The Paragraph panel's Mojikumi Set lists None, YakumonoHankaku,
GyomatsuYakumonoHankaku, GyomatsuYakumonoZenkaku and YakumonoZenkaku,
then Line-end Punctuation Half Width, and text.setFormat {mojikumi}
takes yakumonoHankaku, gyomatsuYakumonoHankaku, gyomatsuYakumonoZenkaku
and yakumonoZenkaku besides none and lineEndHalf.
The spacing of each set is VectorCraft's own rule, built on the help
page's one-line description of each set:
- YakumonoHankaku sets every bracket, comma and full stop half width,
takes a quarter em off each side of a middle dot, and puts a quarter
em between Japanese and Latin letters or digits.
- GyomatsuYakumonoHankaku keeps punctuation full width inside a line,
sets an opening bracket starting a line flush and a closing mark
ending it half width, and takes the quarter em after a middle dot
ending a line off.
- GyomatsuYakumonoZenkaku keeps punctuation full width and adds the
quarter em between Japanese and Latin text.
- YakumonoZenkaku sets characters as None does.
Both composers and vertical type measure each line as it is set. A
right-to-left paragraph, whose line ends are measured untrimmed, also
draws them untrimmed, and a right-to-left line that ends between a
Japanese and a Latin character is measured without the quarter em the
set adds there. With a Desired glyph scaling other than 100%, the
space a set takes off before an opening bracket or middle dot, and the
Japanese-Latin space recorded at a line's end, scale with the glyph.
The sets save with the document and paragraph styles; new type and
Reset Panel keep Line-end Punctuation Half Width. SVG export lays type
with middle dots out again for its positioned spans. A .ai save
reports a paragraph with one of the new sets as left out.
Docs: docs/mcp.md, docs/target-app-parity.md, docs/type-parity.md,
docs/gaps.md.
Type read from a text document's font record was set in whichever installed
face first answered to the record's PostScript name (ignoring case and
punctuation), and its family was then swapped for any available family
spelled alike but for case and punctuation (`FontDb::find_family`): a record
naming `SampleInk`, the PostScript name of `Sample/Ink`, set its type in
`SAMPLE INK`. Copies of one family and style under other PostScript names or
versions were not told apart either, so the type could set at other widths
than the file's own page.
- `named_font` / `document_font` (crates/eps/src/import/text.rs) give the
family and style of the installed face of exactly that PostScript name,
else one that differs only in case or punctuation, and name its version
when the family and style alone resolve to another installed copy.
- The font record's key 5, its version string (name ID 5), is read and picks
that version among the faces of the name. Each record is resolved once.
- `FontDb::postscript_faces` lists every installed face a PostScript name
answers to, loading their families; the import prefers among them one of
exactly that name.
- Type a PostScript program sets (EPS import) and legacy .ai type take the
face of their font's name the same way.
- The .ai save writes a static font's version (`/5`) when its PostScript name
alone would give the reader another installed copy (another version, or the
same name in another family), keeps the version in the style it compares,
and checks that the type comes back in the same family, style and face,
taking the record's version as the reader does (up to 256 bytes), so such
type round-trips without a note.
Measured on 224 users' files (used locally, never committed): 16 files set
some type in another face; 12 render differently against their own page,
10 closer and 2 further by 0.03% of the page; envelopes of type that open
live go from 154 to 159, none fewer in any file; no file opens another way.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
`cargo clippy --target wasm32-unknown-unknown -p vectorcraft-ui-egui
-- -D warnings` stopped twice. In vectorcraft-text, MAX_FILE_SEARCHES
is used only by the system font search, which is not compiled for
wasm32, so it was dead code there. In vectorcraft-ui-egui, Runtime
holds only manual_window_open and status_message on wasm32, and the
hand-written Default set them to false and None, so clippy's
derivable_impls stopped the run.
- MAX_FILE_SEARCHES is compiled only for targets other than wasm32,
like the SysFallback struct next to it.
- Runtime derives Default on wasm32, and the hand-written Default,
which creates the updater, is compiled only for other targets.
A glyph that justification widens to fill the line keeps its Insert Aki
before it at its width, and its own width, which ligature carets stand
in, now starts where the glyph is drawn. Optical kerning measures a pair
from the letter of a cluster rather than from a combining mark whose
advance holds the cluster's Aki.
The SVG test also checks centered and right-aligned lines with Insert Aki.
Single Word Justification adds no space inside an inseparable pair. A
right-to-left line draws the second half's cluster before the first half,
with the cluster's glyphs in logical order, so a dash followed by a
combining mark puts the mark next to the first dash. The pair is now found
from the two neighboring clusters instead of neighboring glyph indices.
Paragraph panel menu > Bunri-Kinshi (with the East Asian options) and
text.setFormat {bunriKinshi} turn it on per paragraph. A line then
never breaks inside two em dashes, two horizontal ellipses, two two-dot
leaders or the two halves of a vertical kana repeat mark, the pairs W3C
JLREQ lists for class cl-08 (https://www.w3.org/TR/jlreq/#cl-08), nor
inside a chain of em dashes. Both composers, vertical type, Kinsoku
Shori Type, hyphenation and No Break follow it, and a pair wider than
the line stays whole on it. Justification and letter spacing add no
space inside a pair.
The setting works only with a Kinsoku Set: with Kinsoku Set None the
paragraph keeps the value without effect and the menu item is
unavailable. It is off by default, saved with the paragraph only when
on, carried by paragraph styles (Paragraph Style Options > East Asian
Composition Settings), and turned off by Reset Panel. A value that is
not true or false is refused. The .ai editing data has no field for it,
so saving reports a paragraph with it on and a pair in it as left out.
Docs: docs/mcp.md, docs/target-app-parity.md.
Characters take two new attributes, `akiLeft` and `akiRight`: space
before and after each character in reading order, in thousandths of an
em from 0 to 1000, measured as tracking is. `text.setFormat`,
`text.setRangeStyle` and character styles set them; values that are not
numbers or are outside the range are refused, and a file holding one
outside the range opens with the nearer end. Both are saved only when
not 0.
- Layout: Left is the space above a character in vertical type and on
its right in right-to-left type. Wrapping counts the space, a line's
end keeps it when aligned, and justification and Optical kerning
leave it at its set width. A ligature, a letter with its marks and a
tate-chu-yoko block take the values of their first character.
- With Fractional Widths off or System Layout on, the space before and
the space after a character are each set in whole points and added
to its rounded width, so justification keeps them at that width. A
tate-chu-yoko block rounds the space above and below it the same way.
- Character panel: with Show East Asian Options on, Insert Aki Left and
Insert Aki Right fields with 0, 250, 500 and 1000 in their menus;
Reset Panel sets both to 0.
- Character Style Options › Advanced Character Formats shows Insert
Aki Left and Insert Aki Right, with the Character panel's 0, 250, 500
and 1000 in their menus; a typed value below 0 or past 1000 sets 0 or
1000, and Reset Panel unsets both.
- SVG export: live text places each character the space moves, and
type on a path with Insert Aki is written as outlines.
Docs: docs/mcp.md, docs/target-app-parity.md.
Single Word Justification's Full Justify counted and placed a gap after
every drawn glyph, so a combining mark or the vowel sign of a Devanagari
syllable moved away from its letter. Desired Letter Spacing and the
letter spacing range of a justified line did the same between two glyphs
of one cluster.
- The Full Justify gap count and placement share one check that skips
glyphs with the same cluster byte as the glyph drawn after them.
- Letter spacing goes after the last glyph of a cluster only.
- Letter spacing, Full Justify and CJK inter-character gaps pass over
every default-ignorable character drawn with no width (soft hyphens,
bidi marks, embeddings, overrides and isolates, joiners, word joiners,
variation selectors, tags, the byte order mark) and put the space
between the visible characters on either side. The Hangul fillers stay
letters.
- A zero-width space takes no word-space room on a justified line and
stays a line break opportunity. Letter spacing before it is set after
it, so a line broken there ends at its last letter.
- A single word that Full Justify spreads and that breaks at a hyphen
has the same gap before the drawn hyphen as between its letters.
- Kinsoku push-in counts the gaps it can close past format controls, as
the layout closes them.
Tests cover horizontal, right-to-left and vertical type, Desired and
fitted letter spacing, format controls, zero-width spaces, the drawn
hyphen, push-in, and a Devanagari syllable when a Devanagari face is
installed.
Korean text broke after every Hangul syllable. A paragraph now has
Korean Line Break Anywhere, set from the Paragraph panel menu (with the
East Asian options), from the East Asian Composition Settings section of
Paragraph Style Options, and with `text.setFormat {koreanLineBreakAnywhere}`.
- Off, a word that contains Hangul (the characters between spaces) breaks
only at its spaces and after East Asian punctuation, or where the word
is wider than the line. Both composers follow it, and the word takes no
hyphen. On, a line may break between any two syllables, as before.
- New type has it off. Paragraphs and text objects saved before the
option read as on, so their lines do not move; the value is saved only
when it is off.
- Paragraph styles carry it, Reset Panel turns it off, and the .ai writer
reports it as lost for Korean paragraphs.
The help page: https://helpx.adobe.com/illustrator/desktop/design-with-text/fonts-and-scripts/set-line-breaks-korean-text.html
The command is described in docs/mcp.md, and docs/target-app-parity.md
lists the option.
A forced line break ends the first word when looking for room, inside a
No Break run too, as the line is set. A soft hyphen just before a forced
line break adds no hyphen to the measured width.
When layout looked for room for a line's first word in a frame that is
not a rectangle, a soft hyphen ended the word even inside a No Break
run, although the line does not break there. The word is now measured
across a soft hyphen where kinsoku or a No Break run keeps the line from
breaking after it.
The word gap is now the Desired word spacing the layout uses for area type
with Block on (TextObject::layout_justification), with Minimum and Maximum
moved out to it when it lies outside them. The paragraphs keep their own
Justification values, so a wide gap no longer leaves a 1,000 % Maximum
behind, and turning Block off brings back the paragraph's own Desired
value. The SVG writer reads the same values.
- The Contextual Task Bar offers Dynamic Text for area type outside a
thread, beside Convert To Point Type.
- type.dynamicText with wordGap or lineGap and no area type in the
selection is an error instead of being ignored.
- Docs: docs/mcp.md, params text, docs/target-app-parity.md.
In a frame that is not a rectangle, or with text wrap, layout moves a
line down to the first span wide enough for its first word. The word
was measured at full width before Mojikumi set an opening bracket at
the line's start flush, and with its last character at full width, so
a word that fit as set moved down to a wider line. It also ended at any
break opportunity, so an opening bracket counted without the character
kinsoku keeps with it and could be placed alone on a line too narrow
for that character.
- word_width ends the word only where break_line may end a line: at a
cluster end that kinsoku allows, not inside a No Break run, whose
spaces count. It leaves out the spaces at the word's end and narrows
its last glyph by the Mojikumi line-end credit.
- place_flow_line measures the word after the opening-bracket trim, and
the Every-line Composer's first-line placement takes off the same
start credit, so the composed widths match the placed lines.
With Line-end Punctuation Half Width, a closing bracket, comma or full
stop ending a line is set half width, but both composers measured it at
full width. A closing bracket that fit only at half width went to the
next line with the character before it, and so did a comma or full stop
with Burasagari None.
The single-line and every-line composers now measure each candidate
line with its last character set as narrow as Mojikumi sets it, using
the same rule the line is drawn with. A mark that already lost its half
to the punctuation after it and a line ending in a hyphen take nothing
more off, and the quarter em between Japanese and Latin text counts only
where the line ends. Kinsoku Shori Type measures the pushed-in and
pushed-out lines the same way. Right-to-left lines and Mojikumi None
break as before.
A test font sets ideographs and Japanese punctuation one em wide, so
the layout tests run without system fonts.
The harakat test now runs on the in-memory Arabic test font in every
environment, as well as on an installed Arabic face, and checks that
the line is the space longer.
paint_only ignores kerning_before, as drawn_alike does: a space before
a line's first letter, set on the letter alone, no longer splits it from
its harakat coloured apart.
- drawn_alike ignores kerning_before, so a space before the "f" of "fi"
no longer splits the ligature.
- SVG export takes a line's starting space from kerningBefore and the em
shaping sets the character in (vectorcraft_text::line_start_space),
not from where the glyph is drawn, which can include a shaping offset;
the reader layout for justified lines leaves the space out, so those
lines start there too.
- Type on a path writes the space as the first character's dx; a space
after a line break, which <textPath> can't write, is outlined.
At the Type tool's caret, kerning goes on the character before the caret.
At the start of the text there is none, so Alt+arrows, the Kerning field
and Reset Tracking and Kerning did nothing; at a later paragraph's start
the kerning landed on the invisible line break.
CharStyle::kerning_before (kerningBefore) is the space before a character
that starts a line by itself: the first character of the text, of a
paragraph, or after a forced line break. Shaping gives its cluster the
space and draws it that much later along the line (right to left the
space is at its right; in vertical type it moves down the column). The
caret at such a line's start sets it (edit::caret_kerning_target), in
type.step, type.resetTracking and the Character panel; text.setRangeStyle
takes it. SVG export starts the line where the character is drawn. The
Eyedropper and character styles leave it alone.
Type › Dynamic Text (`type.dynamicText`, also on the Contextual Task Bar
for type on a path) scales the text by one factor so it fills the span
between its start and end brackets, and the layout fits it again after
each edit to the text, the path or a bracket. The first character's
size moves in 0.1 pt steps within 0.1 to 1,296 pt. Turning it off, or
threading the type, keeps the sizes it was drawn at.
- The model saves `dynamicText` only when on.
- SVG, the legacy .ai writer and the .ai editing data write the drawn
sizes through `vectorcraft_text::drawn`; the editing data warns that
the setting is not written.
- Shrink Text to Fit and Dynamic Text step the size the Character panel
shows when a size measures the cap height, x-height or ICF box.
Docs: docs/mcp.md, docs/type-parity.md, docs/target-app-parity.md.
Part of #4134.
A centred or right-aligned line of tracked type was measured with the
tracking after its last character, so it sat half that tracking
(centred) or the whole tracking (right-aligned) left of where the page
of users' .ai files draws it. That page aligns a line as wide as its
characters without that tracking.
Shaping now records the tracking each glyph's advance holds
(SGlyph::tracking), and a line that isn't justified leaves its last
character's out of the width it is aligned by. The last character is
the last one the line draws before a paragraph's end, a forced line
break or the spaces a wrap leaves; spaces or a tab typed before a
paragraph's end or a forced line break keep the letter's tracking, as
the page does. Forced line breaks and wraps aren't in the files: they
follow the rule so that turning a wrap into a paragraph or a forced line
break keeps the line in place. Hyphenated lines, lines whose last
character hangs, vertical and right-to-left lines and type on a path
keep it. The tracking stays in the glyph's advance, so the caret,
selections, line breaking and Fit Headline are unchanged.
LineInfo::trailing gives the amount. Right-aligned area type sets the
text after its last tab the same way.
What aligns by line widths follows. Convert To Area Type makes its
frame end where the lines are aligned, with room for the tracking, so
tracked type converted either way stays in place. Affinity import lines
up differently aligned paragraphs of artistic text by the aligned
widths. SVG import moves a centred or right-aligned letter-spaced line
back by its share of the last letter spacing, so it stays where a reader
draws it and SVG export, which anchors lines at the end of their
advances, reads back unchanged.
Centred and right-aligned tracked type lays out differently than before
in every document.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
In horizontal type, tracking and manual kerning are now thousandths of
the em as the Horizontal Scale draws it: at 50%, a tracking of 100 adds
0.05 em after each character. They were added at the full em while the
glyph advances took the scale, so narrow tracked type drifted from the
page of users' .ai files letter by letter. That page writes such type's
character spacing as the tracking itself in a text space as wide as the
scale, which PDF scales by it (ISO 32000-1 9.4.4). Vertical type keeps
the full em: its advances down the column don't all take the scale.
vectorcraft_text::spacing_scale gives the factor. Shaping, inline
graphics and the Optical pairs use it, and so do the conversions from
points back to thousandths of an em: the automatic kerning the Character
panel reads and Touch Type's limits (glyph_em), Combine Point Text, and
PDF import, whose tracking is now the file's Tc. Scale Text Attributes
now keeps tracked type where a horizontal stretch drew it.
SVG export writes letter-spacing in thousandths of the font size it
writes (the vertical scale), so uniformly scaled type keeps its spacing
in a viewer.
Type with both a Horizontal Scale other than 100% and tracking or manual
kerning lays out differently than before, in every document.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
On a vertical path, an upright glyph is now placed in its column as
vertical point type places it, then the column is centered on the path.
- Its cell starts at its place on the path; it started 0.12 em earlier
with fonts whose cell top is less than a full cell above the baseline.
- A baseline shift moves it across the column instead of along the path.
- A horizontal scale widens it evenly about the column's center.
- A combining mark stays on its upright letter.
- The caret and the selection highlight span the column, half its em on
each side of the path, instead of the font's ascent and descent.
With Skew, 3D Ribbon and Stair Step on a path that runs to the left,
letters are a quarter turn counterclockwise from upright glyphs: Skew and
3D Ribbon mirror both kinds there, and Stair Step keeps letters level. The
test, the progress doc and the params text of Tate-chu-yoko Settings now
state these conditions and the block's directions on a path.
Follows #5557. Letters and digits lying on their side in vertical type on
a path kept their top toward the path's end, opposite the upright glyphs.
They are now set as horizontal type on the path sets them: baseline along
the path, top to the path's left, a quarter turn clockwise from upright
glyphs (CSS Writing Modes 3, Unicode UAX #50).
- The column is centered on the path: upright glyphs, letters on their
side and tate-chu-yoko blocks have their em box centers on the path
line instead of a column one em wide to the path's right.
- Upright glyphs are turned in the path effect's glyph space, so with
Skew on a curve their top runs back along the tangent and their x axis
stays up the page, as letters keep theirs.
- Tate-chu-yoko blocks on a path stand upright, stay whole on a curve and
move by Tate-chu-yoko Settings toward the path's start and left.
- A tate-chu-yoko block of mixed sizes sets every glyph in its first
character's em, on a path and off it.
Existing vertical type on a path redraws with these placements.
Shaping split a cluster wherever two characters' styles differed, so
setting Standard Vertical Roman Alignment or a tate-chu-yoko offset on the
f of "fi" in horizontal type broke the ligature. Horizontal type does not
read those settings, so they no longer split a cluster there. Vertical
type still shapes such characters apart.
Two installed versions of one font are two fonts of the set, so each
keeps its own /5. The generated variable test font now has a version
(name ID 5), and the test checks each variable record writes it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
BFlat