- object.expand.info reports no gradient or fill to expand for a
gradient that repeats in more runs across its box than are written,
matching object.expand, which leaves it a gradient. For a path that a
painting live effect draws, it measures each piece the effect returns.
- CSS writes a repeating gradient's stop positions, and a repeating
radial gradient's radius, with enough decimals that their rounding
adds up to at most a hundredth of a period across the box (at least
four for positions and three for the radius).
- docs/mcp.md says that sharp steps and swatch-linked stops are the last
to be left out rather than always kept, and that the CSS conic limit
counts stops before midpoints and Perceptual curves add more.
When a repeated or reflected gradient needs more stops than a limit
allows, each run now leaves out the stops that change its colors
least, so every run is still written, instead of writing fewer runs
and padding the rest with the last color. Each run keeps its ends,
sharp steps, swatch-linked stops, tint and CMYK ink changes and spans
shaped by an off-center midpoint, and the colors are compared as the
gradient's method mixes them. This applies to gradients along or across
a stroke, CSS conic gradients, and PDF, EPS and .ai export.
- Outline Stroke's mesh fits the gradient to at most 1,024 stops, and
splits a stroke into several meshes when one would hold more than
2^20 points.
- Object > Expand leaves a gradient as it is when the box needs more
than 256 runs, instead of expanding only the first runs.
- CSS writes the stop positions of repeating gradients with four
decimals, so the period stays in place across the box.
- A swatch chip of a gradient that repeats gets at least four grid
cells a run along each side (at most one a point, and 128), so it
does not show one color when the count matches the chip's cells.
- docs/mcp.md states the stop limits and the PDF import sample budget.
A linear, radial, conic or diamond gradient has a spread: Pad (the
default, as before), Repeat or Reflect, with a count of 1 to 100
(VectorCraft's own limit). Repeat and Reflect run the stops that many
times along the vector (around the turn for a conic) and keep going past
both ends, Reflect running every other run backwards, as SVG's
spreadMethod does.
The Gradient panel has a Spread menu and a Repeats field, and the
Gradient tool marks where the runs meet. paint.setFill and
paint.editGradient take `spread` and `repeats`; bad values are errors.
Presets, swatches, blends, strokes along or across a path, Outline
Stroke and Object › Expand follow the spread; Expand gives each run the
same whole number of objects, and Outline Stroke's mesh keeps the color
on each side of a sharp step between two stops at one offset.
SVG writes and reads spreadMethod: SVG import now reads a repeating or
reflecting gradient as one that repeats or reflects once, instead of
expanding its stops over the shape. CSS writes repeating gradients.
PDF writes a conic's sweep shading over one run. PDF, EPS, legacy .ai
and the .ai editing data write the other kinds with their stops
repeated across the shape: at most 256 runs and 16,384 stops (256 stops
in .ai files), and for a radial or diamond no farther than 65,536 runs
from its center, with a warning past those. PDF import now finds sharp
steps in any axial or radial shading instead of blurring them.
Docs: docs/mcp.md (Spread), docs/target-app-parity.md, docs/gaps.md.
A new gradient kind, `diamond`, runs its stops from the center (the
start) out to a square with a corner at the end of the vector; the
aspect stretches the square across the vector into a rhombus. The
Gradient panel's Type row has a Diamond button, the Gradient tool draws
the square with the aspect handle and center ring, and a gradient
fitted to an object covers its box.
- Model and canvas: the level is |x| + |y| in the square's frame; a
square with no area (no vector, an aspect of 0, numbers out of range)
paints the last stop. The canvas draws it as pixels, out to a
stroke's miters, caps and arrowheads. Transforms keep the vector and
take the mapped size across it as the aspect.
- Commands: `paint.setFill`, `paint.editGradient` and
`paint.setGradientGeom` take `kind: "diamond"`; a negative aspect or
a focal point is an error. A conic or diamond gradient that a plug-in
returns with a focal point loses the focal point.
- Gradient tool: dragging the aspect handle of a radial or diamond
gradient whose file gave it a negative aspect now sets a positive
aspect; only a conic's negative aspect mirrors it.
- Export: PDF, SVG, EPS and legacy .ai write four linear gradients, one
for each quarter of the square, clipped to the shape (PDF as axial
shadings). PDF and SVG write an image for translucent stops, a
dithered fill or a flat square, and for the Perceptual method unless
PDF writes the stops as spot color shadings. SVG writes a diamond on
type characters as a radial gradient through the corners, and so
does CSS. A swatch library saved as CSS gets four corner layers, a
value for the `background` property (a circle when the swatch is
turned by an angle that is not a multiple of 90 degrees). The .ai
editing data holds a radial gradient through the corners. The
document exports give a warning.
- SVG export: a stroke drawn as an image, as conic wedges or as diamond
quarters now covers the miters, caps and arrowheads that reach past
its paint box.
- PDF import reads a function-based shading whose color is the same
along each square about the origin of its space as a diamond.
- Object > Expand gives nested squares or a mesh of rings.
Docs: docs/mcp.md, docs/target-app-parity.md.
A fourth gradient kind, conic (also accepted as `angle` or `conical`),
sweeps the stops once around the center (the gradient's start),
clockwise on the page from the vector, with a seam where the last stop
meets the first. A negative aspect mirrors the sweep, and reflecting an
object turns its sweep the other way, also for a conic without a
vector or with a flat extent.
- Gradient panel: a Conic button in the Type row; the Aspect Ratio
field works for conic gradients and keeps a mirrored sweep mirrored.
- Gradient tool: the extent ellipse, aspect handle and center ring of a
radial gradient, without a focal point.
- Rendering, swatch chips, transforms, warps, plug-in round trips, and
Object > Expand into wedges or a mesh of columns around the center.
- Commands: a negative `aspect` is an error for linear and radial
gradients, and so is a `focal` point for a conic gradient.
- PDF export writes a function-based shading whose calculator function
turns the angle into the ramp, and PDF import reads a function-based
shading that turns around the origin of its space back as a conic
gradient, also when that origin lies outside the painted area. A
PDF/A file, or a conic with more than 97 stops, gets an image
instead.
- SVG export writes 360 solid wedges clipped to the shape for opaque
stops and an image otherwise, and a linear gradient on characters.
- CSS export writes `conic-gradient(from ...)`, with the stops mirrored
for a mirrored sweep.
- EPS and legacy .ai export write 360 solid wedges; the .ai editing data
holds a linear gradient along the vector with the same stops.
- .af files: conical gradients open as conic gradients.
- An export that writes the gradient in another form gives a warning.
Supersedes #2326 and includes switch87's code from it.
Co-authored-by: Gert Pellin <gert@pellin.be>
Type › Dynamic Text (`type.dynamicText`, also on the Contextual Task Bar
for type on a path) scales the text by one factor so it fills the span
between its start and end brackets, and the layout fits it again after
each edit to the text, the path or a bracket. The first character's
size moves in 0.1 pt steps within 0.1 to 1,296 pt. Turning it off, or
threading the type, keeps the sizes it was drawn at.
- The model saves `dynamicText` only when on.
- SVG, the legacy .ai writer and the .ai editing data write the drawn
sizes through `vectorcraft_text::drawn`; the editing data warns that
the setting is not written.
- Shrink Text to Fit and Dynamic Text step the size the Character panel
shows when a size measures the cap height, x-height or ICF box.
Docs: docs/mcp.md, docs/type-parity.md, docs/target-app-parity.md.
Part of #4134.
In horizontal type, tracking and manual kerning are now thousandths of
the em as the Horizontal Scale draws it: at 50%, a tracking of 100 adds
0.05 em after each character. They were added at the full em while the
glyph advances took the scale, so narrow tracked type drifted from the
page of users' .ai files letter by letter. That page writes such type's
character spacing as the tracking itself in a text space as wide as the
scale, which PDF scales by it (ISO 32000-1 9.4.4). Vertical type keeps
the full em: its advances down the column don't all take the scale.
vectorcraft_text::spacing_scale gives the factor. Shaping, inline
graphics and the Optical pairs use it, and so do the conversions from
points back to thousandths of an em: the automatic kerning the Character
panel reads and Touch Type's limits (glyph_em), Combine Point Text, and
PDF import, whose tracking is now the file's Tc. Scale Text Attributes
now keeps tracked type where a horizontal stretch drew it.
SVG export writes letter-spacing in thousandths of the font size it
writes (the vertical scale), so uniformly scaled type keeps its spacing
in a viewer.
Type with both a Horizontal Scale other than 100% and tracking or manual
kerning lays out differently than before, in every document.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Features take a value (tag=N) in style commands, SVG and native files. Runs that
differ only in their feature lists are shaped in one buffer with ranged features, so
an alternate on one letter of an Arabic word keeps the word joined. FontFace reads
GSUB once (alternate sets, singles, the feature reaching a glyph), names unencoded
glyphs, and alternates_in_context finds a character's alternates in its word.
text.setRangeStyle takes glyphAlternate: null.
Store corner radii as fractions of each corner's max so rounding scales with the shape; expose via Corners dialog and object.setLiveShape relativeRadii.
Co-authored-by: Cursor <cursoragent@cursor.com>
Shrink Text to Fit scales area type down at layout time, and the canvas,
PDF export and the exports that write type as outlines draw it at that
size. SVG export wrote the live text at its stored font size, letter
spacing and baseline shift, so a viewer drew it larger than the canvas
does. Legacy .ai saves wrote the stored size, leading and baseline shift
into the text objects, DXF export took the TEXT heights from the stored
size, and the CSS Properties panel gave the stored font size, letter
spacing and line height.
The text crate's scaled, which the layout scales shrunk text with, is
now public. SVG export, legacy .ai saves and the CSS Properties panel
take the type's styles from it at the layout's fit scale, and DXF
export multiplies the TEXT heights by that scale. Positions and
textLength in SVG still come from the layout.
Docs: docs/target-app-parity.md.
VectorCraft listed a variable font's named instances as styles, but
type could not be set between or past them. The reference app's
Character panel has a Variable Font control that adjusts a variable
font's axes, such as Weight, Width and Slant.
Type now keeps Variable Font settings by axis tag
(CharStyle::font_axes, saved as fontAxes only when set). text.setFormat
and text.setRangeStyle take fontAxes: each value is clamped to its
axis's range, a tag the font has no axis for is left out, and null
goes back to the style's own setting. Another font or style clears
them, including one from a character style that does not set them. A
character style captured from type sets them, with {} for none.
text.fontList {family, style} lists a font's axes.
Layout, outlines, the substituted-glyph highlight and PDF export use
the font instanced at the settings, and neighboring runs at different
settings are shaped apart, as runs in different fonts are. SVG export
writes them as font-variation-settings, the wght setting as the weight
and the wdth setting as font-stretch, and embeds the font instanced
there; SVG import reads font-variation-settings back. Legacy .ai export
warns that the settings are left out.
The Character panel shows a Variable Font button for a variable font.
It opens a slider and a field for each axis the font does not hide,
labeled with the font's name for the axis, and screen readers get each
slider under that name. A drag is one undo step. Reset Panel leaves
the settings, as it leaves the font and style.
Missing Glyph Protection now keeps the settings and the font version
on the characters that keep their font; before, it kept only the
family and style. A character style applied or redefined with another
font now clears the old font's version, as text.setStyle does, unless
the style sets one. SVG export with embedded fonts warns when faces of
one weight, style and width share characters, which browsers then draw
in one of the faces.
Docs: docs/mcp.md, docs/target-app-parity.md, docs/type-parity.md.
Rearrange All Artboards, Select › All on Active Artboard (for objects
with no area), Copy's source artboard for Paste in Place, Align to
Artboard without an index, Crop Image, the Crop Image tool, Place with
`at`, CSS positions and a filter plug-in's artboard decided whether a
point or an object's center is on an artboard with Rect::contains,
which leaves out the right and bottom edges. A line along an artboard's right or
bottom edge was on no artboard: Rearrange left it behind, and All on
Active Artboard did not select it. Document::art_on_artboard counts
art flush with those edges (#890).
They now count the edges as art_on_artboard does, within a millionth
of a point. On an edge two artboards share, the artboard to the right
of it or below it still holds the point. All on Active Artboard
selects a line on a shared edge from either artboard. A press exactly
on a right or bottom edge now picks that artboard, and the Artboard
tool's cursor shows Move there.
Found while testing crates/svg/src/css.rs:84 (font_props)
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
A corner's radius was capped at half its shorter side whatever its neighbours did, so one corner of a 100 pt square rounded alone stopped at 50 pt. Each corner now rounds until its cut reaches the cuts its neighbours ask for: the whole side when the neighbour is square, halfway when both ask for more. The corner widget drag, the red limit outline and CSS border-radius export follow the same limit.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Effect menu had no Rasterize. Object › Rasterize replaces the
object with an image, so its paths can no longer be edited.
Effect › Rasterize… (`rasterize`) is a live effect with Object ›
Rasterize's options: color model, resolution (the document's raster
effects resolution by default), white or transparent background,
anti-aliasing, Create Clipping Mask and Add Around Object. The canvas
draws the object as square pixels over its bounds, and its paths, type
and other art stay as they are. The effects above it in the stack,
shadows included, are part of its image, and shadows below it are cast
by the image. When Rasterize is an object's only raster effect, Expand
Appearance and PDF and SVG export give the image Object › Rasterize
gives with the same options.
Object › Rasterize now measures the art as drawn, with its geometry
effects, brush art and raster effects, so a Transform effect that moves
the art no longer leaves the image empty. Its Create Clipping Mask
clips the image to the art as drawn. The canvas no longer panics
drawing a pixel effect such as Gaussian Blur on an object about 65,500
screen pixels wide: the raster of such an object is at most 32,768
pixels a side, and the object is drawn into it at a lower resolution.
Docs: docs/mcp.md, docs/effects-parity.md, docs/target-app-parity.md,
ROADMAP.
The reference app's Drop Shadow has a Color and a Darkness, the
percentage of black added to the object's own colors. Drop Shadow had
only a Color, so every shadow was one color. Choosing one or the other,
and the defaults, are VectorCraft's own.
Drop Shadow now takes `shade` ("color" or "darkness", default "color")
and `darkness` (%, default 100). Its dialog and the Appearance panel's
inline editor show Color and Darkness as radio buttons. With Darkness
d, a CMYK document keeps the object's cyan, magenta and yellow and
raises its black from K to K + d × (1 − K), and an RGB document
multiplies each channel by 1 − d, so in RGB 0% gives the object's
color and 100% gives black. A shadow saved without these keys draws as
before. SVG export writes a Darkness shadow with feComponentTransfer
and SVG import reads it back; CSS export leaves it out.
Docs: docs/target-app-parity.md.
Rarely set fields move into one optional boxed NodeExtras, and large NodeKind payloads (images,
live shapes, blends, envelopes) are boxed. Every object, and every undo step that copies it,
shrinks: a 50k-path move keeps ~24.5 MB per step instead of ~40 MB. Files stay byte-identical
(Node keeps its flat JSON through a borrowed Serialize and a from-wire Deserialize, no flatten),
and loading is slightly faster. Undo and redo reuse their step's size estimate instead of
walking the document again (8.3 -> 5.6 ms for a 50k-path move).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VmMmc1J8XeNLxhRihWv9cc
# Conflicts:
# crates/engine/src/cmd/graph.rs
# crates/svg/src/export.rs
A character attribute (Character panel menu with the East Asian options;
`text.setFormat` / `text.setRangeStyle {proportionalMetrics}`), saved only
when on. In horizontal type it applies `palt`; vertical type sets as before
until the vertical shaping change (`vpal`) follows.
Line-end Punctuation Half Width takes nothing more off the punctuation
`palt` re-spaced (the flush opening bracket, consecutive punctuation, the
line-end half width): the segment is shaped once more without `palt`, and
the glyphs whose advance differs are marked. Punctuation the font leaves
full width is trimmed as before. SVG writes `"palt" 1` with the
character's other features.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The brands check keeps other products' names out of user-facing text; #694's
SVG warnings called Radial Blur, Smart Blur and Unsharp Mask "Photoshop-style
raster effects". They are "pixel effects" now.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Effect › Blur › Radial Blur (spin/zoom, draft/good/best) and Smart Blur
(Normal mode), Effect › Sharpen › Unsharp Mask: Photoshop-style filters in
vectorcraft_effects::pixel, run by the renderer on the object's pixels in
stack order with Gaussian Blur and Feather, cached while panning; lengths in
points, bounded work per pixel. PDF, Expand Appearance and SVG export write
the effected objects as images. Dialogs with preview (method/quality
dropdowns, fields in documented order), menu entries, translations, tests.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Each paragraph has its own alignment, indents, spacing, hyphenation, tab
stops and paragraph style (TextObject.paras; para stays paragraph 0's, so
old files and readers work). Layout, editing (split/merge), threads, the
Paragraph/Tabs/Paragraph Styles panels, ranged text.setStyle/setFormat/
tabs/paraStyle.apply, SVG export/import and the fuzzers follow.
An SVG used as an animation rig lost its hidden alternates and their
rotation pivots: the exporter left hidden objects out (only hidden layers
could be kept), and the importer dropped data-* attributes.
- SVG export: hiddenLayers (on by default for document.save, as before)
now keeps hidden objects too, each written display="none" on its own
element (path, image, text or group). Exports still leave them out
unless asked; the CLI's convert asks, as a conversion keeps the
document.
- An object's own data: ObjectAttributes.data, the data-* attributes in
order (ours, data-name and data-vc-*, aside). The importer keeps them on
the objects and layers they belong to (at most 64 per element), the
exporter writes them back, the native format saves them (missing in
older files), and object.setProps {data: {key: value|null}} sets or
removes them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Corner widgets only ever showed on live rectangles: CornerWidgets::of bailed
out unless the selection's live shape was LiveShape::Rectangle, and
object.setLiveShape only edited rectangle radii. A star is a plain path, so it
had no widgets with either selection tool.
- geom::corners: the corners of any path (anchors without handles between two
straight sides) and the path with them cut round, inverted round or
chamfered, each corner a circle tangent to both sides, its radius no larger
than takes the cut halfway along its shorter side. Rectangles now cut their
corners with it (bit-identical anchors and layout).
- doc::corners::LiveCorners/set_corners: one model for a live rectangle's,
a live polygon's (new radii/kinds) and any other path's corners (new
LiveShape::Path keeping the uncut outline, plain again once nothing is cut);
radii scale with transforms (Scale Corners) and stay circular.
- object.setLiveShape takes anchor indices for `corners` on any path; polygons
keep a shared radius as their sides change.
- Widgets: Direct Selection on any path, Selection on live rectangles and
polygons; placed on each corner's bisector, the drag follows it, the red
limit outline marks corners at their own limit; the angle preference and
View > Hide Corner Widget apply. Corners dialog and the Properties and
Transform panels' Corner Radius (now on polygons too) work on them.
- Tests for the star, the polygon and a pen path in geom, doc, tools, engine
and ui-egui; docs and ROADMAP.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Live rectangles drew elliptical corners after an uneven scale in v0.4.0;
inconsistent on a rectangle that isn't square:
- doc: LiveShape::fold_scale moves an uneven scale left in `xf` (files
saved before #291) into the size and radii; `transform` uses it, and
`folded()`/`corner_style` give Live Corners document units.
- engine: object.setLiveShape folds that scale first, so setting a radius
or kind (fields, dialog, widgets, MCP) gives circular corners on such
shapes instead of keeping the ellipses.
- geom: max_corner_radius/fitted_corner_radius are the one limit every
corner shares (half the shorter side).
- tools: corner widgets sit at the centres of the corners as drawn (a
radius past the limit put them off the arc, further in along the long
side), drag in document units on stretched shapes, and outline the
edited corners in red at the limit, as the reference app does.
- svg: CSS export writes the drawn radii (CSS would draw a radius past the
limit when its neighbours leave room).
- docs: mcp.md Live Corners, ROADMAP.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A live rectangle stored four corner radii but drew them all with the largest,
and the corner widgets always rounded all four corners, so one corner could not
be rounded on its own.
- geom: rectangle_with_corners draws each corner with its own radius and kind
(Round, Inverted Round, Chamfer); a sharp corner is one anchor, a cut one two.
Uniform corners keep the exact rounded-rectangle anchors.
- doc: LiveShape::Rectangle gains `kinds` (saved only when a corner isn't round;
older files read as round), plus helpers mapping anchors to corners.
- engine: object.setLiveShape takes `corners` and `kind`; without `corners` it
edits the Direct-Selected corners, else all four, and keeps the selected
corners selected as their anchors change.
- tools: with Direct Selection, only the selected corners show widgets and a
drag rounds just those; Alt-click cycles the corner kind; double-click opens
the new Corners dialog (also `ui.corners`).
- ui: Properties/Transform radius fields show and set the selected corners;
CSS export keeps per-corner radii and skips cut-in corners.
- docs: mcp.md (Live Corners), control-protocol.md (Corners dialog), ROADMAP.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Unicode bidi (unicode-bidi, unicode-script, unicode-general-category):
each paragraph's direction from its first strong character, Hebrew and
Arabic shaped right to left, embedded Latin and numbers keep theirs,
lines wrapped in logical order and reordered per line by whole
clusters; source text, undo and style ranges stay logical.
- Caret, hit testing, selection and the arrow keys follow the visual
order.
- New text aligns automatically: right-to-left paragraphs right, others
left (Justify::Auto, text.setStyle {justify: "auto"}); the Paragraph
panel highlights the resolved alignment and has an Automatic alignment
toggle. Explicit alignments, and older documents', are kept.
- SVG export outlines bidirectional text (with a warning) until it can
be written as directional live text.
font_props wrote `bold` for any style whose name contained bold, black
or heavy and nothing for the others unless fonts were embedded, so
Semibold came back Bold and Light or Medium came back Regular. It now
writes the style's numeric weight (font_descriptor, from style_weight)
for every writer: 600 for Semibold, 300 for Light, 900 for Black, `bold`
for 700 and nothing for 400. The SVG import already reads these numbers
back to the matching face.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The svg crate's new CSS writer (css_rules) gives the CSS web pages style objects
with: rectangles and ellipses as background-color / linear-/radial-gradient(),
border and border-radius; type as font, color, spacing and alignment; shadows,
glows and blur as box-shadow, text-shadow and filter. It shares SVG export's
declarations (transparency, fonts, type spacing, colours, gradient stops), which
moved into svg/src/css.rs. Options: units, absolute position, width and height,
unnamed objects, rasterize unsupported art (as a PNG background-image).
Commands css.selection, css.generate and css.export; UI commands css.copy and
css.exportFile; the CSS Properties panel with a highlighted code view.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>