diff --git a/crates/tools/src/draw2/gesture.rs b/crates/tools/src/draw2/gesture.rs index c3191c4363..1bf6a9488b 100644 --- a/crates/tools/src/draw2/gesture.rs +++ b/crates/tools/src/draw2/gesture.rs @@ -6,9 +6,9 @@ //! points with straight segments and the release fits them; Alt on release (or ending near the start) closes the path, and starting //! near an end of a selected open path continues it. Shift held at the press draws a straight //! Pencil line at 45° steps from the Constrain Angle instead, and Alt held at the press (with Alt -//! key toggles to Smooth Tool off) draws a straight line at any angle. The Pencil's new path starts and ends on -//! Smart Guides ([`DrawSnap`]: an anchor, a path, in line with the art), hovering too; the points -//! between follow the hand. The Paintbrush records the pen pressure of each point (a stroke a pen +//! key toggles to Smooth Tool off) draws a straight line at any angle. The Pencil ignores Smart +//! Guides and Snap to Point: it shows no Smart Guides, hovering or drawing, and its ends follow the +//! hand. Snap to Grid and Snap to Pixel still move its ends (`grid_snaps`). The Paintbrush records the pen pressure of each point (a stroke a pen //! pressed less than fully on sends `[x, y, pressure]` points) for pressure-sensitive brushes, and //! the pen's tilt and barrel rotation where the pen reads them (`[x, y, pressure, tiltX, tiltY, //! rotation]` points, `null` for what a point lacks) for brushes that vary with them. The Blob @@ -860,27 +860,29 @@ impl GestureTool { } } - /// Do the ends of its strokes snap (the Pencil)? - fn snaps(&self) -> bool { - self.id == "pencil" - } - /// Does a straight Knife cut snap to anchors and paths? Only with Smart Guides on, which Snap to - /// Pixel (for drawing) and Snap to Grid turn off (`PointSnap::new`). Its ends snap as the - /// Pencil's straight line's do: the press, and the release unless Shift keeps it on a 45° step. + /// Pixel (for drawing) and Snap to Grid turn off (`PointSnap::new`). Its ends snap: the press, + /// and the release unless Shift keeps it on a 45° step. fn knife_snaps(&self, cx: &ToolContext) -> bool { self.id == "knife" && self.straight && cx.smart_guides && !cx.snaps_to_pixel(crate::PixelOp::Drawing) && !cx.snap_to_grid } - /// Does the end of a straight line snap: the Pencil's Alt line's, or a straight Knife cut's - /// without Shift? + /// Do the Pencil's ends snap? Only to the grid or to pixels, with View → Snap to Grid or Snap + /// to Pixel on: those are separate from Smart Guides (and turn them off), and the grid case is + /// its own question (#2958). Smart Guides and Snap to Point never move them. + fn grid_snaps(&self, cx: &ToolContext) -> bool { + self.id == "pencil" && (cx.snap_to_grid || cx.snaps_to_pixel(crate::PixelOp::Drawing)) + } + + /// Does the end of a straight line without Shift snap: the Pencil's Alt line's to the grid or + /// pixels, a straight Knife cut's to anchors and paths? fn line_end_snaps(&self, cx: &ToolContext) -> bool { - self.straight && self.unconstrained && (self.snaps() || self.knife_snaps(cx)) + self.straight && self.unconstrained && (self.grid_snaps(cx) || self.knife_snaps(cx)) } /// Where a stroke or straight line released at `p` ends: where it snaps when its end snaps. fn release_end(&mut self, cx: &ToolContext, p: Point) -> Point { - if (self.snaps() && !self.smoothing && !self.straight) || self.line_end_snaps(cx) { self.snap.drag(cx, p, None) } else { p } + if (self.grid_snaps(cx) && !self.smoothing && !self.straight) || self.line_end_snaps(cx) { self.snap.drag(cx, p, None) } else { p } } /// Is a straight line with its end at `end` back at its press point (within a pixel), so that @@ -1299,10 +1301,6 @@ impl Tool for GestureTool { self.tip_at = (!ev.mods.cmd && !self.blob_alt_smooths(ev.mods)).then_some(p); } match ev.kind { - PointerKind::Move if self.snaps() => { - self.snap.hover(cx, p, &[], None); - vec![] - } PointerKind::Down => { self.active = true; self.began = false; @@ -1326,11 +1324,12 @@ impl Tool for GestureTool { _ => vec![], }; self.redraw = if self.draws_path() && !self.smoothing && self.extend.is_none() { self.find_redraw(cx, p) } else { None }; - // A path continued starts at its end, one redrawn on it; a new one where it snaps. - // A straight line is constrained from the end it continues, so it starts there. + // A path continued starts at its end, one redrawn on it; a new one at the press, + // or on the grid or a pixel when they snap. A straight line is constrained from the + // end it continues, so it starts there. let start = if let Some((_, _, end)) = extend.filter(|_| self.straight) { end - } else if self.snaps() && !self.smoothing && self.extend.is_none() && self.redraw.is_none() { + } else if self.grid_snaps(cx) && !self.smoothing && self.extend.is_none() && self.redraw.is_none() { self.snap.press(cx, p, &[], None) } else if self.knife_snaps(cx) { // A straight Knife cut, its overlay and Shift's 45° steps start from the snapped point. @@ -1354,13 +1353,13 @@ impl Tool for GestureTool { self.moved |= self.points.first().is_some_and(|start| p.distance(*start) > vectorcraft_geom::EPS); let p = self.constrained(cx, p, ev.mods); let mut end = p; - if self.snaps() && !self.smoothing && !self.straight { - // Where the stroke would end: shown, taken on release. + if self.grid_snaps(cx) && !self.smoothing && !self.straight { + // Where the stroke would end on the grid or a pixel: taken on release. end = self.snap.drag(cx, p, None); } let p = if self.line_end_snaps(cx) { - // Alt's line ends where a stroke would, and a Knife cut's on the anchors and - // paths its press snaps to: shown, taken on release. + // Alt's line ends on the grid or a pixel when they snap, and a Knife cut on the + // anchors and paths its press snaps to: shown, taken on release. self.snap.drag(cx, p, None) } else { p @@ -1382,7 +1381,7 @@ impl Tool for GestureTool { } else if self.points.last().is_some_and(|l| l.distance(p) < cx.tol(1.0)) || self.points.len() >= crate::MAX_STROKE_SAMPLES { // A release here keeps the last point unless it snaps (`Up`), so the ring // follows the point `finish` will test. - let kept = self.points.last().copied().filter(|l| l.distance(p) < cx.tol(1.0) && !self.snaps()); + let kept = self.points.last().copied().filter(|l| l.distance(p) < cx.tol(1.0) && !self.grid_snaps(cx)); let release_end = kept.unwrap_or(end); self.near_start = self.release_closes_near_start(cx, release_end); self.connects = self.connects_at(cx, release_end).is_some(); @@ -1439,7 +1438,7 @@ impl Tool for GestureTool { } } else if self.points.last().is_some_and(|l| l.distance(p) >= cx.tol(1.0)) { self.push(end, ev); - } else if self.snaps() + } else if self.grid_snaps(cx) && !self.smoothing && self.points.len() > 1 && let Some(last) = self.points.last_mut() diff --git a/crates/tools/src/draw2/gesture/tests.rs b/crates/tools/src/draw2/gesture/tests.rs index 33d6520b84..b62226692a 100644 --- a/crates/tools/src/draw2/gesture/tests.rs +++ b/crates/tools/src/draw2/gesture/tests.rs @@ -22,25 +22,67 @@ fn drag_held(t: &mut GestureTool, cx: &ToolContext, pts: &[(f64, f64)], m: Mods) v } -/// The Pencil's new path starts and ends on Smart Guides (#506), the points between where -/// the hand went. +/// The Pencil follows the hand from the press to the release: it ignores Smart Guides and Snap to Point and shows no +/// Smart Guides, hovering or drawing over the art, with Smart Guides on or with only Snap to Point. #[test] -fn pencil_ends_snap_to_smart_guides() { +fn pencil_follows_the_hand_and_shows_no_smart_guides() { let (d, _) = doc_with_rect(); let s = Selection::default(); let p = paint(); - let cx = cx(&d, &s, &p); - let mut t = GestureTool::new("pencil"); - let acts = drag(&mut t, &cx, &[(102.0, 98.0), (151.0, 300.0), (250.0, 320.0), (198.0, 203.0)], Mods::default()); - let Some(Action::Preview(_, v)) = acts.last().and_then(|a| a.first()) else { panic!("{acts:?}") }; - assert_eq!(v["points"], json!([[100.0, 100.0], [151.0, 300.0], [250.0, 320.0], [200.0, 200.0]])); + let on = cx(&d, &s, &p); + let snap_to_point = ToolContext { smart_guides: false, ..cx(&d, &s, &p) }; + // Near the corners at (100, 100) and (200, 200), within Snap to Point's 2 px of them. + let hand = [(101.0, 99.0), (151.0, 300.0), (250.0, 320.0), (199.0, 201.0)]; + for cx in [&on, &snap_to_point] { + let mut t = GestureTool::new("pencil"); + t.pointer(cx, &PointerEvent::new(PointerKind::Move, hand[0].0, hand[0].1)); + assert!(t.overlays(cx).is_empty(), "hovering: {:?}", t.overlays(cx)); + t.pointer(cx, &PointerEvent::new(PointerKind::Down, hand[0].0, hand[0].1)); + for &(x, y) in &hand[1..] { + t.pointer(cx, &PointerEvent::new(PointerKind::Drag, x, y)); + assert!(t.snap.guides().is_empty(), "drawing: {:?}", t.snap.guides()); + } + let last = hand[hand.len() - 1]; + let acts = t.pointer(cx, &PointerEvent::new(PointerKind::Up, last.0, last.1)); + let Some(Action::Preview(_, v)) = acts.first() else { panic!("{acts:?}") }; + assert_eq!(v["points"], json!(hand.map(|(x, y)| [x, y]))); + } // The Paintbrush follows the hand all the way. let mut t = GestureTool::new("paintbrush"); - let acts = drag(&mut t, &cx, &[(102.0, 98.0), (151.0, 300.0)], Mods::default()); + let acts = drag(&mut t, &on, &[(102.0, 98.0), (151.0, 300.0)], Mods::default()); let Some(Action::Preview(_, v)) = acts.last().and_then(|a| a.first()) else { panic!("{acts:?}") }; assert_eq!(v["points"][0], json!([102.0, 98.0])); } +/// Snap to Grid and Snap to Pixel are not Smart Guides: they still move the Pencil's ends (and an +/// Alt line's), while the points between follow the hand. +#[test] +fn pencil_ends_still_snap_to_the_grid_and_pixels() { + let (d, _) = doc_with_rect(); + let s = Selection::default(); + let p = paint(); + let grid = ToolContext { snap_to_grid: true, ..cx(&d, &s, &p) }; + let pixel = ToolContext { snap_to_pixel: true, ..cx(&d, &s, &p) }; + let on = |cx: &ToolContext, q: (f64, f64)| match cx.snap_to_grid { + true => vectorcraft_geom::snap::snap_point_to_grid(Point::new(q.0, q.1), cx.grid_step()), + false => Point::new(q.0.round(), q.1.round()), + }; + let hand = [(301.3, 302.6), (351.4, 420.2), (447.7, 452.9)]; + for cx in [&grid, &pixel] { + let (first, last) = (on(cx, hand[0]), on(cx, hand[2])); + assert!(first != Point::new(hand[0].0, hand[0].1) && last != Point::new(hand[2].0, hand[2].1)); + let mut t = GestureTool::new("pencil"); + let acts = drag(&mut t, cx, &hand, Mods::default()); + let Some(Action::Preview(_, v)) = acts.last().and_then(|a| a.first()) else { panic!("{acts:?}") }; + assert_eq!(v["points"], json!([[first.x, first.y], [351.4, 420.2], [last.x, last.y]])); + // Alt's straight line ends on the grid or a pixel too. + let mut t = GestureTool::new("pencil"); + let acts = drag_held(&mut t, cx, &[hand[0], hand[2]], Mods { alt: true, ..Mods::default() }); + let Some(Action::Preview(_, v)) = acts.last().and_then(|a| a.first()) else { panic!("{acts:?}") }; + assert_eq!(v["points"][1], json!([last.x, last.y])); + } +} + /// #852: the Paintbrush sends each point's pen pressure; a mouse (always fully pressed) and /// the Pencil send plain points. #[test] @@ -693,10 +735,10 @@ fn pencil_shift_draws_a_straight_line_at_45_degree_steps() { } } -/// #3799: a Shift line leaves no Smart Guides of its press on screen while it is dragged -/// (its end doesn't snap), and Alt at its release leaves it open. +/// #3799: a Shift line shows no Smart Guides, at its press or while it is dragged, and Alt at its +/// release leaves it open. #[test] -fn pencil_shift_line_drops_the_press_guides_and_stays_open_with_alt() { +fn pencil_shift_line_shows_no_guides_and_stays_open_with_alt() { let (d, _) = doc_with_rect(); let s = Selection::default(); let p = paint(); @@ -704,7 +746,7 @@ fn pencil_shift_line_drops_the_press_guides_and_stays_open_with_alt() { let shift = Mods { shift: true, ..Default::default() }; let mut t = GestureTool::new("pencil"); t.pointer(&cx, &PointerEvent::new(PointerKind::Down, 102.0, 98.0).with_mods(shift)); - assert!(!t.overlays(&cx).is_empty(), "the press snaps to the corner and shows it"); + assert!(t.snap.guides().is_empty(), "the press: {:?}", t.snap.guides()); t.pointer(&cx, &PointerEvent::new(PointerKind::Drag, 300.0, 140.0).with_mods(shift)); assert!(t.overlays(&cx).is_empty(), "{:?}", t.overlays(&cx)); let shift_alt = Mods { shift: true, alt: true, ..Default::default() }; @@ -1745,10 +1787,11 @@ fn paintbrush_alt_with_a_two_anchor_curve_selected_smooths() { } } -/// #3799: Alt's line starts and ends on Smart Guides as a stroke does, and pressed on an end of -/// a selected open path it continues the path from that end to the pointer. +/// #3799: Alt's line runs from the press to the pointer as a stroke does, snapping to nothing, +/// and pressed on an end of a selected open path it continues the path from that end to the +/// pointer. #[test] -fn pencil_alt_line_snaps_its_ends_and_continues_a_selected_path() { +fn pencil_alt_line_follows_the_hand_and_continues_a_selected_path() { let (mut d, _) = doc_with_rect(); let alt = Mods { alt: true, ..Default::default() }; let p = paint(); @@ -1758,7 +1801,7 @@ fn pencil_alt_line_snaps_its_ends_and_continues_a_selected_path() { let mut t = GestureTool::new("pencil"); let acts = drag_held(&mut t, &cx, &[(102.0, 98.0), (151.0, 300.0), (198.0, 203.0)], alt); let Some(Action::Preview(_, v)) = acts.last().and_then(|a| a.first()) else { panic!("{acts:?}") }; - assert_eq!(v["points"], json!([[100.0, 100.0], [200.0, 200.0]])); + assert_eq!(v["points"], json!([[102.0, 98.0], [198.0, 203.0]])); } let l = d.layers[0].id; let id = d.alloc_id(); diff --git a/docs/mcp.md b/docs/mcp.md index fc03d070b6..71e94ebbf0 100644 --- a/docs/mcp.md +++ b/docs/mcp.md @@ -1,6 +1,6 @@ # VectorCraft MCP server -> **Last updated:** 2026-11-14 · **Change:** Pencil continuation, straight-line and closing cursors; scores and estimates unchanged; no response-shape change. Previously: Snap to Point with Smart Guides off draws no Smart Guides labels or lines, #7250; no response-shape change. Previously: Envelopes: a top object's side whose pieces are all one curve split at anchors follows that curve's parameter (#7097); existing response shapes retained. +> **Last updated:** 2026-11-14 · **Change:** Pencil ignores Smart Guides and Snap to Point and shows no Smart Guides, #7252; no response-shape change. Previously: Pencil continuation, straight-line and closing cursors; scores and estimates unchanged; no response-shape change. Previously: Snap to Point with Smart Guides off draws no Smart Guides labels or lines, #7250; no response-shape change. Previously: Envelopes: a top object's side whose pieces are all one curve split at anchors follows that curve's parameter (#7097); existing response shapes retained. `vectorcraft-cli mcp` runs a [Model Context Protocol](https://modelcontextprotocol.io) server on stdio (newline-delimited JSON-RPC 2.0; see [Protocol](#protocol) for version negotiation). Agents use it to @@ -6317,9 +6317,11 @@ snap the pointer as drawing tools do, so dragging a corner onto another object's ``` Every point a drawing tool places snaps the same way, through one snapper (#506): the Pen's and Curvature tool's -anchors, the Pencil's first and last point, the shape tools' start and dragged corner or radius (`rectangle`, +anchors, the shape tools' start and dragged corner or radius (`rectangle`, `roundedRectangle`, `ellipse`, `polygon`, `star`, `lineSegment`, `arc`, `spiral`, `rectangularGrid`, `polarGrid`), the -Type tool's click and frame, and a new artboard's corners. The point lands on another object's anchor, centre or +Type tool's click and frame, and a new artboard's corners. The Pencil ignores Smart Guides and Snap to Point and +shows no Smart Guides: its strokes and straight lines follow the hand (Snap to Grid and Snap to Pixel still move +their ends). The point lands on another object's anchor, centre or path ("anchor", "center", "path"), else lines up with the anchors, edges and centres of the art and the artboards (a line from the target and "align"); the Pen's lands on the path being drawn too, so a click on its first anchor closes it exactly. With `mods.shift` the point keeps to its 45° step from the anchor before it (from `constrainAngle`; a box @@ -11991,6 +11993,7 @@ the error text. The interactive fallback applies only to ordinary File > Save, n | Date | Change | |---|---| +| 2026-11-13 | The Pencil ignores Smart Guides and Snap to Point and shows no Smart Guides; Snap to Grid and Snap to Pixel still move its ends (#7252). | | 2026-11-13 | `path.freehand`: `closed`, when given, decides whether a stroke that continues a path (`extend`) closes it; the Pencil and the Paintbrush send it by Close Paths When Ends Are Within. | | 2026-11-13 | Snap to Point with Smart Guides off draws no Smart Guides labels or lines (#7250). | | 2026-11-13 | Envelopes: a top object's side whose pieces are all one curve split at anchors follows that curve's parameter (#7097). | diff --git a/docs/target-app-parity.md b/docs/target-app-parity.md index 0a1f7c81b8..e67b3ddd22 100644 --- a/docs/target-app-parity.md +++ b/docs/target-app-parity.md @@ -1,6 +1,6 @@ # Parity with Adobe Illustrator -> **Last reviewed:** 2026-10-10 · **Last updated:** 2026-11-14 · **Change:** minor (Pencil continuation, straight-line and closing cursors; scores and estimates unchanged; previously: G5: Weather Icons joins built-in symbol libraries (Sun, Moon, Cloud, Rain, Thunder, Snow); scores and estimates unchanged; previously: a closed Pencil stroke closes with a straight segment; previously: Snap to Point with Smart Guides off draws no Smart Guides labels or lines, #7250; previously: 3D: the seams of Extrude & Bevel, Inflate and Rotate under a white light, and of the faces of Extrude & Bevel (Classic), Revolve (Classic) and Rotate (Classic), went from miter to round joins, so white-light 3D output is expected to differ from the 2026-10-17 comparison at facet corners (not measured: the scenes were not exported again); previously: `.ai` and EPS import: in layers that don't draw as the page, art that differs away from an envelope of type no longer costs it its editable type; it keeps its drawn art where, in the pixels it and its drawn art ink, the layers with it differ from the page more than its own check allows, or past the envelopes' share of the page check, #7141; Character panel: the Set Font Height Reference dropdown shows an icon before each reference, #6304; scores and estimates unchanged; previously: Envelopes: a top object's side whose pieces are all one curve split at anchors follows that curve's parameter, so a top object saved with its sides' curves in pieces draws as its `.ai` drawn art, #7097; scores and estimates unchanged; previously: Graphic Styles list fills a taller panel, #2992; scores and estimates unchanged; previously: PDF import: glyphs in a span with an empty ActualText come in as outlines, #6971; scores and estimates unchanged; previously: library panels' lists fill a taller panel, #2992; scores and estimates unchanged; previously: Swatches list fills a taller panel, #1638; scores and estimates unchanged; previously minor: Object › Rasterize with the Grayscale or Bitmap colour model makes a grayscale image, #6969; scores and estimates unchanged; previously minor: `.ai` and EPS import: type in an envelope with Distort Appearance is also tried mapped from the box of what it paints, miter tips and moved strokes included, after its glyphs grown by half its strokes' weight (#6824; #6617: Swatches panel menu: Show Recent Colors; scores unchanged; previously minor: icon-strip flyouts also resize from the top edge and the canvas-side top corner, keeping the moved top in workspaces (storytold/craft-libs#1094); scores and estimates unchanged; previously: #6865: explicitly requested oversized editing artboard; macOS: the canvas cursor stays after the pointer moves, #6362; scores and estimates unchanged; previously minor: Type tool: kerning at a caret at the start of a line moves the character after it, #5111; scores and estimates unchanged; previously minor: Rulers: the zero point dragged out of the rulers' corner snaps as a drawn point does; previously minor: Live Paint Bucket fills faces crossed in one drag (#6373); previously: #6404: transform-aware Eyedropper character copying; scores and estimates unchanged; previously: Envelopes: with Distort Appearance, type's strokes paint along the bent glyph outlines at their own weight, as users' `.ai` files draw them, which changes how VectorCraft's own envelopes of stroked type draw (#6644; scores and estimates unchanged); previously minor: G5: Energy Beams brush library; bundled content ~44% → ~46%; previously minor: G5: Skill Icons symbol library; bundled content ~42% → ~44%; previously minor: `.ai` and EPS import: an envelope saved in Edit Contents whose mesh lies away from its drawn art by a move opens live on that art (#6570; scores and estimates unchanged); previously minor: ruler double-click adds a guide at the pointer, #5239; G5: Status Effects graphic style library; bundled content ~40% → ~42%; MCP symbol libraries list UI Frames and Map Markers; previously minor: G5: Inventory Icons built-in symbol library; bundled content ~38% → ~40%; previously minor: `.ai` and EPS import: stroked type in an envelope maps from its glyphs grown by half its stroke (#3179; scores and estimates unchanged); previously minor: `.ai` and EPS import: warps of type open as mesh envelopes on their saved grid where VectorCraft's warp doesn't draw as their drawn art (#3179; scores and estimates unchanged); G5: Game Trails brush library; bundled content ~36% → ~38%; previously minor: Edit › Edit Custom Dictionary…: its dialog adds, deletes and changes the custom dictionary's words, #4936; previously minor: `.ai` and EPS import: envelopes of type open live where they draw as their drawn art and the layers with them draw as the page (#3179; scores and estimates unchanged); G5: Game HUD graphic style library; bundled content ~34% → ~36%; previously minor: Line Arrow arrowhead (#5421; scores and estimates unchanged); G5: Map Markers built-in symbol library; bundled content ~32% → ~34%; previously minor: right-click on type: Spelling › Auto Spell Check, with its check mark, #4936; previously minor: right-click on a word Auto Spell Check underlined: its suggestions, Ignore All and Add to Dictionary, #4936; previously minor: Canvas: a 3D effect changed on type or a group redraws where its solid was; Fit to Artwork Bounds and per-artboard SVG export build each solid once for all artboards; previously minor: Effect Gallery: a thumbnail for each filter and a preview area inside the dialog, on an original drawing; Raster effects 52% → 55%, hours 1–2 → none; headline numbers unchanged; Auto Spell Check: `edit.autoSpellCheck` underlines the unknown words, #4936; previously minor: PDF editable import preserves authored ActualText once, including empty/nested spans and authored ordering (#6165); cross-line/style layout remains approximate; scores and estimates unchanged; PDF marked-text export (#6309): compatible glyphs stay on one layout line with per-glyph offsets; scores and estimates unchanged; G5: UI Frames built-in symbol library with default 9-slice; bundled content ~32%; previously minor: G5: dynamic symbol part on-canvas opacity/blend/gradient/pattern; strokes remaining no longer lists Overlap/auto corners; symbols ~88%; previously minor: interim macOS cursor delivery, #2292; native validation pending; scores and estimates unchanged; previously minor: harakat paint fallback clarified; previously minor: current Guides feature-area rows consolidated using existing ruler evidence; scores and estimates unchanged; previously minor: Control bar › Snapping includes the existing Snap to Glyph and Alignment Guides toggles (#6164); scores and estimates unchanged; previously minor: G5 docs: Art brush Overlap and Pattern brush auto corners removed from strokes remaining; symbols remaining lists dynamic on-canvas beyond solid and guides outside the art; previously minor: custom dictionary and Ignore All: `text.spelling.addWord`, `removeWord`, `changeWord`, `dictionary` and `ignoreAll`, #4936; previously minor: EPS import: embedded fonts (composite, Type 42, CID-keyed, Type 1, CFF FontSet) draw their glyphs; spell check engine: `text.spelling.check` and `text.spelling.suggest` on craft-proof, #4936; previously minor: floating tab groups collapse into the side icon rail and opened rail panels fold back into it, #5925 in part; `.ai`/EPS type keeps its tab stops, and right-aligned lines with tabs lay out as the file's page, #6147; `.ai`/EPS type from the text document lays its lines out closer to the file's page, within limits, #6137; `.ai` and EPS import: older Art brush objects read; numeric fields step on wheel hover without taking keyboard focus, and a panel wheel turn cannot seed a canvas zoom glide, #5949; Character Styles panel: a double-click on a style's row opens its Character Style Options; the dialog keeps a fixed width and scrolls its sections, so its buttons stay on screen; Tools stays beside the canvas with left-side panels; new gradients follow document color mode; Selection QoL: marquee modes and visible feedback, #5313; SVG CSS classes survive export and repeated import in all four styling modes (#2480); current-main integration retains event attributes and scripts; #3380 deletion-only review follow-up: independent survivors keep gradient placement, owned subpaths avoid discarded copies, and contracts/status/evidence are clarified; endpoint highlighting remains open; scores and estimates unchanged; the canvas keeps selection outlines and anchors between frames; Indian-language hyphenation review and license allowlist, #4947; Stroke gradients: an arrowhead aligned to the tip is painted to the corners of its base, #5964; Drop Shadow and glow dialogs: spinner arrows, #5367, #5368; Stroke Weight Up and Down shortcuts, #5797; Hindi catalog and contributor loanword preferences; full wording review in progress; Properties in Edit Artboards: a Transform section with the reference point above the Artboards section, #5219; the Control bar's Stroke: and Opacity: links scrub their fields, #4088; an image zoomed in on is separated, colorized or proofed only where it shows (#4155); a document's first frame renders on the render worker, so opening a heavy file no longer freezes the window, #4155; Control bar Paragraph section with type selected, #5372; translating unchanged type reuses its glyph and character-stroke outlines; scores and estimates unchanged) · **Target:** Adobe Illustrator 2026 (30.x; public release notes through 30.7, August 2026; Units › East Asian Type acts, with Q and Ha units; scores unchanged) +> **Last reviewed:** 2026-10-10 · **Last updated:** 2026-11-14 · **Change:** minor (Pencil ignores Smart Guides and Snap to Point and shows no Smart Guides, #7252; previously: Pencil continuation, straight-line and closing cursors; scores and estimates unchanged; previously: G5: Weather Icons joins built-in symbol libraries (Sun, Moon, Cloud, Rain, Thunder, Snow); scores and estimates unchanged; previously: a closed Pencil stroke closes with a straight segment; previously: Snap to Point with Smart Guides off draws no Smart Guides labels or lines, #7250; previously: 3D: the seams of Extrude & Bevel, Inflate and Rotate under a white light, and of the faces of Extrude & Bevel (Classic), Revolve (Classic) and Rotate (Classic), went from miter to round joins, so white-light 3D output is expected to differ from the 2026-10-17 comparison at facet corners (not measured: the scenes were not exported again); previously: `.ai` and EPS import: in layers that don't draw as the page, art that differs away from an envelope of type no longer costs it its editable type; it keeps its drawn art where, in the pixels it and its drawn art ink, the layers with it differ from the page more than its own check allows, or past the envelopes' share of the page check, #7141; Character panel: the Set Font Height Reference dropdown shows an icon before each reference, #6304; scores and estimates unchanged; previously: Envelopes: a top object's side whose pieces are all one curve split at anchors follows that curve's parameter, so a top object saved with its sides' curves in pieces draws as its `.ai` drawn art, #7097; scores and estimates unchanged; previously: Graphic Styles list fills a taller panel, #2992; scores and estimates unchanged; previously: PDF import: glyphs in a span with an empty ActualText come in as outlines, #6971; scores and estimates unchanged; previously: library panels' lists fill a taller panel, #2992; scores and estimates unchanged; previously: Swatches list fills a taller panel, #1638; scores and estimates unchanged; previously minor: Object › Rasterize with the Grayscale or Bitmap colour model makes a grayscale image, #6969; scores and estimates unchanged; previously minor: `.ai` and EPS import: type in an envelope with Distort Appearance is also tried mapped from the box of what it paints, miter tips and moved strokes included, after its glyphs grown by half its strokes' weight (#6824; #6617: Swatches panel menu: Show Recent Colors; scores unchanged; previously minor: icon-strip flyouts also resize from the top edge and the canvas-side top corner, keeping the moved top in workspaces (storytold/craft-libs#1094); scores and estimates unchanged; previously: #6865: explicitly requested oversized editing artboard; macOS: the canvas cursor stays after the pointer moves, #6362; scores and estimates unchanged; previously minor: Type tool: kerning at a caret at the start of a line moves the character after it, #5111; scores and estimates unchanged; previously minor: Rulers: the zero point dragged out of the rulers' corner snaps as a drawn point does; previously minor: Live Paint Bucket fills faces crossed in one drag (#6373); previously: #6404: transform-aware Eyedropper character copying; scores and estimates unchanged; previously: Envelopes: with Distort Appearance, type's strokes paint along the bent glyph outlines at their own weight, as users' `.ai` files draw them, which changes how VectorCraft's own envelopes of stroked type draw (#6644; scores and estimates unchanged); previously minor: G5: Energy Beams brush library; bundled content ~44% → ~46%; previously minor: G5: Skill Icons symbol library; bundled content ~42% → ~44%; previously minor: `.ai` and EPS import: an envelope saved in Edit Contents whose mesh lies away from its drawn art by a move opens live on that art (#6570; scores and estimates unchanged); previously minor: ruler double-click adds a guide at the pointer, #5239; G5: Status Effects graphic style library; bundled content ~40% → ~42%; MCP symbol libraries list UI Frames and Map Markers; previously minor: G5: Inventory Icons built-in symbol library; bundled content ~38% → ~40%; previously minor: `.ai` and EPS import: stroked type in an envelope maps from its glyphs grown by half its stroke (#3179; scores and estimates unchanged); previously minor: `.ai` and EPS import: warps of type open as mesh envelopes on their saved grid where VectorCraft's warp doesn't draw as their drawn art (#3179; scores and estimates unchanged); G5: Game Trails brush library; bundled content ~36% → ~38%; previously minor: Edit › Edit Custom Dictionary…: its dialog adds, deletes and changes the custom dictionary's words, #4936; previously minor: `.ai` and EPS import: envelopes of type open live where they draw as their drawn art and the layers with them draw as the page (#3179; scores and estimates unchanged); G5: Game HUD graphic style library; bundled content ~34% → ~36%; previously minor: Line Arrow arrowhead (#5421; scores and estimates unchanged); G5: Map Markers built-in symbol library; bundled content ~32% → ~34%; previously minor: right-click on type: Spelling › Auto Spell Check, with its check mark, #4936; previously minor: right-click on a word Auto Spell Check underlined: its suggestions, Ignore All and Add to Dictionary, #4936; previously minor: Canvas: a 3D effect changed on type or a group redraws where its solid was; Fit to Artwork Bounds and per-artboard SVG export build each solid once for all artboards; previously minor: Effect Gallery: a thumbnail for each filter and a preview area inside the dialog, on an original drawing; Raster effects 52% → 55%, hours 1–2 → none; headline numbers unchanged; Auto Spell Check: `edit.autoSpellCheck` underlines the unknown words, #4936; previously minor: PDF editable import preserves authored ActualText once, including empty/nested spans and authored ordering (#6165); cross-line/style layout remains approximate; scores and estimates unchanged; PDF marked-text export (#6309): compatible glyphs stay on one layout line with per-glyph offsets; scores and estimates unchanged; G5: UI Frames built-in symbol library with default 9-slice; bundled content ~32%; previously minor: G5: dynamic symbol part on-canvas opacity/blend/gradient/pattern; strokes remaining no longer lists Overlap/auto corners; symbols ~88%; previously minor: interim macOS cursor delivery, #2292; native validation pending; scores and estimates unchanged; previously minor: harakat paint fallback clarified; previously minor: current Guides feature-area rows consolidated using existing ruler evidence; scores and estimates unchanged; previously minor: Control bar › Snapping includes the existing Snap to Glyph and Alignment Guides toggles (#6164); scores and estimates unchanged; previously minor: G5 docs: Art brush Overlap and Pattern brush auto corners removed from strokes remaining; symbols remaining lists dynamic on-canvas beyond solid and guides outside the art; previously minor: custom dictionary and Ignore All: `text.spelling.addWord`, `removeWord`, `changeWord`, `dictionary` and `ignoreAll`, #4936; previously minor: EPS import: embedded fonts (composite, Type 42, CID-keyed, Type 1, CFF FontSet) draw their glyphs; spell check engine: `text.spelling.check` and `text.spelling.suggest` on craft-proof, #4936; previously minor: floating tab groups collapse into the side icon rail and opened rail panels fold back into it, #5925 in part; `.ai`/EPS type keeps its tab stops, and right-aligned lines with tabs lay out as the file's page, #6147; `.ai`/EPS type from the text document lays its lines out closer to the file's page, within limits, #6137; `.ai` and EPS import: older Art brush objects read; numeric fields step on wheel hover without taking keyboard focus, and a panel wheel turn cannot seed a canvas zoom glide, #5949; Character Styles panel: a double-click on a style's row opens its Character Style Options; the dialog keeps a fixed width and scrolls its sections, so its buttons stay on screen; Tools stays beside the canvas with left-side panels; new gradients follow document color mode; Selection QoL: marquee modes and visible feedback, #5313; SVG CSS classes survive export and repeated import in all four styling modes (#2480); current-main integration retains event attributes and scripts; #3380 deletion-only review follow-up: independent survivors keep gradient placement, owned subpaths avoid discarded copies, and contracts/status/evidence are clarified; endpoint highlighting remains open; scores and estimates unchanged; the canvas keeps selection outlines and anchors between frames; Indian-language hyphenation review and license allowlist, #4947; Stroke gradients: an arrowhead aligned to the tip is painted to the corners of its base, #5964; Drop Shadow and glow dialogs: spinner arrows, #5367, #5368; Stroke Weight Up and Down shortcuts, #5797; Hindi catalog and contributor loanword preferences; full wording review in progress; Properties in Edit Artboards: a Transform section with the reference point above the Artboards section, #5219; the Control bar's Stroke: and Opacity: links scrub their fields, #4088; an image zoomed in on is separated, colorized or proofed only where it shows (#4155); a document's first frame renders on the render worker, so opening a heavy file no longer freezes the window, #4155; Control bar Paragraph section with type selected, #5372; translating unchanged type reuses its glyph and character-stroke outlines; scores and estimates unchanged) · **Target:** Adobe Illustrator 2026 (30.x; public release notes through 30.7, August 2026; Units › East Asian Type acts, with Q and Ha units; scores unchanged) > > Oversized artboard import update (2026-11-12): Explicit editing-data import retains a single artboard beyond a capped 14,400 pt PDF page (#6865). > @@ -61,7 +61,7 @@ Artboard Options forwards the active Artboard tool's Scale Artwork with Artboard | 2026-11-14 | minor | G5: Weather Icons joins Basic Shapes, UI Frames, Map Markers, Inventory Icons and Skill Icons as a sixth built-in symbol library (Sun, Moon, Cloud, Rain, Thunder, Snow; original procedural vector symbols generated in code, no default 9-slice); area score and estimate unchanged. | | 2026-11-14 | minor | Pencil and Paintbrush: a closed stroke (Alt at the release, or ending within Close Paths When Ends Are Within of its start) is fitted as the open stroke would be and closed by a straight segment back to its start, instead of curving on past both ends (`pencil_alt_closes_a_stroke_straight_back_to_its_start` in `crates/engine/src/tests/draw2.rs`). Scores and estimates unchanged. | | 2026-11-13 | minor | Pencil cursors: the continuation cursor (a short rising line) shows over an open end of a selected path before any press, freehand too, and while a continuing stroke nears another selected path's open end it connects to; the straight-line cursor is a short level line; a continued path, a straight line too, shows the closing cursor and closes within Close Paths When Ends Are Within of its other end, and with Alt at the release (`a_continued_stroke_shows_where_it_connects_or_closes` in `crates/tools/src/draw2/gesture/tests.rs`, `pencil_extend_closes_as_closed_says` in `crates/engine/src/tests/draw2.rs`). Scores and estimates unchanged. | - +| 2026-11-13 | minor | Pencil: ignores Smart Guides and Snap to Point and shows no Smart Guides, hovering or drawing; a stroke's ends and both ends of its straight lines follow the hand, while Snap to Grid and Snap to Pixel still move them (#7252; `pencil_follows_the_hand_and_shows_no_smart_guides`, `pencil_ends_still_snap_to_the_grid_and_pixels` in `crates/tools/src/draw2/gesture/tests.rs`). Public basis: community experts on the reference app's forum say Smart Guides and the other snapping options don't make the Pencil snap ([Drawing and snapping to path in Illustrator](https://community.adobe.com/questions-652/drawing-and-snapping-to-path-in-illustrator-766887)). Scores and estimates unchanged. | | 2026-11-13 | minor | Snap to Point: with Smart Guides off it still pulls drawn and dragged points onto anchors and ruler guides, but draws none of the Smart Guides labels ("anchor") or lines (#7250; `guides::tests::snap_to_point_without_smart_guides_shows_no_guides`). Scores and estimates unchanged. | | 2026-11-13 | minor | Graphic Styles: in a panel made taller the list fills the space above the footer instead of stopping at 220 pt (#2992; `the_list_fills_a_tall_panel_above_its_footer` in `crates/ui-egui/src/panels/graphic_styles.rs`). Scores and estimates unchanged. | | 2026-11-13 | minor | PDF import: glyphs inside a marked-content span with an empty `ActualText` come in as outlines in their fill and stroke instead of being left out, adding no text (#6971; `empty_actual_text_keeps_the_glyphs_art` in `crates/pdf/src/tests/actual_text.rs`). Scores and estimates unchanged. | @@ -1113,7 +1113,7 @@ Moved from the ROADMAP's "Shipped so far" on 2026-10-10. Update it when a featur Curvature point markers are circular, with no direction handles. While drawing, its own point feedback replaces generic selection markers; existing paths use the selection overlay, including partial selections and Hide Edges. Anchor Size applies, and Direct Selection and Pen retain their handles. The real egui-frame regressions in `crates/ui-egui/src/canvas.rs` verify marker positions, counts and unchanged documents (#1236, in part); the existing-path interpolation request remains open. The curve through the points (`curvature_spline` in `crates/tools/src/draw2.rs`) makes each stretch of three points follow the circle through them: a smooth point's handles lie along that circle's tangent, each `chord / (3 cos²(α/2))` long (α between handle and chord, capped at 90°), and the ends of an open path mirror their neighbour's tangent in their chord, so a J or a U curves evenly, a turn tighter than 30° comes to a point, and uneven spacing doesn't loop; the rubber band, a dragged or inserted point and `path.convertAnchor` to smooth use the same rule, while the Pencil's fitting keeps its own; `tests/draw2.rs` checks that the rubber band is the path the click makes (#1236, in part). The Smooth tool smooths only the stretch of path under the drag (#1547, fixes #1512). A path the Smooth tool changes stays selected whole, and the anchor points and segments selected on it with Direct Selection are deselected. Selected paths the drag does not change keep their selected anchors, and undo restores the earlier selection (`tests/draw2.rs`, `smoothing_a_path_drops_its_direct_selected_anchors`). While the Smooth tool drags with a path selected that it can smooth, a dashed outline shows the band it smooths: everything within its radius of the drag (12 screen pixels, VectorCraft's own value), round at both ends; Alt smoothing with the Pencil, Paintbrush and Blob Brush shows the same band. While Alt is held during a Paintbrush stroke or before a press with no path selected that the Smooth tool can act on, the Paintbrush shows a closing cursor (a crosshair with a ring), and so does the Pencil with Alt key toggles to Smooth Tool off when Alt is pressed after the drag starts; releasing the mouse button with Alt still held closes the path. Before a Paintbrush press with such a path selected, Alt shows the Smooth cursor, and holding Alt at the press smooths that path with the Smooth tool's radius and Smooth Tool Options' Fidelity. A Pencil drag started with Shift or Alt held draws a straight line instead, which stays open. Smooth Tool Options' Fidelity is in pixels, as [the help page](https://help.adobe.com/archive/en_US/illustrator/cs3/illustrator_cs3_help.pdf#page=79) gives it: the Smooth tool, and an Alt smoothing drag with the Pencil, Paintbrush or Blob Brush, refits the path at Fidelity divided by the zoom, so a drag smooths a path as much on screen at 25 % as at 800 %. Reading the pixels as screen pixels is VectorCraft's own rule, as for the Pencil and the Paintbrush (#5729); the range (0.05 to 100 px) and the default (2.5 px) are VectorCraft's own values, and a saved Fidelity keeps its number (`crates/tools/src/draw2/gesture/tests.rs` test `smooth_fidelity_is_in_screen_pixels_at_any_zoom`, `crates/engine/src/tests/draw2.rs` test `smooth_region_refits_at_the_tolerance_sent_at_any_zoom`). - With Shift held at the press, the Pencil draws a straight line from the press point to the pointer at 45° steps from the Constrain Angle, as [Draw straight lines with the Pencil tool](https://helpx.adobe.com/illustrator/desktop/draw-shapes-and-paths/draw-shapes/draw-straight-lines-with-the-pencil-tool.html) describes; pressed on an end of a selected open path, the line continues the path from that end (part of #3799). With Option/Alt held at the press and Alt key toggles to Smooth Tool off, the Pencil draws a straight line at any angle, whose ends snap to Smart Guides, and it stays open when Alt is still held at the release; Shift and Alt together keep the 45° steps (#3799). While Shift or Alt is held before the press, the Pencil shows a straight-line cursor (a crosshair with a short level line), as the page describes. Over an end of a selected open path, where the stroke continues the path, freehand or as a straight line, it shows a path-continuation cursor (a crosshair with a short line rising to the right), as [Extend paths with the Pencil tool](https://helpx.adobe.com/illustrator/desktop/draw-shapes-and-paths/draw-shapes/extend-paths-with-the-pencil-tool.html) describes, and again while a continuing stroke ends near an open end of another selected path, where the release connects the two ([Connect two paths with the Pencil tool](https://helpx.adobe.com/illustrator/desktop/draw-shapes-and-paths/draw-shapes/connect-two-paths-with-the-pencil-tool.html)). A continuing stroke, a straight line too, that ends within Close Paths When Ends Are Within of the path's other end shows the closing cursor, and the release closes the path; Alt held at the release closes a continuing freehand stroke too (a straight line stays open, as above). + With Shift held at the press, the Pencil draws a straight line from the press point to the pointer at 45° steps from the Constrain Angle, as [Draw straight lines with the Pencil tool](https://helpx.adobe.com/illustrator/desktop/draw-shapes-and-paths/draw-shapes/draw-straight-lines-with-the-pencil-tool.html) describes; pressed on an end of a selected open path, the line continues the path from that end (part of #3799). With Option/Alt held at the press and Alt key toggles to Smooth Tool off, the Pencil draws a straight line at any angle, and it stays open when Alt is still held at the release; Shift and Alt together keep the 45° steps (#3799). While Shift or Alt is held before the press, the Pencil shows a straight-line cursor (a crosshair with a short level line), as the page describes. Over an end of a selected open path, where the stroke continues the path, freehand or as a straight line, it shows a path-continuation cursor (a crosshair with a short line rising to the right), as [Extend paths with the Pencil tool](https://helpx.adobe.com/illustrator/desktop/draw-shapes-and-paths/draw-shapes/extend-paths-with-the-pencil-tool.html) describes, and again while a continuing stroke ends near an open end of another selected path, where the release connects the two ([Connect two paths with the Pencil tool](https://helpx.adobe.com/illustrator/desktop/draw-shapes-and-paths/draw-shapes/connect-two-paths-with-the-pencil-tool.html)). A continuing stroke, a straight line too, that ends within Close Paths When Ends Are Within of the path's other end shows the closing cursor, and the release closes the path; Alt held at the release closes a continuing freehand stroke too (a straight line stays open, as above). - **Shapes:** all shape tools (including Flare) and the line, arc, spiral and grid tools. Space held while dragging out a shape, line, arc, spiral or grid moves it at its current size. While a grid is dragged out, Up/Down change its rows (concentric dividers) and Left/Right its columns (radial dividers). A click with a grid tool asks for the size, the divider counts and the grid options (#1377, in part): a skew for each set of dividers, Use Outside Rectangle As Frame or Create Compound Path From Ellipses, and Fill Grid; they are parameters of `shape.rectangularGrid` and `shape.polarGrid`, stay as the tool's options and apply to drags too. A shape just drawn stays adjustable with its tool: its Live Shape widgets drag, a press on its centre point (Show Center) moves the selection with the Selection tool's move arrow, snapping and Alt copy, and a press in the rotate zone just outside a bounding-box corner turns it about the centre with the Selection tool's rotate cursor (#5477; tests `a_shape_tool_moves_the_selection_by_its_centre_point_and_turns_it_from_a_corner` and, through the engine, `shapetools.rs`). A drag on one of its eight bounding-box handles scales it as the Selection tool's handles do, with their cursors and snapping, instead of drawing a new shape from the handle. A shape tool takes a press as a handle's only on the drawn handle square (VectorCraft's own rule: 3 screen points from its centre along each axis at the default Anchor Size, a half point more or less per step; the Selection tool takes 5), so a press just beside a handle still draws (tests `a_shape_tool_scales_the_selection_by_its_bounding_box_handles`, `a_shape_tool_draws_from_a_press_just_beside_a_handle` and `a_shape_tool_scales_the_shape_just_drawn_by_its_bounding_box_handle`). The curve a skew percentage follows and the direction of the radial skew are our own (the public documentation gives neither), and the dialogs have no reference point locator. An ellipse's Pie Start and End Angle and Invert Pie (Transform and Properties panels' Ellipse Properties, `object.setLiveShape {pieStart, pieEnd, invertPie}`) cut it as a pie (#812). With the bounding box showing, the Selection tool shows a selected ellipse's two pie widgets just outside it; dragging one sets its angle in one undo step and double-clicking one makes the ellipse whole again. A live polygon's Polygon Properties there: side count, angle, corner type and radius, radius, side length and Make Sides Equal once an uneven scale has made its sides differ (`object.setLiveShape {sides, polygonAngle, polygonRadius, sideLength, makeSidesEqual}`, part of #812); a star is a plain path, as in Illustrator. The Flare Tool Options last as the tool's options: the next flare dragged out uses them, a click's dialog shows them and double-clicking the tool opens them (part of #812). - **Shapes:** all shape tools (including Flare) and the line, arc, spiral and grid tools. Space held while dragging out a shape, line, arc, spiral or grid moves it at its current size. The Flare tool's center drag turns the rays by 0.1 radian at each drag update in which the pointer's document y grows, and back by as much at each one in which it falls, Shift held keeps their turn, and Space held during either of its drags moves the flare. While a grid is dragged out, Up/Down change its rows (concentric dividers) and Left/Right its columns (radial dividers). A click with a grid tool asks for the size, the divider counts and the grid options (#1377, in part): a skew for each set of dividers, Use Outside Rectangle As Frame or Create Compound Path From Ellipses, and Fill Grid; they are parameters of `shape.rectangularGrid` and `shape.polarGrid`, stay as the tool's options and apply to drags too. The curve a skew percentage follows and the direction of the radial skew are our own (the public documentation gives neither), and the dialogs have no reference point locator. An ellipse's Pie Start and End Angle and Invert Pie (Transform and Properties panels' Ellipse Properties, `object.setLiveShape {pieStart, pieEnd, invertPie}`) cut it as a pie (#812). With the bounding box showing, the Selection tool shows a selected ellipse's two pie widgets just outside it; dragging one sets its angle in one undo step and double-clicking one makes the ellipse whole again. A live polygon's Polygon Properties there: side count, angle, corner type and radius, radius, side length and Make Sides Equal once an uneven scale has made its sides differ (`object.setLiveShape {sides, polygonAngle, polygonRadius, sideLength, makeSidesEqual}`, part of #812); a star is a plain path, as in Illustrator. The Flare Tool Options last as the tool's options: the next flare dragged out uses them, a click's dialog shows them and double-clicking the tool opens them (part of #812). - **Shapes:** all shape tools (including Flare) and the line, arc, spiral and grid tools. Space held while dragging out a shape, line, arc, spiral or grid moves it at its current size. The Flare tool's center drag turns the rays with the pointer, Shift keeps them in their original orientation (unturned, or turned by a nonzero General › Constrain Angle), and Space held during either of its drags moves the flare. While a grid is dragged out, Up/Down change its rows (concentric dividers) and Left/Right its columns (radial dividers). A click with a grid tool asks for the size, the divider counts and the grid options (#1377, in part): a skew for each set of dividers, Use Outside Rectangle As Frame or Create Compound Path From Ellipses, and Fill Grid; they are parameters of `shape.rectangularGrid` and `shape.polarGrid`, stay as the tool's options and apply to drags too. The curve a skew percentage follows and the direction of the radial skew are our own (the public documentation gives neither), and the dialogs have no reference point locator. An ellipse's Pie Start and End Angle and Invert Pie (Transform and Properties panels' Ellipse Properties, `object.setLiveShape {pieStart, pieEnd, invertPie}`) cut it as a pie (#812). With the bounding box showing, the Selection tool shows a selected ellipse's two pie widgets just outside it; dragging one sets its angle in one undo step and double-clicking one makes the ellipse whole again. A live polygon's Polygon Properties there: side count, angle, corner type and radius, radius, side length and Make Sides Equal once an uneven scale has made its sides differ (`object.setLiveShape {sides, polygonAngle, polygonRadius, sideLength, makeSidesEqual}`, part of #812); a star is a plain path, as in Illustrator. The Flare Tool Options last as the tool's options: the next flare dragged out uses them, a click's dialog shows them and double-clicking the tool opens them (part of #812).