An image in a DeviceN color space opened as an RGB image, losing its inks.
One of one colorant now opens as a Separation image does since #6347: a
grayscale image of its tints colorized by its ink. One of two to 32
colorants that are all process plates (the ink None may be among them)
opens as a CMYK image, each colorant's tint in its plate, its Decode array
applied (8 or 16 bits a sample). A DeviceN image that mixes a spot ink
with other colorants, such as a duotone, still opens as RGB.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A closed font family field stayed ready for the wheel as long as it kept
its place and drew in each pass. Coverage was checked only when a pointer
move or wheel turn arrived. When a window, modal or popup covered a still
pointer and went away with no input in between, the next plain wheel
turn changed the selected type's font.
The field now stops being ready, and a wheel stream it held ends, in any
pass where the last pointer position is over the field but on another
layer. The pointer has to move onto the field again before the wheel
steps the font.
The Parameter schemas section of docs/mcp.md now names every keyword
ParamSchema::to_json writes: $schema, description and deprecated at the
root, items for lists, prefixItems, items: false and minItems for a
point, anyOf and minItems for a color, and description, default and
deprecated on a parameter.
Mesh export decided whether an edge walls a hole at the edge's middle alone, so an edge that crosses another closed contour turned its whole length toward the hole, or none of it. Each sampled piece of a closed contour is now cut where it crosses another closed contour, and each part faces a hole only where it walls one.
With Use Preview Bounds on, the visual box of a butt-capped stroke on an
open path grew by half the stroke weight past each end of the path, where
a butt cap paints nothing. A 2 pt vertical line set to H: 10 mm in the
Transform panel drew about 9.3 mm long.
The box of an open subpath with butt caps no longer reaches past its
ends. A straight segment's box comes from the four corners of its stroked
rectangle, and a curve's box comes from the stroke at its ends and where
its tangent is square to an axis. Bevel joins, and miter joins the limit
bevels, are measured by the stroked corners, and round joins by the arc
they paint outside the turn, instead of half the weight all round. Round
and projecting caps, arrowheads, closed paths and miter tips measure as
before. Two cases can still measure larger than the stroke paints: a
curve that bends more tightly than half the weight, and a butt-dashed
path whose first or last dash is a gap, which is measured to the path's
ends.
A horizontal or vertical butt line now measures one stroke weight less
along its length in W or H, and Align places it by its end points. A
slanted line's box shrinks by less: the stroke's corners still reach
past the end points across the line. object.setBounds measures as drawn,
after each scale it tries, a butt-capped open path with a segment at a
slant, symbol instances' art included.
Mesh export tested the middle of every segment against every closed contour's bounds, so a profile of thousands of separate contours took hundreds of millions of comparisons before the work limit counted any. The closed contours now go in a grid over their bounds, a point is tested only against the contours of its cell, and placing a contour in a cell and each candidate looked at count toward the limit.
An image whose color space XC sets to one ink (n [c m y k /DeviceCMYK
(name) /Separation] XC) opened as a gray RGB image: its samples, the ink's
tints (255 at 100 %), were read as gray levels, so the tints drew inverted
and the ink was lost.
It now opens as a grayscale image of the tints, black at 100 %, colorized
by the ink at 100 %: its spot swatch, a process plate's CMYK color, or
Registration. Its alpha channel becomes its opacity mask, a reduced large
image's too (a colorized image reduced to fit the limits no longer keeps
its alpha in its pixels). 8-bit and 1-bit samples, binary or in hex
comment lines. A device space and the ink None change nothing.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Revolve, Extrude & Bevel, Inflate and Rotate on a group or layer draw only as the group's own effect. On the group's fill or stroke they drew nothing, yet effect.apply and effect.setParams accepted them. Both now refuse that placement.
Since #5331, a closed font family field in Character, Properties or the
Control bar took every plain vertical wheel turn while the pointer was
over it. When a panel scrolled the field under a still pointer, the
field took the rest of the turns: the panel stopped scrolling and each
turn changed the selected type's font.
The field now takes the wheel only when the pointer was moved onto it
after the field last moved, and the wheel stream began there. A stream
that began anywhere else, a sideways scroll included, stays there until
0.5 s pass with no wheel input. A stream that leaves its field does not
return to it. It leaves when the pointer moves off the field or out of
the window, when the field moves or misses a layout pass, and when a
turn arrives while an overlay covers the field. Trackpad momentum stays
with the stream it follows and never starts one on a field. The rule and
its 0.5 s are VectorCraft's own.
Wheel turns the field does not take stay in the input in their order.
Moving the pointer onto the field and turning the wheel still steps the
font, as #5253 asks, in floating panel windows too. When the pointer was
moved onto the field while a window or overlay covered it, the pointer
has to move again after the cover goes away before the wheel steps the
font.
Each fill or stroke with its own Revolve counted the copies of its paint from zero, so an object with several of them could draw past the 256 MiB budget. They now share one count, and past it the source path draws, as for the members of a group.
effect.apply and effect.setParams on a fill or stroke now check the Revolve in that item's paint, after the item's geometry effects before it, together with the object's other items that carry a Revolve. Before, they checked the object's top fill.
docs/revolve.md marks the axis position, type handling and member paint as VectorCraft's own rules, and docs/mcp.md says how the budget is counted.
With anchors picked with Direct Selection, Edit > Cut removed only the
segments between them, so the picked anchors stayed in the path. Cut now
removes picked anchors and the segments attached to them from a path or
a compound path's member, as Clear does. Picked segments still lose only
those segments. When a path has picked segments, Copy and Cut leave out
anchors picked on its other contours, as Clear does.
Docs: docs/target-app-parity.md.
Preferences > Guides & Grid gets a Lock Guides by Default checkbox
(lockGuidesByDefault), off by default. With it on, the app starts with
View > Guides > Lock Guides on. Changing the checkbox sets the lock at
once; an OK that leaves it unchanged keeps the session's lock, and
View > Guides > Lock Guides still toggles the lock for the session
without changing the preference. Reset Preferences turns it off and
unlocks guides when it was on. Headless sessions start unlocked unless
prefs.set turns it on, and older preference files read it as off.
Lock Guides works as before: new guides can still be dragged out of a
ruler or added with guide.add while guides are locked. The lock code
moves from view.guides.lock into Session::set_guides_locked so the
preference and the menu share it.
Docs: docs/mcp.md, docs/target-app-parity.md.
A clipping group, a group with a fill or stroke of its own and a group
whose type is kept as type still copy each member in place, and a
group's copies leave out its guides.
The Measure and Measure & Inspect tools ignored View › Snap to Glyph:
their press and end points snapped only to targets that hold no glyph
guides.
With Snap to Glyph, Smart Guides and Alignment Guides on, and Snap to
Grid and Snap to Pixel off, a drag's press and end land within the
snapping tolerance on the guides of live type that the Character
panel's options allow, except Anchor Point. A Shift-drag's end slides
along its 45° step to them, and the guide shows during the drag. With
Snap to Glyph off, the tools snap to the same targets as before and
show no guide. The targets are kept while the document, the window and
the snapping options stay the same, so a drag lays out the type once.
A group with a visible member that carries a geometry, Pathfinder or 3D effect, also in an opacity mask, keeps its previous copies. Copies stop at the budget with what each copy's own effects make, and a group's copies count the art of opacity masks.
The PDF and SVG tests for a group's image copies now expect the original on top.
The second sweep of `unite_all` joins contours that lie within the sweep
tolerance of each other, and the first sweep can leave such contours
apart. `solid::tests::meets_within_twice_the_boolean_tolerance` needs
that join. A single input now skips the second sweep only when no two
of its segments lie within twice the tolerance. The check compares at
most 512 pairs per segment and runs the second sweep past that.
`unite_parts` tests the single-input case before it builds the combined
path, and it takes `parts` and `inputs` by value so that both are freed
before the second sweep.
Edit Colors > Convert to Grayscale wrote the new image as an RGBA PNG, so
a PDF wrote it as DeviceRGB, in a CMYK document too. The image is now
stored as a gray PNG, with alpha only when some pixel is not opaque. Adjust
Colors with mode gray and convert does the same.
An RGB image whose pixels are already neutral now converts, and an image
already stored as gray with no visible change is left as it is.
Type sweeps as its glyph outlines and stays editable. On a group or layer every visible member sweeps about one axis on the edge of the members' bounds together, each in its own paint.
A surface now takes up to 16,384 profile points and 163,840 faces. Curves take fewer samples, down to 4, when a surface passes those limits, and the command reports the failure below that, after the geometry effects before the Revolve and with the cumulative size of its paint copies counted. Mesh export turns the walls of holes toward them. Expand Appearance works on type with Extrude as well as Revolve.
Fixes#3617
A new test changes the document in place (Arc::make_mut, with no other
holder and no change of revision) and checks the answer is measured
again: keyed on the document's address alone, it would keep the old
answer. The kept answer's doc says what it holds after the measure,
and that the fonts set the bounds of all type. Should measuring ever
ask again while it runs, it is measured without being kept, rather
than borrowed twice.
The stack overflow fixed in d5d04f868 also hit EPS export, and the
parity rows now say so. Two test docs are corrected: the fill-only
clipping is an older bug on main, and the outline-view difference runs
both ways on a few dozen hairline pixels.
The engine reads null params as {}, but engine.commands listed every
schema with the root type "object", so a client that validated a call
against the schema refused one the engine accepts. A schema with no
required parameter now has the root type ["object", "null"]. A schema
with a required parameter keeps "object", because the engine refuses
null params for it as a missing parameter. Nested objects are unchanged.
A Transform effect with copies on a group copied each member on its own,
so one member's copies lay over the fills of the next member. Each copy
is now a whole group, the original on top and each copy below the one
before. A path's copies follow the same order. Guides are not copied,
and the copies stop at the node limit. A group with its own fill or
stroke, a clipping group and live type keep their previous copies.
Check a new call's params against the schema in execute_spec, after the
key check and before the parser, and check every command.batch step
before the first one runs. menucmds::run_raw and the two other direct
runs go through the same check. Saved steps keep keys the schema does
not name and have the values it names checked.
Limit nesting to 16 levels, cut error text and paths to a fixed length,
and copy nothing before it has passed. Treat a whole number written
with a fraction as an integer. Check declared defaults and duplicate
names once at first use.
Give the five schema errors rows in the 22 complete-message catalogs.
- The parity rows say what the fix covers: a 3D effect on a fill or
stroke that builds nothing overflowed the stack with no effect of the
object's own too, on the canvas, in Object › Rasterize and in raster
exports.
- The builds-nothing test says the fill-only difference (a raster
effect clipped to the path, cutting Roughen's spikes, when drawn
without the 3D effect) is an older bug, not the design.
- The traced-shape test says why its area is bounded rather than drawn
again: a partial render in outline view differs from the whole by one
in alpha on 37 pixels, older than the test and unrelated to the edit.
- A doc comment rewrapped.
BFlat