Merge pull request #6578 from dotCooCoo/fix/print-bitmap-side-limit

Print: Print as Bitmap prints all of a page longer than 32,768 pixels

crates/engine/src/cmd/print.rs

@@ -23,7 +23,7 @@ pub fn specs() -> Vec<CommandSpec> {
             "Print Setup",
             [],
             None,
-            "{preset?: name ([Default] or a saved print preset, any case: print.presets.list; its settings replace the document's, as choosing it in the Print dialog does), settings?: {copies: 1 (1–999), collate: true, reverse, artboards: all|range|ignore (all the art as one page), range: \"1-3, 5\" (1-based, with artboards: range), skipBlank (leave out artboards with no art that prints), media: letter|legal|tabloid|a3|a4|a5|a6|b4|b5|b4 (jis)|b5 (jis)|b6 (jis)|japanese postcard|japanese double postcard|japanese envelope #3|japanese envelope #4|kaku #2|kaku #3|yonroku-ban|custom (a paper is named by its id or its dialog label, any case and spacing, so `B5 (JIS)` works; b4 and b5 stay the ISO 216 sizes, 250 × 353 and 176 × 250 mm, and the JIS sizes are b4 (jis) 257 × 364 mm, b5 (jis) 182 × 257 mm and b6 (jis) 128 × 182 mm), width, height (custom paper, 72–14400 pt), orientation: portrait|landscape|portraitFlipped|landscapeFlipped, autoRotate: true (turn the paper to each artboard; orientation ignored), transverse (the page a quarter turn on the paper), printLayers: visiblePrintable|visible|all (template layers never print), placement: {origin: topLeft|top|topRight|left|center|right|bottomLeft|bottom|bottomRight (the point of the printed area, the artboard with its bleed and marks, on the same point of the imageable area), x, y (pt, right and down)}, scaling: none|fit|custom|tileFull|tileImageable, scale: {width: 100, height: 100} (% with custom and tiling), overlap: 0 (pt between tiles), tileRange: \"\" (1-based tiles across then down; empty: all), copiesPerSheet: false (not with tiling: as many copies of each artboard, with its bleed and marks, as fit the imageable area, across then down, not turned; the placement places the grid; an artboard that doesn't fit prints one copy per sheet, with a warning), gutter: 0 (pt between copies, 0–720), margin: 0 (pt the device can't print around the paper: the imageable area is inside it), marks: {trim, registration, colorBars, pageInfo, kind: roman|japanese, weight: 0.25, offset: 6} (as document.exportPdf, at the paper's scale; page information adds the tile and the ink), bleed: {useDocument: true (the document's bleed, document.setup), top, bottom, left, right} (pt), output: {mode: composite|separations (one grey page per ink that prints), emulsion: up|down (down mirrors), image: positive|negative, spotsToProcess, inks: [{name: \"Cyan\"|…|a spot swatch, print: true, frequency (lpi, default 60), angle (default C 15, M 75, Y 0, K 45, spots 45)}]}, graphics: {autoFlatness: true, flatness: 1 (0.2–100), fonts: none|subset|complete}, color: {intent: perceptual|relativeColorimetric|saturation|absoluteColorimetric, preserveNumbers: true (CMYK colours keep their values), profile: \"\" (the printer profile, an RGB or CMYK one: composite PDF colours are converted to it with the intent, separations separate with a CMYK one; empty: as they are)}, advanced: {printAsBitmap (composite pages print as one image each, at the document's raster effects resolution), overprints: preserve|discard|simulate (composite output; preserve writes them to overprint (/OP), simulate prints them as Overprint Preview shows them; separations always keep them), flattenerPreset: \"\" (a flattener preset, built-in or saved: transparency is flattened before printing; empty: it prints live; PostScript defaults to medium)}, tileOrigin: {placed: false, x, y} (where the Print Tiling tool put the pages: print.tiling.set)}} store the print settings with the document, over the ones it has or the preset's (null keeps a value), as one undo step; no settings or preset → {settings} (the current ones, defaults if never set up)",
+            "{preset?: name ([Default] or a saved print preset, any case: print.presets.list; its settings replace the document's, as choosing it in the Print dialog does), settings?: {copies: 1 (1–999), collate: true, reverse, artboards: all|range|ignore (all the art as one page), range: \"1-3, 5\" (1-based, with artboards: range), skipBlank (leave out artboards with no art that prints), media: letter|legal|tabloid|a3|a4|a5|a6|b4|b5|b4 (jis)|b5 (jis)|b6 (jis)|japanese postcard|japanese double postcard|japanese envelope #3|japanese envelope #4|kaku #2|kaku #3|yonroku-ban|custom (a paper is named by its id or its dialog label, any case and spacing, so `B5 (JIS)` works; b4 and b5 stay the ISO 216 sizes, 250 × 353 and 176 × 250 mm, and the JIS sizes are b4 (jis) 257 × 364 mm, b5 (jis) 182 × 257 mm and b6 (jis) 128 × 182 mm), width, height (custom paper, 72–14400 pt), orientation: portrait|landscape|portraitFlipped|landscapeFlipped, autoRotate: true (turn the paper to each artboard; orientation ignored), transverse (the page a quarter turn on the paper), printLayers: visiblePrintable|visible|all (template layers never print), placement: {origin: topLeft|top|topRight|left|center|right|bottomLeft|bottom|bottomRight (the point of the printed area, the artboard with its bleed and marks, on the same point of the imageable area), x, y (pt, right and down)}, scaling: none|fit|custom|tileFull|tileImageable, scale: {width: 100, height: 100} (% with custom and tiling), overlap: 0 (pt between tiles), tileRange: \"\" (1-based tiles across then down; empty: all), copiesPerSheet: false (not with tiling: as many copies of each artboard, with its bleed and marks, as fit the imageable area, across then down, not turned; the placement places the grid; an artboard that doesn't fit prints one copy per sheet, with a warning), gutter: 0 (pt between copies, 0–720), margin: 0 (pt the device can't print around the paper: the imageable area is inside it), marks: {trim, registration, colorBars, pageInfo, kind: roman|japanese, weight: 0.25, offset: 6} (as document.exportPdf, at the paper's scale; page information adds the tile and the ink), bleed: {useDocument: true (the document's bleed, document.setup), top, bottom, left, right} (pt), output: {mode: composite|separations (one grey page per ink that prints), emulsion: up|down (down mirrors), image: positive|negative, spotsToProcess, inks: [{name: \"Cyan\"|…|a spot swatch, print: true, frequency (lpi, default 60), angle (default C 15, M 75, Y 0, K 45, spots 45)}]}, graphics: {autoFlatness: true, flatness: 1 (0.2–100), fonts: none|subset|complete}, color: {intent: perceptual|relativeColorimetric|saturation|absoluteColorimetric, preserveNumbers: true (CMYK colours keep their values), profile: \"\" (the printer profile, an RGB or CMYK one: composite PDF colours are converted to it with the intent, separations separate with a CMYK one; empty: as they are)}, advanced: {printAsBitmap (composite pages print as one image each, at the document's raster effects resolution, or lower for a page larger than 64 Mpx or 32,768 px a side), overprints: preserve|discard|simulate (composite output; preserve writes them to overprint (/OP), simulate prints them as Overprint Preview shows them; separations always keep them), flattenerPreset: \"\" (a flattener preset, built-in or saved: transparency is flattened before printing; empty: it prints live; PostScript defaults to medium)}, tileOrigin: {placed: false, x, y} (where the Print Tiling tool put the pages: print.tiling.set)}} store the print settings with the document, over the ones it has or the preset's (null keeps a value), as one undo step; no settings or preset → {settings} (the current ones, defaults if never set up)",
             has_doc,
             setup
         ),

crates/engine/src/cmd/printadvanced.rs

@@ -76,9 +76,11 @@ fn bitmap_document(cmd: &str, doc: &Document, set: &PrintSettings, rich_black: b
     let mut images = vec![];
     for (_, r) in regions {
         let area = outset(r, bleed);
-        // At most MAX_PIXELS, and 65535 pixels a side.
+        // At most MAX_PIXELS, and no side longer than the renderer draws (rounded up to whole
+        // pixels below).
         let side = area.width().max(area.height()).max(1.0);
-        let scale = (doc.raster_effects_ppi / 72.0).min((MAX_PIXELS / (area.width() * area.height()).max(1.0)).sqrt()).min(65_535.0 / side);
+        let longest = f64::from(vectorcraft_render::MAX_RASTER_SIDE) - 2.0;
+        let scale = (doc.raster_effects_ppi / 72.0).min((MAX_PIXELS / (area.width() * area.height()).max(1.0)).sqrt()).min(longest / side);
         if !(scale.is_finite() && scale > 0.0) {
             continue;
         }

crates/engine/src/tests/printadvanced.rs

@@ -130,6 +130,28 @@ fn print_as_bitmap_prints_an_image_of_each_artboard() {
     assert!(crate::cmd::printadvanced::prepare("file.print", doc(&s), &set, &saved, false).unwrap().is_none());
 }
 
+/// Print as Bitmap of an artboard longer than the renderer draws at the raster effects resolution
+/// (32,768 pixels a side) prints an image of all of it, at a lower resolution.
+#[test]
+fn print_as_bitmap_prints_all_of_a_long_artboard() {
+    let mut s = Session::new();
+    s.execute("file.new", &json!({"width": 9000, "height": 100})).unwrap();
+    s.execute("document.rasterEffectsSettings", &json!({"resolution": 300})).unwrap();
+    s.execute("shape.rectangle", &json!({"x": 0, "y": 0, "width": 9000, "height": 100})).unwrap();
+    let set = settings(json!({"advanced": {"printAsBitmap": true}}));
+    let saved = s.prefs.flattener_presets.clone();
+    let bitmap = crate::cmd::printadvanced::prepare("file.print", doc(&s), &set, &saved, false).unwrap().unwrap();
+    let mut placed = vec![];
+    bitmap.walk(|n| {
+        if let NodeKind::Image(im) = &n.kind {
+            placed.push((im.width, im.xf.transform_rect_bbox(Rect::new(0.0, 0.0, f64::from(im.width), f64::from(im.height)))));
+        }
+    });
+    let [(width, b)] = placed[..] else { panic!("one image: {placed:?}") };
+    assert!(width <= vectorcraft_render::MAX_RASTER_SIDE, "{width} pixels");
+    assert!(b.x0 <= 0.0 && b.x1 >= 9000.0, "the image covers the artboard: {b:?}");
+}
+
 /// Appearance of Black › Printing / Exporting (#394): Print as Bitmap draws pure CMYK black as RGB
 /// black when `rich_black` is on.
 #[test]