The closed subpaths of a profile now close a partial sweep's cut sides
together, with the area the object's fill rule fills, instead of one
region per subpath marked as a hole by most of its edges. Two closed
subpaths that overlap with only a corner inside each other no longer
fill their overlap under the even-odd rule, and under the nonzero rule
the overlap is filled once.
The cut-side regions are taken after the profile gets the anchor where
a mapped side is cut, so the cut sides kept for a mesh have a corner at
every corner of the edge they share with the side.
When the search for holes in a partial sweep's cut sides passes its work
limit, Revolve now reports the profile as too complex instead of closing
the cut sides with every hole filled.
With an Angle below 360 and Cap on, Revolve and Revolve (Classic) now
close the two angular cut sides instead of leaving them open. Each side
is flat and evenly shaded and is drawn in depth order with the rest of
the surface: the region between each open subpath and the axis, and the
area of each closed subpath, one face per region. A subpath that walls
a hole under the object's fill rule leaves the hole open, and a
self-intersecting subpath fills what the nonzero rule fills. The cut
sides appear in preview, SVG/PDF export, Expand Appearance, Expand as
Wireframes, shadows and exported 3D meshes. Cap off keeps the surface
hollow.
Painter visibility now looks for covers over every piece of a face, so
a face drawn as several contours is trimmed where any of them is
covered.
Docs: docs/revolve.md, docs/three-d.md, docs/mcp.md, the
effects-parity row, the Cap tooltip and its catalog rows.
The first light's Softness now softens the shadow of Revolve, Extrude &
Bevel, Inflate and Rotate. At 0% the shadow stays the hard-edged path.
Above it the path carries a Gaussian Blur of radius Softness x the
object's largest size x (5% + 20% x Distance from Object), at most
1,000 pt, VectorCraft's own mapping. The blur draws, counts in the
bounds and exports as a Gaussian Blur effect does, a fill's or stroke's
own 3D effect keeps it below its later effects, and Expand Appearance
turns a blurred shadow into an image.
A subpath's anchors are now an `Anchors` list held in chunks of up to
256 anchors behind `Arc`s. Copying a path copies the chunk table and
shares the chunks, and editing one anchor copies only the chunk that
holds it, so the undo step of a one-anchor edit no longer keeps a copy
of every anchor of the path. Inserting or removing an anchor copies the
chunk it is in and rebuilds the table. Reads and edits follow the Vec
and slice methods the code used; files write and read each subpath's
anchors as one list, as before, within the same anchor read budget.
The undo memory estimate counts only the chunks the other version of
the path does not hold, and the renderer's kept paths compare only the
chunks an edit copied when they look for moved anchors.
Moving one anchor of an open path of 10,000 or 200,000 anchors
(path.moveAnchor, path.setHandle, path.moveAnchors, a nudge) keeps at
most 48 KiB in its undo and redo steps, where it kept 56 bytes per
anchor.
With no volume, each shape waits to be solved until its solid is taken,
so its path is copied first. A shape with more contours or anchors than
the solid's point limit allows is now refused before it is copied, with
the error solving it would give, instead of being copied in full. The
check counts each contour's anchors without reading them.
An inset ring limited a corner's miter by moving the corner four times
the bevel width along its bisector. At a corner sharper than about 29°
that the bevel opens (a convex corner with the bevel outside, a notch
with it inside), the bevel still ran out to a spike up to four times
the width and no longer lined up with the art. With the bevel outside,
the wall behind it spiked the same way.
Such a corner is now given twice in the outline before the solid is
built, and each copy moves along its own edge's normal, so the bevel
(and, with the bevel outside, the wall) cuts the corner square, as a
bevel join cuts a stroke. Corners within the limit keep their miters,
and corners where the inset edges meet keep the four-times limit.
A cap's outline skips the straight segment of no length between the
two copies where they do not move apart.
Docs: docs/three-d.md, docs/target-app-parity.md.
Revolve sorted its faces by the depth of each face's middle only, so a
tilted profile with long edges, or a profile of several contours, could
draw a nearer face under a farther one where the two overlap.
- A revolved face carries its view-space plane (none when its corners lie
off one plane or reach the eye), and Revolve (Classic)'s facets keep it.
- Revolve and Revolve (Classic) put each surface's faces through the local
depth order Extrude & Bevel uses for its fill and strokes: when two
overlapping faces are drawn the wrong way round, every pair of
overlapping faces goes in the order of their depths at the middle of the
overlap, within the same 4,000,000-comparison limit. A surface already
in the right order keeps it.
- A group's members, sorted together by depth, go through the same order
across members.
Docs: docs/revolve.md, docs/effects-parity.md, docs/target-app-parity.md.
With Shadows on, Extrude & Bevel, Inflate, Rotate and Revolve built
every solid twice: once for the art and again for the shadow. The build
that draws a solid now also keeps the faces its shadow is cast from and
the projection they were built with, and the shadow is cast from them.
The art and the shadow are unchanged.
- three-d: the solid builder can keep the projected facets and the
view-space faces together (`Keep::Both`); `extrude_shadowed`,
`plane_shadowed`, `inflate_shadowed` and `revolve_shadowed` return
both, and `ShadowCaster::add_solid` adds the kept faces. Revolve's
sweep draws the surface and keeps the shadow's faces in one pass; a
shadow past its limits still gives the same error while the surface
draws.
- effects: the solids drawn hand their faces to the shadow. A stroke's
solid left out of the art is still built for the shadow alone, as
before.
Tests compare each solid and its shadow with the two built apart, to
the bit, and count the solids built for a shadowed object.
At a Volume of 0 % no shape puffs, so the eye does not depend on the
other shapes. Each shape's membrane is now solved as its solid is taken,
and a caller that stops at the object's face limit solves none of the
shapes after it. With any volume every puff is still solved first, since
the highest one places the eye, and the solids are unchanged bit for bit.
The shadow no longer builds the solid of a fully transparent fill or
stroke: its puff still places the eye, and at 0 % volume it is not
solved either.
Export 3D Object built every Extrude & Bevel (both kinds) and Inflate
solid twice: once for the facets that decide whether the art draws it and
count toward the object's face limit, and again for its mesh.
The solid builder now keeps the projected facets and the faces before
projection from one pass (`extrude_meshed`, `inflate_meshed`), and the
export decides and meshes each part from that one build. Where a mesh
built alone cuts Inflate's twisted sides differently (it has less room
left after keeping the faces turned away), the mesh's sides are cut with
its own room. Strokes past their limits are still left out, a fill's
error and the object's face limit still stop the export at the same
part, and the triangle budget is unchanged.
Tests compare the facets and meshes with separately built ones bit for
bit, and count one build per solid.
- When the faces that overlap form a cycle of depth orders, the order
broke the cycle only after drawing every face with nothing to wait
for, so a cap could be drawn before the walls and they painted over
it. A face drawn last now keeps its place: no face moves across it.
- A face with a corner at or past the eye, which the perspective
projection holds just in front of the eye, no longer gets a plane,
so its depth is not measured on a plane its drawing does not match.
- docs/three-d.md states the masked member rule in Groups as the
Fills and strokes section does, and docs/target-app-parity.md cites
the Inflate test by its name.
- Each contour of a graphic is cut only at the faces its own bounds reach,
and the points cut at the faces count toward a limit of 64,000,000.
- The paint copies of a graphic's parts count toward a budget of their own,
one copy for a part's fill and one for its seam stroke when it takes one.
- A part filled with a pattern, or whose gradient has a transparent stop or
point, takes no seam stroke.
- Under several lights an opaque solid part also covers its seams, with its
lit art clipped to a band of the seam stroke's width.
- A line of a graphic that reaches farther than any surface is refused, as a
curve already was.
- A full turn places each segment by its own middle, so the cut at the back
falls on the segment edge nearest half a turn from the middle.
- A group's members are measured for graphics only when it has some.
- docs/three-d.md: Revolve shows no Face control, and the new limits.
Extrude & Bevel, Extrude & Bevel (Classic) and Inflate sorted the fill
walls and the faces of a stroke that leaves gaps (dashed, profiled,
brushed) by one depth each, so a far stroke face could draw over a near
fill wall and the reverse. Two such strokes on one shape drew over each
other the same way, and Inflate drew a plain stroke as if it covered
the fill's edge, which an inflated fill can rise in front of.
- Each flat facet now carries its plane, so its depth can be measured
at any point under it, with orthographic and perspective views.
- Where faces of one shape's fill and strokes overlap in the wrong
order, the overlapping faces are ordered by their depths where they
overlap. A fill wall and its covering stroke keep their order.
- A face of a stroke that leaves gaps that passes through a fill wall,
a covering stroke's face or an earlier such stroke's face is cut
along the line where their depths meet, keeping its curved outline,
within the face limit and the paint allowance.
- Under Inflate, no stroke counts as covering the fill's edge.
- The faces go in one order when the fill and strokes are at full
opacity with Normal blending. A member of a 3D group with an opacity
mask or a blending mode of its own orders its faces inside it when
its own paints qualify. A gradient with transparent stops keeps the
one order with graphics on its cap, and so does Inflate in gradients
under a colored light. A solid color under a colored light, drawn as
one composite per surface, still draws each surface whole.
The Materials tab and threeD.mapGraphic now map graphics onto
Revolve's swept side, unrolled flat: x runs around the axis (the
angle times the profile's distance from the axis at that point) and
y along the profile. A graphic keeps its size at every distance from
the axis, so it reaches farther around where the profile comes nearer
the axis. Each face of the side draws the part that falls on it: a
graphic narrows toward the silhouette, follows the profile along its
length, is shaded with the surface (several lights included) and is
hidden where the side faces away. A part that runs past the end of
the profile reaches the curved rim and stops there. The middle of the
side faces the viewer with the axis on either edge. On a compound
profile or a group the graphics go on the longest contour.
- three-d: with Revolve::map_surface set, side faces carry a
SurfaceCell (corners on the page and on the unrolled side, whether
the outside faces the viewer) and a closed profile off the axis
takes an anchor where its side is cut; without it the faces are as
before. revolve_surface_size gives the side's size for a new
graphic's fit.
- effects: Revolve takes `graphics` (front only); surface_parts cuts
and maps them per face; curves are cut into straight pieces one at
a time, and commands refuse graphics past the point limits;
switching between Extrude, Plane and Revolve keeps the front's
graphics.
- The Materials tab hides Face for Revolve; params text, docs/mcp.md,
docs/three-d.md and the progress docs describe the change.
- i18n: the complete-message catalogs translate the three new
refusals in place of the planar-faces refusal they replace, and ja,
es, zh-hans and zh-hant translate the Materials tab's label.
Extrude & Bevel (both kinds) and Inflate built every fill and stroke
solid of an object, each up to 163,840 faces, before any check, so one
effect on a path with many strokes or a group with many members could
build several times that. The solids are now built in order and their
faces counted together: once they pass 163,840 (VectorCraft's own
limit), no later solid is built, the object draws its source art, and
effect.apply, effect.setParams, Export 3D Object and Expand as
Wireframes report "The 3D surface is too complex; simplify the shape".
A stroke left out for its own limits is not counted.
Export 3D Object now builds Extrude & Bevel (Classic) meshes with the
Classic bevel options, so the exported solid matches the drawn one.
Extruded type with a taper showed a row of light ticks along its walls,
and with a stroke a long light line down a wall (#7019).
A taper only scales each wall's far edge toward the center of the
bounds as it goes back: the scale is linear in depth, so without a
twist each wall stays a flat trapezoid, bevel bands included. The walls
were cut into 8 slices all the same, and at every joint between slices
a neighbor's seam painted a light tick onto the wall. Walls are now cut
into slices only for a twist, which bends them; the ticks and the long
line are gone from tapered, untwisted walls. Twisted walls and Inflate's
sides are sliced as before.
A tapered wall now draws like an untapered one, with three effects:
- A wall seen almost edge-on ends in one longer sliver instead of the
last of its slices. With mitered seams that sliver's thorn is longer;
round seam joins (#6980) keep it within half the seam's width.
- Its seam is as wide as an untapered wall's (the width follows the
face's thickness, up to 0.75 pt), wider than a slice's was.
- It is sorted by one depth, like an untapered wall, so at a concave
corner it can be drawn over a nearer face where the slices had
happened to avoid that (#7023).
Test: solid::tests::a_tapered_wall_is_one_flat_face_and_a_twisted_one_is_sliced
checks that a tapered square's four walls are four flat faces, that a
taper adds no faces to a circle's walls, with bevels (both sides,
inside), in perspective or hollow, and that a twisted wall is still
sliced. With taper slicing it fails (32 wall faces for the square's 4,
608 for the circle's 76).
Docs: docs/three-d.md, docs/target-app-parity.md.
Under a perspective, a piece of a graphic's curve that lies in front of the eye while one of its control points does not is halved until its control points map, instead of dropping the piece. A curve that dips behind the eye between the ends of its pieces is still clipped. The extra pieces count toward the effect's element limit, and a path that passes the limit is not sent to the clipping.
- The graphics of one 3D effect share one limit on drawn path elements
across every member and opacity group, so a group effect with many
members no longer multiplies the limit.
- Copy and paste follow the symbols that mapped graphics name, in object
and graphic style appearances: a document without the symbol gets it,
and one whose symbol of the same name is other art gets the copied
symbol under a free name, which the graphic then names.
- A face's inverse map refuses the points its page map refuses, so a
handle drag cannot save an offset whose handle is not shown.
- A press on a graphic's handle with Space held, or with the Hand, Zoom
or Rotate View tool, pans, zooms or turns the view.
- A handle drag ends, keeping its preview, when the selection or the
document changes while the pointer is down.
The Materials tab of the 3D and Materials panel lists the document's
graphics (symbols). Add as Single Graphic keeps the selected art as a
new symbol (threeD.addGraphic), and clicking a thumbnail maps it onto
the front of each selected object's 3D effect (threeD.mapGraphic) in
one undo step. The tab lists the mapped graphics with Face, X, Y, Scale
and Rotation and Remove Graphic, and a handle on the artboard drags a
graphic over its face.
The graphics are the new `graphics` parameter of threeD.extrude and
threeD.rotate: drawn on Extrude & Bevel's front and back caps and on
the Plane type, turned, foreshortened, twisted and tapered with the
face, shaded with its light and clipped to it. Symbol renames follow
into the graphics, and Select All Unused counts a symbol a graphic uses.
Docs: docs/mcp.md, docs/three-d.md, docs/effects-parity.md.
Effect › 3D and Materials › 3D (Classic) › Revolve (Classic)… sweeps the
profile round a vertical axis, as Revolve does, and draws every face with
the Wireframe, No Shading, Diffuse and Plastic surfaces of Extrude & Bevel
(Classic).
- `effect.apply` with `threeD.classicRevolve`: Angle (0 to 360), Cap,
Offset (0 to 1000 pt) from the left or right edge of the profile's
bounds, the Position rotation and Perspective, and the classic lights,
Ambient Light, highlight, Blend Steps and Shading Color.
- Groups and layers revolve about one shared axis, and the effect also
goes on a fill or stroke, as Revolve's does.
- `effect.lightingPreset` refuses it, as it refuses Extrude & Bevel
(Classic).
- Revolve faces carry their view-space normal, and
`three_d::revolve_facets` hands them to the classic surface code.
- Unknown parameters, numbers out of range and bad flags, edges,
surfaces and colors are refused with an error.
Revolve, Extrude & Bevel, Inflate and Rotate take a Shadows switch on the
Lighting tab, with Position (Behind Object or Below Object), Distance from
Object (0 to 100%) and Shadow Bounds (10 to 400%), saved in the effect as
shadow, shadowPosition, shadowDistance and shadowBounds.
With shadows on, the first light casts a hard-edged vector shadow of the
solid: every face of every solid of the object projected along the light
onto a plane behind the object (square to the view) or below it (square to
its own vertical axis and turned with it), filled black with the nonzero
rule at 50% times the opacity of the art that casts it, in that art's
blending mode, and drawn behind the solids. Distance moves the plane away
by a share of the object's largest size; Bounds ends the plane at a square
about the foot of the object's center, four times that size across at
100%. No shadow is drawn while Shading is off, when the first light's
intensity is 0, or when it does not reach the plane. A member's opacity
mask and blending mode apply to the part of the shadow it casts. A shadow
is cast from at most 327,680 faces; past that, commands are refused and a
loaded file draws the source path. The canvas, SVG and PDF exports draw the
shadow, and Expand Appearance keeps it as a path. Values out of range are
refused before the document changes.
Docs: docs/three-d.md, docs/mcp.md, docs/effects-parity.md and the
docs/target-app-parity.md evidence list.
Extrude & Bevel (both kinds) and Inflate drew the faces of the fill's
solid and the stroke's solid in one order by each face's center depth.
At a concave corner a long fill wall could sort after a stroke wall in
front of it, so stripes of the fill showed through the stroke.
- Facets now record whether they are side faces (walls, bevels,
Inflate's sides) and whether they are turned away from the viewer.
- With caps on, each fill side face turned toward the viewer is drawn
before every face of the same shape's stroke whose bounds overlap
it, for strokes whose solid hides the fill's whole edge: a closed
shape, a width, no dashes, width profile or brush, and a solid color
or a gradient without transparent stops. Caps, other shapes in a
group, hollow effects and translucent or blended surfaces keep their
order.
Docs: docs/three-d.md (Fills and strokes), docs/target-app-parity.md.
A cap inset by a bevel fitted each run of sampled edges along one curve
as a whole, while the wall next to it fitted each sampled edge by itself.
The two outlines lay up to 0.25 pt apart on an 800 pt circle, which left
a gap or an overlap between the cap and the wall.
An inset outline is now fitted one sampled edge at a time in the cap as
well, so both faces draw the same curves. Caps that are not inset keep
one cubic for each curve of the art.
Test: solid::tests::a_beveled_cap_and_its_walls_share_their_curves.
Docs: docs/three-d.md, docs/target-app-parity.md.
Extrude & Bevel (both kinds) and Rotate wrote every face as straight
segments between sample points, so Expand Appearance and the exports
gave a corner at every sample. Sampling now records the curve each
polygon edge follows, and a facet carries an outline of cubics rebuilt
from it: exact without perspective, within 0.001 pt with it, and within
the sampling tolerance for bevel insets. Caps, Rotate's face and the
wall and bevel edges that meet a cap keep curves; interior bevel edges,
edges a twist cuts and edges past 1,048,576 curves stay straight.
Inflate's faces stay polygons.
Docs: docs/three-d.md, docs/target-app-parity.md.
Inflate's grid clipped every ring of the outline in each cell the
outline crosses and tested every edge for each cell's center, so its
work grew with the outline's points times the cells: a comb of 4,000
teeth (16,002 points) took 1.1 to 1.3 s and one of 16,000 teeth 8.8 to
9.1 s. Inflate now counts that work (the edge index's entries, the edges
its queries look at and the ring points its cells clip) and refuses the
shape with "The 3D surface is too complex; simplify the shape" once it
passes 268,435,456, VectorCraft's own value (about 0.65 s). The index
takes at most 16,777,216 entries (64 MiB). Each row's inside test reads
the sorted crossings of its line, and a cell clips only the rings whose
bounds meet it, so a 65,536-point circle inflates in 0.66 s instead of
1.0 to 1.2 s.
The effects test of a stroke past the limits uses 40,000 corners, so its
outline passes the 65,536 points a solid takes.
Docs: docs/three-d.md, docs/mcp.md.
Each Extrude & Bevel and Inflate solid now takes up to 65,536 outline
points (was 2,048) and 163,840 faces (was 32,768), VectorCraft's own
limits, as Revolve's. Before any point is sampled, the outline's lines
and curves are counted with each curve's tolerance pieces, and the faces
the walls, bevels and caps (Extrude) or the sides (Inflate) need. When
they do not fit, every curve takes fewer pieces, down to 4; a shape that
does not fit at 4 is refused with the existing surface error before any
face is built. The subpath count is capped at the point limit too. The
error texts are unchanged.
A closed path of 2,000 curves now extrudes with a bevel and inflates,
and paths of 5,000 and 10,000 curves build at the default settings.
Docs: docs/three-d.md, docs/mcp.md, docs/target-app-parity.md.
revolve_curve_samples counted a profile's contours but never compared the count with the limit,
so a profile made only of empty or one-anchor subpaths passed, although each contour takes one
profile point. HoleSearch::new then built one entry for each subpath without a limit, and mesh
export skips revolve_curve_samples when curve_samples is given. Both now refuse a profile with
more than 16,384 contours as too complex.
Mesh export decided whether an edge walls a hole at the edge's middle alone, so an edge that crosses another closed contour turned its whole length toward the hole, or none of it. Each sampled piece of a closed contour is now cut where it crosses another closed contour, and each part faces a hole only where it walls one.
Mesh export tested the middle of every segment against every closed contour's bounds, so a profile of thousands of separate contours took hundreds of millions of comparisons before the work limit counted any. The closed contours now go in a grid over their bounds, a point is tested only against the contours of its cell, and placing a contour in a cell and each candidate looked at count toward the limit.
Each fill or stroke with its own Revolve counted the copies of its paint from zero, so an object with several of them could draw past the 256 MiB budget. They now share one count, and past it the source path draws, as for the members of a group.
effect.apply and effect.setParams on a fill or stroke now check the Revolve in that item's paint, after the item's geometry effects before it, together with the object's other items that carry a Revolve. Before, they checked the object's top fill.
docs/revolve.md marks the axis position, type handling and member paint as VectorCraft's own rules, and docs/mcp.md says how the budget is counted.
Type sweeps as its glyph outlines and stays editable. On a group or layer every visible member sweeps about one axis on the edge of the members' bounds together, each in its own paint.
A surface now takes up to 16,384 profile points and 163,840 faces. Curves take fewer samples, down to 4, when a surface passes those limits, and the command reports the failure below that, after the geometry effects before the Revolve and with the cumulative size of its paint copies counted. Mesh export turns the walls of holes toward them. Expand Appearance works on type with Extrude as well as Revolve.
Fixes#3617