Scale Strokes & Effects; not with Random), Free Distort, Pucker & Bloat, Twist, Zig Zag, Tweak (only when it moves nothing, the file holding none of its random outline), Drop Shadow, Inner Glow, Outer Glow, Feather, Round Corners, Scribble, Gaussian Blur, Bas Relief (its settings at their defaults) and Convert to Shape, and a style with others, or with an effect setting that isn't read, keeps the type's drawn look. Convert to Shape keeps its Rectangle, Rounded Rectangle or Ellipse, its Absolute or Relative size (a relative size in the file is added to each side) and its corner radius; a relative Ellipse, or a setting that isn't read, keeps the drawn look. The page's drawing of such a style isn't held to look like VectorCraft's where its drawn look lay. Gradients take their matrix (`Xm`, radials and skewed ones too), focal point and the order of stops sharing a ramp point; gradient meshes, a clipping path's own fill and its stroke, and the artboards' names are read too. `editingData: "always"` (`convert --editing-data`) opens a `.ai` or an Illustrator EPS from its editing data even where it draws differently from its page, which can be older, with a note. Type is made from the file's text document, whole and editable, shown or not: point type (its frame's matrix, which newer files leave out when it is neither turned nor scaled, read as none), area type (a story in several frames as threaded type) and type on a path, with its characters, fonts, size, leading, tracking, scaling, baseline shift, fill and stroke (grey, RGB or CMYK), alignment, indents and paragraph spacing (a character attribute a run doesn't set comes from its character style, then the style that one is based on, then the document's defaults); area type keeps its frame's Area Type Options rows and columns, the gutter between rows and the gutter between columns, and its first baseline (Fixed, Cap Height, Leading or x Height) with its minimum; type on a path keeps its frame's Type on a Path effect, Align to Path and Flip (a frame whose options set key 6 to true keeps their defaults), and the first frame's Spacing is fitted from the file's layout, not read from the dialog's value; the distance from the path under Align to Path comes from VectorCraft's font metrics, and on Arial at 24 pt it differs from the distance the file keeps by 1.1 pt (Ascender), 0.3 pt (Center) and 2.7 pt (Descender); the fit under Gravity does not reproduce the file's layout, and its glyphs can lie up to 7.4 pt from the positions the file keeps; the page's drawing of it (often in pieces) is left out. Vertical type keeps its orientation, its columns from right to left, and a run set to Tate-chu-yoko keeps that setting. When it makes the type of every text object that shows, the page's type is only compared with it, each text object keeps its own group, frame and layer, and a line break inside a paragraph stays one. Where it can't make a text object's type (a frame of another kind), that text object takes the page's type where the text document puts its lines, or else what is left of the page's type in painting order (no group around it); the page's type where made type draws stays that type's, and hidden type is left out with a note. Text wrap is read too: an object whose dictionary has the wrap options (offset and Invert Wrap), or any graphic of a legacy wraparound group (`*w` … `*W`, before or after its type, with no offset), is a wrap object, and area type below it in its layer flows around it when the file opens, threaded type included (#2763). Kerning, underline and the other character and paragraph options aren't read yet. A `.ai` saved without PDF compatibility (a placeholder page) opens from its editing data alone, its point type, area type and type on a path made from the text document. A `.ai` whose PDF part shows only text isn't taken for that placeholder when its page states an art, trim or bleed box: it opens from its editing data alone where that reads, else from its PDF part (#1387). A `.ai` whose PDF part draws nothing at all (an empty page, with or without those boxes) opens from its editing data alone where that reads too: there is no page art to check its layers against, and the empty page would lose all of it. Text objects with an appearance keep their own text and frame, type of hidden layers stays hidden, and type on later artboards lands on its text objects (#1391); area type whose frame is too short for a line of the fallback font shows its first line (the frame is made taller, with a warning in the open result) (#1392). Symbols are read into the Symbols panel, in the file's symbol list order, with their art, their registration point and the instances in their art, and their instances come in live with their matrix, name, hide, lock, opacity, blending mode, isolation, knockout and opacity mask; a symbol whose art isn't read whole (type, placed files, an image it leaves out or anything else it doesn't read) isn't kept. Symbols are read only with the layers: a file that comes in as its page or PDF part (editing data with no layers, layers that can't be read, or any of the cases below) opens with an empty Symbols panel. Instances of symbols it can't read, instances with appearance changes of their own (a dynamic symbol's), pattern fills whose pattern it can't read, placed files the data keeps no preview of and anything else it doesn't read make the file come in as its page (on a layer that doesn't show, they are left out of that layer), with a warning saying what. An unread object on a shown layer whose box can be found instead comes in as a group of the page's objects inside that box, named after it, with the rest of the layers and groups kept and a warning listing what came in as the page's art; the file still comes in as its page when live art or another unread object shares that page art, when the object spans two artboards or lies on an artboard that has no page, when no page art lies inside its box, when that page art is inside a page group with a clip, mask, transparency or appearance, when the object holds a frame of threaded type, when the page art uses a pattern, image or swatch that the page lacks or that differs from the editing data's, or when the page art doesn't carry its transparency (#4806). The layers' art is also compared with the page (by lightness, so colours written as their CMYK equivalents compare alike, and by whether a pixel is inked at all); the page is used when they differ by more than 5% (away from type, when all the type is made from the text document), where one draws an object the other doesn't (away from type, whose lines may be laid out afresh), and when an EPS whose page is its art's box has art printed outside it (#735). A `.ai` is not compared with its page, and its PDF part is not imported, when its text document makes the type of every text object (at least one shows, and none is drawn by the appearance of the layer or group it is in), no object is unread, no placed file has a second placement, no live envelope keeps its drawn art, it declares no large canvas, and its artboards are its pages' trim boxes one for one, in points or in the first page's `UserUnit`: it opens from its layers, with the bleed of its pages' bleed boxes. When they differ because some objects draw differently (an object in another color, or one that only one of them draws), each top-level object of the layers that holds such a difference comes in as a group of the page's objects inside its box and the layers stay, with a warning that names the layer or sublayer of each such object as the Layers panel shows it (`<Layer>` for one without a name) and how many came in from it; an export or Save As to the file's own path then needs `acknowledgeLoss: true`, and a wrap object replaced this way keeps its wrap options. The file still comes in as its page when only edges or type differ, when a difference lies outside every top-level object, when more than half of the top-level objects or more than 64 hold one, when such an object is or holds type or holds a wrap object inside a group, when the page's type of a text object that stays lies inside such an object's box, when the page's art can't replace such an object for one of the reasons above for an unread object, when matching the differences to the objects would take too much work, or when the result still differs from the page. `editingData: "always"` keeps the objects as read, and placed files at the other point their data gives are tried as well. An EPS whose page is its art's box keeps that page when it comes in through its layers, not the editing data's artboard, and a text object counts as drawn by the page by its colours, not only its lightness, so a red stroke stacked over a dark red one stays (#1102). `textAs: "outlines"` opens a `.ai` whose type shows from its PDF part, which has the outlines; `editingData: false` opens any of them as its page or PDF part only, for print pipelines (#735). A file whose import left something out (hidden text, art or layers) is never written over by an export or Save As to its own path unless `acknowledgeLoss: true` (`convert --replace-lossy`), so the original keeps what the document lacks. Where a `.ai` can't be read that way (or its layers are turned off in the import options), we read its PDF-compatible part, so Illustrator-only live objects arrive as appearance, and plain groups arrive ungrouped: that part draws each object on its own and marks only layers, clipping groups and groups with opacity, blending or a mask (those come back). Art outside the artboards isn't in that part at all (Illustrator's PDF part leaves it out), so it doesn't open; the import says so in a note (#472). Its pages still go where the editing data puts the artboards (a grid stays a grid), with the art on each, when it has as many artboards as pages, of the same sizes (#1068); the page of the artboard `CropAreaActive` names is then the active artboard. A `.ai` whose editing data has artboards but no layers also opens on that page under the same check, and its pages stay where they are. A `.ai` whose PDF part's pages are cropped to its art (each page the box of all the art, which is the editing data's bounding box) instead of its artboards opens from its layers, with its own artboards, where they draw as that page does. Its pages are laid out so that art one of them draws past its artboard (notes beside a design, which the part doesn't clip) doesn't lie over the page before it in the row, where it was taken for that page's art: the check against the editing data then found art its layers don't have there and opened the file as its PDF part, without the art outside the artboards. That part also has no paragraphs: area type is written line by line, and comes back as area type only where its font is installed and lays the lines out with the same breaks, else as a point type object per line (#508). Art off the page that a PDF does draw opens on the pasteboard.
-the app's own editing copy of a file (an EPS after its `%%EOF`, a `.ai`'s `AIPrivateData` streams, a PDF's `AIPDFPrivateData` streams when it was saved with the editing data (#868), Zstandard or zlib, the EPS's in ASCII85) is not documented as a whole. VectorCraft reads its structure: layers and sublayers (names, order, visibility, lock, printing, preview, dimming, colour), groups as they were nested, compound paths (painted by their last path, or the last painted one, with the paths of groups inside them kept as their paths: #1410), clipping groups and layer clipping (several clipping paths in a clipping group, a layer or an opacity mask's art clip to their intersection, and a compound path of clipping paths stays one clip; clipping paths that would nest the art past the document's 32 levels stop the editing data from being read: #5789), object names, hidden and locked objects, fills and strokes (grey, CMYK, RGB, named and spot colours, spot colours defined in Lab with their Lab values (#1032), global process colours as global swatches at their tint; a stroke of width 0, `0 w`, on a path, a gradient-filled path, legacy type or in an art style comes in as a 0.25 pt hairline, as from PDF: #1671), linear and radial gradients, pattern fills with their patterns as pattern swatches (#1025), gradient and pattern names in the file up to their first newline (a name that another swatch, or a gradient or pattern defined earlier, already has is numbered "Sky 2"; a name without a newline is kept, and when another swatch has it, the pattern's swatch, or a named color sharing a gradient or pattern swatch's name, is numbered the same way), opacity, blend modes, isolation and knockout, embedded images where their matrix puts them, rotated ones too (#2269), with their alpha channel (CMYK images keep their ink amounts, as they do when a `.ai` opens from its PDF part, and an alpha channel that hides part of a CMYK image becomes a grayscale opacity mask), placed (linked) files as linked images in their place, each showing the low-resolution preview the file keeps of it until its file is found or relinked in the Links panel (#1264), with the folder the file keeps relative to the document's, where the link is looked for when its path is gone, guides, and every artboard where it is, with its center mark, cross hairs, video safe areas and video ruler pixel aspect ratio. VectorCraft reads `CropAreaActive`, an `/Int` in the dictionary that holds the artboard array, as the index of the active artboard in that array, and the file opens with that artboard active; without it, or when it names no artboard that opens, the first artboard is active. It also reads the Document Raster Effects Settings (resolution, color model, background, anti-alias, clipping mask, Add Around Object and Preserve Spot Colors), the author from the header's `%%For` (an EPS's own header when the editing data's has none), swatches for the header's `%%CMYKCustomColor` and `%%RGBCustomColor` colors that the document has none of, and `%%TemplateBox` in older files; a setting with a value of another type or out of range keeps its default. Objects on Path groups open live, with their path, their objects in order along it, Pivot and Rotate; one with a dragged spacing or other options opens as a plain group. A gradient with stops in the middle runs its whole ramp across its shape, and a gradient object does not pass its fill to the next path (#1390). An object whose art style is one fill and one stroke at most (solid colours, its own gradient, a variable-width profile) with Drop Shadow, Inner Glow, Outer Glow, Feather, Round Corners, Scribble, Offset Path, Outline Object, Outline Stroke, Convert to Shape, Tweak (only when it moves nothing) or Pucker & Bloat at 0 comes in as itself with them and their saved settings. A path, compound path or group (not a clipping group) whose only effect is Transform (not with copies or Random) or a Free Distort whose corners make a parallelogram comes in as itself with it too, when neither it nor anything in it paints with a gradient or pattern and everything in it is a path, compound path or group with no opacity mask and no effects of its own; Transform that scales, rotates or reflects needs nothing in it to be stroked. Twist as the only effect is read the same way on an unstroked path or compound path whose segments are all straight. One with more, other effects (Zig Zag, a Pucker & Bloat of another amount, a Free Distort with other corners), an effect setting that is not read (an unknown key, a missing or out-of-range value, a Scribble with a color of its own), dashes aligned to corners, a brush other than a Calligraphic or Art one, a Calligraphic brush with settings of its own or an angle that follows the path, or an Art brush other than the ones described next comes in as its drawn look (a group named after it). A path with a Calligraphic brush otherwise comes in as the path, the brush on its stroke at the stroke's weight, which scales the brush (#372), and so does a path with an Art brush, whose weight scales the art across the path, when all of these hold: the brush stretches its art along the path, unflipped, at 100% in Tints; the path's settings are the brush's own, with no entry that isn't read, no variable width and no effects; its stroke isn't a swatch; and the art is paths, compound paths and groups in solid fills, with no strokes, masks or effects, and has some length along the path. A stroke takes the brush the Brushes panel keeps under its name, and one whose name the panel doesn't keep comes in as its drawn look. Type with an Art brush keeps its drawn look under the type. A Calligraphic brush's Pressure, Tilt, Bearing and Rotation come in as those channels (a 6D Art Pen's brushes vary with the pressure, the bearing and the barrel's rotation); its Stylus Wheel varies at random. The file's Calligraphic, Scatter, Art and Bristle brushes replace the default ones in the Brushes panel, in the file's order, also when the file comes in as its PDF part (a brush library has no layers); pattern brushes and brushes it can't read are left out with a note. Type keeps its art style as a live appearance whatever its stack (an Art brush aside), so it can be retyped: each fill and stroke of the style's stack (solid colours, gradients and pattern fills, placed as the drawn look places them) with its own opacity, blend mode and effects, the effects on the whole object, and where the characters paint among them; the effects read are Warp, Offset Path, Outline Object, Outline Stroke, Transform (with copies, Transform Objects, Transform Patterns and Scale Strokes & Effects; not with Random), Free Distort, Pucker & Bloat, Twist, Zig Zag, Tweak (only when it moves nothing, the file holding none of its random outline), Drop Shadow, Inner Glow, Outer Glow, Feather, Round Corners, Scribble, Gaussian Blur, Bas Relief (its settings at their defaults) and Convert to Shape, and a style with others, or with an effect setting that isn't read, keeps the type's drawn look. Convert to Shape keeps its Rectangle, Rounded Rectangle or Ellipse, its Absolute or Relative size (a relative size in the file is added to each side) and its corner radius; a relative Ellipse, or a setting that isn't read, keeps the drawn look. The page's drawing of such a style isn't held to look like VectorCraft's where its drawn look lay. Gradients take their matrix (`Xm`, radials and skewed ones too), focal point and the order of stops sharing a ramp point; gradient meshes, a clipping path's own fill and its stroke, and the artboards' names are read too. `editingData: "always"` (`convert --editing-data`) opens a `.ai` or an Illustrator EPS from its editing data even where it draws differently from its page, which can be older, with a note. Type is made from the file's text document, whole and editable, shown or not: point type (its frame's matrix, which newer files leave out when it is neither turned nor scaled, read as none), area type (a story in several frames as threaded type) and type on a path, with its characters, fonts, size, leading, tracking, scaling, baseline shift, fill and stroke (grey, RGB or CMYK), alignment, indents and paragraph spacing (a character attribute a run doesn't set comes from its character style, then the style that one is based on, then the document's defaults); area type keeps its frame's Area Type Options rows and columns, the gutter between rows and the gutter between columns, and its first baseline (Fixed, Cap Height, Leading or x Height) with its minimum; type on a path keeps its frame's Type on a Path effect, Align to Path and Flip (a frame whose options set key 6 to true keeps their defaults), and the first frame's Spacing is fitted from the file's layout, not read from the dialog's value; the distance from the path under Align to Path comes from VectorCraft's font metrics, and on Arial at 24 pt it differs from the distance the file keeps by 1.1 pt (Ascender), 0.3 pt (Center) and 2.7 pt (Descender); the fit under Gravity does not reproduce the file's layout, and its glyphs can lie up to 7.4 pt from the positions the file keeps; the page's drawing of it (often in pieces) is left out. Vertical type keeps its orientation, its columns from right to left, and a run set to Tate-chu-yoko keeps that setting. When it makes the type of every text object that shows, the page's type is only compared with it, each text object keeps its own group, frame and layer, and a line break inside a paragraph stays one. Where it can't make a text object's type (a frame of another kind), that text object takes the page's type where the text document puts its lines, or else what is left of the page's type in painting order (no group around it); the page's type where made type draws stays that type's, and hidden type is left out with a note. Text wrap is read too: an object whose dictionary has the wrap options (offset and Invert Wrap), or any graphic of a legacy wraparound group (`*w` … `*W`, before or after its type, with no offset), is a wrap object, and area type below it in its layer flows around it when the file opens, threaded type included (#2763). Kerning, underline and the other character and paragraph options aren't read yet. A `.ai` saved without PDF compatibility (a placeholder page) opens from its editing data alone, its point type, area type and type on a path made from the text document. A `.ai` whose PDF part shows only text isn't taken for that placeholder when its page states an art, trim or bleed box: it opens from its editing data alone where that reads, else from its PDF part (#1387). A `.ai` whose PDF part draws nothing at all (an empty page, with or without those boxes) opens from its editing data alone where that reads too: there is no page art to check its layers against, and the empty page would lose all of it. Text objects with an appearance keep their own text and frame, type of hidden layers stays hidden, and type on later artboards lands on its text objects (#1391); area type whose frame is too short for a line of the fallback font shows its first line (the frame is made taller, with a warning in the open result) (#1392). Symbols are read into the Symbols panel, in the file's symbol list order, with their art, their registration point and the instances in their art, and their instances come in live with their matrix, name, hide, lock, opacity, blending mode, isolation, knockout and opacity mask; a symbol whose art isn't read whole (type, placed files, an image it leaves out or anything else it doesn't read) isn't kept. Symbols are read only with the layers: a file that comes in as its page or PDF part (editing data with no layers, layers that can't be read, or any of the cases below) opens with an empty Symbols panel. Instances of symbols it can't read, instances with appearance changes of their own (a dynamic symbol's), pattern fills whose pattern it can't read, placed files the data keeps no preview of and anything else it doesn't read make the file come in as its page (on a layer that doesn't show, they are left out of that layer), with a warning saying what. An unread object on a shown layer whose box can be found instead comes in as a group of the page's objects inside that box, named after it, with the rest of the layers and groups kept and a warning listing what came in as the page's art; the file still comes in as its page when live art or another unread object shares that page art, when the object spans two artboards or lies on an artboard that has no page, when no page art lies inside its box, when that page art is inside a page group with a clip, mask, transparency or appearance, when the object holds a frame of threaded type, when the page art uses a pattern, image or swatch that the page lacks or that differs from the editing data's, or when the page art doesn't carry its transparency (#4806). The layers' art is also compared with the page (by lightness, so colours written as their CMYK equivalents compare alike, and by whether a pixel is inked at all); the page is used when they differ by more than 5% (away from type, when all the type is made from the text document), where one draws an object the other doesn't (away from type, whose lines may be laid out afresh), and when an EPS whose page is its art's box has art printed outside it (#735). A `.ai` is not compared with its page, and its PDF part is not imported, when its text document makes the type of every text object (at least one shows, and none is drawn by the appearance of the layer or group it is in), no object is unread, no placed file has a second placement, no live envelope keeps its drawn art, it declares no large canvas, and its artboards are its pages' trim boxes one for one, in points or in the first page's `UserUnit`: it opens from its layers, with the bleed of its pages' bleed boxes. When they differ because some objects draw differently (an object in another color, or one that only one of them draws), each top-level object of the layers that holds such a difference comes in as a group of the page's objects inside its box and the layers stay, with a warning that names the layer or sublayer of each such object as the Layers panel shows it (`<Layer>` for one without a name) and how many came in from it; an export or Save As to the file's own path then needs `acknowledgeLoss: true`, and a wrap object replaced this way keeps its wrap options. The file still comes in as its page when only edges or type differ, when a difference lies outside every top-level object, when more than half of the top-level objects or more than 64 hold one, when such an object is or holds type or holds a wrap object inside a group, when the page's type of a text object that stays lies inside such an object's box, when the page's art can't replace such an object for one of the reasons above for an unread object, when matching the differences to the objects would take too much work, or when the result still differs from the page. `editingData: "always"` keeps the objects as read, and placed files at the other point their data gives are tried as well. An EPS whose page is its art's box keeps that page when it comes in through its layers, not the editing data's artboard, and a text object counts as drawn by the page by its colours, not only its lightness, so a red stroke stacked over a dark red one stays (#1102). `textAs: "outlines"` opens a `.ai` whose type shows from its PDF part, which has the outlines; `editingData: false` opens any of them as its page or PDF part only, for print pipelines (#735). A file whose import left something out (hidden text, art or layers) is never written over by an export or Save As to its own path unless `acknowledgeLoss: true` (`convert --replace-lossy`), so the original keeps what the document lacks. Where a `.ai` can't be read that way (or its layers are turned off in the import options), we read its PDF-compatible part, so Illustrator-only live objects arrive as appearance, and plain groups arrive ungrouped: that part draws each object on its own and marks only layers, clipping groups and groups with opacity, blending or a mask (those come back). Art outside the artboards isn't in that part at all (Illustrator's PDF part leaves it out), so it doesn't open; the import says so in a note (#472). Its pages still go where the editing data puts the artboards (a grid stays a grid), with the art on each, when it has as many artboards as pages, of the same sizes (#1068); the page of the artboard `CropAreaActive` names is then the active artboard. A `.ai` whose editing data has artboards but no layers also opens on that page under the same check, and its pages stay where they are. A `.ai` whose PDF part's pages are cropped to its art (each page the box of all the art, which is the editing data's bounding box) instead of its artboards opens from its layers, with its own artboards, where they draw as that page does. Its pages are laid out so that art one of them draws past its artboard (notes beside a design, which the part doesn't clip) doesn't lie over the page before it in the row, where it was taken for that page's art: the check against the editing data then found art its layers don't have there and opened the file as its PDF part, without the art outside the artboards. That part also has no paragraphs: area type is written line by line, and comes back as area type only where its font is installed and lays the lines out with the same breaks, else as a point type object per line (#508). Art off the page that a PDF does draw opens on the pasteboard.
-the app's own editing copy of a file (an EPS after its `%%EOF`, a `.ai`'s `AIPrivateData` streams, a PDF's `AIPDFPrivateData` streams when it was saved with the editing data (#868), Zstandard or zlib, the EPS's in ASCII85) is not documented as a whole. VectorCraft reads its structure: layers and sublayers (names, order, visibility, lock, printing, preview, dimming, colour), groups as they were nested, compound paths (painted by their last path, or the last painted one, with the paths of groups inside them kept as their paths: #1410), clipping groups and layer clipping (several clipping paths in a clipping group, a layer or an opacity mask's art clip to their intersection, and a compound path of clipping paths stays one clip; clipping paths that would nest the art past the document's 32 levels stop the editing data from being read: #5789), object names, hidden and locked objects, fills and strokes (grey, CMYK, RGB, named and spot colours, spot colours defined in Lab with their Lab values (#1032), global process colours as global swatches at their tint; a stroke of width 0, `0 w`, on a path, a gradient-filled path, legacy type or in an art style comes in as a 0.25 pt hairline, as from PDF: #1671), linear and radial gradients, pattern fills with their patterns as pattern swatches (#1025), gradient and pattern names in the file up to their first newline (a name that another swatch, or a gradient or pattern defined earlier, already has is numbered "Sky 2"; a name without a newline is kept, and when another swatch has it, the pattern's swatch, or a named color sharing a gradient or pattern swatch's name, is numbered the same way), opacity, blend modes, isolation and knockout, embedded images where their matrix puts them, rotated ones too (#2269), with their alpha channel (CMYK images keep their ink amounts, as they do when a `.ai` opens from its PDF part, and an alpha channel that hides part of a CMYK image becomes a grayscale opacity mask), placed (linked) files as linked images in their place, each showing the low-resolution preview the file keeps of it until its file is found or relinked in the Links panel (#1264), with the folder the file keeps relative to the document's, where the link is looked for when its path is gone, guides, and every artboard where it is, with its center mark, cross hairs, video safe areas and video ruler pixel aspect ratio. VectorCraft reads `CropAreaActive`, an `/Int` in the dictionary that holds the artboard array, as the index of the active artboard in that array, and the file opens with that artboard active; without it, or when it names no artboard that opens, the first artboard is active. It also reads the Document Raster Effects Settings (resolution, color model, background, anti-alias, clipping mask, Add Around Object and Preserve Spot Colors), the author from the header's `%%For` (an EPS's own header when the editing data's has none), swatches for the header's `%%CMYKCustomColor` and `%%RGBCustomColor` colors that the document has none of, and `%%TemplateBox` in older files; a setting with a value of another type or out of range keeps its default. Objects on Path groups open live, with their path, their objects in order along it, Pivot and Rotate; one with a dragged spacing or other options opens as a plain group. A gradient with stops in the middle runs its whole ramp across its shape, and a gradient object does not pass its fill to the next path (#1390). An object whose art style is one fill and one stroke at most (solid colours, its own gradient, a variable-width profile) with Drop Shadow, Inner Glow, Outer Glow, Feather, Round Corners, Scribble, Offset Path, Outline Object, Outline Stroke, Convert to Shape, Tweak (only when it moves nothing) or Pucker & Bloat at 0 comes in as itself with them and their saved settings. A path, compound path or group (not a clipping group) whose only effect is Transform (not with copies or Random) or a Free Distort whose corners make a parallelogram comes in as itself with it too, when neither it nor anything in it paints with a gradient or pattern and everything in it is a path, compound path or group with no opacity mask and no effects of its own; Transform that scales, rotates or reflects needs nothing in it to be stroked. Twist as the only effect is read the same way on an unstroked path or compound path whose segments are all straight. One with more, other effects (Zig Zag, a Pucker & Bloat of another amount, a Free Distort with other corners), an effect setting that is not read (an unknown key, a missing or out-of-range value, a Scribble with a color of its own), dashes aligned to corners, a brush other than a Calligraphic one, or a Calligraphic brush with settings of its own or an angle that follows the path comes in as its drawn look (a group named after it). A path with a Calligraphic brush otherwise comes in as the path, the brush on its stroke at the stroke's weight, which scales the brush (#372). A Calligraphic brush's Pressure, Tilt, Bearing and Rotation come in as those channels (a 6D Art Pen's brushes vary with the pressure, the bearing and the barrel's rotation); its Stylus Wheel varies at random. The file's Calligraphic, Scatter, Art and Bristle brushes replace the default ones in the Brushes panel, in the file's order, also when the file comes in as its PDF part (a brush library has no layers); pattern brushes and brushes it can't read are left out with a note. Type keeps its art style as a live appearance whatever its stack, so it can be retyped: each fill and stroke of the style's stack (solid colours, gradients and pattern fills, placed as the drawn look places them) with its own opacity, blend mode and effects, the effects on the whole object, and where the characters paint among them; the effects read are Warp, Offset Path, Outline Object, Outline Stroke, Transform (with copies, Transform Objects, Transform Patterns and Scale Strokes & Effects; not with Random), Free Distort, Pucker & Bloat, Twist, Zig Zag, Tweak (only when it moves nothing, the file holding none of its random outline), Drop Shadow, Inner Glow, Outer Glow, Feather, Round Corners, Scribble, Gaussian Blur, Bas Relief (its settings at their defaults) and Convert to Shape, and a style with others, or with an effect setting that isn't read, keeps the type's drawn look. Convert to Shape keeps its Rectangle, Rounded Rectangle or Ellipse, its Absolute or Relative size (a relative size in the file is added to each side) and its corner radius; a relative Ellipse, or a setting that isn't read, keeps the drawn look. The page's drawing of such a style isn't held to look like VectorCraft's where its drawn look lay. Gradients take their matrix (`Xm`, radials and skewed ones too), focal point and the order of stops sharing a ramp point; gradient meshes, a clipping path's own fill and its stroke, and the artboards' names are read too. `editingData: "always"` (`convert --editing-data`) opens a `.ai` or an Illustrator EPS from its editing data even where it draws differently from its page, which can be older, with a note. Type is made from the file's text document, whole and editable, shown or not: point type (its frame's matrix, which newer files leave out when it is neither turned nor scaled, read as none), area type (a story in several frames as threaded type) and type on a path, with its characters, fonts, size, leading, tracking, scaling, baseline shift, fill and stroke (grey, RGB or CMYK), alignment, indents and paragraph spacing (a character attribute a run doesn't set comes from its character style, then the style that one is based on, then the document's defaults); area type keeps its frame's Area Type Options rows and columns, the gutter between rows and the gutter between columns, and its first baseline (Fixed, Cap Height, Leading or x Height) with its minimum; type on a path keeps its frame's Type on a Path effect, Align to Path and Flip, and the first frame's Spacing is fitted from the file's layout, not read from the dialog's value; the distance from the path under Align to Path comes from VectorCraft's font metrics, and on Arial at 24 pt it differs from the distance the file keeps by 1.1 pt (Ascender), 0.3 pt (Center) and 2.7 pt (Descender); the fit under Gravity does not reproduce the file's layout, and its glyphs can lie up to 7.4 pt from the positions the file keeps; the page's drawing of it (often in pieces) is left out. Vertical type keeps its orientation, its columns from right to left, and a run set to Tate-chu-yoko keeps that setting. When it makes the type of every text object that shows, the page's type is only compared with it, each text object keeps its own group, frame and layer, and a line break inside a paragraph stays one. Where it can't make a text object's type (a frame of another kind), that text object takes the page's type where the text document puts its lines, or else what is left of the page's type in painting order (no group around it); the page's type where made type draws stays that type's, and hidden type is left out with a note. Text wrap is read too: an object whose dictionary has the wrap options (offset and Invert Wrap), or any graphic of a legacy wraparound group (`*w` … `*W`, before or after its type, with no offset), is a wrap object, and area type below it in its layer flows around it when the file opens, threaded type included (#2763). Kerning, underline and the other character and paragraph options aren't read yet. A `.ai` saved without PDF compatibility (a placeholder page) opens from its editing data alone, its point type, area type and type on a path made from the text document. A `.ai` whose PDF part shows only text isn't taken for that placeholder when its page states an art, trim or bleed box: it opens from its editing data alone where that reads, else from its PDF part (#1387). A `.ai` whose PDF part draws nothing at all (an empty page, with or without those boxes) opens from its editing data alone where that reads too: there is no page art to check its layers against, and the empty page would lose all of it. Text objects with an appearance keep their own text and frame, type of hidden layers stays hidden, and type on later artboards lands on its text objects (#1391); area type whose frame is too short for a line of the fallback font shows its first line (the frame is made taller, with a warning in the open result) (#1392). Symbols are read into the Symbols panel, in the file's symbol list order, with their art, their registration point and the instances in their art, and their instances come in live with their matrix, name, hide, lock, opacity, blending mode, isolation, knockout and opacity mask; a symbol whose art isn't read whole (type, placed files, an image it leaves out or anything else it doesn't read) isn't kept. Symbols are read only with the layers: a file that comes in as its page or PDF part (editing data with no layers, layers that can't be read, or any of the cases below) opens with an empty Symbols panel. Instances of symbols it can't read, instances with appearance changes of their own (a dynamic symbol's), pattern fills whose pattern it can't read, placed files the data keeps no preview of and anything else it doesn't read make the file come in as its page (on a layer that doesn't show, they are left out of that layer), with a warning saying what. An unread object on a shown layer whose box can be found instead comes in as a group of the page's objects inside that box, named after it, with the rest of the layers and groups kept and a warning listing what came in as the page's art; the file still comes in as its page when live art or another unread object shares that page art, when the object spans two artboards or lies on an artboard that has no page, when no page art lies inside its box, when that page art is inside a page group with a clip, mask, transparency or appearance, when the object holds a frame of threaded type, when the page art uses a pattern, image or swatch that the page lacks or that differs from the editing data's, or when the page art doesn't carry its transparency (#4806). The layers' art is also compared with the page (by lightness, so colours written as their CMYK equivalents compare alike, and by whether a pixel is inked at all); the page is used when they differ by more than 5% (away from type, when all the type is made from the text document), where one draws an object the other doesn't (away from type, whose lines may be laid out afresh), and when an EPS whose page is its art's box has art printed outside it (#735). A `.ai` is not compared with its page, and its PDF part is not imported, when its text document makes the type of every text object (at least one shows, and none is drawn by the appearance of the layer or group it is in), no object is unread, no placed file has a second placement, no live envelope keeps its drawn art, it declares no large canvas, and its artboards are its pages' trim boxes one for one, in points or in the first page's `UserUnit`: it opens from its layers, with the bleed of its pages' bleed boxes. When they differ because some objects draw differently (an object in another color, or one that only one of them draws), each top-level object of the layers that holds such a difference comes in as a group of the page's objects inside its box and the layers stay, with a warning that names the layer or sublayer of each such object as the Layers panel shows it (`<Layer>` for one without a name) and how many came in from it; an export or Save As to the file's own path then needs `acknowledgeLoss: true`, and a wrap object replaced this way keeps its wrap options. The file still comes in as its page when only edges or type differ, when a difference lies outside every top-level object, when more than half of the top-level objects or more than 64 hold one, when such an object is or holds type or holds a wrap object inside a group, when the page's type of a text object that stays lies inside such an object's box, when the page's art can't replace such an object for one of the reasons above for an unread object, when matching the differences to the objects would take too much work, or when the result still differs from the page. `editingData: "always"` keeps the objects as read, and placed files at the other point their data gives are tried as well. An EPS whose page is its art's box keeps that page when it comes in through its layers, not the editing data's artboard, and a text object counts as drawn by the page by its colours, not only its lightness, so a red stroke stacked over a dark red one stays (#1102). `textAs: "outlines"` opens a `.ai` whose type shows from its PDF part, which has the outlines; `editingData: false` opens any of them as its page or PDF part only, for print pipelines (#735). A file whose import left something out (hidden text, art or layers) is never written over by an export or Save As to its own path unless `acknowledgeLoss: true` (`convert --replace-lossy`), so the original keeps what the document lacks. Where a `.ai` can't be read that way (or its layers are turned off in the import options), we read its PDF-compatible part, so Illustrator-only live objects arrive as appearance, and plain groups arrive ungrouped: that part draws each object on its own and marks only layers, clipping groups and groups with opacity, blending or a mask (those come back). Art outside the artboards isn't in that part at all (Illustrator's PDF part leaves it out), so it doesn't open; the import says so in a note (#472). Its pages still go where the editing data puts the artboards (a grid stays a grid), with the art on each, when it has as many artboards as pages, of the same sizes (#1068); the page of the artboard `CropAreaActive` names is then the active artboard. A `.ai` whose editing data has artboards but no layers also opens on that page under the same check, and its pages stay where they are. A `.ai` whose PDF part's pages are cropped to its art (each page the box of all the art, which is the editing data's bounding box) instead of its artboards opens from its layers, with its own artboards, where they draw as that page does. Its pages are laid out so that art one of them draws past its artboard (notes beside a design, which the part doesn't clip) doesn't lie over the page before it in the row, where it was taken for that page's art: the check against the editing data then found art its layers don't have there and opened the file as its PDF part, without the art outside the artboards. That part also has no paragraphs: area type is written line by line, and comes back as area type only where its font is installed and lays the lines out with the same breaks, else as a point type object per line (#508). Art off the page that a PDF does draw opens on the pasteboard.
+the app's own editing copy of a file (an EPS after its `%%EOF`, a `.ai`'s `AIPrivateData` streams, a PDF's `AIPDFPrivateData` streams when it was saved with the editing data (#868), Zstandard or zlib, the EPS's in ASCII85) is not documented as a whole. VectorCraft reads its structure: layers and sublayers (names, order, visibility, lock, printing, preview, dimming, colour), groups as they were nested, compound paths (painted by their last path, or the last painted one, with the paths of groups inside them kept as their paths: #1410), clipping groups and layer clipping (several clipping paths in a clipping group, a layer or an opacity mask's art clip to their intersection, and a compound path of clipping paths stays one clip; clipping paths that would nest the art past the document's 32 levels stop the editing data from being read: #5789), object names, hidden and locked objects, fills and strokes (grey, CMYK, RGB, named and spot colours, spot colours defined in Lab with their Lab values (#1032), global process colours as global swatches at their tint; a stroke of width 0, `0 w`, on a path, a gradient-filled path, legacy type or in an art style comes in as a 0.25 pt hairline, as from PDF: #1671), linear and radial gradients, pattern fills with their patterns as pattern swatches (#1025), gradient and pattern names in the file up to their first newline (a name that another swatch, or a gradient or pattern defined earlier, already has is numbered "Sky 2"; a name without a newline is kept, and when another swatch has it, the pattern's swatch, or a named color sharing a gradient or pattern swatch's name, is numbered the same way), opacity, blend modes, isolation and knockout, embedded images where their matrix puts them, rotated ones too (#2269), with their alpha channel (CMYK images keep their ink amounts, as they do when a `.ai` opens from its PDF part, and an alpha channel that hides part of a CMYK image becomes a grayscale opacity mask), placed (linked) files as linked images in their place, each showing the low-resolution preview the file keeps of it until its file is found or relinked in the Links panel (#1264), with the folder the file keeps relative to the document's, where the link is looked for when its path is gone, guides, and every artboard where it is, with its center mark, cross hairs, video safe areas and video ruler pixel aspect ratio. VectorCraft reads `CropAreaActive`, an `/Int` in the dictionary that holds the artboard array, as the index of the active artboard in that array, and the file opens with that artboard active; without it, or when it names no artboard that opens, the first artboard is active. It also reads the Document Raster Effects Settings (resolution, color model, background, anti-alias, clipping mask, Add Around Object and Preserve Spot Colors), the author from the header's `%%For` (an EPS's own header when the editing data's has none), swatches for the header's `%%CMYKCustomColor` and `%%RGBCustomColor` colors that the document has none of, and `%%TemplateBox` in older files; a setting with a value of another type or out of range keeps its default. Objects on Path groups open live, with their path, their objects in order along it, Pivot and Rotate; one with a dragged spacing or other options opens as a plain group. A gradient with stops in the middle runs its whole ramp across its shape, and a gradient object does not pass its fill to the next path (#1390). An object whose art style is one fill and one stroke at most (solid colours, its own gradient, a variable-width profile) with Drop Shadow, Inner Glow, Outer Glow, Feather, Round Corners, Scribble, Offset Path, Outline Object, Outline Stroke, Convert to Shape, Tweak (only when it moves nothing) or Pucker & Bloat at 0 comes in as itself with them and their saved settings. A path, compound path or group (not a clipping group) whose only effect is Transform (not with copies or Random) or a Free Distort whose corners make a parallelogram comes in as itself with it too, when neither it nor anything in it paints with a gradient or pattern and everything in it is a path, compound path or group with no opacity mask and no effects of its own; Transform that scales, rotates or reflects needs nothing in it to be stroked. Twist as the only effect is read the same way on an unstroked path or compound path whose segments are all straight. One with more, other effects (Zig Zag, a Pucker & Bloat of another amount, a Free Distort with other corners), an effect setting that is not read (an unknown key, a missing or out-of-range value, a Scribble with a color of its own), dashes aligned to corners, a brush other than a Calligraphic one, or a Calligraphic brush with settings of its own or an angle that follows the path comes in as its drawn look (a group named after it). Objects in a symbol defined before the file's art styles section, as newer files write it, take the same styles as the layers' objects. A path with a Calligraphic brush otherwise comes in as the path, the brush on its stroke at the stroke's weight, which scales the brush (#372). A Calligraphic brush's Pressure, Tilt, Bearing and Rotation come in as those channels (a 6D Art Pen's brushes vary with the pressure, the bearing and the barrel's rotation); its Stylus Wheel varies at random. The file's Calligraphic, Scatter, Art and Bristle brushes replace the default ones in the Brushes panel, in the file's order, also when the file comes in as its PDF part (a brush library has no layers); pattern brushes and brushes it can't read are left out with a note. Type keeps its art style as a live appearance whatever its stack, so it can be retyped: each fill and stroke of the style's stack (solid colours, gradients and pattern fills, placed as the drawn look places them) with its own opacity, blend mode and effects, the effects on the whole object, and where the characters paint among them; the effects read are Warp, Offset Path, Outline Object, Outline Stroke, Transform (with copies, Transform Objects, Transform Patterns and Scale Strokes & Effects; not with Random), Free Distort, Pucker & Bloat, Twist, Zig Zag, Tweak (only when it moves nothing, the file holding none of its random outline), Drop Shadow, Inner Glow, Outer Glow, Feather, Round Corners, Scribble, Gaussian Blur, Bas Relief (its settings at their defaults) and Convert to Shape, and a style with others, or with an effect setting that isn't read, keeps the type's drawn look. Convert to Shape keeps its Rectangle, Rounded Rectangle or Ellipse, its Absolute or Relative size (a relative size in the file is added to each side) and its corner radius; a relative Ellipse, or a setting that isn't read, keeps the drawn look. The page's drawing of such a style isn't held to look like VectorCraft's where its drawn look lay. Gradients take their matrix (`Xm`, radials and skewed ones too), focal point and the order of stops sharing a ramp point; gradient meshes, a clipping path's own fill and its stroke, and the artboards' names are read too. `editingData: "always"` (`convert --editing-data`) opens a `.ai` or an Illustrator EPS from its editing data even where it draws differently from its page, which can be older, with a note. Type is made from the file's text document, whole and editable, shown or not: point type (its frame's matrix, which newer files leave out when it is neither turned nor scaled, read as none), area type (a story in several frames as threaded type) and type on a path, with its characters, fonts, size, leading, tracking, scaling, baseline shift, fill and stroke (grey, RGB or CMYK), alignment, indents and paragraph spacing (a character attribute a run doesn't set comes from its character style, then the style that one is based on, then the document's defaults); area type keeps its frame's Area Type Options rows and columns, the gutter between rows and the gutter between columns, and its first baseline (Fixed, Cap Height, Leading or x Height) with its minimum; type on a path keeps its frame's Type on a Path effect, Align to Path and Flip (a frame whose options set key 6 to true keeps their defaults), and the first frame's Spacing is fitted from the file's layout, not read from the dialog's value; the distance from the path under Align to Path is measured for each character at its size and vertical scale (in vertical type, its horizontal scale), from the top of its font's em box (Ascender), half the height of the top of its font's H (Center) or the bottom of its font's bounding box (Descender); the fit under Gravity does not reproduce the file's layout, and its glyphs can lie up to 7.4 pt from the positions the file keeps; the page's drawing of it (often in pieces) is left out. Vertical type keeps its orientation, its columns from right to left, and a run set to Tate-chu-yoko keeps that setting. When it makes the type of every text object that shows, the page's type is only compared with it, each text object keeps its own group, frame and layer, and a line break inside a paragraph stays one. Where it can't make a text object's type (a frame of another kind), that text object takes the page's type where the text document puts its lines, or else what is left of the page's type in painting order (no group around it); the page's type where made type draws stays that type's, and hidden type is left out with a note. Text wrap is read too: an object whose dictionary has the wrap options (offset and Invert Wrap), or any graphic of a legacy wraparound group (`*w` … `*W`, before or after its type, with no offset), is a wrap object, and area type below it in its layer flows around it when the file opens, threaded type included (#2763). Kerning, underline and the other character and paragraph options aren't read yet. A `.ai` saved without PDF compatibility (a placeholder page) opens from its editing data alone, its point type, area type and type on a path made from the text document. A `.ai` whose PDF part shows only text isn't taken for that placeholder when its page states an art, trim or bleed box: it opens from its editing data alone where that reads, else from its PDF part (#1387). A `.ai` whose PDF part draws nothing at all (an empty page, with or without those boxes) opens from its editing data alone where that reads too: there is no page art to check its layers against, and the empty page would lose all of it. Text objects with an appearance keep their own text and frame, type of hidden layers stays hidden, and type on later artboards lands on its text objects (#1391); area type whose frame is too short for a line of the fallback font shows its first line (the frame is made taller, with a warning in the open result) (#1392). Symbols are read into the Symbols panel, in the file's symbol list order, with their art, their registration point and the instances in their art, and their instances come in live with their matrix, name, hide, lock, opacity, blending mode, isolation, knockout and opacity mask; a symbol whose art isn't read whole (type, placed files, an image it leaves out or anything else it doesn't read) isn't kept. Symbols are read only with the layers: a file that comes in as its page or PDF part (editing data with no layers, layers that can't be read, or any of the cases below) opens with an empty Symbols panel. Instances of symbols it can't read, instances with appearance changes of their own (a dynamic symbol's), pattern fills whose pattern it can't read, placed files the data keeps no preview of and anything else it doesn't read make the file come in as its page (on a layer that doesn't show, they are left out of that layer), with a warning saying what. An unread object on a shown layer whose box can be found instead comes in as a group of the page's objects inside that box, named after it, with the rest of the layers and groups kept and a warning listing what came in as the page's art; the file still comes in as its page when live art or another unread object shares that page art, when the object spans two artboards or lies on an artboard that has no page, when no page art lies inside its box, when that page art is inside a page group with a clip, mask, transparency or appearance, when the object holds a frame of threaded type, when the page art uses a pattern, image or swatch that the page lacks or that differs from the editing data's, or when the page art doesn't carry its transparency (#4806). The layers' art is also compared with the page (by lightness, so colours written as their CMYK equivalents compare alike, and by whether a pixel is inked at all); the page is used when they differ by more than 5% (away from type, when all the type is made from the text document), where one draws an object the other doesn't (away from type, whose lines may be laid out afresh), and when an EPS whose page is its art's box has art printed outside it (#735). A `.ai` is not compared with its page, and its PDF part is not imported, when its text document makes the type of every text object (at least one shows, and none is drawn by the appearance of the layer or group it is in), no object is unread, no placed file has a second placement, no live envelope keeps its drawn art, it declares no large canvas, and its artboards are its pages' trim boxes one for one, in points or in the first page's `UserUnit`: it opens from its layers, with the bleed of its pages' bleed boxes. When they differ because some objects draw differently (an object in another color, or one that only one of them draws), each top-level object of the layers that holds such a difference comes in as a group of the page's objects inside its box and the layers stay, with a warning that names the layer or sublayer of each such object as the Layers panel shows it (`<Layer>` for one without a name) and how many came in from it; an export or Save As to the file's own path then needs `acknowledgeLoss: true`, and a wrap object replaced this way keeps its wrap options. The file still comes in as its page when only edges or type differ, when a difference lies outside every top-level object, when more than half of the top-level objects or more than 64 hold one, when such an object is or holds type or holds a wrap object inside a group, when the page's type of a text object that stays lies inside such an object's box, when the page's art can't replace such an object for one of the reasons above for an unread object, when matching the differences to the objects would take too much work, or when the result still differs from the page. `editingData: "always"` keeps the objects as read, and placed files at the other point their data gives are tried as well. An EPS whose page is its art's box keeps that page when it comes in through its layers, not the editing data's artboard, and a text object counts as drawn by the page by its colours, not only its lightness, so a red stroke stacked over a dark red one stays (#1102). `textAs: "outlines"` opens a `.ai` whose type shows from its PDF part, which has the outlines; `editingData: false` opens any of them as its page or PDF part only, for print pipelines (#735). A file whose import left something out (hidden text, art or layers) is never written over by an export or Save As to its own path unless `acknowledgeLoss: true` (`convert --replace-lossy`), so the original keeps what the document lacks. Where a `.ai` can't be read that way (or its layers are turned off in the import options), we read its PDF-compatible part, so Illustrator-only live objects arrive as appearance, and plain groups arrive ungrouped: that part draws each object on its own and marks only layers, clipping groups and groups with opacity, blending or a mask (those come back). Art outside the artboards isn't in that part at all (Illustrator's PDF part leaves it out), so it doesn't open; the import says so in a note (#472). Its pages still go where the editing data puts the artboards (a grid stays a grid), with the art on each, when it has as many artboards as pages, of the same sizes (#1068); the page of the artboard `CropAreaActive` names is then the active artboard. A `.ai` whose editing data has artboards but no layers also opens on that page under the same check, and its pages stay where they are. A `.ai` whose PDF part's pages are cropped to its art (each page the box of all the art, which is the editing data's bounding box) instead of its artboards opens from its layers, with its own artboards, where they draw as that page does. Its pages are laid out so that art one of them draws past its artboard (notes beside a design, which the part doesn't clip) doesn't lie over the page before it in the row, where it was taken for that page's art: the check against the editing data then found art its layers don't have there and opened the file as its PDF part, without the art outside the artboards. That part also has no paragraphs: area type is written line by line, and comes back as area type only where its font is installed and lays the lines out with the same breaks, else as a point type object per line (#508). Art off the page that a PDF does draw opens on the pasteboard.
+the app's own editing copy of a file (an EPS after its `%%EOF`, a `.ai`'s `AIPrivateData` streams, a PDF's `AIPDFPrivateData` streams when it was saved with the editing data (#868), Zstandard or zlib, the EPS's in ASCII85) is not documented as a whole. VectorCraft reads its structure: layers and sublayers (names, order, visibility, lock, printing, preview, dimming, colour), groups as they were nested, compound paths (painted by their last path, or the last painted one, with the paths of groups inside them kept as their paths: #1410), clipping groups and layer clipping (several clipping paths in a clipping group, a layer or an opacity mask's art clip to their intersection, and a compound path of clipping paths stays one clip; clipping paths that would nest the art past the document's 32 levels stop the editing data from being read: #5789), object names, hidden and locked objects, fills and strokes (grey, CMYK, RGB, named and spot colours, spot colours defined in Lab with their Lab values (#1032), global process colours as global swatches at their tint; a stroke of width 0, `0 w`, on a path, a gradient-filled path, legacy type or in an art style comes in as a 0.25 pt hairline, as from PDF: #1671), linear and radial gradients, pattern fills with their patterns as pattern swatches (#1025), gradient and pattern names in the file up to their first newline (a name that another swatch, or a gradient or pattern defined earlier, already has is numbered "Sky 2"; a name without a newline is kept, and when another swatch has it, the pattern's swatch, or a named color sharing a gradient or pattern swatch's name, is numbered the same way), opacity, blend modes, isolation and knockout, embedded images where their matrix puts them, rotated ones too (#2269), with their alpha channel (CMYK images keep their ink amounts, as they do when a `.ai` opens from its PDF part, and an alpha channel that hides part of a CMYK image becomes a grayscale opacity mask), placed (linked) files as linked images in their place, each showing the low-resolution preview the file keeps of it until its file is found or relinked in the Links panel (#1264), with the folder the file keeps relative to the document's, where the link is looked for when its path is gone, guides, and every artboard where it is, with its center mark, cross hairs, video safe areas and video ruler pixel aspect ratio. VectorCraft reads `CropAreaActive`, an `/Int` in the dictionary that holds the artboard array, as the index of the active artboard in that array, and the file opens with that artboard active; without it, or when it names no artboard that opens, the first artboard is active. It also reads the Document Raster Effects Settings (resolution, color model, background, anti-alias, clipping mask, Add Around Object and Preserve Spot Colors), the author from the header's `%%For` (an EPS's own header when the editing data's has none), swatches for the header's `%%CMYKCustomColor` and `%%RGBCustomColor` colors that the document has none of, and `%%TemplateBox` in older files; a setting with a value of another type or out of range keeps its default. Objects on Path groups open live, with their path, their objects in order along it, Pivot and Rotate; one with a dragged spacing or other options opens as a plain group. A gradient with stops in the middle runs its whole ramp across its shape, and a gradient object does not pass its fill to the next path (#1390). An object whose art style is one fill and one stroke at most (solid colours, its own gradient, a variable-width profile) with Drop Shadow, Inner Glow, Outer Glow, Feather, Round Corners, Scribble, Offset Path, Outline Object, Outline Stroke, Convert to Shape, Tweak (only when it moves nothing) or Pucker & Bloat at 0 comes in as itself with them and their saved settings. A path, compound path or group (not a clipping group) whose only effect is Transform (not with copies or Random) or a Free Distort whose corners make a parallelogram comes in as itself with it too, when neither it nor anything in it paints with a gradient or pattern and everything in it is a path, compound path or group with no opacity mask and no effects of its own; Transform that scales, rotates or reflects needs nothing in it to be stroked. Twist as the only effect is read the same way on an unstroked path or compound path whose segments are all straight. One with more, other effects (Zig Zag, a Pucker & Bloat of another amount, a Free Distort with other corners), an effect setting that is not read (an unknown key, a missing or out-of-range value, a Scribble with a color of its own), dashes aligned to corners, a brush other than a Calligraphic or Art one, a Calligraphic brush with settings of its own or an angle that follows the path, or an Art brush other than the ones described next comes in as its drawn look (a group named after it). A path with a Calligraphic brush otherwise comes in as the path, the brush on its stroke at the stroke's weight, which scales the brush (#372), and so does a path with an Art brush, whose weight scales the art across the path, when all of these hold: the brush stretches its art along the path, unflipped, at 100% in Tints; the path's settings are the brush's own, with no entry that isn't read, no variable width and no effects; its stroke isn't a swatch; and the art is paths, compound paths and groups in solid fills, with no strokes, masks or effects, and has some length along the path. A stroke takes the brush the Brushes panel keeps under its name, and one whose name the panel doesn't keep comes in as its drawn look. Type with an Art brush keeps its drawn look under the type. A Calligraphic brush's Pressure, Tilt, Bearing and Rotation come in as those channels (a 6D Art Pen's brushes vary with the pressure, the bearing and the barrel's rotation); its Stylus Wheel varies at random. The file's Calligraphic, Scatter, Art and Bristle brushes replace the default ones in the Brushes panel, in the file's order, also when the file comes in as its PDF part (a brush library has no layers); pattern brushes and brushes it can't read are left out with a note. Type keeps its art style as a live appearance whatever its stack (an Art brush aside), so it can be retyped: each fill and stroke of the style's stack (solid colours, gradients and pattern fills, placed as the drawn look places them) with its own opacity, blend mode and effects, the effects on the whole object, and where the characters paint among them; the effects read are Warp, Offset Path, Outline Object, Outline Stroke, Transform (with copies, Transform Objects, Transform Patterns and Scale Strokes & Effects; not with Random), Free Distort, Pucker & Bloat, Twist, Zig Zag, Tweak (only when it moves nothing, the file holding none of its random outline), Drop Shadow, Inner Glow, Outer Glow, Feather, Round Corners, Scribble, Gaussian Blur, Bas Relief (its settings at their defaults) and Convert to Shape, and a style with others, or with an effect setting that isn't read, keeps the type's drawn look. Convert to Shape keeps its Rectangle, Rounded Rectangle or Ellipse, its Absolute or Relative size (a relative size in the file is added to each side) and its corner radius; a relative Ellipse, or a setting that isn't read, keeps the drawn look. The page's drawing of such a style isn't held to look like VectorCraft's where its drawn look lay. Gradients take their matrix (`Xm`, radials and skewed ones too), focal point and the order of stops sharing a ramp point; gradient meshes, a clipping path's own fill and its stroke, and the artboards' names are read too. `editingData: "always"` (`convert --editing-data`) opens a `.ai` or an Illustrator EPS from its editing data even where it draws differently from its page, which can be older, with a note. Type is made from the file's text document, whole and editable, shown or not: point type (its frame's matrix, which newer files leave out when it is neither turned nor scaled, read as none), area type (a story in several frames as threaded type) and type on a path, with its characters, fonts, size, leading, tracking, scaling, baseline shift, fill and stroke (grey, RGB or CMYK), alignment, indents and paragraph spacing (a character attribute a run doesn't set comes from its character style, then the style that one is based on, then the document's defaults); area type keeps its frame's Area Type Options rows and columns, the gutter between rows and the gutter between columns, and its first baseline (Fixed, Cap Height, Leading or x Height) with its minimum; type on a path keeps its frame's Type on a Path effect, Align to Path and Flip (a frame whose options set key 6 to true keeps their defaults), and the first frame's Spacing is fitted from the file's layout, not read from the dialog's value; the distance from the path under Align to Path is measured for each character at its size and vertical scale (in vertical type, its horizontal scale), from the top of its font's em box (Ascender), half the height of the top of its font's H (Center) or the bottom of its font's bounding box (Descender); the fit under Gravity does not reproduce the file's layout, and its glyphs can lie up to 7.4 pt from the positions the file keeps; the page's drawing of it (often in pieces) is left out. Vertical type keeps its orientation, its columns from right to left, and a run set to Tate-chu-yoko keeps that setting. When it makes the type of every text object that shows, the page's type is only compared with it, each text object keeps its own group, frame and layer, and a line break inside a paragraph stays one. Where it can't make a text object's type (a frame of another kind), that text object takes the page's type where the text document puts its lines, or else what is left of the page's type in painting order (no group around it); the page's type where made type draws stays that type's, and hidden type is left out with a note. Text wrap is read too: an object whose dictionary has the wrap options (offset and Invert Wrap), or any graphic of a legacy wraparound group (`*w` … `*W`, before or after its type, with no offset), is a wrap object, and area type below it in its layer flows around it when the file opens, threaded type included (#2763). Kerning, underline and the other character and paragraph options aren't read yet. A `.ai` saved without PDF compatibility (a placeholder page) opens from its editing data alone, its point type, area type and type on a path made from the text document. A `.ai` whose PDF part shows only text isn't taken for that placeholder when its page states an art, trim or bleed box: it opens from its editing data alone where that reads, else from its PDF part (#1387). A `.ai` whose PDF part draws nothing at all (an empty page, with or without those boxes) opens from its editing data alone where that reads too: there is no page art to check its layers against, and the empty page would lose all of it. Text objects with an appearance keep their own text and frame, type of hidden layers stays hidden, and type on later artboards lands on its text objects (#1391); area type whose frame is too short for a line of the fallback font shows its first line (the frame is made taller, with a warning in the open result) (#1392). Symbols are read into the Symbols panel, in the file's symbol list order, with their art, their registration point and the instances in their art, and their instances come in live with their matrix, name, hide, lock, opacity, blending mode, isolation, knockout and opacity mask; a symbol whose art isn't read whole (type, placed files, an image it leaves out or anything else it doesn't read) isn't kept. Symbols are read only with the layers: a file that comes in as its page or PDF part (editing data with no layers, layers that can't be read, or any of the cases below) opens with an empty Symbols panel. Instances of symbols it can't read, instances with appearance changes of their own (a dynamic symbol's), pattern fills whose pattern it can't read, placed files the data keeps no preview of and anything else it doesn't read make the file come in as its page (on a layer that doesn't show, they are left out of that layer), with a warning saying what. An unread object on a shown layer whose box can be found instead comes in as a group of the page's objects inside that box, named after it, with the rest of the layers and groups kept and a warning listing what came in as the page's art; the file still comes in as its page when live art or another unread object shares that page art, when the object spans two artboards or lies on an artboard that has no page, when no page art lies inside its box, when that page art is inside a page group with a clip, mask, transparency or appearance, when the object holds a frame of threaded type, when the page art uses a pattern, image or swatch that the page lacks or that differs from the editing data's, or when the page art doesn't carry its transparency (#4806). The layers' art is also compared with the page (by lightness, so colours written as their CMYK equivalents compare alike, and by whether a pixel is inked at all); the page is used when they differ by more than 5% (away from type, when all the type is made from the text document), where one draws an object the other doesn't (away from type, whose lines may be laid out afresh), and when an EPS whose page is its art's box has art printed outside it (#735). A `.ai` is not compared with its page, and its PDF part is not imported, when its text document makes the type of every text object (at least one shows, and none is drawn by the appearance of the layer or group it is in), no object is unread, no placed file has a second placement, no live envelope keeps its drawn art, it declares no large canvas, and its artboards are its pages' trim boxes one for one, in points or in the first page's `UserUnit`: it opens from its layers, with the bleed of its pages' bleed boxes. When they differ because some objects draw differently (an object in another color, or one that only one of them draws), each top-level object of the layers that holds such a difference comes in as a group of the page's objects inside its box and the layers stay, with a warning that names the layer or sublayer of each such object as the Layers panel shows it (`<Layer>` for one without a name) and how many came in from it; an export or Save As to the file's own path then needs `acknowledgeLoss: true`, and a wrap object replaced this way keeps its wrap options. The file still comes in as its page when only edges or type differ, when a difference lies outside every top-level object, when more than half of the top-level objects or more than 64 hold one, when such an object is or holds type or holds a wrap object inside a group, when the page's type of a text object that stays lies inside such an object's box, when the page's art can't replace such an object for one of the reasons above for an unread object, when matching the differences to the objects would take too much work, or when the result still differs from the page. `editingData: "always"` keeps the objects as read, and placed files at the other point their data gives are tried as well. An EPS whose page is its art's box keeps that page when it comes in through its layers, not the editing data's artboard, and a text object counts as drawn by the page by its colours, not only its lightness, so a red stroke stacked over a dark red one stays (#1102). `textAs: "outlines"` opens a `.ai` whose type shows from its PDF part, which has the outlines; `editingData: false` opens any of them as its page or PDF part only, for print pipelines (#735). A file whose import left something out (hidden text, art or layers) is never written over by an export or Save As to its own path unless `acknowledgeLoss: true` (`convert --replace-lossy`), so the original keeps what the document lacks. Where a `.ai` can't be read that way (or its layers are turned off in the import options), we read its PDF-compatible part, so Illustrator-only live objects arrive as appearance, and plain groups arrive ungrouped: that part draws each object on its own and marks only layers, clipping groups and groups with opacity, blending or a mask (those come back). Art outside the artboards isn't in that part at all (Illustrator's PDF part leaves it out), so it doesn't open; the import says so in a note (#472). Its pages still go where the editing data puts the artboards (a grid stays a grid), with the art on each, when it has as many artboards as pages, of the same sizes (#1068); the page of the artboard `CropAreaActive` names is then the active artboard. A `.ai` whose editing data has artboards but no layers also opens on that page under the same check, and its pages stay where they are. A `.ai` whose PDF part's pages are cropped to its art (each page the box of all the art, which is the editing data's bounding box) instead of its artboards opens from its layers, with its own artboards, where they draw as that page does. Its pages are laid out so that art one of them draws past its artboard (notes beside a design, which the part doesn't clip) doesn't lie over the page before it in the row, where it was taken for that page's art: the check against the editing data then found art its layers don't have there and opened the file as its PDF part, without the art outside the artboards. That part also has no paragraphs: area type is written line by line, and comes back as area type only where its font is installed and lays the lines out with the same breaks, else as a point type object per line (#508). Art off the page that a PDF does draw opens on the pasteboard.
+the app's own editing copy of a file (an EPS after its `%%EOF`, a `.ai`'s `AIPrivateData` streams, a PDF's `AIPDFPrivateData` streams when it was saved with the editing data (#868), Zstandard or zlib, the EPS's in ASCII85) is not documented as a whole. VectorCraft reads its structure: layers and sublayers (names, order, visibility, lock, printing, preview, dimming, colour), groups as they were nested, compound paths (painted by their last path, or the last painted one, with the paths of groups inside them kept as their paths: #1410), clipping groups and layer clipping (several clipping paths in a clipping group, a layer or an opacity mask's art clip to their intersection, and a compound path of clipping paths stays one clip; clipping paths that would nest the art past the document's 32 levels stop the editing data from being read: #5789), object names, hidden and locked objects, fills and strokes (grey, CMYK, RGB, named and spot colours, spot colours defined in Lab with their Lab values (#1032), global process colours as global swatches at their tint; a stroke of width 0, `0 w`, on a path, a gradient-filled path, legacy type or in an art style comes in as a 0.25 pt hairline, as from PDF: #1671), linear and radial gradients, pattern fills with their patterns as pattern swatches (#1025), gradient and pattern names in the file up to their first newline (a name that another swatch, or a gradient or pattern defined earlier, already has is numbered "Sky 2"; a name without a newline is kept, and when another swatch has it, the pattern's swatch, or a named color sharing a gradient or pattern swatch's name, is numbered the same way), opacity, blend modes, isolation and knockout, embedded images where their matrix puts them, rotated ones too (#2269), with their alpha channel (CMYK images keep their ink amounts, as they do when a `.ai` opens from its PDF part, and an alpha channel that hides part of a CMYK image becomes a grayscale opacity mask), placed (linked) files as linked images in their place, each showing the low-resolution preview the file keeps of it until its file is found or relinked in the Links panel (#1264), with the folder the file keeps relative to the document's, where the link is looked for when its path is gone, guides, and every artboard where it is, with its center mark, cross hairs, video safe areas and video ruler pixel aspect ratio. VectorCraft reads `CropAreaActive`, an `/Int` in the dictionary that holds the artboard array, as the index of the active artboard in that array, and the file opens with that artboard active; without it, or when it names no artboard that opens, the first artboard is active. It also reads the Document Raster Effects Settings (resolution, color model, background, anti-alias, clipping mask, Add Around Object and Preserve Spot Colors), the author from the header's `%%For` (an EPS's own header when the editing data's has none), swatches for the header's `%%CMYKCustomColor` and `%%RGBCustomColor` colors that the document has none of, and `%%TemplateBox` in older files; a setting with a value of another type or out of range keeps its default. Objects on Path groups open live, with their path, their objects in order along it, Pivot and Rotate; one with a dragged spacing or other options opens as a plain group. A gradient with stops in the middle runs its whole ramp across its shape, and a gradient object does not pass its fill to the next path (#1390). An object whose art style is one fill and one stroke at most (solid colours, its own gradient, a variable-width profile) with Drop Shadow, Inner Glow, Outer Glow, Feather, Round Corners, Scribble, Offset Path, Outline Object, Outline Stroke, Convert to Shape, Tweak (only when it moves nothing) or Pucker & Bloat at 0 comes in as itself with them and their saved settings. A path, compound path or group (not a clipping group) whose only effect is Transform (not with copies or Random) or a Free Distort whose corners make a parallelogram comes in as itself with it too, when neither it nor anything in it paints with a gradient or pattern and everything in it is a path, compound path or group with no opacity mask and no effects of its own; Transform that scales, rotates or reflects needs nothing in it to be stroked. Twist as the only effect is read the same way on an unstroked path or compound path whose segments are all straight. One with more, other effects (Zig Zag, a Pucker & Bloat of another amount, a Free Distort with other corners), an effect setting that is not read (an unknown key, a missing or out-of-range value, a Scribble with a color of its own), dashes aligned to corners, a brush other than a Calligraphic one, or a Calligraphic brush with settings of its own or an angle that follows the path comes in as its drawn look (a group named after it). A path with a Calligraphic brush otherwise comes in as the path, the brush on its stroke at the stroke's weight, which scales the brush (#372). A Calligraphic brush's Pressure, Tilt, Bearing and Rotation come in as those channels (a 6D Art Pen's brushes vary with the pressure, the bearing and the barrel's rotation); its Stylus Wheel varies at random. The file's Calligraphic, Scatter, Art and Bristle brushes replace the default ones in the Brushes panel, in the file's order, also when the file comes in as its PDF part (a brush library has no layers); pattern brushes and brushes it can't read are left out with a note. Type keeps its art style as a live appearance whatever its stack, so it can be retyped: each fill and stroke of the style's stack (solid colours, gradients and pattern fills, placed as the drawn look places them) with its own opacity, blend mode and effects, the effects on the whole object, and where the characters paint among them; the effects read are Warp, Offset Path, Outline Object, Outline Stroke, Transform (with copies, Transform Objects, Transform Patterns and Scale Strokes & Effects; not with Random), Free Distort, Pucker & Bloat, Twist, Zig Zag, Tweak (only when it moves nothing, the file holding none of its random outline), Drop Shadow, Inner Glow, Outer Glow, Feather, Round Corners, Scribble, Gaussian Blur, Bas Relief (its settings at their defaults) and Convert to Shape, and a style with others, or with an effect setting that isn't read, keeps the type's drawn look. Convert to Shape keeps its Rectangle, Rounded Rectangle or Ellipse, its Absolute or Relative size (a relative size in the file is added to each side) and its corner radius; a relative Ellipse, or a setting that isn't read, keeps the drawn look. The page's drawing of such a style isn't held to look like VectorCraft's where its drawn look lay. Gradients take their matrix (`Xm`, radials and skewed ones too), focal point and the order of stops sharing a ramp point; gradient meshes, a clipping path's own fill and its stroke, and the artboards' names are read too. `editingData: "always"` (`convert --editing-data`) opens a `.ai` or an Illustrator EPS from its editing data even where it draws differently from its page, which can be older, with a note. Type is made from the file's text document, whole and editable, shown or not: point type (its frame's matrix, which newer files leave out when it is neither turned nor scaled, read as none), area type (a story in several frames as threaded type) and type on a path, with its characters, fonts, size, leading, tracking, scaling, baseline shift, fill and stroke (grey, RGB or CMYK), alignment, indents and paragraph spacing (a character attribute a run doesn't set comes from its character style, then the style that one is based on, then the document's defaults); area type keeps its frame's Area Type Options rows and columns, the gutter between rows and the gutter between columns, and its first baseline (Fixed, Cap Height, Leading or x Height) with its minimum; type on a path keeps its frame's Type on a Path effect, Align to Path and Flip, and the first frame's Spacing is fitted from the file's layout, not read from the dialog's value; the distance from the path under Align to Path is measured for each character at its size and vertical scale (in vertical type, its horizontal scale), from the top of its font's em box (Ascender), half the height of the top of its font's H (Center) or the bottom of its font's bounding box (Descender); the fit under Gravity does not reproduce the file's layout, and its glyphs can lie up to 7.4 pt from the positions the file keeps; the page's drawing of it (often in pieces) is left out. Vertical type keeps its orientation, its columns from right to left, and a run set to Tate-chu-yoko keeps that setting. When it makes the type of every text object that shows, the page's type is only compared with it, each text object keeps its own group, frame and layer, and a line break inside a paragraph stays one. Where it can't make a text object's type (a frame of another kind), that text object takes the page's type where the text document puts its lines, or else what is left of the page's type in painting order (no group around it); the page's type where made type draws stays that type's, and hidden type is left out with a note. Text wrap is read too: an object whose dictionary has the wrap options (offset and Invert Wrap), or any graphic of a legacy wraparound group (`*w` … `*W`, before or after its type, with no offset), is a wrap object, and area type below it in its layer flows around it when the file opens, threaded type included (#2763). Kerning, underline and the other character and paragraph options aren't read yet. A `.ai` saved without PDF compatibility (a placeholder page) opens from its editing data alone, its point type, area type and type on a path made from the text document. A `.ai` whose PDF part shows only text isn't taken for that placeholder when its page states an art, trim or bleed box: it opens from its editing data alone where that reads, else from its PDF part (#1387). A `.ai` whose PDF part draws nothing at all (an empty page, with or without those boxes) opens from its editing data alone where that reads too: there is no page art to check its layers against, and the empty page would lose all of it. Text objects with an appearance keep their own text and frame, type of hidden layers stays hidden, and type on later artboards lands on its text objects (#1391); area type whose frame is too short for a line of the fallback font shows its first line (the frame is made taller, with a warning in the open result) (#1392). Symbols are read into the Symbols panel, in the file's symbol list order, with their art, their registration point and the instances in their art, and their instances come in live with their matrix, name, hide, lock, opacity, blending mode, isolation, knockout and opacity mask; a symbol whose art isn't read whole (type, placed files, an image it leaves out or anything else it doesn't read) isn't kept. Symbols are read only with the layers: a file that comes in as its page or PDF part (editing data with no layers, layers that can't be read, or any of the cases below) opens with an empty Symbols panel. Instances of symbols it can't read, instances with appearance changes of their own (a dynamic symbol's), pattern fills whose pattern it can't read, placed files the data keeps no preview of and anything else it doesn't read make the file come in as its page (on a layer that doesn't show, they are left out of that layer), with a warning saying what. An unread object on a shown layer whose box can be found instead comes in as a group of the page's objects inside that box, named after it, with the rest of the layers and groups kept and a warning listing what came in as the page's art; the file still comes in as its page when live art or another unread object shares that page art, when the object spans two artboards or lies on an artboard that has no page, when no page art lies inside its box, when that page art is inside a page group with a clip, mask, transparency or appearance, when the object holds a frame of threaded type, when the page art uses a pattern, image or swatch that the page lacks or that differs from the editing data's, or when the page art doesn't carry its transparency (#4806). The layers' art is also compared with the page (by lightness, so colours written as their CMYK equivalents compare alike, and by whether a pixel is inked at all); the page is used when they differ by more than 5% (away from type, when all the type is made from the text document), where one draws an object the other doesn't (away from type, whose lines may be laid out afresh), and when an EPS whose page is its art's box has art printed outside it (#735). A `.ai` is not compared with its page, and its PDF part is not imported, when its text document makes the type of every text object (at least one shows, and none is drawn by the appearance of the layer or group it is in), no object is unread, no placed file has a second placement, no live envelope keeps its drawn art, it declares no large canvas, and its artboards are its pages' trim boxes one for one, in points or in the first page's `UserUnit`: it opens from its layers, with the bleed of its pages' bleed boxes. When they differ because some objects draw differently (an object in another color, or one that only one of them draws), each top-level object of the layers that holds such a difference comes in as a group of the page's objects inside its box and the layers stay, with a warning that names the layer or sublayer of each such object as the Layers panel shows it (`<Layer>` for one without a name) and how many came in from it; an export or Save As to the file's own path then needs `acknowledgeLoss: true`, and a wrap object replaced this way keeps its wrap options. The file still comes in as its page when only edges or type differ, when a difference lies outside every top-level object, when more than half of the top-level objects or more than 64 hold one, when such an object is or holds type or holds a wrap object inside a group, when the page's type of a text object that stays lies inside such an object's box, when the page's art can't replace such an object for one of the reasons above for an unread object, when matching the differences to the objects would take too much work, or when the result still differs from the page. `editingData: "always"` keeps the objects as read, and placed files at the other point their data gives are tried as well. An EPS whose page is its art's box keeps that page when it comes in through its layers, not the editing data's artboard, and a text object counts as drawn by the page by its colours, not only its lightness, so a red stroke stacked over a dark red one stays (#1102). `textAs: "outlines"` opens a `.ai` whose type shows from its PDF part, which has the outlines; `editingData: false` opens any of them as its page or PDF part only, for print pipelines (#735). A file whose import left something out (hidden text, art or layers) is never written over by an export or Save As to its own path unless `acknowledgeLoss: true` (`convert --replace-lossy`), so the original keeps what the document lacks. Where a `.ai` can't be read that way (or its layers are turned off in the import options), we read its PDF-compatible part, so Illustrator-only live objects arrive as appearance, and plain groups arrive ungrouped: that part draws each object on its own and marks only layers, clipping groups and groups with opacity, blending or a mask (those come back). Art outside the artboards isn't in that part at all (Illustrator's PDF part leaves it out), so it doesn't open; the import says so in a note (#472). Its pages still go where the editing data puts the artboards (a grid stays a grid), with the art on each, when it has as many artboards as pages, of the same sizes (#1068); the page of the artboard `CropAreaActive` names is then the active artboard. A `.ai` whose editing data has artboards but no layers also opens on that page under the same check, and its pages stay where they are. A `.ai` whose PDF part's pages are cropped to its art (each page the box of all the art, which is the editing data's bounding box) instead of its artboards opens from its layers, with its own artboards, where they draw as that page does. Its pages are laid out so that art one of them draws past its artboard (notes beside a design, which the part doesn't clip) doesn't lie over the page before it in the row, where it was taken for that page's art: the check against the editing data then found art its layers don't have there and opened the file as its PDF part, without the art outside the artboards. That part also has no paragraphs: area type is written line by line, and comes back as area type only where its font is installed and lays the lines out with the same breaks, else as a point type object per line (#508). Art off the page that a PDF does draw opens on the pasteboard.
 the app's own editing copy of a file (an EPS after its `%%EOF`, a `.ai`'s `AIPrivateData` streams, a PDF's `AIPDFPrivateData` streams when it was saved with the editing data (#868), Zstandard or zlib, the EPS's in ASCII85) is not documented as a whole. VectorCraft reads its structure: layers and sublayers (names, order, visibility, lock, printing, preview, dimming, colour), groups as they were nested, compound paths (painted by their last path, or the last painted one, with the paths of groups inside them kept as their paths: #1410), clipping groups and layer clipping (several clipping paths in a clipping group, a layer or an opacity mask's art clip to their intersection, and a compound path of clipping paths stays one clip; clipping paths that would nest the art past the document's 32 levels stop the editing data from being read: #5789), object names, hidden and locked objects, fills and strokes (grey, CMYK, RGB, named and spot colours, spot colours defined in Lab with their Lab values (#1032), global process colours as global swatches at their tint; a stroke of width 0, `0 w`, on a path, a gradient-filled path, legacy type or in an art style comes in as a 0.25 pt hairline, as from PDF: #1671), linear and radial gradients, pattern fills with their patterns as pattern swatches (#1025), gradient and pattern names in the file up to their first newline (a name that another swatch, or a gradient or pattern defined earlier, already has is numbered "Sky 2"; a name without a newline is kept, and when another swatch has it, the pattern's swatch, or a named color sharing a gradient or pattern swatch's name, is numbered the same way), opacity, blend modes, isolation and knockout, embedded images where their matrix puts them, rotated ones too (#2269), with their alpha channel (CMYK images keep their ink amounts, as they do when a `.ai` opens from its PDF part, and an alpha channel that hides part of a CMYK image becomes a grayscale opacity mask), placed (linked) files as linked images in their place, each showing the low-resolution preview the file keeps of it until its file is found or relinked in the Links panel (#1264), with the folder the file keeps relative to the document's, where the link is looked for when its path is gone, guides, and every artboard where it is, with its center mark, cross hairs, video safe areas and video ruler pixel aspect ratio. VectorCraft reads `CropAreaActive`, an `/Int` in the dictionary that holds the artboard array, as the index of the active artboard in that array, and the file opens with that artboard active; without it, or when it names no artboard that opens, the first artboard is active. It also reads the Document Raster Effects Settings (resolution, color model, background, anti-alias, clipping mask, Add Around Object and Preserve Spot Colors), the author from the header's `%%For` (an EPS's own header when the editing data's has none), swatches for the header's `%%CMYKCustomColor` and `%%RGBCustomColor` colors that the document has none of, and `%%TemplateBox` in older files; a setting with a value of another type or out of range keeps its default. Objects on Path groups open live, with their path, their objects in order along it, Pivot and Rotate; one with a dragged spacing or other options opens as a plain group. A gradient with stops in the middle runs its whole ramp across its shape, and a gradient object does not pass its fill to the next path (#1390). An object whose art style is one fill and one stroke at most (solid colours, its own gradient, a variable-width profile) with Drop Shadow, Inner Glow, Outer Glow, Feather, Round Corners, Scribble, Offset Path, Outline Object, Outline Stroke, Convert to Shape, Tweak (only when it moves nothing) or Pucker & Bloat at 0 comes in as itself with them and their saved settings. A path, compound path or group (not a clipping group) whose only effect is Transform (not with copies or Random) or a Free Distort whose corners make a parallelogram comes in as itself with it too, when neither it nor anything in it paints with a gradient or pattern and everything in it is a path, compound path or group with no opacity mask and no effects of its own; Transform that scales, rotates or reflects needs nothing in it to be stroked. Twist as the only effect is read the same way on an unstroked path or compound path whose segments are all straight. One with more, other effects (Zig Zag, a Pucker & Bloat of another amount, a Free Distort with other corners), an effect setting that is not read (an unknown key, a missing or out-of-range value, a Scribble with a color of its own), dashes aligned to corners, a brush other than a Calligraphic one, or a Calligraphic brush with settings of its own or an angle that follows the path comes in as its drawn look (a group named after it). A path with a Calligraphic brush otherwise comes in as the path, the brush on its stroke at the stroke's weight, which scales the brush (#372). A Calligraphic brush's Pressure, Tilt, Bearing and Rotation come in as those channels (a 6D Art Pen's brushes vary with the pressure, the bearing and the barrel's rotation); its Stylus Wheel varies at random. The file's Calligraphic, Scatter, Art and Bristle brushes replace the default ones in the Brushes panel, in the file's order, also when the file comes in as its PDF part (a brush library has no layers); pattern brushes and brushes it can't read are left out with a note. Type keeps its art style as a live appearance whatever its stack, so it can be retyped: each fill and stroke of the style's stack (solid colours, gradients and pattern fills, placed as the drawn look places them) with its own opacity, blend mode and effects, the effects on the whole object, and where the characters paint among them; the effects read are Warp, Offset Path, Outline Object, Outline Stroke, Transform (with copies, Transform Objects, Transform Patterns and Scale Strokes & Effects; not with Random), Free Distort, Pucker & Bloat, Twist, Zig Zag, Tweak (only when it moves nothing, the file holding none of its random outline), Drop Shadow, Inner Glow, Outer Glow, Feather, Round Corners, Scribble, Gaussian Blur, Bas Relief (its settings at their defaults) and Convert to Shape, and a style with others, or with an effect setting that isn't read, keeps the type's drawn look. Convert to Shape keeps its Rectangle, Rounded Rectangle or Ellipse, its Absolute or Relative size (a relative size in the file is added to each side) and its corner radius; a relative Ellipse, or a setting that isn't read, keeps the drawn look. The page's drawing of such a style isn't held to look like VectorCraft's where its drawn look lay. Gradients take their matrix (`Xm`, radials and skewed ones too), focal point and the order of stops sharing a ramp point; gradient meshes, a clipping path's own fill and its stroke, and the artboards' names are read too. `editingData: "always"` (`convert --editing-data`) opens a `.ai` or an Illustrator EPS from its editing data even where it draws differently from its page, which can be older, with a note. Type is made from the file's text document, whole and editable, shown or not: point type (its frame's matrix, which newer files leave out when it is neither turned nor scaled, read as none), area type (a story in several frames as threaded type) and type on a path, with its characters, fonts, size, leading, tracking, scaling, baseline shift, fill and stroke (grey, RGB or CMYK), alignment, indents and paragraph spacing (a character attribute a run doesn't set comes from its character style, then the style that one is based on, then the document's defaults); area type keeps its frame's Area Type Options rows and columns, the gutter between rows and the gutter between columns, and its first baseline (Fixed, Cap Height, Leading or x Height) with its minimum; type on a path keeps its frame's Type on a Path effect, Align to Path and Flip, and the first frame's Spacing is fitted from the file's layout, not read from the dialog's value; the page's drawing of it (often in pieces) is left out. Vertical type keeps its orientation, its columns from right to left, and a run set to Tate-chu-yoko keeps that setting. When it makes the type of every text object that shows, the page's type is only compared with it, each text object keeps its own group, frame and layer, and a line break inside a paragraph stays one. Where it can't make a text object's type (a frame of another kind), that text object takes the page's type where the text document puts its lines, or else what is left of the page's type in painting order (no group around it); the page's type where made type draws stays that type's, and hidden type is left out with a note. Text wrap is read too: an object whose dictionary has the wrap options (offset and Invert Wrap), or any graphic of a legacy wraparound group (`*w` … `*W`, before or after its type, with no offset), is a wrap object, and area type below it in its layer flows around it when the file opens, threaded type included (#2763). Kerning, underline and the other character and paragraph options aren't read yet. A `.ai` saved without PDF compatibility (a placeholder page) opens from its editing data alone, its point type, area type and type on a path made from the text document. A `.ai` whose PDF part shows only text isn't taken for that placeholder when its page states an art, trim or bleed box: it opens from its editing data alone where that reads, else from its PDF part (#1387). A `.ai` whose PDF part draws nothing at all (an empty page, with or without those boxes) opens from its editing data alone where that reads too: there is no page art to check its layers against, and the empty page would lose all of it. Text objects with an appearance keep their own text and frame, type of hidden layers stays hidden, and type on later artboards lands on its text objects (#1391); area type whose frame is too short for a line of the fallback font shows its first line (the frame is made taller, with a warning in the open result) (#1392). Symbols are read into the Symbols panel, in the file's symbol list order, with their art, their registration point and the instances in their art, and their instances come in live with their matrix, name, hide, lock, opacity, blending mode, isolation, knockout and opacity mask; a symbol whose art isn't read whole (type, placed files, an image it leaves out or anything else it doesn't read) isn't kept. Symbols are read only with the layers: a file that comes in as its page or PDF part (editing data with no layers, layers that can't be read, or any of the cases below) opens with an empty Symbols panel. Instances of symbols it can't read, instances with appearance changes of their own (a dynamic symbol's), pattern fills whose pattern it can't read, placed files the data keeps no preview of and anything else it doesn't read make the file come in as its page (on a layer that doesn't show, they are left out of that layer), with a warning saying what. An unread object on a shown layer whose box can be found instead comes in as a group of the page's objects inside that box, named after it, with the rest of the layers and groups kept and a warning listing what came in as the page's art; the file still comes in as its page when live art or another unread object shares that page art, when the object spans two artboards or lies on an artboard that has no page, when no page art lies inside its box, when that page art is inside a page group with a clip, mask, transparency or appearance, when the object holds a frame of threaded type, when the page art uses a pattern, image or swatch that the page lacks or that differs from the editing data's, or when the page art doesn't carry its transparency (#4806). The layers' art is also compared with the page (by lightness, so colours written as their CMYK equivalents compare alike, and by whether a pixel is inked at all); the page is used when they differ by more than 5% (away from type, when all the type is made from the text document), where one draws an object the other doesn't (away from type, whose lines may be laid out afresh), and when an EPS whose page is its art's box has art printed outside it (#735). A `.ai` is not compared with its page, and its PDF part is not imported, when its text document makes the type of every text object (at least one shows, and none is drawn by the appearance of the layer or group it is in), no object is unread, no placed file has a second placement, no live envelope keeps its drawn art, it declares no large canvas, and its artboards are its pages' trim boxes one for one, in points or in the first page's `UserUnit`: it opens from its layers, with the bleed of its pages' bleed boxes. When they differ because some objects draw differently (an object in another color, or one that only one of them draws), each top-level object of the layers that holds such a difference comes in as a group of the page's objects inside its box and the layers stay, with a warning that names the layer or sublayer of each such object as the Layers panel shows it (`<Layer>` for one without a name) and how many came in from it; an export or Save As to the file's own path then needs `acknowledgeLoss: true`, and a wrap object replaced this way keeps its wrap options. The file still comes in as its page when only edges or type differ, when a difference lies outside every top-level object, when more than half of the top-level objects or more than 64 hold one, when such an object is or holds type or holds a wrap object inside a group, when the page's type of a text object that stays lies inside such an object's box, when the page's art can't replace such an object for one of the reasons above for an unread object, when matching the differences to the objects would take too much work, or when the result still differs from the page. `editingData: "always"` keeps the objects as read, and placed files at the other point their data gives are tried as well. An EPS whose page is its art's box keeps that page when it comes in through its layers, not the editing data's artboard, and a text object counts as drawn by the page by its colours, not only its lightness, so a red stroke stacked over a dark red one stays (#1102). `textAs: "outlines"` opens a `.ai` whose type shows from its PDF part, which has the outlines; `editingData: false` opens any of them as its page or PDF part only, for print pipelines (#735). A file whose import left something out (hidden text, art or layers) is never written over by an export or Save As to its own path unless `acknowledgeLoss: true` (`convert --replace-lossy`), so the original keeps what the document lacks. Where a `.ai` can't be read that way (or its layers are turned off in the import options), we read its PDF-compatible part, so Illustrator-only live objects arrive as appearance, and plain groups arrive ungrouped: that part draws each object on its own and marks only layers, clipping groups and groups with opacity, blending or a mask (those come back). Art outside the artboards isn't in that part at all (Illustrator's PDF part leaves it out), so it doesn't open; the import says so in a note (#472). Its pages still go where the editing data puts the artboards (a grid stays a grid), with the art on each, when it has as many artboards as pages, of the same sizes (#1068); the page of the artboard `CropAreaActive` names is then the active artboard. A `.ai` whose editing data has artboards but no layers also opens on that page under the same check, and its pages stay where they are. A `.ai` whose PDF part's pages are cropped to its art (each page the box of all the art, which is the editing data's bounding box) instead of its artboards opens from its layers, with its own artboards, where they draw as that page does. Its pages are laid out so that art one of them draws past its artboard (notes beside a design, which the part doesn't clip) doesn't lie over the page before it in the row, where it was taken for that page's art: the check against the editing data then found art its layers don't have there and opened the file as its PDF part, without the art outside the artboards. That part also has no paragraphs: area type is written line by line, and comes back as area type only where its font is installed and lays the lines out with the same breaks, else as a point type object per line (#508). Art off the page that a PDF does draw opens on the pasteboard.
 the app's own editing copy of a file (an EPS after its `%%EOF`, a `.ai`'s `AIPrivateData` streams, a PDF's `AIPDFPrivateData` streams when it was saved with the editing data (#868), Zstandard or zlib, the EPS's in ASCII85) is not documented as a whole. VectorCraft reads its structure: layers and sublayers (names, order, visibility, lock, printing, preview, dimming, colour), groups as they were nested, compound paths (painted by their last path, or the last painted one, with the paths of groups inside them kept as their paths: #1410), clipping groups and layer clipping (several clipping paths in a clipping group, a layer or an opacity mask's art clip to their intersection, and a compound path of clipping paths stays one clip; clipping paths that would nest the art past the document's 32 levels stop the editing data from being read: #5789), object names, hidden and locked objects, fills and strokes (grey, CMYK, RGB, named and spot colours, spot colours defined in Lab with their Lab values (#1032), global process colours as global swatches at their tint; a stroke of width 0, `0 w`, on a path, a gradient-filled path, legacy type or in an art style comes in as a 0.25 pt hairline, as from PDF: #1671), linear and radial gradients, pattern fills with their patterns as pattern swatches (#1025), gradient and pattern names in the file up to their first newline (a name that another swatch, or a gradient or pattern defined earlier, already has is numbered "Sky 2"; a name without a newline is kept, and when another swatch has it, the pattern's swatch, or a named color sharing a gradient or pattern swatch's name, is numbered the same way), opacity, blend modes, isolation and knockout, embedded images where their matrix puts them, rotated ones too (#2269), with their alpha channel (CMYK images keep their ink amounts, as they do when a `.ai` opens from its PDF part, and an alpha channel that hides part of a CMYK image becomes a grayscale opacity mask), placed (linked) files as linked images in their place, each showing the low-resolution preview the file keeps of it until its file is found or relinked in the Links panel (#1264), with the folder the file keeps relative to the document's, where the link is looked for when its path is gone, guides, and every artboard where it is, with its center mark, cross hairs, video safe areas and video ruler pixel aspect ratio. VectorCraft reads `CropAreaActive`, an `/Int` in the dictionary that holds the artboard array, as the index of the active artboard in that array, and the file opens with that artboard active; without it, or when it names no artboard that opens, the first artboard is active. It also reads the Document Raster Effects Settings (resolution, color model, background, anti-alias, clipping mask, Add Around Object and Preserve Spot Colors), the author from the header's `%%For` (an EPS's own header when the editing data's has none), swatches for the header's `%%CMYKCustomColor` and `%%RGBCustomColor` colors that the document has none of, and `%%TemplateBox` in older files; a setting with a value of another type or out of range keeps its default. Objects on Path groups open live, with their path, their objects in order along it, Pivot and Rotate; one with a dragged spacing or other options opens as a plain group. A gradient with stops in the middle runs its whole ramp across its shape, and a gradient object does not pass its fill to the next path (#1390). An object whose art style is one fill and one stroke at most (solid colours, its own gradient, a variable-width profile) with Drop Shadow, Inner Glow, Outer Glow, Feather, Round Corners, Scribble, Offset Path, Outline Object, Outline Stroke, Convert to Shape, Tweak (only when it moves nothing) or Pucker & Bloat at 0 comes in as itself with them and their saved settings. A path, compound path or group (not a clipping group) whose only effect is Transform (not with copies or Random) or a Free Distort whose corners make a parallelogram comes in as itself with it too, when neither it nor anything in it paints with a gradient or pattern and everything in it is a path, compound path or group with no opacity mask and no effects of its own; Transform that scales, rotates or reflects needs nothing in it to be stroked. Twist as the only effect is read the same way on an unstroked path or compound path whose segments are all straight. One with more, other effects (Zig Zag, a Pucker & Bloat of another amount, a Free Distort with other corners), an effect setting that is not read (an unknown key, a missing or out-of-range value, a Scribble with a color of its own), dashes aligned to corners, a brush other than a Calligraphic one, or a Calligraphic brush with settings of its own or an angle that follows the path comes in as its drawn look (a group named after it). Objects in a symbol defined before the file's art styles section, as newer files write it, take the same styles as the layers' objects. A path with a Calligraphic brush otherwise comes in as the path, the brush on its stroke at the stroke's weight, which scales the brush (#372). A Calligraphic brush's Pressure, Tilt, Bearing and Rotation come in as those channels (a 6D Art Pen's brushes vary with the pressure, the bearing and the barrel's rotation); its Stylus Wheel varies at random. The file's Calligraphic, Scatter, Art and Bristle brushes replace the default ones in the Brushes panel, in the file's order, also when the file comes in as its PDF part (a brush library has no layers); pattern brushes and brushes it can't read are left out with a note. Type keeps its art style as a live appearance whatever its stack, so it can be retyped: each fill and stroke of the style's stack (solid colours, gradients and pattern fills, placed as the drawn look places them) with its own opacity, blend mode and effects, the effects on the whole object, and where the characters paint among them; the effects read are Warp, Offset Path, Outline Object, Outline Stroke, Transform (with copies, Transform Objects, Transform Patterns and Scale Strokes & Effects; not with Random), Free Distort, Pucker & Bloat, Twist, Zig Zag, Tweak (only when it moves nothing, the file holding none of its random outline), Drop Shadow, Inner Glow, Outer Glow, Feather, Round Corners, Scribble, Gaussian Blur, Bas Relief (its settings at their defaults) and Convert to Shape, and a style with others, or with an effect setting that isn't read, keeps the type's drawn look. Convert to Shape keeps its Rectangle, Rounded Rectangle or Ellipse, its Absolute or Relative size (a relative size in the file is added to each side) and its corner radius; a relative Ellipse, or a setting that isn't read, keeps the drawn look. The page's drawing of such a style isn't held to look like VectorCraft's where its drawn look lay. Gradients take their matrix (`Xm`, radials and skewed ones too), focal point and the order of stops sharing a ramp point; gradient meshes, a clipping path's own fill and its stroke, and the artboards' names are read too. `editingData: "always"` (`convert --editing-data`) opens a `.ai` or an Illustrator EPS from its editing data even where it draws differently from its page, which can be older, with a note. Type is made from the file's text document, whole and editable, shown or not: point type (its frame's matrix, which newer files leave out when it is neither turned nor scaled, read as none), area type (a story in several frames as threaded type) and type on a path, with its characters, fonts, size, leading, tracking, scaling, baseline shift, fill and stroke (grey, RGB or CMYK), alignment, indents and paragraph spacing (a character attribute a run doesn't set comes from its character style, then the style that one is based on, then the document's defaults); area type keeps its frame's Area Type Options rows and columns, the gutter between rows and the gutter between columns, and its first baseline (Fixed, Cap Height, Leading or x Height) with its minimum; the page's drawing of it (often in pieces) is left out. Vertical type keeps its orientation, its columns from right to left, and a run set to Tate-chu-yoko keeps that setting. When it makes the type of every text object that shows, the page's type is only compared with it, each text object keeps its own group, frame and layer, and a line break inside a paragraph stays one. Where it can't make a text object's type (a frame of another kind), that text object takes the page's type where the text document puts its lines, or else what is left of the page's type in painting order (no group around it); the page's type where made type draws stays that type's, and hidden type is left out with a note. Text wrap is read too: an object whose dictionary has the wrap options (offset and Invert Wrap), or any graphic of a legacy wraparound group (`*w` … `*W`, before or after its type, with no offset), is a wrap object, and area type below it in its layer flows around it when the file opens, threaded type included (#2763). Kerning, underline and the other character and paragraph options aren't read yet. A `.ai` saved without PDF compatibility (a placeholder page) opens from its editing data alone, its point type, area type and type on a path made from the text document. A `.ai` whose PDF part shows only text isn't taken for that placeholder when its page states an art, trim or bleed box: it opens from its editing data alone where that reads, else from its PDF part (#1387). A `.ai` whose PDF part draws nothing at all (an empty page, with or without those boxes) opens from its editing data alone where that reads too: there is no page art to check its layers against, and the empty page would lose all of it. Text objects with an appearance keep their own text and frame, type of hidden layers stays hidden, and type on later artboards lands on its text objects (#1391); area type whose frame is too short for a line of the fallback font shows its first line (the frame is made taller, with a warning in the open result) (#1392). Symbols are read into the Symbols panel, in the file's symbol list order, with their art, their registration point and the instances in their art, and their instances come in live with their matrix, name, hide, lock, opacity, blending mode, isolation, knockout and opacity mask; a symbol whose art isn't read whole (type, placed files, an image it leaves out or anything else it doesn't read) isn't kept. Symbols are read only with the layers: a file that comes in as its page or PDF part (editing data with no layers, layers that can't be read, or any of the cases below) opens with an empty Symbols panel. Instances of symbols it can't read, instances with appearance changes of their own (a dynamic symbol's), pattern fills whose pattern it can't read, placed files the data keeps no preview of and anything else it doesn't read make the file come in as its page (on a layer that doesn't show, they are left out of that layer), with a warning saying what. An unread object on a shown layer whose box can be found instead comes in as a group of the page's objects inside that box, named after it, with the rest of the layers and groups kept and a warning listing what came in as the page's art; the file still comes in as its page when live art or another unread object shares that page art, when the object spans two artboards or lies on an artboard that has no page, when no page art lies inside its box, when that page art is inside a page group with a clip, mask, transparency or appearance, when the object holds a frame of threaded type, when the page art uses a pattern, image or swatch that the page lacks or that differs from the editing data's, or when the page art doesn't carry its transparency (#4806). The layers' art is also compared with the page (by lightness, so colours written as their CMYK equivalents compare alike, and by whether a pixel is inked at all); the page is used when they differ by more than 5% (away from type, when all the type is made from the text document), where one draws an object the other doesn't (away from type, whose lines may be laid out afresh), and when an EPS whose page is its art's box has art printed outside it (#735). A `.ai` is not compared with its page, and its PDF part is not imported, when its text document makes the type of every text object (at least one shows, and none is drawn by the appearance of the layer or group it is in), no object is unread, no placed file has a second placement, no live envelope keeps its drawn art, it declares no large canvas, and its artboards are its pages' trim boxes one for one, in points or in the first page's `UserUnit`: it opens from its layers, with the bleed of its pages' bleed boxes. When they differ because some objects draw differently (an object in another color, or one that only one of them draws), each top-level object of the layers that holds such a difference comes in as a group of the page's objects inside its box and the layers stay, with a warning that names the layer or sublayer of each such object as the Layers panel shows it (`<Layer>` for one without a name) and how many came in from it; an export or Save As to the file's own path then needs `acknowledgeLoss: true`, and a wrap object replaced this way keeps its wrap options. The file still comes in as its page when only edges or type differ, when a difference lies outside every top-level object, when more than half of the top-level objects or more than 64 hold one, when such an object is or holds type or holds a wrap object inside a group, when the page's type of a text object that stays lies inside such an object's box, when the page's art can't replace such an object for one of the reasons above for an unread object, when matching the differences to the objects would take too much work, or when the result still differs from the page. `editingData: "always"` keeps the objects as read, and placed files at the other point their data gives are tried as well. An EPS whose page is its art's box keeps that page when it comes in through its layers, not the editing data's artboard, and a text object counts as drawn by the page by its colours, not only its lightness, so a red stroke stacked over a dark red one stays (#1102). `textAs: "outlines"` opens a `.ai` whose type shows from its PDF part, which has the outlines; `editingData: false` opens any of them as its page or PDF part only, for print pipelines (#735). A file whose import left something out (hidden text, art or layers) is never written over by an export or Save As to its own path unless `acknowledgeLoss: true` (`convert --replace-lossy`), so the original keeps what the document lacks. Where a `.ai` can't be read that way (or its layers are turned off in the import options), we read its PDF-compatible part, so Illustrator-only live objects arrive as appearance, and plain groups arrive ungrouped: that part draws each object on its own and marks only layers, clipping groups and groups with opacity, blending or a mask (those come back). Art outside the artboards isn't in that part at all (Illustrator's PDF part leaves it out), so it doesn't open; the import says so in a note (#472). Its pages still go where the editing data puts the artboards (a grid stays a grid), with the art on each, when it has as many artboards as pages, of the same sizes (#1068); the page of the artboard `CropAreaActive` names is then the active artboard. A `.ai` whose editing data has artboards but no layers also opens on that page under the same check, and its pages stay where they are. A `.ai` whose PDF part's pages are cropped to its art (each page the box of all the art, which is the editing data's bounding box) instead of its artboards opens from its layers, with its own artboards, where they draw as that page does. Its pages are laid out so that art one of them draws past its artboard (notes beside a design, which the part doesn't clip) doesn't lie over the page before it in the row, where it was taken for that page's art: the check against the editing data then found art its layers don't have there and opened the file as its PDF part, without the art outside the artboards. That part also has no paragraphs: area type is written line by line, and comes back as area type only where its font is installed and lays the lines out with the same breaks, else as a point type object per line (#508). Art off the page that a PDF does draw opens on the pasteboard.
 the app's own editing copy of a file (an EPS after its `%%EOF`, a `.ai`'s `AIPrivateData` streams, a PDF's `AIPDFPrivateData` streams when it was saved with the editing data (#868), Zstandard or zlib, the EPS's in ASCII85) is not documented as a whole. VectorCraft reads its structure: layers and sublayers (names, order, visibility, lock, printing, preview, dimming, colour), groups as they were nested, compound paths (painted by their last path, or the last painted one, with the paths of groups inside them kept as their paths: #1410), clipping groups and layer clipping (several clipping paths in a clipping group, a layer or an opacity mask's art clip to their intersection, and a compound path of clipping paths stays one clip; clipping paths that would nest the art past the document's 32 levels stop the editing data from being read: #5789), object names, hidden and locked objects, fills and strokes (grey, CMYK, RGB, named and spot colours, spot colours defined in Lab with their Lab values (#1032), global process colours as global swatches at their tint; a stroke of width 0, `0 w`, on a path, a gradient-filled path, legacy type or in an art style comes in as a 0.25 pt hairline, as from PDF: #1671), linear and radial gradients, pattern fills with their patterns as pattern swatches (#1025), gradient and pattern names in the file up to their first newline (a name that another swatch, or a gradient or pattern defined earlier, already has is numbered "Sky 2"; a name without a newline is kept, and when another swatch has it, the pattern's swatch, or a named color sharing a gradient or pattern swatch's name, is numbered the same way), opacity, blend modes, isolation and knockout, embedded images where their matrix puts them, rotated ones too (#2269), with their alpha channel (CMYK images keep their ink amounts, as they do when a `.ai` opens from its PDF part, and an alpha channel that hides part of a CMYK image becomes a grayscale opacity mask), placed (linked) files as linked images in their place, each showing the low-resolution preview the file keeps of it until its file is found or relinked in the Links panel (#1264), with the folder the file keeps relative to the document's, where the link is looked for when its path is gone, placed PDF and `.ai` pages as placed documents of the [page and Crop to box](https://helpx.adobe.com/illustrator/desktop/add-and-import-files/import-other-file-types/adobe-pdf-placement-options.html) their dictionary names (`AI11 PlacedPDFPageIndex`, `AI11 PlacedPDFCropTo`; a value VectorCraft doesn't read, or a binding to an image variable, leaves a linked image), guides, and every artboard where it is, with its center mark, cross hairs, video safe areas and video ruler pixel aspect ratio. VectorCraft reads `CropAreaActive`, an `/Int` in the dictionary that holds the artboard array, as the index of the active artboard in that array, and the file opens with that artboard active; without it, or when it names no artboard that opens, the first artboard is active. It also reads the Document Raster Effects Settings (resolution, color model, background, anti-alias, clipping mask, Add Around Object and Preserve Spot Colors), the author from the header's `%%For` (an EPS's own header when the editing data's has none), swatches for the header's `%%CMYKCustomColor` and `%%RGBCustomColor` colors that the document has none of, and `%%TemplateBox` in older files; a setting with a value of another type or out of range keeps its default. Objects on Path groups open live, with their path, their objects in order along it, Pivot and Rotate; one with a dragged spacing or other options opens as a plain group. A gradient with stops in the middle runs its whole ramp across its shape, and a gradient object does not pass its fill to the next path (#1390). An object whose art style is one fill and one stroke at most (solid colours, its own gradient, a variable-width profile) with Drop Shadow, Inner Glow, Outer Glow, Feather, Round Corners, Scribble, Offset Path, Outline Object, Outline Stroke, Convert to Shape, Tweak (only when it moves nothing) or Pucker & Bloat at 0 comes in as itself with them and their saved settings. A path, compound path or group (not a clipping group) whose only effect is Transform (not with copies or Random) or a Free Distort whose corners make a parallelogram comes in as itself with it too, when neither it nor anything in it paints with a gradient or pattern and everything in it is a path, compound path or group with no opacity mask and no effects of its own; Transform that scales, rotates or reflects needs nothing in it to be stroked. Twist as the only effect is read the same way on an unstroked path or compound path whose segments are all straight. One with more, other effects (Zig Zag, a Pucker & Bloat of another amount, a Free Distort with other corners), an effect setting that is not read (an unknown key, a missing or out-of-range value, a Scribble with a color of its own), dashes aligned to corners, a brush other than a Calligraphic or Art one, a Calligraphic brush with settings of its own or an angle that follows the path, or an Art brush other than the ones described next comes in as its drawn look (a group named after it). A path with a Calligraphic brush otherwise comes in as the path, the brush on its stroke at the stroke's weight, which scales the brush (#372), and so does a path with an Art brush, whose weight scales the art across the path, when all of these hold: the brush stretches its art along the path, unflipped, at 100% in Tints; the path's settings are the brush's own, with no entry that isn't read, no variable width and no effects; its stroke isn't a swatch; and the art is paths, compound paths and groups in solid fills, with no strokes, masks or effects, and has some length along the path. A stroke takes the brush the Brushes panel keeps under its name, and one whose name the panel doesn't keep comes in as its drawn look. Type with an Art brush keeps its drawn look under the type. A Calligraphic brush's Pressure, Tilt, Bearing and Rotation come in as those channels (a 6D Art Pen's brushes vary with the pressure, the bearing and the barrel's rotation); its Stylus Wheel varies at random. The file's Calligraphic, Scatter, Art and Bristle brushes replace the default ones in the Brushes panel, in the file's order, also when the file comes in as its PDF part (a brush library has no layers); pattern brushes and brushes it can't read are left out with a note. Type keeps its art style as a live appearance whatever its stack (an Art brush aside), so it can be retyped: each fill and stroke of the style's stack (solid colours, gradients and pattern fills, placed as the drawn look places them) with its own opacity, blend mode and effects, the effects on the whole object, and where the characters paint among them; the effects read are Warp, Offset Path, Outline Object, Outline Stroke, Transform (with copies, Transform Objects, Transform Patterns and Scale Strokes & Effects; not with Random), Free Distort, Pucker & Bloat, Twist, Zig Zag, Tweak (only when it moves nothing, the file holding none of its random outline), Drop Shadow, Inner Glow, Outer Glow, Feather, Round Corners, Scribble, Gaussian Blur, Bas Relief (its settings at their defaults) and Convert to Shape, and a style with others, or with an effect setting that isn't read, keeps the type's drawn look. Convert to Shape keeps its Rectangle, Rounded Rectangle or Ellipse, its Absolute or Relative size (a relative size in the file is added to each side) and its corner radius; a relative Ellipse, or a setting that isn't read, keeps the drawn look. The page's drawing of such a style isn't held to look like VectorCraft's where its drawn look lay. Gradients take their matrix (`Xm`, radials and skewed ones too), focal point and the order of stops sharing a ramp point; gradient meshes, a clipping path's own fill and its stroke, and the artboards' names are read too. `editingData: "always"` (`convert --editing-data`) opens a `.ai` or an Illustrator EPS from its editing data even where it draws differently from its page, which can be older, with a note. Type is made from the file's text document, whole and editable, shown or not: point type (its frame's matrix, which newer files leave out when it is neither turned nor scaled, read as none), area type (a story in several frames as threaded type) and type on a path, with its characters, fonts, size, leading, tracking, scaling, baseline shift, fill and stroke (grey, RGB or CMYK), alignment, indents and paragraph spacing (a character attribute a run doesn't set comes from its character style, then the style that one is based on, then the document's defaults); area type keeps its frame's Area Type Options rows and columns, the gutter between rows and the gutter between columns, and its first baseline (Fixed, Cap Height, Leading or x Height) with its minimum; the page's drawing of it (often in pieces) is left out. Vertical type keeps its orientation, its columns from right to left, and a run set to Tate-chu-yoko keeps that setting. When it makes the type of every text object that shows, the page's type is only compared with it, each text object keeps its own group, frame and layer, and a line break inside a paragraph stays one. Where it can't make a text object's type (a frame of another kind), that text object takes the page's type where the text document puts its lines, or else what is left of the page's type in painting order (no group around it); the page's type where made type draws stays that type's, and hidden type is left out with a note. Text wrap is read too: an object whose dictionary has the wrap options (offset and Invert Wrap), or any graphic of a legacy wraparound group (`*w` … `*W`, before or after its type, with no offset), is a wrap object, and area type below it in its layer flows around it when the file opens, threaded type included (#2763). Kerning, underline and the other character and paragraph options aren't read yet. A `.ai` saved without PDF compatibility (a placeholder page) opens from its editing data alone, its point type, area type and type on a path made from the text document. A `.ai` whose PDF part shows only text isn't taken for that placeholder when its page states an art, trim or bleed box: it opens from its editing data alone where that reads, else from its PDF part (#1387). A `.ai` whose PDF part draws nothing at all (an empty page, with or without those boxes) opens from its editing data alone where that reads too: there is no page art to check its layers against, and the empty page would lose all of it. Text objects with an appearance keep their own text and frame, type of hidden layers stays hidden, and type on later artboards lands on its text objects (#1391); area type whose frame is too short for a line of the fallback font shows its first line (the frame is made taller, with a warning in the open result) (#1392). Symbols are read into the Symbols panel, in the file's symbol list order, with their art, their registration point and the instances in their art, and their instances come in live with their matrix, name, hide, lock, opacity, blending mode, isolation, knockout and opacity mask; a symbol whose art isn't read whole (type, placed files, an image it leaves out or anything else it doesn't read) isn't kept. Symbols are read only with the layers: a file that comes in as its page or PDF part (editing data with no layers, layers that can't be read, or any of the cases below) opens with an empty Symbols panel. Instances of symbols it can't read, instances with appearance changes of their own (a dynamic symbol's), pattern fills whose pattern it can't read, placed files the data keeps no preview of and anything else it doesn't read make the file come in as its page (on a layer that doesn't show, they are left out of that layer), with a warning saying what. An unread object on a shown layer whose box can be found instead comes in as a group of the page's objects inside that box, named after it, with the rest of the layers and groups kept and a warning listing what came in as the page's art; the file still comes in as its page when live art or another unread object shares that page art, when the object spans two artboards or lies on an artboard that has no page, when no page art lies inside its box, when that page art is inside a page group with a clip, mask, transparency or appearance, when the object holds a frame of threaded type, when the page art uses a pattern, image or swatch that the page lacks or that differs from the editing data's, or when the page art doesn't carry its transparency (#4806). The layers' art is also compared with the page (by lightness, so colours written as their CMYK equivalents compare alike, and by whether a pixel is inked at all); the page is used when they differ by more than 5% (away from type, when all the type is made from the text document), where one draws an object the other doesn't (away from type, whose lines may be laid out afresh), and when an EPS whose page is its art's box has art printed outside it (#735). A `.ai` is not compared with its page, and its PDF part is not imported, when its text document makes the type of every text object (at least one shows, and none is drawn by the appearance of the layer or group it is in), no object is unread, no placed file has a second placement, no live envelope keeps its drawn art, it declares no large canvas, and its artboards are its pages' trim boxes one for one, in points or in the first page's `UserUnit`: it opens from its layers, with the bleed of its pages' bleed boxes. When they differ because some objects draw differently (an object in another color, or one that only one of them draws), each top-level object of the layers that holds such a difference comes in as a group of the page's objects inside its box and the layers stay, with a warning that names the layer or sublayer of each such object as the Layers panel shows it (`<Layer>` for one without a name) and how many came in from it; an export or Save As to the file's own path then needs `acknowledgeLoss: true`, and a wrap object replaced this way keeps its wrap options. The file still comes in as its page when only edges or type differ, when a difference lies outside every top-level object, when more than half of the top-level objects or more than 64 hold one, when such an object is or holds type or holds a wrap object inside a group, when the page's type of a text object that stays lies inside such an object's box, when the page's art can't replace such an object for one of the reasons above for an unread object, when matching the differences to the objects would take too much work, or when the result still differs from the page. `editingData: "always"` keeps the objects as read, and placed files at the other point their data gives are tried as well. An EPS whose page is its art's box keeps that page when it comes in through its layers, not the editing data's artboard, and a text object counts as drawn by the page by its colours, not only its lightness, so a red stroke stacked over a dark red one stays (#1102). `textAs: "outlines"` opens a `.ai` whose type shows from its PDF part, which has the outlines; `editingData: false` opens any of them as its page or PDF part only, for print pipelines (#735). A file whose import left something out (hidden text, art or layers) is never written over by an export or Save As to its own path unless `acknowledgeLoss: true` (`convert --replace-lossy`), so the original keeps what the document lacks. Where a `.ai` can't be read that way (or its layers are turned off in the import options), we read its PDF-compatible part, so Illustrator-only live objects arrive as appearance, and plain groups arrive ungrouped: that part draws each object on its own and marks only layers, clipping groups and groups with opacity, blending or a mask (those come back). Art outside the artboards isn't in that part at all (Illustrator's PDF part leaves it out), so it doesn't open; the import says so in a note (#472). Its pages still go where the editing data puts the artboards (a grid stays a grid), with the art on each, when it has as many artboards as pages, of the same sizes (#1068); the page of the artboard `CropAreaActive` names is then the active artboard. A `.ai` whose editing data has artboards but no layers also opens on that page under the same check, and its pages stay where they are. A `.ai` whose PDF part's pages are cropped to its art (each page the box of all the art, which is the editing data's bounding box) instead of its artboards opens from its layers, with its own artboards, where they draw as that page does. Its pages are laid out so that art one of them draws past its artboard (notes beside a design, which the part doesn't clip) doesn't lie over the page before it in the row, where it was taken for that page's art: the check against the editing data then found art its layers don't have there and opened the file as its PDF part, without the art outside the artboards. That part also has no paragraphs: area type is written line by line, and comes back as area type only where its font is installed and lays the lines out with the same breaks, else as a point type object per line (#508). Art off the page that a PDF does draw opens on the pasteboard.
@@ -248,9 +248,9 @@ the app's own editing copy of a file (an EPS after its `%%EOF`, a `.ai`'s `AIPri
 the app's own editing copy of a file (an EPS after its `%%EOF`, a `.ai`'s `AIPrivateData` streams, a PDF's `AIPDFPrivateData` streams when it was saved with the editing data (#868), Zstandard or zlib, the EPS's in ASCII85) is not documented as a whole. VectorCraft reads its structure: layers and sublayers (names, order, visibility, lock, printing, preview, dimming, colour), groups as they were nested, compound paths (painted by their last path, or the last painted one, with the paths of groups inside them kept as their paths: #1410), clipping groups and layer clipping (several clipping paths in a clipping group, a layer or an opacity mask's art clip to their intersection, and a compound path of clipping paths stays one clip; clipping paths that would nest the art past the document's 32 levels stop the editing data from being read: #5789), object names, hidden and locked objects, fills and strokes (grey, CMYK, RGB, named and spot colours, spot colours defined in Lab with their Lab values (#1032), global process colours as global swatches at their tint; a stroke of width 0, `0 w`, on a path, a gradient-filled path, legacy type or in an art style comes in as a 0.25 pt hairline, as from PDF: #1671), linear and radial gradients, pattern fills with their patterns as pattern swatches (#1025), gradient and pattern names in the file up to their first newline (a name that another swatch, or a gradient or pattern defined earlier, already has is numbered "Sky 2"; a name without a newline is kept, and when another swatch has it, the pattern's swatch, or a named color sharing a gradient or pattern swatch's name, is numbered the same way), opacity, blend modes, isolation and knockout, embedded images where their matrix puts them, rotated ones too (#2269), with their alpha channel (CMYK images keep their ink amounts, as they do when a `.ai` opens from its PDF part, and an alpha channel that hides part of a CMYK image becomes a grayscale opacity mask), placed (linked) files as linked images in their place, each showing the low-resolution preview the file keeps of it until its file is found or relinked in the Links panel (#1264), with the folder the file keeps relative to the document's, where the link is looked for when its path is gone, guides, and every artboard where it is, with its center mark, cross hairs, video safe areas and video ruler pixel aspect ratio. VectorCraft reads `CropAreaActive`, an `/Int` in the dictionary that holds the artboard array, as the index of the active artboard in that array, and the file opens with that artboard active; without it, or when it names no artboard that opens, the first artboard is active. It also reads the Document Raster Effects Settings (resolution, color model, background, anti-alias, clipping mask, Add Around Object and Preserve Spot Colors), the author from the header's `%%For` (an EPS's own header when the editing data's has none), swatches for the header's `%%CMYKCustomColor` and `%%RGBCustomColor` colors that the document has none of, and `%%TemplateBox` in older files; a setting with a value of another type or out of range keeps its default. Objects on Path groups open live, with their path, their objects in order along it, Pivot and Rotate; one with a dragged spacing or other options opens as a plain group. A gradient with stops in the middle runs its whole ramp across its shape, and a gradient object does not pass its fill to the next path (#1390). An object whose art style is one fill and one stroke at most (solid colours, its own gradient, a variable-width profile) with Drop Shadow, Inner Glow, Outer Glow, Feather, Round Corners, Scribble, Offset Path, Outline Object, Outline Stroke, Convert to Shape, Tweak (only when it moves nothing), Pucker & Bloat at 0 or Bas Relief (read from its settings block: [raster effects reference](https://helpx.adobe.com/illustrator/desktop/special-effects-styles/apply-filter-effects/raster-effects-reference.html), [Photoshop File Formats Specification](https://www.adobe.com/devnet-apps/photoshop/fileformatashtml/), [scripting the filter gallery](https://community.adobe.com/questions-712/scripting-support-for-the-filter-gallery-1064646)) comes in as itself with them and their saved settings. A path, compound path or group (not a clipping group) whose only effect is Transform (not with copies or Random) or a Free Distort whose corners make a parallelogram comes in as itself with it too, when neither it nor anything in it paints with a gradient or pattern and everything in it is a path, compound path or group with no opacity mask and no effects of its own; Transform that scales, rotates or reflects needs nothing in it to be stroked. Twist as the only effect is read the same way on an unstroked path or compound path whose segments are all straight. One with more, other effects (Zig Zag, a Pucker & Bloat of another amount, a Free Distort with other corners), an effect setting that is not read (an unknown key, a missing or out-of-range value, a Scribble with a color of its own), dashes aligned to corners, a brush other than a Calligraphic or Art one, a Calligraphic brush with settings of its own or an angle that follows the path, or an Art brush other than the ones described next comes in as its drawn look (a group named after it). Objects in a symbol defined before the file's art styles section, as newer files write it, take the same styles as the layers' objects. A path with a Calligraphic brush otherwise comes in as the path, the brush on its stroke at the stroke's weight, which scales the brush (#372), and so does a path with an Art brush, whose weight scales the art across the path, when all of these hold: the brush stretches its art along the path, unflipped, at 100% in Tints; the path's settings are the brush's own, with no entry that isn't read, no variable width and no effects; its stroke isn't a swatch; and the art is paths, compound paths and groups in solid fills, with no strokes, masks or effects, and has some length along the path. A stroke takes the brush the Brushes panel keeps under its name, and one whose name the panel doesn't keep comes in as its drawn look. Type with an Art brush keeps its drawn look under the type. A Calligraphic brush's Pressure, Tilt, Bearing and Rotation come in as those channels (a 6D Art Pen's brushes vary with the pressure, the bearing and the barrel's rotation); its Stylus Wheel varies at random. The file's Calligraphic, Scatter, Art and Bristle brushes replace the default ones in the Brushes panel, in the file's order, also when the file comes in as its PDF part (a brush library has no layers); pattern brushes and brushes it can't read are left out with a note. When the file opens from its layers, the spot colors in the art of each brush that comes in become swatches, and that art's colors count toward the document's color mode, as a pattern's do. The swatches take at most 20,000 color names in all across the brush art, and each brush-art section keeps at most 20,000 names. Each name keeps its first definition, with the color operators' names before the gradient stops' names. A spot color past those limits makes no swatch, and its color still counts toward the color mode. A spot color that the page's art, a pattern or a symbol also defines keeps the value defined there. Type keeps its art style as a live appearance whatever its stack (an Art brush aside), so it can be retyped: each fill and stroke of the style's stack (solid colours, gradients and pattern fills, placed as the drawn look places them) with its own opacity, blend mode and effects, the effects on the whole object, and where the characters paint among them; the effects read are Warp, Offset Path, Outline Object, Outline Stroke, Transform (with copies, Transform Objects, Transform Patterns and Scale Strokes & Effects; not with Random), Free Distort, Pucker & Bloat, Twist, Zig Zag, Tweak (only when it moves nothing, the file holding none of its random outline), Drop Shadow, Inner Glow, Outer Glow, Feather, Round Corners, Scribble, Gaussian Blur, Bas Relief (its detail, smoothness and light direction from its settings block, or the effect's defaults when the style holds no settings block; a settings block that isn't read keeps the drawn look) and Convert to Shape, and a style with others, or with an effect setting that isn't read, keeps the type's drawn look. Convert to Shape keeps its Rectangle, Rounded Rectangle or Ellipse, its Absolute or Relative size (a relative size in the file is added to each side) and its corner radius; a relative Ellipse, or a setting that isn't read, keeps the drawn look. The page's drawing of such a style isn't held to look like VectorCraft's where its drawn look lay. Gradients take their matrix (`Xm`, radials and skewed ones too), focal point and the order of stops sharing a ramp point; gradient meshes, a clipping path's own fill and its stroke, and the artboards' names are read too. `editingData: "always"` (`convert --editing-data`) opens a `.ai` or an Illustrator EPS from its editing data even where it draws differently from its page, which can be older, with a note. Type is made from the file's text document, whole and editable, shown or not: point type (its frame's matrix, which newer files leave out when it is neither turned nor scaled, read as none), area type (a story in several frames as threaded type) and type on a path, with its characters, fonts, size, leading, tracking, scaling, baseline shift, fill and stroke (grey, RGB or CMYK), alignment, indents and paragraph spacing (a character attribute a run doesn't set comes from its character style, then the style that one is based on, then the document's defaults); area type keeps its frame's Area Type Options rows and columns, the gutter between rows and the gutter between columns, and its first baseline (Fixed, Cap Height, Leading or x Height) with its minimum; the page's drawing of it (often in pieces) is left out. Vertical type keeps its orientation, its columns from right to left, and a run set to Tate-chu-yoko keeps that setting. When it makes the type of every text object that shows, the page's type is only compared with it, each text object keeps its own group, frame and layer, and a line break inside a paragraph stays one. Where it can't make a text object's type (a frame of another kind), that text object takes the page's type where the text document puts its lines, or else what is left of the page's type in painting order (no group around it); the page's type where made type draws stays that type's, and hidden type is left out with a note. Text wrap is read too: an object whose dictionary has the wrap options (offset and Invert Wrap), or any graphic of a legacy wraparound group (`*w` … `*W`, before or after its type, with no offset), is a wrap object, and area type below it in its layer flows around it when the file opens, threaded type included (#2763). Kerning, underline and the other character and paragraph options aren't read yet. A `.ai` saved without PDF compatibility (a placeholder page) opens from its editing data alone, its point type, area type and type on a path made from the text document. A `.ai` whose PDF part shows only text isn't taken for that placeholder when its page states an art, trim or bleed box: it opens from its editing data alone where that reads, else from its PDF part (#1387). A `.ai` whose PDF part draws nothing at all (an empty page, with or without those boxes) opens from its editing data alone where that reads too: there is no page art to check its layers against, and the empty page would lose all of it. Text objects with an appearance keep their own text and frame, type of hidden layers stays hidden, and type on later artboards lands on its text objects (#1391); area type whose frame is too short for a line of the fallback font shows its first line (the frame is made taller, with a warning in the open result) (#1392). Symbols are read into the Symbols panel, in the file's symbol list order, with their art, their registration point and the instances in their art, and their instances come in live with their matrix, name, hide, lock, opacity, blending mode, isolation, knockout and opacity mask; a symbol whose art isn't read whole (type, placed files, an image it leaves out or anything else it doesn't read) isn't kept. Symbols are read only with the layers: a file that comes in as its page or PDF part (editing data with no layers, layers that can't be read, or any of the cases below) opens with an empty Symbols panel. Instances of symbols it can't read, instances with appearance changes of their own (a dynamic symbol's), pattern fills whose pattern it can't read, placed files the data keeps no preview of and anything else it doesn't read make the file come in as its page (on a layer that doesn't show, they are left out of that layer), with a warning saying what. An unread object on a shown layer whose box can be found instead comes in as a group of the page's objects inside that box, named after it, with the rest of the layers and groups kept and a warning listing what came in as the page's art; the file still comes in as its page when live art or another unread object shares that page art, when the object spans two artboards or lies on an artboard that has no page, when no page art lies inside its box, when that page art is inside a page group with a clip, mask, transparency or appearance, when the object holds a frame of threaded type, when the page art uses a pattern, image or swatch that the page lacks or that differs from the editing data's, or when the page art doesn't carry its transparency (#4806). The layers' art is also compared with the page (by lightness, so colours written as their CMYK equivalents compare alike, and by whether a pixel is inked at all); the page is used when they differ by more than 5% (away from type, when all the type is made from the text document), where one draws an object the other doesn't (away from type, whose lines may be laid out afresh), and when an EPS whose page is its art's box has art printed outside it (#735). A `.ai` is not compared with its page, and its PDF part is not imported, when its text document makes the type of every text object (at least one shows, and none is drawn by the appearance of the layer or group it is in), no object is unread, no placed file has a second placement, no live envelope keeps its drawn art, it declares no large canvas, and its artboards are its pages' trim boxes one for one, in points or in the first page's `UserUnit`: it opens from its layers, with the bleed of its pages' bleed boxes. When they differ because some objects draw differently (an object in another color, or one that only one of them draws), each top-level object of the layers that holds such a difference comes in as a group of the page's objects inside its box and the layers stay, with a warning that names the layer or sublayer of each such object as the Layers panel shows it (`<Layer>` for one without a name) and how many came in from it; an export or Save As to the file's own path then needs `acknowledgeLoss: true`, and a wrap object replaced this way keeps its wrap options. The file still comes in as its page when only edges or type differ, when a difference lies outside every top-level object, when more than half of the top-level objects or more than 64 hold one, when such an object is or holds type or holds a wrap object inside a group, when the page's type of a text object that stays lies inside such an object's box, when the page's art can't replace such an object for one of the reasons above for an unread object, when matching the differences to the objects would take too much work, or when the result still differs from the page. `editingData: "always"` keeps the objects as read, and placed files at the other point their data gives are tried as well. An EPS whose page is its art's box keeps that page when it comes in through its layers, not the editing data's artboard, and a text object counts as drawn by the page by its colours, not only its lightness, so a red stroke stacked over a dark red one stays (#1102). `textAs: "outlines"` opens a `.ai` whose type shows from its PDF part, which has the outlines; `editingData: false` opens any of them as its page or PDF part only, for print pipelines (#735). A file whose import left something out (hidden text, art or layers) is never written over by an export or Save As to its own path unless `acknowledgeLoss: true` (`convert --replace-lossy`), so the original keeps what the document lacks. Where a `.ai` can't be read that way (or its layers are turned off in the import options), we read its PDF-compatible part, so Illustrator-only live objects arrive as appearance, and plain groups arrive ungrouped: that part draws each object on its own and marks only layers, clipping groups and groups with opacity, blending or a mask (those come back). Art outside the artboards isn't in that part at all (Illustrator's PDF part leaves it out), so it doesn't open; the import says so in a note (#472). Its pages still go where the editing data puts the artboards (a grid stays a grid), with the art on each, when it has as many artboards as pages, of the same sizes (#1068); the page of the artboard `CropAreaActive` names is then the active artboard. A `.ai` whose editing data has artboards but no layers also opens on that page under the same check, and its pages stay where they are. A `.ai` whose PDF part's pages are cropped to its art (each page the box of all the art, which is the editing data's bounding box) instead of its artboards opens from its layers, with its own artboards, where they draw as that page does. Its pages are laid out so that art one of them draws past its artboard (notes beside a design, which the part doesn't clip) doesn't lie over the page before it in the row, where it was taken for that page's art: the check against the editing data then found art its layers don't have there and opened the file as its PDF part, without the art outside the artboards. That part also has no paragraphs: area type is written line by line, and comes back as area type only where its font is installed and lays the lines out with the same breaks, else as a point type object per line (#508). Art off the page that a PDF does draw opens on the pasteboard.
 the app's own editing copy of a file (an EPS after its `%%EOF`, a `.ai`'s `AIPrivateData` streams, a PDF's `AIPDFPrivateData` streams when it was saved with the editing data (#868), Zstandard or zlib, the EPS's in ASCII85) is not documented as a whole. VectorCraft reads its structure: layers and sublayers (names, order, visibility, lock, printing, preview, dimming, colour), groups as they were nested, compound paths (painted by their last path, or the last painted one, with the paths of groups inside them kept as their paths: #1410), clipping groups and layer clipping (several clipping paths in a clipping group, a layer or an opacity mask's art clip to their intersection, and a compound path of clipping paths stays one clip; clipping paths that would nest the art past the document's 32 levels stop the editing data from being read: #5789), object names, hidden and locked objects, fills and strokes (grey, CMYK, RGB, named and spot colours, spot colours defined in Lab with their Lab values (#1032), global process colours as global swatches at their tint; a stroke of width 0, `0 w`, on a path, a gradient-filled path, legacy type or in an art style comes in as a 0.25 pt hairline, as from PDF: #1671), linear and radial gradients, pattern fills with their patterns as pattern swatches (#1025), gradient and pattern names in the file up to their first newline (a name that another swatch, or a gradient or pattern defined earlier, already has is numbered "Sky 2"; a name without a newline is kept, and when another swatch has it, the pattern's swatch, or a named color sharing a gradient or pattern swatch's name, is numbered the same way), opacity, blend modes, isolation and knockout, embedded images where their matrix puts them, rotated ones too (#2269), with their alpha channel (CMYK images keep their ink amounts, as they do when a `.ai` opens from its PDF part, and an alpha channel that hides part of a CMYK image becomes a grayscale opacity mask), placed (linked) files as linked images in their place, each showing the low-resolution preview the file keeps of it until its file is found or relinked in the Links panel (#1264), with the folder the file keeps relative to the document's, where the link is looked for when its path is gone, guides, and every artboard where it is, with its center mark, cross hairs, video safe areas and video ruler pixel aspect ratio. VectorCraft reads `CropAreaActive`, an `/Int` in the dictionary that holds the artboard array, as the index of the active artboard in that array, and the file opens with that artboard active; without it, or when it names no artboard that opens, the first artboard is active. It also reads the Document Raster Effects Settings (resolution, color model, background, anti-alias, clipping mask, Add Around Object and Preserve Spot Colors), the author from the header's `%%For` (an EPS's own header when the editing data's has none), swatches for the header's `%%CMYKCustomColor` and `%%RGBCustomColor` colors that the document has none of, and `%%TemplateBox` in older files; a setting with a value of another type or out of range keeps its default. Objects on Path groups open live, with their path, their objects in order along it, Pivot and Rotate; one with a dragged spacing or other options opens as a plain group. A gradient with stops in the middle runs its whole ramp across its shape, and a gradient object does not pass its fill to the next path (#1390). An object whose art style is one fill and one stroke at most (solid colours, its own gradient, a variable-width profile) with Drop Shadow, Inner Glow, Outer Glow, Feather, Round Corners, Scribble, Offset Path, Outline Object, Outline Stroke, Convert to Shape, Tweak (only when it moves nothing), Pucker & Bloat at 0 or Bas Relief (read from its settings block: [raster effects reference](https://helpx.adobe.com/illustrator/desktop/special-effects-styles/apply-filter-effects/raster-effects-reference.html), [Photoshop File Formats Specification](https://www.adobe.com/devnet-apps/photoshop/fileformatashtml/), [scripting the filter gallery](https://community.adobe.com/questions-712/scripting-support-for-the-filter-gallery-1064646)) comes in as itself with them and their saved settings. A path, compound path or group (not a clipping group) whose only effect is Transform (not with copies or Random) or a Free Distort whose corners make a parallelogram comes in as itself with it too, when neither it nor anything in it paints with a gradient or pattern and everything in it is a path, compound path or group with no opacity mask and no effects of its own; Transform that scales, rotates or reflects needs nothing in it to be stroked. Twist as the only effect is read the same way on an unstroked path or compound path whose segments are all straight. One with more, other effects (Zig Zag, a Pucker & Bloat of another amount, a Free Distort with other corners), an effect setting that is not read (an unknown key, a missing or out-of-range value, a Scribble with a color of its own), dashes aligned to corners, a brush other than a Calligraphic or Art one, a Calligraphic brush with settings of its own or an angle that follows the path, or an Art brush other than the ones described next comes in as its drawn look (a group named after it). Objects in a symbol defined before the file's art styles section, as newer files write it, take the same styles as the layers' objects. A path with a Calligraphic brush otherwise comes in as the path, the brush on its stroke at the stroke's weight, which scales the brush (#372), and so does a path with an Art brush, whose weight scales the art across the path, when all of these hold: the brush stretches its art along the path, unflipped, at 100% in Tints; the path's settings are the brush's own, with no entry that isn't read, no variable width and no effects; its stroke isn't a swatch; and the art is paths, compound paths and groups in solid fills, with no strokes, masks or effects, and has some length along the path. A stroke takes the brush the Brushes panel keeps under its name, and one whose name the panel doesn't keep comes in as its drawn look. Type with an Art brush keeps its drawn look under the type. A Calligraphic brush's Pressure, Tilt, Bearing and Rotation come in as those channels (a 6D Art Pen's brushes vary with the pressure, the bearing and the barrel's rotation); its Stylus Wheel varies at random. The file's Calligraphic, Scatter, Art and Bristle brushes replace the default ones in the Brushes panel, in the file's order, also when the file comes in as its PDF part (a brush library has no layers); pattern brushes and brushes it can't read are left out with a note. When the file opens from its layers, the spot colors in the art of each brush that comes in become swatches, and that art's colors count toward the document's color mode, as a pattern's do; a spot color that the page's art, a pattern or a symbol also defines keeps the value defined there. Type keeps its art style as a live appearance whatever its stack (an Art brush aside), so it can be retyped: each fill and stroke of the style's stack (solid colours, gradients and pattern fills, placed as the drawn look places them) with its own opacity, blend mode and effects, the effects on the whole object, and where the characters paint among them; the effects read are Warp, Offset Path, Outline Object, Outline Stroke, Transform (with copies, Transform Objects, Transform Patterns and Scale Strokes & Effects; not with Random), Free Distort, Pucker & Bloat, Twist, Zig Zag, Tweak (only when it moves nothing, the file holding none of its random outline), Drop Shadow, Inner Glow, Outer Glow, Feather, Round Corners, Scribble, Gaussian Blur, Bas Relief (its detail, smoothness and light direction from its settings block, or the effect's defaults when the style holds no settings block; a settings block that isn't read keeps the drawn look) and Convert to Shape, and a style with others, or with an effect setting that isn't read, keeps the type's drawn look. Convert to Shape keeps its Rectangle, Rounded Rectangle or Ellipse, its Absolute or Relative size (a relative size in the file is added to each side) and its corner radius; a relative Ellipse, or a setting that isn't read, keeps the drawn look. The page's drawing of such a style isn't held to look like VectorCraft's where its drawn look lay. Gradients take their matrix (`Xm`, radials and skewed ones too), focal point and the order of stops sharing a ramp point; gradient meshes, a clipping path's own fill and its stroke, and the artboards' names are read too. `editingData: "always"` (`convert --editing-data`) opens a `.ai` or an Illustrator EPS from its editing data even where it draws differently from its page, which can be older, with a note. Type is made from the file's text document, whole and editable, shown or not: point type (its frame's matrix, which newer files leave out when it is neither turned nor scaled, read as none), area type (a story in several frames as threaded type) and type on a path, with its characters, fonts, size, leading, tracking, scaling, baseline shift, fill and stroke (grey, RGB or CMYK), alignment, indents and paragraph spacing (a character attribute a run doesn't set comes from its character style, then the style that one is based on, then the document's defaults); area type keeps its frame's Area Type Options rows and columns, the gutter between rows and the gutter between columns, and its first baseline (Fixed, Cap Height, Leading or x Height) with its minimum; the page's drawing of it (often in pieces) is left out. Vertical type keeps its orientation, its columns from right to left, and a run set to Tate-chu-yoko keeps that setting. When it makes the type of every text object that shows, the page's type is only compared with it, each text object keeps its own group, frame and layer, and a line break inside a paragraph stays one. Where it can't make a text object's type (a frame of another kind), that text object takes the page's type where the text document puts its lines, or else what is left of the page's type in painting order (no group around it); the page's type where made type draws stays that type's, and hidden type is left out with a note. Text wrap is read too: an object whose dictionary has the wrap options (offset and Invert Wrap), or any graphic of a legacy wraparound group (`*w` … `*W`, before or after its type, with no offset), is a wrap object, and area type below it in its layer flows around it when the file opens, threaded type included (#2763). Kerning, underline and the other character and paragraph options aren't read yet. A `.ai` saved without PDF compatibility (a placeholder page) opens from its editing data alone, its point type, area type and type on a path made from the text document. A `.ai` whose PDF part shows only text isn't taken for that placeholder when its page states an art, trim or bleed box: it opens from its editing data alone where that reads, else from its PDF part (#1387). A `.ai` whose PDF part draws nothing at all (an empty page, with or without those boxes) opens from its editing data alone where that reads too: there is no page art to check its layers against, and the empty page would lose all of it. Text objects with an appearance keep their own text and frame, type of hidden layers stays hidden, and type on later artboards lands on its text objects (#1391); area type whose frame is too short for a line of the fallback font shows its first line (the frame is made taller, with a warning in the open result) (#1392). Symbols are read into the Symbols panel, in the file's symbol list order, with their art, their registration point and the instances in their art, and their instances come in live with their matrix, name, hide, lock, opacity, blending mode, isolation, knockout and opacity mask; a symbol whose art isn't read whole (type, placed files, an image it leaves out or anything else it doesn't read) isn't kept. Symbols are read only with the layers: a file that comes in as its page or PDF part (editing data with no layers, layers that can't be read, or any of the cases below) opens with an empty Symbols panel. Instances of symbols it can't read, instances with appearance changes of their own (a dynamic symbol's), pattern fills whose pattern it can't read, placed files the data keeps no preview of and anything else it doesn't read make the file come in as its page (on a layer that doesn't show, they are left out of that layer), with a warning saying what. An unread object on a shown layer whose box can be found instead comes in as a group of the page's objects inside that box, named after it, with the rest of the layers and groups kept and a warning listing what came in as the page's art; the file still comes in as its page when live art or another unread object shares that page art, when the object spans two artboards or lies on an artboard that has no page, when no page art lies inside its box, when that page art is inside a page group with a clip, mask, transparency or appearance, when the object holds a frame of threaded type, when the page art uses a pattern, image or swatch that the page lacks or that differs from the editing data's, or when the page art doesn't carry its transparency (#4806). The layers' art is also compared with the page (by lightness, so colours written as their CMYK equivalents compare alike, and by whether a pixel is inked at all); the page is used when they differ by more than 5% (away from type, when all the type is made from the text document), where one draws an object the other doesn't (away from type, whose lines may be laid out afresh), and when an EPS whose page is its art's box has art printed outside it (#735). A `.ai` is not compared with its page, and its PDF part is not imported, when its text document makes the type of every text object (at least one shows, and none is drawn by the appearance of the layer or group it is in), no object is unread, no placed file has a second placement, no live envelope keeps its drawn art, it declares no large canvas, and its artboards are its pages' trim boxes one for one, in points or in the first page's `UserUnit`: it opens from its layers, with the bleed of its pages' bleed boxes. When they differ because some objects draw differently (an object in another color, or one that only one of them draws), each top-level object of the layers that holds such a difference comes in as a group of the page's objects inside its box and the layers stay, with a warning that names the layer or sublayer of each such object as the Layers panel shows it (`<Layer>` for one without a name) and how many came in from it; an export or Save As to the file's own path then needs `acknowledgeLoss: true`, and a wrap object replaced this way keeps its wrap options. The file still comes in as its page when only edges or type differ, when a difference lies outside every top-level object, when more than half of the top-level objects or more than 64 hold one, when such an object is or holds type or holds a wrap object inside a group, when the page's type of a text object that stays lies inside such an object's box, when the page's art can't replace such an object for one of the reasons above for an unread object, when matching the differences to the objects would take too much work, or when the result still differs from the page. `editingData: "always"` keeps the objects as read, and placed files at the other point their data gives are tried as well. An EPS whose page is its art's box keeps that page when it comes in through its layers, not the editing data's artboard, and a text object counts as drawn by the page by its colours, not only its lightness, so a red stroke stacked over a dark red one stays (#1102). `textAs: "outlines"` opens a `.ai` whose type shows from its PDF part, which has the outlines; `editingData: false` opens any of them as its page or PDF part only, for print pipelines (#735). A file whose import left something out (hidden text, art or layers) is never written over by an export or Save As to its own path unless `acknowledgeLoss: true` (`convert --replace-lossy`), so the original keeps what the document lacks. Where a `.ai` can't be read that way (or its layers are turned off in the import options), we read its PDF-compatible part, so Illustrator-only live objects arrive as appearance, and plain groups arrive ungrouped: that part draws each object on its own and marks only layers, clipping groups and groups with opacity, blending or a mask (those come back). Art outside the artboards isn't in that part at all (Illustrator's PDF part leaves it out), so it doesn't open; the import says so in a note (#472). Its pages still go where the editing data puts the artboards (a grid stays a grid), with the art on each, when it has as many artboards as pages, of the same sizes (#1068); the page of the artboard `CropAreaActive` names is then the active artboard. A `.ai` whose editing data has artboards but no layers also opens on that page under the same check, and its pages stay where they are. A `.ai` whose PDF part's pages are cropped to its art (each page the box of all the art, which is the editing data's bounding box) instead of its artboards opens from its layers, with its own artboards, where they draw as that page does. Its pages are laid out so that art one of them draws past its artboard (notes beside a design, which the part doesn't clip) doesn't lie over the page before it in the row, where it was taken for that page's art: the check against the editing data then found art its layers don't have there and opened the file as its PDF part, without the art outside the artboards. That part also has no paragraphs: area type is written line by line, and comes back as area type only where its font is installed and lays the lines out with the same breaks, else as a point type object per line (#508). Art off the page that a PDF does draw opens on the pasteboard.
 the app's own editing copy of a file (an EPS after its `%%EOF`, a `.ai`'s `AIPrivateData` streams, a PDF's `AIPDFPrivateData` streams when it was saved with the editing data (#868), Zstandard or zlib, the EPS's in ASCII85) is not documented as a whole. VectorCraft reads its structure: layers and sublayers (names, order, visibility, lock, printing, preview, dimming, colour), groups as they were nested, compound paths (painted by their last path, or the last painted one, with the paths of groups inside them kept as their paths: #1410), clipping groups and layer clipping (several clipping paths in a clipping group, a layer or an opacity mask's art clip to their intersection, and a compound path of clipping paths stays one clip; clipping paths that would nest the art past the document's 32 levels stop the editing data from being read: #5789), object names, hidden and locked objects, fills and strokes (grey, CMYK, RGB, named and spot colours, spot colours defined in Lab with their Lab values (#1032), global process colours as global swatches at their tint; a stroke of width 0, `0 w`, on a path, a gradient-filled path, legacy type or in an art style comes in as a 0.25 pt hairline, as from PDF: #1671), linear and radial gradients, pattern fills with their patterns as pattern swatches (#1025), gradient and pattern names in the file up to their first newline (a name that another swatch, or a gradient or pattern defined earlier, already has is numbered "Sky 2"; a name without a newline is kept, and when another swatch has it, the pattern's swatch, or a named color sharing a gradient or pattern swatch's name, is numbered the same way), opacity, blend modes, isolation and knockout, embedded images where their matrix puts them, rotated ones too (#2269), with their alpha channel (CMYK images keep their ink amounts, as they do when a `.ai` opens from its PDF part, and an alpha channel that hides part of a CMYK image becomes a grayscale opacity mask), placed (linked) files as linked images in their place, each showing the low-resolution preview the file keeps of it until its file is found or relinked in the Links panel (#1264), with the folder the file keeps relative to the document's, where the link is looked for when its path is gone, guides, and every artboard where it is, with its center mark, cross hairs, video safe areas and video ruler pixel aspect ratio. VectorCraft reads `CropAreaActive`, an `/Int` in the dictionary that holds the artboard array, as the index of the active artboard in that array, and the file opens with that artboard active; without it, or when it names no artboard that opens, the first artboard is active. It also reads the Document Raster Effects Settings (resolution, color model, background, anti-alias, clipping mask, Add Around Object and Preserve Spot Colors), the author from the header's `%%For` (an EPS's own header when the editing data's has none), swatches for the header's `%%CMYKCustomColor` and `%%RGBCustomColor` colors that the document has none of, and `%%TemplateBox` in older files; a setting with a value of another type or out of range keeps its default. Objects on Path groups open live, with their path, their objects in order along it, Pivot and Rotate; one with a dragged spacing or other options opens as a plain group. A gradient with stops in the middle runs its whole ramp across its shape, and a gradient object does not pass its fill to the next path (#1390). An object whose art style is one fill and one stroke at most (solid colours, its own gradient, a variable-width profile) with Drop Shadow, Inner Glow, Outer Glow, Feather, Round Corners, Scribble, Offset Path, Outline Object, Outline Stroke, Convert to Shape, Tweak (only when it moves nothing), Pucker & Bloat at 0 or Bas Relief (read from its settings block: [raster effects reference](https://helpx.adobe.com/illustrator/desktop/special-effects-styles/apply-filter-effects/raster-effects-reference.html), [Photoshop File Formats Specification](https://www.adobe.com/devnet-apps/photoshop/fileformatashtml/), [scripting the filter gallery](https://community.adobe.com/questions-712/scripting-support-for-the-filter-gallery-1064646)) comes in as itself with them and their saved settings. A path, compound path or group (not a clipping group) whose only effect is Transform (not with copies or Random) or a Free Distort whose corners make a parallelogram comes in as itself with it too, when neither it nor anything in it paints with a gradient or pattern and everything in it is a path, compound path or group with no opacity mask and no effects of its own; Transform that scales, rotates or reflects needs nothing in it to be stroked. Twist as the only effect is read the same way on an unstroked path or compound path whose segments are all straight. One with more, other effects (Zig Zag, a Pucker & Bloat of another amount, a Free Distort with other corners), an effect setting that is not read (an unknown key, a missing or out-of-range value, a Scribble with a color of its own), dashes aligned to corners, a brush other than a Calligraphic one, or a Calligraphic brush with settings of its own or an angle that follows the path comes in as its drawn look (a group named after it). A path with a Calligraphic brush otherwise comes in as the path, the brush on its stroke at the stroke's weight, which scales the brush (#372). A Calligraphic brush's Pressure, Tilt, Bearing and Rotation come in as those channels (a 6D Art Pen's brushes vary with the pressure, the bearing and the barrel's rotation); its Stylus Wheel varies at random. The file's Calligraphic, Scatter, Art and Bristle brushes replace the default ones in the Brushes panel, in the file's order, also when the file comes in as its PDF part (a brush library has no layers); pattern brushes and brushes it can't read are left out with a note. When the file opens from its layers, the spot colors in the art of each brush that comes in become swatches, and that art's colors count toward the document's color mode, as a pattern's do; a spot color that the page's art, a pattern or a symbol also defines keeps the value defined there. Type keeps its art style as a live appearance whatever its stack, so it can be retyped: each fill and stroke of the style's stack (solid colours, gradients and pattern fills, placed as the drawn look places them) with its own opacity, blend mode and effects, the effects on the whole object, and where the characters paint among them; the effects read are Warp, Offset Path, Outline Object, Outline Stroke, Transform (with copies, Transform Objects, Transform Patterns and Scale Strokes & Effects; not with Random), Free Distort, Pucker & Bloat, Twist, Zig Zag, Tweak (only when it moves nothing, the file holding none of its random outline), Drop Shadow, Inner Glow, Outer Glow, Feather, Round Corners, Scribble, Gaussian Blur, Bas Relief (its detail, smoothness and light direction from its settings block, or the effect's defaults when the style holds no settings block; a settings block that isn't read keeps the drawn look) and Convert to Shape, and a style with others, or with an effect setting that isn't read, keeps the type's drawn look. Convert to Shape keeps its Rectangle, Rounded Rectangle or Ellipse, its Absolute or Relative size (a relative size in the file is added to each side) and its corner radius; a relative Ellipse, or a setting that isn't read, keeps the drawn look. The page's drawing of such a style isn't held to look like VectorCraft's where its drawn look lay. Gradients take their matrix (`Xm`, radials and skewed ones too), focal point and the order of stops sharing a ramp point; gradient meshes, a clipping path's own fill and its stroke, and the artboards' names are read too. `editingData: "always"` (`convert --editing-data`) opens a `.ai` or an Illustrator EPS from its editing data even where it draws differently from its page, which can be older, with a note. Type is made from the file's text document, whole and editable, shown or not: point type (its frame's matrix, which newer files leave out when it is neither turned nor scaled, read as none), area type (a story in several frames as threaded type) and type on a path, with its characters, fonts, size, leading, tracking, scaling, baseline shift, fill and stroke (grey, RGB or CMYK), alignment, indents and paragraph spacing (a character attribute a run doesn't set comes from its character style, then the style that one is based on, then the document's defaults); area type keeps its frame's Area Type Options rows and columns, the gutter between rows and the gutter between columns, and its first baseline (Fixed, Cap Height, Leading or x Height) with its minimum; the page's drawing of it (often in pieces) is left out. Vertical type keeps its orientation, its columns from right to left, and a run set to Tate-chu-yoko keeps that setting. When it makes the type of every text object that shows, the page's type is only compared with it, each text object keeps its own group, frame and layer, and a line break inside a paragraph stays one. Where it can't make a text object's type (a frame of another kind), that text object takes the page's type where the text document puts its lines, or else what is left of the page's type in painting order (no group around it); the page's type where made type draws stays that type's, and hidden type is left out with a note. Text wrap is read too: an object whose dictionary has the wrap options (offset and Invert Wrap), or any graphic of a legacy wraparound group (`*w` … `*W`, before or after its type, with no offset), is a wrap object, and area type below it in its layer flows around it when the file opens, threaded type included (#2763). Kerning, underline and the other character and paragraph options aren't read yet. A `.ai` saved without PDF compatibility (a placeholder page) opens from its editing data alone, its point type, area type and type on a path made from the text document. A `.ai` whose PDF part shows only text isn't taken for that placeholder when its page states an art, trim or bleed box: it opens from its editing data alone where that reads, else from its PDF part (#1387). A `.ai` whose PDF part draws nothing at all (an empty page, with or without those boxes) opens from its editing data alone where that reads too: there is no page art to check its layers against, and the empty page would lose all of it. Text objects with an appearance keep their own text and frame, type of hidden layers stays hidden, and type on later artboards lands on its text objects (#1391); area type whose frame is too short for a line of the fallback font shows its first line (the frame is made taller, with a warning in the open result) (#1392). Symbols are read into the Symbols panel, in the file's symbol list order, with their art, their registration point and the instances in their art, and their instances come in live with their matrix, name, hide, lock, opacity, blending mode, isolation, knockout and opacity mask; a symbol whose art isn't read whole (type, placed files, an image it leaves out or anything else it doesn't read) isn't kept. Symbols are read only with the layers: a file that comes in as its page or PDF part (editing data with no layers, layers that can't be read, or any of the cases below) opens with an empty Symbols panel. Instances of symbols it can't read, instances with appearance changes of their own (a dynamic symbol's), pattern fills whose pattern it can't read, placed files the data keeps no preview of and anything else it doesn't read make the file come in as its page (on a layer that doesn't show, they are left out of that layer), with a warning saying what. An unread object on a shown layer whose box can be found instead comes in as a group of the page's objects inside that box, named after it, with the rest of the layers and groups kept and a warning listing what came in as the page's art; the file still comes in as its page when live art or another unread object shares that page art, when the object spans two artboards or lies on an artboard that has no page, when no page art lies inside its box, when that page art is inside a page group with a clip, mask, transparency or appearance, when the object holds a frame of threaded type, when the page art uses a pattern, image or swatch that the page lacks or that differs from the editing data's, or when the page art doesn't carry its transparency (#4806). The layers' art is also compared with the page (by lightness, so colours written as their CMYK equivalents compare alike, and by whether a pixel is inked at all); the page is used when they differ by more than 5% (away from type, when all the type is made from the text document), where one draws an object the other doesn't (away from type, whose lines may be laid out afresh), and when an EPS whose page is its art's box has art printed outside it (#735). A `.ai` is not compared with its page, and its PDF part is not imported, when its text document makes the type of every text object (at least one shows, and none is drawn by the appearance of the layer or group it is in), no object is unread, no placed file has a second placement, no live envelope keeps its drawn art, it declares no large canvas, and its artboards are its pages' trim boxes one for one, in points or in the first page's `UserUnit`: it opens from its layers, with the bleed of its pages' bleed boxes. When they differ because some objects draw differently (an object in another color, or one that only one of them draws), each top-level object of the layers that holds such a difference comes in as a group of the page's objects inside its box and the layers stay, with a warning that names the layer or sublayer of each such object as the Layers panel shows it (`<Layer>` for one without a name) and how many came in from it; an export or Save As to the file's own path then needs `acknowledgeLoss: true`, and a wrap object replaced this way keeps its wrap options. The file still comes in as its page when only edges or type differ, when a difference lies outside every top-level object, when more than half of the top-level objects or more than 64 hold one, when such an object is or holds type or holds a wrap object inside a group, when the page's type of a text object that stays lies inside such an object's box, when the page's art can't replace such an object for one of the reasons above for an unread object, when matching the differences to the objects would take too much work, or when the result still differs from the page. `editingData: "always"` keeps the objects as read, and placed files at the other point their data gives are tried as well. An EPS whose page is its art's box keeps that page when it comes in through its layers, not the editing data's artboard, and a text object counts as drawn by the page by its colours, not only its lightness, so a red stroke stacked over a dark red one stays (#1102). `textAs: "outlines"` opens a `.ai` whose type shows from its PDF part, which has the outlines; `editingData: false` opens any of them as its page or PDF part only, for print pipelines (#735). A file whose import left something out (hidden text, art or layers) is never written over by an export or Save As to its own path unless `acknowledgeLoss: true` (`convert --replace-lossy`), so the original keeps what the document lacks. Where a `.ai` can't be read that way (or its layers are turned off in the import options), we read its PDF-compatible part, so Illustrator-only live objects arrive as appearance, and plain groups arrive ungrouped: that part draws each object on its own and marks only layers, clipping groups and groups with opacity, blending or a mask (those come back). Art outside the artboards isn't in that part at all (Illustrator's PDF part leaves it out), so it doesn't open; the import says so in a note (#472). Its pages still go where the editing data puts the artboards (a grid stays a grid), with the art on each, when it has as many artboards as pages, of the same sizes (#1068); the page of the artboard `CropAreaActive` names is then the active artboard. A `.ai` whose editing data has artboards but no layers also opens on that page under the same check, and its pages stay where they are. A `.ai` whose PDF part's pages are cropped to its art (each page the box of all the art, which is the editing data's bounding box) instead of its artboards opens from its layers, with its own artboards, where they draw as that page does. Its pages are laid out so that art one of them draws past its artboard (notes beside a design, which the part doesn't clip) doesn't lie over the page before it in the row, where it was taken for that page's art: the check against the editing data then found art its layers don't have there and opened the file as its PDF part, without the art outside the artboards. That part also has no paragraphs: area type is written line by line, and comes back as area type only where its font is installed and lays the lines out with the same breaks, else as a point type object per line (#508). Art off the page that a PDF does draw opens on the pasteboard.
-the app's own editing copy of a file (an EPS after its `%%EOF`, a `.ai`'s `AIPrivateData` streams, a PDF's `AIPDFPrivateData` streams when it was saved with the editing data (#868), Zstandard or zlib, the EPS's in ASCII85) is not documented as a whole. VectorCraft reads its structure: layers and sublayers (names, order, visibility, lock, printing, preview, dimming, colour), groups as they were nested, compound paths (painted by their last path, or the last painted one, with the paths of groups inside them kept as their paths: #1410), clipping groups and layer clipping (several clipping paths in a clipping group, a layer or an opacity mask's art clip to their intersection, and a compound path of clipping paths stays one clip; clipping paths that would nest the art past the document's 32 levels stop the editing data from being read: #5789), object names, hidden and locked objects, fills and strokes (grey, CMYK, RGB, named and spot colours, spot colours defined in Lab with their Lab values (#1032), global process colours as global swatches at their tint; a stroke of width 0, `0 w`, on a path, a gradient-filled path, legacy type or in an art style comes in as a 0.25 pt hairline, as from PDF: #1671), linear and radial gradients, pattern fills with their patterns as pattern swatches (#1025), gradient and pattern names in the file up to their first newline (a name that another swatch, or a gradient or pattern defined earlier, already has is numbered "Sky 2"; a name without a newline is kept, and when another swatch has it, the pattern's swatch, or a named color sharing a gradient or pattern swatch's name, is numbered the same way), opacity, blend modes, isolation and knockout, embedded images where their matrix puts them, rotated ones too (#2269), with their alpha channel (CMYK images keep their ink amounts, as they do when a `.ai` opens from its PDF part, and an alpha channel that hides part of a CMYK image becomes a grayscale opacity mask), placed (linked) files as linked images in their place, each showing the low-resolution preview the file keeps of it until its file is found or relinked in the Links panel (#1264), with the folder the file keeps relative to the document's, where the link is looked for when its path is gone, guides, and every artboard where it is, with its center mark, cross hairs, video safe areas and video ruler pixel aspect ratio. VectorCraft reads `CropAreaActive`, an `/Int` in the dictionary that holds the artboard array, as the index of the active artboard in that array, and the file opens with that artboard active; without it, or when it names no artboard that opens, the first artboard is active. It also reads the Document Raster Effects Settings (resolution, color model, background, anti-alias, clipping mask, Add Around Object and Preserve Spot Colors), the author from the header's `%%For` (an EPS's own header when the editing data's has none), swatches for the header's `%%CMYKCustomColor` and `%%RGBCustomColor` colors that the document has none of, and `%%TemplateBox` in older files; a setting with a value of another type or out of range keeps its default. Objects on Path groups open live, with their path, their objects in order along it, Pivot and Rotate; one with a dragged spacing or other options opens as a plain group. A gradient with stops in the middle runs its whole ramp across its shape, and a gradient object does not pass its fill to the next path (#1390). An object whose art style is one fill and one stroke at most (solid colours, its own gradient, a variable-width profile) with Drop Shadow, Inner Glow, Outer Glow, Feather, Round Corners, Scribble, Offset Path, Outline Object, Outline Stroke, Convert to Shape, Tweak (only when it moves nothing), Pucker & Bloat at 0 or Bas Relief (read from its settings block: [raster effects reference](https://helpx.adobe.com/illustrator/desktop/special-effects-styles/apply-filter-effects/raster-effects-reference.html), [Photoshop File Formats Specification](https://www.adobe.com/devnet-apps/photoshop/fileformatashtml/), [scripting the filter gallery](https://community.adobe.com/questions-712/scripting-support-for-the-filter-gallery-1064646)) comes in as itself with them and their saved settings. A path, compound path or group (not a clipping group) whose only effect is Transform (not with copies or Random) or a Free Distort whose corners make a parallelogram comes in as itself with it too, when neither it nor anything in it paints with a gradient or pattern and everything in it is a path, compound path or group with no opacity mask and no effects of its own; Transform that scales, rotates or reflects needs nothing in it to be stroked. Twist as the only effect is read the same way on an unstroked path or compound path whose segments are all straight. One with more, other effects (Zig Zag, a Pucker & Bloat of another amount, a Free Distort with other corners), an effect setting that is not read (an unknown key, a missing or out-of-range value, a Scribble with a color of its own), dashes aligned to corners, a brush other than a Calligraphic one, or a Calligraphic brush with settings of its own or an angle that follows the path comes in as its drawn look (a group named after it). Objects in a symbol defined before the file's art styles section, as newer files write it, take the same styles as the layers' objects. A path with a Calligraphic brush otherwise comes in as the path, the brush on its stroke at the stroke's weight, which scales the brush (#372). A Calligraphic brush's Pressure, Tilt, Bearing and Rotation come in as those channels (a 6D Art Pen's brushes vary with the pressure, the bearing and the barrel's rotation); its Stylus Wheel varies at random. The file's Calligraphic, Scatter, Art and Bristle brushes replace the default ones in the Brushes panel, in the file's order, also when the file comes in as its PDF part (a brush library has no layers); pattern brushes and brushes it can't read are left out with a note. Type keeps its art style as a live appearance whatever its stack, so it can be retyped: each fill and stroke of the style's stack (solid colours, gradients and pattern fills, placed as the drawn look places them) with its own opacity, blend mode and effects, the effects on the whole object, and where the characters paint among them; the effects read are Warp, Offset Path, Outline Object, Outline Stroke, Transform (with copies, Transform Objects, Transform Patterns and Scale Strokes & Effects; not with Random), Free Distort, Pucker & Bloat, Twist, Zig Zag, Tweak (only when it moves nothing, the file holding none of its random outline), Drop Shadow, Inner Glow, Outer Glow, Feather, Round Corners, Scribble, Gaussian Blur, Bas Relief (its detail, smoothness and light direction from its settings block, or the effect's defaults when the style holds no settings block; a settings block that isn't read keeps the drawn look) and Convert to Shape, and a style with others, or with an effect setting that isn't read, keeps the type's drawn look. Convert to Shape keeps its Rectangle, Rounded Rectangle or Ellipse, its Absolute or Relative size (a relative size in the file is added to each side) and its corner radius; a relative Ellipse, or a setting that isn't read, keeps the drawn look. The page's drawing of such a style isn't held to look like VectorCraft's where its drawn look lay. Gradients take their matrix (`Xm`, radials and skewed ones too), focal point and the order of stops sharing a ramp point; gradient meshes, a clipping path's own fill and its stroke, and the artboards' names are read too. `editingData: "always"` (`convert --editing-data`) opens a `.ai` or an Illustrator EPS from its editing data even where it draws differently from its page, which can be older, with a note. Type is made from the file's text document, whole and editable, shown or not: point type (its frame's matrix, which newer files leave out when it is neither turned nor scaled, read as none), area type (a story in several frames as threaded type) and type on a path, with its characters, fonts, size, leading, tracking, scaling, baseline shift, fill and stroke (grey, RGB or CMYK), alignment, indents and paragraph spacing (a character attribute a run doesn't set comes from its character style, then the style that one is based on, then the document's defaults); area type keeps its frame's Area Type Options rows and columns, the gutter between rows and the gutter between columns, and its first baseline (Fixed, Cap Height, Leading or x Height) with its minimum; type on a path keeps its frame's Type on a Path effect, Align to Path and Flip (a frame whose options set key 6 to true keeps their defaults), and the first frame's Spacing is fitted from the file's layout, not read from the dialog's value; the distance from the path under Align to Path comes from VectorCraft's font metrics, and on Arial at 24 pt it differs from the distance the file keeps by 1.1 pt (Ascender), 0.3 pt (Center) and 2.7 pt (Descender); the fit under Gravity does not reproduce the file's layout, and its glyphs can lie up to 7.4 pt from the positions the file keeps; the page's drawing of it (often in pieces) is left out. Vertical type keeps its orientation, its columns from right to left, and a run set to Tate-chu-yoko keeps that setting. When it makes the type of every text object that shows, the page's type is only compared with it, each text object keeps its own group, frame and layer, and a line break inside a paragraph stays one. Where it can't make a text object's type (a frame of another kind), that text object takes the page's type where the text document puts its lines, or else what is left of the page's type in painting order (no group around it); the page's type where made type draws stays that type's, and hidden type is left out with a note. Text wrap is read too: an object whose dictionary has the wrap options (offset and Invert Wrap), or any graphic of a legacy wraparound group (`*w` … `*W`, before or after its type, with no offset), is a wrap object, and area type below it in its layer flows around it when the file opens, threaded type included (#2763). Kerning, underline and the other character and paragraph options aren't read yet. A `.ai` saved without PDF compatibility (a placeholder page) opens from its editing data alone, its point type, area type and type on a path made from the text document. A `.ai` whose PDF part shows only text isn't taken for that placeholder when its page states an art, trim or bleed box: it opens from its editing data alone where that reads, else from its PDF part (#1387). A `.ai` whose PDF part draws nothing at all (an empty page, with or without those boxes) opens from its editing data alone where that reads too: there is no page art to check its layers against, and the empty page would lose all of it. Text objects with an appearance keep their own text and frame, type of hidden layers stays hidden, and type on later artboards lands on its text objects (#1391); area type whose frame is too short for a line of the fallback font shows its first line (the frame is made taller, with a warning in the open result) (#1392). Symbols are read into the Symbols panel, in the file's symbol list order, with their art, their registration point and the instances in their art, and their instances come in live with their matrix, name, hide, lock, opacity, blending mode, isolation, knockout and opacity mask; a symbol whose art isn't read whole (type, placed files, an image it leaves out or anything else it doesn't read) isn't kept. Symbols are read only with the layers: a file that comes in as its page or PDF part (editing data with no layers, layers that can't be read, or any of the cases below) opens with an empty Symbols panel. Instances of symbols it can't read, instances with appearance changes of their own (a dynamic symbol's), pattern fills whose pattern it can't read, placed files the data keeps no preview of and anything else it doesn't read make the file come in as its page (on a layer that doesn't show, they are left out of that layer), with a warning saying what. An unread object on a shown layer whose box can be found instead comes in as a group of the page's objects inside that box, named after it, with the rest of the layers and groups kept and a warning listing what came in as the page's art; the file still comes in as its page when live art or another unread object shares that page art, when the object spans two artboards or lies on an artboard that has no page, when no page art lies inside its box, when that page art is inside a page group with a clip, mask, transparency or appearance, when the object holds a frame of threaded type, when the page art uses a pattern, image or swatch that the page lacks or that differs from the editing data's, or when the page art doesn't carry its transparency (#4806). The layers' art is also compared with the page (by lightness, so colours written as their CMYK equivalents compare alike, and by whether a pixel is inked at all); the page is used when they differ by more than 5% (away from type, when all the type is made from the text document), where one draws an object the other doesn't (away from type, whose lines may be laid out afresh), and when an EPS whose page is its art's box has art printed outside it (#735). A `.ai` is not compared with its page, and its PDF part is not imported, when its text document makes the type of every text object (at least one shows, and none is drawn by the appearance of the layer or group it is in), no object is unread, no placed file has a second placement, no live envelope keeps its drawn art, it declares no large canvas, and its artboards are its pages' trim boxes one for one, in points or in the first page's `UserUnit`: it opens from its layers, with the bleed of its pages' bleed boxes. When they differ because some objects draw differently (an object in another color, or one that only one of them draws), each top-level object of the layers that holds such a difference comes in as a group of the page's objects inside its box and the layers stay, with a warning that names the layer or sublayer of each such object as the Layers panel shows it (`<Layer>` for one without a name) and how many came in from it; an export or Save As to the file's own path then needs `acknowledgeLoss: true`, and a wrap object replaced this way keeps its wrap options. The file still comes in as its page when only edges or type differ, when a difference lies outside every top-level object, when more than half of the top-level objects or more than 64 hold one, when such an object is or holds type or holds a wrap object inside a group, when the page's type of a text object that stays lies inside such an object's box, when the page's art can't replace such an object for one of the reasons above for an unread object, when matching the differences to the objects would take too much work, or when the result still differs from the page. `editingData: "always"` keeps the objects as read, and placed files at the other point their data gives are tried as well. An EPS whose page is its art's box keeps that page when it comes in through its layers, not the editing data's artboard, and a text object counts as drawn by the page by its colours, not only its lightness, so a red stroke stacked over a dark red one stays (#1102). `textAs: "outlines"` opens a `.ai` whose type shows from its PDF part, which has the outlines; `editingData: false` opens any of them as its page or PDF part only, for print pipelines (#735). A file whose import left something out (hidden text, art or layers) is never written over by an export or Save As to its own path unless `acknowledgeLoss: true` (`convert --replace-lossy`), so the original keeps what the document lacks. Where a `.ai` can't be read that way (or its layers are turned off in the import options), we read its PDF-compatible part, so Illustrator-only live objects arrive as appearance, and plain groups arrive ungrouped: that part draws each object on its own and marks only layers, clipping groups and groups with opacity, blending or a mask (those come back). Art outside the artboards isn't in that part at all (Illustrator's PDF part leaves it out), so it doesn't open; the import says so in a note (#472). Its pages still go where the editing data puts the artboards (a grid stays a grid), with the art on each, when it has as many artboards as pages, of the same sizes (#1068); the page of the artboard `CropAreaActive` names is then the active artboard. A `.ai` whose editing data has artboards but no layers also opens on that page under the same check, and its pages stay where they are. A `.ai` whose PDF part's pages are cropped to its art (each page the box of all the art, which is the editing data's bounding box) instead of its artboards opens from its layers, with its own artboards, where they draw as that page does. Its pages are laid out so that art one of them draws past its artboard (notes beside a design, which the part doesn't clip) doesn't lie over the page before it in the row, where it was taken for that page's art: the check against the editing data then found art its layers don't have there and opened the file as its PDF part, without the art outside the artboards. That part also has no paragraphs: area type is written line by line, and comes back as area type only where its font is installed and lays the lines out with the same breaks, else as a point type object per line (#508). Art off the page that a PDF does draw opens on the pasteboard.
-the app's own editing copy of a file (an EPS after its `%%EOF`, a `.ai`'s `AIPrivateData` streams, a PDF's `AIPDFPrivateData` streams when it was saved with the editing data (#868), Zstandard or zlib, the EPS's in ASCII85) is not documented as a whole. VectorCraft reads its structure: layers and sublayers (names, order, visibility, lock, printing, preview, dimming, colour), groups as they were nested, compound paths (painted by their last path, or the last painted one, with the paths of groups inside them kept as their paths: #1410), clipping groups and layer clipping (several clipping paths in a clipping group, a layer or an opacity mask's art clip to their intersection, and a compound path of clipping paths stays one clip; clipping paths that would nest the art past the document's 32 levels stop the editing data from being read: #5789), object names, hidden and locked objects, fills and strokes (grey, CMYK, RGB, named and spot colours, spot colours defined in Lab with their Lab values (#1032), global process colours as global swatches at their tint; a stroke of width 0, `0 w`, on a path, a gradient-filled path, legacy type or in an art style comes in as a 0.25 pt hairline, as from PDF: #1671), linear and radial gradients, pattern fills with their patterns as pattern swatches (#1025), gradient and pattern names in the file up to their first newline (a name that another swatch, or a gradient or pattern defined earlier, already has is numbered "Sky 2"; a name without a newline is kept, and when another swatch has it, the pattern's swatch, or a named color sharing a gradient or pattern swatch's name, is numbered the same way), opacity, blend modes, isolation and knockout, embedded images where their matrix puts them, rotated ones too (#2269), with their alpha channel (CMYK images keep their ink amounts, as they do when a `.ai` opens from its PDF part, and an alpha channel that hides part of a CMYK image becomes a grayscale opacity mask), placed (linked) files as linked images in their place, each showing the low-resolution preview the file keeps of it until its file is found or relinked in the Links panel (#1264), with the folder the file keeps relative to the document's, where the link is looked for when its path is gone, guides, and every artboard where it is, with its center mark, cross hairs, video safe areas and video ruler pixel aspect ratio. VectorCraft reads `CropAreaActive`, an `/Int` in the dictionary that holds the artboard array, as the index of the active artboard in that array, and the file opens with that artboard active; without it, or when it names no artboard that opens, the first artboard is active. It also reads the Document Raster Effects Settings (resolution, color model, background, anti-alias, clipping mask, Add Around Object and Preserve Spot Colors), the author from the header's `%%For` (an EPS's own header when the editing data's has none), swatches for the header's `%%CMYKCustomColor` and `%%RGBCustomColor` colors that the document has none of, and `%%TemplateBox` in older files; a setting with a value of another type or out of range keeps its default. Objects on Path groups open live, with their path, their objects in order along it, Pivot and Rotate; one with a dragged spacing or other options opens as a plain group. A gradient with stops in the middle runs its whole ramp across its shape, and a gradient object does not pass its fill to the next path (#1390). An object whose art style is one fill and one stroke at most (solid colours, its own gradient, a variable-width profile) with Drop Shadow, Inner Glow, Outer Glow, Feather, Round Corners, Scribble, Offset Path, Outline Object, Outline Stroke, Convert to Shape, Tweak (only when it moves nothing), Pucker & Bloat at 0 or Bas Relief (read from its settings block: [raster effects reference](https://helpx.adobe.com/illustrator/desktop/special-effects-styles/apply-filter-effects/raster-effects-reference.html), [Photoshop File Formats Specification](https://www.adobe.com/devnet-apps/photoshop/fileformatashtml/), [scripting the filter gallery](https://community.adobe.com/questions-712/scripting-support-for-the-filter-gallery-1064646)) comes in as itself with them and their saved settings. A path, compound path or group (not a clipping group) whose only effect is Transform (not with copies or Random) or a Free Distort whose corners make a parallelogram comes in as itself with it too, when neither it nor anything in it paints with a gradient or pattern and everything in it is a path, compound path or group with no opacity mask and no effects of its own; Transform that scales, rotates or reflects needs nothing in it to be stroked. Twist as the only effect is read the same way on an unstroked path or compound path whose segments are all straight. One with more, other effects (Zig Zag, a Pucker & Bloat of another amount, a Free Distort with other corners), an effect setting that is not read (an unknown key, a missing or out-of-range value, a Scribble with a color of its own), dashes aligned to corners, a brush other than a Calligraphic or Art one, a Calligraphic brush with settings of its own or an angle that follows the path, or an Art brush other than the ones described next comes in as its drawn look (a group named after it). A path with a Calligraphic brush otherwise comes in as the path, the brush on its stroke at the stroke's weight, which scales the brush (#372), and so does a path with an Art brush, whose weight scales the art across the path, when all of these hold: the brush stretches its art along the path, unflipped, at 100% in Tints; the path's settings are the brush's own, with no entry that isn't read, no variable width and no effects; its stroke isn't a swatch; and the art is paths, compound paths and groups in solid fills, with no strokes, masks or effects, and has some length along the path. A stroke takes the brush the Brushes panel keeps under its name, and one whose name the panel doesn't keep comes in as its drawn look. Type with an Art brush keeps its drawn look under the type. A Calligraphic brush's Pressure, Tilt, Bearing and Rotation come in as those channels (a 6D Art Pen's brushes vary with the pressure, the bearing and the barrel's rotation); its Stylus Wheel varies at random. The file's Calligraphic, Scatter, Art and Bristle brushes replace the default ones in the Brushes panel, in the file's order, also when the file comes in as its PDF part (a brush library has no layers); pattern brushes and brushes it can't read are left out with a note. Type keeps its art style as a live appearance whatever its stack (an Art brush aside), so it can be retyped: each fill and stroke of the style's stack (solid colours, gradients and pattern fills, placed as the drawn look places them) with its own opacity, blend mode and effects, the effects on the whole object, and where the characters paint among them; the effects read are Warp, Offset Path, Outline Object, Outline Stroke, Transform (with copies, Transform Objects, Transform Patterns and Scale Strokes & Effects; not with Random), Free Distort, Pucker & Bloat, Twist, Zig Zag, Tweak (only when it moves nothing, the file holding none of its random outline), Drop Shadow, Inner Glow, Outer Glow, Feather, Round Corners, Scribble, Gaussian Blur, Bas Relief (its detail, smoothness and light direction from its settings block, or the effect's defaults when the style holds no settings block; a settings block that isn't read keeps the drawn look) and Convert to Shape, and a style with others, or with an effect setting that isn't read, keeps the type's drawn look. Convert to Shape keeps its Rectangle, Rounded Rectangle or Ellipse, its Absolute or Relative size (a relative size in the file is added to each side) and its corner radius; a relative Ellipse, or a setting that isn't read, keeps the drawn look. The page's drawing of such a style isn't held to look like VectorCraft's where its drawn look lay. Gradients take their matrix (`Xm`, radials and skewed ones too), focal point and the order of stops sharing a ramp point; gradient meshes, a clipping path's own fill and its stroke, and the artboards' names are read too. `editingData: "always"` (`convert --editing-data`) opens a `.ai` or an Illustrator EPS from its editing data even where it draws differently from its page, which can be older, with a note. Type is made from the file's text document, whole and editable, shown or not: point type (its frame's matrix, which newer files leave out when it is neither turned nor scaled, read as none), area type (a story in several frames as threaded type) and type on a path, with its characters, fonts, size, leading, tracking, scaling, baseline shift, fill and stroke (grey, RGB or CMYK), alignment, indents and paragraph spacing (a character attribute a run doesn't set comes from its character style, then the style that one is based on, then the document's defaults); area type keeps its frame's Area Type Options rows and columns, the gutter between rows and the gutter between columns, and its first baseline (Fixed, Cap Height, Leading or x Height) with its minimum; type on a path keeps its frame's Type on a Path effect, Align to Path and Flip (a frame whose options set key 6 to true keeps their defaults), and the first frame's Spacing is fitted from the file's layout, not read from the dialog's value; the distance from the path under Align to Path comes from VectorCraft's font metrics, and on Arial at 24 pt it differs from the distance the file keeps by 1.1 pt (Ascender), 0.3 pt (Center) and 2.7 pt (Descender); the fit under Gravity does not reproduce the file's layout, and its glyphs can lie up to 7.4 pt from the positions the file keeps; the page's drawing of it (often in pieces) is left out. Vertical type keeps its orientation, its columns from right to left, and a run set to Tate-chu-yoko keeps that setting. When it makes the type of every text object that shows, the page's type is only compared with it, each text object keeps its own group, frame and layer, and a line break inside a paragraph stays one. Where it can't make a text object's type (a frame of another kind), that text object takes the page's type where the text document puts its lines, or else what is left of the page's type in painting order (no group around it); the page's type where made type draws stays that type's, and hidden type is left out with a note. Text wrap is read too: an object whose dictionary has the wrap options (offset and Invert Wrap), or any graphic of a legacy wraparound group (`*w` … `*W`, before or after its type, with no offset), is a wrap object, and area type below it in its layer flows around it when the file opens, threaded type included (#2763). Kerning, underline and the other character and paragraph options aren't read yet. A `.ai` saved without PDF compatibility (a placeholder page) opens from its editing data alone, its point type, area type and type on a path made from the text document. A `.ai` whose PDF part shows only text isn't taken for that placeholder when its page states an art, trim or bleed box: it opens from its editing data alone where that reads, else from its PDF part (#1387). A `.ai` whose PDF part draws nothing at all (an empty page, with or without those boxes) opens from its editing data alone where that reads too: there is no page art to check its layers against, and the empty page would lose all of it. Text objects with an appearance keep their own text and frame, type of hidden layers stays hidden, and type on later artboards lands on its text objects (#1391); area type whose frame is too short for a line of the fallback font shows its first line (the frame is made taller, with a warning in the open result) (#1392). Symbols are read into the Symbols panel, in the file's symbol list order, with their art, their registration point and the instances in their art, and their instances come in live with their matrix, name, hide, lock, opacity, blending mode, isolation, knockout and opacity mask; a symbol whose art isn't read whole (type, placed files, an image it leaves out or anything else it doesn't read) isn't kept. Symbols are read only with the layers: a file that comes in as its page or PDF part (editing data with no layers, layers that can't be read, or any of the cases below) opens with an empty Symbols panel. Instances of symbols it can't read, instances with appearance changes of their own (a dynamic symbol's), pattern fills whose pattern it can't read, placed files the data keeps no preview of and anything else it doesn't read make the file come in as its page (on a layer that doesn't show, they are left out of that layer), with a warning saying what. An unread object on a shown layer whose box can be found instead comes in as a group of the page's objects inside that box, named after it, with the rest of the layers and groups kept and a warning listing what came in as the page's art; the file still comes in as its page when live art or another unread object shares that page art, when the object spans two artboards or lies on an artboard that has no page, when no page art lies inside its box, when that page art is inside a page group with a clip, mask, transparency or appearance, when the object holds a frame of threaded type, when the page art uses a pattern, image or swatch that the page lacks or that differs from the editing data's, or when the page art doesn't carry its transparency (#4806). The layers' art is also compared with the page (by lightness, so colours written as their CMYK equivalents compare alike, and by whether a pixel is inked at all); the page is used when they differ by more than 5% (away from type, when all the type is made from the text document), where one draws an object the other doesn't (away from type, whose lines may be laid out afresh), and when an EPS whose page is its art's box has art printed outside it (#735). A `.ai` is not compared with its page, and its PDF part is not imported, when its text document makes the type of every text object (at least one shows, and none is drawn by the appearance of the layer or group it is in), no object is unread, no placed file has a second placement, no live envelope keeps its drawn art, it declares no large canvas, and its artboards are its pages' trim boxes one for one, in points or in the first page's `UserUnit`: it opens from its layers, with the bleed of its pages' bleed boxes. When they differ because some objects draw differently (an object in another color, or one that only one of them draws), each top-level object of the layers that holds such a difference comes in as a group of the page's objects inside its box and the layers stay, with a warning that names the layer or sublayer of each such object as the Layers panel shows it (`<Layer>` for one without a name) and how many came in from it; an export or Save As to the file's own path then needs `acknowledgeLoss: true`, and a wrap object replaced this way keeps its wrap options. The file still comes in as its page when only edges or type differ, when a difference lies outside every top-level object, when more than half of the top-level objects or more than 64 hold one, when such an object is or holds type or holds a wrap object inside a group, when the page's type of a text object that stays lies inside such an object's box, when the page's art can't replace such an object for one of the reasons above for an unread object, when matching the differences to the objects would take too much work, or when the result still differs from the page. `editingData: "always"` keeps the objects as read, and placed files at the other point their data gives are tried as well. An EPS whose page is its art's box keeps that page when it comes in through its layers, not the editing data's artboard, and a text object counts as drawn by the page by its colours, not only its lightness, so a red stroke stacked over a dark red one stays (#1102). `textAs: "outlines"` opens a `.ai` whose type shows from its PDF part, which has the outlines; `editingData: false` opens any of them as its page or PDF part only, for print pipelines (#735). A file whose import left something out (hidden text, art or layers) is never written over by an export or Save As to its own path unless `acknowledgeLoss: true` (`convert --replace-lossy`), so the original keeps what the document lacks. Where a `.ai` can't be read that way (or its layers are turned off in the import options), we read its PDF-compatible part, so Illustrator-only live objects arrive as appearance, and plain groups arrive ungrouped: that part draws each object on its own and marks only layers, clipping groups and groups with opacity, blending or a mask (those come back). Art outside the artboards isn't in that part at all (Illustrator's PDF part leaves it out), so it doesn't open; the import says so in a note (#472). Its pages still go where the editing data puts the artboards (a grid stays a grid), with the art on each, when it has as many artboards as pages, of the same sizes (#1068); the page of the artboard `CropAreaActive` names is then the active artboard. A `.ai` whose editing data has artboards but no layers also opens on that page under the same check, and its pages stay where they are. A `.ai` whose PDF part's pages are cropped to its art (each page the box of all the art, which is the editing data's bounding box) instead of its artboards opens from its layers, with its own artboards, where they draw as that page does. Its pages are laid out so that art one of them draws past its artboard (notes beside a design, which the part doesn't clip) doesn't lie over the page before it in the row, where it was taken for that page's art: the check against the editing data then found art its layers don't have there and opened the file as its PDF part, without the art outside the artboards. That part also has no paragraphs: area type is written line by line, and comes back as area type only where its font is installed and lays the lines out with the same breaks, else as a point type object per line (#508). Art off the page that a PDF does draw opens on the pasteboard.
-the app's own editing copy of a file (an EPS after its `%%EOF`, a `.ai`'s `AIPrivateData` streams, a PDF's `AIPDFPrivateData` streams when it was saved with the editing data (#868), Zstandard or zlib, the EPS's in ASCII85) is not documented as a whole. VectorCraft reads its structure: layers and sublayers (names, order, visibility, lock, printing, preview, dimming, colour), groups as they were nested, compound paths (painted by their last path, or the last painted one, with the paths of groups inside them kept as their paths: #1410), clipping groups and layer clipping (several clipping paths in a clipping group, a layer or an opacity mask's art clip to their intersection, and a compound path of clipping paths stays one clip; clipping paths that would nest the art past the document's 32 levels stop the editing data from being read: #5789), object names, hidden and locked objects, fills and strokes (grey, CMYK, RGB, named and spot colours, spot colours defined in Lab with their Lab values (#1032), global process colours as global swatches at their tint; a stroke of width 0, `0 w`, on a path, a gradient-filled path, legacy type or in an art style comes in as a 0.25 pt hairline, as from PDF: #1671), linear and radial gradients, pattern fills with their patterns as pattern swatches (#1025), gradient and pattern names in the file up to their first newline (a name that another swatch, or a gradient or pattern defined earlier, already has is numbered "Sky 2"; a name without a newline is kept, and when another swatch has it, the pattern's swatch, or a named color sharing a gradient or pattern swatch's name, is numbered the same way), opacity, blend modes, isolation and knockout, embedded images where their matrix puts them, rotated ones too (#2269), with their alpha channel (CMYK images keep their ink amounts, as they do when a `.ai` opens from its PDF part, and an alpha channel that hides part of a CMYK image becomes a grayscale opacity mask), placed (linked) files as linked images in their place, each showing the low-resolution preview the file keeps of it until its file is found or relinked in the Links panel (#1264), with the folder the file keeps relative to the document's, where the link is looked for when its path is gone, guides, and every artboard where it is, with its center mark, cross hairs, video safe areas and video ruler pixel aspect ratio. VectorCraft reads `CropAreaActive`, an `/Int` in the dictionary that holds the artboard array, as the index of the active artboard in that array, and the file opens with that artboard active; without it, or when it names no artboard that opens, the first artboard is active. It also reads the Document Raster Effects Settings (resolution, color model, background, anti-alias, clipping mask, Add Around Object and Preserve Spot Colors), the author from the header's `%%For` (an EPS's own header when the editing data's has none), swatches for the header's `%%CMYKCustomColor` and `%%RGBCustomColor` colors that the document has none of, and `%%TemplateBox` in older files; a setting with a value of another type or out of range keeps its default. Objects on Path groups open live, with their path, their objects in order along it, Pivot and Rotate; one with a dragged spacing or other options opens as a plain group. A gradient with stops in the middle runs its whole ramp across its shape, and a gradient object does not pass its fill to the next path (#1390). An object whose art style is one fill and one stroke at most (solid colours, its own gradient, a variable-width profile) with Drop Shadow, Inner Glow, Outer Glow, Feather, Round Corners, Scribble, Offset Path, Outline Object, Outline Stroke, Convert to Shape, Tweak (only when it moves nothing), Pucker & Bloat at 0 or Bas Relief (read from its settings block: [raster effects reference](https://helpx.adobe.com/illustrator/desktop/special-effects-styles/apply-filter-effects/raster-effects-reference.html), [Photoshop File Formats Specification](https://www.adobe.com/devnet-apps/photoshop/fileformatashtml/), [scripting the filter gallery](https://community.adobe.com/questions-712/scripting-support-for-the-filter-gallery-1064646)) comes in as itself with them and their saved settings. A path, compound path or group (not a clipping group) whose only effect is Transform (not with copies or Random) or a Free Distort whose corners make a parallelogram comes in as itself with it too, when neither it nor anything in it paints with a gradient or pattern and everything in it is a path, compound path or group with no opacity mask and no effects of its own; Transform that scales, rotates or reflects needs nothing in it to be stroked. Twist as the only effect is read the same way on an unstroked path or compound path whose segments are all straight. One with more, other effects (Zig Zag, a Pucker & Bloat of another amount, a Free Distort with other corners), an effect setting that is not read (an unknown key, a missing or out-of-range value, a Scribble with a color of its own), dashes aligned to corners, a brush other than a Calligraphic one, or a Calligraphic brush with settings of its own or an angle that follows the path comes in as its drawn look (a group named after it). A path with a Calligraphic brush otherwise comes in as the path, the brush on its stroke at the stroke's weight, which scales the brush (#372). A Calligraphic brush's Pressure, Tilt, Bearing and Rotation come in as those channels (a 6D Art Pen's brushes vary with the pressure, the bearing and the barrel's rotation); its Stylus Wheel varies at random. The file's Calligraphic, Scatter, Art and Bristle brushes replace the default ones in the Brushes panel, in the file's order, also when the file comes in as its PDF part (a brush library has no layers); pattern brushes and brushes it can't read are left out with a note. Type keeps its art style as a live appearance whatever its stack, so it can be retyped: each fill and stroke of the style's stack (solid colours, gradients and pattern fills, placed as the drawn look places them) with its own opacity, blend mode and effects, the effects on the whole object, and where the characters paint among them; the effects read are Warp, Offset Path, Outline Object, Outline Stroke, Transform (with copies, Transform Objects, Transform Patterns and Scale Strokes & Effects; not with Random), Free Distort, Pucker & Bloat, Twist, Zig Zag, Tweak (only when it moves nothing, the file holding none of its random outline), Drop Shadow, Inner Glow, Outer Glow, Feather, Round Corners, Scribble, Gaussian Blur, Bas Relief (its detail, smoothness and light direction from its settings block, or the effect's defaults when the style holds no settings block; a settings block that isn't read keeps the drawn look) and Convert to Shape, and a style with others, or with an effect setting that isn't read, keeps the type's drawn look. Convert to Shape keeps its Rectangle, Rounded Rectangle or Ellipse, its Absolute or Relative size (a relative size in the file is added to each side) and its corner radius; a relative Ellipse, or a setting that isn't read, keeps the drawn look. The page's drawing of such a style isn't held to look like VectorCraft's where its drawn look lay. Gradients take their matrix (`Xm`, radials and skewed ones too), focal point and the order of stops sharing a ramp point; gradient meshes, a clipping path's own fill and its stroke, and the artboards' names are read too. `editingData: "always"` (`convert --editing-data`) opens a `.ai` or an Illustrator EPS from its editing data even where it draws differently from its page, which can be older, with a note. Type is made from the file's text document, whole and editable, shown or not: point type (its frame's matrix, which newer files leave out when it is neither turned nor scaled, read as none), area type (a story in several frames as threaded type) and type on a path, with its characters, fonts, size, leading, tracking, scaling, baseline shift, fill and stroke (grey, RGB or CMYK), alignment, indents and paragraph spacing (a character attribute a run doesn't set comes from its character style, then the style that one is based on, then the document's defaults); area type keeps its frame's Area Type Options rows and columns, the gutter between rows and the gutter between columns, and its first baseline (Fixed, Cap Height, Leading or x Height) with its minimum; type on a path keeps its frame's Type on a Path effect, Align to Path and Flip, and the first frame's Spacing is fitted from the file's layout, not read from the dialog's value; the distance from the path under Align to Path comes from VectorCraft's font metrics, and on Arial at 24 pt it differs from the distance the file keeps by 1.1 pt (Ascender), 0.3 pt (Center) and 2.7 pt (Descender); the fit under Gravity does not reproduce the file's layout, and its glyphs can lie up to 7.4 pt from the positions the file keeps; the page's drawing of it (often in pieces) is left out. Vertical type keeps its orientation, its columns from right to left, and a run set to Tate-chu-yoko keeps that setting. When it makes the type of every text object that shows, the page's type is only compared with it, each text object keeps its own group, frame and layer, and a line break inside a paragraph stays one. Where it can't make a text object's type (a frame of another kind), that text object takes the page's type where the text document puts its lines, or else what is left of the page's type in painting order (no group around it); the page's type where made type draws stays that type's, and hidden type is left out with a note. Text wrap is read too: an object whose dictionary has the wrap options (offset and Invert Wrap), or any graphic of a legacy wraparound group (`*w` … `*W`, before or after its type, with no offset), is a wrap object, and area type below it in its layer flows around it when the file opens, threaded type included (#2763). Kerning, underline and the other character and paragraph options aren't read yet. A `.ai` saved without PDF compatibility (a placeholder page) opens from its editing data alone, its point type, area type and type on a path made from the text document. A `.ai` whose PDF part shows only text isn't taken for that placeholder when its page states an art, trim or bleed box: it opens from its editing data alone where that reads, else from its PDF part (#1387). A `.ai` whose PDF part draws nothing at all (an empty page, with or without those boxes) opens from its editing data alone where that reads too: there is no page art to check its layers against, and the empty page would lose all of it. Text objects with an appearance keep their own text and frame, type of hidden layers stays hidden, and type on later artboards lands on its text objects (#1391); area type whose frame is too short for a line of the fallback font shows its first line (the frame is made taller, with a warning in the open result) (#1392). Symbols are read into the Symbols panel, in the file's symbol list order, with their art, their registration point and the instances in their art, and their instances come in live with their matrix, name, hide, lock, opacity, blending mode, isolation, knockout and opacity mask; a symbol whose art isn't read whole (type, placed files, an image it leaves out or anything else it doesn't read) isn't kept. Symbols are read only with the layers: a file that comes in as its page or PDF part (editing data with no layers, layers that can't be read, or any of the cases below) opens with an empty Symbols panel. Instances of symbols it can't read, instances with appearance changes of their own (a dynamic symbol's), pattern fills whose pattern it can't read, placed files the data keeps no preview of and anything else it doesn't read make the file come in as its page (on a layer that doesn't show, they are left out of that layer), with a warning saying what. An unread object on a shown layer whose box can be found instead comes in as a group of the page's objects inside that box, named after it, with the rest of the layers and groups kept and a warning listing what came in as the page's art; the file still comes in as its page when live art or another unread object shares that page art, when the object spans two artboards or lies on an artboard that has no page, when no page art lies inside its box, when that page art is inside a page group with a clip, mask, transparency or appearance, when the object holds a frame of threaded type, when the page art uses a pattern, image or swatch that the page lacks or that differs from the editing data's, or when the page art doesn't carry its transparency (#4806). The layers' art is also compared with the page (by lightness, so colours written as their CMYK equivalents compare alike, and by whether a pixel is inked at all); the page is used when they differ by more than 5% (away from type, when all the type is made from the text document), where one draws an object the other doesn't (away from type, whose lines may be laid out afresh), and when an EPS whose page is its art's box has art printed outside it (#735). A `.ai` is not compared with its page, and its PDF part is not imported, when its text document makes the type of every text object (at least one shows, and none is drawn by the appearance of the layer or group it is in), no object is unread, no placed file has a second placement, no live envelope keeps its drawn art, it declares no large canvas, and its artboards are its pages' trim boxes one for one, in points or in the first page's `UserUnit`: it opens from its layers, with the bleed of its pages' bleed boxes. When they differ because some objects draw differently (an object in another color, or one that only one of them draws), each top-level object of the layers that holds such a difference comes in as a group of the page's objects inside its box and the layers stay, with a warning that names the layer or sublayer of each such object as the Layers panel shows it (`<Layer>` for one without a name) and how many came in from it; an export or Save As to the file's own path then needs `acknowledgeLoss: true`, and a wrap object replaced this way keeps its wrap options. The file still comes in as its page when only edges or type differ, when a difference lies outside every top-level object, when more than half of the top-level objects or more than 64 hold one, when such an object is or holds type or holds a wrap object inside a group, when the page's type of a text object that stays lies inside such an object's box, when the page's art can't replace such an object for one of the reasons above for an unread object, when matching the differences to the objects would take too much work, or when the result still differs from the page. `editingData: "always"` keeps the objects as read, and placed files at the other point their data gives are tried as well. An EPS whose page is its art's box keeps that page when it comes in through its layers, not the editing data's artboard, and a text object counts as drawn by the page by its colours, not only its lightness, so a red stroke stacked over a dark red one stays (#1102). `textAs: "outlines"` opens a `.ai` whose type shows from its PDF part, which has the outlines; `editingData: false` opens any of them as its page or PDF part only, for print pipelines (#735). A file whose import left something out (hidden text, art or layers) is never written over by an export or Save As to its own path unless `acknowledgeLoss: true` (`convert --replace-lossy`), so the original keeps what the document lacks. Where a `.ai` can't be read that way (or its layers are turned off in the import options), we read its PDF-compatible part, so Illustrator-only live objects arrive as appearance, and plain groups arrive ungrouped: that part draws each object on its own and marks only layers, clipping groups and groups with opacity, blending or a mask (those come back). Art outside the artboards isn't in that part at all (Illustrator's PDF part leaves it out), so it doesn't open; the import says so in a note (#472). Its pages still go where the editing data puts the artboards (a grid stays a grid), with the art on each, when it has as many artboards as pages, of the same sizes (#1068); the page of the artboard `CropAreaActive` names is then the active artboard. A `.ai` whose editing data has artboards but no layers also opens on that page under the same check, and its pages stay where they are. A `.ai` whose PDF part's pages are cropped to its art (each page the box of all the art, which is the editing data's bounding box) instead of its artboards opens from its layers, with its own artboards, where they draw as that page does. Its pages are laid out so that art one of them draws past its artboard (notes beside a design, which the part doesn't clip) doesn't lie over the page before it in the row, where it was taken for that page's art: the check against the editing data then found art its layers don't have there and opened the file as its PDF part, without the art outside the artboards. That part also has no paragraphs: area type is written line by line, and comes back as area type only where its font is installed and lays the lines out with the same breaks, else as a point type object per line (#508). Art off the page that a PDF does draw opens on the pasteboard.
+the app's own editing copy of a file (an EPS after its `%%EOF`, a `.ai`'s `AIPrivateData` streams, a PDF's `AIPDFPrivateData` streams when it was saved with the editing data (#868), Zstandard or zlib, the EPS's in ASCII85) is not documented as a whole. VectorCraft reads its structure: layers and sublayers (names, order, visibility, lock, printing, preview, dimming, colour), groups as they were nested, compound paths (painted by their last path, or the last painted one, with the paths of groups inside them kept as their paths: #1410), clipping groups and layer clipping (several clipping paths in a clipping group, a layer or an opacity mask's art clip to their intersection, and a compound path of clipping paths stays one clip; clipping paths that would nest the art past the document's 32 levels stop the editing data from being read: #5789), object names, hidden and locked objects, fills and strokes (grey, CMYK, RGB, named and spot colours, spot colours defined in Lab with their Lab values (#1032), global process colours as global swatches at their tint; a stroke of width 0, `0 w`, on a path, a gradient-filled path, legacy type or in an art style comes in as a 0.25 pt hairline, as from PDF: #1671), linear and radial gradients, pattern fills with their patterns as pattern swatches (#1025), gradient and pattern names in the file up to their first newline (a name that another swatch, or a gradient or pattern defined earlier, already has is numbered "Sky 2"; a name without a newline is kept, and when another swatch has it, the pattern's swatch, or a named color sharing a gradient or pattern swatch's name, is numbered the same way), opacity, blend modes, isolation and knockout, embedded images where their matrix puts them, rotated ones too (#2269), with their alpha channel (CMYK images keep their ink amounts, as they do when a `.ai` opens from its PDF part, and an alpha channel that hides part of a CMYK image becomes a grayscale opacity mask), placed (linked) files as linked images in their place, each showing the low-resolution preview the file keeps of it until its file is found or relinked in the Links panel (#1264), with the folder the file keeps relative to the document's, where the link is looked for when its path is gone, guides, and every artboard where it is, with its center mark, cross hairs, video safe areas and video ruler pixel aspect ratio. VectorCraft reads `CropAreaActive`, an `/Int` in the dictionary that holds the artboard array, as the index of the active artboard in that array, and the file opens with that artboard active; without it, or when it names no artboard that opens, the first artboard is active. It also reads the Document Raster Effects Settings (resolution, color model, background, anti-alias, clipping mask, Add Around Object and Preserve Spot Colors), the author from the header's `%%For` (an EPS's own header when the editing data's has none), swatches for the header's `%%CMYKCustomColor` and `%%RGBCustomColor` colors that the document has none of, and `%%TemplateBox` in older files; a setting with a value of another type or out of range keeps its default. Objects on Path groups open live, with their path, their objects in order along it, Pivot and Rotate; one with a dragged spacing or other options opens as a plain group. A gradient with stops in the middle runs its whole ramp across its shape, and a gradient object does not pass its fill to the next path (#1390). An object whose art style is one fill and one stroke at most (solid colours, its own gradient, a variable-width profile) with Drop Shadow, Inner Glow, Outer Glow, Feather, Round Corners, Scribble, Offset Path, Outline Object, Outline Stroke, Convert to Shape, Tweak (only when it moves nothing), Pucker & Bloat at 0 or Bas Relief (read from its settings block: [raster effects reference](https://helpx.adobe.com/illustrator/desktop/special-effects-styles/apply-filter-effects/raster-effects-reference.html), [Photoshop File Formats Specification](https://www.adobe.com/devnet-apps/photoshop/fileformatashtml/), [scripting the filter gallery](https://community.adobe.com/questions-712/scripting-support-for-the-filter-gallery-1064646)) comes in as itself with them and their saved settings. A path, compound path or group (not a clipping group) whose only effect is Transform (not with copies or Random) or a Free Distort whose corners make a parallelogram comes in as itself with it too, when neither it nor anything in it paints with a gradient or pattern and everything in it is a path, compound path or group with no opacity mask and no effects of its own; Transform that scales, rotates or reflects needs nothing in it to be stroked. Twist as the only effect is read the same way on an unstroked path or compound path whose segments are all straight. One with more, other effects (Zig Zag, a Pucker & Bloat of another amount, a Free Distort with other corners), an effect setting that is not read (an unknown key, a missing or out-of-range value, a Scribble with a color of its own), dashes aligned to corners, a brush other than a Calligraphic one, or a Calligraphic brush with settings of its own or an angle that follows the path comes in as its drawn look (a group named after it). Objects in a symbol defined before the file's art styles section, as newer files write it, take the same styles as the layers' objects. A path with a Calligraphic brush otherwise comes in as the path, the brush on its stroke at the stroke's weight, which scales the brush (#372). A Calligraphic brush's Pressure, Tilt, Bearing and Rotation come in as those channels (a 6D Art Pen's brushes vary with the pressure, the bearing and the barrel's rotation); its Stylus Wheel varies at random. The file's Calligraphic, Scatter, Art and Bristle brushes replace the default ones in the Brushes panel, in the file's order, also when the file comes in as its PDF part (a brush library has no layers); pattern brushes and brushes it can't read are left out with a note. Type keeps its art style as a live appearance whatever its stack, so it can be retyped: each fill and stroke of the style's stack (solid colours, gradients and pattern fills, placed as the drawn look places them) with its own opacity, blend mode and effects, the effects on the whole object, and where the characters paint among them; the effects read are Warp, Offset Path, Outline Object, Outline Stroke, Transform (with copies, Transform Objects, Transform Patterns and Scale Strokes & Effects; not with Random), Free Distort, Pucker & Bloat, Twist, Zig Zag, Tweak (only when it moves nothing, the file holding none of its random outline), Drop Shadow, Inner Glow, Outer Glow, Feather, Round Corners, Scribble, Gaussian Blur, Bas Relief (its detail, smoothness and light direction from its settings block, or the effect's defaults when the style holds no settings block; a settings block that isn't read keeps the drawn look) and Convert to Shape, and a style with others, or with an effect setting that isn't read, keeps the type's drawn look. Convert to Shape keeps its Rectangle, Rounded Rectangle or Ellipse, its Absolute or Relative size (a relative size in the file is added to each side) and its corner radius; a relative Ellipse, or a setting that isn't read, keeps the drawn look. The page's drawing of such a style isn't held to look like VectorCraft's where its drawn look lay. Gradients take their matrix (`Xm`, radials and skewed ones too), focal point and the order of stops sharing a ramp point; gradient meshes, a clipping path's own fill and its stroke, and the artboards' names are read too. `editingData: "always"` (`convert --editing-data`) opens a `.ai` or an Illustrator EPS from its editing data even where it draws differently from its page, which can be older, with a note. Type is made from the file's text document, whole and editable, shown or not: point type (its frame's matrix, which newer files leave out when it is neither turned nor scaled, read as none), area type (a story in several frames as threaded type) and type on a path, with its characters, fonts, size, leading, tracking, scaling, baseline shift, fill and stroke (grey, RGB or CMYK), alignment, indents and paragraph spacing (a character attribute a run doesn't set comes from its character style, then the style that one is based on, then the document's defaults); area type keeps its frame's Area Type Options rows and columns, the gutter between rows and the gutter between columns, and its first baseline (Fixed, Cap Height, Leading or x Height) with its minimum; type on a path keeps its frame's Type on a Path effect, Align to Path and Flip (a frame whose options set key 6 to true keeps their defaults), and the first frame's Spacing is fitted from the file's layout, not read from the dialog's value; the distance from the path under Align to Path is measured for each character at its size and vertical scale (in vertical type, its horizontal scale), from the top of its font's em box (Ascender), half the height of the top of its font's H (Center) or the bottom of its font's bounding box (Descender); the fit under Gravity does not reproduce the file's layout, and its glyphs can lie up to 7.4 pt from the positions the file keeps; the page's drawing of it (often in pieces) is left out. Vertical type keeps its orientation, its columns from right to left, and a run set to Tate-chu-yoko keeps that setting. When it makes the type of every text object that shows, the page's type is only compared with it, each text object keeps its own group, frame and layer, and a line break inside a paragraph stays one. Where it can't make a text object's type (a frame of another kind), that text object takes the page's type where the text document puts its lines, or else what is left of the page's type in painting order (no group around it); the page's type where made type draws stays that type's, and hidden type is left out with a note. Text wrap is read too: an object whose dictionary has the wrap options (offset and Invert Wrap), or any graphic of a legacy wraparound group (`*w` … `*W`, before or after its type, with no offset), is a wrap object, and area type below it in its layer flows around it when the file opens, threaded type included (#2763). Kerning, underline and the other character and paragraph options aren't read yet. A `.ai` saved without PDF compatibility (a placeholder page) opens from its editing data alone, its point type, area type and type on a path made from the text document. A `.ai` whose PDF part shows only text isn't taken for that placeholder when its page states an art, trim or bleed box: it opens from its editing data alone where that reads, else from its PDF part (#1387). A `.ai` whose PDF part draws nothing at all (an empty page, with or without those boxes) opens from its editing data alone where that reads too: there is no page art to check its layers against, and the empty page would lose all of it. Text objects with an appearance keep their own text and frame, type of hidden layers stays hidden, and type on later artboards lands on its text objects (#1391); area type whose frame is too short for a line of the fallback font shows its first line (the frame is made taller, with a warning in the open result) (#1392). Symbols are read into the Symbols panel, in the file's symbol list order, with their art, their registration point and the instances in their art, and their instances come in live with their matrix, name, hide, lock, opacity, blending mode, isolation, knockout and opacity mask; a symbol whose art isn't read whole (type, placed files, an image it leaves out or anything else it doesn't read) isn't kept. Symbols are read only with the layers: a file that comes in as its page or PDF part (editing data with no layers, layers that can't be read, or any of the cases below) opens with an empty Symbols panel. Instances of symbols it can't read, instances with appearance changes of their own (a dynamic symbol's), pattern fills whose pattern it can't read, placed files the data keeps no preview of and anything else it doesn't read make the file come in as its page (on a layer that doesn't show, they are left out of that layer), with a warning saying what. An unread object on a shown layer whose box can be found instead comes in as a group of the page's objects inside that box, named after it, with the rest of the layers and groups kept and a warning listing what came in as the page's art; the file still comes in as its page when live art or another unread object shares that page art, when the object spans two artboards or lies on an artboard that has no page, when no page art lies inside its box, when that page art is inside a page group with a clip, mask, transparency or appearance, when the object holds a frame of threaded type, when the page art uses a pattern, image or swatch that the page lacks or that differs from the editing data's, or when the page art doesn't carry its transparency (#4806). The layers' art is also compared with the page (by lightness, so colours written as their CMYK equivalents compare alike, and by whether a pixel is inked at all); the page is used when they differ by more than 5% (away from type, when all the type is made from the text document), where one draws an object the other doesn't (away from type, whose lines may be laid out afresh), and when an EPS whose page is its art's box has art printed outside it (#735). A `.ai` is not compared with its page, and its PDF part is not imported, when its text document makes the type of every text object (at least one shows, and none is drawn by the appearance of the layer or group it is in), no object is unread, no placed file has a second placement, no live envelope keeps its drawn art, it declares no large canvas, and its artboards are its pages' trim boxes one for one, in points or in the first page's `UserUnit`: it opens from its layers, with the bleed of its pages' bleed boxes. When they differ because some objects draw differently (an object in another color, or one that only one of them draws), each top-level object of the layers that holds such a difference comes in as a group of the page's objects inside its box and the layers stay, with a warning that names the layer or sublayer of each such object as the Layers panel shows it (`<Layer>` for one without a name) and how many came in from it; an export or Save As to the file's own path then needs `acknowledgeLoss: true`, and a wrap object replaced this way keeps its wrap options. The file still comes in as its page when only edges or type differ, when a difference lies outside every top-level object, when more than half of the top-level objects or more than 64 hold one, when such an object is or holds type or holds a wrap object inside a group, when the page's type of a text object that stays lies inside such an object's box, when the page's art can't replace such an object for one of the reasons above for an unread object, when matching the differences to the objects would take too much work, or when the result still differs from the page. `editingData: "always"` keeps the objects as read, and placed files at the other point their data gives are tried as well. An EPS whose page is its art's box keeps that page when it comes in through its layers, not the editing data's artboard, and a text object counts as drawn by the page by its colours, not only its lightness, so a red stroke stacked over a dark red one stays (#1102). `textAs: "outlines"` opens a `.ai` whose type shows from its PDF part, which has the outlines; `editingData: false` opens any of them as its page or PDF part only, for print pipelines (#735). A file whose import left something out (hidden text, art or layers) is never written over by an export or Save As to its own path unless `acknowledgeLoss: true` (`convert --replace-lossy`), so the original keeps what the document lacks. Where a `.ai` can't be read that way (or its layers are turned off in the import options), we read its PDF-compatible part, so Illustrator-only live objects arrive as appearance, and plain groups arrive ungrouped: that part draws each object on its own and marks only layers, clipping groups and groups with opacity, blending or a mask (those come back). Art outside the artboards isn't in that part at all (Illustrator's PDF part leaves it out), so it doesn't open; the import says so in a note (#472). Its pages still go where the editing data puts the artboards (a grid stays a grid), with the art on each, when it has as many artboards as pages, of the same sizes (#1068); the page of the artboard `CropAreaActive` names is then the active artboard. A `.ai` whose editing data has artboards but no layers also opens on that page under the same check, and its pages stay where they are. A `.ai` whose PDF part's pages are cropped to its art (each page the box of all the art, which is the editing data's bounding box) instead of its artboards opens from its layers, with its own artboards, where they draw as that page does. Its pages are laid out so that art one of them draws past its artboard (notes beside a design, which the part doesn't clip) doesn't lie over the page before it in the row, where it was taken for that page's art: the check against the editing data then found art its layers don't have there and opened the file as its PDF part, without the art outside the artboards. That part also has no paragraphs: area type is written line by line, and comes back as area type only where its font is installed and lays the lines out with the same breaks, else as a point type object per line (#508). Art off the page that a PDF does draw opens on the pasteboard.
+the app's own editing copy of a file (an EPS after its `%%EOF`, a `.ai`'s `AIPrivateData` streams, a PDF's `AIPDFPrivateData` streams when it was saved with the editing data (#868), Zstandard or zlib, the EPS's in ASCII85) is not documented as a whole. VectorCraft reads its structure: layers and sublayers (names, order, visibility, lock, printing, preview, dimming, colour), groups as they were nested, compound paths (painted by their last path, or the last painted one, with the paths of groups inside them kept as their paths: #1410), clipping groups and layer clipping (several clipping paths in a clipping group, a layer or an opacity mask's art clip to their intersection, and a compound path of clipping paths stays one clip; clipping paths that would nest the art past the document's 32 levels stop the editing data from being read: #5789), object names, hidden and locked objects, fills and strokes (grey, CMYK, RGB, named and spot colours, spot colours defined in Lab with their Lab values (#1032), global process colours as global swatches at their tint; a stroke of width 0, `0 w`, on a path, a gradient-filled path, legacy type or in an art style comes in as a 0.25 pt hairline, as from PDF: #1671), linear and radial gradients, pattern fills with their patterns as pattern swatches (#1025), gradient and pattern names in the file up to their first newline (a name that another swatch, or a gradient or pattern defined earlier, already has is numbered "Sky 2"; a name without a newline is kept, and when another swatch has it, the pattern's swatch, or a named color sharing a gradient or pattern swatch's name, is numbered the same way), opacity, blend modes, isolation and knockout, embedded images where their matrix puts them, rotated ones too (#2269), with their alpha channel (CMYK images keep their ink amounts, as they do when a `.ai` opens from its PDF part, and an alpha channel that hides part of a CMYK image becomes a grayscale opacity mask), placed (linked) files as linked images in their place, each showing the low-resolution preview the file keeps of it until its file is found or relinked in the Links panel (#1264), with the folder the file keeps relative to the document's, where the link is looked for when its path is gone, guides, and every artboard where it is, with its center mark, cross hairs, video safe areas and video ruler pixel aspect ratio. VectorCraft reads `CropAreaActive`, an `/Int` in the dictionary that holds the artboard array, as the index of the active artboard in that array, and the file opens with that artboard active; without it, or when it names no artboard that opens, the first artboard is active. It also reads the Document Raster Effects Settings (resolution, color model, background, anti-alias, clipping mask, Add Around Object and Preserve Spot Colors), the author from the header's `%%For` (an EPS's own header when the editing data's has none), swatches for the header's `%%CMYKCustomColor` and `%%RGBCustomColor` colors that the document has none of, and `%%TemplateBox` in older files; a setting with a value of another type or out of range keeps its default. Objects on Path groups open live, with their path, their objects in order along it, Pivot and Rotate; one with a dragged spacing or other options opens as a plain group. A gradient with stops in the middle runs its whole ramp across its shape, and a gradient object does not pass its fill to the next path (#1390). An object whose art style is one fill and one stroke at most (solid colours, its own gradient, a variable-width profile) with Drop Shadow, Inner Glow, Outer Glow, Feather, Round Corners, Scribble, Offset Path, Outline Object, Outline Stroke, Convert to Shape, Tweak (only when it moves nothing), Pucker & Bloat at 0 or Bas Relief (read from its settings block: [raster effects reference](https://helpx.adobe.com/illustrator/desktop/special-effects-styles/apply-filter-effects/raster-effects-reference.html), [Photoshop File Formats Specification](https://www.adobe.com/devnet-apps/photoshop/fileformatashtml/), [scripting the filter gallery](https://community.adobe.com/questions-712/scripting-support-for-the-filter-gallery-1064646)) comes in as itself with them and their saved settings. A path, compound path or group (not a clipping group) whose only effect is Transform (not with copies or Random) or a Free Distort whose corners make a parallelogram comes in as itself with it too, when neither it nor anything in it paints with a gradient or pattern and everything in it is a path, compound path or group with no opacity mask and no effects of its own; Transform that scales, rotates or reflects needs nothing in it to be stroked. Twist as the only effect is read the same way on an unstroked path or compound path whose segments are all straight. One with more, other effects (Zig Zag, a Pucker & Bloat of another amount, a Free Distort with other corners), an effect setting that is not read (an unknown key, a missing or out-of-range value, a Scribble with a color of its own), dashes aligned to corners, a brush other than a Calligraphic or Art one, a Calligraphic brush with settings of its own or an angle that follows the path, or an Art brush other than the ones described next comes in as its drawn look (a group named after it). A path with a Calligraphic brush otherwise comes in as the path, the brush on its stroke at the stroke's weight, which scales the brush (#372), and so does a path with an Art brush, whose weight scales the art across the path, when all of these hold: the brush stretches its art along the path, unflipped, at 100% in Tints; the path's settings are the brush's own, with no entry that isn't read, no variable width and no effects; its stroke isn't a swatch; and the art is paths, compound paths and groups in solid fills, with no strokes, masks or effects, and has some length along the path. A stroke takes the brush the Brushes panel keeps under its name, and one whose name the panel doesn't keep comes in as its drawn look. Type with an Art brush keeps its drawn look under the type. A Calligraphic brush's Pressure, Tilt, Bearing and Rotation come in as those channels (a 6D Art Pen's brushes vary with the pressure, the bearing and the barrel's rotation); its Stylus Wheel varies at random. The file's Calligraphic, Scatter, Art and Bristle brushes replace the default ones in the Brushes panel, in the file's order, also when the file comes in as its PDF part (a brush library has no layers); pattern brushes and brushes it can't read are left out with a note. Type keeps its art style as a live appearance whatever its stack (an Art brush aside), so it can be retyped: each fill and stroke of the style's stack (solid colours, gradients and pattern fills, placed as the drawn look places them) with its own opacity, blend mode and effects, the effects on the whole object, and where the characters paint among them; the effects read are Warp, Offset Path, Outline Object, Outline Stroke, Transform (with copies, Transform Objects, Transform Patterns and Scale Strokes & Effects; not with Random), Free Distort, Pucker & Bloat, Twist, Zig Zag, Tweak (only when it moves nothing, the file holding none of its random outline), Drop Shadow, Inner Glow, Outer Glow, Feather, Round Corners, Scribble, Gaussian Blur, Bas Relief (its detail, smoothness and light direction from its settings block, or the effect's defaults when the style holds no settings block; a settings block that isn't read keeps the drawn look) and Convert to Shape, and a style with others, or with an effect setting that isn't read, keeps the type's drawn look. Convert to Shape keeps its Rectangle, Rounded Rectangle or Ellipse, its Absolute or Relative size (a relative size in the file is added to each side) and its corner radius; a relative Ellipse, or a setting that isn't read, keeps the drawn look. The page's drawing of such a style isn't held to look like VectorCraft's where its drawn look lay. Gradients take their matrix (`Xm`, radials and skewed ones too), focal point and the order of stops sharing a ramp point; gradient meshes, a clipping path's own fill and its stroke, and the artboards' names are read too. `editingData: "always"` (`convert --editing-data`) opens a `.ai` or an Illustrator EPS from its editing data even where it draws differently from its page, which can be older, with a note. Type is made from the file's text document, whole and editable, shown or not: point type (its frame's matrix, which newer files leave out when it is neither turned nor scaled, read as none), area type (a story in several frames as threaded type) and type on a path, with its characters, fonts, size, leading, tracking, scaling, baseline shift, fill and stroke (grey, RGB or CMYK), alignment, indents and paragraph spacing (a character attribute a run doesn't set comes from its character style, then the style that one is based on, then the document's defaults); area type keeps its frame's Area Type Options rows and columns, the gutter between rows and the gutter between columns, and its first baseline (Fixed, Cap Height, Leading or x Height) with its minimum; type on a path keeps its frame's Type on a Path effect, Align to Path and Flip (a frame whose options set key 6 to true keeps their defaults), and the first frame's Spacing is fitted from the file's layout, not read from the dialog's value; the distance from the path under Align to Path is measured for each character at its size and vertical scale (in vertical type, its horizontal scale), from the top of its font's em box (Ascender), half the height of the top of its font's H (Center) or the bottom of its font's bounding box (Descender); the fit under Gravity does not reproduce the file's layout, and its glyphs can lie up to 7.4 pt from the positions the file keeps; the page's drawing of it (often in pieces) is left out. Vertical type keeps its orientation, its columns from right to left, and a run set to Tate-chu-yoko keeps that setting. When it makes the type of every text object that shows, the page's type is only compared with it, each text object keeps its own group, frame and layer, and a line break inside a paragraph stays one. Where it can't make a text object's type (a frame of another kind), that text object takes the page's type where the text document puts its lines, or else what is left of the page's type in painting order (no group around it); the page's type where made type draws stays that type's, and hidden type is left out with a note. Text wrap is read too: an object whose dictionary has the wrap options (offset and Invert Wrap), or any graphic of a legacy wraparound group (`*w` … `*W`, before or after its type, with no offset), is a wrap object, and area type below it in its layer flows around it when the file opens, threaded type included (#2763). Kerning, underline and the other character and paragraph options aren't read yet. A `.ai` saved without PDF compatibility (a placeholder page) opens from its editing data alone, its point type, area type and type on a path made from the text document. A `.ai` whose PDF part shows only text isn't taken for that placeholder when its page states an art, trim or bleed box: it opens from its editing data alone where that reads, else from its PDF part (#1387). A `.ai` whose PDF part draws nothing at all (an empty page, with or without those boxes) opens from its editing data alone where that reads too: there is no page art to check its layers against, and the empty page would lose all of it. Text objects with an appearance keep their own text and frame, type of hidden layers stays hidden, and type on later artboards lands on its text objects (#1391); area type whose frame is too short for a line of the fallback font shows its first line (the frame is made taller, with a warning in the open result) (#1392). Symbols are read into the Symbols panel, in the file's symbol list order, with their art, their registration point and the instances in their art, and their instances come in live with their matrix, name, hide, lock, opacity, blending mode, isolation, knockout and opacity mask; a symbol whose art isn't read whole (type, placed files, an image it leaves out or anything else it doesn't read) isn't kept. Symbols are read only with the layers: a file that comes in as its page or PDF part (editing data with no layers, layers that can't be read, or any of the cases below) opens with an empty Symbols panel. Instances of symbols it can't read, instances with appearance changes of their own (a dynamic symbol's), pattern fills whose pattern it can't read, placed files the data keeps no preview of and anything else it doesn't read make the file come in as its page (on a layer that doesn't show, they are left out of that layer), with a warning saying what. An unread object on a shown layer whose box can be found instead comes in as a group of the page's objects inside that box, named after it, with the rest of the layers and groups kept and a warning listing what came in as the page's art; the file still comes in as its page when live art or another unread object shares that page art, when the object spans two artboards or lies on an artboard that has no page, when no page art lies inside its box, when that page art is inside a page group with a clip, mask, transparency or appearance, when the object holds a frame of threaded type, when the page art uses a pattern, image or swatch that the page lacks or that differs from the editing data's, or when the page art doesn't carry its transparency (#4806). The layers' art is also compared with the page (by lightness, so colours written as their CMYK equivalents compare alike, and by whether a pixel is inked at all); the page is used when they differ by more than 5% (away from type, when all the type is made from the text document), where one draws an object the other doesn't (away from type, whose lines may be laid out afresh), and when an EPS whose page is its art's box has art printed outside it (#735). A `.ai` is not compared with its page, and its PDF part is not imported, when its text document makes the type of every text object (at least one shows, and none is drawn by the appearance of the layer or group it is in), no object is unread, no placed file has a second placement, no live envelope keeps its drawn art, it declares no large canvas, and its artboards are its pages' trim boxes one for one, in points or in the first page's `UserUnit`: it opens from its layers, with the bleed of its pages' bleed boxes. When they differ because some objects draw differently (an object in another color, or one that only one of them draws), each top-level object of the layers that holds such a difference comes in as a group of the page's objects inside its box and the layers stay, with a warning that names the layer or sublayer of each such object as the Layers panel shows it (`<Layer>` for one without a name) and how many came in from it; an export or Save As to the file's own path then needs `acknowledgeLoss: true`, and a wrap object replaced this way keeps its wrap options. The file still comes in as its page when only edges or type differ, when a difference lies outside every top-level object, when more than half of the top-level objects or more than 64 hold one, when such an object is or holds type or holds a wrap object inside a group, when the page's type of a text object that stays lies inside such an object's box, when the page's art can't replace such an object for one of the reasons above for an unread object, when matching the differences to the objects would take too much work, or when the result still differs from the page. `editingData: "always"` keeps the objects as read, and placed files at the other point their data gives are tried as well. An EPS whose page is its art's box keeps that page when it comes in through its layers, not the editing data's artboard, and a text object counts as drawn by the page by its colours, not only its lightness, so a red stroke stacked over a dark red one stays (#1102). `textAs: "outlines"` opens a `.ai` whose type shows from its PDF part, which has the outlines; `editingData: false` opens any of them as its page or PDF part only, for print pipelines (#735). A file whose import left something out (hidden text, art or layers) is never written over by an export or Save As to its own path unless `acknowledgeLoss: true` (`convert --replace-lossy`), so the original keeps what the document lacks. Where a `.ai` can't be read that way (or its layers are turned off in the import options), we read its PDF-compatible part, so Illustrator-only live objects arrive as appearance, and plain groups arrive ungrouped: that part draws each object on its own and marks only layers, clipping groups and groups with opacity, blending or a mask (those come back). Art outside the artboards isn't in that part at all (Illustrator's PDF part leaves it out), so it doesn't open; the import says so in a note (#472). Its pages still go where the editing data puts the artboards (a grid stays a grid), with the art on each, when it has as many artboards as pages, of the same sizes (#1068); the page of the artboard `CropAreaActive` names is then the active artboard. A `.ai` whose editing data has artboards but no layers also opens on that page under the same check, and its pages stay where they are. A `.ai` whose PDF part's pages are cropped to its art (each page the box of all the art, which is the editing data's bounding box) instead of its artboards opens from its layers, with its own artboards, where they draw as that page does. Its pages are laid out so that art one of them draws past its artboard (notes beside a design, which the part doesn't clip) doesn't lie over the page before it in the row, where it was taken for that page's art: the check against the editing data then found art its layers don't have there and opened the file as its PDF part, without the art outside the artboards. That part also has no paragraphs: area type is written line by line, and comes back as area type only where its font is installed and lays the lines out with the same breaks, else as a point type object per line (#508). Art off the page that a PDF does draw opens on the pasteboard.
+the app's own editing copy of a file (an EPS after its `%%EOF`, a `.ai`'s `AIPrivateData` streams, a PDF's `AIPDFPrivateData` streams when it was saved with the editing data (#868), Zstandard or zlib, the EPS's in ASCII85) is not documented as a whole. VectorCraft reads its structure: layers and sublayers (names, order, visibility, lock, printing, preview, dimming, colour), groups as they were nested, compound paths (painted by their last path, or the last painted one, with the paths of groups inside them kept as their paths: #1410), clipping groups and layer clipping (several clipping paths in a clipping group, a layer or an opacity mask's art clip to their intersection, and a compound path of clipping paths stays one clip; clipping paths that would nest the art past the document's 32 levels stop the editing data from being read: #5789), object names, hidden and locked objects, fills and strokes (grey, CMYK, RGB, named and spot colours, spot colours defined in Lab with their Lab values (#1032), global process colours as global swatches at their tint; a stroke of width 0, `0 w`, on a path, a gradient-filled path, legacy type or in an art style comes in as a 0.25 pt hairline, as from PDF: #1671), linear and radial gradients, pattern fills with their patterns as pattern swatches (#1025), gradient and pattern names in the file up to their first newline (a name that another swatch, or a gradient or pattern defined earlier, already has is numbered "Sky 2"; a name without a newline is kept, and when another swatch has it, the pattern's swatch, or a named color sharing a gradient or pattern swatch's name, is numbered the same way), opacity, blend modes, isolation and knockout, embedded images where their matrix puts them, rotated ones too (#2269), with their alpha channel (CMYK images keep their ink amounts, as they do when a `.ai` opens from its PDF part, and an alpha channel that hides part of a CMYK image becomes a grayscale opacity mask), placed (linked) files as linked images in their place, each showing the low-resolution preview the file keeps of it until its file is found or relinked in the Links panel (#1264), with the folder the file keeps relative to the document's, where the link is looked for when its path is gone, guides, and every artboard where it is, with its center mark, cross hairs, video safe areas and video ruler pixel aspect ratio. VectorCraft reads `CropAreaActive`, an `/Int` in the dictionary that holds the artboard array, as the index of the active artboard in that array, and the file opens with that artboard active; without it, or when it names no artboard that opens, the first artboard is active. It also reads the Document Raster Effects Settings (resolution, color model, background, anti-alias, clipping mask, Add Around Object and Preserve Spot Colors), the author from the header's `%%For` (an EPS's own header when the editing data's has none), swatches for the header's `%%CMYKCustomColor` and `%%RGBCustomColor` colors that the document has none of, and `%%TemplateBox` in older files; a setting with a value of another type or out of range keeps its default. Objects on Path groups open live, with their path, their objects in order along it, Pivot and Rotate; one with a dragged spacing or other options opens as a plain group. A gradient with stops in the middle runs its whole ramp across its shape, and a gradient object does not pass its fill to the next path (#1390). An object whose art style is one fill and one stroke at most (solid colours, its own gradient, a variable-width profile) with Drop Shadow, Inner Glow, Outer Glow, Feather, Round Corners, Scribble, Offset Path, Outline Object, Outline Stroke, Convert to Shape, Tweak (only when it moves nothing), Pucker & Bloat at 0 or Bas Relief (read from its settings block: [raster effects reference](https://helpx.adobe.com/illustrator/desktop/special-effects-styles/apply-filter-effects/raster-effects-reference.html), [Photoshop File Formats Specification](https://www.adobe.com/devnet-apps/photoshop/fileformatashtml/), [scripting the filter gallery](https://community.adobe.com/questions-712/scripting-support-for-the-filter-gallery-1064646)) comes in as itself with them and their saved settings. A path, compound path or group (not a clipping group) whose only effect is Transform (not with copies or Random) or a Free Distort whose corners make a parallelogram comes in as itself with it too, when neither it nor anything in it paints with a gradient or pattern and everything in it is a path, compound path or group with no opacity mask and no effects of its own; Transform that scales, rotates or reflects needs nothing in it to be stroked. Twist as the only effect is read the same way on an unstroked path or compound path whose segments are all straight. One with more, other effects (Zig Zag, a Pucker & Bloat of another amount, a Free Distort with other corners), an effect setting that is not read (an unknown key, a missing or out-of-range value, a Scribble with a color of its own), dashes aligned to corners, a brush other than a Calligraphic one, or a Calligraphic brush with settings of its own or an angle that follows the path comes in as its drawn look (a group named after it). A path with a Calligraphic brush otherwise comes in as the path, the brush on its stroke at the stroke's weight, which scales the brush (#372). A Calligraphic brush's Pressure, Tilt, Bearing and Rotation come in as those channels (a 6D Art Pen's brushes vary with the pressure, the bearing and the barrel's rotation); its Stylus Wheel varies at random. The file's Calligraphic, Scatter, Art and Bristle brushes replace the default ones in the Brushes panel, in the file's order, also when the file comes in as its PDF part (a brush library has no layers); pattern brushes and brushes it can't read are left out with a note. Type keeps its art style as a live appearance whatever its stack, so it can be retyped: each fill and stroke of the style's stack (solid colours, gradients and pattern fills, placed as the drawn look places them) with its own opacity, blend mode and effects, the effects on the whole object, and where the characters paint among them; the effects read are Warp, Offset Path, Outline Object, Outline Stroke, Transform (with copies, Transform Objects, Transform Patterns and Scale Strokes & Effects; not with Random), Free Distort, Pucker & Bloat, Twist, Zig Zag, Tweak (only when it moves nothing, the file holding none of its random outline), Drop Shadow, Inner Glow, Outer Glow, Feather, Round Corners, Scribble, Gaussian Blur, Bas Relief (its detail, smoothness and light direction from its settings block, or the effect's defaults when the style holds no settings block; a settings block that isn't read keeps the drawn look) and Convert to Shape, and a style with others, or with an effect setting that isn't read, keeps the type's drawn look. Convert to Shape keeps its Rectangle, Rounded Rectangle or Ellipse, its Absolute or Relative size (a relative size in the file is added to each side) and its corner radius; a relative Ellipse, or a setting that isn't read, keeps the drawn look. The page's drawing of such a style isn't held to look like VectorCraft's where its drawn look lay. Gradients take their matrix (`Xm`, radials and skewed ones too), focal point and the order of stops sharing a ramp point; gradient meshes, a clipping path's own fill and its stroke, and the artboards' names are read too. `editingData: "always"` (`convert --editing-data`) opens a `.ai` or an Illustrator EPS from its editing data even where it draws differently from its page, which can be older, with a note. Type is made from the file's text document, whole and editable, shown or not: point type (its frame's matrix, which newer files leave out when it is neither turned nor scaled, read as none), area type (a story in several frames as threaded type) and type on a path, with its characters, fonts, size, leading, tracking, scaling, baseline shift, fill and stroke (grey, RGB or CMYK), alignment, indents and paragraph spacing (a character attribute a run doesn't set comes from its character style, then the style that one is based on, then the document's defaults); area type keeps its frame's Area Type Options rows and columns, the gutter between rows and the gutter between columns, and its first baseline (Fixed, Cap Height, Leading or x Height) with its minimum; type on a path keeps its frame's Type on a Path effect, Align to Path and Flip, and the first frame's Spacing is fitted from the file's layout, not read from the dialog's value; the distance from the path under Align to Path is measured for each character at its size and vertical scale (in vertical type, its horizontal scale), from the top of its font's em box (Ascender), half the height of the top of its font's H (Center) or the bottom of its font's bounding box (Descender); the fit under Gravity does not reproduce the file's layout, and its glyphs can lie up to 7.4 pt from the positions the file keeps; the page's drawing of it (often in pieces) is left out. Vertical type keeps its orientation, its columns from right to left, and a run set to Tate-chu-yoko keeps that setting. When it makes the type of every text object that shows, the page's type is only compared with it, each text object keeps its own group, frame and layer, and a line break inside a paragraph stays one. Where it can't make a text object's type (a frame of another kind), that text object takes the page's type where the text document puts its lines, or else what is left of the page's type in painting order (no group around it); the page's type where made type draws stays that type's, and hidden type is left out with a note. Text wrap is read too: an object whose dictionary has the wrap options (offset and Invert Wrap), or any graphic of a legacy wraparound group (`*w` … `*W`, before or after its type, with no offset), is a wrap object, and area type below it in its layer flows around it when the file opens, threaded type included (#2763). Kerning, underline and the other character and paragraph options aren't read yet. A `.ai` saved without PDF compatibility (a placeholder page) opens from its editing data alone, its point type, area type and type on a path made from the text document. A `.ai` whose PDF part shows only text isn't taken for that placeholder when its page states an art, trim or bleed box: it opens from its editing data alone where that reads, else from its PDF part (#1387). A `.ai` whose PDF part draws nothing at all (an empty page, with or without those boxes) opens from its editing data alone where that reads too: there is no page art to check its layers against, and the empty page would lose all of it. Text objects with an appearance keep their own text and frame, type of hidden layers stays hidden, and type on later artboards lands on its text objects (#1391); area type whose frame is too short for a line of the fallback font shows its first line (the frame is made taller, with a warning in the open result) (#1392). Symbols are read into the Symbols panel, in the file's symbol list order, with their art, their registration point and the instances in their art, and their instances come in live with their matrix, name, hide, lock, opacity, blending mode, isolation, knockout and opacity mask; a symbol whose art isn't read whole (type, placed files, an image it leaves out or anything else it doesn't read) isn't kept. Symbols are read only with the layers: a file that comes in as its page or PDF part (editing data with no layers, layers that can't be read, or any of the cases below) opens with an empty Symbols panel. Instances of symbols it can't read, instances with appearance changes of their own (a dynamic symbol's), pattern fills whose pattern it can't read, placed files the data keeps no preview of and anything else it doesn't read make the file come in as its page (on a layer that doesn't show, they are left out of that layer), with a warning saying what. An unread object on a shown layer whose box can be found instead comes in as a group of the page's objects inside that box, named after it, with the rest of the layers and groups kept and a warning listing what came in as the page's art; the file still comes in as its page when live art or another unread object shares that page art, when the object spans two artboards or lies on an artboard that has no page, when no page art lies inside its box, when that page art is inside a page group with a clip, mask, transparency or appearance, when the object holds a frame of threaded type, when the page art uses a pattern, image or swatch that the page lacks or that differs from the editing data's, or when the page art doesn't carry its transparency (#4806). The layers' art is also compared with the page (by lightness, so colours written as their CMYK equivalents compare alike, and by whether a pixel is inked at all); the page is used when they differ by more than 5% (away from type, when all the type is made from the text document), where one draws an object the other doesn't (away from type, whose lines may be laid out afresh), and when an EPS whose page is its art's box has art printed outside it (#735). A `.ai` is not compared with its page, and its PDF part is not imported, when its text document makes the type of every text object (at least one shows, and none is drawn by the appearance of the layer or group it is in), no object is unread, no placed file has a second placement, no live envelope keeps its drawn art, it declares no large canvas, and its artboards are its pages' trim boxes one for one, in points or in the first page's `UserUnit`: it opens from its layers, with the bleed of its pages' bleed boxes. When they differ because some objects draw differently (an object in another color, or one that only one of them draws), each top-level object of the layers that holds such a difference comes in as a group of the page's objects inside its box and the layers stay, with a warning that names the layer or sublayer of each such object as the Layers panel shows it (`<Layer>` for one without a name) and how many came in from it; an export or Save As to the file's own path then needs `acknowledgeLoss: true`, and a wrap object replaced this way keeps its wrap options. The file still comes in as its page when only edges or type differ, when a difference lies outside every top-level object, when more than half of the top-level objects or more than 64 hold one, when such an object is or holds type or holds a wrap object inside a group, when the page's type of a text object that stays lies inside such an object's box, when the page's art can't replace such an object for one of the reasons above for an unread object, when matching the differences to the objects would take too much work, or when the result still differs from the page. `editingData: "always"` keeps the objects as read, and placed files at the other point their data gives are tried as well. An EPS whose page is its art's box keeps that page when it comes in through its layers, not the editing data's artboard, and a text object counts as drawn by the page by its colours, not only its lightness, so a red stroke stacked over a dark red one stays (#1102). `textAs: "outlines"` opens a `.ai` whose type shows from its PDF part, which has the outlines; `editingData: false` opens any of them as its page or PDF part only, for print pipelines (#735). A file whose import left something out (hidden text, art or layers) is never written over by an export or Save As to its own path unless `acknowledgeLoss: true` (`convert --replace-lossy`), so the original keeps what the document lacks. Where a `.ai` can't be read that way (or its layers are turned off in the import options), we read its PDF-compatible part, so Illustrator-only live objects arrive as appearance, and plain groups arrive ungrouped: that part draws each object on its own and marks only layers, clipping groups and groups with opacity, blending or a mask (those come back). Art outside the artboards isn't in that part at all (Illustrator's PDF part leaves it out), so it doesn't open; the import says so in a note (#472). Its pages still go where the editing data puts the artboards (a grid stays a grid), with the art on each, when it has as many artboards as pages, of the same sizes (#1068); the page of the artboard `CropAreaActive` names is then the active artboard. A `.ai` whose editing data has artboards but no layers also opens on that page under the same check, and its pages stay where they are. A `.ai` whose PDF part's pages are cropped to its art (each page the box of all the art, which is the editing data's bounding box) instead of its artboards opens from its layers, with its own artboards, where they draw as that page does. Its pages are laid out so that art one of them draws past its artboard (notes beside a design, which the part doesn't clip) doesn't lie over the page before it in the row, where it was taken for that page's art: the check against the editing data then found art its layers don't have there and opened the file as its PDF part, without the art outside the artboards. That part also has no paragraphs: area type is written line by line, and comes back as area type only where its font is installed and lays the lines out with the same breaks, else as a point type object per line (#508). Art off the page that a PDF does draw opens on the pasteboard.
 the app's own editing copy of a file (an EPS after its `%%EOF`, a `.ai`'s `AIPrivateData` streams, a PDF's `AIPDFPrivateData` streams when it was saved with the editing data (#868), Zstandard or zlib, the EPS's in ASCII85) is not documented as a whole. VectorCraft reads its structure: layers and sublayers (names, order, visibility, lock, printing, preview, dimming, colour), groups as they were nested, compound paths (painted by their last path, or the last painted one, with the paths of groups inside them kept as their paths: #1410), clipping groups and layer clipping (several clipping paths in a clipping group, a layer or an opacity mask's art clip to their intersection, and a compound path of clipping paths stays one clip; clipping paths that would nest the art past the document's 32 levels stop the editing data from being read: #5789), object names, hidden and locked objects, fills and strokes (grey, CMYK, RGB, named and spot colours, spot colours defined in Lab with their Lab values (#1032), global process colours as global swatches at their tint; a stroke of width 0, `0 w`, on a path, a gradient-filled path, legacy type or in an art style comes in as a 0.25 pt hairline, as from PDF: #1671), linear and radial gradients, pattern fills with their patterns as pattern swatches (#1025), gradient and pattern names in the file up to their first newline (a name that another swatch, or a gradient or pattern defined earlier, already has is numbered "Sky 2"; a name without a newline is kept, and when another swatch has it, the pattern's swatch, or a named color sharing a gradient or pattern swatch's name, is numbered the same way), opacity, blend modes, isolation and knockout, embedded images where their matrix puts them, rotated ones too (#2269), with their alpha channel (CMYK images keep their ink amounts, as they do when a `.ai` opens from its PDF part, and an alpha channel that hides part of a CMYK image becomes a grayscale opacity mask), placed (linked) files as linked images in their place, each showing the low-resolution preview the file keeps of it until its file is found or relinked in the Links panel (#1264), with the folder the file keeps relative to the document's, where the link is looked for when its path is gone, guides, and every artboard where it is, with its center mark, cross hairs, video safe areas and video ruler pixel aspect ratio. VectorCraft reads `CropAreaActive`, an `/Int` in the dictionary that holds the artboard array, as the index of the active artboard in that array, and the file opens with that artboard active; without it, or when it names no artboard that opens, the first artboard is active. It also reads the Document Raster Effects Settings (resolution, color model, background, anti-alias, clipping mask, Add Around Object and Preserve Spot Colors), the author from the header's `%%For` (an EPS's own header when the editing data's has none), swatches for the header's `%%CMYKCustomColor` and `%%RGBCustomColor` colors that the document has none of, and `%%TemplateBox` in older files; a setting with a value of another type or out of range keeps its default. Objects on Path groups open live, with their path, their objects in order along it, Pivot and Rotate; one with a dragged spacing or other options opens as a plain group. A gradient with stops in the middle runs its whole ramp across its shape, and a gradient object does not pass its fill to the next path (#1390). An object whose art style is one fill and one stroke at most (solid colours, its own gradient, a variable-width profile) with Drop Shadow, Inner Glow, Outer Glow, Feather, Round Corners, Scribble, Offset Path, Outline Object, Outline Stroke, Convert to Shape, Tweak (only when it moves nothing), Pucker & Bloat at 0 or Bas Relief (read from its settings block: [raster effects reference](https://helpx.adobe.com/illustrator/desktop/special-effects-styles/apply-filter-effects/raster-effects-reference.html), [Photoshop File Formats Specification](https://www.adobe.com/devnet-apps/photoshop/fileformatashtml/), [scripting the filter gallery](https://community.adobe.com/questions-712/scripting-support-for-the-filter-gallery-1064646)) comes in as itself with them and their saved settings. A path, compound path or group (not a clipping group) whose only effect is Transform (not with copies or Random) or a Free Distort whose corners make a parallelogram comes in as itself with it too, when neither it nor anything in it paints with a gradient or pattern and everything in it is a path, compound path or group with no opacity mask and no effects of its own; Transform that scales, rotates or reflects needs nothing in it to be stroked. Twist as the only effect is read the same way on an unstroked path or compound path whose segments are all straight. One with more, other effects (Zig Zag, a Pucker & Bloat of another amount, a Free Distort with other corners), an effect setting that is not read (an unknown key, a missing or out-of-range value, a Scribble with a color of its own), dashes aligned to corners, a brush other than a Calligraphic one, or a Calligraphic brush with settings of its own or an angle that follows the path comes in as its drawn look (a group named after it). A path with a Calligraphic brush otherwise comes in as the path, the brush on its stroke at the stroke's weight, which scales the brush (#372). A Calligraphic brush's Pressure, Tilt, Bearing and Rotation come in as those channels (a 6D Art Pen's brushes vary with the pressure, the bearing and the barrel's rotation); its Stylus Wheel varies at random. The file's Calligraphic, Scatter, Art and Bristle brushes replace the default ones in the Brushes panel, in the file's order, also when the file comes in as its PDF part (a brush library has no layers); pattern brushes and brushes it can't read are left out with a note. Type keeps its art style as a live appearance whatever its stack, so it can be retyped: each fill and stroke of the style's stack (solid colours, gradients and pattern fills, placed as the drawn look places them) with its own opacity, blend mode and effects, the effects on the whole object, and where the characters paint among them; the effects read are Warp, Offset Path, Outline Object, Outline Stroke, Transform (with copies, Transform Objects, Transform Patterns and Scale Strokes & Effects; not with Random), Free Distort, Pucker & Bloat, Twist, Zig Zag, Tweak (only when it moves nothing, the file holding none of its random outline), Drop Shadow, Inner Glow, Outer Glow, Feather, Round Corners, Scribble, Gaussian Blur, Bas Relief (its detail, smoothness and light direction from its settings block, or the effect's defaults when the style holds no settings block; a settings block that isn't read keeps the drawn look) and Convert to Shape, and a style with others, or with an effect setting that isn't read, keeps the type's drawn look. Convert to Shape keeps its Rectangle, Rounded Rectangle or Ellipse, its Absolute or Relative size (a relative size in the file is added to each side) and its corner radius; a relative Ellipse, or a setting that isn't read, keeps the drawn look. The page's drawing of such a style isn't held to look like VectorCraft's where its drawn look lay. Gradients take their matrix (`Xm`, radials and skewed ones too), focal point and the order of stops sharing a ramp point; gradient meshes, a clipping path's own fill and its stroke, and the artboards' names are read too. `editingData: "always"` (`convert --editing-data`) opens a `.ai` or an Illustrator EPS from its editing data even where it draws differently from its page, which can be older, with a note. Type is made from the file's text document, whole and editable, shown or not: point type (its frame's matrix, which newer files leave out when it is neither turned nor scaled, read as none), area type (a story in several frames as threaded type) and type on a path, with its characters, fonts, size, leading, tracking, scaling, baseline shift, fill and stroke (grey, RGB or CMYK), alignment, indents and paragraph spacing (a character attribute a run doesn't set comes from its character style, then the style that one is based on, then the document's defaults); area type keeps its frame's Area Type Options rows and columns, the gutter between rows and the gutter between columns, and its first baseline (Fixed, Cap Height, Leading or x Height) with its minimum; type on a path keeps its frame's Type on a Path effect, Align to Path and Flip, and the first frame's Spacing is fitted from the file's layout, not read from the dialog's value; the page's drawing of it (often in pieces) is left out. Vertical type keeps its orientation, its columns from right to left, and a run set to Tate-chu-yoko keeps that setting. When it makes the type of every text object that shows, the page's type is only compared with it, each text object keeps its own group, frame and layer, and a line break inside a paragraph stays one. Where it can't make a text object's type (a frame of another kind), that text object takes the page's type where the text document puts its lines, or else what is left of the page's type in painting order (no group around it); the page's type where made type draws stays that type's, and hidden type is left out with a note. Text wrap is read too: an object whose dictionary has the wrap options (offset and Invert Wrap), or any graphic of a legacy wraparound group (`*w` … `*W`, before or after its type, with no offset), is a wrap object, and area type below it in its layer flows around it when the file opens, threaded type included (#2763). Kerning, underline and the other character and paragraph options aren't read yet. A `.ai` saved without PDF compatibility (a placeholder page) opens from its editing data alone, its point type, area type and type on a path made from the text document. A `.ai` whose PDF part shows only text isn't taken for that placeholder when its page states an art, trim or bleed box: it opens from its editing data alone where that reads, else from its PDF part (#1387). A `.ai` whose PDF part draws nothing at all (an empty page, with or without those boxes) opens from its editing data alone where that reads too: there is no page art to check its layers against, and the empty page would lose all of it. Text objects with an appearance keep their own text and frame, type of hidden layers stays hidden, and type on later artboards lands on its text objects (#1391); area type whose frame is too short for a line of the fallback font shows its first line (the frame is made taller, with a warning in the open result) (#1392). Symbols are read into the Symbols panel, in the file's symbol list order, with their art, their registration point and the instances in their art, and their instances come in live with their matrix, name, hide, lock, opacity, blending mode, isolation, knockout and opacity mask; a symbol whose art isn't read whole (type, placed files, an image it leaves out or anything else it doesn't read) isn't kept. Symbols are read only with the layers: a file that comes in as its page or PDF part (editing data with no layers, layers that can't be read, or any of the cases below) opens with an empty Symbols panel. Instances of symbols it can't read, instances with appearance changes of their own (a dynamic symbol's), pattern fills whose pattern it can't read, placed files the data keeps no preview of and anything else it doesn't read make the file come in as its page (on a layer that doesn't show, they are left out of that layer), with a warning saying what. An unread object on a shown layer whose box can be found instead comes in as a group of the page's objects inside that box, named after it, with the rest of the layers and groups kept and a warning listing what came in as the page's art; the file still comes in as its page when live art or another unread object shares that page art, when the object spans two artboards or lies on an artboard that has no page, when no page art lies inside its box, when that page art is inside a page group with a clip, mask, transparency or appearance, when the object holds a frame of threaded type, when the page art uses a pattern, image or swatch that the page lacks or that differs from the editing data's, or when the page art doesn't carry its transparency (#4806). The layers' art is also compared with the page (by lightness, so colours written as their CMYK equivalents compare alike, and by whether a pixel is inked at all); the page is used when they differ by more than 5% (away from type, when all the type is made from the text document), where one draws an object the other doesn't (away from type, whose lines may be laid out afresh), and when an EPS whose page is its art's box has art printed outside it (#735). A `.ai` is not compared with its page, and its PDF part is not imported, when its text document makes the type of every text object (at least one shows, and none is drawn by the appearance of the layer or group it is in), no object is unread, no placed file has a second placement, no live envelope keeps its drawn art, it declares no large canvas, and its artboards are its pages' trim boxes one for one, in points or in the first page's `UserUnit`: it opens from its layers, with the bleed of its pages' bleed boxes. When they differ because some objects draw differently (an object in another color, or one that only one of them draws), each top-level object of the layers that holds such a difference comes in as a group of the page's objects inside its box and the layers stay, with a warning that names the layer or sublayer of each such object as the Layers panel shows it (`<Layer>` for one without a name) and how many came in from it; an export or Save As to the file's own path then needs `acknowledgeLoss: true`, and a wrap object replaced this way keeps its wrap options. The file still comes in as its page when only edges or type differ, when a difference lies outside every top-level object, when more than half of the top-level objects or more than 64 hold one, when such an object is or holds type or holds a wrap object inside a group, when the page's type of a text object that stays lies inside such an object's box, when the page's art can't replace such an object for one of the reasons above for an unread object, when matching the differences to the objects would take too much work, or when the result still differs from the page. `editingData: "always"` keeps the objects as read, and placed files at the other point their data gives are tried as well. An EPS whose page is its art's box keeps that page when it comes in through its layers, not the editing data's artboard, and a text object counts as drawn by the page by its colours, not only its lightness, so a red stroke stacked over a dark red one stays (#1102). `textAs: "outlines"` opens a `.ai` whose type shows from its PDF part, which has the outlines; `editingData: false` opens any of them as its page or PDF part only, for print pipelines (#735). A file whose import left something out (hidden text, art or layers) is never written over by an export or Save As to its own path unless `acknowledgeLoss: true` (`convert --replace-lossy`), so the original keeps what the document lacks. Where a `.ai` can't be read that way (or its layers are turned off in the import options), we read its PDF-compatible part, so Illustrator-only live objects arrive as appearance, and plain groups arrive ungrouped: that part draws each object on its own and marks only layers, clipping groups and groups with opacity, blending or a mask (those come back). Art outside the artboards isn't in that part at all (Illustrator's PDF part leaves it out), so it doesn't open; the import says so in a note (#472). Its pages still go where the editing data puts the artboards (a grid stays a grid), with the art on each, when it has as many artboards as pages, of the same sizes (#1068); the page of the artboard `CropAreaActive` names is then the active artboard. A `.ai` whose editing data has artboards but no layers also opens on that page under the same check, and its pages stay where they are. A `.ai` whose PDF part's pages are cropped to its art (each page the box of all the art, which is the editing data's bounding box) instead of its artboards opens from its layers, with its own artboards, where they draw as that page does. Its pages are laid out so that art one of them draws past its artboard (notes beside a design, which the part doesn't clip) doesn't lie over the page before it in the row, where it was taken for that page's art: the check against the editing data then found art its layers don't have there and opened the file as its PDF part, without the art outside the artboards. That part also has no paragraphs: area type is written line by line, and comes back as area type only where its font is installed and lays the lines out with the same breaks, else as a point type object per line (#508). Art off the page that a PDF does draw opens on the pasteboard.
 the app's own editing copy of a file (an EPS after its `%%EOF`, a `.ai`'s `AIPrivateData` streams, a PDF's `AIPDFPrivateData` streams when it was saved with the editing data (#868), Zstandard or zlib, the EPS's in ASCII85) is not documented as a whole. VectorCraft reads its structure: layers and sublayers (names, order, visibility, lock, printing, preview, dimming, colour), groups as they were nested, compound paths (painted by their last path, or the last painted one, with the paths of groups inside them kept as their paths: #1410), clipping groups and layer clipping (several clipping paths in a clipping group, a layer or an opacity mask's art clip to their intersection, and a compound path of clipping paths stays one clip; clipping paths that would nest the art past the document's 32 levels stop the editing data from being read: #5789), object names, hidden and locked objects, fills and strokes (grey, CMYK, RGB, named and spot colours, spot colours defined in Lab with their Lab values (#1032), global process colours as global swatches at their tint; a stroke of width 0, `0 w`, on a path, a gradient-filled path, legacy type or in an art style comes in as a 0.25 pt hairline, as from PDF: #1671), linear and radial gradients, pattern fills with their patterns as pattern swatches (#1025), gradient and pattern names in the file up to their first newline (a name that another swatch, or a gradient or pattern defined earlier, already has is numbered "Sky 2"; a name without a newline is kept, and when another swatch has it, the pattern's swatch, or a named color sharing a gradient or pattern swatch's name, is numbered the same way), opacity, blend modes, isolation and knockout, embedded images where their matrix puts them, rotated ones too (#2269), with their alpha channel (CMYK images keep their ink amounts, as they do when a `.ai` opens from its PDF part, and an alpha channel that hides part of a CMYK image becomes a grayscale opacity mask), placed (linked) files as linked images in their place, each showing the low-resolution preview the file keeps of it until its file is found or relinked in the Links panel (#1264), with the folder the file keeps relative to the document's, where the link is looked for when its path is gone, guides, and every artboard where it is, with its center mark, cross hairs, video safe areas and video ruler pixel aspect ratio. VectorCraft reads `CropAreaActive`, an `/Int` in the dictionary that holds the artboard array, as the index of the active artboard in that array, and the file opens with that artboard active; without it, or when it names no artboard that opens, the first artboard is active. It also reads the Document Raster Effects Settings (resolution, color model, background, anti-alias, clipping mask, Add Around Object and Preserve Spot Colors), the author from the header's `%%For` (an EPS's own header when the editing data's has none), swatches for the header's `%%CMYKCustomColor` and `%%RGBCustomColor` colors that the document has none of, and `%%TemplateBox` in older files; a setting with a value of another type or out of range keeps its default. Objects on Path groups open live, with their path, their objects in order along it, Pivot and Rotate; one with a dragged spacing or other options opens as a plain group. A gradient with stops in the middle runs its whole ramp across its shape, and a gradient object does not pass its fill to the next path (#1390). An object whose art style is one fill and one stroke at most (solid colours, its own gradient, a variable-width profile) with Drop Shadow, Inner Glow, Outer Glow, Feather, Round Corners, Scribble, Offset Path, Outline Object, Outline Stroke, Convert to Shape, Tweak (only when it moves nothing), Pucker & Bloat at 0 or Bas Relief (read from its settings block: [raster effects reference](https://helpx.adobe.com/illustrator/desktop/special-effects-styles/apply-filter-effects/raster-effects-reference.html), [Photoshop File Formats Specification](https://www.adobe.com/devnet-apps/photoshop/fileformatashtml/), [scripting the filter gallery](https://community.adobe.com/questions-712/scripting-support-for-the-filter-gallery-1064646)) comes in as itself with them and their saved settings. A path, compound path or group (not a clipping group) whose only effect is Transform (not with copies or Random) or a Free Distort whose corners make a parallelogram comes in as itself with it too, when neither it nor anything in it paints with a gradient or pattern and everything in it is a path, compound path or group with no opacity mask and no effects of its own; Transform that scales, rotates or reflects needs nothing in it to be stroked. Twist as the only effect is read the same way on an unstroked path or compound path whose segments are all straight. One with more, other effects (Zig Zag, a Pucker & Bloat of another amount, a Free Distort with other corners), an effect setting that is not read (an unknown key, a missing or out-of-range value, a Scribble with a color of its own), dashes aligned to corners, a brush other than a Calligraphic one, or a Calligraphic brush with settings of its own or an angle that follows the path comes in as its drawn look (a group named after it). Objects in a symbol defined before the file's art styles section, as newer files write it, take the same styles as the layers' objects. A path with a Calligraphic brush otherwise comes in as the path, the brush on its stroke at the stroke's weight, which scales the brush (#372). A Calligraphic brush's Pressure, Tilt, Bearing and Rotation come in as those channels (a 6D Art Pen's brushes vary with the pressure, the bearing and the barrel's rotation); its Stylus Wheel varies at random. The file's Calligraphic, Scatter, Art and Bristle brushes replace the default ones in the Brushes panel, in the file's order, also when the file comes in as its PDF part (a brush library has no layers); pattern brushes and brushes it can't read are left out with a note. Type keeps its art style as a live appearance whatever its stack, so it can be retyped: each fill and stroke of the style's stack (solid colours, gradients and pattern fills, placed as the drawn look places them) with its own opacity, blend mode and effects, the effects on the whole object, and where the characters paint among them; the effects read are Warp, Offset Path, Outline Object, Outline Stroke, Transform (with copies, Transform Objects, Transform Patterns and Scale Strokes & Effects; not with Random), Free Distort, Pucker & Bloat, Twist, Zig Zag, Tweak (only when it moves nothing, the file holding none of its random outline), Drop Shadow, Inner Glow, Outer Glow, Feather, Round Corners, Scribble, Gaussian Blur, Bas Relief (its detail, smoothness and light direction from its settings block, or the effect's defaults when the style holds no settings block; a settings block that isn't read keeps the drawn look) and Convert to Shape, and a style with others, or with an effect setting that isn't read, keeps the type's drawn look. Convert to Shape keeps its Rectangle, Rounded Rectangle or Ellipse, its Absolute or Relative size (a relative size in the file is added to each side) and its corner radius; a relative Ellipse, or a setting that isn't read, keeps the drawn look. The page's drawing of such a style isn't held to look like VectorCraft's where its drawn look lay. Gradients take their matrix (`Xm`, radials and skewed ones too), focal point and the order of stops sharing a ramp point; gradient meshes, a clipping path's own fill and its stroke, and the artboards' names are read too. `editingData: "always"` (`convert --editing-data`) opens a `.ai` or an Illustrator EPS from its editing data even where it draws differently from its page, which can be older, with a note. Type is made from the file's text document, whole and editable, shown or not: point type (its frame's matrix, which newer files leave out when it is neither turned nor scaled, read as none), area type (a story in several frames as threaded type) and type on a path, with its characters, fonts, size, leading, tracking, scaling, baseline shift, fill and stroke (grey, RGB or CMYK), alignment, indents and paragraph spacing (a character attribute a run doesn't set comes from its character style, then the style that one is based on, then the document's defaults); area type keeps its frame's Area Type Options rows and columns, the gutter between rows and the gutter between columns, and its first baseline (Fixed, Cap Height, Leading or x Height) with its minimum; the page's drawing of it (often in pieces) is left out. Vertical type keeps its orientation, its columns from right to left, and a run set to Tate-chu-yoko keeps that setting. When it makes the type of every text object that shows, the page's type is only compared with it, each text object keeps its own group, frame and layer, and a line break inside a paragraph stays one. Where it can't make a text object's type (a frame of another kind), that text object takes the page's type where the text document puts its lines, or else what is left of the page's type in painting order (no group around it); the page's type where made type draws stays that type's, and hidden type is left out with a note. Text wrap is read too: an object whose dictionary has the wrap options (offset and Invert Wrap), or any graphic of a legacy wraparound group (`*w` … `*W`, before or after its type, with no offset), is a wrap object, and area type below it in its layer flows around it when the file opens, threaded type included (#2763). Kerning, underline and the other character and paragraph options aren't read yet. A `.ai` saved without PDF compatibility (a placeholder page) opens from its editing data alone, its point type, area type and type on a path made from the text document. A `.ai` whose PDF part shows only text isn't taken for that placeholder when its page states an art, trim or bleed box: it opens from its editing data alone where that reads, else from its PDF part (#1387). A `.ai` whose PDF part draws nothing at all (an empty page, with or without those boxes) opens from its editing data alone where that reads too: there is no page art to check its layers against, and the empty page would lose all of it. Text objects with an appearance keep their own text and frame, type of hidden layers stays hidden, and type on later artboards lands on its text objects (#1391); area type whose frame is too short for a line of the fallback font shows its first line (the frame is made taller, with a warning in the open result) (#1392). Symbols are read into the Symbols panel, in the file's symbol list order, with their art, their registration point and the instances in their art, and their instances come in live with their matrix, name, hide, lock, opacity, blending mode, isolation, knockout and opacity mask; a symbol whose art isn't read whole (type, placed files, an image it leaves out or anything else it doesn't read) isn't kept. Symbols are read only with the layers: a file that comes in as its page or PDF part (editing data with no layers, layers that can't be read, or any of the cases below) opens with an empty Symbols panel. Instances of symbols it can't read, instances with appearance changes of their own (a dynamic symbol's), pattern fills whose pattern it can't read, placed files the data keeps no preview of and anything else it doesn't read make the file come in as its page (on a layer that doesn't show, they are left out of that layer), with a warning saying what. An unread object on a shown layer whose box can be found instead comes in as a group of the page's objects inside that box, named after it, with the rest of the layers and groups kept and a warning listing what came in as the page's art; the file still comes in as its page when live art or another unread object shares that page art, when the object spans two artboards or lies on an artboard that has no page, when no page art lies inside its box, when that page art is inside a page group with a clip, mask, transparency or appearance, when the object holds a frame of threaded type, when the page art uses a pattern, image or swatch that the page lacks or that differs from the editing data's, or when the page art doesn't carry its transparency (#4806). The layers' art is also compared with the page (by lightness, so colours written as their CMYK equivalents compare alike, and by whether a pixel is inked at all); the page is used when they differ by more than 5% (away from type, when all the type is made from the text document), where one draws an object the other doesn't (away from type, whose lines may be laid out afresh), and when an EPS whose page is its art's box has art printed outside it (#735). A `.ai` is not compared with its page, and its PDF part is not imported, when its text document makes the type of every text object (at least one shows, and none is drawn by the appearance of the layer or group it is in), no object is unread, no placed file has a second placement, no live envelope keeps its drawn art, it declares no large canvas, and its artboards are its pages' trim boxes one for one, in points or in the first page's `UserUnit`: it opens from its layers, with the bleed of its pages' bleed boxes. When they differ because some objects draw differently (an object in another color, or one that only one of them draws), each top-level object of the layers that holds such a difference comes in as a group of the page's objects inside its box and the layers stay, with a warning that names the layer or sublayer of each such object as the Layers panel shows it (`<Layer>` for one without a name) and how many came in from it; an export or Save As to the file's own path then needs `acknowledgeLoss: true`, and a wrap object replaced this way keeps its wrap options. The file still comes in as its page when only edges or type differ, when a difference lies outside every top-level object, when more than half of the top-level objects or more than 64 hold one, when such an object is or holds type or holds a wrap object inside a group, when the page's type of a text object that stays lies inside such an object's box, when the page's art can't replace such an object for one of the reasons above for an unread object, when matching the differences to the objects would take too much work, or when the result still differs from the page. `editingData: "always"` keeps the objects as read, and placed files at the other point their data gives are tried as well. An EPS whose page is its art's box keeps that page when it comes in through its layers, not the editing data's artboard, and a text object counts as drawn by the page by its colours, not only its lightness, so a red stroke stacked over a dark red one stays (#1102). `textAs: "outlines"` opens a `.ai` whose type shows from its PDF part, which has the outlines; `editingData: false` opens any of them as its page or PDF part only, for print pipelines (#735). A file whose import left something out (hidden text, art or layers) is never written over by an export or Save As to its own path unless `acknowledgeLoss: true` (`convert --replace-lossy`), so the original keeps what the document lacks. Where a `.ai` can't be read that way (or its layers are turned off in the import options), we read its PDF-compatible part, so Illustrator-only live objects arrive as appearance, and plain groups arrive ungrouped: that part draws each object on its own and marks only layers, clipping groups and groups with opacity, blending or a mask (those come back). Art outside the artboards isn't in that part at all (Illustrator's PDF part leaves it out), so it doesn't open; the import says so in a note (#472). Its pages still go where the editing data puts the artboards (a grid stays a grid), with the art on each, when it has as many artboards as pages, of the same sizes (#1068); the page of the artboard `CropAreaActive` names is then the active artboard. A `.ai` whose editing data has artboards but no layers also opens on that page under the same check, and its pages stay where they are. A `.ai` whose PDF part's pages are cropped to its art (each page the box of all the art, which is the editing data's bounding box) instead of its artboards opens from its layers, with its own artboards, where they draw as that page does. Its pages are laid out so that art one of them draws past its artboard (notes beside a design, which the part doesn't clip) doesn't lie over the page before it in the row, where it was taken for that page's art: the check against the editing data then found art its layers don't have there and opened the file as its PDF part, without the art outside the artboards. That part also has no paragraphs: area type is written line by line, and comes back as area type only where its font is installed and lays the lines out with the same breaks, else as a point type object per line (#508). Art off the page that a PDF does draw opens on the pasteboard.
 the app's own editing copy of a file (an EPS after its `%%EOF`, a `.ai`'s `AIPrivateData` streams, a PDF's `AIPDFPrivateData` streams when it was saved with the editing data (#868), Zstandard or zlib, the EPS's in ASCII85) is not documented as a whole. VectorCraft reads its structure: layers and sublayers (names, order, visibility, lock, printing, preview, dimming, colour), groups as they were nested, compound paths (painted by their last path, or the last painted one, with the paths of groups inside them kept as their paths: #1410), clipping groups and layer clipping (several clipping paths in a clipping group, a layer or an opacity mask's art clip to their intersection, and a compound path of clipping paths stays one clip; clipping paths that would nest the art past the document's 32 levels stop the editing data from being read: #5789), object names, hidden and locked objects, fills and strokes (grey, CMYK, RGB, named and spot colours, spot colours defined in Lab with their Lab values (#1032), global process colours as global swatches at their tint; a stroke of width 0, `0 w`, on a path, a gradient-filled path, legacy type or in an art style comes in as a 0.25 pt hairline, as from PDF: #1671), linear and radial gradients, pattern fills with their patterns as pattern swatches (#1025), gradient and pattern names in the file up to their first newline (a name that another swatch, or a gradient or pattern defined earlier, already has is numbered "Sky 2"; a name without a newline is kept, and when another swatch has it, the pattern's swatch, or a named color sharing a gradient or pattern swatch's name, is numbered the same way), opacity, blend modes, isolation and knockout, embedded images where their matrix puts them, rotated ones too (#2269), with their alpha channel (CMYK images keep their ink amounts, as they do when a `.ai` opens from its PDF part, and an alpha channel that hides part of a CMYK image becomes a grayscale opacity mask), placed (linked) files as linked images in their place, each showing the low-resolution preview the file keeps of it until its file is found or relinked in the Links panel (#1264), with the folder the file keeps relative to the document's, where the link is looked for when its path is gone, guides, and every artboard where it is, with its center mark, cross hairs, video safe areas and video ruler pixel aspect ratio. VectorCraft reads `CropAreaActive`, an `/Int` in the dictionary that holds the artboard array, as the index of the active artboard in that array, and the file opens with that artboard active; without it, or when it names no artboard that opens, the first artboard is active. It also reads the Document Raster Effects Settings (resolution, color model, background, anti-alias, clipping mask, Add Around Object and Preserve Spot Colors), the author from the header's `%%For` (an EPS's own header when the editing data's has none), swatches for the header's `%%CMYKCustomColor` and `%%RGBCustomColor` colors that the document has none of, and `%%TemplateBox` in older files; a setting with a value of another type or out of range keeps its default. Objects on Path groups open live, with their path, their objects in order along it, Pivot and Rotate; one with a dragged spacing or other options opens as a plain group. A gradient with stops in the middle runs its whole ramp across its shape, and a gradient object does not pass its fill to the next path (#1390). An object whose art style is one fill and one stroke at most (solid colours, its own gradient, a variable-width profile) with Drop Shadow, Inner Glow, Outer Glow, Feather, Round Corners, Scribble, Offset Path, Outline Object, Outline Stroke, Convert to Shape, Tweak (only when it moves nothing), Pucker & Bloat at 0 or Bas Relief (read from its settings block: [raster effects reference](https://helpx.adobe.com/illustrator/desktop/special-effects-styles/apply-filter-effects/raster-effects-reference.html), [Photoshop File Formats Specification](https://www.adobe.com/devnet-apps/photoshop/fileformatashtml/), [scripting the filter gallery](https://community.adobe.com/questions-712/scripting-support-for-the-filter-gallery-1064646)) comes in as itself with them and their saved settings. A path, compound path or group (not a clipping group) whose only effect is Transform (not with copies or Random) or a Free Distort whose corners make a parallelogram comes in as itself with it too, when neither it nor anything in it paints with a gradient or pattern and everything in it is a path, compound path or group with no opacity mask and no effects of its own; Transform that scales, rotates or reflects needs nothing in it to be stroked. Twist as the only effect is read the same way on an unstroked path or compound path whose segments are all straight. One with more, other effects (Zig Zag, a Pucker & Bloat of another amount, a Free Distort with other corners), an effect setting that is not read (an unknown key, a missing or out-of-range value, a Scribble with a color of its own), dashes aligned to corners, a brush other than a Calligraphic or Art one, a Calligraphic brush with settings of its own or an angle that follows the path, or an Art brush other than the ones described next comes in as its drawn look (a group named after it). A path with a Calligraphic brush otherwise comes in as the path, the brush on its stroke at the stroke's weight, which scales the brush (#372), and so does a path with an Art brush, whose weight scales the art across the path, when all of these hold: the brush stretches its art along the path, unflipped, at 100% in Tints; the path's settings are the brush's own, with no entry that isn't read, no variable width and no effects; its stroke isn't a swatch; and the art is paths, compound paths and groups in solid fills, with no strokes, masks or effects, and has some length along the path. A stroke takes the brush the Brushes panel keeps under its name, and one whose name the panel doesn't keep comes in as its drawn look. Type with an Art brush keeps its drawn look under the type. A Calligraphic brush's Pressure, Tilt, Bearing and Rotation come in as those channels (a 6D Art Pen's brushes vary with the pressure, the bearing and the barrel's rotation); its Stylus Wheel varies at random. The file's Calligraphic, Scatter, Art and Bristle brushes replace the default ones in the Brushes panel, in the file's order, also when the file comes in as its PDF part (a brush library has no layers); pattern brushes and brushes it can't read are left out with a note. Type keeps its art style as a live appearance whatever its stack (an Art brush aside), so it can be retyped: each fill and stroke of the style's stack (solid colours, gradients and pattern fills, placed as the drawn look places them) with its own opacity, blend mode and effects, the effects on the whole object, and where the characters paint among them; the effects read are Warp, Offset Path, Outline Object, Outline Stroke, Transform (with copies, Transform Objects, Transform Patterns and Scale Strokes & Effects; not with Random), Free Distort, Pucker & Bloat, Twist, Zig Zag, Tweak (only when it moves nothing, the file holding none of its random outline), Drop Shadow, Inner Glow, Outer Glow, Feather, Round Corners, Scribble, Gaussian Blur, Bas Relief (its detail, smoothness and light direction from its settings block, or the effect's defaults when the style holds no settings block; a settings block that isn't read keeps the drawn look) and Convert to Shape, and a style with others, or with an effect setting that isn't read, keeps the type's drawn look. Convert to Shape keeps its Rectangle, Rounded Rectangle or Ellipse, its Absolute or Relative size (a relative size in the file is added to each side) and its corner radius; a relative Ellipse, or a setting that isn't read, keeps the drawn look. The page's drawing of such a style isn't held to look like VectorCraft's where its drawn look lay. Gradients take their matrix (`Xm`, radials and skewed ones too), focal point and the order of stops sharing a ramp point; gradient meshes, a clipping path's own fill and its stroke, and the artboards' names are read too. `editingData: "always"` (`convert --editing-data`) opens a `.ai` or an Illustrator EPS from its editing data even where it draws differently from its page, which can be older, with a note. Type is made from the file's text document, whole and editable, shown or not: point type (its frame's matrix, which newer files leave out when it is neither turned nor scaled, read as none), area type (a story in several frames as threaded type) and type on a path, with its characters, fonts, size, leading, tracking, scaling, baseline shift, fill and stroke (grey, RGB or CMYK), alignment, indents and paragraph spacing (a character attribute a run doesn't set comes from its character style, then the style that one is based on, then the document's defaults); area type keeps its frame's Area Type Options rows and columns, the gutter between rows and the gutter between columns, and its first baseline (Fixed, Cap Height, Leading or x Height) with its minimum; the page's drawing of it (often in pieces) is left out. Vertical type keeps its orientation, its columns from right to left, and a run set to Tate-chu-yoko keeps that setting. When it makes the type of every text object that shows, the page's type is only compared with it, each text object keeps its own group, frame and layer, and a line break inside a paragraph stays one. Where it can't make a text object's type (a frame of another kind), that text object takes the page's type where the text document puts its lines, or else what is left of the page's type in painting order (no group around it); the page's type where made type draws stays that type's, and hidden type is left out with a note. Text wrap is read too: an object whose dictionary has the wrap options (offset and Invert Wrap), or any graphic of a legacy wraparound group (`*w` … `*W`, before or after its type, with no offset), is a wrap object, and area type below it in its layer flows around it when the file opens, threaded type included (#2763). Kerning, underline and the other character and paragraph options aren't read yet. A `.ai` saved without PDF compatibility (a placeholder page) opens from its editing data alone, its point type, area type and type on a path made from the text document. A `.ai` whose PDF part shows only text isn't taken for that placeholder when its page states an art, trim or bleed box: it opens from its editing data alone where that reads, else from its PDF part (#1387). A `.ai` whose PDF part draws nothing at all (an empty page, with or without those boxes) opens from its editing data alone where that reads too: there is no page art to check its layers against, and the empty page would lose all of it. Text objects with an appearance keep their own text and frame, type of hidden layers stays hidden, and type on later artboards lands on its text objects (#1391); area type whose frame is too short for a line of the fallback font shows its first line (the frame is made taller, with a warning in the open result) (#1392). Symbols are read into the Symbols panel, in the file's symbol list order, with their art, their registration point and the instances in their art, and their instances come in live with their matrix, name, hide, lock, opacity, blending mode, isolation, knockout and opacity mask; a symbol whose art isn't read whole (type, placed files, an image it leaves out or anything else it doesn't read) isn't kept. Symbols are read only with the layers: a file that comes in as its page or PDF part (editing data with no layers, layers that can't be read, or any of the cases below) opens with an empty Symbols panel. Instances of symbols it can't read, instances with appearance changes of their own (a dynamic symbol's), pattern fills whose pattern it can't read, placed files the data keeps no preview of and anything else it doesn't read make the file come in as its page (on a layer that doesn't show, they are left out of that layer), with a warning saying what. An unread object on a shown layer whose box can be found instead comes in as a group of the page's objects inside that box, named after it, with the rest of the layers and groups kept and a warning listing what came in as the page's art; the file still comes in as its page when live art or another unread object shares that page art, when the object spans two artboards or lies on an artboard that has no page, when no page art lies inside its box, when that page art is inside a page group with a clip, mask, transparency or appearance, when the object holds a frame of threaded type, when the page art uses a pattern, image or swatch that the page lacks or that differs from the editing data's, or when the page art doesn't carry its transparency (#4806). The layers' art is also compared with the page (by lightness, so colours written as their CMYK equivalents compare alike, and by whether a pixel is inked at all); the page is used when they differ by more than 5% (away from type, when all the type is made from the text document), where one draws an object the other doesn't (away from type, whose lines may be laid out afresh), and when an EPS whose page is its art's box has art printed outside it (#735). A `.ai` is not compared with its page, and its PDF part is not imported, when its text document makes the type of every text object (at least one shows, and none is drawn by the appearance of the layer or group it is in), no object is unread, no placed file has a second placement, no live envelope keeps its drawn art, it declares no large canvas, and its artboards are its pages' trim boxes one for one, in points or in the first page's `UserUnit`: it opens from its layers, with the bleed of its pages' bleed boxes. When they differ because some objects draw differently (an object in another color, or one that only one of them draws), each top-level object of the layers that holds such a difference comes in as a group of the page's objects inside its box and the layers stay, with a warning that names the layer or sublayer of each such object as the Layers panel shows it (`<Layer>` for one without a name) and how many came in from it; an export or Save As to the file's own path then needs `acknowledgeLoss: true`, and a wrap object replaced this way keeps its wrap options. The file still comes in as its page when only edges or type differ, when a difference lies outside every top-level object, when more than half of the top-level objects or more than 64 hold one, when such an object is or holds type or holds a wrap object inside a group, when the page's type of a text object that stays lies inside such an object's box, when the page's art can't replace such an object for one of the reasons above for an unread object, when matching the differences to the objects would take too much work, or when the result still differs from the page. `editingData: "always"` keeps the objects as read, and placed files at the other point their data gives are tried as well. An EPS whose page is its art's box keeps that page when it comes in through its layers, not the editing data's artboard, and a text object counts as drawn by the page by its colours, not only its lightness, so a red stroke stacked over a dark red one stays (#1102). `textAs: "outlines"` opens a `.ai` whose type shows from its PDF part, which has the outlines; `editingData: false` opens any of them as its page or PDF part only, for print pipelines (#735). A file whose import left something out (hidden text, art or layers) is never written over by an export or Save As to its own path unless `acknowledgeLoss: true` (`convert --replace-lossy`), so the original keeps what the document lacks. Where a `.ai` can't be read that way (or its layers are turned off in the import options), we read its PDF-compatible part, so Illustrator-only live objects arrive as appearance, and plain groups arrive ungrouped: that part draws each object on its own and marks only layers, clipping groups and groups with opacity, blending or a mask (those come back). Art outside the artboards isn't in that part at all (Illustrator's PDF part leaves it out), so it doesn't open; the import says so in a note (#472). Its pages still go where the editing data puts the artboards (a grid stays a grid), with the art on each, when it has as many artboards as pages, of the same sizes (#1068); the page of the artboard `CropAreaActive` names is then the active artboard. A `.ai` whose editing data has artboards but no layers also opens on that page under the same check, and its pages stay where they are. A `.ai` whose PDF part's pages are cropped to its art (each page the box of all the art, which is the editing data's bounding box) instead of its artboards opens from its layers, with its own artboards, where they draw as that page does. Its pages are laid out so that art one of them draws past its artboard (notes beside a design, which the part doesn't clip) doesn't lie over the page before it in the row, where it was taken for that page's art: the check against the editing data then found art its layers don't have there and opened the file as its PDF part, without the art outside the artboards. That part also has no paragraphs: area type is written line by line, and comes back as area type only where its font is installed and lays the lines out with the same breaks, else as a point type object per line (#508). Art off the page that a PDF does draw opens on the pasteboard.
diff --git a/docs/gaps.md b/docs/gaps.md
index 40626920f..210f14b80 100644
--- a/docs/gaps.md
+++ b/docs/gaps.md
@@ -187,7 +187,7 @@ from G14 and the budget run of G15: **~170–270 h** one agent, ~50–80 h wall
 
 ## G9 Illustrator `.ai` and EPS files from real users
 
-- **Done (2026-10-30):** from an audit of a user's `.ai`/EPS files: All Caps and Small Caps; placed files at their box's corner; pages cropped to the art; gradient mesh corners with handle weights of 0 and the transparency written after a mesh, a masked mesh and a blend; a layer's state block with the stroke style; type on a path spaced as the file lays it out (the distance from the path under Align to Path comes from VectorCraft's font metrics, and the fit under Gravity does not reproduce the file's layout); EPS10 legacy-format type; a PDF of some artboards compared on the artboard its page shows. Comparison limits remain unchanged. This narrows G9; scores and estimates unchanged.
+- **Done (2026-10-30):** from an audit of a user's `.ai`/EPS files: All Caps and Small Caps; placed files at their box's corner; pages cropped to the art; gradient mesh corners with handle weights of 0 and the transparency written after a mesh, a masked mesh and a blend; a layer's state block with the stroke style; type on a path spaced as the file lays it out (the distance from the path under Align to Path is measured from the top of each character's em box, half the height of the top of its H or the bottom of its font's bounding box, and the fit under Gravity does not reproduce the file's layout); EPS10 legacy-format type; a PDF of some artboards compared on the artboard its page shows. Comparison limits remain unchanged. This narrows G9; scores and estimates unchanged.
 
 - **Save-back update (2026-10-26):** ordinary EPS Save retains page margins and the whole editable document; source-loss confirmation remains. Import fidelity gaps and estimates below are unchanged.
 
diff --git a/docs/mcp.md b/docs/mcp.md
index 9cfb1da93..ab0d5d55a 100644
--- a/docs/mcp.md
+++ b/docs/mcp.md
@@ -6269,8 +6269,12 @@ Type on a path flows between a start and an end bracket, stored as fractions of
 Path Options: `end: null` puts the end bracket back at the end of the path (or once round a closed one); `flip`
 then turns the type to the other side of its path, the path running the other way and the brackets swapping ends so
 the type keeps its stretch of the path; `alignToPath` runs the `ascender`, `descender`, `center` or `baseline` (the
-default) along the path; `spacing` (points) closes glyphs up round the outside of curves and opens them up round the
-inside. With none of them it queries the first selected type on a path:
+default) along the path, each character by its own font, size and vertical scale: `ascender` runs the top of the
+font's em box along it (its ideographic em box, else an em box centered on the cap height), `descender` runs the
+bottom of the font's bounding box along it, and `center` runs a line at half the height of the top of the font's H
+above the baseline along it (in vertical type, `ascender` and `descender` move the characters half an em with their
+horizontal scale, and `center` leaves them on the path); `spacing` (points) closes glyphs up round the outside of
+curves and opens them up round the inside. With none of them it queries the first selected type on a path:
 `{start, end, flip: false, effect, alignToPath, spacing}`. The Options dialog shows Effect, Flip, Align to Path and
 Spacing and leaves the brackets where they are. As in the reference app, the Selection and Direct Selection tools
 show selected type on a path's brackets: dragging the start or end bracket (`pointer_gesture`) sets where the type
diff --git a/docs/target-app-parity.md b/docs/target-app-parity.md
index ca19cc59c..53ee5319e 100644
--- a/docs/target-app-parity.md
+++ b/docs/target-app-parity.md
@@ -209,7 +209,7 @@ dominate; 3D, graphs and automation are specialist). They sum to 105. Feature de
 | Image Trace, graphs, image tools | 3 | 75% | graph Column designs, Image Trace Create Strokes depth (Create Object Mosaic is done; junction-returning piece survival has source-generated regressions in `image-trace-quality.md`; large images trace with a warning; Auto Color keeps rare distinct colours) | 5–8 | estimated (raised from 72%); quick presets reveal adjustment controls, Properties reopens them |
 | Layers, artboards, document setup | 5 | 78% | Selected-artboard deletion is consistent across panel actions (all-selected retains artboard 1); history prunes removed indices while preserving valid multiselection; remaining:  30.0's artboard locking and colours and managing artboards from the canvas, Layers panel row context menus and Collect for Export (click-to-fit objects is done, #1227) | 5–8 | estimated (lowered from 82%: target moved); Artboard deletion keys keep artwork and the first of an all-selected set; Artboard Options' Show Center Mark and Show Cross Hairs draw on the canvas only (exports and print leave them out), regression-tested; Artboard Options' Show Video Safe Areas and Video Ruler Pixel Aspect Ratio (per artboard, native format) are done ([video display options](#evidence-what-ships-today-by-area)), score unchanged |
 | View & navigation | 3 | 70% | multiple windows and the rest of Arrange (Cascade, Float in Window, Float All in Windows) | 9–14 | estimated; Window › Arrange › Tile and Consolidate All Windows done (score/hours unchanged); document-tab artwork hover/copy and lossless transfer tested (2026-10-22; score/hours unchanged); cached canvas reprojection preserves scale during resize, rotation and DPI changes (regression and contributor original-file evidence below; scores/hours unchanged); cached canvas dimensions match the renderer limit before cache-key creation, view construction and worker submission (regression evidence below) |
-| File formats | 6 | 75% | `.ai` files open with a flattened or wrong layer structure in real cases (#951), no writing of Illustrator's editing data (#868), FreeHand/CorelDRAW/DWG/HEIC import, 3D export; see [file-format-parity.md](file-format-parity.md); EPS legacy mesh/opacity-mask and raster comparison follow-up verified | 10–20 | estimated (lowered from 85%: open issues); DXF control-point SPLINE import closure regression-tested (#1299 follow-up after #1320); PDF writer metadata, reader streaming and immutable backend checks in `crates/pdf/src/tests.rs`, `crates/pdf/src/tests/reader_streaming.rs` and `xtask/src/pdf_deps.rs`; PDF Place and clipboard paste retain live text (synthetic regressions); EPS ordinary Save retains the page frame and editable document (2026-10-26); `.ai`/EPS editing data checked against a user's files (2026-10-30): case setting (`ate::tests`, `tests_native::type_from_the_text_document_keeps_its_case_setting`), placed-file placements (`tests_native::a_small_placed_file_goes_where_it_draws_closer_to_the_page`), pages cropped to the art (`tests_native::type_on_the_copies_of_a_page_cropped_to_the_art_is_read_once`), mesh corner weights and state (`ai::mesh::tests::corners_with_handle_weights_of_zero_are_read`, `ai::tests::a_gradient_mesh_takes_the_transparency_written_after_it`), type on a path spacing (`tests_native::type_round_a_circle_is_spaced_as_the_file_lays_it_out`; the distance from the path under Align to Path comes from VectorCraft's font metrics, and the fit under Gravity does not reproduce the file's layout), blend state (`ai::tests::a_blends_transparency_follows_its_record`); scores and estimates unchanged. |
+| File formats | 6 | 75% | `.ai` files open with a flattened or wrong layer structure in real cases (#951), no writing of Illustrator's editing data (#868), FreeHand/CorelDRAW/DWG/HEIC import, 3D export; see [file-format-parity.md](file-format-parity.md); EPS legacy mesh/opacity-mask and raster comparison follow-up verified | 10–20 | estimated (lowered from 85%: open issues); DXF control-point SPLINE import closure regression-tested (#1299 follow-up after #1320); PDF writer metadata, reader streaming and immutable backend checks in `crates/pdf/src/tests.rs`, `crates/pdf/src/tests/reader_streaming.rs` and `xtask/src/pdf_deps.rs`; PDF Place and clipboard paste retain live text (synthetic regressions); EPS ordinary Save retains the page frame and editable document (2026-10-26); `.ai`/EPS editing data checked against a user's files (2026-10-30): case setting (`ate::tests`, `tests_native::type_from_the_text_document_keeps_its_case_setting`), placed-file placements (`tests_native::a_small_placed_file_goes_where_it_draws_closer_to_the_page`), pages cropped to the art (`tests_native::type_on_the_copies_of_a_page_cropped_to_the_art_is_read_once`), mesh corner weights and state (`ai::mesh::tests::corners_with_handle_weights_of_zero_are_read`, `ai::tests::a_gradient_mesh_takes_the_transparency_written_after_it`), type on a path spacing (`tests_native::type_round_a_circle_is_spaced_as_the_file_lays_it_out`; the distance from the path under Align to Path is measured from the top of each character's em box, half the height of the top of its H or the bottom of its font's bounding box (`tests_native::aligned_type_lies_as_far_from_its_path_as_the_file_lays_it_out`), and the fit under Gravity does not reproduce the file's layout), blend state (`ai::tests::a_blends_transparency_follows_its_record`); scores and estimates unchanged. |
 | File formats | 6 | 75% | `.ai` files open with a flattened or wrong layer structure in real cases (#951), a saved `.ai`'s editing copy without live effects on objects other than paths, compound paths and groups that qualify (at most a fill and a stroke, a non-zero fill rule when filled, no large canvas) and whose appearance and effects the art-style writer supports, and with live objects as their art (#868), FreeHand/CorelDRAW/DWG/HEIC import, textures, map art and shading in 3D export; see [file-format-parity.md](file-format-parity.md); EPS legacy mesh/opacity-mask and raster comparison follow-up verified | 10–20 | estimated (lowered from 85%: open issues); DXF control-point SPLINE import closure regression-tested (#1299 follow-up after #1320); PDF writer metadata, reader streaming and immutable backend checks in `crates/pdf/src/tests.rs`, `crates/pdf/src/tests/reader_streaming.rs` and `xtask/src/pdf_deps.rs`; PDF Place and clipboard paste retain live text (synthetic regressions); EPS ordinary Save retains the page frame and editable document (2026-10-26); `.ai`/EPS editing data checked against a user's files (2026-10-30): case setting (`ate::tests`, `tests_native::type_from_the_text_document_keeps_its_case_setting`), placed-file placements (`tests_native::a_small_placed_file_goes_where_it_draws_closer_to_the_page`), pages cropped to the art (`tests_native::type_on_the_copies_of_a_page_cropped_to_the_art_is_read_once`), mesh corner weights and state (`ai::mesh::tests::corners_with_handle_weights_of_zero_are_read`, `ai::tests::a_gradient_mesh_takes_the_transparency_written_after_it`), type on a path spacing (`tests_native::type_round_a_circle_is_spaced_as_the_file_lays_it_out`), blend state (`ai::tests::a_blends_transparency_follows_its_record`); scores and estimates unchanged. |
 | File formats | 6 | 75% | `.ai` files open with a flattened or wrong layer structure in real cases (#951), a saved `.ai`'s editing copy without live effects on objects other than paths, compound paths and groups that qualify (at most a fill and a stroke, a non-zero fill rule when filled, no large canvas) and whose appearance and effects the art-style writer supports, and with live objects as their art (#868), FreeHand/CorelDRAW/DWG/HEIC import, 3D export; see [file-format-parity.md](file-format-parity.md); EPS legacy mesh/opacity-mask and raster comparison follow-up verified | 10–20 | estimated (lowered from 85%: open issues); DXF control-point SPLINE import closure regression-tested (#1299 follow-up after #1320); PDF writer metadata, reader streaming and immutable backend checks in `crates/pdf/src/tests.rs`, `crates/pdf/src/tests/reader_streaming.rs` and `xtask/src/pdf_deps.rs`; PDF Place and clipboard paste retain live text (synthetic regressions); SVG CSS classes survive export and repeated import in all four styling modes (#2480); current-main integration retains event attributes and scripts; EPS ordinary Save retains the page frame and editable document (2026-10-26); `.ai`/EPS editing data checked against a user's files (2026-10-30): case setting (`ate::tests`, `tests_native::type_from_the_text_document_keeps_its_case_setting`), placed-file placements (`tests_native::a_small_placed_file_goes_where_it_draws_closer_to_the_page`), pages cropped to the art (`tests_native::type_on_the_copies_of_a_page_cropped_to_the_art_is_read_once`), mesh corner weights and state (`ai::mesh::tests::corners_with_handle_weights_of_zero_are_read`, `ai::tests::a_gradient_mesh_takes_the_transparency_written_after_it`), type on a path spacing (`tests_native::type_round_a_circle_is_spaced_as_the_file_lays_it_out`), blend state (`ai::tests::a_blends_transparency_follows_its_record`); scores and estimates unchanged. |
 | View & navigation | 3 | 70% | multiple windows and the rest of Arrange (Cascade, Float in Window, Float All in Windows) | 9–14 | estimated; Window › Arrange › Tile and Consolidate All Windows done (score/hours unchanged); document-tab artwork hover/copy and lossless transfer tested (2026-10-22; score/hours unchanged); cached canvas reprojection preserves scale during resize, rotation and DPI changes (regression and contributor original-file evidence below; scores/hours unchanged) |
@@ -1060,6 +1060,7 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
   Object › Flatten Transparency, the Flattener Preview, and EPS, PDF and print output that flatten transparency stop building a group's flat regions at the first region past the raster/vector balance's limit (10^(balance/20), rounded down) and rasterize the whole group without building the remaining regions. Building every region gives the same flattened art and the same files. With Clip Complex Regions on, a group builds every region and its image is clipped to them.
   New Symbol and Redefine Symbol on a frame of threaded text take it out of the thread with the text it shows, which the symbol's art holds, and the other frames keep the text they hold. When the last frame goes into the symbol, the text it has no room for goes after the text of the last frame that stays. When every frame of a thread goes into the symbol, the copy of the last frame keeps all its text.
   With Optical Margin Alignment on, or Roman Hanging Punctuation on in the first paragraph, the glyphs at the ends of left-to-right type on a path hang outside its brackets, measured along the path. The type hangs at the start bracket when its line is placed there, hangs at the end bracket when the line is placed there, and hangs at both when it is centered. Glyphs that hang past the end bracket do not make the type overflow, and a hang stops at an open path's end. SVG export writes such type as outlines.
+  Type on a Path Options › Align to Path (option names as in [Create type on a path](https://helpx.adobe.com/illustrator/desktop/design-with-text/edit-format-text/create-type-on-a-path.html)) moves each character by its own font, size and vertical scale: Ascender runs the top of the font's em box along the path (the ideographic em box that its `BASE` table, its typographic or `hhea` box or its ideographs give, else an em box centered on the cap height), Descender runs the bottom of the font's bounding box along it, and Center runs a line at half the height of the top of the font's H above the baseline along it. In vertical type, Ascender and Descender move the characters half an em, and Center leaves them on the path. These distances are VectorCraft's own values (`tests::on_path_align_runs_each_glyph_by_its_own_metrics`, `tests::on_path_align_finds_the_em_box_of_each_kind_of_face`, `tests::on_path_align_in_vertical_type_moves_half_an_em`).
   The frames of threaded text share one Optical Margin Alignment setting: turning it on or off in one frame sets it in every frame, threading frames gives the thread its first frame's setting, and frames taken out of a thread keep it.
   The frames of threaded text share one writing direction: Type › Type Orientation (`type.orientation.vertical`, `type.orientation.horizontal`) in one frame sets every frame, threading frames gives the thread its first frame's direction, frames taken out of a thread keep theirs, and the story flows through every frame in the thread's direction.
   Type › Optical Margin Alignment (`type.opticalMarginAlignment`) hangs the punctuation and letter edges at the ends of a type object's lines outside its margins: at the left of left-aligned lines, at the right of right-aligned lines, and at both ends of centered and justified lines, in point and area type of left-to-right paragraphs. Quotation marks, hyphens, full stops and commas hang wholly; asterisks, tildes, ellipses, en and em dashes, colons and semicolons hang by half; and A, V, W, Y, v, w and y hang by a tenth of their width. It is off by default and saved with the type object. Justification's Glyph Scaling leaves the glyphs that hang at their width, so they hang exactly their share, and Standard burasagari counts what hangs at a line's start as room before hanging a comma; `crates/text/src/tests/hang.rs` checks whole paragraphs with both composers, ragged, centred and justified, with Line-end Punctuation Half Width and bidirectional lines.