Each result row now starts with a 14-point icon for its kind: a tool's
own icon, or one for a panel, an effect, a filter plug-in or a command.
After the label, in 11-point dim text, the row shows where the result
lives: the menu path of the menu bar item that runs it, with that
item's label when it differs from the result's (File › Exit for Quit
VectorCraft), or "No menu item". A panel's row shows "Window".
A row with a home shows its label without the menu path in front of
it. A path that keeps two results' names apart stays in the label,
unless the row's home shows the same path; a tool's row drops the
"Tools" in front of its name.
A tool's row names the toolbar it is on, read from the current layout
each frame: "Toolbar" for its button on the Tools panel, or the name of
a toolbar made with New Toolbar, followed by ", in the <tool> group"
when the tool is hidden in the group of a slot whose button shows
another tool, and "All Tools" when no toolbar holds it. A toolbar shown
now comes first (the Tools panel, then the toolbars made with New
Toolbar), then a hidden Tools panel, then hidden toolbars made with New
Toolbar. Toolbars count as hidden in Presentation Mode and while Tab
hides the panels.
The home is cut with "…" first. A label too long for the row is cut
before the id it shows after its name, and the id stays whole unless it
alone is wider than the row. A cut row shows its full text on hover,
and screen readers read the kind, label, home and shortcut, as does the
search field's description. The row height is unchanged.
Window › Learn now also gives the Learn command (window.learn) its
home; before, only the Learn panel's result had it. A search reads that
menu path like any other result's, and among results that tie on
everything else the command ranks as a command of the menu bar.
New catalog rows: "No menu item", "Toolbar" and "{toolbar}, in the
{tool} group" in every catalog, "Tool" and "Command" where a catalog
lacked them, and "Panel" in Gujarati.
Cut Path at Selected Anchor Points cleared the selection and then added
each cut path in turn, and each add searched the paths already added, so
selecting the cut ends took time that grows with the square of the number
of cut paths. The command now selects them with one Selection::set call,
which skips repeats through a hash set and keeps the order in which each
path first appears, and then adds each cut end's anchor. The selection is
the same in every field; a new test compares it with the one-by-one build
on open, closed and multi-subpath cuts, long lists and an empty list.
The gain shows on large documents. With the 8 middle anchors of each of
5,000 open paths of 10 anchors selected, building the selection of 40,000
cut ends takes 9.7 ms instead of 232 ms of CPU time, and with 2,000 paths
3.2 ms instead of 39 ms (medians of 7 runs of the new
cut_path_select_bench example, both ways in one process).
The font menu's Recently Added chip, on its own row under Font Technology,
lists only the installed families with a font file created in the last 30
days, the newest at the top. It combines with the search, script, kind,
Variable, star and Document filters, lists the recently used families in
the same order without the Recent Fonts section, leaves Show Similar Fonts
to order only these families, steers the closed field's wheel, and is
shared by every font menu for the session.
The font scan keeps each file's creation time, and
FontDb::recently_added(now) dates a family by its newest file at or
before `now`, the 30th day included. Files without a creation time or
dated in the future do not count, and families added at the same instant
are in name order. The open menu lists a family no longer once its 30
days end.
- A gradient's freeform points count only when its kind is Freeform, in
the Overprint Black check and in the plate separator. A gradient of
another kind is checked by its stops.
- Characters inside opacity mask art no longer draw with Darken on
separations, as the mask art's fills and strokes already do not.
- With Overprint Black on, a symbol instance whose own fill or stroke
changes or fill stain repaint its art, or whose symbol holds such an
instance, prints as its placed art and is checked with the paints it
prints with. Placement stays within the symbol object limit and the
drawn depth limit, and skips hidden objects and template layers.
The line under the Preferences fields now shows a sentence for each of
the 32 General settings, Enable Contextual Task Bar included, when the
pointer is over the setting's row or its control has the keyboard
focus. Screen readers get the same sentence as the focused control's
description. Each sentence states what the app does with the setting,
and every catalog has a row for it.
A test checks that every General setting has exactly one sentence, and
two more check the line on hover and on keyboard focus in General. The
test of a row without a sentence now uses Type > Size/Leading.
The Print dialog's General section (and the print preset editor) gets a
link button after Scale W and H. While it is on, typing either percentage
sets the other, and turning it on sets H to W. It is on for new settings,
dimmed with the fields unless Scaling is Custom or a tiling choice,
toggled with a click, Space or Enter, and screen readers hear its name
and on or off state. W and H now take 1 to 1000 %.
The link is saved as scale.linked with the other print settings, in the
document and in print presets. A scale saved without it reads as unlinked,
so earlier settings print as they did. print.setup, print.preview,
file.print and print.presets.save apply the same rules: one percentage
sets the other while linked, a different width and height without a
linked key turn the link off, and with linked: true (or linked: null over
a linked scale) they are an error.
The Trim at Crossings Tool joins the Scissors group in both shipped
toolbars, after the Knife, and stays in Object › Plug-ins › Path
Precision Tools. The All Tools drawer lists it once, in the Scissors
group, and Edit › Keyboard Shortcuts › Tools lists it once. It has no
default shortcut. A toolbar the user already edited keeps its saved
layout; Reset Toolbar adds the tool.
The Knife's cursor is now drawn as a knife, its blade's point on the
hotspot, instead of borrowing the crosshair. The Knife tool and the Trim
at Crossings Tool both show it. Use Precise Cursors still shows the
crosshair.
Suggested by erolka and leanma.
With #8144, an edge pixel between black and white is read as a blend of
black and white when paths of up to 5 steps reach past a gray between
them both ways. On edges blurred by 0.6 pixel, the outer pixels of a gray
band 3 or 4 pixels wide along black also met that rule: their first step
outward is white, and the path toward black crosses the band's gray. A
3 px band at that blur kept 16 of its 48 samples gray, against 46 before
#8144.
When the first step of one path already stands for its color (the edge
on that side is sharp), the other path now stops at a pixel of the gray
it comes to before getting past it. Bands 2 to 4 pixels wide blurred by
0.6 pixel keep 306 of their 432 samples gray (207 with #8144, 324 before
it). Edges blurred by 1 to 3 pixels trace as with #8144, except that a
light gray (230) blurred by 1.5 pixels leaves at most 4 slivers of up to
3 pixels beside the disc.
The band test now also runs at blurs of 0.6, 1 and 3 pixels, the spoke
test at 2 pixels, and the stroke test's ranges are the measured ones.
The docs state the distance rule as the code computes it and limit each
measured claim to the blur it was measured at.
links.unembed now reads `ids` of one image as `id`, and `id` with
`folder` as `ids` of that image, as the other commands that name both
keys do. `id` with `ids`, and `path` with `folder`, are refused with the
shared "give `a` or `b`, not both" error, in a replayed step too, and the
catalog rows for the old combined message are removed.
A symbol dragged from the Symbols panel carries the document it came from. Dropped on the canvas after another document became active, it no longer places a same-named symbol of the active document: symbol.placeFromDocument adds the dragged symbol, with the symbols and resources its art uses, and places it in one undo step. A symbol with the same name, art and Symbol Options is reused; one with the same name but other art or options is added under a free name. The pointer chip shows the dragged symbol, and a symbol whose document was closed places nothing.
The Actions panel menu has Replace Actions… after Load Actions…. It
opens an action set file and replaces every set in the panel, the
built-in Default Actions set included, with the file's set, which keeps
its name and becomes current and selected. It reads .vcactions and .aia
files as Load Actions… does, with the same limits and reports. The item
asks no question first and is off while an action records or plays.
- ui.actionSet.replace {path? | data?} runs it and returns
{changed, set, name, actions} with Load's reports. Omitted params
count as {}; another type or key, or a path or data that is not a
string, is an error.
- A canceled pick, or a file that can't be read or is refused (an empty
one too), changes nothing. Replace records no undo step.
- Replace clears what named the old sets as Reset Actions does, and the
two share that code.
Docs: docs/mcp.md, docs/ui-parity.md, docs/target-app-parity.md.
- The warning now says a line does not change the result's shape,
since Unite, Intersect, Exclude and Minus Back still give the result
the frontmost object's paint, a line's included. The rows in every
complete-message catalog follow.
- When a closed path without area leaves the result empty beside a
line, the error no longer names the line: the check that decides
whether the line emptied the result now keeps closed paths among the
other shapes and leaves out only open paths that enclose no area.
- node_path's doc comment is back on node_path.
- docs/mcp.md adds a line in front in Minus Back to the cases whose
error names the line.
- The test adds a line in a compound path, a group of a line and a
square selected alone, a line in front in Minus Back, and a flat
closed path beside a line in Intersect.
The Variables panel built its rows on every frame while it was open: the
list's order, each variable's bound objects and object name, and each data
set's drift check, which reads the text of every bound story and the data of
every bound graph. The rows are now kept and built again only when the
document version, the list's order, Identify Objects By, the interface
language or the document's new art on a locked artboard changes. The
selection and the highlighted row are still read on every frame, and the
rows are the same as before.
A symbol dragged from the Symbols panel, in thumbnail view or a list
view, and released on the Delete Symbol button is deleted as a click on
the button deletes it: the dragged symbol, not the current one, goes
through the same questions, the Alt rule for an unused symbol and one
undo step. A symbol that Select All Unused picked deletes every picked
symbol still unused; a symbol outside the pick is deleted on its own.
The button is outlined while a symbol of the active document is held
over it, and a library symbol, art, a name the document no longer has or
a symbol dragged from another document is ignored.
A Document chip beside the star filter lists only the font families that
type in the current document is set in, as the quick filter on the font
browser overview help page describes:
https://helpx.adobe.com/illustrator/desktop/design-with-text/fonts-and-scripts/font-options-overview.html
The filter combines with search, script, kind, Variable, favorites, Recent
Fonts and Show Similar Fonts, steers the closed field's wheel, follows
edits and undo while the menu is open, and is shared by every font menu
for the session. Type in hidden, locked and masked objects, symbols,
patterns and graph designs counts; a composite font lists under its own
name; a family the document names but the computer lacks is not listed.
A document without available fonts lists nothing with its own message,
and with no document open the chip is unavailable.