Commit Graph
7870 Commits
Author SHA1 Message Date
dotCooCoo 963dd42d1a Pen: choosing the Pen again while a path is being drawn ends that path, as Escape does
P, a click on the active Pen's button and `tool.select {tool: "pen"}`
now end the path being drawn through the same cleanup as Escape: the
path stays open and selected (a path inside a compound path leaves the
compound path selected), the Pen stays chosen, no undo step is added,
and the next click starts a new path. An anchor or handle being dragged
is committed first. With no path being drawn nothing changes.

Before this change the Pen kept drawing the same open path when it was
chosen again; the Blend test that stated that rule now checks the new
behavior.
2026-11-16 14:13:32 -08:00
dotCooCoo 15949e098a Color Guide: a spot color base gives tints of that spot color
When the Color Guide's base is a spot color, or a tint of one, picked in
the Swatches panel, with the Color panel's tint slider or with the base
chip, the cells right of the center in the base row of Tints/Shades are
now tints of that spot color. A click paints the art with the tint, a
drag carries it, and Save Colors as Swatches and Save Color Group to
Swatches make tint swatches linked to the spot color, so they follow an
edit of it. Shades, other rows, Warm/Cool, Vivid/Muted and a Limit to
Library give process colors, as before.

A cell's tint is the base's tint reduced by the share the cell goes
toward white. The guide follows a rename of the spot color swatch.

`swatch.new {colors}` and `swatch.newGroup {colors}` take
`{swatch, tint}` entries: a tint below 100% of a global or spot color
becomes a tint swatch ("Name 40%") linked to it.
2026-11-16 14:12:28 -08:00
dotCooCoo 3f0253977b Swatches: swatches dragged onto the Delete Swatch button are deleted
A swatch or color group dragged from the Swatches panel, in any view,
and released on the Delete Swatch button is deleted through
swatch.delete, even while nothing is selected and the button is
disabled for clicks. A swatch that is part of the selection carries the
other selected swatches of its kind with it. The drop asks first as a
plain click does, and Alt does not skip the question; Cancel keeps
everything, and OK deletes them in one undo step. None and Registration
are never taken. The button is enabled while swatches are selected or
while a swatch or group of the active document is being dragged, and it
is outlined only while such a swatch or group is held over it. A paint
from another panel, art, and a swatch dragged from another document
delete nothing.

The list's drop zone now ends where the list does. It used the list's
height before the list shrank to its rows, so with few rows it reached
over the buttons below and took a release on them: a paint dropped on
Delete Swatch became a new swatch.
2026-11-16 14:12:26 -08:00
dotCooCoo 3addb0940f Shapes: dragging a live polygon's side widget changes its number of sides
A selected live polygon shows a small diamond beside the middle of the
right side of its bounding box, with the Selection tool and with the
Rectangle, Rounded Rectangle, Ellipse, Polygon and Star tools, while the
bounding box and edges are shown. Dragging it sets the side count from 3
to 11: down adds a side and up removes one for every 12 screen pixels
along the box's own vertical axis, and the pointer shows the count while
measurement labels are on. A polygon of more than 11 sides keeps its
count until the drag goes up, which gives it 11. The drag sends
object.setLiveShape {sides} in one undo step, none when the count ends
where it began, and Escape puts the count back. Typed counts keep their
3 to 1000 range. The widget is drawn only while the box is drawn, so it
hides during a move, a turn and its own drag.

The help page describes the widget and its 3 to 11 range:
https://helpx.adobe.com/illustrator/desktop/draw-shapes-and-paths/modify-live-shapes/add-or-remove-sides-from-polygons.html
The widget's look and place, the drag direction, the step and the rule
for more than 11 sides are VectorCraft's own.

Docs: docs/target-app-parity.md and docs/ui-parity.md.
2026-11-16 14:06:47 -08:00
dotCooCoo 00f42826ef Effects: each copy of a Transform effect listed after Rasterize carries the Rasterize image
On a path or compound path, a Transform effect with copies listed after
the object's own Rasterize effect now places the one image Rasterize
makes of the art before it on the original and on each copy: copy k
through the effect's map applied k times, with its pixel grid and its
room around the art, the last copy lowest and the original on top.
Before, the Transform effect copied the art and Rasterize made one image
of all the copies on a grid square to the page.

The image is made once for every placement, also when a shadow or glow
is listed between the Rasterize and Transform effects. The canvas, the
object's bounds, Expand Appearance and PDF export use the same
placements; Expand Appearance and PDF export make a group of images that
share the one image's pixels. Copies stop where the copied art stops,
and a copy scaled to nothing is left out.
2026-11-16 13:55:27 -08:00
dotCooCoo e00cd6a6e3 Preferences: Guides & Grid settings show a sentence on hover and focus
The line under the Preferences fields now describes each of the 12 Guides
& Grid settings, from Snap to Grid to Pattern Editing's Tile Edge Color,
when the pointer is over the row or its control has the keyboard focus,
and a screen reader gets the same sentence. Each sentence states what
VectorCraft does with the setting. Rows are added to every complete
catalog.

Tests: the one-sentence-per-setting test now covers Guides & Grid, and
two new tests check the sentence on hover and on keyboard focus.
2026-11-16 13:54:38 -08:00
datatimp d9cbaeeb23 Docs: #8217 revision history row in target-app-parity 2026-11-16 16:49:26 -05:00
dotCooCoo de367486c0 .ai save: the editing copy keeps gradient meshes
The editing copy of a PDF-compatible .ai wrote every gradient mesh as
its drawn look. Meshes the .ai reader reads back as they are are now
written as meshes:

- Each mesh is a /Mesh record: 2 /Version, its type and grid size,
  /Data, then each patch row by row with its place, the color space
  where it changes (gray, RGB or CMYK) and its four corners: color,
  opacity, point, and the handles towards the next corner and the one
  before it. Its opacity, blending mode and knockout shape are set
  before the record, and its name and opacity mask follow it.
- A reflected mesh, whose patches all turn the other way, is written
  with its columns in reverse order, which draws the same mesh.
- In a symbol's art the corners are written about the canvas point of
  the ruler origin, y up, as an image's matrix there is. An envelope's
  grid in a symbol's art is now written in the same space, and the
  envelope's contents in its dictionary in the canvas's space, y down.
- Each mesh is checked with the reader's own reading before it is
  written. Written as their drawn look with a warning: meshes with a
  point in a Lab color, with more than 128 rows or columns, folded
  meshes (patches that turn different ways), meshes the reader would
  read with other points, handles or colors, meshes in pattern tiles
  and in art cut to a clipping object, and every mesh on a large
  canvas. A mesh's drawn look is written at any depth of nested
  symbols and live objects.

Each construct is written in the form the .ai reader at e142c5fcee
reads: /CS, /Type, /Size, /P, /N and /E in mesh.rs:180-234, corners
with or without an opacity by their count of values in read_corners
(mesh.rs:239), the patches joined into one mesh in one_mesh
(mesh.rs:298); /Mesh X!, X# and /End X! in read/ops.rs:219-232; the
transparency after the record in read/art.rs:281 (end_mesh) and
read/ops.rs:344. /Version and /Data are passed over by that reader
(mesh.rs:234). Corners in a symbol's art rest on a reader change in
this commit.

The reader changes how any .ai opens:

- Mesh records and envelope grids in a symbol's art are read in canvas
  space (read/document.rs:947 image_space), and an envelope's contents
  in its dictionary in the canvas's space, y down. In a file without a
  template box such a mesh is left unread, its symbol is not read
  whole, as with an image there (read/art.rs:634), and its instances
  open as the page draws them. Envelopes in symbols in .ai files saved
  by earlier VectorCraft builds open differently.
- A point of a patch whose corners differ in color model keeps its own
  color when the patches are joined into one mesh.

Gradient meshes, mesh points and their opacity:
https://help.adobe.com/archive/en_US/illustrator/cs5/illustrator_cs5_help.pdf#page=200
Patch meshes (corners joined by cubic edges with control points):
https://opensource.adobe.com/dc-acrobat-sdk-docs/pdfstandards/pdfreference1.7old.pdf#page=321

Tests: the round trip of meshes with RGB, CMYK and gray points, a moved
point with handles of its own, part-transparent points, a name,
opacity, blending mode and knockout shape, hidden and locked, with an
inverted, unlinked opacity mask, in groups, opacity masks, symbols,
opacity masks in symbols, a document of two artboards and eight levels
down, compared point by point, handle by handle and channel by channel
at the 4 decimals written; reflected meshes, mirrored across and
along; the record's form, including corners in a symbol's art and an
envelope's grid and contents there; an envelope in a symbol read back
with its contents and their gradient in place; the same bytes on a
second write; each case written as its drawn look, with its paths read
back over the mesh's box; reading a mesh in a symbol's art with and
without a template box; /Version and /Data passed over; the color
model rule; fuzz cases for damaged written meshes, a symbol's
included.

Docs: docs/file-format-parity.md, docs/target-app-parity.md.
2026-11-16 13:44:56 -08:00
datatimp 79906094b6 Layers panel: an Alt-drag copies a row above or below itself (#8237) 2026-11-16 16:44:20 -05:00
dotCooCoo d9895e3831 .ai import: a live blend keeps its record's orientation and no spine
Two settings of a blend read from the editing data came from rounding
instead of from the file:

- The orientation was whichever of Align to Page and Align to Path laid
  the steps out closer to where they are drawn. The check compares the
  steps' centers, which turning the steps along the spine leaves in
  place, so on a straight spine both fit and the rounding of the drawn
  steps decided. The reader now reads the record's word 5 (0 is Align to
  Page; a 32-bit float of 8 or more is Align to Path) and keeps that
  orientation when it lays the steps out as drawn: in place, at their
  drawn sizes and with each one's outline where it is drawn, which
  turning a step moves. Otherwise it takes the closest, as before.
- A blend with no spine part opened with a straight spine and an anchor
  at each key. When its record names the keys in their order, it now
  opens with no spine of its own, which lays out the same straight
  lines between the keys' centers. A record that names them in another
  order still gets the straight spine in the record's order.

Blend Options, orientation and spines:
https://helpx.adobe.com/illustrator/desktop/manage-colors/apply-transparency-and-blending/blend-options-overview.html

Tests: the record's word 5 (0, 8, 8 plus an angle, and values that name
no orientation); the record's orientation kept where both lay out alike,
and not taken where it would turn the drawn steps (rectangles on a
vertical spine, triangles on a spine running right to left); outlines
that match whatever anchor a path starts at, with another anchor on a
side, with contours in another order and with a lone anchor, and live
art compared by its size; a blend with no spine part in record order
and in the other order.
2026-11-16 13:30:18 -08:00
dotCooCoo 4557e10248 Save PDF: Reset with a deleted preset is an error
When the saved preset the Save PDF dialog has chosen is deleted while
the dialog is open, Reset now returns an error naming it, shown in the
status bar, and leaves every field, passwords included, as it is. A
dialog's reset callback returns a Result for this; Flare Tool Options
and Objects on Path Options return Ok. The ui.dialogReset params text
and docs/mcp.md name the error.
2026-11-16 13:21:14 -08:00
dotCooCoo 99ccdb790a Image Trace: Flat Logo docs count a gray stroke's loss at black in pixel centers
The parity line said a soft-edged gray stroke running out of black loses
"3 or 4 pixels" where it meets black. It now says 3 or 4 of the 16 pixel
centers along its middle nearest black, as docs/image-trace-adjustments.md
and the test count them.

In docs/image-trace-adjustments.md, gray near black on blurred edges now
traces gray at fewer of its pixel centers instead of "losing pixels", a
wider band loses some or most of its gray instead of part of it (bands 3
and 4 pixels wide at a blur of 1 pixel keep about 60 of 336), and the
paragraph is wrapped to the file's line width.
2026-11-16 13:04:10 -08:00
datatimp ffea517835 Docs: #8217 evidence in target-app-parity 2026-11-16 16:02:02 -05:00
dotCooCoo 772c7c2ce5 Graphic Styles: a style dragged onto Delete Graphic Style is deleted
A graphic style dropped on the Graphic Styles panel's Delete Graphic Style
button is deleted the way the button deletes: after asking, or at once with
Alt held, in one undo step. The button takes the drop with no style
highlighted and is outlined while a style is held over it. A highlighted
style brings the other highlighted styles with it; art linked to a deleted
style keeps its look and is no longer linked. Other drags are ignored.

Docs: docs/mcp.md (graphicStyle.delete), docs/target-app-parity.md.
2026-11-16 13:00:45 -08:00
dotCooCoo 2d9b36ec7e Image Trace: Flat Logo band test checks the widths left unchecked at blurs of 1 and 3 pixels
The band test now also sums the samples traced gray for bands 3 and 4
pixels wide blurred by 1 pixel (about 60 of 336 over the three grays;
16 without the sharp-edge stop) and for bands 4 pixels wide blurred by
3 pixels (about 39 of 192).

across_edge decides from the first step alone whether one side's edge is
sharp, so each side's path is walked once. On 856 code-drawn band and
stroke cases and 39 images the results are the same as before.

The docs count pixel centers instead of pixels, write "0.6 pixels"
throughout, give the parity line's band claim its bound of 1 in 16, and
state again that a light gray stroke 6 or 8 pixels from black keeps its
gray because its pixels do not reach black in 5 steps.
2026-11-16 12:54:49 -08:00
dotCooCoo 8871799a0a Docs: UI chrome row records the Preferences field descriptions
The UI chrome area row names the General and Selection & Anchor Display descriptions; score and hours are unchanged.
2026-11-16 12:52:56 -08:00
dotCooCoo 3c7222b27e Metafile import: each line of text with advances splits and underlines on its own
Text on more than one line is placed a line at a time at every
alignment, and each line splits where an advance that tracking can't
give puts its characters, as a single line does. An underline or
strikethrough also runs on to the end of a line's last advance when
tracking can't reach it.
2026-11-16 12:50:23 -08:00
dotCooCoo 0661f0409f Tabs: dragging a tab stop draws a guide through the selected text
While a stop is dragged on the Tabs panel's ruler, the canvas draws a
line through the text whose stops the ruler shows, where the stop would
land. For area type it crosses the frame cell the paragraph starts in,
measured from where the first line starts (inside the inset, or past a
text wrap object); for point type it crosses the paragraph's lines from
the type's origin. It turns with rotated type and runs across the
columns of vertical type. In a Ctrl-drag (Command on macOS) it follows
the grabbed stop. No line shows while a release would delete the stop,
and it goes on release, Escape, when no button is down, or when the
panel is not drawn. It is not a document object and records no undo
step.

A stop drag whose release the ruler does not get now ends once no
button is down, as a marker drag already did.

The help page describes this guide:
https://helpx.adobe.com/illustrator/desktop/measure-and-align/grids-and-guides/manage-tab-stops.html
Its extent, color and the rules above are VectorCraft's own.
2026-11-16 12:49:07 -08:00
datatimp 79ef644847 Layers panel: Alt shows the copy cursor while rows are dragged (#8217) 2026-11-16 15:48:45 -05:00
dotCooCoo 3e3c95ec37 Blend: options on several blends set only the values given; id edits one blend
object.blend.options wrote the first selected blend's spacing, orientation,
type, ramp and shift onto every selected blend, whatever the call gave. Each
blend now takes only the values given and keeps its own for the rest, through
one closure used for the selection and for `id`.

- `id` edits that blend alone. A hidden or locked blend and an object that
  is not a blend are errors, and the blend's own spine decides whether
  easing is allowed.
- A call that changes no blend records no undo step.
- The Blend panel's Ramp and Shift sliders share one helper: a drag
  previews on the canvas and records one undo step on release, instead of
  one per frame.

Builds on #8022 by ruchirguitar.

Docs: docs/mcp.md, docs/target-app-parity.md.
2026-11-16 12:42:53 -08:00
dotCooCoo 30d5552795 Select: Object > Direction Handles selects the paths with one set call
Direction Handles cleared the selection and then added each path on its
own, and each add searched the paths already selected, so building the
selection took time that grows with the square of the path count. The
command now selects the paths with one Selection::set call and adds the
anchor sets in one extend. The selection is the same: paths keep their
order, a repeated path keeps its first place and its last anchor set,
and the side fields are cleared as before.

crates/engine/examples/direction_handles_bench.rs times both ways on the
same paths in one process. With 20,000 four-anchor paths, building the
selection takes 1.9 ms of thread CPU time against 69 ms one path at a
time.
2026-11-16 12:39:16 -08:00
dotCooCoo 4351143a2a Metafile import: multi-line text with advances aligns each line by its own advances
Centered or right aligned text on more than one line was placed by the
span of all its advances together, so a second line moved the first.
Layout also leaves the tracking after each line's last character out of
the width it aligns, so one object can't align every line by its
advances. Such text now becomes one point type object per line, each
aligned by its own advances and placed on its line's baseline. Left
aligned text stays one object.
2026-11-16 12:38:25 -08:00
dotCooCoo 6be2ef508b Save for Web: Optimize to File Size picks the settings that bring the image under a typed size
Optimize to File Size… under Preset opens rows for a desired size in K (1024 bytes), Start With
(Current Settings, Auto Select GIF/JPEG) and, with slices, Use (Total of All Slices, Each Slice,
Current Slice). OK takes the settings whose files fit, measured by encoding, and the dialog shows
the size found or says that no setting tried fits.

- webExport.optimizeToFileSize searches JPEG quality or GIF/PNG-8 colors, then GIF lossy 100,
  encoding at most 32 trial settings. A lower value can give a larger file, so it measures up to
  6 values spread over the range before it narrows the step. It writes no file and changes no
  remembered setting.
- A desiredK that is missing, not a number, 0 or less, or above 1048576 is an error, as are an
  unknown startWith or use and a bad slice.
- The slices share one setting, so every Use choice changes all of them.
- The result line is dropped when the art or the selection changes.

Docs: docs/mcp.md, docs/target-app-parity.md.
2026-11-16 12:37:47 -08:00
dotCooCoo 2f7e60dd54 WebP: Lossy with a Quality setting writes a lossy WebP file
WebP Options has a Compression menu (Lossless, Lossy) and a Quality
slider from 0 to 100 that is enabled for Lossy. document.export,
document.serialize and Export for Screens take lossless: false with
quality (default 90) and write a VP8 file, with an ALPH chunk that keeps
the alpha exactly when some pixels are not opaque. Lossless stays the
default. A WebP quality above 100, or one that is not a whole number,
is refused with an error.

The encoder is the one craft-image-codecs already provides; no
dependency changes. The note that lossy WebP isn't available, its
catalog rows and the format text that described it are removed.
2026-11-16 12:30:56 -08:00
dotCooCoo 0b87940421 Packaging Tools: Fold Preview halves the print down to one pixel and reads #-named swatches
The print raster stopped after two halvings, so a 2,048-pixel print seen
far out sampled a 512-pixel level and fine art aliased. It is now halved
down to one pixel, and each halving weighs an odd last row or column by
the part of the print it covers, so an edge color does not spread across
a small level.

A swatch whose name starts with # could not be the inside color, and one
named like a hex color drew that hex color. The inside is now looked up
as a swatch first and read as #rrggbb only when no swatch with a plain
color has that name.
2026-11-16 12:26:28 -08:00
dotCooCoo c0667364ed Navigator: View Artboard Contents Only is on by default and hides art outside the artboards
The Navigator panel menu item View Artboard Only is renamed View Artboard
Contents Only and is now on by default. While it is on, the thumbnail
fits the artboards and draws only the art inside them: art on the
pasteboard and in the gaps between artboards is left out, and a shape
that crosses an artboard's edge is cut there. Before, the option only
narrowed the thumbnail to the artboards' bounding box, so art in the
gaps and past an artboard's edge still showed.

The choice is kept with the UI state for every document, instead of
being lost on restart. UI state saved without it reads it as on, and a
saved off stays off. A user who wants the pasteboard art in the
thumbnail turns the menu item off, or runs
ui.navigatorPanelOptions {viewArtboardContentsOnly: false}.

- ui.navigatorPanelOptions takes viewArtboardContentsOnly (true or
  false; any other value is an error and changes nothing) and answers
  {color, solidDashes, viewArtboardContentsOnly}.
- The renamed label has a row in every catalog that had the old one.

Docs: docs/mcp.md (Navigator panel options), docs/target-app-parity.md.
2026-11-16 12:25:17 -08:00
dotCooCoo 7036cfb67c Merge main into feat/print-custom-scale-link 2026-11-16 12:16:47 -08:00
dotCooCoo 51efeba7b4 Save PDF: holding Alt turns Cancel into Reset
While Alt (Option on macOS) is held, the Save PDF dialog's Cancel button
reads Reset. Reset (or ui.dialogReset) puts every option back to the
chosen preset's settings, clears the passwords and their checkboxes, and
leaves the dialog open with its preset, path, artboard range and section.
A saved preset deleted while the dialog is open leaves the options as
they are.

Choosing a preset now also clears the Security section's password
checkboxes, which stayed checked with an empty password before.
2026-11-16 12:11:49 -08:00
dotCooCoo 4044496105 Merge main into feat/prefs-descriptions-selection 2026-11-16 12:10:24 -08:00
dotCooCoo 886450010a Transform: the Align to Pixel Grid state is worked out once per document revision
The Transform panel measured the selected objects' Align to Pixel Grid state on every frame, looking up each object and its parent and collecting their ids. With Select All in a large document that cost tens of milliseconds a frame. The state (on, off or mixed, and whether every object can be aligned) is now kept in the canvas cache for the document's uid and revision, and the ids are listed only when the box is clicked.
2026-11-16 12:08:55 -08:00
dotCooCoo db630b401a Merge main into feat/arrange-documents-layouts 2026-11-16 12:05:18 -08:00
dotCooCoo cb060a0ea7 Merge main into feat/packaging-fold-preview 2026-11-16 12:04:49 -08:00
dotCooCoo 5171378fd5 Merge main into fix/symbol-drop-across-documents 2026-11-16 12:02:44 -08:00
dotCooCoo aac6250a07 Merge main into fix/blob-params-rejected 2026-11-16 12:01:23 -08:00
dotCooCoo 473b887542 Merge main into feat/flare-alt-click-default 2026-11-16 11:59:16 -08:00
dotCooCoo 10054f611b Merge main into fix/issue-8047-group-marquee 2026-11-16 11:58:46 -08:00
dotCooCoo a616ccfd09 Merge main into fix/shortcut-row-names-translated 2026-11-16 11:57:36 -08:00
dotCooCoo 7953a12116 Metafile import: EMF and WMF text keeps the character advances the file gives
Follows #7608. Text from EMF, WMF and EMF+ pictures was laid out with the
font's own spacing, so the per-character advances the file gives
(ExtTextOut's lpDx, EMF+ DrawDriverString glyph positions) were dropped.

- Characters are spaced by their advances as tracking, with pair kerning
  off. When a ligature forms at one tracking and breaks at the next,
  standard ligatures are turned off for that text.
- On a single left to right line, an advance that tracking can't give
  (wider than its range, or a tab) starts a new point type object where
  the advance puts it, also between the letters of a ligature the
  tracking breaks apart. An underline or strikethrough is filled across
  the space between. Right to left and multi-line text stays one object.

ExtTextOut: https://learn.microsoft.com/en-us/windows/win32/api/wingdi/nf-wingdi-exttextoutw
DrawDriverString: https://learn.microsoft.com/en-us/openspecs/windows_protocols/ms-emfplus/b794b780-e9a8-4682-af65-9b614aecfbe6
2026-11-16 11:57:10 -08:00
dotCooCoo c8142c33b6 Merge main into feat/windows-screen-color 2026-11-16 11:56:57 -08:00
dotCooCoo 825cfdd750 Shapes: double-clicking a live shape's corner widget with a shape tool shows the Transform panel
With Rectangle, Rounded Rectangle, Ellipse, Polygon or Star active, a
double-click on a visible corner widget of a selected live rectangle or
polygon shows and selects the Transform panel (window.panel.activate),
wherever it is: closed, docked behind another tab, floating, in an icon
column or in a dock hidden by Tab. A second double-click keeps it on show.
The tool, the selection, the document and the undo history stay as they
were. Pie widgets, spots off the widgets, Line Segment, plain paths and
hidden or angle-excluded widgets do nothing; the Selection and Direct
Selection tools keep their double-click behavior.

Tools return the new Action::Panel, which the engine forwards as
UiRequest::Panel; the desktop app activates the panel, and a headless
pointer_gesture reply carries {"panel": id} in its requests.

Docs: docs/ui-parity.md (#5477 row, also correcting its statement that the
bounding-box handles scale only with the Selection tool) and
docs/target-app-parity.md.
2026-11-16 11:56:38 -08:00
dotCooCoo d5aea15674 Merge main into feat/symbols-drag-to-delete 2026-11-16 11:56:24 -08:00
dotCooCoo d33d008010 Merge main into fix/expand-pieces-raster-budget-ids 2026-11-16 11:56:08 -08:00
dotCooCoo 52fcf89a80 Save for Web: holding Alt or Option turns Cancel into Reset
While Alt (Option on macOS) is held, the dialog's Cancel button reads
Reset. Reset puts the remembered settings back, or the defaults when none
are remembered, on the current document's active artboard. It drops a
pending preset, a pending Done left by a Done that failed, the preset name
being typed and the selected color table entry, and keeps the view, zoom,
connection speed and path. It does not remember or write anything, and the
dialog stays open. `ui.dialogReset` does the same.
2026-11-16 11:52:29 -08:00
dotCooCoo ca14cf5a11 Merge main into feat/font-menu-recently-added 2026-11-16 11:51:53 -08:00
BFlat 5fd8cf2c45 Merge pull request #7378 from dotCooCoo/fix/svg-filter-messages-tr-labels
i18n: SVG filter refusals are translated, and side-by-side menu items differ
2026-11-17 02:51:10 +07:00
BFlat 3e75a7eae7 Merge pull request #8013 from dotCooCoo/fix/transform-copies-raster-effects-groups
Effects: each copy of a group's or layer's Transform effect carries the raster effects before it
2026-11-17 02:50:52 +07:00
BFlat fb6845b07a Merge pull request #8161 from dotCooCoo/perf/cut-selection-one-pass
Cut: take the cut objects out of the selection in one pass
2026-11-17 02:50:44 +07:00
BFlat 3e9947ac9d Merge pull request #8179 from dotCooCoo/feat/graphic-styles-drag-to-new-duplicates
Graphic Styles: a style dropped on New Graphic Style is duplicated at the end of the list
2026-11-17 02:50:36 +07:00
dotCooCoo 01d362ac4e Preferences: the line under the fields describes each Type setting
The line under the Preferences fields now shows a sentence for each of
the 23 Type settings when the pointer is over the setting's row or its
control has the keyboard focus, and a screen reader gets the same
sentence. Each sentence states what the app does with the setting, such
as which keys step by each increment and which panels show the East
Asian and Indic options. Every complete catalog has a row for each
sentence.

The empty-line test now points at Guides & Grid › Gridline every, a row
that still has no sentence.
2026-11-16 11:50:28 -08:00
BFlat d481433eb9 Merge pull request #8163 from dotCooCoo/feat/symbols-drag-to-new-duplicates
Symbols: a symbol dragged onto New Symbol is duplicated
2026-11-17 02:50:27 +07:00