* SVG export: preserve document unit in viewBox and width/height (#864)
When exporting SVG documents with physical units (mm, cm, in, pc), emit
the physical unit suffix on the root <svg width=... height=...>
attributes while keeping viewBox numbers and inner coordinates in 1:1 points
per SVG 1.1 coords §7.10. This avoids the 75% scaling mismatch when opening
drawings in external tools such as Inkscape or LightBurn, and preserves
the document unit setting across save/open round trips. Unitless documents
(points, pixels) continue to emit unitless dimensions.
Tested via export_physical_units_writes_unit_suffixes in vectorcraft-svg
and full round-trip svg_round_trip_preserves_document_units in vectorcraft-engine.
Ran cargo xtask ci (fmt, clippy, tests, xtask gates).
* SVG export: preserve nonzero width and viewBox on extreme small dimensions
Once a shape has used its 1,048,576 splits at any depth, Add Bounding Circle
still splits each further curve into up to 8 pieces, from a second budget of
7,340,032 splits shared among the shapes as the first one is. Only after
both are used up does a curve count whole by its control points' hull cut
down to its bounding box. Before, every curve past the first budget counted
whole, which can make the circle around a circle about 14% larger; with the
8 pieces the fit stays less than 0.3% larger.
- The comment on the shared budget no longer claims that the shape around
one object is independent of the other objects selected.
- shapes::enclosing_circle and convex_hull move below the star helpers.
- The "Each" label mapping in the dialog form sits after "Flip Cols".
- docs/mcp.md and docs/target-app-parity.md describe both budgets and the
size of the fit before the 0.01 pt is added.
- Export Selection to HP-GL checks the selection and starts Pen Table
from its pens, as the export writes it, and `exportSelection` is no
longer remembered for the next whole-document export.
- Pen Table with options or an artboard choice the export refuses keeps
One Pen per Color and shows the error, instead of starting from one
black pen that corrected options would keep. `automatic_pens` returns
that error.
- `automatic_pens` refuses `rect`, as `check` and the export do.
- A save panel shown in line that is canceled keeps the dialog open,
and a canceled save panel keeps the options remembered before.
Add Bounding Circle splits the curves of one command 1,048,576 times at
most in all, shared equally among the shapes with `each`. A piece that
still bends after the last split counts by the hull of its control points
cut down to its bounding box, so a large circle near the canvas edge keeps
a close radius.
- A path of a compound path selected on its own counts as an object, as
`object.transform` moves it, for both commands.
- A small loop whose ends meet gets a circle instead of being taken for a
single point.
- The smallest enclosing circle measures its radius from the center it
returns, after the move back from the first point, and does not copy
the hull to do so.
- The params text, docs/mcp.md and docs/target-app-parity.md describe the
limit and the compound path rule.
While a linear dimension is placed, each preview starts again from the
document as the placement began. The tool now reads the lines of the
other dimensions from that document (the new ToolContext field
interaction_doc), not from the document a command changed in between, so
a dimension that a command moves or hides and that the next preview puts
back does not leave the placed dimension on a level the committed
document does not have.
The engine test now drags a dimension out, runs dimension.update or
object.hide on the other dimension, releases, and checks the committed
line against that dimension as the document has it. The tool test that
checks which dimensions read lines also covers radius and diameter
dimensions.
On a cubic that counts as a circular arc but strays slightly from the arc's circle, the circle on the other side was placed against the arc's circle, a few points off the path. It now sits one radius out from the point on the path. The Undo test also checks that the click after Undo draws the first circle's own circle.
An isolated ruler guide left the Layers panel with no rows, since the
panel lists no object row for a ruler guide. object.isolate now returns
"ruler guides can't be isolated" and isolation mode stays as it was.
The Sizer's and the Sprayer's Average compare each instance's size on the page, so a set that
holds instances of different symbols meets at their mean drawn size. A symbol without a recorded
size is measured by its art, once per command. With Size: Average and no instance under the brush,
a sprayed instance has its symbol's own size whatever `scale` is, and new instances are spaced by
the size they are placed at. With Use Pressure Pen, a drag sample at the same position is kept when
the pressure changes by 0.05 or more.
shape.curvatureCircle's description and docs/mcp.md now say a smooth mark only overrides the corner test when both handles are pulled out and no segment of no length lies before the anchor. The tool and docs/mcp.md say the pointer reaches the drawn circles again once another tool is chosen.
Narrowing a scope that already carried two composed gates replaced the earlier gate's chain with the new gate, so a path only that earlier gate refused could be read. The new gate is now added at the end of the chain.
A click on the last anchor retracts its handle, an Alt click over the path
goes to the Anchor Point tool, and a join with an end that lies on the last
anchor merges the two ends. None of these adds a segment, so no rubber band
shows there. The measurement label measures to the anchor the band ends on
instead of the snapped pointer. A press and a hover no longer search for an
end at the snapped point when snapping left the pointer where it was.
OK closes the dialog and renames nothing when another document has
become the active one, or when the color group at the group's place in
the list no longer has the name and swatches the dialog opened with.
swatch.renameGroup makes a drag still in progress an undo step of its
own first, so canceling or undoing the drag leaves the rename.
ui.colorGroupOptions without group opens on the color group selected
alone in the Swatches panel, as long as the panel's selection still
belongs to the active document and art.
The panel's selection follows renames in a command.batch only up to the
first step that may switch documents or replace a group. Ungroup Color
Group and Delete Swatch take the names they removed out of the
selection.
The es catalog had the missing `group` and no colour group `{group}`
rows twice after the last merge of main; the duplicates are removed.
- A scope narrowed to the confirming caller keeps the script gates of both,
and reads are exempt from them only where both scopes exempt them.
- A file read off the UI thread does the rest of its read after its profile
answer (linked files and type) off the UI thread too; an open a caller
asked for by path still finishes before OK returns.
- When any solid's mapped art passes the shared limits, every solid in
the effect draws without its mapped art, so Invisible Geometry hides
all of them or none.
- A revolved group lists its surfaces with the members' shared curve
sampling, and an extruded group lists none past the faces of one
object.
- Commands refuse art on walls, bevels and Revolve's side whose curves,
cut into straight pieces at the map's scale and placed about the
surface's center, pass 400,000 points. Caps are not counted.
- Each contour's bounds test counts as a cut, in Map Art and in the side
graphics.
- On a facet whose curved edge bows out of its cell, the art reaches the
whole facet.
- A bevel as deep as the solid leaves no walls, and its bevels take the
numbers after the caps.
- Surfaces past the face limit are refused as the side is.
- threeD.mapArt keeps a deleted symbol only while the request leaves
`symbol` out.
Enter between the press and the release of a click now ends that press,
so the release sets no reference point and starts no Reflect axis behind
the dialog. A press the engine drops ends whether or not it became a
drag, and drops a waiting axis, so the release sent after it starts no
axis. A press whose document or selection changes before it becomes a
drag is dropped, so the reference point or axis set for one selection
is never applied to another.
The engine test checks that the Alt copy is reflected across y = 300.
The docs state that the first click is a plain click, that the 3 px
check compares the snapped points, and what a double-click does while
an axis waits.
- An absolute-colorimetric conversion from CMYK starts from the source's
absolute appearance.
- An assigned profile that was removed counts as the working space when
copied colors are compared.
- Colors that can't convert are listed with convertible false, start on
Preserve Numbers, and the dialog disables Convert for them.
- Paste on All Artboards leaves the backgrounds of copied artboards out of
the question (clipboard.profileMismatch allArtboards).
- A converting paste into its own document keeps its image keys.
- An open answer is refused once Color Settings change the question; the
dialog asks the new question, or opens by the policy.
- Files opened while a question is open ask their own questions in turn.
- OK on the paste question and on Swatch Conflict checks again where the
paste runs and asks again when the question changed.
- docs/mcp.md and the command help describe these rules.
tool.setOption now accepts usePressure, method, showBrush, the Symbol
Sprayer options, proportional and affectsDensity for the Symbolism
tools, so the Symbolism Tools Options dialog can save them. The dialog
checks every option, the number ranges included, before
symbol.setDensity re-spaces the selected symbol sets.
- Size: Average gives a sprayed instance the mean size under the brush,
or the symbol's own size with none there, without the size jitter.
- A stroke that moves an instance away and back again does not count
it, and adds no undo step.
- symbol.adjust reads an instance's own values for Average only.