Coordinates outside -32,768 to 32,767 plotter units (about 82 cm from the origin) are written as they are, with a warning that older devices may not read them. HP-GL/2 plots are not checked against this range.
An entry `<area>/keeps-<left area>` kept the copies in the left area
whenever the lock check on `<area>` failed, so an entry in a folder of
another account, or in one whose lock file can't be opened, kept a
crashed app's copies from being offered. Such an entry now keeps
nothing: only an area that this session holds, or that a running app of
this account has locked, keeps the copies it names.
With Revolve (Classic) on a group, a member whose gradient has
transparent stops drew its whole surface in the members' order, so it
could cover a member in front of it or hide behind one it is in front
of. Its faces now take their places in the one back-to-front order of
every member's faces, in runs as a member with transparency of its own
does, and each run carries the member's opacity mask.
Effect > Refresh Deferred Effects looked up the objects asked for, the
stages reached, the objects drawn whole and the inputs that ran with
Vec::contains, and counted each target stage by scanning every deferred
record. Asking whether a stage stays deferred and replacing a stage's
records when it runs also scanned every record.
Deferrals::refresh now keeps the objects asked for and the objects drawn
whole in sets, and Refresh's ids, retried, visited and touched and
Pass.ran and seen are sets. The deferred records are kept in a BTreeMap
by the order they were made in, with an index by stage and input key, so
holds, State::remove, settle and the refresh's reconciliation and count
look at the records of the stages concerned only. The targets, counts,
records kept and their order, marks and revision are unchanged.
Docs: docs/target-app-parity.md.
After Replace Spine the keys are not pinned to spine anchors, so the
steps spread them evenly along the spine by arc length and put a moved
key straight back where it was. Once a key is moved off its place, the
spine is laid out pinned at the anchors where the keys were spread, and
the moved key takes its point of the spine along, as on a pinned spine.
When a running app has to leave its recovery area (its lock file was
removed and another app locked the area), its copies stay in the old area
until it writes them again in its new area. Only that app knew this, so
once the other app let the old area go, any app could offer, restore or
discard those copies while their app still ran.
The app now writes an entry `<new area>/keeps-<old area>` in its own area
while copies of its documents are left in the old one, and removes it
when none are. Another app that finds an area unlocked checks for such an
entry, and treats the area as a running app's while the area that names
it is held. After a crash the new area is no longer held, so the copies
are offered as before. The heartbeat writes the entry again if it was
removed.
Effect › 3D and Materials › 3D (Classic) › Rotate (Classic)… turns every
fill and stroke as one flat plane, as Rotate does, and shades it with the
classic No Shading or Diffuse surface.
- `effect.apply` with `threeD.classicRotate`: the Position rotation and
Perspective, `surface` (`none` or `diffuse`), the classic lights,
Ambient Light, Blend Steps and Shading Color. It has no highlight, no
Draw Hidden Faces and no shadow.
- The dialog shows Position on the Rotation tab and the surface and
lights on the Lighting tab, with no Object tab.
- Groups and layers turn about one shared center, and the effect also
goes on a fill or stroke, as Rotate's does.
- `effect.lightingPreset` refuses it, as it refuses the other classic
3D effects.
- Unknown parameters, numbers out of range, bad flags, a surface other
than No Shading or Diffuse and bad shading colors are refused with an
error.
The 3D and Materials rows of target-app-parity.md's area tables now name
Rotate (Classic) and Map Art as the 3D (Classic) work that remains, as
effects-parity.md and gaps.md do.
A save or export that writes a file per artboard, linked images or image
maps names them after the file picked in the save panel, which asked only
about that name. A file already there under one of the other names was
replaced without a question.
Save As, Save a Copy, Save as Template, Save and Export now check those
files before writing anything. When any is there, nothing is written and
a replaceFiles question names it (and lists all of them when there are
several). OK runs the save or export again on the document that asked and
replaces the named files; a file it would now write that the question did
not name is asked about again. Cancel writes nothing. A background save
or export checks from its worker and asks once it ends, after a dialog
open then. Files the document's last Save or Save As wrote are replaced
without asking.
Services::exists is now an Arc<dyn Fn(&str) -> bool + Send + Sync>.
A {Custom: {name, path}} head is refused when its path fills no area under the
non-zero rule: a single anchor, points on one line, or contours that cancel out.
A bow tie and a thin bar are taken. The params text and docs/mcp.md state the rule.
Window › Swatch Libraries › Gradients gains Holographic, after Organic
Fades: seven foils (opaque linear gradients of six narrow pastel and
pearl bands with off-center midpoints) and seven glows (radial
gradients from a bright center out to a clear edge), all mixed with the
Perceptual method. They also list in the Swatches panel's library menu,
swatch.library.list/get/add and the Gradient panel's Presets.
The names, colors and stops are VectorCraft's own. A saved preset that
already uses one of the new names is renamed with the first free number
when the preferences load.
Docs: docs/target-app-parity.md Swatches line, ROADMAP.
effect.list's catalog lists the plug-ins installed in the process-wide
registry, which the plug-in tests change while the id and ids comparisons
run in the same test binary. Both comparisons, id against ids of one and
ids against the selection, now take the plug-in effects (plugin.<id>) out
of effect.list's catalog before comparing. The built-in catalog, applied,
activeItem, errors and the document are still compared.
Korean text broke after every Hangul syllable. A paragraph now has
Korean Line Break Anywhere, set from the Paragraph panel menu (with the
East Asian options), from the East Asian Composition Settings section of
Paragraph Style Options, and with `text.setFormat {koreanLineBreakAnywhere}`.
- Off, a word that contains Hangul (the characters between spaces) breaks
only at its spaces and after East Asian punctuation, or where the word
is wider than the line. Both composers follow it, and the word takes no
hyphen. On, a line may break between any two syllables, as before.
- New type has it off. Paragraphs and text objects saved before the
option read as on, so their lines do not move; the value is saved only
when it is off.
- Paragraph styles carry it, Reset Panel turns it off, and the .ai writer
reports it as lost for Korean paragraphs.
The help page: https://helpx.adobe.com/illustrator/desktop/design-with-text/fonts-and-scripts/set-line-breaks-korean-text.html
The command is described in docs/mcp.md, and docs/target-app-parity.md
lists the option.
Effect › 3D and Materials › 3D (Classic) › Revolve (Classic)… sweeps the
profile round a vertical axis, as Revolve does, and draws every face with
the Wireframe, No Shading, Diffuse and Plastic surfaces of Extrude & Bevel
(Classic).
- `effect.apply` with `threeD.classicRevolve`: Angle (0 to 360), Cap,
Offset (0 to 1000 pt) from the left or right edge of the profile's
bounds, the Position rotation and Perspective, and the classic lights,
Ambient Light, highlight, Blend Steps and Shading Color.
- Groups and layers revolve about one shared axis, and the effect also
goes on a fill or stroke, as Revolve's does.
- `effect.lightingPreset` refuses it, as it refuses Extrude & Bevel
(Classic).
- Revolve faces carry their view-space normal, and
`three_d::revolve_facets` hands them to the classic surface code.
- Unknown parameters, numbers out of range and bad flags, edges,
surfaces and colors are refused with an error.
Paragraph Style Options and New Paragraph Style gain a Tabs section. It
lists the style's stops and edits the selected stop's Alignment, position
(X:, or Y: for vertical type), Leader and Align On character. Add puts a
left stop 36 pt past the furthest one, Delete Tab removes the selected
stop, and Clear All Tabs leaves the style with no stops. OK sorts the
stops by position and keeps the stop edited last when two share one
position. Reset Panel removes the style's tabs.
paraStyle.new, paraStyle.setAttrs and paraStyle.edit check changed tabs
stop by stop: at most 256 stops, and each changed stop's position from 0
to 100000 pt and leader of at most 8 characters. Stops the style already
has are kept as they are. Changed tabs are sorted by position, keeping
the first of stops at one position. text.tabs.set rejects a leader longer
than 8 characters, an Align On value of more than one character and more
than 256 stops. Loading paragraph styles skips a style whose indents,
spacing, hyphenation, justification or tabs are out of range.
Docs: docs/mcp.md, docs/target-app-parity.md.
flat_charged and the property-key path now root the rope itself, so a string held only by
native code (a getter's result for ++o.x, a valueOf result, a toString key) still counts
what it holds when the reservation collects. The per-call roots for these cases are removed.
BFlat