Look::takes let a glyph filled only join a run whose glyphs were also
stroked, so after mode 2 text a mode 0 glyph took the run's stroke:
`2 Tr (B) Tj 0 Tr (C) Tj` came in as "BC" stroked throughout. A glyph
now joins only a run drawn alike (fill, stroke, overprints), so a glyph
filled only starts a run of its own and takes a stroke only when the
matched-stroke path (#8039) strokes it.
flush_stroke no longer strokes a whole run in place: a whole run goes
through the split and join code, so fill and stroke rendering glyph by
glyph still builds one stroked run.
A PDF/X-4 export wrote xmp:ModifyDate and xmp:CreateDate in its XMP
metadata but no xmp:MetadataDate. The PDF/X-4 metadata edit now adds
xmp:MetadataDate next to xmp:ModifyDate, with the same value, and grows
the stream's /Length to match. When the export dates the file as modified
later, post::modification_date already rewrites every xmp:MetadataDate,
so the two dates stay equal.
PDF/X-1a, PDF/X-3, PDF/A and plain PDF exports are unchanged.
A fill and a stroke at the same opacity below 1 were joined into one
type object whose opacity then applies to both together, losing the
darker overlap the file composites. stroke_filled now takes a stroke
only when the fill and the stroke are opaque.
An upright glyph filled and stroked was kept as an outline for the
reshaped-outline fallback while upright glyphs filled only were not;
it is no longer kept either, so such a line can't come in as the
outlines of its stroked glyphs alone.
Docs: the #8015 entries say what is left (translucent type, and a TJ
that starts a new line part way through).
A PostScript plate drew an overprinting fill, stroke or character as
nothing when it put up to half a percent of that plate's ink down, so a
faint ink was lost from the plate. Now only a paint with no ink on the
plate is drawn as nothing, on PostScript and PDF plates alike. The one
exception is a color that counts as 100% black and is not linked to a
spot swatch or Registration: on a PostScript plate, up to half a percent
of another ink in it still counts as none, so a near black set to
overprint keeps the ink below it.
Each spot ink in the Output section's Document Ink Options list now has
an icon before its name. Clicking it prints that ink as process: its art
separates onto the process plates and it gets no plate of its own, while
the other spot inks keep theirs. Clicking again keeps it as a spot ink.
While Convert All Spot Colors to Process is on, every spot ink converts
and the icons are dimmed; each ink keeps its own choice for when the
option is turned off. A converted ink's Print box, frequency and angle
are dimmed.
file.print and print.preview take convertToProcess on an output.inks
entry, and print.preview lists every document ink, converted ones
included, in documentInks.
- A PDF plate no longer drops an overprinting paint whose ink on that
plate is under half a percent: it draws with Darken. PostScript plates,
which have no blending modes, still draw such a paint as nothing.
- With Overprint Black on, the art of a symbol that type shows as an
inline graphic has its repainting instances placed too, so their own
fill and stroke changes decide whether they overprint.
- A gradient's freeform points count only when its kind is Freeform, in
the Overprint Black check and in the plate separator. A gradient of
another kind is checked by its stops.
- Characters inside opacity mask art no longer draw with Darken on
separations, as the mask art's fills and strokes already do not.
- With Overprint Black on, a symbol instance whose own fill or stroke
changes or fill stain repaint its art, or whose symbol holds such an
instance, prints as its placed art and is checked with the paints it
prints with. Placement stays within the symbol object limit and the
drawn depth limit, and skips hidden objects and template layers.
The Print dialog's General section (and the print preset editor) gets a
link button after Scale W and H. While it is on, typing either percentage
sets the other, and turning it on sets H to W. It is on for new settings,
dimmed with the fields unless Scaling is Custom or a tiling choice,
toggled with a click, Space or Enter, and screen readers hear its name
and on or off state. W and H now take 1 to 1000 %.
The link is saved as scale.linked with the other print settings, in the
document and in print presets. A scale saved without it reads as unlinked,
so earlier settings print as they did. print.setup, print.preview,
file.print and print.presets.save apply the same rules: one percentage
sets the other while linked, a different width and height without a
linked key turn the link off, and with linked: true (or linked: null over
a linked scale) they are an error.
When the import refuses a file's PDF part and its editing data can't be
read either, the error named only the PDF part. It now adds "its editing
data couldn't be read either (<why>)", as layers already do
(crates/eps/src/import.rs). The reasons come from the editing data
reader (a size limit, damaged compression) and from the private data
streams (larger than 256 MB, another filter or decode parameters,
damaged zlib data). A file without editing data, and an open with pages
picked, layers off or the editing data off, keep the PDF part's error.
Part of #4366.
The Print dialog's Output section has an Overprint Black checkbox under
Convert All Spot Colors to Process, off by default and available with
Separations (print.setup output.overprintBlack, kept with the document
and in print presets). With it on, solid 100% process K or 100% gray
fills, strokes and characters, and gradients whose every stop (or every
freeform point) is, overprint in the printed copy, so the inks under them
stay on the other plates. Rich, RGB, Lab, spot-linked and lighter blacks
knock out. The document and its own overprint settings do not change, and
composite output ignores the option.
Plates draw an overprinting paint that puts no ink on them as nothing, so
PostScript separations keep the inks below it too. Overprinting character
fills and strokes now darken on PDF plates like fills and strokes, a type
object's own fill in a PDF is drawn with its blending mode, and Edit >
Edit Colors > Overprint Black counts a gradient with a spot-linked stop as
a spot black and a freeform gradient by its color points.
Match a stroke to a filled glyph by its whole placement (origin, size,
horizontal scale, slant and direction), not just its origin, so a stroke
drawn at another size over a filled word stays type of its own. Restyle
only the matched glyphs' text instead of the rest of their run: strokes
over neighbouring glyphs gather and restyle once, so a word filled and
stroked whole stays one run, while a stroke over one glyph of a filled
word strokes that glyph alone.
With text rendering modes 2 and 6 the reader fills every glyph of a
text-showing operator before stroking them, but the importer only joined
a stroke to the glyph filled last, so a word shown in one Tj came in as
a stroke-only Type over a fill-only one. TextLine now records the glyphs
it fills and stroke_filled matches each stroke to its filled glyph in
order, splitting a run where the stroke differs.
File Info's menu saves the fields as an XMP metadata template (into the
Metadata Templates folder next to the preferences, or any file), imports
one with a choice of three merges, lists the saved templates and opens
the folder. The import is one undo step and records nothing when no
field changes.
- file.info.saveTemplate writes the title (when it is not the
document's name), author, author title, description, keywords,
rating, copyright status, notice and URL that have a value.
- file.info.applyTemplate reads a file, a saved template or XMP text
(at most 8 MB) and merges it: replace clears the fields first, keep
takes each field the template has, append adds keywords and fills
only empty fields. apply: false returns the merged fields without
changing the document.
- file.info.templates lists the folder's .xmp files.
- A PDF or .ai also opens with the rating and author title its XMP
packet gives.
Docs: docs/mcp.md, docs/target-app-parity.md.
EMF, WMF and SVG wrote a symbol instance from its symbol's art as stored,
so live effects inside that art were missing: a square moved 100 pt by a
Transform effect stayed in place in the file while the canvas drew it
moved. Art whose own place is off the artboard was left out even when
the effect moved it onto it.
These exports now call bake_document_placing_symbols, as PDF, print, EPS
and DXF do: each instance of a symbol whose art needs baking is written
as that art placed by the instance and then baked, so an instance that
scales or turns its art does not scale what its effects do. EMF and SVG
clip 9-slice cells and WMF does not, as each places other instances. In
SVG those instances are written as groups; instances of symbols without
such effects still share one <symbol>. Preserve Editing still embeds the
document with its live effects.
WrittenLayers gains hidden_objects. SVG sets it with Hidden Layers on,
since it then writes hidden objects too, so a hidden instance is written
hidden with its effects applied. The other exporters leave it off.
An SVG instance nested in another instance's art was shared through
<use> when the def allowed its own transform, while the <use> writes
that transform after the outer instances'. A stroked symbol nested in a
scaled instance then drew its stroke at double weight. The check now
uses the transform the <use> writes.
Opening a PDF with Crop To Trim Box put each artboard 36 pt after the
one before, while the bleed boxes round the trim boxes became the
document's bleed. With a bleed over 18 pt, one page's bleed reached
into the next artboard, and a page exported with its bleed showed part
of its neighbor. The document's bleed is now read from every picked
page first, and the artboards are 36 pt apart plus that bleed on both
sides, as linked pages on their trim boxes are laid out since #7723.