A click with the Ellipse tool opens a dialog with a new Anchors field
under Height, 4 by default. With 4, OK draws the same live ellipse as
before. Any other count from 2 to 1000 draws a closed plain path with
that many smooth anchors spaced evenly by angle, from the left one and
clockwise, with handles of 4/3*tan(theta/4) scaled along each axis and
the path fitted to the typed width and height. The dialog sends the
nearest whole number from 2 to 1000 (4 for an empty field or text that
is not a number). The count confirmed last is kept as the Ellipse
tool's anchors option, and the next Ellipse dialog opens on it.
shape.ellipse takes an optional anchors param (default 4). A number
that is not a whole number from 2 to 1000 gets one error naming that
range, a value that is not a number gets the usual type error, and
nothing is drawn. The MCP draw_shape tool lists anchors for ellipses.
Docs: params text, docs/mcp.md, docs/target-app-parity.md (Shapes).
With Alt held at the press, an Eraser drag draws a marquee from the press
point to the pointer instead of a stroke, and the release erases everything
inside it. Alt+Shift keeps the marquee square on its larger side, Escape
cancels it, and a click or a drag along one axis erases nothing.
path.eraseRegion takes {rect: [x, y, width, height]} in place of points.
Closed paths lose the rectangle's area; open paths are cut where they cross
its edges, found from the exact crossings, so a narrow rectangle across a
long segment still cuts it. A width or height of 0 or less, a non-finite
value, or points and rect together is an error, and nothing erased adds no
undo step.
Docs: docs/mcp.md, docs/ui-parity.md.
A step took the tip halfway between the tips at its ends, turned the
shorter way round. The release reads the pen's pressure and tilt halfway
along the step, and its bearing and rotation halfway the shorter way
round, so a step from no pressure to full pressure with the angle on
Pressure by 90° erases with a level tip there while the outline showed
it upright. Each step now takes the tip of the pen's readings halfway
along it.
A plain drag of the annotator's end handle now slides the end along the
bar's line, at least 10 px from the start, and snaps only to targets on
that line. Alt-drag moves the end freely, changing the length and angle
together, with Shift at Constrain Angle steps. A vector of no length
still moves freely.
Docs: docs/mcp.md, docs/ui-parity.md.
The release reads the bearing of the first point the pen leaned 1° or
more at for the points before it, while the outline kept the set value
there. The outline now takes that bearing too, and starts again when the
first lean arrives, also when a pen tilted in place at the last point
gives it.
Once the pen pressed less than fully, the steps of the outline already
built kept the tip of a stroke without pressure, while the release reads
full pressure at those points. The outline now starts again when the
pressure first counts.
A Tilt, Bearing or Rotation mode set during the drag gave the early
points the pose of later ones. The release reads no poses for such a
stroke, so the outline now keeps the set values for them too, and the
same for a Pressure mode set during the drag.
The outline of the area an Eraser drag covers used the set Angle and
Roundness and varied the Size only with Pressure, while the release
(since #7726) erases with the tip the pen gives at each point on the
Pressure, Tilt, Bearing and Rotation modes.
Each step now takes the tip halfway between those at its ends, read as
the release reads the stroke. A step whose angle or roundness varies is
outlined where its own tip is round, and the parts inside other steps'
areas are removed as before. A pen turned in place gives the last step
the new tip, and a changed mode or Variation starts the outline again.
A round tip whose Size follows the pen shows each step that wide.
Random shows the value itself until the release draws it.
`through` now takes only the ids of the group's edges, each once: a face's
id, an unknown id, another group's edge or an edge given twice is an error
and changes nothing. A hidden edge in it is still skipped by the join. For
a double-click the Bucket passes only edges of the group, each once, so an
earlier click that filled a face whose fill was the edge's stroke paint
(Paint Fills and Paint Strokes both on) no longer sends that face.
The Bucket finds the faces a fill drag crossed among those whose bounds
meet the drag's bounds only.
A canvas test covers the middle-button press and the Space-held press
between two Bucket clicks. The progress-doc line lists the new tests, and
docs/mcp.md says which edges the tool passes in `through`.
Follows #7875.
When a click's press lands in one face and its release in the next, the
drag fills both. The bucket now notes the fill every face the drag
crosses had before the press, the release included, so a double-click
or triple-click that follows on such a face compares that fill instead
of the one the first click gave it. This also holds when the release of
the last click crosses into the clicked face.
When the first click makes the Live Paint group, or merges the selection
into a selected group, the crossed face counts with the fill it was made
with: a kept face's paint from the merged group (an unplaced gradient
fixed to its fit), else the fill Make gives it, the topmost fill that
draws of the front-most source path over it that has one. A selected
group's edges no longer count as source paths.
A double-click whose two clicks land on two joined edges now paints the
edges joined through the other edge its clicks painted:
livePaint.strokeEdge takes `through`, edge ids that the join counts as
drawing with `match`, and the tool passes that edge. When the second
press lands on the next edge and is released back on the first, the
double-click matches the first edge's stroke paint from before the
first click.
A press that the view tools take (held Space, the middle button), or
that holds Cmd/Ctrl and goes to the lent selection tool, now counts as
a press that paints nothing, so the clicks around it are not taken for
one triple-click's: the session tells the tool through the new
Tool::press_elsewhere.
The tool doc, docs/mcp.md and the progress-doc line now say that a click
records an undo step only when it changes a paint, and that a
triple-click paints the faces that have the clicked face's fill (and the
edges that draw with the clicked edge's stroke paint) with the bucket's
paint.
Follows #7291.
A Shift-triple-click on a face whose double-click already reached a
joined face of the same fill selects every face with that fill. The new
test pins that the joined face the double-click toggled on is not
toggled off again by the triple-click.
While the Smooth tool is in use with a path it can smooth selected, the
bar shows the tool's Fidelity field and Tool Options..., which opens the
Smooth tool's options. The field sets Fidelity through tool.setOption
with the same range, unit and steps as the field in the options dialog.
With nothing smoothable selected, the tool shows no bar. The bar leaves
out the selection tools' actions and the Fill, Stroke, Recolor Artwork
and Lock controls. On a canvas too narrow for the field, More Options
lists Fidelity, which opens the tool's options.
The Smooth tool's cursor and the bar share one check of the selection,
which the bar keeps for the document's revision.
While the center is dragged out, Ctrl (Command on macOS) keeps the
center's diameter as the last drag showed it, and the drag sizes the
halo through shape.flare's growth: the halo's radius keeps the ratio to
the pointer's distance that it had when the key went down, within the
Flare Tool Options' 0 to 300 %. Letting the key go sizes the center with
the drag again, and the flare keeps the new growth.
While the rings' end point is placed, Up and Down Arrow add and remove
rings within 0 to 50, and leave the rays as the center drag left them.
Before, they changed the rays in both drags. Each press of ~ (backquote)
sends a new ringSeed. shape.flare takes ringSeed, a whole number below
2^53, and places the rings along the path from a sequence of its own,
keeping their count and sizes and the other parts. seed and ringSeed
given as a fraction, a negative number or a boolean are refused. The
canvas re-hovers the tool when backquote goes down or up, so ~ works with
the pointer held still.
With Rings off, the arrows and ~ do not change the flare in the second
step. Each new flare starts from the options' counts and growth, without
a ringSeed.
While the Selection, Direct Selection or Group Selection tool moves the
selection, or the Gradient tool draws a vector, W and H show the change
in x and y, with the distance and the angle under them. A Scale tool
drag shows its percentages; a Rotate, Reflect or Shear tool drag shows
the center of the selection's box and its angles. The Zoom tool adds the
magnification and the Paintbrush the name of its brush.
W and H follow Use Preview Bounds. With several objects selected, the
panel shows only the fill, stroke and type values they share, and Show
Options adds a tint's swatch and percentage and a gradient's swatch name.
- Tool::readout and Readout (crates/tools/src/readout.rs).
- info.readout returns the selection's size and the tool's readout.
- Docs: docs/mcp.md, docs/ui-parity.md.
- perspective.grid.set rejects an offset that puts a plane behind the
viewer even while Automatic Plane Positioning holds that plane, so the
plane does not vanish when positioning ends.
- The gridline intersection nearest the pointer is found on strongly
skewed planes: each drawn line is searched at the point nearest the
pointer on the page, instead of a few cells around the pointer's
inverse.
- Moves while an artboard name is pressed no longer reach the tool as
hover, so Shift does not position the plane while the button is down.
A subpath's anchors are now an `Anchors` list held in chunks of up to
256 anchors behind `Arc`s. Copying a path copies the chunk table and
shares the chunks, and editing one anchor copies only the chunk that
holds it, so the undo step of a one-anchor edit no longer keeps a copy
of every anchor of the path. Inserting or removing an anchor copies the
chunk it is in and rebuilds the table. Reads and edits follow the Vec
and slice methods the code used; files write and read each subpath's
anchors as one list, as before, within the same anchor read budget.
The undo memory estimate counts only the chunks the other version of
the path does not hold, and the renderer's kept paths compare only the
chunks an edit copied when they look for moved anchors.
Moving one anchor of an open path of 10,000 or 200,000 anchors
(path.moveAnchor, path.setHandle, path.moveAnchors, a nudge) keeps at
most 48 KiB in its undo and redo steps, where it kept 56 bytes per
anchor.
A triple-click with the Live Paint Selection tool on a face now selects
every face of its group with that face's fill, and on an edge every edge
of its group that draws with that edge's stroke paint. Hidden faces and
edges are left out. Before, a triple-click selected only what its third
click selected.
With Shift held, the parts are toggled from the selection there was
before the clicks: the tool keeps what the double-click and the Shift
clicks of the series toggled, and the triple-click toggles those back.
docs/target-app-parity.md's Live Paint Selection line says so.
A drag or release within a pixel of the last stroke point now gives
that point the pen's tilt and rotation, so the outline and the erased
area follow a pen turned or tilted in place. A release without a pen
reading keeps the last pose. The outline's size on Pressure, Tilt,
Bearing or Rotation goes past 1296 pt, as path.eraseRegion sweeps it.
Eraser Tool Options gives Angle, Roundness and Size each a variation menu
(Fixed, Random, Pressure, Tilt, Bearing, Rotation) and a Variation field.
path.eraseRegion takes angleMode, roundnessMode and sizeMode with their
variations, sweeps a varying tip as a Calligraphic nib with what the pen
read along the drag, and refuses an unknown mode or a variation out of
range. The Eraser records the pen's pressure, tilt and rotation when a
mode follows them, and its tip outline at the pointer takes the angle,
roundness and size the pen gives while it erases.
Type on an open path can now start before the path's start: its start
is stored below 0, the span runs from there, and the characters whose
middle falls before the path's start are not drawn, as SVG 2 lays out
text on a path (https://www.w3.org/TR/SVG2/text.html#TextLayoutPath).
The text keeps every character, and the start bracket stays at the
path's start. Past the path's end, text that does not fit is overflow,
as for other type on a path. Type that starts on the path draws every
glyph as before.
- SVG import keeps a <textPath> start before an open path's start
(text-anchor end or middle, or a negative startOffset) instead of
starting the text at the path's start, which drew every character.
- SVG export writes it as a negative startOffset.
- PDF export writes only the characters drawn on the path.
- The legacy .ai and .ai editing data writers write the type from the
path's start with the type attributes warning.
- type.pathOptions takes a start below 0 for type on an open path; on a
closed path it is the path's start, as before. A flip starts the type
at its start bracket. Dragging the center bracket slides it from where
it starts, and no further before the path.
- A click at the path's start places the caret by the first drawn
character, and the caret in the hidden characters stands at the
path's start. The highlight of substituted fonts and glyphs leaves
them out.
- Release Type on a Path keeps the first drawn glyph where it was
drawn, with the hidden characters before it.
- The Touch Type tool shows no box for a hidden character, and
text.touchType returns an error for one. A character with a drawn
glyph is changed by that glyph.
Docs: docs/mcp.md, docs/target-app-parity.md.
When the third click of a triple-click landed on a face or edge that
the double-click before it had painted (a neighbor the flood or the edge
walk reached), the triple-click sent that part's new paint as match,
since only the clicked part's paint was recorded. The bucket now records
the fill or drawn stroke paint of every other part a double-click
reaches, and a triple-click on one of them matches the paint it had
before the double-click. docs/mcp.md says so.
livePaint.strokeEdge wrote the paint and weight into an edge's topmost
stroke even when that stroke was hidden. An edge whose hidden top stroke
sat over a drawn one kept drawing its old paint, and since the edge
scopes now match the paint an edge draws, a samePaint or connected
stroke reached such edges and changed nothing on screen. The command now
paints the topmost stroke that is shown, and adds a stroke above the
others when every stroke is hidden or there is none. The "nothing
changes" check reads the same stroke.
The doc comments of the scopes and of the press record describe the
drawn stroke paint, and the engine names Paint through its parent module
instead of in the import list. Live Paint Selection's comment on a
triple-click states that the tool takes no action on it.
New tests cover the edge the tool matches on a multi-click over a hidden
or fully transparent edge, the connected edge scope through transparent
and hidden edges, and painting the shown stroke.