Merge pull request #7914 from dotCooCoo/fix/eraser-varied-drag-area

Eraser: the drag's area outline takes the tip the pen gives at each step
This commit is contained in:
BFlat
2026-11-16 04:30:09 +07:00
committed by GitHub
5 changed files with 564 additions and 57 deletions
+3 -1
View File
@@ -5765,7 +5765,9 @@ the drag takes what the pen read there (the points' pressure, tilt and rotation,
drag without that reading, such as a mouse drag, erases at the value itself. One Random value per drag, which way
Tilt, Bearing and Rotation run, and the value itself without a reading are VectorCraft's own rules.
The command refuses another mode, and a variation below 0 or past its range, and erases nothing. In the desktop app
the Eraser's tip outline at the pointer takes the angle, roundness and size the pen gives while it erases.
the Eraser's tip outline at the pointer takes the angle, roundness and size the pen gives while it erases, and the
outline of the area a drag covers takes, at each step, the tip the pen's readings give halfway along it. A Random
value shows as the value itself there, since the release draws it.
`tool.setOption {tool: "eraser"}` takes the same keys.
These commands refuse a string or another value that is not a number with `` `dy` must be a number, not "10" ``,
+2 -2
View File
@@ -1179,8 +1179,8 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur
Alt-drag with the Knife cuts in a straight line, and Shift+Alt-drag cuts at 45° or 90°, as [Cut objects using the Knife and Scissors tools](https://web.archive.org/web/20260926095638/https://helpx.adobe.com/illustrator/desktop/manage-objects/edit-objects/cut-objects.html) and [Default keyboard shortcuts](https://web.archive.org/web/20260726060015/https://helpx.adobe.com/illustrator/using/default-keyboard-shortcuts.html) describe. Alt counts only when held at the press; the dashed line runs from the press point to the pointer, stays straight after Alt is let go, and release sends `path.knife` with those two points. Alt pressed after the press leaves the cut freehand. Shift+Alt keeps the endpoint at 45° steps from the horizontal and vertical, whatever the Constrain Angle.
With Smart Guides on, a straight Knife cut snaps to anchor points and paths: [Cut objects using the Knife and Scissors tools](https://helpx.adobe.com/illustrator/desktop/manage-objects/edit-objects/cut-objects.html) describes the Knife snapping to anchor points and paths while Smart Guides are on. Its ends snap as the ends of the Pencil's straight line do, to anchor points and path segments of art that is shown: the press, and the release of an Alt-drag. Shift+Alt steps 45° from the snapped press, and its release stays on that step. With Smart Guides off, or with Snap to Pixel or Snap to Grid on, the cut is not snapped. The dashed line and `path.knife` use the snapped points.
Eraser Tool Options has Angle and Roundness besides Size, as [Erase paths using the Eraser tool](https://helpx.adobe.com/illustrator/desktop/draw-shapes-and-paths/modify-paths/erase-paths-using-eraser-tool.html) describes: the Eraser's tip is an ellipse Size across, its long axis at Angle and its short axis Roundness percent of the long one, and a drag with a tip that is not round shows the outline of the area it erases (`path.eraseRegion` `angle` and `roundness`).
Eraser Tool Options gives Angle, Roundness and Size each a menu of Fixed, Random, Pressure, Tilt, Bearing and Rotation with a Variation field, as the same page describes: the tip varies by up to the Variation either way, Random once per drag and the others with what the pen reads at each point of the drag, and the tip outline at the pointer follows the pen while it erases. The outline of the area a drag shows keeps the set Angle and Roundness, and a mouse drag erases at the set values (`path.eraseRegion` `angleMode`, `roundnessMode`, `sizeMode` and their variations).
The outline a Blob Brush or Eraser drag shows is built a bounded amount per frame, so a long stroke does not slow the canvas: each frame takes at most 256 new points of the drag and outlines again only the pieces of up to 32 segments they change, and the parts of a piece's outline inside the rest of the area are removed a limited amount at a time. While work is left, the canvas draws again with the pointer still, the points not outlined yet show as a thin line, and the tip shows at the pointer. With Size set to Pressure the outline also shows only the edge of the whole area. The release sends the whole stroke as before (`path.blob`, `path.eraseRegion`).
Eraser Tool Options gives Angle, Roundness and Size each a menu of Fixed, Random, Pressure, Tilt, Bearing and Rotation with a Variation field, as the same page describes: the tip varies by up to the Variation either way, Random once per drag and the others with what the pen reads at each point of the drag, and the tip outline at the pointer follows the pen while it erases. The outline of the area a drag shows takes, at each step, the tip the pen's readings give halfway along it, with a Random value shown as the value itself, and a mouse drag erases at the set values (`path.eraseRegion` `angleMode`, `roundnessMode`, `sizeMode` and their variations).
The outline a Blob Brush or Eraser drag shows is built a bounded amount per frame, so a long stroke does not slow the canvas: each frame takes at most 256 new points of the drag and outlines again only the pieces of up to 32 segments they change, and the parts of a piece's outline inside the rest of the area are removed a limited amount at a time. While work is left, the canvas draws again with the pointer still, the points not outlined yet show as a thin line, and the tip shows at the pointer. When the tip varies with the pen (Size set to Pressure, or an Eraser mode that follows the pen), each step is its own piece and the outline also shows only the edge of the whole area. The release sends the whole stroke as before (`path.blob`, `path.eraseRegion`).
The settled part of that outline is kept in paths of up to 64 pieces each. A path is shared from one frame to the next until a piece in it changes, and the canvas keeps the triangles it drew the path with while the view stays the same, so a frame does not copy, flatten or tessellate a settled path again; a pan, zoom or rotation draws each one once more. This is VectorCraft's own rule. The outline of a drag with a round Eraser tip is drawn whole each frame.
- **Transform:** Rotate, Reflect, Scale, Shear (click or Alt-click snaps the reference point to anchors and centres; Alt-click opens the tool's dialog, and a drag with Alt down at the release, from the press or pressed mid-drag, transforms a copy), Reshape, Free Transform (free and perspective distort and shear, switched by the keys held during a handle drag).
A Reshape drag stretches part of a path from the dragged point without losing the path's general form, as [Adjust path segments](https://helpx.adobe.com/illustrator/desktop/draw-shapes-and-paths/modify-paths/adjust-path-segments.html) has it. On an open path the stretch reaches both ends: the end anchors stay in place, each anchor between moves less the nearer it lies to an end, and the handles of a smooth anchor stay in line (`path.reshape`; the reach and the shares are VectorCraft's own rule, in `docs/mcp.md`). A click sets a focal point and a click on a segment adds a highlighted anchor there; Shift-click adds more, and a drag from any of them moves them all. The anchors that are not direct-selected stay in place and a closed path selected whole moves whole (VectorCraft's own rule, in `docs/mcp.md`).