Commit Graph
26 Commits
Author SHA1 Message Date
dotCooCoo 8b0effde6b Trim at Crossings: the selection is updated in one pass
A trim checked and changed the selection once for every trimmed path
and every piece, and each check or removal went through all selected
objects, so a trim of thousands of selected paths spent time
quadratic in their number on the selection alone. The command now
reads the selection through a set and removes and adds objects once
at the end. The resulting selection is the same as before, including
object order, the key object and key anchor, the direct-selected
anchors and segments, and the fields that a change to the object
selection clears.
2026-11-16 11:30:08 -08:00
dotCooCoo 83f21f4496 Path Precision Tools: Common Tangents adds the centerline between tiny paths
The centerline was left out whenever the two centers were less than 1e-9
points apart, so two separate paths a billionth of a point wide got their
tangents but no centerline. Centers now count as one point only when they
are closer than a billionth of the larger path's size.
2026-11-15 19:36:17 -08:00
dotCooCoo 1041a5c528 Merge main into feat/common-tangents 2026-11-15 18:44:19 -08:00
BFlat 765334b9a6 Merge pull request #8010 from dotCooCoo/feat/tangent-circle
Path Precision Tools: Tangent Circle draws the circles that touch two or three shapes
2026-11-16 09:33:03 +07:00
dotCooCoo 4ad75291cb Path Precision Tools: Tangent Circle draws the circles that touch two or three shapes
Object › Plug-ins › Path Precision Tools › Tangent Circle…
(`addon.pathtools.tangentCircle`) draws the circles that touch two
selected paths or compound paths at a set radius, or that touch three of
them. A circle touches a shape when it meets the outline without
crossing it, with the whole outline outside the circle or inside it: at
a smooth point it is tangent there, and at a corner or an open end it
passes through that point. Circles, ellipses at any angle and other
closed or open paths all work; the members of a compound path count as
one outline.

When every shape is a circle, the circles are found in closed form (up
to eight for three circles, the problem of Apollonius) and then moved
onto the drawn Bézier circles, which differ from true circles by up to
0.0273% of the radius. Other shapes are searched on a grid, and the
centers left are refined with Newton's method on the curves. With three
shapes, circles up to 64 times the diagonal of the box around the
shapes' anchors and handles are found.

The circles are listed by radius, then top to bottom, then left to
right. The dialog takes the radius (with two shapes; 36 pt to start)
and previews every circle found or one picked by number; OK draws them
with the current paint as one undo step, selected. No circle, more than
64 circles (shapes touched along a whole curve, such as two concentric
circles), shapes at one point or too small for the radius, more than
2000 segments and a search past its limits are errors that leave the
document unchanged.

The Tangent Circle and Circle: rows are in every catalog, and the
command's messages in the catalogs that translate messages.

Docs: docs/mcp.md (Path Precision Tools add-on),
docs/target-app-parity.md, docs/ui-parity.md and ROADMAP.
2026-11-15 16:37:17 -08:00
dotCooCoo 0189417e24 Path Precision Tools: Common Tangents draws the lines touching two closed paths
Object › Plug-ins › Path Precision Tools › Common Tangents…
(`addon.pathtools.commonTangents`) adds the common tangent lines of two
selected convex closed paths as separate open paths: external (both
paths on the same side of the line), internal (the lines between them)
or all, and with Centerline the line joining the two centers. An
ellipse drawn with the Ellipse tool is measured as an exact ellipse at
any rotation and scale; any other path must be closed, have one outline
and bend the same way all around, with at most 10000 segments.

Each line runs between the points where it touches the two paths, or
covers a straight side that lies along it. Separate paths have four
tangents, overlapping paths only external ones (two for ellipses), and
a path inside the other none. Paths that touch, from outside or from inside, share
one tangent instead: a line centered on the point where they touch and
as long as the narrower path is wide along it. When there is no tangent
of the kind asked for, nothing changes and the result carries a warning
that says why. The lines take the current stroke and no fill, go
directly above the upper path and are selected, as one undo step. The
dialog has Preview.

The geometry is in vectorcraft-pathops: the tangents are the zeros of
the difference of the two outlines' support values over the normal's
angle, sampled at 720 even steps and at every angle where either
path's touching point passes to another segment, then refined, so the
work per pair is bounded.

Catalog rows for the menu item, the dialog and the messages are in
every catalog.

Docs: docs/mcp.md (Path Precision Tools add-on), docs/target-app-parity.md
and ROADMAP.
2026-11-15 13:48:21 -08:00
dotCooCoo 5bba196c4f Path Precision Tools: Trim at Crossings shows the stretch a click would remove
Hovering with the Trim at Crossings Tool draws in red the stretch a click
there would remove, on the same paths and by the same rules as the click,
and nothing over empty canvas or hidden and locked paths. A drag draws
every stretch its rectangle or freehand line would remove while it
reaches at most 32 paths. In isolation mode only paths inside the
isolated object are highlighted.

What a pick removes moves from the command into
vectorcraft_tools::addons::trim::plan, which the command and the tool
both use. A preview spends at most a twentieth of the crossing work a
click may (Work::share); past that it shows nothing, and the click or
release still removes what it reaches. The tool keeps the crossings it
found for the document as it is, so moving along one path does not
search again, and kept crossings still count against a pick's work
budget. Work::spent_since and Work::draw in vectorcraft-pathops measure
and charge that work.

Docs: docs/mcp.md, docs/ui-parity.md, docs/target-app-parity.md.
2026-11-15 11:24:17 -08:00
dotCooCoo a5493a1cd0 Paths: editing one anchor of a long path keeps one chunk of anchors for undo
A subpath's anchors are now an `Anchors` list held in chunks of up to
256 anchors behind `Arc`s. Copying a path copies the chunk table and
shares the chunks, and editing one anchor copies only the chunk that
holds it, so the undo step of a one-anchor edit no longer keeps a copy
of every anchor of the path. Inserting or removing an anchor copies the
chunk it is in and rebuilds the table. Reads and edits follow the Vec
and slice methods the code used; files write and read each subpath's
anchors as one list, as before, within the same anchor read budget.

The undo memory estimate counts only the chunks the other version of
the path does not hold, and the renderer's kept paths compare only the
chunks an edit copied when they look for moved anchors.

Moving one anchor of an open path of 10,000 or 200,000 anchors
(path.moveAnchor, path.setHandle, path.moveAnchors, a nudge) keeps at
most 48 KiB in its undo and redo steps, where it kept 56 bytes per
anchor.
2026-11-14 21:25:15 -08:00
dotCooCoo 93a7d532c7 Merge main into feat/rotated-box-scale-reflect 2026-11-14 15:17:16 -08:00
dotCooCoo adc60bfb16 Merge main into feat/rotated-box-scale-reflect 2026-11-13 16:42:07 -08:00
dotCooCoo 187032fbb2 Path Precision Tools: Corner commands refuse unknown item keys
addon.pathtools.cornerSet and cornerRemove now refuse a key other than
id and anchors in an `items` member, with the standard unknown-parameter
error, instead of ignoring it. A misspelled `anchor` used to fall back
to the request's `anchors`, else the path's direct-selected anchors,
else every corner of the path. They also refuse `items` given together
with `ids`, which `items` replaces. Saved steps played with replay
still run as recorded.

Docs: docs/mcp.md, docs/target-app-parity.md.
2026-11-13 16:03:08 -08:00
BFlat e21e2622d0 Merge pull request #7281 from dotCooCoo/fix/path-precision-picks-one-pass
Path Precision Tools: group selected segments and crossings by subpath in one pass
2026-11-14 05:40:21 +07:00
dotCooCoo 4276245469 Path Precision Tools: group selected segments and crossings by subpath in one pass
Add Points and Divide into Dashes read each subpath's selected segments
with a range lookup in the path's ordered segment set instead of
filtering the whole set once per subpath. Add Points at Crossings and
Split at Crossings sort a path's crossing places into a list per
subpath once, in the order they come, instead of filtering the whole
list for every subpath. Places on a subpath that no longer exists are
still left out. The results are unchanged.

Tests cover paths with several subpaths, an empty subpath, an
untouched subpath and selection on the last subpath, for all four
commands, plus the anchor fallback and the grouping of out-of-order
crossing places.
2026-11-13 12:39:13 -08:00
dotCooCoo b1c9783e40 Tests: expect scale to follow the rotated bounding box
A stretch of a turned star along its own box keeps it a parametric shape;
the page-axes stretch that skews it now passes basis "page". The no-op
transform test expects the scale's journal entry to carry its basis.
2026-11-13 10:54:42 -08:00
dotCooCoo e25795f73e Path Precision Tools: Trim at Crossings leaves clipping paths and art outside isolation alone
- The clipping path of a clip group or a clipped layer takes no part,
  the members of a compound clipping path included. Before, only a
  plain clipping path was left out.
- In isolation mode only paths inside the isolated object are trimmed;
  paths outside it still count as crossing.
- A rectangle or line that reaches so many paths that comparing their
  boxes would take more than 50,000,000 tests is refused before any
  work starts.
- A tool drag that goes 3 screen pixels or more from the press stays a
  rectangle or line when it ends near the press. Before, it ran as a
  click and could remove a whole path the final rectangle did not
  touch.

Docs: docs/mcp.md.
2026-11-13 10:44:07 -08:00
dotCooCoo 3a336fd32f Path Precision Tools: Trim at Crossings removes the stretch of a path between crossings
The new Trim at Crossings Tool removes stretches of paths between the
places where they are crossed by another path or by themselves. A click
removes the stretch under the pointer, a drag removes every stretch its
rectangle touches, and an Alt-drag removes every stretch its freehand
line crosses. It works on every path that can be edited, selected or
not, and each gesture is one undo step.

- `addon.pathtools.trim {at, tolerance?}`, `{rect}` or `{points}` is the
  command behind the tool. A closed path that loses a stretch becomes
  open, an open path that loses a middle stretch becomes two paths with
  its appearance in its place in the stacking order, and a path that
  nothing crosses is removed whole. The stretches that stay get no new
  anchors.
- Hidden and locked paths, guides and clipping paths are not trimmed and
  do not count as crossing. Only the paths the gesture reaches are
  searched for crossings, and one work limit covers every path the
  command trims.
- `crossings_on` and `crossings_on_within` in `vectorcraft-pathops` find
  the crossings on one path and compare it only with the segments in
  its box.
- The new tool shares the crossing search with Add Points at Crossings
  and Split at Crossings, so those change too: two segments of a path
  that meet at an anchor, directly or across segments with no length,
  now count as crossing where they cross again away from that anchor,
  and do not count as crossing at the anchor itself. With Self
  Crossings, a curved segment that loops over itself counts as crossing
  itself. Before, both crossings were missed.
- The tool is an add-on tool: Object › Plug-ins › Path Precision Tools
  and the All Tools drawer list it, it has no shortcut, and neither
  shipped toolbar shows it.

Docs: docs/mcp.md, docs/ui-parity.md, docs/target-app-parity.md.
2026-11-13 09:24:53 -08:00
HassanKhan b3860bf7d0 Commands: every angle and rotation param says which way it turns (#6340)
The params docs now state the direction (and the zero) of each angle or
rotation a command takes; behaviour is unchanged. Shape creation, text.create,
the grids, add-on shapes, saved views, Liquify, Puppet Warp pins, Mirror and
Radial Repeat and Vector Halftone turn clockwise; text character rotation,
gradients, the eraser tip and print screen angles turn counter-clockwise.

view.saved.new's rotation note changes its schema, so the API level goes to 3.

A test walks every command's params doc and fails when a param named like an
angle or rotation doesn't say clockwise or counter-clockwise.
2026-11-11 21:40:27 +05:00
Don Omondi 62c6d42dff Set Corners: round only the corners in an angle range (#5545)
Squashed from #5737 onto main.
2026-11-05 11:04:52 +07:00
Don Omondi 7aa759d4de Set Corners: round all, odd-numbered or even-numbered anchors (#5546)
addon.pathtools.cornerSet takes `every` ("all", "odd" or "even"; default
"all"), which keeps, of the anchors already chosen (named, direct-selected
or all), only the odd- or even-numbered ones, counted along each path from
its first anchor as number 1. Anchors that take no corner still count, so
the pattern follows the path's anchor order on open and closed paths; when
nothing is left the command says so. Unknown values are refused.

Object › Plug-ins › Path Precision Tools › Set Corners… (also a button in
the Anchor Inspector's Corners section) opens a dialog with Radius, Corner
kind and Anchors (All / Odd-Numbered / Even-Numbered) that previews on the
canvas and commits as one undo step.
2026-11-05 10:42:37 +07:00
bflatastic 84336967aa Fix #4922: Expand Dashes into Paths 2026-11-01 09:08:07 +07:00
bflatastic 9e3f8dccec Fix #4950: Path Precision Tools: Divide into Dashes
addon.pathtools.divideDashes cuts the selected paths (or only their
direct-selected segments) into separate open paths of a dash length
measured along the curve, with an optional gap (gap pieces dropped
unless removeGaps is false) and Fit to Corners and Ends; pieces keep
the path's appearance, one undo step, at most 100000 pieces. Geometry
in vectorcraft-pathops; dialog with unit fields and Preview; tests,
sweep cases, catalog rows and docs.
2026-11-01 02:44:16 +07:00
bflatastic 79f7b393e9 Add-ons: Path Precision Tools — Shared Edge Merge
Path Precision Tools gains the Shared Edge Merge Tool, kept out of the
toolbars (All Tools drawer and Object › Plug-ins › Path Precision Tools,
no shortcut), and Keep Shared Points Together:

- Shared Edge Merge Tool (sharedEdge): over two paths touching at two
  coincident anchors (tolerance 0 to 3 pt) hovering shows the two
  stretches and the merged edge; a click replaces both with it, half way
  between them, or following the upper (Shift) or lower (Alt) path. Both
  paths stay closed or open, anchors either stretch has inside are
  matched on the other, one undo step.
- Making ends: near anchors meet on a click and an anchor one path lacks
  is added to match; Shift+Alt asks for this inside a stretch.
- Keep Shared Points Together: an option that makes Slide Anchor Along
  Path, Extend Path and Set Anchor take coincident anchors along. Nothing
  else in the app changes.
- Shared Edges section in the Anchor Inspector: brush diameter,
  coincidence and the option.
- Commands addon.pathtools.mergeEdge and movePointsTogether, params
  validated and covered by the command sweep.
- Cursor stand-in, catalog rows in every language, docs and tests.
2026-10-31 07:16:22 +07:00
bflatastic e13c4bc9d0 Add-ons: Path Precision Tools — live path effects 2026-10-31 06:10:47 +07:00
bflatastic c9dc4fa857 Add-ons: Path Precision Tools — Corner Tool and Slide Anchor
Path Precision Tools gains two tools, kept out of the toolbars (All Tools
drawer and Object › Plug-ins › Path Precision Tools, no shortcuts):

- Corner Tool (cornerTool): editable corners on any path through the
  existing Live Corners. Hover shows an eligible anchor, a click cuts a
  corner with the tool's radius and kind, a drag sizes it (Shift: whole
  values), a corner's marker selects it and loads its values, resizes it
  and removes it at 0 or on a double-click; a corner never grows past
  what fits; an Alt-marquee cuts every eligible anchor inside.
- Corners section in the Anchor Inspector: radius, kind, selected count,
  Apply to Selected Anchors.
- Slide Anchor Along Path (slideAnchor): a drag runs an anchor along its
  curve, the neighbouring segments refitted by the keep-shape kernel;
  Shift snaps where the tangent is a multiple of 45° from the constrain
  angle.
- Commands addon.pathtools.cornerSet, cornerRemove and slideAnchor, one
  undo step each, params validated and covered by the command sweep.
- Cursor stand-ins, catalog rows in every language, docs and tests.
2026-10-31 04:21:26 +07:00
bflatastic 27ed249b1f Add-ons: Parametric Shape Tool — re-editable stars, polygons, rings, arrows, gears and more
Path Precision Tools gains the Parametric Shape Tool: ten kinds of shape
(rectangle, ellipse, polygon, star, ring, arrow, cross, heart, gear,
speech bubble) that stay editable as numbers.

- Geometry in vectorcraft_pathops::addons::pathtools::shapes: each kind's
  outline, corner rounding limited to the middle of a side, a fingerprint
  of the outline, recovery of centre, size and rotation after a move,
  turn or scale, and recognition of plain rectangles, ellipses and
  regular polygons.
- The tool (parametricShape, All Tools drawer and Object › Plug-ins ›
  Path Precision Tools only, no shortcut): drag from the centre (Shift:
  45° steps), arrow keys change the count and values while dragging,
  handles edit a selected shape, double-click places one.
- Commands addon.pathtools.shape.create / .set / .convert, one undo step
  each; params checked (counts 3..1000, sizes up to 16384 pt).
- A shape keeps its numbers in one object-data entry (vc-pathtools-shape)
  that SVG export already leaves out; anchor edits make it a plain path.
- Parametric Shape panel, cursor stand-in, catalog rows in all 25
  languages, docs and tests.
2026-10-30 20:55:14 +07:00
bflatastic dc7f147608 Add-ons: Path Precision Tools — anchor eraser brush, extend path, measure, anchor inspector, crossings
A built-in add-on under Object › Plug-ins › Path Precision Tools:
- Anchor Eraser Brush: painting over selected paths removes the anchors
  under the brush that the outline can do without within a tolerance,
  refitting the handles beside them (Alt ignores the tolerance, Cmd/Ctrl
  deletes without refitting, pen pressure can scale the brush); one undo
  step per stroke.
- Extend Path tool: dragging an end of an open path carries it on
  straight, by stretching its last curve or along the circle it curves
  on, or shortens it back along itself.
- Measure & Inspect tool: drag to measure distance and angle; hover a
  path to read segment and path length, area, curvature, tangent and
  anchor angles and handles, in the document's units.
- Anchor Inspector panel: the selected anchor's position and handles as
  numbers, with Make Smooth (auto-smooth rule), Make Corner, Equalize
  Handles, Remove Points Keep Shape, Add Points and three ways to close.
- Add Points at Crossings and Split at Crossings.

The tools stay out of both toolbars as shipped; the All Tools drawer
lists them under the add-on's heading. Commands are addon.pathtools.*;
the existing commands, tools and menus are unchanged.
2026-10-30 15:20:38 +07:00