Clicks, the hover pointer and marquees with the selection tools already
leave out the area that raster effects paint beyond an object. New tests
in crates/engine/src/tests/select_effects.rs hold that in place for drop
shadows, Outer Glow and Gaussian Blur on paths, groups, point type,
symbol art and images, for Shift-click, Direct Selection, the hover
pointer, a drag from a selected object's shadow and a marquee. hit_leaf
gets a doc comment, and docs/target-app-parity.md gets a line citing
https://helpx.adobe.com/illustrator/using/selecting-objects.html.
* fix(svg): first element of an id, shared linked file reads, bounded blank lines
* address review: cache failed linked-image reads but give each href its own placeholder and link
* address review: charge only blank lines to the line-break budget
* address review: a collapsed line break keeps its measured leading in tiny type
* address review: blank lines use the same scaled leading tolerance
random_seed passes the OS random source's result to random_seed_from, so a test can
give it a known value and check the seed it makes, instead of only reading the source text.
Follows #6614. When a closed subpath's refit in two and in three parts is
still lines that enclose no area, for example an S curve closed by a
straight edge whose cut points all lie on that edge, Simplify now splits
each segment in 2, 4, 8 and so on (up to 1,024 pieces, 65,536 in all)
until every piece is within the tolerance of the line between its ends
and those lines enclose an area. With Convert to Straight Lines those
lines are the result; without it the subpath stays as it is. A subpath
whose points are all in line keeps the refit's lines, so its extra
anchors are still removed. Lines count as enclosing no area when every
point is within 1e-6 pt of one line.
An error a finally block passed on unchanged was reported at the end of
that block, in script.run's report and in the Script Console, because the
block's end raised the error again at a new site. The interpreter now keeps
the site of the exception each finally block runs for, keyed by the stack
slot that holds it, and the block's end throws the exception on from that
site. This holds through nested finally blocks, called functions, resumed
runs and marked host errors. An error the finally block throws is reported
at that throw, and one its return, break or continue discards is not
reported.
Type › Dynamic Text (`type.dynamicText`, also on the Contextual Task Bar
for type on a path) scales the text by one factor so it fills the span
between its start and end brackets, and the layout fits it again after
each edit to the text, the path or a bracket. The first character's
size moves in 0.1 pt steps within 0.1 to 1,296 pt. Turning it off, or
threading the type, keeps the sizes it was drawn at.
- The model saves `dynamicText` only when on.
- SVG, the legacy .ai writer and the .ai editing data write the drawn
sizes through `vectorcraft_text::drawn`; the editing data warns that
the setting is not written.
- Shrink Text to Fit and Dynamic Text step the size the Character panel
shows when a size measures the cap height, x-height or ICF box.
Docs: docs/mcp.md, docs/type-parity.md, docs/target-app-parity.md.
Part of #4134.
Each realm seeded Math.random from std's RandomState. On
wasm32-unknown-unknown its keys come from stack and heap addresses,
which are the same on every page load, so scripts in the web build
drew the same sequence each time the page opened.
The seed now comes from getrandom (crypto.getRandomValues in the
browser, as crates/pdf/src/encrypt.rs already does), with RandomState
kept as the fallback when it fails.
vectorcraft_plugins exports FUEL_SLICE and BYTES_COPIED_PER_FUEL (hidden
from the docs), and the bulk memory fuzz cases use them for the passes
around one slice, the lengths around one unit of fuel and the fuel
estimate, in place of the copied 20,000,000 and 64.
The Save PDF dialog's General section gets "Write pages longer than 200 in
at full size in points" (longPagesInPoints in document.exportPdf,
document.export, presets and document.pdfSettings), off by default. When it
is on, a page with a side longer than 14,400 pt is written with its media
box in points and no /UserUnit at every PDF version, and a PDF 1.5 file
stays PDF 1.5. The export's warning for such a page then says it is written
in points. With the option off, and for pages of 14,400 pt or less, the
file is the same as before.
Docs: docs/mcp.md, docs/target-app-parity.md. The new label has a row in
every catalog that lists the dialog's other options.
The 27 commands that act on `ids` or else the selection (Apply as
Filter, Print Ink Fixes, the Arrange, Cleanup and Path Tools plug-in
commands, Smooth, Text Wrap, variable.bind and variable.unbind among them)
refused `ids: null` with "ids must be an array of non-negative integer
object ids". They now read null as `ids` left out, as the other commands
that take `ids` do. Remove Breaks also reads null as left out when it
decides whether to act on the characters the Type tool selected.
The status message already ends in an ellipsis and shows its full text
on hover when it is clipped. The Help Bar's hint and the tool name in
the status bar ran past the window edge instead; the Dimension tool's
hint is wider than an 800-point window. Both now end in an ellipsis and
show their full text in a tooltip on hover. Screen readers receive the
full text, and text that fits shows no tooltip.
In a narrow status bar the tool name now ends in an ellipsis before it
takes the status message's room. Before, the tool name could leave the
message almost no width.
The tooltips of the clipped hint, tool name and message wrap to fit
inside the window. egui's tooltips are 500 points wide, which is wider
than an 800-point window at UI Scaling 1.6 or more.
The hint and tool name tests fail without the change. The status
message test covers its existing ellipsis and tooltip.
Ruler guides were a list kept beside the layers. Each guide is now an
object of its layer or sublayer, always directly in it and above the
layer's art. These behave as on main:
- Guides draw on screen only. Exports (SVG, PDF, PNG, PSD), Fit All,
Select All, the art bounds, clicks and marquees, and a layer's
Pathfinder and Transform effects leave them out. The Layers panel
lists them as guide rows of their layer, the highest guide.list
index first.
- Deleting a layer deletes its guides, and merging layers keeps their
guides in the merged layer.
- The guide commands number guides as guide.list does, in the order
they were made.
New: each guide takes an id from the document's object ids. An object
command given a guide's id fails with an error, and node.move cannot
put a guide into a group or out of its layers. A guide made while an
opacity mask, a symbol or a pattern is edited moves to the top
visible, unlocked layer when editing ends.
File format: native files still save the guides in the document's
guides list, in every file version, so older builds read them. Each
entry may now also carry the guide's id, name, locked and hidden
flags; older builds ignore those fields. Opening a file puts each
saved guide on its layer (on the top visible, unlocked layer when the
file names none or a layer it does not have), and each saved guide
counts against the object limit for opening a file. A ruler guide node
that a file holds below a layer's art moves up to the layer's guides,
and one anywhere else (in a group or another object, beside the
layers, or in a symbol) is removed. Ruler guides read from an .ai file
become guide objects on the layer they were on, numbered in the order
the file lists them.
The test for new XML with a one-item list now starts from an item that
has a parent, an attribute and a child. It checks that the copy has no
parent and that changing the copy's attribute and child leaves the
original unchanged, so a copy that drops or shares the children fails.
Outside Windows, `\\host\s\x.txt`, `\\?\C:\x.txt` and `\\.\pipe\x` are
relative file names in the script's folder, so `exists`, `open` and
`getFiles` look them up. The test now expects no lookups for them on
Windows only, and on macOS and Linux checks `//host/s/x.txt`, an absolute
path outside the folder, alone. The returned values are the same on every
platform.
The folder the Additional Plug-ins Folder preference or plugin.reload last loaded is kept for the
whole process. The six engine tests that set the preference or run plugin.reload now hold one lock,
so another test loading its own folder between two steps cannot change what the next step loads or
lists.
new XML(list) now returns a deep copy of the list's single item, as
ECMA-357 section 13.4.2 specifies for an XMLList argument; before, it
returned the item itself, so changes to the new value changed the list.
insertChildAfter and insertChildBefore take one unit of fuel for each
child they compare with the reference, as childIndex does.
The test for the missing xpath method now checks the XML and XMLList
prototypes; reading .xpath on a value selects child elements and
returned an empty list in every case.
`color_name` clamps each component before rounding, but `clamp` keeps a
-0.0, so a color with a -0.0 component was named "R=-0 G=128 B=-0" (and
"K=-0", "Gray K=-0" in CMYK and Gray). Adding 0.0 after rounding turns
it into 0, as the Lab branch already does.
The params docs now state the direction (and the zero) of each angle or
rotation a command takes; behaviour is unchanged. Shape creation, text.create,
the grids, add-on shapes, saved views, Liquify, Puppet Warp pins, Mirror and
Radial Repeat and Vector Halftone turn clockwise; text character rotation,
gradients, the eraser tip and print screen angles turn counter-clockwise.
view.saved.new's rotation note changes its schema, so the API level goes to 3.
A test walks every command's params doc and fails when a param named like an
angle or rotation doesn't say clockwise or counter-clockwise.
dotCooCoo