- The link watch and links.updateChanged look at a DCS file's plate files
of their own, so a changed plate file is read again.
- links.update and links.relink apply the file's clipping path to the
images in symbols, graph designs, patterns and masks too. When the new
file has no clipping path, a clip group holding the old file's clipping
path loses that path and stays as a plain group of the image, keeping
its id, name, visibility and transparency. The image keeps that path with its plates to tell it from a
clipping mask made in the document; a clipping path given another fill
rule in the document stays. An even-odd clipping path in the file is
kept as the same area under the nonzero rule.
- links.update and links.relink return the swatch warnings file.place
gives, including two files that add one ink in two colors.
- links.relink with copy fails for a DCS file with plate files of its own.
- file.place answers the image id of a clipped DCS placement as image,
and checks page and crop for a DCS file as it does for an EPS file.
- Print separations and Separations Preview take a spot plate's color
from the document's swatch of its ink, and a reduced image's plates
keep their coverage.
- Show DCS Transparency Interactions counts a transparent DCS image and
characters filled or stroked with a transparent gradient.
- %%PlateFile names keep their spaces, and header bytes that are not
UTF-8 are read as Latin-1.
- A plate program that draws more than one image, art besides its image,
or its image through a clipping path is an error naming the plate
instead of printing the wrong ink.
- Nested clipping paths around the composite clip the image together.
- A kept image with more plates than are read, or more TIFF directories
than its composite and plates, is the CMYK image of its composite
only, not a set of plates cut short.
- swatch.unused counts a spot or process swatch as used only while an
image the art shows has a spot plate of its name.
File › Place with Link reads a DCS 1.0 or 2.0 file (an EPS file whose
header names one EPS program per printing plate) as one linked image of
its plates. Each spot plate adds a spot swatch in the CMYK values the
file gives, and the clipping path the file's composite is drawn through
clips the image. document.open, file.place without link or from bytes,
and links.embed refuse a DCS file and change nothing.
- The screen, composite print and exports show the plates mixed into
CMYK. Separations Preview and print separations show each plate on
its own ink; a spot plate prints as its CMYK values when spots print
as process.
- links.list answers the format DCS, and with dcsTransparency marks the
DCS images that are transparent or overlap transparent objects (the
Links panel menu's Show DCS Transparency Interactions).
- swatch.unused leaves out a spot swatch while a DCS image has a plate
of its ink.
- links.update and links.relink read the plates and the clipping path
again, and the link shows as modified when one of its plate files
changes or is gone.
- The plates go on the first plate's pixel grid, grown to hold every
plate where it prints; a plate of another size or position is
resampled onto it.
- A file may name 64 plates, a plate file may be 1 GB, and the plates
together may hold 512 MB of ink amounts. A file naming more plates is
an error.
Docs: docs/mcp.md, docs/target-app-parity.md, docs/file-format-parity.md.
With image mips on (the canvas, navigator and layer thumbnails), an image was colorized,
separated into the frame's ink plane and shown through Separations Preview's plates at its
full size, and only then shrunk to the mip drawn. The 141-megapixel image of #4155 made
1.6 GB of planes a frame, more than the image store holds, so every frame made them again.
The mip is now picked first and everything else is made from it, under the keys `kept_mip`
and `nearest_kept` already look up. A CMYK image's own inks are halved with its pixels
(`ink::key_inks`, `images::half_inks`), so it still paints them rather than inks separated
from its displayed colours. Colour bitmap glyphs follow the same order.
On that file the app's first frame went from 9.2 s to 1.6 s and the sharp frame after a pan
from 3.9 s to 8 ms (M3 Pro, one run each). Fine detail now shows its true average: 1-pixel
black and white lines show mid grey, where separating first showed them 44 levels darker.
Multiply squared a colour overprinting itself (stroke over same-colour fill showed a darker band). Darken keeps the stronger ink per plate/channel.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With Separations Preview on, the renderer copied every node of the
document in every frame and separated each of its colors again. With
Overprint Preview on, it copied each object with an overprinting fill
or stroke in every frame, with the groups and layers that hold it. The
copies were new Arcs, so the geometry, stroke outline and raster
caches missed for each of them in every frame. In a release build,
drawing a 2880x1800 frame of a 50,000-path document again with the
same view and Separations Preview took 795 to 908 ms.
The renderer now keeps the art it prepared and what it was made from,
and in the next frame it uses that art again for each layer, symbol
art and member that has not changed. Only the objects that changed are
prepared again, with the layers and groups that hold them. All of the
art is prepared again when Discard White Overprint changes and, with
Separations Preview, when the plates shown, the proof setup, the
swatches, the Spot Colors option or the color settings change or a
profile is registered (cms::profiles_generation). The renderer now
draws that frame again in 98 to 107 ms, with the same pixels.
Docs: docs/target-app-parity.md.
file.print {settings?, path?} lays the document out on paper and writes one PDF page per sheet:
copies (collated, reversed), artboards (all, a range, ignored), blank artboards skipped, paper
size and orientation (or turned per artboard), transverse, Print Layers (template layers never
print), placement on the imageable area, no scale / fit / custom / tiles of the paper or of the
imageable area with overlap and a tile range; printer's marks and bleed as PDF export draws
them; composite or separations (one grey plate per ink that prints, overprints honoured, spots
as process), emulsion down, negative; rendering intent and preserve numbers. print.preview lists
the pages, tiles, inks and warnings; print.setup saves the settings with the document
(Document.print_setup, one undo step).
PDF export and print share one page writer; the ink separation helpers move from the renderer to
vectorcraft_doc::inks and the range parser to vectorcraft_doc::range so print can use them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
File > Document Setup is a tabbed dialog over one engine command,
document.setup (no params: a query; any keys: one undo step;
document.setUnits stays as the units alias).
- General: units, bleed (four sides with a link toggle), Edit Artboards,
Show Images in Outline Mode (greyscale pixels under the frame),
Highlight Substituted Fonts/Glyphs (pink boxes on screen only).
- Transparency: grid size and colour presets or custom colours, Simulate
Colored Paper, the flattener preset (built-in or saved) and Discard
White Overprint (Overprint Preview keeps white overprints visible).
- Type: language with its quotes, Use Typographer's Quotes for the Type
tool and Smart Punctuation, superscript/subscript size and position and
small caps size (Character panel position/smallCaps; changing the
setup restyles the text in the same undo step), text export (SVG text
as text or outlines by default).
- The canvas draws a red bleed outline and the grid in the document's
colours and cell size as one textured quad, also in rotated views; a
white Background Contents exports raster formats opaque.
Model: Document.setup (DocSetup, defaulted, skipped when default) and
CharStyle position/small_caps; old files load unchanged.
tests_transparencygrid's helper now finds the grid by its texture (the
grid is one textured mesh instead of per-cell rectangles).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Colours gain a CIE Lab model (`Color::Lab {l,a,b}`, serde tag `lab`), handled through the
CMS (display, separation, conversions, gamut), tints (toward paper white), keep_model, harmonies,
recolouring, blends, Info and the Color panel. Swatch Options gets a Lab mode
(`swatch.edit {mode: "lab"}` / `{color: {l,a,b}}`), and colour params accept `{l,a,b}`.
Swatches panel → Spot Colors… (`ui.spotColors`, dialog `spotColors`) runs `swatch.spotOptions
{useLab}` (Document.spot_use_lab, default on): Lab spot colours show and separate from their Lab
values, or art linked to them takes their working-CMYK equivalents, as one undo step. PDF export
writes Lab spot inks as Separation spaces with a Lab alternate (tint function from paper white),
or a DeviceCMYK one with CMYK equivalents.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
[Registration] is a built-in swatch that prints 100% on every plate: Separations
Preview shows it on each process and spot plate and PDF export writes it as
/Separation /All. It can't be edited, moved, duplicated, merged or deleted;
swatch.list shows it after None and the Swatches panel applies it as a swatch.
Object > Create Trim Marks strokes the marks in Registration and marks every
artboard when nothing is selected ({style?, allArtboards?}). The preference
japaneseCropMarks (General) switches to Japanese marks: double lines at the
trim and bleed edges plus centre marks. Effect > Crop Marks (cropMarks) is a
live effect whose marks follow the object; rendering, SVG/PDF export and
Expand Appearance draw them. The mark geometry lives in doc::marks.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A colour linked to a global or spot swatch keeps a tint (Paint::Solid.tint, 1 by default and
left out of files at 100 %): paint.setFill/setStroke {swatch, tint} apply the swatch at that
percentage, swatch edits recolour every linked colour at its own tint, and Color::tinted
resolves it (CMYK and Gray inks scale, RGB mixes toward white). swatch.new saves a tint as a
tint swatch ("Ink 40%") linked to its base. Spot tints separate as that percentage of their
plate (Separations Preview, PDF Separation value) instead of an ink-ratio guess. Adjust Color
Balance's Global mode (tint) shifts the tints of linked colours. The Color panel shows Tint
mode (the swatch chip, its name and a T slider) for linked colours; the Swatches panel
highlights the tint swatch in use. Gradient stops get the same link and tint fields (the
swatch walks cover them), so GradientStop is no longer Copy.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Fill and stroke layers (and type characters' fill and stroke) carry an
overprint flag. object.setOverprint {fill?, stroke?, item?, ids?} sets it
(groups: their contents; type: its characters too; one undo step, none when
nothing changes) and attributes.info reads it back (null where mixed).
Overprint Preview and Separations Preview draw overprinting fills and strokes
with Multiply. The old Document.unknown["overprintBlack"] id list migrates to
the new flags on load; Overprint Black now sets the flags.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Document::swatches_iter/_mut, swatch_mut, swatch_group_of, remove_swatch and a copy-on-write
walk over linked solid paints (map_solid_paints) cover every colour group.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- New original DrawCraft mark (gradient + pen nib) replaces the two-letter badge
- render: thumbnails and pattern tiles use a single-threaded context (vello's default is
multithreaded and panics on filters); per-item raster effects detected
- Type tool state no longer leaks across documents
- ui.set {status} for clean screenshots
- README: new hero, feature shots, Made in DrawCraft gallery; examples/neon-drive, ribbons,
feature-sheet; ASSETS.md updated; heading renamed to Crafting Apps
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
dotCooCoo