With the Rectangle and Ellipse tools, Cmd lends the selection tool chosen
last, and Copy already took the anchors Direct Selection picked. The
Curvature tool, which Cmd lends Direct Selection, copied the whole path
before this PR, as the Pen did.
The remembered selection is now tied to the document it was made in, by its
uid, instead of being cleared on every tool reset: another view of the same
document, or closing an inactive tab, kept the anchors picked but made Copy
take the whole path.
A lent gesture that leaves the selection as it found it (a Cmd+Shift marquee
over nothing) is no longer recorded as a pick, so the Pen's last anchor stays
its own and Copy takes the whole path.
Also records #6123 in target-app-parity.md.
With the Pen or Curvature tool, Copy and Cut ignore the anchor selection,
so that the last anchor the Pen leaves selected doesn't make Copy take just
that anchor (#2122). Anchors picked with the Direct Selection that Cmd/Ctrl
lends those tools were ignored too, and the whole path was copied.
The session now remembers the selection the lent tool leaves when it gives
the tool back. While that is still the selection, Copy and Cut take the
picked anchors and segments, as with Direct Selection chosen.
swatch.new stored a gradient or pattern as it was given. A gradient
swatch made from a gradient swatch by name, from a fill linked to one,
or from a gradient that names one (the Gradient panel's add to
swatches) kept the link to that swatch, so copying art that uses the
new swatch brought the other swatch along too. A pattern swatch made
from a current fill picked up from art with transformed tiles kept
that transform, and art the swatch was applied to took it in place of
its own.
The new swatch now drops the gradient's link and stores the pattern
untransformed. A gradient swatch keeps its aspect as before.
A gradient placed with the Gradient tool stayed where it was when the
object's Transform or Free Distort effect moved, turned or scaled the
outline, so the shape slid across its own gradient.
The Transform effect now maps placed gradients by its own transform,
and each of its copies takes them as many times as it takes the
transform. Under Free Distort, each path's placed gradients move and
scale from the path's bounds before the effect to its bounds after it.
This change does not alter gradients fitted to the object.
The canvas, Expand Appearance and export, Pathfinder and compound
shapes, groups, a fill's or stroke's own effects, and Object › Expand
of a gradient fill apply the same rule. In a group, the own fills and
strokes of the group, of the groups inside it and of a symbol's art
follow it too, and images and symbol instances that a group's
Transform effect moves take the placed gradients of their own fills
and strokes along. A group whose path keeps its shape because the
effect would pass the geometry budget keeps its own gradients in
place.
This changes how existing documents draw: a gradient placed on a path,
or on an image's or symbol instance's own fill, inside a group with a
Transform effect now moves with it. Before, only the gradients of type
moved (#2214).
How gradients follow each effect is VectorCraft's own rule. The
Distort & Transform help page describes what the effects do to the
object:
https://helpx.adobe.com/illustrator/desktop/manage-objects/reshape-transform-objects/distort-and-transform-effects-in-illustrator.html
A top-object envelope splits its outline into four sides at four corners
and maps the content onto the Coons patch of those sides. The sides
shared out the content by length, and the corners were the anchors or
curve points nearest the bounding box corners.
Each piece of a side between anchors and corners now takes a share of the
content's width or height in proportion to the length of its control
polygon, spread along the piece by its curve parameter. A straight
segment spreads it evenly by length. A rounded rectangle stays close to
the identity, and the content follows the curves of a side whose segments
differ in size.
Each corner is now the nearest anchor to its bounding box corner among
the sharp anchors that point out of the outline and lie within 47.5% of
the box's width and height from that corner. A handle shorter than
0.01 pt, or tangent unit vectors that differ by 0.01 or more in x or y,
makes an anchor sharp, and the first one along the outline wins a tie.
Without such an anchor, the corner is the outline's nearest point to the
box corner, moved onto the end anchor of its segment within 0.5% of the
segment's parameter. Envelopes opened from .ai files keep the corners the
file saves.
These are VectorCraft's own rules. Existing top-object envelopes redraw by
them. Gradient meshes made from a path keep their sides measured by length.
- crates/doc/src/live/mesh.rs: Coons::from_top_object and the corner
search, used for top-object envelopes.
- EnvelopeKind::TopObject gains an optional `corners` field (anchor
indices); the .ai importer fills it from the mesh's corners.
- Params text of object.envelope.makeWithTopObject, docs/mcp.md
(Envelopes) and a progress line in docs/target-app-parity.md.
File › Open and File › Place read HEIC and HEIF still images (.heic,
.heif) through heic-rs 0.1.4, the pure-Rust decoder photocraft-heif
uses, and store the pixels as PNG. Single pictures and grids of tiles,
8 to 10 bits, with or without an alpha image, are read with the
container's rotation, mirror and crop applied. A grid without a color
box of its own takes its tiles'. When neither the image nor its tiles
have an nclx box, the HEVC stream's video signal type gives the
samples' matrix and range. An RGB ICC profile, or Display P3 with the
sRGB curve named by an nclx box or, without a color box, by the
stream, is converted to sRGB. The EXIF resolution tags size the image;
without them it is 72 ppi. When the container's rotations turn the
image an odd number of quarter turns, the resolution's axes swap with
the pixels'.
Image sequences, images that aren't HEVC-coded, grids of cropped tiles
and images past the pixel allowance are refused with a message before
the pixels are decoded. The allowance counts each coded picture at the
size its sequence parameter sets give it.
The decoder is in the engine's `heif` feature, which is on by default
and listed by the desktop, CLI and web apps. A build without it still
recognizes the files and refuses them with a message.
With Snap to Grid on, a move of objects on one perspective plane at
different depths applied the snap correction only to the objects at the
first object's depth, and every other object moved by the pointer's
offset read at its own depth. Those objects left the grid and lost their
spacing.
Every object on the first object's plane now moves by that object's
plane offset plus the correction, so the edge of the joint bounds nearer
a gridline lands on it and the objects keep their spacing. A selection
at one depth snaps as before, and objects on other planes keep their own
offset.
The command catalog said "* ", "# ", "> " and "+ " all start a list
with the filled dot. It now names the filled dot, hollow circle,
filled square and dash. The text.startList test checks each of the
four triggers and the marker the layout draws.
Typed list detection gave every bulleted trigger the filled dot. Now
`*` and a space start a list with the filled dot (•), `+` with the
hollow circle (◦), `#` with the filled square (▪) and `>` with the dash
(–), each one of the existing Bullets presets. `1.`, `1)`, `A.` and `A)`
start the same numbered lists as before.
Only the list a typed trigger starts changes. Lists already in a
document keep their bullets, pasted triggers start no list, and Undo
and Redo of a typed list work as before.
Docs: docs/mcp.md (typed list paragraph), docs/target-app-parity.md.
- typed_lists_off_leaves_typed_markers_as_text turns the preference back
on for each marker and checks that typing it in a new paragraph starts
a list with a Bullets and Numbering undo step.
- start_lists_from_typed_markers_is_a_saved_type_preference: the Type
page shows the checkbox, checked by default; unchecking it turns the
preference off in the session and in the saved preferences, and every
bundled language translates its label.
Preferences > Type gets Start Lists From Typed Markers (`typedLists`, on
by default). With it off, a list marker and a space typed with the Type
tool at the start of a paragraph (`1. `, `1) `, `A. `, `A) `, `* `,
`# `, `> `, `+ `) stay as text and start no list. `text.startList`,
`text.setFormat {list}` and the Bullets and Numbered List buttons work
as before.
The preference reaches the Type tool through `ToolContext::typed_lists`.
The label has a row in every catalog.
A recorded save in the template format writes a copy and leaves the
document's file as it was, so it no longer clears the warning or the
refusals. A recorded Save or Save As with its own path gives a never-saved,
converted or restored document its file before Save and Close, so the
batch runs and warns that every data set saves over that one file.
With a destination folder and Override Save on, a recorded Save or Save As
step writes each data set to its own file in that folder and makes that
file the document's own, so Save and Close then saves each data set to its
own file. The batch no longer warns that every data set saves over one
file in that case, and no longer refuses a document that was never saved,
converted or restored, since the recorded step gives it a file first.
A recorded PDF, EPS, DXF, Save for Web or Save for Office Documents step
that gives a `path` writes the same file for every data set, because the
batch does not point these steps into the destination folder. The one-file
rule now counts them, so the dialog and `action.batch` warn.
Save and Close over the data sets of a document converted from an older
version or restored by Data Recovery is refused with "save the document
with Save As before Save and Close" before a data set is selected. Saving
such a document does not write its file, so the batch reported success
without saving anything. The message has a row in each of the 26 catalogs.
Batch… with a Data Sets source offers None, Save and Close and Folder again.
Save and Close saves the open document over its own file after each data
set. When every data set saves over the same file, the dialog shows a
warning and `action.batch` returns `warning`: with Save and Close, or with
a recorded step that writes a file and that the batch does not point into
the destination folder. A Save step without a path counts when it writes
the document's own file; Save As, Save a Copy, Save as Template and Export
steps count when they give a path; Export for Screens counts when its
folder, given or from its preset, names a folder. Save and Close over the
data sets of a document that was never saved is refused with "the
document has never been saved" before a data set is selected.
Data sets share one open document, so Save and Close saved every data set
over the same file and only the last one survived. action.batch now
returns an error for source datasets with destination saveAndClose before
it selects a data set or runs a step, and the Batch dialog offers None and
Folder for a Data Sets source, moving a Save and Close choice to Folder.
The Generic CMYK solver clamps each ink to 0..1 after a step. When an
ink sits at 0 or 1 and the step pushes it further out, the clamp
removes most of the step, and the solve can stop after a step under
1e-6. Where it stopped depended on the input's last float bits. For hex
ed1e79, magenta ranged from 93.2% to 93.9% and yellow from 15.3% to
16.3% over 4,001 f32 values of its red, with 230 jumps over 0.001
between neighboring values.
An ink at 0 or 1 whose descent direction points out of the range now
stays where it is, and the step moves the other inks. The solve stops
when every ink is held. Two new tests step a channel one f32 at a time
and check that every ink stays within 0.001: the red of ed1e79 (cyan
held at 0) and the blue of sRGB (0, 0, 0.25) (cyan and magenta held at
1).
The solver still minimizes plain Lab distance to the gamut-mapped
target. The CMYK values of many RGB colors change; hex 00ff00 now
separates to C=61 M=0 Y=100 K=0 (cyan 0.6235 before, 0.6064 now), and
the swatch test that pins its name is updated.
A grants.json entry this version can't use (a permission it doesn't know,
an invalid id) is now skipped on its own instead of dropping every grant in
the file, and recording or removing a grant writes it back unchanged,
except an entry for that plug-in. A grants.json that is too large, can't be
read or is not a JSON list is left as it is, and a rewrite that would pass
the 1 MiB read limit is written compactly, or not at all.
A plug-in whose manifest gives "api": 2 and lists the new `progress`
permission may import three host functions from module `env`:
vc_progress(done, total), vc_cancelled() -> i32 and
vc_log(level, ptr, len) -> i32. Installing checks every import and
refuses, by name, one the host doesn't offer, one with another type and
one the manifest doesn't allow.
- Progress is clamped and passed on once per tenth of a percent (past
2,000 reports, once per 1,000 changes). A heavy filter's progress
window and the export's progress window show it as a percentage bar,
and their Cancel makes vc_cancelled return 1. A live effect's progress
is not shown.
- A run cancelled before it returns ends as cancelled, and one that
returns after its time budget ran out ends at that budget, so what a
plug-in returns after it sees vc_cancelled changes nothing. This also
applies to a plug-in of API level 1 that finishes after a Cancel or
past its time budget.
- Log text must lie in the module's memory and be UTF-8. Lines go to the
app's log as "<id>: <text>" with hidden characters escaped, at most
1,024 characters a line, 200 lines and 32 KiB a run, and the host reads
at most 1 MiB of log text a run.
- plugin.list and plugin.info give the manifest's `api`; the install
prompt names the new permission in plain words.
Docs: docs/plugins.md, docs/mcp.md, docs/target-app-parity.md.
The Links panel's Relink... button and menu item open a Relink dialog
(ui.relinkDialog) with a Replace menu. Selected Instances relinks the
selected images and placed documents, as Relink did before. All
Instances also relinks every other object in the layers linked to the
same file. Missing Links from This Folder relinks the selection to the
chosen file, then every other missing link to the file of its name in
that file's folder, and the status bar names the files not there. Each
Link Separately asks for a file for each selected link in turn, one OK
each, and relinks them all at the last one: the dialog has one row per
linked file, and each selected embedded image gets a row of its own.
Every choice is one undo step.
links.relink takes scope: selected (default), all, missingInFolder
(with path) or each (with paths: [{ids, path}] in place of ids, path
and folder). A scope or paths that doesn't fit is an error and relinks
nothing. With copy, every file is read and checked before any is
copied, copies made before a failed copy are removed, and
missingInFolder looks for missing images only.
Docs: params text, docs/mcp.md, docs/control-protocol.md,
docs/target-app-parity.md. Catalog rows for the new labels and messages
in every catalog.
A paint linked to the built-in Registration swatch is no longer relinked
to a new global swatch of the same color, so it keeps printing on every
plate. The same rule applies to New Color Group from artwork with
global swatches.
Add Used Colors, New Color Group from artwork and Select All Unused
looked up each linked paint's swatch by searching every swatch. They now
build one map of swatch names first, with the built-in Registration
swatch, and the first swatch of each name as before.
New tests and test cases: New Color Group from artwork with repeated,
near-equal and -0.0 colors, a Registration link and names that need
numbering, and New Swatch and Edit Color Group with near-equal and
-0.0 colors; each checks the names, their order and one undo step.
New Swatch with several colors, New Color Group and Edit Color Group's
extra colors searched every swatch and group for each candidate name
of each new swatch. They now build the set of taken names once
(FreeSwatchNames, with take_new for New Swatch's default names and
insert for the group name and the group's own swatches) and keep it up
to date as they add swatches. The names they give are unchanged.
swatch.unused grouped the gradients in use by their stop colors and
compared each gradient swatch with every gradient in its group, so
gradients that share stop colors but differ in offsets, midpoints,
opacity, kind, method, dither or links still took quadratic time. Each
gradient now has a key that is equal exactly when the gradients are
equal: kind, method, dither, and each stop's offset, color, opacity,
midpoint, link, tint and process plates. The gradients in use go into
one hash set, and each gradient swatch is looked up in it.
swatch.addUsedColors and swatch.unused searched lists inside loops over
colors and swatches, checking each color against every color or swatch
before it. They now keep the same ordered lists and use hash sets and
maps for membership and lookup. A color's key is its model and the bits
of its components with -0.0 read as 0.0, so the key agrees with `==`; a
color with a NaN component matches nothing, as before.
Add Used Colors names its new swatches through
Document::free_swatch_names, which collects the taken swatch and color
group names once and gives the same names free_swatch_name gives when the
swatches are added one at a time. The added swatches, their names, order
and links, the undo step, and the swatches Select All Unused lists are
unchanged.
Sven Lafebre