The Paragraph panel's Mojikumi Set lists None, YakumonoHankaku,
GyomatsuYakumonoHankaku, GyomatsuYakumonoZenkaku and YakumonoZenkaku,
then Line-end Punctuation Half Width, and text.setFormat {mojikumi}
takes yakumonoHankaku, gyomatsuYakumonoHankaku, gyomatsuYakumonoZenkaku
and yakumonoZenkaku besides none and lineEndHalf.
The spacing of each set is VectorCraft's own rule, built on the help
page's one-line description of each set:
- YakumonoHankaku sets every bracket, comma and full stop half width,
takes a quarter em off each side of a middle dot, and puts a quarter
em between Japanese and Latin letters or digits.
- GyomatsuYakumonoHankaku keeps punctuation full width inside a line,
sets an opening bracket starting a line flush and a closing mark
ending it half width, and takes the quarter em after a middle dot
ending a line off.
- GyomatsuYakumonoZenkaku keeps punctuation full width and adds the
quarter em between Japanese and Latin text.
- YakumonoZenkaku sets characters as None does.
Both composers and vertical type measure each line as it is set. A
right-to-left paragraph, whose line ends are measured untrimmed, also
draws them untrimmed, and a right-to-left line that ends between a
Japanese and a Latin character is measured without the quarter em the
set adds there. With a Desired glyph scaling other than 100%, the
space a set takes off before an opening bracket or middle dot, and the
Japanese-Latin space recorded at a line's end, scale with the glyph.
The sets save with the document and paragraph styles; new type and
Reset Panel keep Line-end Punctuation Half Width. SVG export lays type
with middle dots out again for its positioned spans. A .ai save
reports a paragraph with one of the new sets as left out.
Docs: docs/mcp.md, docs/target-app-parity.md, docs/type-parity.md,
docs/gaps.md.
A glyph that justification widens to fill the line keeps its Insert Aki
before it at its width, and its own width, which ligature carets stand
in, now starts where the glyph is drawn. Optical kerning measures a pair
from the letter of a cluster rather than from a combining mark whose
advance holds the cluster's Aki.
The SVG test also checks centered and right-aligned lines with Insert Aki.
Single Word Justification adds no space inside an inseparable pair. A
right-to-left line draws the second half's cluster before the first half,
with the cluster's glyphs in logical order, so a dash followed by a
combining mark puts the mark next to the first dash. The pair is now found
from the two neighboring clusters instead of neighboring glyph indices.
Paragraph panel menu > Bunri-Kinshi (with the East Asian options) and
text.setFormat {bunriKinshi} turn it on per paragraph. A line then
never breaks inside two em dashes, two horizontal ellipses, two two-dot
leaders or the two halves of a vertical kana repeat mark, the pairs W3C
JLREQ lists for class cl-08 (https://www.w3.org/TR/jlreq/#cl-08), nor
inside a chain of em dashes. Both composers, vertical type, Kinsoku
Shori Type, hyphenation and No Break follow it, and a pair wider than
the line stays whole on it. Justification and letter spacing add no
space inside a pair.
The setting works only with a Kinsoku Set: with Kinsoku Set None the
paragraph keeps the value without effect and the menu item is
unavailable. It is off by default, saved with the paragraph only when
on, carried by paragraph styles (Paragraph Style Options > East Asian
Composition Settings), and turned off by Reset Panel. A value that is
not true or false is refused. The .ai editing data has no field for it,
so saving reports a paragraph with it on and a pair in it as left out.
Docs: docs/mcp.md, docs/target-app-parity.md.
Characters take two new attributes, `akiLeft` and `akiRight`: space
before and after each character in reading order, in thousandths of an
em from 0 to 1000, measured as tracking is. `text.setFormat`,
`text.setRangeStyle` and character styles set them; values that are not
numbers or are outside the range are refused, and a file holding one
outside the range opens with the nearer end. Both are saved only when
not 0.
- Layout: Left is the space above a character in vertical type and on
its right in right-to-left type. Wrapping counts the space, a line's
end keeps it when aligned, and justification and Optical kerning
leave it at its set width. A ligature, a letter with its marks and a
tate-chu-yoko block take the values of their first character.
- With Fractional Widths off or System Layout on, the space before and
the space after a character are each set in whole points and added
to its rounded width, so justification keeps them at that width. A
tate-chu-yoko block rounds the space above and below it the same way.
- Character panel: with Show East Asian Options on, Insert Aki Left and
Insert Aki Right fields with 0, 250, 500 and 1000 in their menus;
Reset Panel sets both to 0.
- Character Style Options › Advanced Character Formats shows Insert
Aki Left and Insert Aki Right, with the Character panel's 0, 250, 500
and 1000 in their menus; a typed value below 0 or past 1000 sets 0 or
1000, and Reset Panel unsets both.
- SVG export: live text places each character the space moves, and
type on a path with Insert Aki is written as outlines.
Docs: docs/mcp.md, docs/target-app-parity.md.
Single Word Justification's Full Justify counted and placed a gap after
every drawn glyph, so a combining mark or the vowel sign of a Devanagari
syllable moved away from its letter. Desired Letter Spacing and the
letter spacing range of a justified line did the same between two glyphs
of one cluster.
- The Full Justify gap count and placement share one check that skips
glyphs with the same cluster byte as the glyph drawn after them.
- Letter spacing goes after the last glyph of a cluster only.
- Letter spacing, Full Justify and CJK inter-character gaps pass over
every default-ignorable character drawn with no width (soft hyphens,
bidi marks, embeddings, overrides and isolates, joiners, word joiners,
variation selectors, tags, the byte order mark) and put the space
between the visible characters on either side. The Hangul fillers stay
letters.
- A zero-width space takes no word-space room on a justified line and
stays a line break opportunity. Letter spacing before it is set after
it, so a line broken there ends at its last letter.
- A single word that Full Justify spreads and that breaks at a hyphen
has the same gap before the drawn hyphen as between its letters.
- Kinsoku push-in counts the gaps it can close past format controls, as
the layout closes them.
Tests cover horizontal, right-to-left and vertical type, Desired and
fitted letter spacing, format controls, zero-width spaces, the drawn
hyphen, push-in, and a Devanagari syllable when a Devanagari face is
installed.
Korean text broke after every Hangul syllable. A paragraph now has
Korean Line Break Anywhere, set from the Paragraph panel menu (with the
East Asian options), from the East Asian Composition Settings section of
Paragraph Style Options, and with `text.setFormat {koreanLineBreakAnywhere}`.
- Off, a word that contains Hangul (the characters between spaces) breaks
only at its spaces and after East Asian punctuation, or where the word
is wider than the line. Both composers follow it, and the word takes no
hyphen. On, a line may break between any two syllables, as before.
- New type has it off. Paragraphs and text objects saved before the
option read as on, so their lines do not move; the value is saved only
when it is off.
- Paragraph styles carry it, Reset Panel turns it off, and the .ai writer
reports it as lost for Korean paragraphs.
The help page: https://helpx.adobe.com/illustrator/desktop/design-with-text/fonts-and-scripts/set-line-breaks-korean-text.html
The command is described in docs/mcp.md, and docs/target-app-parity.md
lists the option.
A forced line break ends the first word when looking for room, inside a
No Break run too, as the line is set. A soft hyphen just before a forced
line break adds no hyphen to the measured width.
When layout looked for room for a line's first word in a frame that is
not a rectangle, a soft hyphen ended the word even inside a No Break
run, although the line does not break there. The word is now measured
across a soft hyphen where kinsoku or a No Break run keeps the line from
breaking after it.
The word gap is now the Desired word spacing the layout uses for area type
with Block on (TextObject::layout_justification), with Minimum and Maximum
moved out to it when it lies outside them. The paragraphs keep their own
Justification values, so a wide gap no longer leaves a 1,000 % Maximum
behind, and turning Block off brings back the paragraph's own Desired
value. The SVG writer reads the same values.
- The Contextual Task Bar offers Dynamic Text for area type outside a
thread, beside Convert To Point Type.
- type.dynamicText with wordGap or lineGap and no area type in the
selection is an error instead of being ignored.
- Docs: docs/mcp.md, params text, docs/target-app-parity.md.
In a frame that is not a rectangle, or with text wrap, layout moves a
line down to the first span wide enough for its first word. The word
was measured at full width before Mojikumi set an opening bracket at
the line's start flush, and with its last character at full width, so
a word that fit as set moved down to a wider line. It also ended at any
break opportunity, so an opening bracket counted without the character
kinsoku keeps with it and could be placed alone on a line too narrow
for that character.
- word_width ends the word only where break_line may end a line: at a
cluster end that kinsoku allows, not inside a No Break run, whose
spaces count. It leaves out the spaces at the word's end and narrows
its last glyph by the Mojikumi line-end credit.
- place_flow_line measures the word after the opening-bracket trim, and
the Every-line Composer's first-line placement takes off the same
start credit, so the composed widths match the placed lines.
With Line-end Punctuation Half Width, a closing bracket, comma or full
stop ending a line is set half width, but both composers measured it at
full width. A closing bracket that fit only at half width went to the
next line with the character before it, and so did a comma or full stop
with Burasagari None.
The single-line and every-line composers now measure each candidate
line with its last character set as narrow as Mojikumi sets it, using
the same rule the line is drawn with. A mark that already lost its half
to the punctuation after it and a line ending in a hyphen take nothing
more off, and the quarter em between Japanese and Latin text counts only
where the line ends. Kinsoku Shori Type measures the pushed-in and
pushed-out lines the same way. Right-to-left lines and Mojikumi None
break as before.
A test font sets ideographs and Japanese punctuation one em wide, so
the layout tests run without system fonts.
Type › Dynamic Text (`type.dynamicText`, also on the Contextual Task Bar
for type on a path) scales the text by one factor so it fills the span
between its start and end brackets, and the layout fits it again after
each edit to the text, the path or a bracket. The first character's
size moves in 0.1 pt steps within 0.1 to 1,296 pt. Turning it off, or
threading the type, keeps the sizes it was drawn at.
- The model saves `dynamicText` only when on.
- SVG, the legacy .ai writer and the .ai editing data write the drawn
sizes through `vectorcraft_text::drawn`; the editing data warns that
the setting is not written.
- Shrink Text to Fit and Dynamic Text step the size the Character panel
shows when a size measures the cap height, x-height or ICF box.
Docs: docs/mcp.md, docs/type-parity.md, docs/target-app-parity.md.
Part of #4134.
A centred or right-aligned line of tracked type was measured with the
tracking after its last character, so it sat half that tracking
(centred) or the whole tracking (right-aligned) left of where the page
of users' .ai files draws it. That page aligns a line as wide as its
characters without that tracking.
Shaping now records the tracking each glyph's advance holds
(SGlyph::tracking), and a line that isn't justified leaves its last
character's out of the width it is aligned by. The last character is
the last one the line draws before a paragraph's end, a forced line
break or the spaces a wrap leaves; spaces or a tab typed before a
paragraph's end or a forced line break keep the letter's tracking, as
the page does. Forced line breaks and wraps aren't in the files: they
follow the rule so that turning a wrap into a paragraph or a forced line
break keeps the line in place. Hyphenated lines, lines whose last
character hangs, vertical and right-to-left lines and type on a path
keep it. The tracking stays in the glyph's advance, so the caret,
selections, line breaking and Fit Headline are unchanged.
LineInfo::trailing gives the amount. Right-aligned area type sets the
text after its last tab the same way.
What aligns by line widths follows. Convert To Area Type makes its
frame end where the lines are aligned, with room for the tracking, so
tracked type converted either way stays in place. Affinity import lines
up differently aligned paragraphs of artistic text by the aligned
widths. SVG import moves a centred or right-aligned letter-spaced line
back by its share of the last letter spacing, so it stays where a reader
draws it and SVG export, which anchors lines at the end of their
advances, reads back unchanged.
Centred and right-aligned tracked type lays out differently than before
in every document.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
On a vertical path, an upright glyph is now placed in its column as
vertical point type places it, then the column is centered on the path.
- Its cell starts at its place on the path; it started 0.12 em earlier
with fonts whose cell top is less than a full cell above the baseline.
- A baseline shift moves it across the column instead of along the path.
- A horizontal scale widens it evenly about the column's center.
- A combining mark stays on its upright letter.
- The caret and the selection highlight span the column, half its em on
each side of the path, instead of the font's ascent and descent.
With Skew, 3D Ribbon and Stair Step on a path that runs to the left,
letters are a quarter turn counterclockwise from upright glyphs: Skew and
3D Ribbon mirror both kinds there, and Stair Step keeps letters level. The
test, the progress doc and the params text of Tate-chu-yoko Settings now
state these conditions and the block's directions on a path.
Follows #5557. Letters and digits lying on their side in vertical type on
a path kept their top toward the path's end, opposite the upright glyphs.
They are now set as horizontal type on the path sets them: baseline along
the path, top to the path's left, a quarter turn clockwise from upright
glyphs (CSS Writing Modes 3, Unicode UAX #50).
- The column is centered on the path: upright glyphs, letters on their
side and tate-chu-yoko blocks have their em box centers on the path
line instead of a column one em wide to the path's right.
- Upright glyphs are turned in the path effect's glyph space, so with
Skew on a curve their top runs back along the tangent and their x axis
stays up the page, as letters keep theirs.
- Tate-chu-yoko blocks on a path stand upright, stay whole on a curve and
move by Tate-chu-yoko Settings toward the path's start and left.
- A tate-chu-yoko block of mixed sizes sets every glyph in its first
character's em, on a path and off it.
Existing vertical type on a path redraws with these placements.
Kinsoku push-in room does not count a gap after inline art or inside a list marker, but the squeeze also closed those gaps. The squeeze now applies only to the gaps the room counts.
Align to Path moved the whole line by the largest ascent and descent
among its characters. Each character now moves by its own font, size
and vertical scale. Ascender runs the top of the font's em box along
the path: the ideographic em box that the font's BASE table gives, or
in a Chinese, Japanese or Korean font the one that its typographic or
hhea box, a one-em box-drawing cross or its ideographs give; else an
em box centered on the cap height. Descender runs the bottom of the font's
bounding box along the path, and Center runs a line at half the height
of the top of the font's H along it. In vertical type, Ascender and
Descender move the characters half an em, and Center leaves them on
the path.
Existing documents with Align to Path set to Ascender, Descender or
Center lay their type out at a new distance from the path.
An envelope mapped type from its laid-out box: ascent to descent for
point type, the frame for area type. The distorted glyphs then filled
less of the envelope than other art does, with room above the capitals
and below the baseline.
The envelope now maps type from the bounds of its glyph outlines,
underlines and strikethroughs when the type is on its own, in groups
and layers, or used as a clipping path. Inline graphics count by their
boxes. Rotated type and type in perspective map from their outlines as
they are drawn. Make with Mesh,
Make with Top Object and Reset with Mesh without Maintain Shape use
those bounds. Type that draws nothing keeps its laid-out box, and so
does type inside any other object, such as a blend, a repeat or a
symbol instance. Shrink Text to Fit type is measured as it is laid out
on the page.
vectorcraft-text's envelope_ink measures the type, and
register_envelope_ink registers it with the document crate. The engine
session, Renderer::new, live evaluation in vectorcraft-effects and the
.ai reader register it. The document crate keeps the measured boxes per
thread, by object and by a hash of the content, and measures again when
the type, the fonts, the hyphenation exceptions or the transform's
scale or rotation change.
This is VectorCraft's own rule. Envelopes of type made in VectorCraft
and in saved files map from the glyph outline bounds instead of the
type's laid-out box, so they redraw differently.
Layout kept no record of a run's face, so each paragraph looked up the face
of its first character three times for its line metrics and once more to
shape it. The layout now keeps each run's face the first time it is looked
up and uses it for shaping, for paragraph metrics, for on-path type's empty
line and for the column offset of vertical point type. Glyphs, positions,
bounds and baselines do not change.
A test-only helper lays text out looking every face up at each use, and a
new test requires point, vertical point, area and path type laid out both
ways to match exactly.
The layouts of 5,000 short point type objects take a median of 215 million
CPU cycles of the laying-out thread instead of 236 million in a release
build (11 alternating runs of each build on Windows 11, measured while
other builds were running).
Opening a document laid out every type object for its bounds and
baselines and threw the layouts away, and the first frame laid the same
objects out again. The open now keeps them, up to 128 MiB, and a frame
takes each one once.
A frame takes a layout only for a text object equal to the one laid out,
and only while the fonts, the system fallback setting and the hyphenation
exceptions are unchanged. When the last frame being drawn ends, the rest
are dropped if a frame took one, and all of them are dropped after eight
frames that take none. A layout with bitmap or color glyphs and a text
object with a gradient are not kept.
A paragraph that ends in a soft return ends with the empty line after it,
so the line the soft return ends is justified like any other; it was taken
for the paragraph's last line and left aligned.
In right-aligned area type, the text before a line's last tab sits at its
stops, measured from the left edge, and the text after it (none when the
tab ends the line) against the right edge. The line was laid out from the
left and aligned as a whole, which moved its start off the left edge and
its tabs' text off their stops. Illustrator's own layout in a user's .ai
sets its price lists so. Centred and justified lines are aligned as a
whole as before.
- Auto leading stays auto: each line takes the paragraph's share (key 7)
of the largest type on it. The leading was the first two lines'
distance for every line, so 10 pt lines under a 15 pt heading came in
18 pt apart.
- The paragraph's hyphenation options (keys 10 to 15) are read.
- Area type of one frame whose last lines the file sets, but which don't
fit here (the fallback font, or a descent past the frame's bottom),
gets a frame taller from its bottom (vectorcraft_text::fit_source_lines),
with a warning.
A user's .ai whose type differed from its page by 6.6%, so that it opened
from its PDF part with each line its own text object, now opens from its
layers.
In Justify Left, Center or Right, only the paragraph's last line keeps its
alignment; a line that a soft return (U+2028) ends is spread to the frame's
edges like any wrapped line. Illustrator's own layout in a user's .ai sets
such lines justified, and VectorCraft left them ragged.
Past a gutter of 1e300 a step no longer moves the baseline, so every cell of
a 100 x 100 frame was searched for all MAX_STEPS steps: over 40 s per layout.
AreaOptions::gutter has no limit, so a saved file can do this.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
To find the characters that justification or Mojikumi moves, SVG export
without Fewer <tspan> Elements laid out every live type object a second
time, as point type with
Mojikumi None and default Justification options, whenever its paragraph
had Mojikumi on. New type gets Line-end Punctuation Half Width, so every
new type object was laid out twice. Mojikumi only spaces Japanese
punctuation and Japanese letters, so type without them lays out the same
either way.
- TextLayout::mojikumi_applies says whether the text or a list marker
holds a character Mojikumi spaces.
- reader_advances keeps such a paragraph's Mojikumi, and reads the glyphs
from the layout it was given when the object it would lay out is the
same; otherwise it lays the object out again as before.
The SVG is unchanged. Exporting 5,000 point type objects takes a median
of 109.4 ms instead of 171.5 ms on Windows 11.
With System Layout on or Fractional Widths off, each advance is rounded
to whole points, but a right-to-left character with manual kerning
still moved by the unrounded kerning value. The difference between the
two changed the space after the character before it in reading order.
The character now moves by the change the kerning makes to its rounded
advance, so only the space before the next character changes.
dotCooCoo