With a Constrain Angle other than 0° or a whole turn, an arc dragged out
with the Arc tool or placed from the Arc Segment Tool Options click dialog
is drawn along the turned x and y axes, with its bounding box turned. The
drag's box and Shift's equal lengths are measured along those axes, the
reference point stays at the drag's corner or the click, and F, C and
Up/Down keep the turn. At 0° and whole turns arcs are drawn as before.
shape.arc takes an optional rotation (degrees clockwise, about x1, y1 or
about the reference point x, y); a rotation that is not a number is an
error and adds nothing.
Each piece of a long drag's line also held the first segment of the next
piece, so that segment was drawn twice, once by each piece. Where the
line is thin or partly covered at its edges, the doubled coverage drew a
darker stretch every 64 segments. A piece now ends halfway along the
segment after its last point, and the next piece starts there, so a wide
line still turns at the piece's last point as one line does.
The line that a round Eraser, the Knife, the Path Eraser, the Pencil with
Live preview off or a smoothing drag shows was one path of every point,
copied, flattened and tessellated again each frame, and with the
Eraser's Size following the pen each step was a new path each frame.
- A drag of more than 64 segments now shows in pieces of 64 segments,
each also holding the next piece's first segment so wide lines join
as one. Pieces the drag has passed come back as the same shared path,
and the canvas reuses their triangles while the view stays the same;
only the last piece is built again, and only when it changed.
- With Size following the pen, each step is kept as its own shared path
and only a new or moved step is built.
- The Knife's pieces carry where the dash pattern starts, so the dashes
run on across pieces (Overlay::SharedPath gains `dash`).
- The smoothing band is shared until it changes.
The canvas still copies the kept triangles into each frame. Release
commands (path.eraseRegion, path.knife, path.eraseSegments,
path.freehand) are unchanged.
With Alt held at the press, an Eraser drag draws a marquee from the press
point to the pointer instead of a stroke, and the release erases everything
inside it. Alt+Shift keeps the marquee square on its larger side, Escape
cancels it, and a click or a drag along one axis erases nothing.
path.eraseRegion takes {rect: [x, y, width, height]} in place of points.
Closed paths lose the rectangle's area; open paths are cut where they cross
its edges, found from the exact crossings, so a narrow rectangle across a
long segment still cuts it. A width or height of 0 or less, a non-finite
value, or points and rect together is an error, and nothing erased adds no
undo step.
Docs: docs/mcp.md, docs/ui-parity.md.
A step took the tip halfway between the tips at its ends, turned the
shorter way round. The release reads the pen's pressure and tilt halfway
along the step, and its bearing and rotation halfway the shorter way
round, so a step from no pressure to full pressure with the angle on
Pressure by 90° erases with a level tip there while the outline showed
it upright. Each step now takes the tip of the pen's readings halfway
along it.
The release reads the bearing of the first point the pen leaned 1° or
more at for the points before it, while the outline kept the set value
there. The outline now takes that bearing too, and starts again when the
first lean arrives, also when a pen tilted in place at the last point
gives it.
With Shift held, an Eraser drag stays on the line from the press point at
the 45 degree step from the Constrain Angle that the pointer lies nearest
to. The step is taken once the pointer is 3 screen pixels from the press
and holds until Shift is released; the tip outline follows the line.
Released, the drag goes on freehand from the last point on the line, and
Shift again takes a new step from the press point.
Once the pen pressed less than fully, the steps of the outline already
built kept the tip of a stroke without pressure, while the release reads
full pressure at those points. The outline now starts again when the
pressure first counts.
A Tilt, Bearing or Rotation mode set during the drag gave the early
points the pose of later ones. The release reads no poses for such a
stroke, so the outline now keeps the set values for them too, and the
same for a Pressure mode set during the drag.
The outline of the area an Eraser drag covers used the set Angle and
Roundness and varied the Size only with Pressure, while the release
(since #7726) erases with the tip the pen gives at each point on the
Pressure, Tilt, Bearing and Rotation modes.
Each step now takes the tip halfway between those at its ends, read as
the release reads the stroke. A step whose angle or roundness varies is
outlined where its own tip is round, and the parts inside other steps'
areas are removed as before. A pen turned in place gives the last step
the new tip, and a changed mode or Variation starts the outline again.
A round tip whose Size follows the pen shows each step that wide.
Random shows the value itself until the release draws it.
While the Smooth tool is in use with a path it can smooth selected, the
bar shows the tool's Fidelity field and Tool Options..., which opens the
Smooth tool's options. The field sets Fidelity through tool.setOption
with the same range, unit and steps as the field in the options dialog.
With nothing smoothable selected, the tool shows no bar. The bar leaves
out the selection tools' actions and the Fill, Stroke, Recolor Artwork
and Lock controls. On a canvas too narrow for the field, More Options
lists Fidelity, which opens the tool's options.
The Smooth tool's cursor and the bar share one check of the selection,
which the bar keeps for the document's revision.
A drag or release within a pixel of the last stroke point now gives
that point the pen's tilt and rotation, so the outline and the erased
area follow a pen turned or tilted in place. A release without a pen
reading keeps the last pose. The outline's size on Pressure, Tilt,
Bearing or Rotation goes past 1296 pt, as path.eraseRegion sweeps it.
Eraser Tool Options gives Angle, Roundness and Size each a variation menu
(Fixed, Random, Pressure, Tilt, Bearing, Rotation) and a Variation field.
path.eraseRegion takes angleMode, roundnessMode and sizeMode with their
variations, sweeps a varying tip as a Calligraphic nib with what the pen
read along the drag, and refuses an unknown mode or a variation out of
range. The Eraser records the pen's pressure, tilt and rotation when a
mode follows them, and its tip outline at the pointer takes the angle,
roundness and size the pen gives while it erases.
The outline a Blob Brush or Eraser drag shows was copied, flattened and
tessellated again every frame, settled parts included, so the per-frame
cost of a long stroke grew with its whole length.
- The settled outline blocks are kept as shared paths and returned as a
new Overlay::SharedPath; a block gets a new path only when it is
joined again.
- The canvas keeps the mesh each shared path was drawn with, by the
path's allocation and for the view, clip and stroke it was built for.
A frame with the same path and view draws the kept mesh; a pan, zoom
or rotation builds it once more. Lines outside the canvas get no
triangles. A frame keeps only the meshes it draws.
egui still copies each kept mesh into the frame's mesh on every repaint.
The release sends the same path.blob and path.eraseRegion command as
before. The round Eraser tip's line is unchanged.
The Pencil's and the Paintbrush's new-path, continue, close and straight-line
cursors are drawn on the crosshair already; Precise Cursors no longer turns
them into the plain crosshair, so the badge still says what the press or the
release does.
The continuation cursor (a short rising line) shows over an open end of a
selected path before any press, freehand too, and while a continuing stroke
nears an open end of another selected path it connects to. The straight-line
cursor becomes a short level line. A stroke continuing a path, a straight line
too, shows the closing ring within Close Paths When Ends Are Within of the
path's other end, and the release closes it; path.freehand takes the tool's
closed for extend instead of its own four-Fidelity distance.
With the Live Paint Bucket, a double-click on a face fills it and every
face reached across edges that are hidden or draw no stroke; a stroked
edge, a hidden face and a Gap Detection gap stop it. On an edge, a
double-click paints the edges joined to it end to end with the same
stroke paint. A triple-click fills every face of the group with the
clicked face's fill, or paints every edge with the clicked edge's
stroke. Shift and the Paint Fills and Paint Strokes options choose a
face or an edge as for a click; Alt held paints nothing.
- livePaint.fill and livePaint.strokeEdge take scope ("one", the
default, "connected" or "samePaint") and match, the paint compared,
and reply with count. A bad scope or match is an error, and scope
with a drag's points is refused.
- Each click of a double-click or triple-click paints as it arrives,
as its own undo step. For a triple-click, and for a double-click on
an edge, the tool sends as match the paint the face or edge had
before the first of those clicks, including a first click that makes
the Live Paint group from the selected paths. A double-click on a
face sends no match.
- PointerKind::TripleClick is new: the canvas sends it on egui's
triple-click unless a modal dialog is open, as for a double-click,
and ui.pointer and pointer_gesture take "tripleclick".
Docs: docs/mcp.md, docs/control-protocol.md, docs/target-app-parity.md.
The Smooth tool showed its own cursor with nothing selected, though a
drag then changes nothing. It now shows Not Allowed until a path it can
act on is selected (an editable path, not a guide, with three or more
anchors on one of its subpaths); a selected path anywhere on the canvas
gives the Smooth cursor wherever the pointer is.
- The Pencil with Alt key toggles to Smooth Tool on and the Blob Brush
show Not Allowed the same way when Alt gives them the Smooth tool. The
Paintbrush keeps its closing cursor, since its release with Alt closes
the stroke.
- A Smooth release, from the Smooth tool or from the Pencil, Paintbrush
or Blob Brush with Alt, sends path.smoothRegion only while such a path
is selected. With only type or other objects selected it sends no
command.
- Use Precise Cursors leaves Not Allowed as it is.
- The cursor catalog and docs/target-app-parity.md describe the rule.
The outline of the area a Blob Brush or Eraser drag covers was outlined
again for the whole stroke on every frame, so a long stroke slowed the
canvas as it grew.
- The drag is outlined in pieces of up to 32 segments (one segment each
with Size set to Pressure), and a frame outlines again only the pieces
it added segments to. A grid of squares lists the segments near each
square, and each piece's outline drops the parts inside the rest of
the area, so the pieces show as one edge.
- One frame takes at most 256 new points and a fixed amount of work;
Tool::overlays_pending makes the canvas draw again until the rest is
done with the pointer still. Points not outlined yet show as a thin
line, and the tip shows at the pointer.
- The settled outline is kept in joined paths of 64 pieces, and a frame
joins again only the paths that changed. The grid's size is capped.
- The Blob Brush's length label and the Size-by-pressure check keep
running values instead of rescanning the stroke each frame. With Size
set to Pressure the outline shows only the edge of the whole area.
The release sends the same path.blob and path.eraseRegion parameters.