A block's line took the tallest ascent and deepest descent of its
characters, or the height of the stack's em boxes, whichever was larger.
The top block line's characters reach above the stack by their ascent
past the em box, and the bottom line's below it by their descent, so with
a wide Line Gap the line was too short for them. The line's ascent and
descent now also take in each character's reach from its own block line's
baseline.
A fill in a glyph's clip marked the clip as filled before the fill was
added. When the fill painted nothing (a palette index past the palette,
or a radial gradient that draws no circle), the next glyph painted in
the same clip became the clip's only child, and closing the clip kept
that glyph on its own, so it drew outside the clip.
The clip is now marked filled only when the fill adds the clip's first
child, and a fill that adds nothing leaves the mark as it was.
With Show East Asian Options on, the Glyphs panel menu lists Traditional
Forms, Expert Forms, JIS 04, JIS 90, JIS 78 and JIS 83 Forms, Monospaced
Full-Width, Half-Width, Third-Width and Quarter-Width Forms, and Revert
To Default Forms. Each form draws the selected characters with the
font's OpenType feature for it (trad, expt, jp04, jp90, jp78, jp83,
fwid, hwid, twid or qwid). A form is checked when every selected
character has it and disabled when none of the faces that draw the
selected text, fallback faces included, has the feature.
The form is a new character attribute, glyphForm, one form at a time
(text.setFormat, text.setRangeStyle). It is saved only when set,
character styles carry it, and runs that differ only in their form
shape as one piece of text. SVG writes it in font-feature-settings;
PDF draws the glyphs from the layout.
While a document's composite fonts are lent, type naming a composite font
the document does not define is set as in a missing font, even when the
front document or the document a placed document sits in defines one of
that name. A document that defines no composite font gets an empty scope
too, so a document in the back, a tiled window, a thumbnail or an export
made while another document is in front no longer borrows the front
document's definitions. A temporary document drawn while a document draws
keeps that document's fonts, and type laid out with nothing lent still uses
the registered ones.
- FontDb::composite_font looks only in the latest loan of the database.
- lend_composite_fonts lends an empty set at the top level when the
database holds composite fonts; lend_document_composite_fonts also lends
one inside another loan, for placed documents, back-document measuring
and threaded reflow on open.
- A loan that leaves out a registered font gets its own generation, so
layouts made with that font are not reused under it.
A radial gradient whose circles both have the same negative radius (as a
variable font's instance can give) draws no circle. A glyph painted with
only that gradient was read as no colour glyph, so layout drew its
outline instead. It is now colour art that draws nothing.
Character panel > Tsume, shown with Show East Asian Options, takes away a
percentage of the blank space on each side of a character's ink, inside
its own width, in horizontal type. The value is from 0 to 100, 0 by
default. 50 halves that space and 100 sets the ink against the
characters before and after it; the glyph keeps its shape. A character
without ink, such as a space, keeps its width, and a ligature or a
letter with its marks takes the value of its first character. The
font's pair kerning, tracking, manual kerning and Insert Aki are added
after it, and justification keeps it. Vertical type keeps its spacing.
- text.setFormat and text.setRangeStyle take `tsume`; a value that is
not a number or is outside 0 to 100 is refused, naming the key.
Character styles carry it, and a file holding a value outside the
range opens with the nearer end.
- The Character panel's Tsume field has 0, 25, 50, 75 and 100 in its
menu, and Reset Panel sets it to 0. Character Style Options shows it
in Advanced Character Formats.
- Live SVG text places each character Tsume moves, and type on a path
with Tsume is written as outlines.
Docs: docs/mcp.md (Tsume, Character Style Options fields),
docs/target-app-parity.md.
A paragraph whose characters differ in line metrics, in area type that is
not a rectangle or that wraps around an object, was broken line by line
with the Single-line Composer when the frame could not hold all of it.
The lines the frame holds are now composed with the whole paragraph: a
line the frame has no room for, and every line after it, is measured as
wide as the span of the last line set in the frame, less its indents.
Those lines overflow, or go on in the next threaded frame, which composes
them again at its own widths. A paragraph whose first line has no room,
and a search that passes its limits, still fall back to Single-line.
Docs: docs/mcp.md, docs/target-app-parity.md.
A radial gradient whose color line runs past 0 or 1 can get a circle
with a negative radius once its stops are normalized to 0..1. Circles of
a negative radius are not drawn: only the side of the circle of radius 0
(the tip of the cone) where the radius is positive is painted
(https://learn.microsoft.com/en-us/typography/opentype/spec/colr, Radial
gradients). Before:
- As vector art, a padded gradient with a stop before 0 and its centers
apart was focused on the start circle's center instead of the tip, and
one with its centers together got stop offsets below 0.
- Drawn into an image (a glyph with a sweep gradient, a Porter-Duff
composite or a repeating gradient), any such gradient filled the glyph
with its first stop's color.
Both now recast the circles so neither radius is negative. With pad, the
stops on the side that is not drawn become one stop at the tip with the
color there; stops at the tip stay, so a sharp change of color there
keeps the color on the drawn side. With repeat and reflect, the circles
move by whole periods of the color line to the drawn side. When no
circle is drawn, nothing is painted.
When a wrap object splits a line band, the lines in the spans after the
first shared the first line's baseline even when they held taller type.
Their ascent then ran into the line above the band. A further span now
goes only to a line whose own leading sets it no higher than the span's
baseline; a taller line leaves the span empty and goes on in the next
span or on the next baseline. Both composers follow the same rule.
In area type of a shape other than a rectangle, or with text wrap, the
Single-line Composer placed each line at the metrics of its first
character and broke it in the room there. When a later character on the
line was taller, the baseline moved down by the difference without
measuring the room again, so the line could reach into a narrower part
of the frame or into a wrap object.
- A line that turns out taller than it was placed is placed again at
metrics that hold both and broken again in the room there.
- When that leaves the taller character for the next line, the line is
set at its own metrics where the room there is no narrower, and takes
the words before that character that fit there. Otherwise it stays
where it was placed.
Tests: crates/text/src/tests/combos.rs (a stepped frame and text wrap;
the two mixed-size tests now expect the Single-line Composer to break
as the Every-line Composer does there).
Docs: docs/mcp.md, docs/target-app-parity.md.
A justified line opened no gap before a right-to-left warichu block: the
glyph drawn first after the text before it is not the block's first
glyph, and it was taken as continuing the block. The block now starts at
the first of its glyphs the line draws, and blocks the bidi order
interleaves keep their starts.
The caret next to a character of a block spanned the whole line. It now
spans the band of the character's block line, as the selection does.
A right-to-left line draws its last character before its tabs. When that
character loses its Japanese-Latin space at the line's end, the layout drew
it narrower before placing the tabs, but measured the line with the full
advance and took the trim off afterwards. The measured line was narrower
than the drawn one by the trim: a right-aligned line ended past the
frame's right edge (305 pt in a 300 pt frame), and a line that did not fit
as drawn was kept whole.
drawn_width now takes the end trim off the glyph it belongs to, so the tabs
drawn after it take their stops from where it ends, both where lines break
and where a line is measured for alignment.
A COLRv1 linear or radial gradient whose color line repeats or reflects
made the whole glyph an image. Such a gradient now reads into a vector
gradient with the same spread. The COLR specification repeats the
interval from the first color stop to the last, so one run of the stops
spans the gradient's vector:
https://learn.microsoft.com/en-us/typography/opentype/spec/colr
A repeating or reflecting radial gradient that starts at a circle stays
an image, and so does a repeating or reflecting gradient with a stop
whose palette index is outside the palette. A color line with an extend
value the specification does not define now pads, as the specification
says, instead of making the glyph an image.
Right-to-left type on a path that overflows searched for the start of its
text that fits with a binary search, which assumed that a longer start
never fits once a shorter one does not. A letter tracked to a negative
advance breaks that: with steps of 6, 6, -3 and 6 points in a 10 point
span, the first three letters fit while the first two do not, and the
search showed only the first letter.
- Without hanging punctuation, and with no spacing or on a path of one
straight segment, every start is measured in O(n log n): each glyph
keeps its place in the whole text's visual order, except the trailing
whitespace and controls that UAX #9 rule L1 sets to the paragraph's
level.
- With hanging punctuation, or spacing on a curve, when a letter has a
negative advance, a start is a candidate only when its glyphs, in its
own visual order and each at the least step it can take, reach no
farther than the path's length. This lower bound holds with negative
advances.
- At most 32 candidates are arranged from the longest. When none of
them fits, a binary search over the rest shows a start that fits,
which is not always the longest.
- With hanging punctuation, or spacing on a curve, text with no negative
advance keeps the binary search.
Right-aligned and centered type on a curve with Spacing was placed using
the width its glyphs have at the start bracket, while the steps were
measured where the line was placed, so a line that fits could end past
the end bracket and lose glyphs. It is now placed using the width of the
steps it has where it is placed.
A document's composite fonts were lent by writing them into the font
database's shared map, and a second lend of another definition of the same
name was skipped while the first was held. A document drawn in a tiled or
floating window while the front document drew, a document placed in one
that defines the name differently, and an export made while another
document is in front could draw their type in the other document's
definition. Registering the front document's fonts during a render could
also change the definition mid-render.
Lending now applies on the lending thread only: each guard pushes the
document's definitions onto a per-thread stack that lookups read before the
database's own fonts, latest loan first, and removes them when it drops,
also when the thread unwinds. The guard is neither Send nor Sync. Lending no
longer changes the database or its generation; while a thread lends
definitions other than the database's, FontDb::generation gives a number of
its own for them, so kept layouts and render caches made in one document's
definitions are not used for another's.
A right-to-left line draws the text before a tab after it, but its width
was measured in the order of its text. A right-aligned line such as
"אב גד<tab>הו זח" with a stop at 150 pt in a 300 pt frame ended 5.59 pt
past the frame's right edge, and right, center and decimal stops aligned
the text before the tab instead of the text drawn after it.
- The line's width is measured in drawing order, each tab up to its stop
from where the glyphs drawn before it end. Right, Auto and centered
lines are aligned by that width. Stops are still measured from the
left edge.
- Right, center and decimal stops align the text drawn after the tab.
- Area type breaks a line with a tab where it fits as drawn, and wraps a
line that fits only in the order of its text. Once the line holds a
tab, it reads on while the least it can be drawn at fits, then ends at
the latest break that fits as drawn: up to 256 breaks are measured
from the latest back, and earlier breaks without a hyphen are
bisected. Hyphenation points are measured as drawn the same way, so
the line hyphenates at a point that fits.
- Only lines of horizontal paragraphs with right-to-left text keep a
list of their break candidates.
- A tab that ends a wrapped right-to-left line is drawn before the line
at its own width instead of pushing the line to the right.
Docs: docs/target-app-parity.md.
A justified area type line counted a tab as a word space, so it gave
the tab a share of its room that no glyph drew, and the line ended
short of its measure. A word-tab-word line ended short too.
- The text up to a line's last tab keeps its spacing, each tab keeps
its stop and its leader stays in its gap. The text after the last
tab takes the line's room: word spacing, letter spacing and glyph
scaling within their ranges, then its word spaces, or the gaps
between its letters when it has none. Kashidas go in that text when
it is one run.
- A tab separates two words, so Single Word Justification does not
align a word-tab-word line.
- Right-to-left lines take the text drawn after the last tab drawn,
measured as the line is drawn, and vertical lines work down the
column. Point type keeps its natural width.
Docs: docs/target-app-parity.md, docs/type-parity.md.
A paragraph whose characters differ in line metrics (type size, font,
leading, vertical scale, or an inline graphic taller than the text) was
broken with the Single-line Composer in area type of a shape other than
a rectangle, or with text wrap. The every-line composer now composes it
there too.
- The composer takes each line's width from a measure that follows
where the lines above it went (`composer::Measure`,
`compose_with`). The fixed widths by line number are one such measure.
- In a frame whose lines are not all as wide, each line the composer
tries is placed from the pen the lines above it left, at its own
tallest metrics, as the line loop places it (`layout/shaped.rs`).
Starts with the same placement are shared, and each start keeps the
placements it was tried with.
- A line too long for its room does not end the search from its start
while a glyph after it could make the line taller and set it lower,
where the frame may be wider.
- The line loop places a composed line in such a frame at the line's
tallest metrics, so it gets the room the composer measured for it.
- The search for one paragraph stops after 1,000,000 lines tried or
2,000,000 baseline steps. The searches of all the paragraphs of one
frame share a budget of 2,000,000 lines and 4,000,000 steps, kept
apart from the line loop's own steps. A paragraph whose search stops
is broken line by line. A paragraph the frame has no room for is
broken line by line too, and overflows as before.
Tests: crates/text/src/tests/combos.rs (a stepped frame, a frame that
widens, text wrap with two spans on a baseline, overflow, a long
paragraph) and crates/text/src/layout/wrapping_tests.rs (the composer
with a measure, and the shared search budget).
A selection inside a warichu block was highlighted across the whole
line of text, so selecting a character of the upper block line
highlighted the lower one too, and a selection from one block line to
the next spanned the wrong characters. Each block line now gets its own
band, out to halfway to the block lines next to it, with one highlight
over each run of selected characters drawn side by side on it. A
selection that runs past the line still covers the line break.
Glyphs now carry their block line, so the characters of one block line
stay together for the highlight and for a click whatever their own
Character Alignment.
- Insert Kashidas skips the characters of a warichu block.
- Blocks whose characters the bidi order draws in turn keep where each
block starts.
- A click on a block line goes to that line's characters.
- Digits marked Warichu in vertical type on a path stay across the column.
- A block of several fonts gives its line the tallest ascent and the
deepest descent among them.
- Warichu Settings on characters not marked Warichu do not split shaping.
- Warichu Settings leaves a value outside its range as it is unless it is
edited.
The Character panel menu has Warichu and Warichu Settings… with Show East
Asian Options. Warichu characters are set at a percentage of their size
and stacked on 1 to 6 lines inside their line: one above the other in
horizontal type and side by side in vertical type. Warichu Settings sets
Lines, Line Gap, Scale and Alignment.
- text.setFormat and text.setRangeStyle take warichu, warichuLines,
warichuGap, warichuScale and warichuAlign; ui.warichuSettings opens
the dialog.
- A stretch of warichu characters is one block that stays whole on one
line. The canvas and every export draw the stacked lines; SVG, PDF and
the .ai writers write such type as outlines, as they do ruby. Type on a
path sets the characters at their own size.
- The attributes are saved natively, carried by character styles and
translated in every complete catalog.
Docs: docs/mcp.md, docs/type-parity.md.
The Paragraph panel's Mojikumi Set lists None, YakumonoHankaku,
GyomatsuYakumonoHankaku, GyomatsuYakumonoZenkaku and YakumonoZenkaku,
then Line-end Punctuation Half Width, and text.setFormat {mojikumi}
takes yakumonoHankaku, gyomatsuYakumonoHankaku, gyomatsuYakumonoZenkaku
and yakumonoZenkaku besides none and lineEndHalf.
The spacing of each set is VectorCraft's own rule, built on the help
page's one-line description of each set:
- YakumonoHankaku sets every bracket, comma and full stop half width,
takes a quarter em off each side of a middle dot, and puts a quarter
em between Japanese and Latin letters or digits.
- GyomatsuYakumonoHankaku keeps punctuation full width inside a line,
sets an opening bracket starting a line flush and a closing mark
ending it half width, and takes the quarter em after a middle dot
ending a line off.
- GyomatsuYakumonoZenkaku keeps punctuation full width and adds the
quarter em between Japanese and Latin text.
- YakumonoZenkaku sets characters as None does.
Both composers and vertical type measure each line as it is set. A
right-to-left paragraph, whose line ends are measured untrimmed, also
draws them untrimmed, and a right-to-left line that ends between a
Japanese and a Latin character is measured without the quarter em the
set adds there. With a Desired glyph scaling other than 100%, the
space a set takes off before an opening bracket or middle dot, and the
Japanese-Latin space recorded at a line's end, scale with the glyph.
The sets save with the document and paragraph styles; new type and
Reset Panel keep Line-end Punctuation Half Width. SVG export lays type
with middle dots out again for its positioned spans. A .ai save
reports a paragraph with one of the new sets as left out.
Docs: docs/mcp.md, docs/target-app-parity.md, docs/type-parity.md,
docs/gaps.md.