Commit Graph
145 Commits
Author SHA1 Message Date
BFlat 1a02e35e46 Merge pull request #8505 from dotCooCoo/perf/cut-direct-batch-remove
Cut: direct-selection Cut removes whole and emptied paths in one pass per parent
2026-11-18 13:02:42 +07:00
dotCooCoo 385b4c5e82 Cut: direct-selection Cut removes whole and emptied paths in one pass per parent
Cut with direct-selected anchors or segments removed each object selected
whole, and each path it left with no segment, with its own remove. Every
removal shifted the siblings after it, so later lookups walked the
document's tree again. With 2,000 roots removed whole, the old loop
walked the tree 10,005 times.

These removals now go through the same batch that already places the
surviving pieces, which rebuilds the children of each layer or group
once, and compound paths left with no members are removed after it. A
compound path left with one member stays a compound path. The document,
the selection, the clipboard and the undo step are the same as before.

With 2,000 of 10,000 squares on one layer selected whole and two anchors
of another picked, Cut walks the tree 8 times instead of 10,005 and
takes a median of 11 ms of CPU time instead of 573 ms (release build on
Linux, seven alternating runs in one process).
2026-11-17 17:49:21 -08:00
dotCooCoo 6e44c63cc3 Undo: undo and redo keep the settings changed without an undo step
Undo and redo put back the whole document a step stored, so settings
that change without an undo step went back with it. Undoing any
earlier edit turned the perspective grid's Lock Grid off again, turned
its Snap to Grid back on, showed a hidden grid and switched the active
plane back. It also reset the grid from Gridline every and
Subdivisions, the export settings assets.settings.set stores, and the
current brush and symbol.

Each undo step now also records these settings as the step left them.
Undo and redo compare that record with the document they bring back:
a setting the step did not change stays as it is now, and a setting
the step changed comes back with the step. So undoing a perspective
grid preset still hides the grid the preset showed, and undoing a grid
definition that locked the grid unlocks it. The point Automatic Plane
Positioning holds still follows the steps, and is let go when the
active plane kept is another one.
2026-11-17 08:40:50 -08:00
dotCooCoo 68dbb1e6e4 Select: Same and Select by Color read each object's parent from the walk
Select > Same, Select by Color (select.color) and document.find looked up
the parent of every object they checked by its id, through
Document::parent_of and Document::node, to tell members of a compound
path and faces of a Live Paint group from other objects. The walk
already stands on that parent, so it now hands it to the check with the
object. walk_selectable keeps its signature and visits the same objects
in the same order.

The selected objects, their order and the count reply are the same as
before, and so is the Reselect state of Select > Same. Tests compare the
walk and the parents it hands out with the old walk and
Document::parent_of, and the results of six Same commands and
select.color with the old per-id loop, in four isolation scopes, from
rectangles at the top level, in a group and in a sublayer, compound path
members, Live Paint faces and a compound path. In a damaged document
that holds an id twice, the parent read is the one that holds the
object being checked.

The gain shows on large documents. With 220,482 objects, the search of
Select > Same > Fill Color takes a median of 24 ms of CPU time instead
of 83 ms, and of Stroke Color 22 ms instead of 60 ms (release build on
Linux, seven alternating runs of both loops in one process; an ignored
test, select_same_perf, times them).
2026-11-16 15:18:22 -08:00
dotCooCoo 33e7a8893b Cut: take the cut objects out of the selection in one pass
Clear with `ids`, which Cut uses for the objects it copied, removed each
id from the selection with its own scan of the selected objects. It now
calls Selection::remove_all once, which gives the same selection.

With 50,000 objects selected and all of them cut, the selection step
takes 5.5 ms instead of 572 ms (release build, median of 7 wall-clock
runs, measured while other builds were running). The new tests compare
the result with removing each id in turn, including Undo and Redo, and
an ignored benchmark times both.
2026-11-16 07:25:45 -08:00
FredApps d2b8ebfd95 Merge origin/main into feat/cutover-remaining-codecs 2026-11-16 01:57:11 +01:00
dotCooCoo 24867f7827 Paste: legend labels in a pie's wedges follow wedges that take the document's swatch
When a pasted pie's wedge links a global swatch that the document gives
another color (swatchConflict "merge", the default), the wedge takes the
document's color. Its legend label kept the contrast it had in the copy,
so a wedge that turned dark could show a black label, and one that
turned light a white label, until the pie was drawn again.

Pasting now reads which wedges show a dark fill before the copy is
linked to the document's swatches. A pie whose wedges change darkness
gets the legend label contrast a redraw sets: white on a dark wedge,
black on a light one. Pies whose legend labels have a fill of their own
keep it. This applies to every paste command, Paste without Formatting
included, and to pies inside opacity masks.
2026-11-15 08:53:31 -08:00
Dylan M. Taylor e1d781f787 Merge remote-tracking branch 'origin/main' into feat/cutover-remaining-codecs
# Conflicts:
#	Cargo.toml
#	crates/pdf/src/file_info.rs
#	crates/render/Cargo.toml
#	crates/render/src/encode/tests_psd.rs
#	crates/render/src/encode/tests_tiff.rs
#	crates/render/src/paint.rs
#	crates/svg/src/import/files.rs
#	crates/trace/src/opaque.rs
#	crates/trace/src/raster.rs
#	crates/trace/src/tests.rs
2026-11-14 21:26:12 +00:00
Dylan M. Taylor 1d6c4dcd14 chore(codecs): cut over remaining image/tiff/ccitt codecs to craft-libs 2026-11-14 21:19:30 +00:00
dotCooCoo fbf2bee87b MCP: a malformed artboard or history index is reported as not a whole number
The artboard commands that take `index` or `indices`, a replayed
`selectedArtboards`, the artboard Align and Distribute commands
(`artboard`, `activeArtboard`), `edit.newDocumentFromState` and Paste in
Place, in Front and in Back now report a value that is not a whole number
with "`<key>` must be a whole number" or "`<key>` must contain whole
numbers", naming the key. A whole number that names no artboard or state
keeps `no such artboard`, `no history state N` or the paste range message.

- A null artboard `index` is `missing index`, as for other required keys.
- An `indices` value that is not a list, an empty list and a malformed
  entry each have their own message naming the key.
- `edit.newDocumentFromState` still uses the current state for an omitted
  or null `index`.
- Paste checks the form of both `artboard` and `artboards` before either
  range.

Docs: docs/mcp.md, docs/target-app-parity.md.
2026-11-14 07:57:00 -08:00
BFlat edb228ac33 Merge pull request #7402 from dotCooCoo/fix/more-int-param-wrong-type
MCP: path, type, panel, library, style and ruler indices refuse a wrong-type value
2026-11-14 16:54:34 +07:00
dotCooCoo 531fad0532 MCP: path, type, panel, library, style and ruler indices refuse a wrong-type value
A required index given as something other than a whole number of 0 or
more, such as "3", 2.5, -1 or true, was reported as missing: `anchor` of
path.setHandle, path.moveAnchor and text.setPathHandle, `segment` of
path.insertAnchor, and `to` of artboard.reorder, library.moveGroup and
graphicStyle.move. Each now refuses it with "`anchor` must be a whole
number", naming the key; left out or null, it is still missing.

An optional `subpath` of path.appendAnchor, path.close and path.reverse
given that way was read as left out, so the command extended, closed or
reversed the default subpath (path.reverse reversed every subpath). The
`artboard` of the ruler origin commands answered "index out of range"
for such a value and for null. Both now refuse such a value with the
same message and change nothing. A null `artboard` is artboard 0, as one
left out is; a whole number past the artboards is still out of range.
2026-11-13 19:08:16 -08:00
dotCooCoo 78ce56d021 MCP: an integer given as a string or a fraction is refused as the wrong type, not reported as missing
A command that needs a whole number of 0 or more, such as `index` of
`appearance.setItem`, `anchor` of `path.removeAnchor` and
`addon.pen.removePoint`, `sourceDocument` of `edit.dropSelection`, `index`
of `document.activate` and `to` of `document.move`, answered "missing
integer `index`" (or "missing index") both when the key was left out and
when it was given as a value that is not a whole number of 0 or more, such
as "3", 2.5, -1 or true. A value that is given but is not one is now
refused with "`index` must be a whole number", the message object ids
already use. A key left out or given as null is still missing, and an
optional index such as `subpath` keeps its default. Neither error changes
the document or records an undo step.

Docs: docs/mcp.md, docs/target-app-parity.md.
2026-11-13 18:02:42 -08:00
BFlat f97e81afd7 Merge pull request #7159 from dotCooCoo/fix/delete-cut-per-subpath-anchors
Paths: Delete, Cut and Cut Path read each subpath's own selected anchors
2026-11-13 23:14:36 +07:00
dotCooCoo fb9160be7a Paths: Delete, Cut and Cut Path read each subpath's own selected anchors
Clear, path.deleteAnchors, Cut, Copy and Cut Path scanned every selected
anchor or segment of a path once for each of its subpaths, so a path with
thousands of subpaths took time that grew with the square of their count.
The selection sets are ordered by subpath, so a new helper, subpath_refs,
reads one subpath's entries with a range lookup instead. The results are
unchanged.

With one selected interior anchor on each of 8,000 open subpaths of one
path, Clear took a median of 74 ms of thread CPU time before and 3 ms
after (release build, five runs each; the timings are noisy because the
CPU was shared and loaded).

Tests in delete_path_pieces.rs check exact surviving subpaths and their
order for anchor and segment selections across open and closed subpaths,
an untouched subpath, references to missing subpaths and indexes, one
Undo/Redo step and a second Clear, and Cut Path on several subpaths.
2026-11-13 06:58:01 -08:00
dotCooCoo f918c91c13 Edit: settling an interaction keeps the warning of the preview it applies
With Real-time Drawing off, a command that ends a drag first (Undo, Redo,
Clear History, a plug-in command and the others) applies the drag's
deferred preview, but dropped the warning that preview gave, which
releasing the drag shows in the status bar.

- The applied preview's warning is now kept while a top-level command or
  the tool's actions run. A command's result carries it as
  `previewWarning`, and as `warning` when the command has no warning of
  its own, so the status bar shows it.
- Typing kept as its own step when a tool's drag begins, or when Cmd
  lends the Selection tool, shows the warning in the status bar.
- The Cmd-lend path no longer ignores an error from keeping the typing.

Docs: docs/mcp.md (undo/redo row), docs/target-app-parity.md.
2026-11-13 04:36:38 -08:00
dotCooCoo d8b6f4cd02 Layers: Paste Remembers Layers puts art back into the sublayer it was copied from
Copy now remembers the whole chain of layers around each object, not only
the name of the nearest one. With Paste Remembers Layers on:

- In the same document, art goes back into the sublayer it came from while
  that sublayer exists, even after it was moved, so two sublayers of the
  same name in different layers stay apart. A deleted sublayer is made
  again inside the layer that held it.
- In another document, the sublayer and the layers around it are matched
  by name from the top level down; of repeated names, the topmost chain
  that matches the most names wins, a shown and unlocked one first. A
  missing sublayer is made inside its layer, and a missing layer on top
  with the sublayer inside it, in the paste's undo step.
- When the matched layer, or a layer around it, is hidden or locked, the
  paste fails with "the target layer is locked or hidden" and nothing is
  pasted, instead of putting art in a hidden layer or making a second
  layer of the same name.
2026-11-12 21:02:59 -08:00
dotCooCoo bc97a8f897 New Document: profiles bring their color profiles and link base
Follow-up to #6887.

- file.new installs the color profiles a New Document profile's file
  carries when they are missing, as document.open does, so the new
  document's assigned profile draws and a save embeds it. A color
  profile that can't be used is listed in the result's `warnings` and
  shown in the status bar.
- The new document's links find their files through relative paths
  from the profile's file (`links_from`), as
  edit.newDocumentFromState sets it.
- When the read roots leave out the profiles folder, profileError's
  reason no longer names the folder's path.
2026-11-12 17:22:28 -08:00
BFlat b4505a76de Merge pull request #6887 from dotCooCoo/feat/new-document-profiles
New Document: each preset category starts documents from its own profile
2026-11-13 06:11:41 +07:00
dotCooCoo 7907bae6c3 Merge main into feat/new-document-profiles 2026-11-12 13:42:10 -08:00
dotCooCoo a670c3072b MCP: document.json names linked JavaScript files outside the read roots by file name
With automation read roots in force, document.json returned each entry of
svg_scripts unchanged, so a JavaScript file linked from outside the read
roots kept its full path in the reply. The reply copy now names such a
file by its file name alone. An entry given as a URL is kept, and the
stored document is not changed.
2026-11-12 13:18:17 -08:00
dotCooCoo 9371a9ea51 Merge main into fix/read-roots-document-replies 2026-11-12 10:27:20 -08:00
dotCooCoo 22a19db2cd Merge main into feat/new-document-profiles 2026-11-12 09:29:46 -08:00
dotCooCoo 2d66758ce4 MCP: document.json checks brush art and relative link paths against the read roots
Under --automation-read-root, document.json names a linked image or
placed file in a stored brush's art outside the read roots by its file
name alone, as it does in the layers. A stored brush entry that does not
read as a brush is left out of the reply, and a stored brush library
that is not a list becomes an empty one. A link whose file is inside the
read roots loses its stored relative path when that path leads outside
them, from the folder of the file the document was read from or from the
document's own folder.
2026-11-12 09:19:15 -08:00
dotCooCoo d3b18465f9 New Document: file.new and artboard.new take the same largest artboard side
file.new refused a side over 163,830 pt, while artboard.new took larger
artboards. Both now take each side more than 0 and at most 3,999,856 pt:
the 4,000,000 pt the canvas reaches from the origin, less a 72 pt bleed
on both sides. A side outside that range is refused with an error that
names the limit in points and, when the document's units are not points,
in those units, rounded down so the value shown is accepted.

artboard.new now refuses a supplied width or height of 0 or less instead
of making a 1 pt side, and refuses a size taken from a larger artboard.
Saved and Recent presets are read with sides up to the new limit.

Follows #6643.
2026-11-12 07:45:32 -08:00
dotCooCoo e29f5e51a0 New Document: each preset category starts documents from its own profile
Each built-in category (Mobile, Web, Print, Film & Video, Art &
Illustration, Branding, Social) has a New Document profile, a native
document in the New Document Profiles folder next to the preferences.
file.new copies the profile's swatches, graphic styles, brushes, symbols,
patterns, character and paragraph styles, rulers, Document Setup options,
assigned color profiles and print settings into the new document. The
preset's size, units, artboards, bleed, background, color mode and
resolution still apply, and the profile's art and layers are not copied.

- file.newProfiles lists the profiles, file.newProfiles.edit opens one
  as a document (writing the shipped profile first), and
  file.newProfiles.reset deletes its file. file.new takes `profile`.
- Saved and Recent presets keep the profile of the preset they came from.
- A profile that cannot be read, is larger than 64 MiB or is not a native
  document leaves the defaults, and file.new reports it in profileError.
- New Document has a Manage Profiles pop-up with Edit and Reset.

Docs: docs/mcp.md, docs/target-app-parity.md.
2026-11-12 06:00:40 -08:00
dotCooCoo 511ecdb6d3 Merge main into fix/read-roots-document-replies 2026-11-12 05:53:13 -08:00
dotCooCoo 46ce6364c5 MCP: document.inspect and document.json leave out paths outside a confined client's read roots
Under --automation-read-root, document.inspect gives `path` as null when
the document's file is outside the read roots. document.json names a
linked image or placed file outside them by its file name alone, without
its relative path, size or date, in the layers, symbols, graph designs,
patterns, the pattern being edited and opacity masks. It also names a
data set's image value outside them by its file name, and leaves the
Export for Screens folder outside them out of export_settings. The
document is not changed, and unconfined callers see the same replies as
before.
2026-11-11 23:36:11 -08:00
dotCooCoo 19d2778337 Merge main into fix/malformed-id-not-missing 2026-11-11 23:31:01 -08:00
BFlat a8ac772c53 Merge pull request #6753 from dotCooCoo/feat/pixel-align-new-objects
Transform: Align New Objects to Pixel Grid makes new paths pixel-aligned
2026-11-12 12:41:07 +07:00
dotCooCoo 7e071feb4d Merge main into feat/pixel-align-new-objects 2026-11-11 18:57:23 -08:00
dotCooCoo e0e4d7e8d7 Merge main into fix/malformed-id-not-missing 2026-11-11 18:38:43 -08:00
dotCooCoo fabc28370f Merge main into fix/plugin-call-reprepare-test 2026-11-11 18:29:37 -08:00
BFlat 36fa7c561a Merge pull request #6749 from dotCooCoo/fix/edit-guide-params-reject-wrong-types
Commands: Edit, guide and slice params of the wrong type are refused
2026-11-12 09:22:02 +07:00
dotCooCoo 922c1fcae5 Commands: Edit, guide and slice params of the wrong type are refused
These commands read optional numbers and flags with f64_or and bool_or,
so a value such as "10" or "yes" ran the command with the default. They
now return an error and leave the document, the selection and the undo
history as they were. Omitting a key or giving null behaves as before.

- edit.duplicate, edit.paste, guide.move, object.slice.duplicate: dx, dy
- guide.move: copy
- document.node: summary
- edit.undoGroup.end: cancel
- guide.add: vertical
- guide.select, object.slice.select: toggle
- select.editSaved: delete; newName must be a string
- select.save: name must be a string
- file.close: index must be a non-negative integer
2026-11-11 17:45:42 -08:00
dotCooCoo 93ccc6fbfa Transform: Align New Objects to Pixel Grid makes new paths pixel-aligned
Document Setup gains alignNewObjectsToPixelGrid. When it is on, every
path or compound path drawn in the document (shape tools, Pen,
Curvature, Pencil, Paintbrush, Blob Brush, grids, flares and add-on
shapes) gets the pixel-aligned property and snaps in the same undo
step. Text, paste, duplicate, Place and import are not affected.

- The Transform panel menu has an Align New Objects to Pixel Grid
  item for the active document.
- New Document's Advanced Options has the checkbox; the Mobile and Web
  presets turn it on, other presets and older saved presets leave it
  off, and file.new, Save Preset and Recent keep it.
- The setting is saved with the document only when it is on.

https://helpx.adobe.com/illustrator/desktop/get-started/learn-the-basics/pixel-preview-mode-for-web-graphics.html

Docs: docs/mcp.md, docs/target-app-parity.md, docs/ui-parity.md.
2026-11-11 17:41:21 -08:00
dotCooCoo 9998f020ac Edit: Paste in Place, in Front and in Back put a copy on each selected artboard
With the Artboard tool selecting several artboards, Paste in Place, Paste
in Front and Paste in Back put a copy of the copied art on each, where it
was on the artboard it was copied from, in one undo step. The three
commands take `artboards: [index...]`; the app passes the Artboard tool's
selection there, and without it the engine uses that selection while the
tool is chosen and records it in the journal. Art copied from no artboard
keeps its place on the first artboard and its offset to it on the others.
Copied artboards still paste once, where they were.

An `artboard` or `artboards` value that is not an artboard index of the
document, a repeated index or an empty list is now an error, and nothing
is pasted. An out-of-range `artboard` used to paste the art where it was.
A batch keeps the `artboards` a paste step names, and a paste step that
names neither pastes on the Artboard tool's selection while that tool is
chosen with several artboards selected.

Help page: https://helpx.adobe.com/illustrator/desktop/create-manage-artboards/organize-manage-artboards/cut-copy-and-paste-artboards.html
2026-11-11 17:00:44 -08:00
dotCooCoo f3cff033ca Edit: a command that ends a drag keeps its unapplied preview
With Real-time Drawing off, a tool stores its latest preview and applies
it only when the drag is released. A command that ends the drag first
(Undo, Redo, a filter that calls commands, a plug-in command that calls
commands, and the other callers of settle_interaction) committed the
interaction without that preview, so the drag was dropped: Undo then
took back the step before it, and a calling filter was given the
objects where they were before the drag.

settle_interaction now applies such a preview first, as the tool's own
commit does, and cancels the drag when the preview fails. The re-prepare
of a calling filter's input after settling is now reached, and tests
cover it at both plugin.run and plugin.<plug-in>.<command>.
2026-11-11 14:15:22 -08:00
dotCooCoo 5c2e182388 MCP: a malformed object id is refused as such, not reported as missing
Commands that need an object id read it with `id_param`, which returns
None for a value that is not a non-negative integer, so `{"id": "5"}` or
`{"id": -1}` was refused with "missing id". They now read it with
`object_param`, which refuses such a value with "`id` must be a whole
number", naming the key. This covers `document.node`, the `path.*` anchor
and handle commands, the `text.*` range and path commands, the mesh,
envelope and slice point commands, `layer.target`, `layer.move`,
`node.move`, `select.magicWand`, and the `source`, `target`, `group` and
`path` keys of `appearance.transfer`, `appearance.copyFrom`, the
`livePaint.*` commands and `text.createInPath`.

The optional `group` of `livePaint.fill` and `parent` of `node.move` are
refused the same way when given. Before, a malformed `parent` moved the
object to the top level and a malformed `group` fell back to the
selection.
2026-11-11 12:47:49 -08:00
dotCooCoo 5ac7d97d85 Guides: ruler guides are document objects on their layers
Ruler guides were a list kept beside the layers. Each guide is now an
object of its layer or sublayer, always directly in it and above the
layer's art. These behave as on main:

- Guides draw on screen only. Exports (SVG, PDF, PNG, PSD), Fit All,
  Select All, the art bounds, clicks and marquees, and a layer's
  Pathfinder and Transform effects leave them out. The Layers panel
  lists them as guide rows of their layer, the highest guide.list
  index first.
- Deleting a layer deletes its guides, and merging layers keeps their
  guides in the merged layer.
- The guide commands number guides as guide.list does, in the order
  they were made.

New: each guide takes an id from the document's object ids. An object
command given a guide's id fails with an error, and node.move cannot
put a guide into a group or out of its layers. A guide made while an
opacity mask, a symbol or a pattern is edited moves to the top
visible, unlocked layer when editing ends.

File format: native files still save the guides in the document's
guides list, in every file version, so older builds read them. Each
entry may now also carry the guide's id, name, locked and hidden
flags; older builds ignore those fields. Opening a file puts each
saved guide on its layer (on the top visible, unlocked layer when the
file names none or a layer it does not have), and each saved guide
counts against the object limit for opening a file. A ruler guide node
that a file holds below a layer's art moves up to the layer's guides,
and one anywhere else (in a group or another object, beside the
layers, or in a symbol) is removed. Ruler guides read from an .ai file
become guide objects on the layer they were on, numbered in the order
the file lists them.
2026-11-11 09:52:28 -08:00
dotCooCoo e0e361a834 Effects: a pasted SVG filter avoids brush effect names and is refused with no free name
Follows #6592. Paste now also skips the names that effects in the
document's brush art use when it picks a free name for a pasted SVG
filter. When no free name keeps the filter within the 64 KB limit (a
one-letter name at the limit with every free letter and digit taken),
the paste is refused instead of keeping the name of the document's
filter. Clipboard::import_into and import_text_styles return a Result,
and their callers pass the error on before the document changes.
2026-11-11 06:08:58 -08:00
dotCooCoo c92dad3838 Edit: a copied compound member takes the compound's graphic style link
Make Compound Path leaves each member's graphic style id in place. A
member copied or cut on its own took the compound's appearance but kept
that old id, so the clipboard carried an unrelated style and the pasted
path was linked to a style that did not match its look.

The copied member or piece now takes the compound's link while it has
that style's look, and no link otherwise (no style on the compound, or
a gradient pinned to the compound's bounds). It also takes the
compound's knockout setting with the rest of its transparency.
2026-11-10 13:28:28 -08:00
dotCooCoo 668b3fa3d7 Edit: a copied member keeps its compound's gradient, and Clear leaves no empty compound
A compound member copied or cut on its own now keeps the compound's
gradient fitted where it was: an unplaced gradient is pinned to the
compound's bounds, measured once per compound.

Clear that deletes every anchor or segment of every member of a compound
path now removes the compound too, as Cut does, instead of leaving an
empty compound in the layer.

The edit.copy and edit.clear descriptions, docs/mcp.md and the progress
line now say that selecting the compound copies it whole, that isolation
mode takes each member as itself, and how a compound of one and Paste in
Front with the copied member still selected behave.
2026-11-10 12:25:30 -08:00
dotCooCoo 1f8423c2a9 Edit: Copy and Cut of a whole compound member take only that member
A compound-path member selected on its own, whole with Direct Selection
or with Group Selection, is now copied as an ordinary path instead of
promoting the selection to its compound. Cut removes the same objects
Copy takes, so the other members stay a compound path, a compound of
one included. The compound is still taken whole when every member is
selected whole, or when the compound itself is selected.

A copied member or piece takes the compound's paint, opacity, blending
mode, opacity mask, pixel alignment and fill rule.

Tests that pinned the earlier rule from #786 now check the new one.
2026-11-10 11:26:35 -08:00
dotCooCoo cb086ef1b7 Part of #6361: Cut takes direct-selected anchors out of the path
With anchors picked with Direct Selection, Edit > Cut removed only the
segments between them, so the picked anchors stayed in the path. Cut now
removes picked anchors and the segments attached to them from a path or
a compound path's member, as Clear does. Picked segments still lose only
those segments. When a path has picked segments, Copy and Cut leave out
anchors picked on its other contours, as Clear does.

Docs: docs/target-app-parity.md.
2026-11-09 17:03:43 -08:00
ruchirguitarandCursor 3deac491ca M2.1: merge current main and keep path-deletion evidence (#3380)
Co-authored-by: Cursor <cursoragent@cursor.com>
2026-11-09 09:03:17 +05:30
ruchirguitarandCursor 46cc28b299 M2.1: merge current main and keep path-deletion evidence (#3380)
Co-authored-by: Cursor <cursoragent@cursor.com>
2026-11-09 04:09:05 +05:30
dotCooCoo a2884baa33 Merge main into fix/edit-copy-artboard-route 2026-11-08 12:35:20 -08:00
ruchirguitar 2c80836bd5 M2.1: merge main and preserve path-deletion evidence (#3380) 2026-11-09 01:47:48 +05:30
dotCooCoo faa7b8ef6a Links: a missing linked file keeps its relative folder when a moved document is saved
Squashed from #6231 onto main.
2026-11-09 03:08:23 +07:00