Area type with wrap shapes was always written as outlines in the editing
data for other apps. It is now written as type when the reader works the
same wrap out again from the objects above it: each wrap object is a path
of one subpath, a compound path of visible members, or an unclipped group
of such objects, with no paint, or a solid fill, a plain solid stroke or
both, without effects, art style, opacity mask or clipping, with an
offset within -1000 to 1000 pt; the type's stored shapes match the ones
those objects give it; and the shapes of all area type stay within the
2,000,000 anchors the reader copies. Each frame of a thread is checked on
its own. When art is left out at the object limit, such type is written
as outlines again. Other wrapped area type stays outlines.
The reader recomputes the wrap with resolve_wrap after reading
(resolve_text_wrap in crates/eps/src/import/native/build.rs) and reads the
options with text_wrap in crates/eps/src/import/ai/read/document.rs; the
round-trip tests check the reopened characters, frame, wrap shapes and
wrap objects. resolve_wrap's layer walk is shared through a new
wrap_sources so the check follows the same traversal.
Tsume no longer stops at horizontal type. In vertical type an upright
character loses its share of the blank space above and below its ink,
inside its cell down the column (the font's vertical metrics, else at
least one em, with the Proportional Metrics change), in point type and
on a path. A character lying on its side is measured along its own
width, and the characters of a tate-chu-yoko block close up across the
column while the block keeps its one em.
Tsume now measures what a glyph paints: its COLR or SVG art, else its
color bitmap, else its outline, so a color glyph is no longer measured
by the outline its art replaces.
Docs: docs/mcp.md, docs/target-app-parity.md, text.setRangeStyle and
text.setFormat params.
Paragraph panel menu > Kurikaeshi Moji Shori (text.setFormat
{kurikaeshiMojiShori}) is a paragraph attribute, off by default, saved
only when on and carried by paragraph styles. On, a repeat mark (々, ゝ,
ゞ, ヽ, ヾ) that starts a line of point or area type is drawn as the
character it repeats, with the mark's width, and the text keeps the
mark. Threaded type looks back into the frames before when a paragraph
continues. Live SVG text writes the drawn character and places the
text after it.
The Character panel shows Adjust Horizontal and Adjust Vertical Diacritic
Position with the Middle Eastern options. text.setFormat and
text.setRangeStyle take diacriticHorizontal and diacriticVertical, in
thousandths of an em from -1000 to 1000. Positive values move the
characters' mark glyphs (GDEF class 3) right and up, and the letters keep
their places. An Arabic harakat or a Hebrew point styled apart from its
letter takes its own values without splitting the shaping cluster.
Character styles and Character Style Options carry both values. They are
saved only when set, and SVG export writes such type as outlines.
Docs: docs/mcp.md, docs/type-parity.md, docs/target-app-parity.md.
Type > Composite Fonts... has Custom: named character sets, each setting
the characters it lists in its own font, style, size, baseline and
scales ahead of their class. The later of two sets that list a character
sets it. Characters are added by Direct Entry or by Unicode code and
deleted one at a time, and the parts table scrolls when it grows.
- type.compositeFonts.set takes `custom`; part keys left out take the
Kanji part's values. Sets are saved with the document and in
.vccomposite files, and Export refuses a file over 4 MB.
- VectorCraft's own limits: 64 sets per font, 8,192 characters per set,
each character once per set, up to U+FFFF and no control characters.
- The font database caches each font's character lookup.
Docs: docs/mcp.md, docs/type-parity.md, docs/target-app-parity.md.
- A form other than the default, set with text.setRangeStyle or
text.setFormat, takes away the characters' glyph choice, which would
otherwise keep drawing its own glyph. "default" keeps it.
- With a width form (fwid, hwid, twid, qwid), shaping leaves out palt and
turns kern and apkn off, and SVG output writes font-kerning: none and no
palt, as the OpenType feature list asks. proportionalMetrics and kerning
keep their values.
- The Glyphs panel menu counts a width form as available when a face has
the feature in GSUB or GPOS.
- At a caret, the menu's check marks and its no-op check read all the
text of the object, which is what the command formats. Choosing the
current form again is not skipped when a character has a glyph choice.
Type on an open path can now start before the path's start: its start
is stored below 0, the span runs from there, and the characters whose
middle falls before the path's start are not drawn, as SVG 2 lays out
text on a path (https://www.w3.org/TR/SVG2/text.html#TextLayoutPath).
The text keeps every character, and the start bracket stays at the
path's start. Past the path's end, text that does not fit is overflow,
as for other type on a path. Type that starts on the path draws every
glyph as before.
- SVG import keeps a <textPath> start before an open path's start
(text-anchor end or middle, or a negative startOffset) instead of
starting the text at the path's start, which drew every character.
- SVG export writes it as a negative startOffset.
- PDF export writes only the characters drawn on the path.
- The legacy .ai and .ai editing data writers write the type from the
path's start with the type attributes warning.
- type.pathOptions takes a start below 0 for type on an open path; on a
closed path it is the path's start, as before. A flip starts the type
at its start bracket. Dragging the center bracket slides it from where
it starts, and no further before the path.
- A click at the path's start places the caret by the first drawn
character, and the caret in the hidden characters stands at the
path's start. The highlight of substituted fonts and glyphs leaves
them out.
- Release Type on a Path keeps the first drawn glyph where it was
drawn, with the hidden characters before it.
- The Touch Type tool shows no box for a hidden character, and
text.touchType returns an error for one. A character with a drawn
glyph is changed by that glyph.
Docs: docs/mcp.md, docs/target-app-parity.md.
With Show East Asian Options on, the Glyphs panel menu lists Traditional
Forms, Expert Forms, JIS 04, JIS 90, JIS 78 and JIS 83 Forms, Monospaced
Full-Width, Half-Width, Third-Width and Quarter-Width Forms, and Revert
To Default Forms. Each form draws the selected characters with the
font's OpenType feature for it (trad, expt, jp04, jp90, jp78, jp83,
fwid, hwid, twid or qwid). A form is checked when every selected
character has it and disabled when none of the faces that draw the
selected text, fallback faces included, has the feature.
The form is a new character attribute, glyphForm, one form at a time
(text.setFormat, text.setRangeStyle). It is saved only when set,
character styles carry it, and runs that differ only in their form
shape as one piece of text. SVG writes it in font-feature-settings;
PDF draws the glyphs from the layout.
A clipping group whose clipping object is a group, an image, a symbol
instance or type, or whose clipping path sits inside art cut to another
clipping object, is written as its members cut to that object. The
object's text wrap options went only on its fill or stroke, so an object
with no paint lost them, and a fill cut by the outer clipping object
changed the outline area type wraps around after the file was opened.
The options now go on an unpainted path (a compound path for several
subpaths) of the outline area type wraps around, written under the
clipped art, uncut, locked and hidden as the object is. The .ai reader
reads such a path and gives it the dictionary after it. Without room
under the object limit the options are left out.
Four paragraph composers: the existing Single-line and Every-line (Middle Eastern & South Asian,
complex scripts shaped, the default) and Standard Single-line and Every-line, which break lines the
same way and set Indic, Arabic and Hebrew type glyph by glyph as the font maps it.
Paragraph panel menu, Paragraph Style Options, text.setFormat, native file and paragraph styles.
.ai, EPS and PDF files carry no composer.
Character panel > Tsume, shown with Show East Asian Options, takes away a
percentage of the blank space on each side of a character's ink, inside
its own width, in horizontal type. The value is from 0 to 100, 0 by
default. 50 halves that space and 100 sets the ink against the
characters before and after it; the glyph keeps its shape. A character
without ink, such as a space, keeps its width, and a ligature or a
letter with its marks takes the value of its first character. The
font's pair kerning, tracking, manual kerning and Insert Aki are added
after it, and justification keeps it. Vertical type keeps its spacing.
- text.setFormat and text.setRangeStyle take `tsume`; a value that is
not a number or is outside 0 to 100 is refused, naming the key.
Character styles carry it, and a file holding a value outside the
range opens with the nearer end.
- The Character panel's Tsume field has 0, 25, 50, 75 and 100 in its
menu, and Reset Panel sets it to 0. Character Style Options shows it
in Advanced Character Formats.
- Live SVG text places each character Tsume moves, and type on a path
with Tsume is written as outlines.
Docs: docs/mcp.md (Tsume, Character Style Options fields),
docs/target-app-parity.md.
The Character panel menu has Warichu and Warichu Settings… with Show East
Asian Options. Warichu characters are set at a percentage of their size
and stacked on 1 to 6 lines inside their line: one above the other in
horizontal type and side by side in vertical type. Warichu Settings sets
Lines, Line Gap, Scale and Alignment.
- text.setFormat and text.setRangeStyle take warichu, warichuLines,
warichuGap, warichuScale and warichuAlign; ui.warichuSettings opens
the dialog.
- A stretch of warichu characters is one block that stays whole on one
line. The canvas and every export draw the stacked lines; SVG, PDF and
the .ai writers write such type as outlines, as they do ruby. Type on a
path sets the characters at their own size.
- The attributes are saved natively, carried by character styles and
translated in every complete catalog.
Docs: docs/mcp.md, docs/type-parity.md.
The Paragraph panel's Mojikumi Set lists None, YakumonoHankaku,
GyomatsuYakumonoHankaku, GyomatsuYakumonoZenkaku and YakumonoZenkaku,
then Line-end Punctuation Half Width, and text.setFormat {mojikumi}
takes yakumonoHankaku, gyomatsuYakumonoHankaku, gyomatsuYakumonoZenkaku
and yakumonoZenkaku besides none and lineEndHalf.
The spacing of each set is VectorCraft's own rule, built on the help
page's one-line description of each set:
- YakumonoHankaku sets every bracket, comma and full stop half width,
takes a quarter em off each side of a middle dot, and puts a quarter
em between Japanese and Latin letters or digits.
- GyomatsuYakumonoHankaku keeps punctuation full width inside a line,
sets an opening bracket starting a line flush and a closing mark
ending it half width, and takes the quarter em after a middle dot
ending a line off.
- GyomatsuYakumonoZenkaku keeps punctuation full width and adds the
quarter em between Japanese and Latin text.
- YakumonoZenkaku sets characters as None does.
Both composers and vertical type measure each line as it is set. A
right-to-left paragraph, whose line ends are measured untrimmed, also
draws them untrimmed, and a right-to-left line that ends between a
Japanese and a Latin character is measured without the quarter em the
set adds there. With a Desired glyph scaling other than 100%, the
space a set takes off before an opening bracket or middle dot, and the
Japanese-Latin space recorded at a line's end, scale with the glyph.
The sets save with the document and paragraph styles; new type and
Reset Panel keep Line-end Punctuation Half Width. SVG export lays type
with middle dots out again for its positioned spans. A .ai save
reports a paragraph with one of the new sets as left out.
Docs: docs/mcp.md, docs/target-app-parity.md, docs/type-parity.md,
docs/gaps.md.
Paragraph panel menu > Bunri-Kinshi (with the East Asian options) and
text.setFormat {bunriKinshi} turn it on per paragraph. A line then
never breaks inside two em dashes, two horizontal ellipses, two two-dot
leaders or the two halves of a vertical kana repeat mark, the pairs W3C
JLREQ lists for class cl-08 (https://www.w3.org/TR/jlreq/#cl-08), nor
inside a chain of em dashes. Both composers, vertical type, Kinsoku
Shori Type, hyphenation and No Break follow it, and a pair wider than
the line stays whole on it. Justification and letter spacing add no
space inside a pair.
The setting works only with a Kinsoku Set: with Kinsoku Set None the
paragraph keeps the value without effect and the menu item is
unavailable. It is off by default, saved with the paragraph only when
on, carried by paragraph styles (Paragraph Style Options > East Asian
Composition Settings), and turned off by Reset Panel. A value that is
not true or false is refused. The .ai editing data has no field for it,
so saving reports a paragraph with it on and a pair in it as left out.
Docs: docs/mcp.md, docs/target-app-parity.md.
Characters take two new attributes, `akiLeft` and `akiRight`: space
before and after each character in reading order, in thousandths of an
em from 0 to 1000, measured as tracking is. `text.setFormat`,
`text.setRangeStyle` and character styles set them; values that are not
numbers or are outside the range are refused, and a file holding one
outside the range opens with the nearer end. Both are saved only when
not 0.
- Layout: Left is the space above a character in vertical type and on
its right in right-to-left type. Wrapping counts the space, a line's
end keeps it when aligned, and justification and Optical kerning
leave it at its set width. A ligature, a letter with its marks and a
tate-chu-yoko block take the values of their first character.
- With Fractional Widths off or System Layout on, the space before and
the space after a character are each set in whole points and added
to its rounded width, so justification keeps them at that width. A
tate-chu-yoko block rounds the space above and below it the same way.
- Character panel: with Show East Asian Options on, Insert Aki Left and
Insert Aki Right fields with 0, 250, 500 and 1000 in their menus;
Reset Panel sets both to 0.
- Character Style Options › Advanced Character Formats shows Insert
Aki Left and Insert Aki Right, with the Character panel's 0, 250, 500
and 1000 in their menus; a typed value below 0 or past 1000 sets 0 or
1000, and Reset Panel unsets both.
- SVG export: live text places each character the space moves, and
type on a path with Insert Aki is written as outlines.
Docs: docs/mcp.md, docs/target-app-parity.md.
Korean text broke after every Hangul syllable. A paragraph now has
Korean Line Break Anywhere, set from the Paragraph panel menu (with the
East Asian options), from the East Asian Composition Settings section of
Paragraph Style Options, and with `text.setFormat {koreanLineBreakAnywhere}`.
- Off, a word that contains Hangul (the characters between spaces) breaks
only at its spaces and after East Asian punctuation, or where the word
is wider than the line. Both composers follow it, and the word takes no
hyphen. On, a line may break between any two syllables, as before.
- New type has it off. Paragraphs and text objects saved before the
option read as on, so their lines do not move; the value is saved only
when it is off.
- Paragraph styles carry it, Reset Panel turns it off, and the .ai writer
reports it as lost for Korean paragraphs.
The help page: https://helpx.adobe.com/illustrator/desktop/design-with-text/fonts-and-scripts/set-line-breaks-korean-text.html
The command is described in docs/mcp.md, and docs/target-app-parity.md
lists the option.
Paragraph Style Options and New Paragraph Style gain a Tabs section. It
lists the style's stops and edits the selected stop's Alignment, position
(X:, or Y: for vertical type), Leader and Align On character. Add puts a
left stop 36 pt past the furthest one, Delete Tab removes the selected
stop, and Clear All Tabs leaves the style with no stops. OK sorts the
stops by position and keeps the stop edited last when two share one
position. Reset Panel removes the style's tabs.
paraStyle.new, paraStyle.setAttrs and paraStyle.edit check changed tabs
stop by stop: at most 256 stops, and each changed stop's position from 0
to 100000 pt and leader of at most 8 characters. Stops the style already
has are kept as they are. Changed tabs are sorted by position, keeping
the first of stops at one position. text.tabs.set rejects a leader longer
than 8 characters, an Align On value of more than one character and more
than 256 stops. Loading paragraph styles skips a style whose indents,
spacing, hyphenation, justification or tabs are out of range.
Docs: docs/mcp.md, docs/target-app-parity.md.
The word gap is now the Desired word spacing the layout uses for area type
with Block on (TextObject::layout_justification), with Minimum and Maximum
moved out to it when it lies outside them. The paragraphs keep their own
Justification values, so a wide gap no longer leaves a 1,000 % Maximum
behind, and turning Block off brings back the paragraph's own Desired
value. The SVG writer reads the same values.
- The Contextual Task Bar offers Dynamic Text for area type outside a
thread, beside Convert To Point Type.
- type.dynamicText with wordGap or lineGap and no area type in the
selection is an error instead of being ignored.
- Docs: docs/mcp.md, params text, docs/target-app-parity.md.
Type > Dynamic Text (type.dynamicText) now also works on area type as
Block. Each line as typed (each paragraph, and each forced line break in
one) is set to the frame's width, less the inset, the column gutters and
the paragraph's indents, by changing its font size only. Lines are not
broken again. The first character's size moves in 0.1 pt steps within
0.1 to 1,296 pt, and the line's other characters keep their proportions.
The sizes are written into the characters and fitted again after every
edit to the text or the frame, in the same undo step.
- Word Gap (0 to 1,000 % of a word space, default 100) sets every
paragraph's Desired word spacing; Line Gap (-1,296 to 1,296 pt,
default 0) is added to each character's size for its leading. Both are
VectorCraft's own ranges and defaults, saved in the area options only
when they differ from the defaults.
- Area Type Options gains a Block fit (text.areaOptions fit "block",
with wordGap and lineGap), and the Properties panel's Paragraph section
shows a Dynamic Text checkbox with Word Gap and Line Gap rows.
- Block replaces Auto Size and Shrink Text to Fit. Off keeps the sizes.
Threaded area type is refused, as for type on a path.
- Empty lines keep their size, a frame with no width changes nothing,
vertical type fits each line to the frame's height, and right-to-left
lines and list markers are fitted like other lines. A refit runs at
most four extra layouts.
Docs: docs/mcp.md, docs/target-app-parity.md.
At the Type tool's caret, kerning goes on the character before the caret.
At the start of the text there is none, so Alt+arrows, the Kerning field
and Reset Tracking and Kerning did nothing; at a later paragraph's start
the kerning landed on the invisible line break.
CharStyle::kerning_before (kerningBefore) is the space before a character
that starts a line by itself: the first character of the text, of a
paragraph, or after a forced line break. Shaping gives its cluster the
space and draws it that much later along the line (right to left the
space is at its right; in vertical type it moves down the column). The
caret at such a line's start sets it (edit::caret_kerning_target), in
type.step, type.resetTracking and the Character panel; text.setRangeStyle
takes it. SVG export starts the line where the character is drawn. The
Eyedropper and character styles leave it alone.
Type › Dynamic Text (`type.dynamicText`, also on the Contextual Task Bar
for type on a path) scales the text by one factor so it fills the span
between its start and end brackets, and the layout fits it again after
each edit to the text, the path or a bracket. The first character's
size moves in 0.1 pt steps within 0.1 to 1,296 pt. Turning it off, or
threading the type, keeps the sizes it was drawn at.
- The model saves `dynamicText` only when on.
- SVG, the legacy .ai writer and the .ai editing data write the drawn
sizes through `vectorcraft_text::drawn`; the editing data warns that
the setting is not written.
- Shrink Text to Fit and Dynamic Text step the size the Character panel
shows when a size measures the cap height, x-height or ICF box.
Docs: docs/mcp.md, docs/type-parity.md, docs/target-app-parity.md.
Part of #4134.
In horizontal type, tracking and manual kerning are now thousandths of
the em as the Horizontal Scale draws it: at 50%, a tracking of 100 adds
0.05 em after each character. They were added at the full em while the
glyph advances took the scale, so narrow tracked type drifted from the
page of users' .ai files letter by letter. That page writes such type's
character spacing as the tracking itself in a text space as wide as the
scale, which PDF scales by it (ISO 32000-1 9.4.4). Vertical type keeps
the full em: its advances down the column don't all take the scale.
vectorcraft_text::spacing_scale gives the factor. Shaping, inline
graphics and the Optical pairs use it, and so do the conversions from
points back to thousandths of an em: the automatic kerning the Character
panel reads and Touch Type's limits (glyph_em), Combine Point Text, and
PDF import, whose tracking is now the file's Tc. Scale Text Attributes
now keeps tracked type where a horizontal stretch drew it.
SVG export writes letter-spacing in thousandths of the font size it
writes (the vertical scale), so uniformly scaled type keeps its spacing
in a viewer.
Type with both a Horizontal Scale other than 100% and tracking or manual
kerning lays out differently than before, in every document.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Direct Selection showed and dragged the anchors of type on a path's path
(#3980) but not their direction handles: handle_anchors read only a
path's own data, and the canvas draws only a path's handles.
- text.setPathHandle moves a handle of type on a path's path, in
document space, as path.setHandle moves a path's; the brackets keep
their fractions and the text reflows. One undo step.
- Direct Selection draws the handles of selected type on a path and
drags them with it (Alt: one side, Shift: 45 degree steps).
Measure Type by Glyph Bounds (`typeGlyphBounds`, off by default) is in
Preferences > Type > Glyph Bounds and the Transform panel menu. With it
on, the bounding box, the Transform, Control bar and Properties X, Y, W
and H, `object.setBounds`, the transform tools' reference point and the
Arrange commands measure point type selected on its own by the ink of
its glyphs instead of its em box. A typed W or H scales the live type
until its ink has that size.
- The engine caches each type object's ink in text space with its
layout bounds; the cache is not saved.
- Use Preview Bounds adds the characters' strokes, and type with
geometry effects is measured as drawn. Skewed type is measured by its
outlines.
- Type that draws nothing, area type, type on a path and type inside a
selected group are measured as before. Align and Distribute keep
following Align to Glyph Bounds.
Docs: docs/mcp.md, docs/control-protocol.md, docs/target-app-parity.md,
object.setBounds params text.