Commit Graph
120 Commits
Author SHA1 Message Date
dotCooCoo 7ff63a6cd7 Merge main into feat/line-segment-common-tangent 2026-11-15 18:40:40 -08:00
BFlat 765334b9a6 Merge pull request #8010 from dotCooCoo/feat/tangent-circle
Path Precision Tools: Tangent Circle draws the circles that touch two or three shapes
2026-11-16 09:33:03 +07:00
dotCooCoo 4ad75291cb Path Precision Tools: Tangent Circle draws the circles that touch two or three shapes
Object › Plug-ins › Path Precision Tools › Tangent Circle…
(`addon.pathtools.tangentCircle`) draws the circles that touch two
selected paths or compound paths at a set radius, or that touch three of
them. A circle touches a shape when it meets the outline without
crossing it, with the whole outline outside the circle or inside it: at
a smooth point it is tangent there, and at a corner or an open end it
passes through that point. Circles, ellipses at any angle and other
closed or open paths all work; the members of a compound path count as
one outline.

When every shape is a circle, the circles are found in closed form (up
to eight for three circles, the problem of Apollonius) and then moved
onto the drawn Bézier circles, which differ from true circles by up to
0.0273% of the radius. Other shapes are searched on a grid, and the
centers left are refined with Newton's method on the curves. With three
shapes, circles up to 64 times the diagonal of the box around the
shapes' anchors and handles are found.

The circles are listed by radius, then top to bottom, then left to
right. The dialog takes the radius (with two shapes; 36 pt to start)
and previews every circle found or one picked by number; OK draws them
with the current paint as one undo step, selected. No circle, more than
64 circles (shapes touched along a whole curve, such as two concentric
circles), shapes at one point or too small for the radius, more than
2000 segments and a search past its limits are errors that leave the
document unchanged.

The Tangent Circle and Circle: rows are in every catalog, and the
command's messages in the catalogs that translate messages.

Docs: docs/mcp.md (Path Precision Tools add-on),
docs/target-app-parity.md, docs/ui-parity.md and ROADMAP.
2026-11-15 16:37:17 -08:00
dotCooCoo 0189417e24 Path Precision Tools: Common Tangents draws the lines touching two closed paths
Object › Plug-ins › Path Precision Tools › Common Tangents…
(`addon.pathtools.commonTangents`) adds the common tangent lines of two
selected convex closed paths as separate open paths: external (both
paths on the same side of the line), internal (the lines between them)
or all, and with Centerline the line joining the two centers. An
ellipse drawn with the Ellipse tool is measured as an exact ellipse at
any rotation and scale; any other path must be closed, have one outline
and bend the same way all around, with at most 10000 segments.

Each line runs between the points where it touches the two paths, or
covers a straight side that lies along it. Separate paths have four
tangents, overlapping paths only external ones (two for ellipses), and
a path inside the other none. Paths that touch, from outside or from inside, share
one tangent instead: a line centered on the point where they touch and
as long as the narrower path is wide along it. When there is no tangent
of the kind asked for, nothing changes and the result carries a warning
that says why. The lines take the current stroke and no fill, go
directly above the upper path and are selected, as one undo step. The
dialog has Preview.

The geometry is in vectorcraft-pathops: the tangents are the zeros of
the difference of the two outlines' support values over the normal's
angle, sampled at 720 even steps and at every angle where either
path's touching point passes to another segment, then refined, so the
work per pair is bounded.

Catalog rows for the menu item, the dialog and the messages are in
every catalog.

Docs: docs/mcp.md (Path Precision Tools add-on), docs/target-app-parity.md
and ROADMAP.
2026-11-15 13:48:21 -08:00
dotCooCoo d156bd4da6 Packaging Tools: Make … Line gives paths a fold line role that their swatch carries
Object › Plug-ins › Packaging Tools is a new built-in add-on for the
dielines of boxes and other folded packaging. A path, compound path or
live shape is a fold line when its top stroke is painted with the swatch
of a line role: Cut, Crease, Partial Cut or Perforation. Each document
has a role table (`packagingRoles`) that names the swatch of each role.
By default the swatches are named after the roles. Native files keep the
table and the strokes. PDF prints a role line on its swatch's separation
when the swatch is a spot color, as the default role swatches are. SVG,
DXF and HP-GL keep the stroke's color, so the default role swatches come
out as four colors.

- `addon.packaging.setRole` (Make Cut Line, Make Crease Line, Make
  Partial Cut Line, Make Perforation Line) paints the top stroke of each
  path among the objects with the role's swatch at 100%, through groups
  and clip groups. Locked and hidden objects are left out, also when
  named by id. A path without a stroke gets a 1 pt stroke, a hidden
  stroke is shown, and the stroke overprints unless `overprint` is false.
  A missing role swatch is made as a global spot swatch in the document's
  color mode (Cut 100% magenta, Crease 100% cyan, Partial Cut 100%
  yellow, Perforation 50% magenta and 50% cyan). When a color group or a
  swatch that can't carry a role has that name, the swatch is made as
  "Cut 2" and so on. `none` takes the role away and keeps the color. One
  undo step, none when nothing changes.
- `addon.packaging.roles` counts each role in the selection, or in the
  document while nothing is selected, locked and hidden lines included.
  The Fold Lines panel shows these counts, gives the selected paths a
  role when a row is clicked, and says when nothing is selected.
- `addon.packaging.setRoleSwatch` (the panel menu's Role Swatches…) makes
  another global or spot color swatch carry a role. It refuses missing,
  gradient, pattern, process, tint, [None] and [Registration] swatches
  and a swatch another role has.

When `swatch.edit` renames a role swatch, the role stays with it under
the new name. When it turns Global off, the role moves to a new swatch
name that the next Make … Line makes. When `swatch.merge` merges a role
swatch into a global swatch that carries no role, the kept swatch takes
the role.

Docs: docs/mcp.md (Packaging Tools add-on) and ROADMAP.
2026-11-14 15:25:30 -08:00
BFlat dafd993395 Merge pull request #7658 from dotCooCoo/feat/svg-filter-defaults
Effects: Effect › SVG Filters lists default filters
2026-11-15 06:18:12 +07:00
BFlat ada5c74c47 Merge pull request #7203 from dotCooCoo/fix/file-folder-param-classification
Automation: one classification of file and folder params
2026-11-15 05:30:12 +07:00
dotCooCoo 0b1e1e99a1 Effects: Effect › SVG Filters lists default filters
Effect › SVG Filters and Apply SVG Filter list 14 default filters in
every document, before the document's own. The set, the names and the
values are VectorCraft's own, written with SVG 1.1 filter primitives
(crates/effects/src/svg_filter/defaults.rs).

A document holds none of the defaults until one is applied or edited
there. svgFilter.apply with a default's name copies it into the document
in the same undo step, and svgFilter.define with replace naming a default
adds the edited copy under that name. The copy is listed in the default's
place. svgFilter.delete refuses a default the document holds no copy of,
and deleting the copy lists the default again.

svgFilter.list also returns the defaults. svgFilter.apply takes index and
item to put the filter in the place of an applied SVG filter, which the
dialog's OK uses when it is opened for an applied effect; an index that
is not an applied SVG filter, null included, is an error.
2026-11-14 11:19:22 -08:00
dotCooCoo a234216ea3 Cutting Tools: Nest Shapes packs the selected objects onto a sheet or roll
Object › Plug-ins › Cutting Tools › Nest Shapes… (`addon.cutting.nest`)
moves the selected objects close together onto a sheet or a roll of
material. The sheet starts at an artboard's top-left corner and is the
artboard's size or a set width and height; a roll is a set width with
no end. A margin (18 pt by default) is kept inside the sheet's edges and
a spacing (9 pt) between objects.

Objects are packed by their bounding boxes, with their strokes and
effects (the reach of shadows, glows and blurs included) or by their
geometry: the tallest first, each where its bottom edge is highest and
then furthest left. With Rotate, an object may turn 90° clockwise where
that puts its bottom edge higher or where only the turned object fits;
a turned object is measured after the turn. A path of a pixel-aligned
compound path is not turned. Objects that do not fit go in a column to
the right of the sheet, in stacking order. Objects on the pixel grid
move by whole points and take 1 pt more room, so they stay on the grid
and keep the margin and spacing. A path of a compound path selected on
its own moves alone. Objects without bounds, such as an empty group,
are not moved and are listed in the result.

The command is one undo step, and its result gives the objects placed,
put aside, turned and skipped and the length of material used. The
dialog has Preview.

The new Nest Shapes and Roll catalog rows are in every catalog.

Docs: docs/mcp.md (Cutting Tools add-on), docs/target-app-parity.md and
ROADMAP.
2026-11-13 18:40:14 -08:00
dotCooCoo c1572562de Merge main into fix/file-folder-param-classification 2026-11-13 15:55:47 -08:00
dotCooCoo af48843ff8 Tests: Image Trace's top-level paths key names a file
The location sweep listed imageTrace.make's `paths` as a document part
at the top of its params, so catalog_path_keys_match_location_policy
failed: Image Trace's path fidelity `paths` is exempt only inside its
tracing settings, and a top-level `paths` names a file, as it already
does for imageTrace.makeAndExpand.
2026-11-13 15:31:05 -08:00
BFlat df581b2521 Merge pull request #7282 from dotCooCoo/feat/banner-hems-grommets
Cutting Tools: Banner Hems and Grommets marks a banner's hems and grommet holes
2026-11-14 05:41:10 +07:00
BFlat d15a725626 Merge pull request #7216 from dotCooCoo/feat/trim-at-crossings
Path Precision Tools: Trim at Crossings removes the stretch of a path between crossings
2026-11-14 04:30:27 +07:00
dotCooCoo 947a8ef181 Merge main into fix/file-folder-param-classification 2026-11-13 13:20:25 -08:00
dotCooCoo 1eaf421e69 Cutting Tools: Banner Hems and Grommets marks a banner's hems and grommet holes
Object › Plug-ins › Cutting Tools › Banner Hems and Grommets…
(`addon.cutting.banner`) marks where a printed banner is hemmed and where
its grommets go. The banner is the bounds of the selected art, or each
artboard when nothing is selected. On each chosen side the command adds a
hem line a set depth inside the edge (1 in by default) and grommet marks a
set inset inside it (0.5 in): one at each end of the side and the rest
spread evenly, as few as keep them at most a set spacing apart (24 in). A
corner that two chosen sides share gets one grommet. Each grommet mark is a
circle (27 pt by default) with a cross through its center. The marks are
stroked in a chosen swatch ([Registration] by default) with no fill, in one
group named Banner Marks per banner on top of the current layer, selected,
as one undo step. While a clip group is edited in isolation, the group goes
outside the outermost clip group, as Weed Box and Lines does.

The command refuses every side off, no hem and no grommets, and bad params
with a message. It also refuses a hem or inset that reaches the far edge of
the banner when one of two opposite sides is chosen, or that meets the marks
of the opposite side when both are chosen, an inset of more than half a
chosen side's length, and more than 100000 grommets. The dialog has Preview.

The grommets' distance from the edge is `grommetInset`, so the dialog shows
it as Grommet Inset with its own catalog rows. The new Diameter catalog
rows also translate the Diameter field of the `shape.flare` command dialog,
which had no rows.

Docs: docs/mcp.md (Cutting Tools add-on), docs/target-app-parity.md and
ROADMAP.
2026-11-13 12:49:43 -08:00
dotCooCoo ba2531bc3f Tests: engine tests remove the temp folders they make
vectorcraft_testkit::temp_dir returns a bare path, so every engine test
that wrote into one left the folder in the system temporary folder.

- testkit: TempDir, a test's own folder made through temp_dir (same
  private creation and ownership checks) under a tag no other TempDir in
  the process uses, removed with its contents when dropped, also when
  the test panics.
- Engine unit and integration tests hold a TempDir for the whole test
  instead of calling temp_dir: graph, fileio, compare, journal, library,
  shortcut set, spelling, store, web export, cancel, containers, build,
  color settings, command sweep, font folder, removed font, model-based
  and the font search fuzz.
- The DCS and swatch library tests' own helpers and the PDF editing
  tests' shared vc-pdfedit-<pid> folder use a TempDir per test too.
- The font and link file search, store, color settings and font folder
  helpers no longer delete the private folder temp_dir checked and make
  it again with default permissions.
2026-11-13 09:33:36 -08:00
dotCooCoo 3a336fd32f Path Precision Tools: Trim at Crossings removes the stretch of a path between crossings
The new Trim at Crossings Tool removes stretches of paths between the
places where they are crossed by another path or by themselves. A click
removes the stretch under the pointer, a drag removes every stretch its
rectangle touches, and an Alt-drag removes every stretch its freehand
line crosses. It works on every path that can be edited, selected or
not, and each gesture is one undo step.

- `addon.pathtools.trim {at, tolerance?}`, `{rect}` or `{points}` is the
  command behind the tool. A closed path that loses a stretch becomes
  open, an open path that loses a middle stretch becomes two paths with
  its appearance in its place in the stacking order, and a path that
  nothing crosses is removed whole. The stretches that stay get no new
  anchors.
- Hidden and locked paths, guides and clipping paths are not trimmed and
  do not count as crossing. Only the paths the gesture reaches are
  searched for crossings, and one work limit covers every path the
  command trims.
- `crossings_on` and `crossings_on_within` in `vectorcraft-pathops` find
  the crossings on one path and compare it only with the segments in
  its box.
- The new tool shares the crossing search with Add Points at Crossings
  and Split at Crossings, so those change too: two segments of a path
  that meet at an anchor, directly or across segments with no length,
  now count as crossing where they cross again away from that anchor,
  and do not count as crossing at the anchor itself. With Self
  Crossings, a curved segment that loops over itself counts as crossing
  itself. Before, both crossings were missed.
- The tool is an add-on tool: Object › Plug-ins › Path Precision Tools
  and the All Tools drawer list it, it has no shortcut, and neither
  shipped toolbar shows it.

Docs: docs/mcp.md, docs/ui-parity.md, docs/target-app-parity.md.
2026-11-13 09:24:53 -08:00
dotCooCoo 5e19c59f33 Automation: one classification of file and folder params
A param key names a file or a folder by a reviewed list of whole names,
read in the context of the command it is for (ParamsPlace): the
plug-in call check, the control server's reply hiding and recorded-step
filtering, and the sweeps' temp-folder redirection all use it.

- `url` (a web link) and `folders` (an export's grouping) no longer
  count as files or folders, and keys that only end like one
  (alignToPath, wholePaths, sortPaths, linksFolder and others) are no
  longer path params in control replies or recorded steps.
- `dir`, `directory` and the folder preferences that prefs.set takes in
  `values` (fontsFolder, pluginsFolder, recoveryFolder,
  templatesFolder) are folders everywhere, so a relative path under one
  outside the read root is taken out of a recorded step.
- A `command.batch` step, an `engine.execute` request and a recorded
  step keep their own command's exceptions below the top level, so the
  sweeps no longer replace a nested web link or export grouping.
- A new test sorts every catalog key that reads like a file or folder
  key into the reviewed lists and checks every classifier against them.
2026-11-13 09:14:58 -08:00
BFlat 6a695a01ec Merge pull request #6847 from dotCooCoo/feat/weed-box-and-lines
Cutting Tools: Weed Box and Lines adds a weed box and weeding lines around art
2026-11-12 23:54:01 +07:00
dotCooCoo bf9baa0b85 Plug-ins: diffPath is a file key and Slice Options' url is not; the command sweep uses these keys
The sweeps in command_sweep.rs kept their own list of file and folder
keys (path, diffPath, folder, destinationFolder) in testkit's
safe_value and again in the temp-folder test, so a command whose file
key was not on the list was sent raw junk strings, and a key written as
`{path | name ...}` (document.open) was never swept.

- The engine exports the plug-in call rules' file keys as
  `cmd::key_location`, `cmd::location_in` and `cmd::location_keys`,
  which read every key a params description names, the keys of the
  commands its `...` entries name, and the schema. `diffPath` is a file
  key, so a plug-in call that carries it is refused; Slice Options'
  `url` and Export for Screens' `folders` name part of the document, so
  a call to object.slice.options with a top-level `url` is accepted.
- testkit's `param_keys` reads the keys the engine reads, and
  `junk_params_for_command` and `safe_value_for_command` send every
  string under a file or folder key, in arrays and in objects inside
  them, as a location in the sweep's temp folder. Each such key also
  gets a list of paths and a list of `{ids, path}` objects.
- Every catalog sweep, the serializability sweep included, uses them,
  and the temp-folder test checks every key the catalog names, at any
  depth.
2026-11-12 06:36:56 -08:00
dotCooCoo dc86048bb6 Merge main into feat/weed-box-and-lines 2026-11-12 05:59:30 -08:00
BFlat 4306a1d1fb Merge pull request #6808 from dotCooCoo/feat/stencil-bridges
Cutting Tools: Stencil Bridges keeps the islands of a stencil attached
2026-11-12 18:19:57 +07:00
dotCooCoo ec36ccd076 Cutting Tools: Weed Box and Lines adds a weed box and weeding lines around art
A Cutting Tools add-on command (Object › Plug-ins › Cutting Tools › Weed Box
and Lines…, `addon.cutting.weed`) for vinyl cutting: around the selected art
it adds a weed box, a rectangle at a margin outside the art's bounds, and
weeding lines across the box, horizontal, vertical or both, by count or by
spacing. Each line runs from one side of the box to the other and is left out
over the art and within a gap of its outlines, so it stops at the art and the
waste lifts off in pieces. The lines and the box are straight paths stroked
in a chosen color swatch ([Registration] by default) with no fill, in one
group named Weeding on top of the current layer, selected, as one undo step.
While a clip group, or a group inside one, is edited in isolation, the
group goes on top of the container that holds the outermost clip group
around it.

The art is measured by the outlines a cutter cuts: closed paths by their fill
rule (the hole of an even-odd compound path gets lines too), open paths as
lines, type by its glyph outlines, images by their frames, placed files by
the art they show (by their boxes when the file can't be read), symbol
instances by their art, and blends and other live objects by the art they
draw. A clip group, and an object selected inside one, is measured by what
shows inside the region its clipping paths clip to, and a clipping path
selected on its own as its clip group. Art in a hidden group or layer is
left out. The command refuses an empty selection, art with no outlines, bad
params, and art or lines too complex to measure, with a message.

The dialog has Preview; a Spacing above 0 is used instead of the Count.

Docs: docs/mcp.md (Cutting Tools add-on) and docs/target-app-parity.md.
2026-11-11 22:59:52 -08:00
dotCooCoo 2a494dec50 Cutting Tools: Stencil Bridges keeps the islands of a stencil attached
Object › Plug-ins › Cutting Tools › Stencil Bridges… (`addon.cutting.bridges`)
cuts strips of a set width out of the selected art so that a stencil cut
from it holds together: every island (the inside of an O, A or 8, a hole in
a shape) stays joined to the sheet, directly or through another island.
Bridges take the shortest crossings that fit first, then spread around each
island up to the count asked for, at least two widths apart. They run
vertically, horizontally or along the shortest crossing among 12
directions 15° apart.

- The art is measured by the area its outlines enclose, whatever their
  paint, with hidden objects left out; type by its glyph outlines, without
  converting the type. The result is one compound path with the strips cut
  out, painted as the topmost selected shape with outlines, in the place of
  the topmost selected object with outlines. Selected objects with no
  outlines in the art stay where they are.
- Keep Original (on by default) moves the selected objects that make up the
  art to a new hidden layer, Stencil Original; off replaces them.
- Art with no islands, or none a bridge of the width fits, is left as it is
  with a message and no undo step. Islands the cut result still encloses
  are counted in `unbridged`, with a message. Otherwise the run is one undo
  step.
- Curves are followed within a twentieth of the width (0.002 to 0.25 pt).
  Art that reaches more than 10000000 pt from the origin or has more than
  200000 anchors is refused before it is combined. Art is also refused when
  its combined area has more than 4000 outlines, when its outlines need
  more than 200000 straight segments, or when placing the outlines or
  joining every island takes more work than a fixed budget allows; when
  the budget runs out while extra bridges are added, the bridges found so
  far are kept.

Tests in vectorcraft-pathops, vectorcraft-engine and vectorcraft-ui-egui,
command_sweep cases, catalog rows in all 27 languages, docs/mcp.md, the
evidence list in docs/target-app-parity.md and the ROADMAP progress log.
2026-11-11 22:17:43 -08:00
dotCooCoo f82a31045c Blend: the Blend panel's Create Spine menu sets whether new blends get a spine
The Blend panel gets a Create Spine menu (Auto, Always, Never) under Make,
and object.blend.createSpine {mode?} sets or reads it. It is kept with the
preferences, is not an undo step and leaves blends already made as they are.
object.blend.make takes createSpine to choose for one new blend.

Auto and Always give every new blend a straight spine, as before. Never
makes a blend without one: its steps sit where a straight spine puts them,
object.blend.info reports hasSpine: false, easing is refused and dimmed,
Reverse Spine and the spine point commands refuse it, Release gives back
no spine path, and Replace Spine gives it a spine. A blend taking more keys
keeps whether it has a spine. Native files save noSpine; older files open
with their spines.

Builds on #5177 by adambelis.
2026-11-11 21:11:12 -08:00
dotCooCoo 2b378689d1 Tests: the command sweep sends file and folder params only into its temp folder
The tool-edit sweep sent `{"<key>": "on"}` for every documented key, so
`prefs.export` wrote a preferences file named `on` into crates/engine on
every run, and `folder`, `destinationFolder` and `diffPath` strings from
`junk_params` named locations under the working directory.

- `is_path_key` covers `path`, `diffPath`, `folder` and
  `destinationFolder`; `safe_value` sends a temp file for a file key and
  a temp folder for a folder key, and both sweeps use it.
- A new test builds both sweeps' cases for every command and fails when
  a string under one of those keys is outside the temp folder, without
  running any command.
2026-11-11 02:38:07 -08:00
dotCooCoo d5fc96327e Merge main into fix/shape-builder-merge-off-ui-thread
# Conflicts:
#	crates/engine/src/lib.rs
#	crates/engine/src/session/documents.rs
2026-11-08 11:33:51 -08:00
dotCooCoo fd3482c272 Merge main into fix/shape-builder-merge-off-ui-thread 2026-11-08 11:28:00 -08:00
ruchirguitar b1f52d1369 Select Text by Font: limit it to artboards or layers (#5529)
Squashed from #5578 onto main.
2026-11-09 02:03:01 +07:00
dotCooCoo cca9a42c6c Effects: Effect › SVG Filters applies the document's SVG filters as live effects
Squashed from #6200 onto main.
2026-11-09 00:34:23 +07:00
dotCooCoo b7203714be Links: Relink can replace all instances, the folder's missing links or each link separately
The Links panel's Relink... button and menu item open a Relink dialog
(ui.relinkDialog) with a Replace menu. Selected Instances relinks the
selected images and placed documents, as Relink did before. All
Instances also relinks every other object in the layers linked to the
same file. Missing Links from This Folder relinks the selection to the
chosen file, then every other missing link to the file of its name in
that file's folder, and the status bar names the files not there. Each
Link Separately asks for a file for each selected link in turn, one OK
each, and relinks them all at the last one: the dialog has one row per
linked file, and each selected embedded image gets a row of its own.
Every choice is one undo step.

links.relink takes scope: selected (default), all, missingInFolder
(with path) or each (with paths: [{ids, path}] in place of ids, path
and folder). A scope or paths that doesn't fit is an error and relinks
nothing. With copy, every file is read and checked before any is
copied, copies made before a failed copy are removed, and
missingInFolder looks for missing images only.

Docs: params text, docs/mcp.md, docs/control-protocol.md,
docs/target-app-parity.md. Catalog rows for the new labels and messages
in every catalog.
2026-11-08 13:21:01 +07:00
dotCooCoo 0ce3147aab History: the New Document button makes a document from the selected state
The History panel gets a New Document from State button at its bottom,
which runs the new edit.newDocumentFromState command. The command makes
a new document holding the art of a History panel row ({index?}, the
current state when omitted) and makes it the active document. An index
that names no state is an error and changes nothing.

The new document takes the next Untitled-N name, is marked unsaved, has
nothing selected, no steps to undo or redo and no modified date, and
leaves symbol, opacity-mask and pattern editing; the art drawn in a
pattern's tile is stored in the pattern, as Done stores it. Its links point at the files the
source finds, including files found in the source's folder away from the
links' paths. Those files are looked for only within the folders the
asking caller may read; for a caller without limits, within the folders
the caller that opened the source may read. The source
document, its steps and its saved state stay as they are; typing or a
drag in progress is first kept as a step, as Undo keeps it. While an IME
composes, the command waits, as Undo does.

Docs: docs/mcp.md, docs/target-app-parity.md.
2026-11-08 12:20:59 +07:00
ruchirguitarandClaude Opus 5.5 7dc66d660a Fix #5526: select images by link status
Selection Tools add-on: addon.select.byLinkStatus selects the image
objects and placed documents whose link is linked, embedded, missing or
modified (one status or several), as links.list reports it. Optional ids
limit the search, add adds to the selection, and zoom runs the existing
Zoom to Selection in the desktop app. Objects that are hidden, locked, on
a template layer or outside the isolated group are left out and returned
with the reason. Only the selection changes.

Select Linked / Embedded / Missing / Modified are in Object > Plug-ins >
Selection Tools and the Links panel menu. Each is off when no image has
that status, and Shift adds to the selection. Select by Link Status...
lists the images with name, status and format, with a name search, a
status filter, checkboxes with All / None and Zoom to Selection. The
status bar says what was selected and how many were left out, with
plural rows in every catalog.

Tests: engine (statuses, ids, add, zoom, skip reasons, bad params),
command sweep, and UI (message, list filtering, menu items, Links panel
menu, headless dialog frame). Docs: mcp, target-app-parity, ui-parity,
roadmap.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-05 14:12:10 +07:00
ruchirguitarandClaude Opus 5.5 e0645341a4 Document tabs: drag a tab along the strip to reorder the open documents (#5663)
A document tab dragged sideways along the tab strip moves its document to the
place an insertion line marks; the current document stays current. Dragged
above or below the strip, the tab still tears off into a floating window. The
views Window > New Window opened move with their document, and each document
keeps its own zoom, centre and artboard.

The move is the engine command `document.move {from?, to}`, so the control
channel, MCP and recordings reach it, and a replay moves the document before
the steps recorded after it. `sync_views` keeps the views with their documents
by uid when the documents change order.

Behaviour: https://helpx.adobe.com/illustrator/using/customizing-workspace.html

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-05 12:02:46 +07:00
ruchirguitarandClaude Opus 5.5 528faa8e0a Fix #5532: Release Type on a Path splits type on a path into point type and its path
A Type Tools add-on command (Object › Plug-ins › Type Tools › Release Type on a
Path…, `addon.type.releasePath`): each selected type on a path becomes point
type with the same runs, character and paragraph attributes, on one straight
line whose baseline starts where its first character sat, and the plain path
it was set on, with its exact shape and transform, in its layer and stacking
place, with no fill or stroke. `mode` keeps both, the path only or the text
only; `keepOriginal` leaves the type on a path and adds the released objects
above it. Other objects are left alone, nothing to release makes no undo step,
the run is one undo step and the released objects are selected. The command
dialog previews it as Type on a Path Options does (#5360): Cancel leaves no
history, OK is one step. Tests, command_sweep cases, catalog rows in all 26
languages, docs/mcp.md and the parity docs (beyond Illustrator: scores
unchanged).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-05 11:17:09 +07:00
Don Omondi 62c6d42dff Set Corners: round only the corners in an angle range (#5545)
Squashed from #5737 onto main.
2026-11-05 11:04:52 +07:00
Don Omondi 7aa759d4de Set Corners: round all, odd-numbered or even-numbered anchors (#5546)
addon.pathtools.cornerSet takes `every` ("all", "odd" or "even"; default
"all"), which keeps, of the anchors already chosen (named, direct-selected
or all), only the odd- or even-numbered ones, counted along each path from
its first anchor as number 1. Anchors that take no corner still count, so
the pattern follows the path's anchor order on open and closed paths; when
nothing is left the command says so. Unknown values are refused.

Object › Plug-ins › Path Precision Tools › Set Corners… (also a button in
the Anchor Inspector's Corners section) opens a dialog with Radius, Corner
kind and Anchors (All / Odd-Numbered / Even-Numbered) that previews on the
canvas and commits as one undo step.
2026-11-05 10:42:37 +07:00
ruchirguitarandClaude Opus 5.5 7e016a0bcc Select by Artboards: select objects overlapping, inside or outside several artboards (#5525)
addon.select.byArtboards {artboards, relation} in a new Selection Tools
add-on. Overlapping is All on Active Artboard's test, now one shared
helper (select::on_artboard); Fully inside is within one artboard, edges
included; Fully outside is on none. Objects are those Select All takes.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 22:57:57 +07:00
ruchirguitarandClaude Opus 5.5 8850b923ce Fix #4924: Text Tweaker ramps or randomises one character attribute letter by letter
A built-in Type Tools add-on (Object › Plug-ins › Type Tools › Text Tweaker…,
`addon.type.textTweaker`): size, baseline shift, rotation, horizontal or vertical
scale, tracking, leading or stroke weight go from a start value to an end value
along a straight ramp, an ease, a bow, a spike or at random with a seed, set as
the Character panel sets them, while the text stays live. One undo step, a
dialog with Preview, catalog rows in all 26 languages, docs/mcp.md and the
parity docs.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 20:07:58 +07:00
FarmerGeorg 9c59a4dcb4 Appearance panel: UI parity for row editing
- Drag strokes, fills, characters and effects to move them, or drop them
  on the Duplicate or Delete button
- Select several rows with Shift/Cmd-click and move them as one block
- Delete and Backspace remove the highlighted rows, not the selected art
- Row links open their panel (Stroke, Character…) as a flyout
- Stroke weight spinner follows Units > Stroke
- Transparency panel edits the active fill's or stroke's opacity
2026-11-02 14:36:09 +07:00
dotCooCoo e8e09af782 Brushes: Calligraphic and Scatter values follow pen tilt, bearing and rotation
Squashed from #5031 onto main.
2026-11-02 14:33:02 +07:00
dotCooCoo 05ac9ce040 Merge main into fix/shape-builder-merge-off-ui-thread 2026-11-01 22:20:23 -08:00
bflatastic a76d9215da Fix #4923: Find Nearest Swatch matches colours to a library's swatches
Object > Plug-ins > Color Effects > Find Nearest Swatch... picks a
library (the document's swatches, a built-in library, or a library or
colour book the user saved or loaded) and Fill and Stroke, and lists
each colour of the selection with its three closest swatches and their
CIEDE2000 difference. Apply gives each colour its nearest swatch as one
undo step.

- addon.color.nearestSwatch (a query): the closest swatches of a
  library to each colour of the selection's fills and strokes (solid
  colours and gradient stops, inside groups and type), or to a colour
  given, with deltaE; count 1..50.
- addon.color.applyNearestSwatch: recolours those paints (and gradient
  meshes) to their nearest swatch; global and spot swatches link, and a
  library's swatches the colours take are added to the document first
  (as swatch.library.add adds them), so a spot colour stays spot.
- The library picker Image Trace's Document Library uses moves to the
  Swatches panel module and is shared.
- No colour book data ships: only libraries VectorCraft computes or the
  user loads are searched.
2026-11-01 11:09:11 +07:00
bflatastic 84336967aa Fix #4922: Expand Dashes into Paths 2026-11-01 09:08:07 +07:00
bflatastic cd277d5d84 Fix #4917: Sort Objects sorts the selection by one attribute and applies that order to another
Squashed from #5017 onto main.
2026-11-01 08:11:17 +07:00
bflatastic ef80709e16 Fix #4925: Randomize Opacity gives each selected object a random opacity in a range 2026-11-01 08:07:33 +07:00
bflatastic 7d8f1d4e06 Fix #4978: Area Type Options › Text Flow by rows or by columns 2026-11-01 06:11:11 +07:00
bflatastic 68391bdde4 Fix #4926: New Symbols from Layers 2026-11-01 02:44:16 +07:00
bflatastic 916b60898a Fix #4927: Save a Timestamped Copy 2026-11-01 02:44:16 +07:00
bflatastic 9e3f8dccec Fix #4950: Path Precision Tools: Divide into Dashes
addon.pathtools.divideDashes cuts the selected paths (or only their
direct-selected segments) into separate open paths of a dash length
measured along the curve, with an optional gap (gap pieces dropped
unless removeGaps is false) and Fit to Corners and Ends; pieces keep
the path's appearance, one undo step, at most 100000 pieces. Geometry
in vectorcraft-pathops; dialog with unit fields and Preview; tests,
sweep cases, catalog rows and docs.
2026-11-01 02:44:16 +07:00