Under colored lights, a solid-color Inflate surface drew each facet over
its underlay as a fill and then a same-color round seam stroke. At a
partly covered edge pixel the two coverages add up past the facet's real
coverage, so a turned Inflate's near facets bled into the facets behind
them by up to 5 levels against the same art drawn at 3x and averaged down.
- lighting::seamed_fill turns a facet that is one closed polygon with an
area and no crossing edges into one path: the facet and the outer
outline of its round seam (lighting::footprint). solid_surface fills
that path once per channel. Other facets keep a fill and a seam stroke.
The 2 pt underlay, the surface clip and the channel groups are as
before.
- three_d_light_color::turned_colored_inflate_facets_and_seams_cover_their_edges_once
checks Inflate at X 50, Y 35 in an opaque fill: at most one channel
sample more than 3 levels off, by at most 4, and no alpha off.
- docs/three-d.md (Seams) and docs/target-app-parity.md describe it.
Under a colored lightColor or a lights list, Revolve drew each face of a
solid-color or gradient surface on its own, so where two faces'
antialiased edges met, pixels inside the surface let the background
through at 1:1.
- The faces now lie over an underlay of themselves under one clip to
their outline, as colored Inflate's facets do (lighting::sealed, split
into lighting::underlay and sealed). The surface's opacity and blending
mode apply once, to the sealed surface.
- In a group, each run of one member's faces in the shared depth order
takes its own underlay; a translucent member's run keeps its opacity,
blending mode and mask on the sealed run.
- A face with a part of a mapped graphic gives its face to the underlay
and keeps the part right after it.
- Faces in a gradient with transparent stops carry its opacity mask and
are drawn as before. Revolve (Classic) is unchanged.
- The paint-copy budget counts the underlay in validation and drawing.
Docs: docs/three-d.md (Seams), docs/target-app-parity.md.
The panel's Export 3D Object button chose the objects to export in panel
code and passed their ids to assets.add3D, which on the same selection
refused every object when one had no 3D effect. Passing ids also skipped
the refusal while a part of a dynamic symbol instance's art is selected,
and a group whose 3D effect is on its fill or stroke enabled the button
and then failed.
assets.add3D without ids now leaves out the selected objects without a
3D effect it exports, a group or layer whose 3D effect is on a fill or
stroke, and an object inside another selected 3D object; a path of a
compound path counts as the compound path. Objects given in ids are
still refused. exports_three_d in vectorcraft-effects tells whether an
object has such an effect without building its meshes. The button runs
the command on the selection and is available only while a selected
object passes that check.
Effect › Pathfinder › Outline stroked each edge with the paint of the
source's top fill only. The fill's opacity, blend mode and overprint
were dropped, and a hidden top fill still colored the edges.
The edges now take the paint, opacity, blend mode and overprint of the
top fill that paints, or of the top stroke that paints when no fill
does. A hidden fill or a fill of no paint is skipped, so a painted fill
under it colors the edges. A hidden stroke or a 0 pt stroke is skipped
too, and an object with neither still gets edges with no paint.
Soft Mix, Hard Mix and Trap had the same gap: they read the top fill
even when it was hidden or had no paint. They now use the top fill that
paints, so a hidden fill adds no color to a mix, and a member whose only
fill is hidden takes no part in Trap.
With shadingColor blackOverprint every face keeps its paint and swatch
link whether preserveSpotColors is on or off, as docs/mcp.md says. The
params text of Extrude & Bevel (Classic), Revolve (Classic) and Rotate
(Classic) now says so too.
A nested reshaped instance whose baked art passes SYMBOL_ART_MAX_NODES
stays an instance, and the art baked for it now counts against the
instances after it (NESTED_DROPPED, as DROPPED_NODES does for placed
art). Before, the count went back to its value before the instance, so
many sibling instances could each bake up to the limit and be refused.
EMF, WMF and SVG wrote a symbol instance from its symbol's art as stored,
so live effects inside that art were missing: a square moved 100 pt by a
Transform effect stayed in place in the file while the canvas drew it
moved. Art whose own place is off the artboard was left out even when
the effect moved it onto it.
These exports now call bake_document_placing_symbols, as PDF, print, EPS
and DXF do: each instance of a symbol whose art needs baking is written
as that art placed by the instance and then baked, so an instance that
scales or turns its art does not scale what its effects do. EMF and SVG
clip 9-slice cells and WMF does not, as each places other instances. In
SVG those instances are written as groups; instances of symbols without
such effects still share one <symbol>. Preserve Editing still embeds the
document with its live effects.
WrittenLayers gains hidden_objects. SVG sets it with Hidden Layers on,
since it then writes hidden objects too, so a hidden instance is written
hidden with its effects applied. The other exporters leave it off.
An SVG instance nested in another instance's art was shared through
<use> when the def allowed its own transform, while the <use> writes
that transform after the outer instances'. A stroked symbol nested in a
scaled instance then drew its stroke at double weight. The check now
uses the transform the <use> writes.
An export that bakes a symbol instance with geometry effects inside the
art of another such instance counted only the symbol's art before its
effects against the 262,144 objects of nested symbol art one export
bakes. Copies the art's effects made were not counted, so the baked art
could pass the limit. The art the instance bakes to now takes the place
of the symbol's art in the count; when it does not fit, the instance
stays as it is with its effects and gives back what its art held while
it baked, as it does when reshaping it gives nothing.
Follows #7338. Under colored lights, and under the classic effects'
shading, a gradient with transparent stops is drawn opaque on each face
under one opacity mask of its transparency. A gradient without a
placement of its own fitted its colors to each face's bounds, while the
mask fitted the whole solid, so the color and transparency ramps did not
line up and the colors started over on each face. Such a gradient is now
placed once on all of the solid's faces, grown by 1 pt, before it is
split into colors and mask. Opaque gradients and placed gradients are
drawn as before.
Extrude & Bevel (Classic), Revolve (Classic) and Rotate (Classic) take
shadingColor blackOverprint. Each face keeps its paint unchanged, and a
face that darkens gets black over it, as strong as the darkening of the
shading color Black: a fill multiplied and overprinting, and a seam
stroke overprinting with Darken. The black is on the black plate in
Separations Preview and is written to PDF as overprinting fills. The
Plastic highlight is not drawn with it.
Preserve Spot Colors draws its black with the same helper, so its seam
stroke no longer multiplies the black a second time along face edges.
The dialogs list the choice, with catalog rows next to Shading Color.
Params text, docs/mcp.md, docs/three-d.md and docs/effects-parity.md
describe it.
In wireframe mode the effect draws no shadow, so the command check
builds no shadow from its solids either: with Shadows on, Rotate builds
no plane for it, and Extrude & Bevel and Inflate build each solid once.
A layer or group with a Pathfinder effect or geometry effects moves its ruler guides above the evaluated art. Its trailing guides were split off first and its guides among the art were added after them, so [guide A, art, guide B] came out as B, A. All of its direct guides are now gathered in one pass, in document order.
- The "`axes` must be [a, b, c, d] ..." refusal gets an @msg row in each of
the 24 complete-message catalogs, next to the other svg.filter rows.
- docs/mcp.md and the params text say that absent or [1, 0, 0, 1] axes are
the document's, that effect.setParams sets them back with [1, 0, 0, 1]
(the commands refuse null), and that moving, turning, scaling or skewing
the object moves `origin` and leaves `axes` as they are.
A fill or stroke of a painted clipping path whose Transform effect scales
strokes or moves patterns is now drawn through its art, as an export bakes
such a path, so a 2 pt stroke scaled to 200 % paints at 4 pt.
The HPGL writer closes the stroke pieces of a clipping path whose fill
paints, as it closes the outline of any filled path.
Extrude & Bevel (Classic), Revolve (Classic) and Rotate (Classic) take a
preserveSpotColors param and a Preserve Spot Colors checkbox on the
Lighting tab. When it is on, a fill or stroke linked to a spot or global
swatch stays linked on every face: the highlight lowers the swatch's
tint, and a face that darkens gets black over it, multiplied and
overprinting, so a spot color keeps its own plate in separations and PDF.
The checkbox is unavailable while Shading Color is Custom, and the param
does nothing then. With the option off, the faces draw as before. A
value that is not true or false is refused.
A clipping path that paints a fill or stroke kept the geometry effects of
those fills and strokes live, so a geometry effect on the clip group or on
a group around it reshaped the path first and the fill's or stroke's
effect applied after it, on the canvas and in export alike. Unpainted
clipping paths already applied them first.
The clipping path now becomes one path per fill and stroke with those
effects applied, as an unpainted one does, in a group marked as such
pieces (`NodeExtras::clip_pieces`, saved with the document). `clip_paint`
paints that group's fill pieces behind the clipped art and its stroke
pieces over it, as the path paints its fills and strokes, also after an
effect around it turns a piece into a compound path or puts it in a group.
The clip group's visual bounds take in the stroke pieces' width, and HP-GL
export draws the clipping path once, in its stroke pieces.
An export of a painted clipping path with such effects in a clip group
without effects of its own also keeps its fill and stroke now, where the
baked pieces painted nothing.
A clip group whose clipping path is type with a fill or stroke lost that
paint when a group around it had a geometry effect. Outlining the type
for the effect replaced it with a group of glyph outlines, and a group
paints nothing as a clipping path. Distort effects lost it on the canvas
and in SVG and PDF; Transform effects that only move lost it in SVG and
PDF when other type in the group stayed type.
The type's outlines now clip, its fills become art behind the clipped
art inside the clip, and its strokes become art over it outside the
clip, as the canvas draws an unaffected clip group.
The 3D and Materials panel gets a Render Settings menu with Wireframe.
Extrude & Bevel, Revolve, Inflate and Rotate take a `render` parameter,
`{mode: "shaded" | "wireframe"}`. In wireframe mode the effect stays
live and draws the edges Expand as Wireframes gives, each once, as
0.5 pt black strokes with round joins, with no shadow or graphics. The
object's own opacity, blending mode and opacity mask apply to the mesh.
Commands that set wireframe mode are checked against the edges it
draws: the shaded surface's paint copies, graphics and shadow limits do
not refuse them. A `render` value that is not an object holding only a
valid `mode`, and `render` on the 3D (Classic) effects, are refused.
Docs: docs/three-d.md, docs/mcp.md, docs/effects-parity.md,
docs/target-app-parity.md.