With one whole blend selected, the Selection and Blend tools show two
widgets at the halfway point of its spine. Dragging the upper widget
along the spine sets the color shift (-100 to 100), and dragging the
lower one sets the easing strength (0 to 100). The lower widget shows
only when the steps follow a spine (a replaced spine or Align to Path),
the rule the step placement uses; a blend made without a spine shows
neither. When the boxes of three or more other visible objects hold a
widget's spot, the widget moves out in 16 px steps, up to 144 px, and
its line to the halfway point grows with it. While a widget is held,
the arrow keys step its value by 1 (Shift: by 10), and Escape or a
switch to another tool cancels the drag. A drag is one undo step; a
click or a drag that ends where it started records none.
- object.blend.setEasing sets easingType, ramp and colorShift on one
blend, refuses a hidden or locked blend and easing on a blend without
a spine, and records no undo step when nothing changes.
- BlendSpec::eases_along_spine holds the rule the step placement and
the widget share.
- While a tool is busy, an arrow it claims arrives with the press's
Shift and Alt; before, it always arrived plain.
Docs: docs/mcp.md, docs/target-app-parity.md.
Effect › 3D and Materials › 3D (Classic) › Rotate (Classic)… turns every
fill and stroke as one flat plane, as Rotate does, and shades it with the
classic No Shading or Diffuse surface.
- `effect.apply` with `threeD.classicRotate`: the Position rotation and
Perspective, `surface` (`none` or `diffuse`), the classic lights,
Ambient Light, Blend Steps and Shading Color. It has no highlight, no
Draw Hidden Faces and no shadow.
- The dialog shows Position on the Rotation tab and the surface and
lights on the Lighting tab, with no Object tab.
- Groups and layers turn about one shared center, and the effect also
goes on a fill or stroke, as Rotate's does.
- `effect.lightingPreset` refuses it, as it refuses the other classic
3D effects.
- Unknown parameters, numbers out of range, bad flags, a surface other
than No Shading or Diffuse and bad shading colors are refused with an
error.
Effect › 3D and Materials › 3D (Classic) › Revolve (Classic)… sweeps the
profile round a vertical axis, as Revolve does, and draws every face with
the Wireframe, No Shading, Diffuse and Plastic surfaces of Extrude & Bevel
(Classic).
- `effect.apply` with `threeD.classicRevolve`: Angle (0 to 360), Cap,
Offset (0 to 1000 pt) from the left or right edge of the profile's
bounds, the Position rotation and Perspective, and the classic lights,
Ambient Light, highlight, Blend Steps and Shading Color.
- Groups and layers revolve about one shared axis, and the effect also
goes on a fill or stroke, as Revolve's does.
- `effect.lightingPreset` refuses it, as it refuses Extrude & Bevel
(Classic).
- Revolve faces carry their view-space normal, and
`three_d::revolve_facets` hands them to the classic surface code.
- Unknown parameters, numbers out of range and bad flags, edges,
surfaces and colors are refused with an error.
Paragraph Style Options and New Paragraph Style gain a Tabs section. It
lists the style's stops and edits the selected stop's Alignment, position
(X:, or Y: for vertical type), Leader and Align On character. Add puts a
left stop 36 pt past the furthest one, Delete Tab removes the selected
stop, and Clear All Tabs leaves the style with no stops. OK sorts the
stops by position and keeps the stop edited last when two share one
position. Reset Panel removes the style's tabs.
paraStyle.new, paraStyle.setAttrs and paraStyle.edit check changed tabs
stop by stop: at most 256 stops, and each changed stop's position from 0
to 100000 pt and leader of at most 8 characters. Stops the style already
has are kept as they are. Changed tabs are sorted by position, keeping
the first of stops at one position. text.tabs.set rejects a leader longer
than 8 characters, an Align On value of more than one character and more
than 256 stops. Loading paragraph styles skips a style whose indents,
spacing, hyphenation, justification or tabs are out of range.
Docs: docs/mcp.md, docs/target-app-parity.md.
- ui.dock's move takes a hidden panel's shown id in target, as the other
docking destinations do.
- Shortcut overrides keyed panel:<panel id>, saved and in an open
Keyboard Shortcuts dialog, show the panel id shown for a library
outside the read roots, also when nothing else refers to it.
- Outside Windows, a native path is matched only as written: a sent
/out/weird/name.svg no longer renames a hidden library at
/out/weird\name.svg, and a reply does not read one as a spelling of the
other. Windows paths are still matched with either separator.
A command given a key without a modifier did not open the slider or
dialog that its menu item and its chords open. With Smooth on F,
pressing F opened no slider, and Offset Path, Reflect, Average, Split
Into Grid, Vector Halftone, Divide into Dashes and Find Nearest Swatch
changed the document at once with their default values. The single-key
handler ran the command directly, while a chord goes through the menu's
route. Single-key presses now take the chord's route (run_hit), so
Smooth and Simplify show their sliders, and Offset Path, Move, Rotate,
Scale, Reflect, Shear, Transform Each, Average, Average & Join, Split
Into Grid, Vector Halftone, Rearrange All Artboards, Pathfinder Options,
Arrange in Grid, Divide into Dashes and Find Nearest Swatch open their
dialogs. Commands without a dialog still run at once. On that route a
single key also finishes a pending tool edit before its command runs,
as a chord does.
Holding a key that opened a dialog or the palette no longer types into
it: the key's repeats and the text they type are held back until the
key is let go. With Move on F, holding F typed "ffffffff" into Move's
first field. A shortcut that opens a dialog or the palette also stops
the shortcuts after it in the same frame, single keys and chords alike,
so they no longer change the document behind the dialog.
The drag out of the rulers' corner was ended only by the rulers' own
input, which the canvas skips while the rulers are hidden (View › Rulers,
Presentation Mode). Hiding them mid-drag left the drag's snapping guides
on the canvas and its state open until the rulers came back.
The canvas now ends the drag, cancelled, while the rulers are hidden,
through the same helper a release uses.
The zero point dragged out of the box where the rulers meet snaps as a
Pen or shape tool's point does: with Smart Guides onto the anchors,
centres, edges and paths of the art and the artboards or into line with
them, with Snap to Point onto the anchors and along the ruler guides,
else onto whole pixels or the grid. The guides showing what it snapped
to show during the drag and go when it is released or cancelled
(Escape, focus loss, another document). The origin is still set once,
on release (document.setRulerOrigin, one undo step).
The engine snaps it (Session::ruler_origin_drag, with the tools crate's
rulerguide::OriginDrag over PointSnap::drawn), as it does a guide
dragged out of a ruler.
Art Alt-dragged (Option-dragged on macOS) from the canvas onto a
scatter, art or pattern brush in the Brushes panel becomes its art
(brush.replaceArt). When strokes use the brush, the app checks the art
first, then a dialog offers Apply to Strokes, which redraws them with
the new art, Leave Strokes, which keeps the brush and its strokes as
they were and adds "<name> copy" with the new art as the current brush,
and Cancel. Each change is one undo step.
A pattern brush takes back the tile groups brush.placeArt places, frames
included, and takes other art as its side tile. Calligraphic and
bristle brushes, an empty selection and art with no width are refused.
Art Alt-dragged off the canvas now reaches the panels as the art the
drag started with. Before, the panels got the ids of the copy the drag
previews, which no longer exist once the release over a panel ends the
move.
brush.new now also measures a symbol instance in the selected art by its
symbol's art when it checks that the art has width.
Docs: docs/mcp.md, docs/target-app-parity.md.
A scatter, art or pattern brush dragged from the Brushes panel onto an
empty part of the canvas places a copy of its art there to edit,
centered where it is dropped (brush.placeArt). Dropped on a path, a
brush is still applied to it. A pattern brush is placed as its tiles in
a row, 10 pt apart, each in a group named for its tile, with an
unpainted rectangle at the back of a tile that has a repeat frame.
Calligraphic and bristle brushes have no art and are refused. A symbol
instance in the art is measured by its symbol's art.
Docs: docs/mcp.md, docs/target-app-parity.md.
A manifest whose `commands` value is not a list, whose entry is not an
object, or whose command `id` or `label` is not a string was refused with
serde's own text ("invalid type: ..., expected command [0] as {id, label,
params?}"), and no catalog had rows for it or for the reader's other
`commands` messages. The reader now gives its own message for each of
these cases, and the complete-message catalogs translate them, together
with "missing field", "duplicate field" and the manifest prefix with its
line and column.
An approval question that a control request, MCP, injected input, or a
file dialog one of them opened leads to now keeps OK disabled and
refuses every confirm, a person's click included. The dialog says to
choose Object › Plug-ins › Install Plug-in…, and ui.installPlugin answers
approval: "personMustStartInstall". The person's own Install Plug-in…,
File › Open or drop inspects the module again and asks a new question
with its half-second delay.
The origin is fixed when the request is made and goes with a native
file dialog's deferred answer and the web picker's answers, which now
arrive apart from drops and from window.vectorcraft.openFile (always
automation). A question about taking another module's place now opens
in the approval dialog, and automation's replace: true no longer skips
it. A module that needs no approval still installs at once.
- Outside Windows a `\` stays part of a hidden library's or sent path's
file name; another platform's absolute path is still split on `\`.
- A hidden relative path is matched after leading `./` and `../` parts
only when they start the path, so `/work/./data/icon.svg` keeps its
text.
- `ui.inspect` and `ui.docking` replies are hidden once, so a library
at the top of the file system shows as `loaded/<file name>` with its
separator.
The hover lists up to 30 notes, fewer when the window is small, and says how many were left out. The docs and command description said it lists them all.
dotCooCoo