Extrude & Bevel (Classic), Revolve (Classic) and Rotate (Classic) take
shadingColor blackOverprint. Each face keeps its paint unchanged, and a
face that darkens gets black over it, as strong as the darkening of the
shading color Black: a fill multiplied and overprinting, and a seam
stroke overprinting with Darken. The black is on the black plate in
Separations Preview and is written to PDF as overprinting fills. The
Plastic highlight is not drawn with it.
Preserve Spot Colors draws its black with the same helper, so its seam
stroke no longer multiplies the black a second time along face edges.
The dialogs list the choice, with catalog rows next to Shading Color.
Params text, docs/mcp.md, docs/three-d.md and docs/effects-parity.md
describe it.
With an Angle below 360 and Cap on, Revolve and Revolve (Classic) now
close the two angular cut sides instead of leaving them open. Each side
is flat and evenly shaded and is drawn in depth order with the rest of
the surface: the region between each open subpath and the axis, and the
area of each closed subpath, one face per region. A subpath that walls
a hole under the object's fill rule leaves the hole open, and a
self-intersecting subpath fills what the nonzero rule fills. The cut
sides appear in preview, SVG/PDF export, Expand Appearance, Expand as
Wireframes, shadows and exported 3D meshes. Cap off keeps the surface
hollow.
Painter visibility now looks for covers over every piece of a face, so
a face drawn as several contours is trimmed where any of them is
covered.
Docs: docs/revolve.md, docs/three-d.md, docs/mcp.md, the
effects-parity row, the Cap tooltip and its catalog rows.
The Lighting tab of Extrude & Bevel (Classic), Revolve (Classic) and
Rotate (Classic) now shows the lighting sphere, in the 3D and Materials
panel and in the options dialog, while the surface is Diffuse or
Plastic. A light drags to a new Rotation and Height, a press selects
it, and the button below the sphere moves it behind or in front of the
object. Add Light places a new light at the front center and Delete
Light keeps at least one light. The classic effects shade without light
color, so their suns are drawn white.
The 3D and Materials panel gets an Export 3D Object button. It adds the
selected objects that have a visible 3D effect to Asset Export as 3D
assets through assets.add3D, the command behind Asset Export's own
Export 3D Object, selects their assets there and shows the Asset Export
panel. Objects without a 3D effect, and a 3D object inside another
selected one, are left out. The button is unavailable while no selected
object has a visible 3D effect. Adding is one undo step, and nothing is
recorded when every object is an asset already.
Docs: docs/three-d.md, docs/mcp.md, docs/effects-parity.md,
docs/target-app-parity.md.
A feGaussianBlur or feDropShadow whose blur is not the same in every
direction in the document came in as an even Gaussian Blur or Drop
Shadow of the mean standard deviation. That covers two different
standard deviations (stdDeviation="4 1") and an even one in a skewed or
unevenly scaled user space. An SVG Filters effect in such a user space
is exported live under that transform, so on reopening its blur lost
the difference between directions.
Such a filter is now kept as an SVG Filters effect, which draws it as
it is. A blur in a turned, flipped or evenly scaled user space still
becomes the live effect, and a filter that no SVG Filters effect can
keep still comes in as the nearest even effect, as before.
Extrude & Bevel (Classic), Revolve (Classic) and Rotate (Classic) get a
track cube below the Position presets, drawn at the current X, Y and Z
rotation inside a ring. Dragging a face turns the object freely, Shift
keeps the drag to the screen's horizontal or vertical axis, an edge turns
it about the object axis it runs along, and the ring turns it in the
screen plane. Escape during a drag puts the angles back. With the
keyboard focus, the arrow keys and Page Up/Down turn it 1° a press (15°
with Shift). The cube writes the existing rotationX, rotationY and
rotationZ, so the fields and presets follow it and OK records one undo
step. It is off while the panel's selected effects hold different
rotations.
The first light's Softness now softens the shadow of Revolve, Extrude &
Bevel, Inflate and Rotate. At 0% the shadow stays the hard-edged path.
Above it the path carries a Gaussian Blur of radius Softness x the
object's largest size x (5% + 20% x Distance from Object), at most
1,000 pt, VectorCraft's own mapping. The blur draws, counts in the
bounds and exports as a Gaussian Blur effect does, a fill's or stroke's
own 3D effect keeps it below its later effects, and Expand Appearance
turns a blurred shadow into an image.
Extrude & Bevel (Classic), Revolve (Classic) and Rotate (Classic) take a
preserveSpotColors param and a Preserve Spot Colors checkbox on the
Lighting tab. When it is on, a fill or stroke linked to a spot or global
swatch stays linked on every face: the highlight lowers the swatch's
tint, and a face that darkens gets black over it, multiplied and
overprinting, so a spot color keeps its own plate in separations and PDF.
The checkbox is unavailable while Shading Color is Custom, and the param
does nothing then. With the option off, the faces draw as before. A
value that is not true or false is refused.
The 3D and Materials panel gets a Render Settings menu with Wireframe.
Extrude & Bevel, Revolve, Inflate and Rotate take a `render` parameter,
`{mode: "shaded" | "wireframe"}`. In wireframe mode the effect stays
live and draws the edges Expand as Wireframes gives, each once, as
0.5 pt black strokes with round joins, with no shadow or graphics. The
object's own opacity, blending mode and opacity mask apply to the mesh.
Commands that set wireframe mode are checked against the edges it
draws: the shaded surface's paint copies, graphics and shadow limits do
not refuse them. A `render` value that is not an object holding only a
valid `mode`, and `render` on the 3D (Classic) effects, are refused.
Docs: docs/three-d.md, docs/mcp.md, docs/effects-parity.md,
docs/target-app-parity.md.
An SVG whose filtered element sits under a rotate, skew, uneven scale or
matrix transform now opens with the filter as a live Effect > SVG Filters
effect instead of losing it with a warning.
- The svg.filter effect takes an optional axes [a, b, c, d]: the document
directions of one unit along the filter's x and y axes, before scale.
effect.apply and effect.setParams refuse axes with an entry outside
-1000..1000 or a determinant within 0.001 of 0.
- With axes, the filter runs on a canvas lined up with its user space, so
offsets, blurs and the region run along the element's axes, and the
result is drawn back through axes. The canvas holds at most 4 times the
object's raster pixels. A region measured against the object's box uses
the object's box in that user space.
- SVG import stores the element's user space as scale, origin and axes.
- SVG export writes such a filter live: a group's transform holds the
user space, and the art is written in document coordinates in a group
with the inverse transform, so strokes keep their widths.
Effect › SVG Filters and Apply SVG Filter list 14 default filters in
every document, before the document's own. The set, the names and the
values are VectorCraft's own, written with SVG 1.1 filter primitives
(crates/effects/src/svg_filter/defaults.rs).
A document holds none of the defaults until one is applied or edited
there. svgFilter.apply with a default's name copies it into the document
in the same undo step, and svgFilter.define with replace naming a default
adds the edited copy under that name. The copy is listed in the default's
place. svgFilter.delete refuses a default the document holds no copy of,
and deleting the copy lists the default again.
svgFilter.list also returns the defaults. svgFilter.apply takes index and
item to put the filter in the place of an applied SVG filter, which the
dialog's OK uses when it is opened for an applied effect; an index that
is not an applied SVG filter, null included, is an error.
Revolve sorted its faces by the depth of each face's middle only, so a
tilted profile with long edges, or a profile of several contours, could
draw a nearer face under a farther one where the two overlap.
- A revolved face carries its view-space plane (none when its corners lie
off one plane or reach the eye), and Revolve (Classic)'s facets keep it.
- Revolve and Revolve (Classic) put each surface's faces through the local
depth order Extrude & Bevel uses for its fill and strokes: when two
overlapping faces are drawn the wrong way round, every pair of
overlapping faces goes in the order of their depths at the middle of the
overlap, within the same 4,000,000-comparison limit. A surface already
in the right order keeps it.
- A group's members, sorted together by depth, go through the same order
across members.
Docs: docs/revolve.md, docs/effects-parity.md, docs/target-app-parity.md.
The Materials tab and threeD.mapGraphic now map graphics onto
Revolve's swept side, unrolled flat: x runs around the axis (the
angle times the profile's distance from the axis at that point) and
y along the profile. A graphic keeps its size at every distance from
the axis, so it reaches farther around where the profile comes nearer
the axis. Each face of the side draws the part that falls on it: a
graphic narrows toward the silhouette, follows the profile along its
length, is shaded with the surface (several lights included) and is
hidden where the side faces away. A part that runs past the end of
the profile reaches the curved rim and stops there. The middle of the
side faces the viewer with the axis on either edge. On a compound
profile or a group the graphics go on the longest contour.
- three-d: with Revolve::map_surface set, side faces carry a
SurfaceCell (corners on the page and on the unrolled side, whether
the outside faces the viewer) and a closed profile off the axis
takes an anchor where its side is cut; without it the faces are as
before. revolve_surface_size gives the side's size for a new
graphic's fit.
- effects: Revolve takes `graphics` (front only); surface_parts cuts
and maps them per face; curves are cut into straight pieces one at
a time, and commands refuse graphics past the point limits;
switching between Extrude, Plane and Revolve keeps the front's
graphics.
- The Materials tab hides Face for Revolve; params text, docs/mcp.md,
docs/three-d.md and the progress docs describe the change.
- i18n: the complete-message catalogs translate the three new
refusals in place of the planar-faces refusal they replace, and ja,
es, zh-hans and zh-hant translate the Materials tab's label.
- a_faces_seam_stays_within_half_its_width_of_the_face checks Rotate
(Classic)'s branches too: No Shading keeps its paint, a gradient keeps
the gradient, and Diffuse shades its plane darker at some view.
- classic_revolves_seams_are_round checks each seam's reach as well as
its join, and covers a gradient.
- The Wireframe edge takes seam_stroke (the same stroke it built by hand).
- Docs: which seams went from miter to round and which already were;
the white-light difference from the 2026-10-17 comparison is expected,
not measured; the 3D area rows record the change; the performance note
says its measurement predates the Classic Rotate and Revolve paths.
Each 3D facet is stroked with a narrow seam of its own paint (0.05 to
0.75 pt; Revolve's is always 0.75 pt) so neighboring facets meet without
an antialiasing hairline. In Extrude & Bevel, Inflate and Rotate under a
white light, and in every face of the 3D (Classic) effects (Extrude &
Bevel, Rotate and Revolve (Classic); shaded, No Shading, gradient and
pattern alike), that seam kept the default Miter Join with its limit
of 10. Revolve's seams and the colored-light seams
were already round. A facet seen almost edge-on is a sharp sliver, and
its mitered seam reached up to ten times its half-width past the facet's
tip: thorns of up to 3.75 pt past the solid, along the tops of type seen
tilted and at every edge-on bevel facet.
#2706 (multiple lights) deliberately kept white-light seam joins as they
were, so that legacy white-light output stayed byte-identical to main
(its comment "Preserve existing white-light paints, alpha composition and
seam joins exactly", and four PNGs compared byte for byte). That kept
the thorns too. This change reverses that one part on purpose: the
paints and alpha composition stay exactly as #2706 left them; only the
join changes.
- Outputs change, the document model doesn't. Exports draw the new
joins (SVG writes stroke-linejoin="round", PDF and .ai draw round
joins), and Expand Appearance writes round seams into the document.
But nothing a document stores selects the join, and the format is
unchanged, so there is no version gate: an old file drawn now simply
has no thorns.
- Round joins. Projected facets rarely have right-angle corners (a
square seen at an angle is a parallelogram with acute corners, and an
exact 90° corner sits at a √2 limit), and round is what the seams of
colored lights and Revolve already draw. The cost: where a facet has
no neighbor (Rotate's plane, every silhouette corner) its convex
corners are drawn rounded by up to 0.375 pt instead of sharp.
Alternatives weighed and not taken: a Miter Join with a limit near √2
at every seam, the composed clip included, which would bevel slivers
but chamfer most projected corners as well; and seaming only the edges
facets share, or clipping facets to their union as solid_surface
does, which would keep every outer corner sharp but means a new
geometry pass for every 3D effect. Round is the smallest change that
matches the seams already drawn.
- A seam no longer reaches past its facet by more than half its width,
so the art's visual bounds shrink by up to 3.375 pt where a thorn
stood (10 × 0.375 less the 0.375 a round seam still reaches).
White-light output is no longer byte-identical to #2706's comparison;
docs/3d-lighting-performance.md says so.
Every seam stroke is made by lighting::seam_stroke. The colored clip in
composed_art already outlined its seam with round joins and is
unchanged. Tests: every seam of Extrude & Bevel, Extrude & Bevel (Classic, each
branch), Rotate (Classic), Inflate and Rotate, under white and colored
light, has round joins and reaches no more than half its width past its
face, at views that make a sliver; Revolve (Classic)'s seams are round
on each surface; a mitered seam fails them, and so does the legacy
white-light Inflate test, which now expects Round.
The Materials tab of the 3D and Materials panel lists the document's
graphics (symbols). Add as Single Graphic keeps the selected art as a
new symbol (threeD.addGraphic), and clicking a thumbnail maps it onto
the front of each selected object's 3D effect (threeD.mapGraphic) in
one undo step. The tab lists the mapped graphics with Face, X, Y, Scale
and Rotation and Remove Graphic, and a handle on the artboard drags a
graphic over its face.
The graphics are the new `graphics` parameter of threeD.extrude and
threeD.rotate: drawn on Extrude & Bevel's front and back caps and on
the Plane type, turned, foreshortened, twisted and tapered with the
face, shaded with its light and clipped to it. Symbol renames follow
into the graphics, and Select All Unused counts a symbol a graphic uses.
Docs: docs/mcp.md, docs/three-d.md, docs/effects-parity.md.
Effect › 3D and Materials › 3D (Classic) › Rotate (Classic)… turns every
fill and stroke as one flat plane, as Rotate does, and shades it with the
classic No Shading or Diffuse surface.
- `effect.apply` with `threeD.classicRotate`: the Position rotation and
Perspective, `surface` (`none` or `diffuse`), the classic lights,
Ambient Light, Blend Steps and Shading Color. It has no highlight, no
Draw Hidden Faces and no shadow.
- The dialog shows Position on the Rotation tab and the surface and
lights on the Lighting tab, with no Object tab.
- Groups and layers turn about one shared center, and the effect also
goes on a fill or stroke, as Rotate's does.
- `effect.lightingPreset` refuses it, as it refuses the other classic
3D effects.
- Unknown parameters, numbers out of range, bad flags, a surface other
than No Shading or Diffuse and bad shading colors are refused with an
error.
Effect › 3D and Materials › 3D (Classic) › Revolve (Classic)… sweeps the
profile round a vertical axis, as Revolve does, and draws every face with
the Wireframe, No Shading, Diffuse and Plastic surfaces of Extrude & Bevel
(Classic).
- `effect.apply` with `threeD.classicRevolve`: Angle (0 to 360), Cap,
Offset (0 to 1000 pt) from the left or right edge of the profile's
bounds, the Position rotation and Perspective, and the classic lights,
Ambient Light, highlight, Blend Steps and Shading Color.
- Groups and layers revolve about one shared axis, and the effect also
goes on a fill or stroke, as Revolve's does.
- `effect.lightingPreset` refuses it, as it refuses Extrude & Bevel
(Classic).
- Revolve faces carry their view-space normal, and
`three_d::revolve_facets` hands them to the classic surface code.
- Unknown parameters, numbers out of range and bad flags, edges,
surfaces and colors are refused with an error.
Window > 3D and Materials > Quick Actions > Expand as Wireframes, and the
command effect.expandAsWireframes, replace each selected object that has a
visible 3D effect (Extrude & Bevel, Extrude & Bevel (Classic), Revolve,
Inflate or Rotate) with a group of paths: the edges of the faces the effect
draws for the object as it is turned and projected now.
- Each edge appears once. Edges that meet end to end form one path, closed
where it comes back to its start, and curved edges stay curves. Geometry
effects after the 3D effect reshape the edges as they reshape the drawn
surface.
- The paths have a 0.5 pt black stroke with round joins and no fill. The
group keeps the object's id, name, transparency, attributes, slice and
text wrap, and is selected. A layer stays a layer holding the edges.
- It is one undo step. Nothing selected, no visible 3D effect, a solid that
can't be built or is drawn as its source art, or more than 1,000,000 edges
in one object is an error, and the document does not change.
Docs: docs/mcp.md, docs/three-d.md, docs/effects-parity.md,
docs/target-app-parity.md.
Fixes#6354
Each of the fifteen Warp styles now bends the bounds as one Bézier patch.
The style sets the patch's control points from the bend and the size of
the bounds, the horizontal distortion scales each column of control
points about its middle, and the vertical distortion scales each row.
The Warp effects and warp envelopes share the map (`WarpNet`). Content
with no width or no height takes the middle of the patch along that
side.
A warp carries the map it draws with as `version`. New warps, the
built-in graphic styles' Warps and warps opened from .ai files get 1.
Warps in .vectorcraft documents saved before the version existed read
as 0 and keep the earlier map, so those documents keep their look.
Edits keep a warp's version, and Warp Options editing several objects
keeps each one's own. effect.apply, effect.setParams and the warp
envelope commands take `version` 0 or 1 (`1.0` counts as 1) and refuse
any other value. An .ai file holds a warp's settings and not its
version, so a version 0 warp saved to .ai opens again with version 1.
The .ai writer compares a style's settings without the version, so
saved warps still export as editable effects.
Docs: docs/mcp.md (Envelopes), docs/effects-parity.md (Warp),
docs/target-app-parity.md.
Revolve, Extrude & Bevel, Inflate and Rotate take a Shadows switch on the
Lighting tab, with Position (Behind Object or Below Object), Distance from
Object (0 to 100%) and Shadow Bounds (10 to 400%), saved in the effect as
shadow, shadowPosition, shadowDistance and shadowBounds.
With shadows on, the first light casts a hard-edged vector shadow of the
solid: every face of every solid of the object projected along the light
onto a plane behind the object (square to the view) or below it (square to
its own vertical axis and turned with it), filled black with the nonzero
rule at 50% times the opacity of the art that casts it, in that art's
blending mode, and drawn behind the solids. Distance moves the plane away
by a share of the object's largest size; Bounds ends the plane at a square
about the foot of the object's center, four times that size across at
100%. No shadow is drawn while Shading is off, when the first light's
intensity is 0, or when it does not reach the plane. A member's opacity
mask and blending mode apply to the part of the shadow it casts. A shadow
is cast from at most 327,680 faces; past that, commands are refused and a
loaded file draws the source path. The canvas, SVG and PDF exports draw the
shadow, and Expand Appearance keeps it as a path. Values out of range are
refused before the document changes.
Docs: docs/three-d.md, docs/mcp.md, docs/effects-parity.md and the
docs/target-app-parity.md evidence list.
A clipping group, a group with a fill or stroke of its own and a group
whose type is kept as type still copy each member in place, and a
group's copies leave out its guides.
A group with a visible member that carries a geometry, Pathfinder or 3D effect, also in an opacity mask, keeps its previous copies. Copies stop at the budget with what each copy's own effects make, and a group's copies count the art of opacity masks.
The PDF and SVG tests for a group's image copies now expect the original on top.
A Transform effect with copies on a group copied each member on its own,
so one member's copies lay over the fills of the next member. Each copy
is now a whole group, the original on top and each copy below the one
before. A path's copies follow the same order. Guides are not copied,
and the copies stop at the node limit. A group with its own fill or
stroke, a clipping group and live type keep their previous copies.