Space held while dragging out a new anchor already moved it, handles and
all, but the closing drag skipped it, so the closing anchor could not be
repositioned. The closing drag now moves the first anchor by as far as the
pointer moves while Space is held, its handles with it, and the drag
shapes the handles round the new place once Space is released.
path.close takes `at: [x, y]`, which moves the first anchor, its handles
with it, before `in` and `out` are placed. docs/mcp.md and the Pen line
in docs/target-app-parity.md describe it.
Closing a path by dragging on its first anchor made that anchor smooth
with symmetric handles, so the first segment bent along with the closing
one. The drag now sets the first anchor's incoming handle to the mirror
of the pointer. Its outgoing handle stays where it is on a corner, so
the first segment keeps its shape, and on a smooth anchor it turns to
stay in line at its own length. Alt makes the anchor a corner and leaves
the outgoing handle where it was when Alt went down. A click on the
first anchor closes the path with the incoming handle retracted and the
anchor a corner, so the closing segment comes in straight.
The Smart Pen's closing drag follows the same rule.
path.close's `in` now places the handle as path.setHandle does, and a
new `out` param places the outgoing handle and makes the anchor a
corner.
path.insertAnchor (the Add Anchor Point tool, the Pen's Auto Add, the
Smart Pen's Alt-click on a segment and Alt-click with the Scissors)
added the anchor without changing the selection, so the direct-selected
anchors and selected segments after it on the subpath kept their old
numbers and the selection shifted onto the next points along. It now
renumbers them with renumber_after_insert, the helper path.reshape
uses. A selected segment that the new anchor splits stays selected as
its two halves, and the new anchor is direct-selected with them. Undo
restores the path and the selection in one step.
Docs: params text, docs/mcp.md, docs/target-app-parity.md.
After a Scissors cut (`path.split`) the whole path stayed selected: both
pieces of an open path, or the opened path of a closed one. A Direct
Selection drag from the cut then moved every anchor, so an ellipse cut
at an anchor could not be pulled open by dragging its end.
- `path.split` selects the first anchor of the piece after the cut and
nothing else, as `path.cutAtAnchors` does: anchor 0 of an opened
closed subpath, of the new path when an open path becomes two, or of
the subpath added to a path of several subpaths.
- A Direct Selection press on anchors of a selected path that lie on top
of each other takes the selected one. It took the first in path order,
which in a path of several subpaths was the unselected end.
Docs: docs/mcp.md, docs/target-app-parity.md, the `path.split` params
text.
With anchors picked with Direct Selection, Edit > Cut removed only the
segments between them, so the picked anchors stayed in the path. Cut now
removes picked anchors and the segments attached to them from a path or
a compound path's member, as Clear does. Picked segments still lose only
those segments. When a path has picked segments, Copy and Cut leave out
anchors picked on its other contours, as Clear does.
Docs: docs/target-app-parity.md.
With the Rectangle and Ellipse tools, Cmd lends the selection tool chosen
last, and Copy already took the anchors Direct Selection picked. The
Curvature tool, which Cmd lends Direct Selection, copied the whole path
before this PR, as the Pen did.
The remembered selection is now tied to the document it was made in, by its
uid, instead of being cleared on every tool reset: another view of the same
document, or closing an inactive tab, kept the anchors picked but made Copy
take the whole path.
A lent gesture that leaves the selection as it found it (a Cmd+Shift marquee
over nothing) is no longer recorded as a pick, so the Pen's last anchor stays
its own and Copy takes the whole path.
Also records #6123 in target-app-parity.md.
With the Pen or Curvature tool, Copy and Cut ignore the anchor selection,
so that the last anchor the Pen leaves selected doesn't make Copy take just
that anchor (#2122). Anchors picked with the Direct Selection that Cmd/Ctrl
lends those tools were ignored too, and the whole path was copied.
The session now remembers the selection the lent tool leaves when it gives
the tool back. While that is still the selection, Copy and Cut take the
picked anchors and segments, as with Direct Selection chosen.
The Join tool drew a segment between the open ends of two crossing paths
instead of trimming what overhangs the crossing. path.joinScrub now looks for
two crossing open subpaths whose overhanging ends the scrub runs over, cuts
both at the crossing and joins the kept parts there with a corner, in one undo
step. Without a crossing the endpoint join is unchanged.
Drawing a new Pencil or Paintbrush stroke kept the earlier selection: the engine's
`insert_look` selects the new path only when `keepSelected` is on, and with it off left the
selection as it was. Illustrator starts such a stroke by dropping the selection, and the new
stroke is not selected with Keep selected off, so the command now clears the selection after
inserting a new path.
What stays as before: with Keep selected on a stroke selects only the path it draws (the
earlier selection is replaced); a stroke that continues or redraws a selected path with Keep
selected off deselects that path and keeps the rest of the selection. The Blob Brush keeps its
own Keep selected and Merge only with selection options.
`path.freehand`'s documentation, the engine test
`pencil_with_keep_selected_off_leaves_nothing_selected` and the Tool Options test
`the_new_path_is_selected_only_with_keep_selected_on` cover the three cases. Docs: roadmap,
target-app-parity and ui-parity carry the change.
Cmd/Ctrl held with the Pen lends the last-used selection tool (Direct
Selection until one is chosen), which already moved anchors, straight
segments and curves of the path being drawn, one undo step each, and
handed the path back to the Pen.
With the Selection tool used last, the lent tool hit-tested the
bounding box even though the canvas hides it while anchors are selected
on their own, as the end anchor of a path being drawn is. Over the
path it showed a resize pointer, and the drag scaled the path by a
handle nobody could see: a flat path did nothing at all.
The Selection tool's handles now take the pointer only while the box is
shown (View > Show Bounding Box, no anchors selected on their own), so
the lent Selection tool moves the path being drawn.
Tests: select::tests::hidden_box_handles_take_no_press_while_anchors_are_selected,
tests::draw2::pen_cmd_drag_edits_anchors_and_segments_and_goes_on_drawing.
Blob Brush Tool Options gain Angle (-180 to 180 degrees, 0 by default)
and Roundness (0 to 100 percent, 100 by default), with a preview of the
tip and three dabs; a drag in the preview square sets the Angle. The
elliptical tip keeps its angle on the page along a stroke, a 0 percent
tip is drawn 0.1 percent as wide as it is long, and Size set to
Pressure still varies its size. path.blob takes angle and roundness,
and both values are kept with the tool's options.
While a non-round tip drags, the Blob Brush shows the outline of the
area it covers with its length label, and an Alt drag that smooths
shows the Smooth tool's thin line.
A straight Knife cut now starts only when Alt is held at the press.
Alt pressed later in the drag, even before the pointer moves, leaves
the cut freehand. Releasing Alt during a straight cut keeps it
straight.
With Shift+Alt, the cut keeps to 45° steps from the horizontal and
vertical whatever the Constrain Angle. The Pencil's straight line
still steps from the Constrain Angle.
Tests cover Alt after the press, Alt only at the release, a 90° cut,
a 30° Constrain Angle, and the cut boundaries in the engine.
Docs: docs/target-app-parity.md.
The Knife cut along the freehand drag whatever keys were held. The
reference app cuts in a straight line with Alt-drag, and it cuts at 45
or 90 degrees with Shift+Alt-drag.
With Alt held at the press, or pressed before the drag has moved, the
Knife's stroke is the press point and the pointer: the dashed line
shows it while dragging, and the release sends path.knife with those
two points. With Shift held too, the line keeps to 45° steps from the
Constrain Angle, as the Pencil's Shift line does. Shift is read on each
drag event and at the release. The cut stays straight when Alt is let
go, a line taken back to its press point sends no command, and Shift
alone leaves the cut freehand.
Docs: docs/target-app-parity.md.
Alt in a spiral drag now rounds the fitted segment count to whole winds
of four segments, counted from the segment count when Alt went down.
Ctrl/Cmd takes precedence when both keys are held, and switching back to
Alt starts from the current count with the held inner end kept. Arrow
keys, Escape, release and a new drag clear the held Alt count.
Tests cover both keys together, a switch mid-drag, Escape, the 2 to 1000
bounds and the committed path's anchor count. docs/mcp.md and
docs/target-app-parity.md describe the rule.
The reference app adds or subtracts winds from a spiral with Alt-drag
and changes its decay rate with Ctrl/Cmd-drag. VectorCraft's Spiral
tool did nothing with either key during a drag.
While a spiral is dragged out, Alt or Ctrl/Cmd keeps the spiral's
inner end at the distance from the center it had when the key went
down, and the outer end follows the pointer. With Alt the number of
segments changes to the nearest whole number that fits, within 2 to
1000, so dragging outward adds segments and dragging inward removes
them. With Ctrl/Cmd the decay changes to fit, within 5 to 99.99
percent, the decays a spiral is drawn with. When both keys are held,
Ctrl/Cmd changes the decay. Up/Down with a key still held move the
held radius to the new segment count. The new values stay when the
key is let go, and as the Spiral tool's segments and decay options
for the next spiral. Both keys also work with a 5 percent decay and
hundreds of segments.
Docs: docs/mcp.md, docs/target-app-parity.md.
Eraser Tool Options' Size takes Fixed or Pressure and a Variation as the
Blob Brush's does: the tool records the pen, and path.eraseRegion outlines
the squashed drag at the pen's widths, stretched back to the tip's angle
and roundness. The pressure parsing and outline move to draw2's common
helpers, shared by both commands.
Blob Brush Tool Options' Size takes Fixed or Pressure and a Variation, as
the brush options' Size does: with Pressure the brush is Size − Variation
wide where the pen presses lightest and Size + Variation where it presses
hardest. The tool records the pen pressure of each point and shows each
step of the drag as wide as the pen pressed there; path.blob takes
[x, y, pressure] points with sizeMode and sizeVariation and outlines the
stroke with that width profile. A stroke without pressure keeps the Size,
and Fixed with no variation stays the default.
https://helpx.adobe.com/illustrator/desktop/paint-and-fill/learn-painting-basics/blob-brush-options-and-best-practices.html
A closed arc from Arc Segment Tool Options, an Arc tool drag or
shape.arc with lengthX and lengthY closed through the box's bottom-left
corner with Base Along X, which makes a convex arc a quarter-ellipse
sector. With Base Along Y it closed through the corner a convex arc
bulges toward, so it drew the thin sliver between the arc and that
corner instead.
Such a closed arc now closes through the corner across from the one a
convex arc bulges toward with either base, so the Y-axis arc, open or
closed, convex or concave, is the X-axis arc mirrored top to bottom.
Open arcs and arcs with Base Along X are unchanged. The two-point
shape.arc form, whose params list no baseAlong, now closes through
(x1, y2) whatever baseAlong says.
Docs: docs/target-app-parity.md.
The merge test covered adjacent matches and a path of another color
between two matches. It now also covers a matching path the stroke
does not touch, between two it touches: both touched paths merge into
the upper one and the untouched path is left as it was.
A Blob Brush stroke used to merge with every closed path of its fill
color and no stroke that it touched, anywhere in the document, across
layers and groups and past objects of other kinds. It now merges with
the topmost such path it touches, and with the other touched matching
paths in the same group or layer that are next to that path in
stacking order, with no other kind of object between them. Merge only
with selection still limits the candidates to selected paths. The
merged path keeps the topmost path's id and place.
A click with the Scissors tool cut the path whether or not Alt was
held, and the cursor stayed the Scissors cursor. The reference app's
shortcut list has "Switch Scissors tool to Add Anchor Point tool" on
Alt (Option).
While Alt is held, a click with the Scissors tool now does what a click
with the Add Anchor Point tool does: on a segment it adds an anchor
point with path.insertAnchor in one undo step, and the path is not cut.
The cursor is the Add Anchor Point tool's while Alt is held. When Alt
is let go, the cursor is the Scissors again and a click cuts.
Docs: docs/target-app-parity.md, crates/tools/src/cursors.toml.
Deleting a point of a finished path with the Curvature tool sent
path.removeAnchor, which refits the two segments that met at the point so
one curve follows them. The path kept the bend of the deleted point
instead of curving through the points that remain.
The tool now sends path.removeAnchor with curvature: true, which uses the
new curvature_remove. Each smooth neighbor takes new handles from its new
neighbors, and an end beside one of them takes its end handle again. A
corner neighbor keeps its handle directions, and its handle on the new
segment scales with the segment's chord. With two points left, the points
that curve lose their handles. Object > Path > Remove Anchor Points and
the Delete Anchor Point tool still refit the curve.
An anchor added to a path that wasn't selected now selects that path,
the new anchor direct-selected, so the point shows and can be edited at
once instead of only after a Direct Selection click. Undo restores the
old selection; a path already selected (the Pen's Auto Add) keeps it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Found while testing crates/engine/src/cmd/create.rs:584 (dividers)
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Found while testing crates/engine/src/cmd/create.rs:344 (polygon) and :358 (star; shape.spiral `segments` at :507 reads the same way)
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
dotCooCoo