- Extend vectorcraft-geom::shapes with clean-room open/pie/chord/arc ellipse and rectangle builders, per-corner radii, polygon/star corner rounding and deterministic vertex randomization, logarithmic/Archimedean spiral divergence and inner radius, and perspective/isometric 3D box face builders.
- Isolate 3D Box and customizable shape parameters as a VectorCraft add-on under crates/*/src/**/addons/:
- crates/tools/src/addons/box3d.rs (Box3dTool and CustomShape extras stored under Node::extras["vc-shape-tools"])
- crates/engine/src/cmd/addons/shapes.rs (addon.shapes.rectangle, addon.shapes.ellipse, addon.shapes.polygon, addon.shapes.star, addon.shapes.spiral, addon.shapes.box3d, and addon.shapes.configure)
- crates/ui-egui/src/addons/shapes.rs (Object > Plug-ins > 3D Box > 3D Box Tool and context-sensitive Control bar options)
- Keep crates/engine/src/cmd/create.rs, crates/tools/src/shape.rs, and crates/tools/src/draw2/family.rs byte-for-byte identical to main.
- Add translations for "3D Box" and "3D Box Tool" across all 26 .tsv catalogs in crates/ui-egui/src/i18n/.
Review of #5694 asked for two changes.
Add-on, not a core tool, as Enclosing Lasso is:
- The command is addon.contour.set, in an add-on module of its own
(crates/engine/src/cmd/addons/contour.rs) with its tests beside it.
- The tool is listed under Object > Plug-ins > Contour and under its own
"Contour" heading in All Tools. It has no Basic or Advanced toolbar
slot and no default shortcut. The Contour bar is unchanged.
- The add-on drawer test lists Contour with the other add-on tools.
- Docs (mcp.md, the parity documents, ROADMAP) say add-on and use the
new command name; mcp.md gains a Contour add-on section.
Translations: rows for "Contour", "Contour Tool", "Sharp", "Bake" and
"Turn the Contour into plain paths" in all 26 catalogs ("Round" and
"Square" already had them). Drafted from each catalog's own vocabulary
(for Bake, the verb it uses for Expand Appearance; a word other than the
catalog's Stroke or Path word for the tool's name where they collide);
they are not native-speaker reviewed.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
A dropped press (a long touch, a canceled touch, a second finger) now
goes to the tool through Tool::drop_press, which takes Escape as during
a drag by default. The Pen, Smart Pen and Curvature tools override it
so the path being drawn goes on: they forget the press, and a Curvature
point the press dragged goes back where it was.
The release that follows runs only the tool's Cancel and Notify actions,
so a Selection marquee selects nothing and a Shift-drag Artboard marquee
toggles nothing. The engine puts back the persistent options the tool
had at the press (the Polygon tool's sides changed with the arrow keys),
and stores none of them.
The Measure tool and the Measure & Inspect tool snapped the end point of
a drag without Shift, but with Shift held they only turned the pointer
onto its 45° step and kept its distance: with Snap to Grid on the
measurement ended off the grid, with Smart Guides on it did not land in
line with an anchor, and with no snapping a drag of (37.3, 12.1) measured
39.2 pt at 0°.
Both now project the pointer onto the 45° step nearest its direction and
snap it there as the Line Segment tool snaps a Shift-drawn end, so it
stays on the step: (37.3, 12.1) measures 36 pt at 0° on a 9 pt grid, and
37.3 pt with no snapping. With Snap to Point alone, the anchor the pointer
snaps to is projected onto the step instead, so the end lands on an
anchor on the step and in line with one beside it.
Path Precision Tools gains the Shared Edge Merge Tool, kept out of the
toolbars (All Tools drawer and Object › Plug-ins › Path Precision Tools,
no shortcut), and Keep Shared Points Together:
- Shared Edge Merge Tool (sharedEdge): over two paths touching at two
coincident anchors (tolerance 0 to 3 pt) hovering shows the two
stretches and the merged edge; a click replaces both with it, half way
between them, or following the upper (Shift) or lower (Alt) path. Both
paths stay closed or open, anchors either stretch has inside are
matched on the other, one undo step.
- Making ends: near anchors meet on a click and an anchor one path lacks
is added to match; Shift+Alt asks for this inside a stretch.
- Keep Shared Points Together: an option that makes Slide Anchor Along
Path, Extend Path and Set Anchor take coincident anchors along. Nothing
else in the app changes.
- Shared Edges section in the Anchor Inspector: brush diameter,
coincidence and the option.
- Commands addon.pathtools.mergeEdge and movePointsTogether, params
validated and covered by the command sweep.
- Cursor stand-in, catalog rows in every language, docs and tests.
Path Precision Tools gains two tools, kept out of the toolbars (All Tools
drawer and Object › Plug-ins › Path Precision Tools, no shortcuts):
- Corner Tool (cornerTool): editable corners on any path through the
existing Live Corners. Hover shows an eligible anchor, a click cuts a
corner with the tool's radius and kind, a drag sizes it (Shift: whole
values), a corner's marker selects it and loads its values, resizes it
and removes it at 0 or on a double-click; a corner never grows past
what fits; an Alt-marquee cuts every eligible anchor inside.
- Corners section in the Anchor Inspector: radius, kind, selected count,
Apply to Selected Anchors.
- Slide Anchor Along Path (slideAnchor): a drag runs an anchor along its
curve, the neighbouring segments refitted by the keep-shape kernel;
Shift snaps where the tangent is a multiple of 45° from the constrain
angle.
- Commands addon.pathtools.cornerSet, cornerRemove and slideAnchor, one
undo step each, params validated and covered by the command sweep.
- Cursor stand-ins, catalog rows in every language, docs and tests.
Path Precision Tools gains the Parametric Shape Tool: ten kinds of shape
(rectangle, ellipse, polygon, star, ring, arrow, cross, heart, gear,
speech bubble) that stay editable as numbers.
- Geometry in vectorcraft_pathops::addons::pathtools::shapes: each kind's
outline, corner rounding limited to the middle of a side, a fingerprint
of the outline, recovery of centre, size and rotation after a move,
turn or scale, and recognition of plain rectangles, ellipses and
regular polygons.
- The tool (parametricShape, All Tools drawer and Object › Plug-ins ›
Path Precision Tools only, no shortcut): drag from the centre (Shift:
45° steps), arrow keys change the count and values while dragging,
handles edit a selected shape, double-click places one.
- Commands addon.pathtools.shape.create / .set / .convert, one undo step
each; params checked (counts 3..1000, sizes up to 16384 pt).
- A shape keeps its numbers in one object-data entry (vc-pathtools-shape)
that SVG export already leaves out; anchor edits make it a plain path.
- Parametric Shape panel, cursor stand-in, catalog rows in all 25
languages, docs and tests.
A built-in add-on under Object › Plug-ins › Smart Pen:
- The Smart Pen Tool draws and edits Bézier paths without switching
tools: a click adds the next segment straight or curved (a panel
toggle; Tab flips the segment being placed or the last one), a drag
makes a smooth point (Alt breaks the handle, Shift snaps to 45°, Space
moves the point), a curve after a straight segment joins it tangent.
- On existing paths it selects and moves points, removes a point keeping
the shape (Alt-click), toggles smooth/corner (double-click), drags
handles, reshapes a segment by dragging it and inserts a point on it
(Alt-click); it closes, continues and joins open paths.
- The Smart Pen panel: next segment straight or curved, remove points
keeping shape, make smooth, make corner, retract handles, close or
join.
The tool stays out of both toolbars as shipped; the All Tools drawer
lists it under the add-on's heading. Commands are addon.pen.*; the
existing Pen tool, commands and menus are unchanged.
A built-in add-on under Object › Plug-ins › Path Precision Tools:
- Anchor Eraser Brush: painting over selected paths removes the anchors
under the brush that the outline can do without within a tolerance,
refitting the handles beside them (Alt ignores the tolerance, Cmd/Ctrl
deletes without refitting, pen pressure can scale the brush); one undo
step per stroke.
- Extend Path tool: dragging an end of an open path carries it on
straight, by stretching its last curve or along the circle it curves
on, or shortens it back along itself.
- Measure & Inspect tool: drag to measure distance and angle; hover a
path to read segment and path length, area, curvature, tangent and
anchor angles and handles, in the document's units.
- Anchor Inspector panel: the selected anchor's position and handles as
numbers, with Make Smooth (auto-smooth rule), Make Corner, Equalize
Handles, Remove Points Keep Shape, Add Points and three ways to close.
- Add Points at Crossings and Split at Crossings.
The tools stay out of both toolbars as shipped; the All Tools drawer
lists them under the add-on's heading. Commands are addon.pathtools.*;
the existing commands, tools and menus are unchanged.
Harley Hawk