The saved throw sites of running finally blocks are kept in rising slot
order, so leaving a frame or a block now removes entries from the end of
the list and stops at the first one below the slot. Before, every return
looked at every saved site, so a call made inside many nested finally
blocks took time in proportion to their count.
vectorcraft-js and Check Script took identifier categories from
unicode-general-category 1.1.0, which carries Unicode 16.0, so letters
and marks assigned in Unicode 17.0 (U+088F at the start of a name,
U+1ACF after its first character) were refused. Both lexers now read
general categories from unicode-properties 0.1.4 (Unicode 17.0), which
Cargo.lock already holds. The version is exact because 0.1.5 adds the
Unicode-3.0 license, which is not on the license allowlist. The
Other_ID_Start, Other_ID_Continue and Pattern_Syntax lists are the same
in PropList 17.0.
The exhaustive identifier test now expects the DerivedCoreProperties
17.0 totals (145,916 ID_Start, 149,240 ID_Continue), and new tests read
U+088F and U+1ACF written out and as escapes in both lexers.
Resetting Folder.current for the next run of a named engine now drops the
last run's uncaught exception and $.error first, so memory only they held
no longer makes the reset fail with the heap limit on every later run.
A File an earlier run left open now counts as closed in a later run:
setting its encoding stores it for the next open, and reading the encoding
gives the stored one.
docs/mcp.md: engines stay on the thread that made them, and a
#targetengine line in a file $.evalFile runs makes that call throw a
SyntaxError when it runs.
A `return` inside a finally block discards the pending exception, but the
saved throw site for it stayed in the list of collection roots. The code it
pointed to then stayed live after the function was gone, which could stop a
script with the heap limit when that code came from `Function` or `eval`.
Returning from a frame now drops the saved sites for the slots it leaves.
Follows #6653.
random_seed passes the OS random source's result to random_seed_from, so a test can
give it a known value and check the seed it makes, instead of only reading the source text.
A script whose first lines name an engine with `#targetengine name` (or
`//@targetengine name`) runs in that engine, and a later script that names
it sees the globals and functions earlier runs left, until the engine is
dropped or the session ends. A script without the line, and
`#targetengine main`, still get a new engine for each run.
- A session keeps at most 8 named engines, each with a 64 MiB heap. A run
that goes past the heap ends with the heap limit, and the engine stays
usable. Names are 1 to 64 bytes. The line comes once, in the script
itself, before its code and its #include lines.
- An uncaught error, a limit or script.stop puts the documents back and
keeps the globals the run set. An internal error drops the engine. A run
stopped at a dialog or left paused ends where it was before the engine
is kept. An error in a function an earlier run defined is reported
without a line and column.
- `vc`, `$`, `alert`, `confirm` and `prompt` are made once for each engine
and act for the run that calls them, including copies an earlier run kept
in a global. `vc.args` gives a read-only copy of the calling run's
`args`, and what a run sets on `$` lasts for that run only.
- `script.engines` lists the named engines with their heap, and
`script.engine.drop {name}` drops one. Scripts cannot run either.
- The engines stay on the thread that made them. A session used on
another thread starts there with no named engines, and the old ones are
dropped on their own thread.
- The web build has no named engines: a run that names one other than
`main` ends with an error before any of it runs.
- `Realm::end` ends a run where it is, `Realm::error_source` counts from
the realm's last script, and `HostItem::FrozenGetter` gives a frozen
value each time it is read.
- The script checker lists `#targetengine` as a supported directive.
Docs: docs/mcp.md, docs/target-app-parity.md, docs/gaps.md.
An error a finally block passed on unchanged was reported at the end of
that block, in script.run's report and in the Script Console, because the
block's end raised the error again at a new site. The interpreter now keeps
the site of the exception each finally block runs for, keyed by the stack
slot that holds it, and the block's end throws the exception on from that
site. This holds through nested finally blocks, called functions, resumed
runs and marked host errors. An error the finally block throws is reported
at that throw, and one its return, break or continue discards is not
reported.
Each realm seeded Math.random from std's RandomState. On
wasm32-unknown-unknown its keys come from stack and heap addresses,
which are the same on every page load, so scripts in the web build
drew the same sequence each time the page opened.
The seed now comes from getrandom (crypto.getRandomValues in the
browser, as crates/pdf/src/encrypt.rs already does), with RandomState
kept as the fallback when it fails.
The test for new XML with a one-item list now starts from an item that
has a parent, an attribute and a child. It checks that the copy has no
parent and that changing the copy's attribute and child leaves the
original unchanged, so a copy that drops or shares the children fails.
new XML(list) now returns a deep copy of the list's single item, as
ECMA-357 section 13.4.2 specifies for an XMLList argument; before, it
returned the item itself, so changes to the new value changed the list.
insertChildAfter and insertChildBefore take one unit of fuel for each
child they compare with the reference, as childIndex does.
The test for the missing xpath method now checks the XML and XMLList
prototypes; reading .xpath on a value selects child elements and
returned an empty list in every case.
addNamespace and setNamespace now add a declaration's bytes to the heap total when the element
gains a new prefix, and QName.prototype.toString adds the bytes of the string it returns. Before,
both only checked for room, so a loop of distinct prefixes could grow an element past the heap
limit until a collection recounted it.
- A list copy holds each new copy as a root while the list is charged
for it, so a collection at that point no longer frees the copy. Before,
`x.setChildren(<c/> + <d/>)` near the heap limit could leave one child
twice or end with an internal error.
- An assignment to a path such as `x.a.b = v` or `x.a.b[0] = v` removes
the elements it added for the path when a later step stops at a limit
or throws.
- Comparing XML values counts the attribute tables and the work stack
against the heap limit.
Scripts get the File and Folder classes as built-ins of the script
engine. A script run from a file can test whether files exist, read
their properties, list folders with getFiles (a mask or a function),
and open files to read them with read, readln, readch, seek and tell.
- Reads stay inside the script's folder and, when automation read
roots are set, inside them too. A script given as text reads no
files. Network and device paths, and paths outside the folder by
their names, are refused before anything is looked up. Links and
junctions that lead out are refused, and getFiles leaves them out.
- The encoding comes from the byte order mark, then the encoding the
script set, then UTF-8 when the bytes are valid, then CP1252.
- Limits: 8 MiB a file, 32 MiB a run, 256 files open at once, 2,048
getFiles entries and 65,536 names looked at, and paths of at most
32,767 characters.
- Writing, the file dialogs and execute are not available yet: they
return false or null and set error.
The report's hostCallCounts gains fileCalls and fileExecutes.
Docs: docs/mcp.md, docs/target-app-parity.md.
An exception that a finally block passes on, or one that leaves a
built-in's callback, no longer becomes $.error again over an error thrown
after it; throwing a caught error again still makes it the last one.
$.sleep with more than 0 inside a getter, a conversion or a built-in's
callback now throws whether or not the platform has a clock, so the web
build throws there as the other builds do.
The compiler now keeps a function declaration's name with its code, so
$.stack no longer shows [anonymous] for a declared function that is
called after the function that declared it has returned. The member test
expects "Web" for $.os in the wasm build, as the engine gives there.
A marked host error whose finally block was left by return, break or
continue kept its entry, and its error object, until the run ended. A
script that discarded many of them reached the heap limit. Each entry
now records the stack slot that holds its exception, and entries whose
slot no longer holds it are removed before the next exception is handled
and before each collection.
A getter, a conversion, a callback of a built-in function or a file
$.evalFile runs is executed on native frames, so the run cannot stop at a
$.sleep there. Such a call used to only mark the run to pause, so the
code after it ran first and the wait came later. $.sleep with more than 0
milliseconds now throws an Error there, as alert, confirm and prompt do.
toSource checked the 16,777,216-unit length limit only after a whole
string was written. A long string of characters that are escaped could
reach the heap limit first, which ends the run instead of throwing a
RangeError. The limit is now checked before each part is added.
A failure $.evalFile raised for a file it could not run was placed by
matching the uncaught error's message against the last such failure. A
script that caught the failure and threw it again later, or threw a new
error whose message held its text, was reported at the failed file's line
instead of the second throw.
The failure now carries a mark (HostError::Marked) with the exception.
A catch clause drops the mark, a throw raises the value without one, and
a finally block that ends normally throws it on with its mark, nested
finally blocks included. Realm::error_mark gives the mark of the error a
run ended with, and the engine looks up the file, line and column by it.
`#strict on` and `//@strict on` no longer end the run as unsupported. They
turn on the checks the dollar-object help page gives for `$.strict`
(https://extendscript.docsforadobe.dev/extendscript-tools-features/dollar-object/):
an assignment to a read-only property throws a TypeError, and so does a new
property on an object that takes none.
VectorCraft's own rules: a getter-only property counts as read-only; the
objects that take no new properties are the non-extensible ones
(preventExtensions, seal, freeze, and the frozen vc and $ objects); the last
`#strict` line of the script and its includes sets the whole run, and runs
without one are unchanged; eval and Function take the checks of the code
that compiles them; a file $.evalFile runs keeps its own line's checks for
its code and functions, or takes the caller's without one. The rest of ES5
strict mode stays with 'use strict'.
The js crate carries the setting per compiled source
(Realm::set_strict_writes, and a strict_writes callback on
HostItem::Evaluator), and applies it only to property assignments.
A script's $ object now has the other members the Dollar object page
lists: about, appEncoding, bp, build, buildDate, colorPicker,
decimalPoint, engineName, error, flags, gc, getenv, setenv, global,
hiresTimer, level, line, locale, localize, memCache, os, screens, sleep,
stack, strict and version. Scripts also get the global
localize(object, ...values), toSource(value) and
Object.prototype.toSource().
Each run starts with the interface's locale and its own $ state;
$.setenv changes only the run's copy of LANG, LC_MESSAGES, LC_ALL and
OS, and $.getenv returns null for every other name. $.sleep waits from
0 to 1,000 ms between frames, and script.stop ends the wait. toSource
writes plain data only and throws on cycles, getters, host objects and
values past the data limits.
The script checker reports $.localize as a $ member instead of the
global localize function.
alert(message[, title, errorIcon]), confirm(message[, noAsDflt, title])
and prompt(message, preset[, title]) are globals in a script run. In the
app the run waits at the call for the person's answer, spends no
instructions while it waits, and every dialog has Stop, which ends the
run and puts every document back. A run over MCP or the command line
takes its answers in order from script.run's answers, a list of
{kind, value} records; a missing, mismatched or unused answer ends the
run. The report lists each dialog with its answer in dialogs, with
dialogCount and dialogsTruncated.
The interpreter gains a host call that waits at the call for its
result, from the script's own code only; a dialog called in a callback
of a built-in, a getter or a conversion throws in the app.
Docs: docs/mcp.md, docs/target-app-parity.md.
Before a script runs, `script.run` reads its preprocessor lines (`#` or
`//@` at the start of a line, outside strings and comments):
- `#include` and `//@include` put another file's text in place of the
line, looked for beside the including file, then in each
`#includepath` folder, then in each `JSINCLUDE` folder. A later
`#includepath` replaces the list.
- `#script` names the run unless `name` is given; `#target` takes any
value; `#strict off` is taken. `#strict on`, `#targetengine` and
`#engine` are refused as unsupported, and any other `#name` as
unknown.
`$.evalFile(path, timeout?)` runs a file in the same global environment
and returns its last value, `$.fileName` is the file being run and
`$.includePath` the include folders.
A script run from a file reads these files only in its folder and the
folders below it. Paths with a `..` name, links or junctions that lead
out, device names, streams and network paths are refused; a script
given as text reads none. A run reads at most 64 files 16 levels deep,
32 MiB of source in all and 1,024 paths looked up. An error in an
included or evaluated file is reported at that file's line and column,
and the report's new `file` field names it.
Docs: docs/mcp.md (script.run, Script Console), docs/target-app-parity.md.
Scripts write to a new Script Console with $.write(...values) and
$.writeln(...values), each value as String(value) gives it. vc.log
entries, a run's uncaught error as name:line:column: message, and a
start, end and report line for each run go there too. The report line
gives the run's time, host calls and slowest commands.
- The console keeps at most 2,048 lines and 1 MiB of text, dropping the
oldest and counting what it dropped. A line is cut at 4,096 bytes and
a script's name at 256 bytes, with a count of cut lines. Line feeds,
carriage returns and CRLF break lines; other control characters show
as Unicode Control Pictures.
- script.run's result and scriptReport gain runTimeMs, timingAvailable,
hostCallCounts, slowestCommands and the run's own console. A failed
run's report has them too.
- script.console and script.console.clear read and empty the console;
ui.copyScriptConsole {first?, last?} copies lines as the panel shows
them.
- The panel lays out only the rows in view, selects with click and
Shift-click, and has Clear, Copy Selected and Copy All. Output goes on
while it is closed, and Clear works during a run.
Docs: docs/mcp.md, docs/gaps.md, docs/roadmap.md,
docs/target-app-parity.md.
The interpreter runs skipped every test with a missing built-in's name
anywhere in a string literal, so a test that only mentions Boolean in
a message or in text data was never run. A string now counts when it
is the name alone (a property key such as this["Map"]), or when the
test or an included harness file can run strings as code (eval,
Function or a constructor property, by name or by string key).
Identifiers and property names count as before, and a source that does
not tokenize as ES5 is still skipped.
At tc39/test262 d53ebc8b, language/types/string/S8.4_A6.1.js and
S8.4_A6.2.js now run and pass: the language run goes from 2,459 tests
(205 skipped) to 2,461 (203 skipped), and the failure lists are
unchanged.
- A new test walks every code point from U+0000 to U+10FFFF, surrogates
left out, and compares the start and part checks with Unicode Standard
Annex #31's general-category definition of ID_Start and ID_Continue,
written out in the test. The test also checks the set sizes against the
totals in Unicode 16.0's DerivedCoreProperties (141,269 and 144,541).
- The Other_ID_Continue test covers every code point of the property,
U+136A to U+1370 and the zero width non-joiner and joiner included.
- The zero width non-joiner and joiner are part of the Other_ID_Continue
list in chars.rs instead of a separate case.
is_id_start now accepts the Other_ID_Start characters (U+1885, U+1886,
U+2118, U+212E, U+309B, U+309C), and is_id_part the Other_ID_Continue
characters (U+00B7, U+0387, U+1369 to U+1371, U+19DA, U+30FB, U+FF65),
as Unicode's ID_Start and ID_Continue properties and the ECMAScript
Names and Keywords clause define them. Letters, marks, digits and
connectors that are Pattern_Syntax are refused, which replaces the
U+2E2F special case. Escaped identifier characters go through the same
check. A supplementary letter right after a number is now the
"identifier starts immediately after numeric literal" error.
Letter categories still come from Unicode 16.0, so characters assigned
in later versions are not identifier characters yet.
Docs: docs/mcp.md, docs/target-app-parity.md.
A document a script opens now counts the art in its graph designs and in
the original of the pattern being edited toward the growth allowance.
`Document::art_roots` and `art_roots_mut` list every tree of a document's
art; `any_node`, `edit_nodes_where` and the script's object count use them.
`script.run` checks the depth of `args` without recursion before it copies
or writes them out, so `args` nested 10,000 levels deep is refused with the
place it went past 64 levels instead of overflowing the stack.
New tests: graph-design art and the growth allowance, `args` nested 10,000
levels deep from a script (a RangeError) and from a caller, `run --cmd
script.run` on the command line with a report and with a thrown error, and
a property test that sends arbitrary source through `script.run`.
File › Scripts › Other Script… picks a .js or .jsx file, shows a warning
that can be turned off in Preferences › General, and runs the script
against the open documents through the `vc` object. The new
`script.run` and `script.stop` commands run and stop a script over MCP.
- A run is one transaction. Each document it changed gets one undo step
named Run Script. An uncaught error, a limit or a stop puts every
document, the paint, the clipboard, menu state and preferences back.
- A command that fails inside a run, or whose result is too large to
reach the script, is undone and throws an error the script can catch.
- Files a command wrote stay on disk and the report names them, also
when the run is stopped from the quit question.
- While a script runs, other commands that change anything fail with a
busy error; MCP reports it as JSON-RPC error -32003.
- In the app the run advances one slice per frame with a Stop button in
the status bar. A run that adds a great many objects asks whether to
continue; Stop and Escape end it.
- Commands that change state outside the documents, such as prefs.*,
plugin.* and file.place.queue, are refused to scripts.
Docs: docs/mcp.md, docs/gaps.md, docs/roadmap.md,
docs/target-app-parity.md.
ECMA-357 sends a single attribute given to [[Insert]] through [[Replace]], which makes a text node. A list holding an attribute went into the children as the attribute itself, changed its parent and stayed on its old owner. Each attribute now goes in as a new text node with its value, and it stays on its owner. A list assigned such a value holds the new text nodes, and an attribute does not count against the depth limit.
An embedded expression used as a tag or attribute name must now be one XML
name, and one used as a run of attributes must hold only name="value"
attributes separated by white space. Anything else throws SyntaxError, so a
script string cannot add an attribute, close the tag or add a child.
{name}={value} in a tag now reads as a computed attribute name, as in the
example in ECMA-357 section 11.1.4.
Replacing a child with a list, inserting a list, and assigning or
replacing by name now check the depth and take all fuel and heap before
the first change. A limit no longer leaves the old child removed, part
of a list inserted or one of several matches gone.
appendChild and assignment past the end of a list remove their empty
placeholder when the assignment stops. A list that takes an earlier
sibling at an index keeps that node in its slot.
The XML parser now throws SyntaxError when markup binds the xml or xmlns prefix or either fixed URI against the Namespaces in XML rules. addNamespace, setName, setLocalName and setNamespace throw TypeError for the same bindings and leave the node unchanged.
A new element or attribute cannot be in the xmlns namespace, and an attribute in no namespace cannot be named xmlns. The xmlns URI cannot be the default XML namespace. These assignments throw TypeError.
BFlat