The reader stops a whole file past 4,000,000 objects (MAX_NODES), and
the writer had no limit of its own. The writer now counts the objects
it writes as the reader counts them, across layers, symbol and pattern
definitions, opacity masks and art styles, and leaves out art past the
limit with a warning. Art that does not fit is given back as a whole:
a mask, a pattern or a symbol definition is left out with all its art,
and a symbol's definition is written only with room for its instance.
The limit is the reader's own constant, re-exported as
MAX_EDITING_OBJECTS.
A global or spot color that a symbol library's art links to and whose
name a color group of the document has now comes in under a free variant
of the name, which the art then names, as for a name another swatch has.
Swatches and color groups share one set of names.
A Pattern brush reads its scale from 3 or more numbers (the older form's
8 too) and isn't read with fewer; an 8-number Art brush is the older form
whatever its first number. The module notes say the count tells the form.
A Scatter brush in a .ai or EPS file's editing data always came into
the Brushes panel keeping its art's colors. A Scatter brush whose last
15 numbers start with 1 now opens in Tints, and one whose numbers start
with 0 keeps its art's colors. Other values are not read and keep the
art's colors. The field before the art's name does not decide it: an
object whose first field is 1 is read by its 15 numbers, and a Scatter
object with 8 numbers is still left out.
A brush's art usually comes in a group after its frame, an unpainted
rectangle around the art. The reader kept that rectangle as part of
the brush's art. It now leaves out a frame at the art's bounds (within
1/1000 pt): an unnamed, unpainted rectangle with its four corners in
order, closed, or open with its first corner again at the end, and no
settings of its own (shown, unlocked, at full opacity in Normal, with
no effects, note or other attributes). A wider frame stays in the art,
and so do a path that crosses the corners, an open path along three
sides and a rectangle with settings of its own. A group left with one
object becomes that object, unless it has a state or look of its own
(hidden, locked, isolated, knockout, an opacity, a blend mode, a name,
a mask, a note or another setting, or an appearance); then it stays a
group without the frame. The rule applies to every brush art section.
Existing files with such brushes now open with Tints and without the
extra frame path in the brush's art. With an exact frame, the pieces
that a Scatter or Art brush draws along a path stay where they were.
The Scatter, Art and Pattern brush colorization options, Tints among
them, are described on pages 281-282 of
https://web.archive.org/web/20210601162814/https://helpx.adobe.com/pdf/illustrator_reference.pdf#page=281
Tests cover Scatter brushes whose numbers start with 1 and 0, with a
first field of 1 and 2, and an 8-number object. They cover frames kept
or left out (exact, wider, open, filled, named, crossing the corners,
along three sides, with a note, Show Center or hidden), a group's own
state and note kept, and the pieces a Scatter and an Art brush draw
along a path with and without the frame. The import fuzz test reads
brush art after frames of any corners and paint.
The legacy reader skipped `bindrepeat Tg` (section 15.3.4 of the version 7
file format specification). It now reads the binding punctuation bit:
1 and 3 set the paragraph's Burasagari to Force, and 0 and 2 set it to
none, which is VectorCraft's own mapping. The value is modal, lasts into
the next text object, and an operand other than 0 to 3 leaves it as it
was. The repeat character, `TG`, `Xu` and `Tu` are still skipped.
docs/mcp.md and the `ParaStyle::burasagari` doc comment name the legacy
`.ai` case as the exception to imported text keeping `none`.
An envelope mapped type from its laid-out box: ascent to descent for
point type, the frame for area type. The distorted glyphs then filled
less of the envelope than other art does, with room above the capitals
and below the baseline.
The envelope now maps type from the bounds of its glyph outlines,
underlines and strikethroughs when the type is on its own, in groups
and layers, or used as a clipping path. Inline graphics count by their
boxes. Rotated type and type in perspective map from their outlines as
they are drawn. Make with Mesh,
Make with Top Object and Reset with Mesh without Maintain Shape use
those bounds. Type that draws nothing keeps its laid-out box, and so
does type inside any other object, such as a blend, a repeat or a
symbol instance. Shrink Text to Fit type is measured as it is laid out
on the page.
vectorcraft-text's envelope_ink measures the type, and
register_envelope_ink registers it with the document crate. The engine
session, Renderer::new, live evaluation in vectorcraft-effects and the
.ai reader register it. The document crate keeps the measured boxes per
thread, by object and by a hash of the content, and measures again when
the type, the fonts, the hyphenation exceptions or the transform's
scale or rotation change.
This is VectorCraft's own rule. Envelopes of type made in VectorCraft
and in saved files map from the glyph outline bounds instead of the
type's laid-out box, so they redraw differently.
The page that warped type is compared with was read after the artboard
list had been moved into the document, so a file with an artboard list
fell back to its crop marks or its art's box. The page is now read
before the list is moved.
Warped type that a text variable binds stays type with the effect live,
so it keeps its binding. Before, a failed comparison replaced it with
its drawn art and the binding was skipped.
When drawn art replaces warped type with a wrap setting, the wrap shapes
are checked against the file's limit on wrap work again, so a file whose
drawn art would go past it opens from its page, as one with too many
text objects does.
A Warp on type, on the object or on one of its fills or strokes, opened
as a live effect with no check. Where the live warp draws a different
shape from the art saved in the file, the type moved and changed size.
Warped type is now compared with its saved art once it is laid out,
with the comparison and the per-file budget that envelopes use. Type
that draws as its saved art stays editable with the effect live. Other
warped type opens as that art, not as editable type, with one note that
counts them, and saving over the file asks first. The art's box goes
back into the comparison with the page. Type stays live without a
comparison when its saved art paints nothing or draws type of its own,
and in frames of threaded type.
Smooth Color now counts the steps between each pair of keys from the
keys' colors and visible bounds, which changes the step count of most
Smooth Color blends. The counts are VectorCraft's own values:
- When the keys' solid fills or strokes differ (in groups, member by
member; in text, run by run), the count is 255 times the largest
change of one channel as a fraction of its range, a half step
rounding down, from 1 to 254. An RGB channel's range is 256 values,
CMYK and gray count in percent, and two tints of one swatch by their
tints. It is at most eight per point of the largest of the keys'
widths and heights and the distance between their centers. Black to
white was 128 steps and is now 254.
- When the colors match, a solid paint meets no paint, or a key holds
a gradient or a pattern, the count is the largest distance between
corresponding visible bounding-box edges divided by the keys' mean
width or height, rounded, less one, from 1 to 1000. Two 20 pt
squares 200 pt apart were 100 steps and are now 9.
Keys without bounds make the color count when their colors differ,
and 1 step otherwise.
A blend nested in another blend's keys counts toward the step limit
by its color steps when its colors differ, and as up to 1000 steps
when they match (256 before). An outer blend of 200 steps between two
such same-color Smooth Color blends now draws 99 steps.
A Smooth Color blend in an .ai file whose drawn steps follow this rule
now opens as a live blend.
Blend Options: https://web.archive.org/web/20241217212108/https://helpx.adobe.com/illustrator/using/blending-objects.html
Docs: docs/mcp.md, docs/target-app-parity.md.
Legacy type in a composite font such as HeiseiMin-W3-83pv-RKSJ-H was
decoded one byte to a character, so Japanese, Chinese and Korean type
opened as unrelated single-byte characters, and the font name kept the
CMap.
Tf now finds a predefined CMap at the end of the font name, unless a TZ
gives the font encoding pairs, and the font is the name without it.
Strings in that font are read by the CMap's code space, mapped to CIDs
with the predefined CMaps craft-pdf carries, then to Unicode by the
character collection's CID-to-Unicode CMap. Codes the CMap doesn't map
are dropped. A -V CMap is read with its -H form's codes. Codes in the
Unicode CMaps (UCS2, UTF8, UTF16, UTF32) are read as Unicode; those
helpers follow mockydevs' #6067. A 0x0D byte ends a paragraph and a 0x09
byte is a tab in these fonts too.
The predefined CMaps craft-pdf doesn't carry (RKSJ, 78-RKSJ, 78ms-RKSJ,
78-EUC, 78, Add, Ext, NWP, GB, CNS1, KSC, B5 and the Hong Kong B5 sets
other than HKscs-B5) are read with the nearest
carried CMap, which can give a different character for some codes.
GBT, GBT-EUC, GBTpc-EUC, CNS2 and KSC-Johab type still decodes byte by
byte, with the CMap removed from the font name.
Docs: docs/file-format-parity.md.
A PDF saved with some of its artboards has a page for each of them, while
the editing data keeps them all. The importer took the pages after the
first to show the artboards right after the first page's artboard. In a
PDF of artboards 2 and 4 of 4, the second page's type went to artboard 3.
In a PDF of artboards 1 and 3 of 4, the second page's type went to the
left edge of artboard 2.
Each page after the first now goes to an artboard of its size that comes
after the previous page's artboard and leaves an artboard for each later
page. The artboard chosen for the first page also leaves one for each
later page. When several artboards fit a later page, the importer
compares their art with the page and takes the closest one, or the first
of them on a tie. It compares at most 16 artboards for all the later
pages together, the same limit it uses for the first page. A later page
with no comparisons left takes the first artboard that fits it.
When the PDF has fewer pages than artboards and its first page shows the
first artboard, the first page's type and page art still go to the art's
box or to the editing data's artboard.
Three tests failed on a loaded machine because they asserted elapsed
time. Each now counts the work that the slow behavior it guards
against would repeat, with a counter compiled only into tests:
- The CSS cascade test counts selector tests, at most two per element
(testing every rule against every element tests N x N). It styles
5,000 elements, so the slow behavior fails on the count rather than
on the hang guard, which now waits 300 s.
- The stacked-glow test counts the silhouettes drawn, 30 for 30 glows
with and without the shadow cache.
- The Zstandard frames test counts the bytes looked at to find the
zero padding.
The hang guards for invalid dash patterns, text layout and script
checks of a pipe wait 300 s instead of 20 s.
The reader holds an overflow paragraph break (`(\r) TX`) until more type
follows it. When that type came, the break took the state in force then,
not the state where the break was read:
- A story that started with the break took the `TV` direction of the
characters after it, so `1 TV (\r) TX 0 TV (Body) Tx` opened horizontal
and gave no warning.
- A break read in the other direction inside a story did not count as a
direction change.
- The empty paragraph that the break ended took the attributes of the
paragraph after it, while `(\r) Tx` keeps its own.
The pending break now records `TV` and, when it ends an empty paragraph,
that paragraph's attributes.
The fill read apart from a clipping path that was read on %_ lines, and
the copies of its subpaths, are recorded as read on those lines too, so
the copy of a look's art that is removed takes them along. The file
format notes list a compound clipping path whose subpaths paint
differently among the exceptions to a clipping path keeping its fill.
In a compound clipping path whose subpaths paint differently, the fill
of a subpath that does not clip was read apart with the clipping
subpaths' fills. Only the clipping subpaths' fills are read apart now,
and a subpath that does not clip keeps its fill, as before.
A fill read apart from a clipping path took a copy of the clipping
path's opacity mask whose art kept the original's ids, so the document
held two objects with one id. The copy of the mask's art, and the
subpaths of a fill read apart from a compound clipping path, now get
ids of their own and stay linked to the same swatches.
Each layer a multi-layer mask covers gets a copy of the mask's path, so
a fill kept on that path painted in every layer, over the art the mask
covers in the layers before. The mask's fill is read as a path of its
own again, where the mask's path is, and the copies have no fill. A
fill read apart from a compound clipping path is a compound path whose
subpaths do not clip and have ids of their own. A fill read apart, its
subpaths and their points count toward the importer's object limit.
Docs: docs/file-format-parity.md.
The reader took the fill off a clipping path in a file's editing data and
added a copy of the path, holding only that fill, under the art it clips.
A clipping path paints its own fill under the clipped art and its stroke
over it, so the reader now keeps the fill on the clipping path. A filled
clipping path opens as one path instead of two, in a clipping group, a
clipping layer and each level of nested clipping paths. Its note, tags and
gradient stroke (`1 BB`) are on that path as before.
A compound clipping path whose subpaths all paint alike keeps their fill.
When its subpaths paint differently, the fills of the filled subpaths are
still a compound path of their own under the clipped art, so a subpath
the file does not fill stays unfilled. Clipping paths in a compound path
that holds its drawn look still have their fills read as paths of their
own under the art, each with its clipping path's opacity mask.
Docs: docs/file-format-parity.md.
Each brush art section keeps only the first definition of each color name, and at most 20,000 names. The art of the brushes that come in brings at most 20,000 different color names in all, every section's color operators before any section's gradient stops, so art that no brush uses or that a later section replaces takes no places. Colors left out still count toward the color mode.
A test also checks that a global process color which only a brush's art defines with its color operator stays a process color when a gradient stop names it.
The reader kept a brush's art but dropped the colors it read from it, so
a spot color that only a Scatter or Art brush's art used made no swatch,
and the art's process colors did not count toward the document's color
mode.
The reader now keeps each brush art section's colors with its art. When
the document is finished, the colors of the art that a kept brush uses
are added after the rest of the file's, in the order the art was read:
its spot colors make swatches and its colors count toward the color
mode. Art that no kept brush uses (a pattern brush's tiles, a section
that a later one of the same name replaced, a section inside a symbol's
definition) brings none of its colors, and a spot color that the page's
art, a pattern or a symbol also defines keeps the value defined there.
Part of #637.
Stair Step's glyphs stay upright, so their matrices never show the path
turning and the spacing fit found no turn at all. The fit now takes the
path through each glyph's origin, which lies on the path, and measures
how far it turns over a step from the circle through three origins in a
row.
3D Ribbon's level baseline faces the way the path runs, so where the path
runs left its baseline and foot are turned round. The spacing fit read
that as a half turn and left the pair out, so a short run on either side
of a vertical tangent came in with no spacing. The fit now turns those
glyphs back first. With an alignment, the two glyphs either side of that
point lie on opposite sides of the path, and that pair is left out.
The spacing fitted from a type-on-a-path layout measured each turn against
the glyph's own foot. Skew's feet stay upright, so on a tilted or leftward
path the turn picked up a false angle and the fitted spacing was wrong (a
straight path at 30 degrees gave -9.7 instead of 0). Effects other than
Rainbow and 3D Ribbon now measure the turn against the baseline turned a
right angle.
The file-format doc states that a frame whose options set key 6 to true
keeps the default effect, alignment and Flip.
Type on a path from a file's text document opened as Rainbow on its
baseline, not flipped, whatever Type on a Path Options the frame kept.
Each frame now keeps its effect (Rainbow, Skew, 3D Ribbon, Stair Step,
Gravity), Align to Path (Ascender, Descender, Center, Baseline) and Flip.
A code or flag that can't be read leaves that option at its default.
Flipped type opens with the frame's path reversed once, after a copied
object takes its own art path, and an open path's end bracket stays so
the type starts where the file's range ends.
Spacing is still fitted from the file's layout. The fit now measures along
the path when Align to Path moves the baselines off it, and it follows the
glyphs' feet under 3D Ribbon, whose baselines stay level.
On a large canvas no art style is written, so the editing data holds an
object's geometry effects only as the artwork they made: the effects can
no longer be edited when the file is opened again. The warning now says
that the geometry effects are applied to the artwork and can no longer be
edited, and that the object's other effects are left out.
On a large canvas no art style is written, so objects with live effects
keep only their geometry effects in the editing data for other apps:
blurs are left out as well as shadows, glows and feathers. The warning
now says that no art styles are written and that only geometry effects
are kept.
The comment on rgb_without_cmyk in art_styles_write_the_same_bytes_again
now gives the cause of the Windows difference: the Generic CMYK
separation of the default Pink swatch, at the edge of the press gamut,
lands on C0 M93.9 Y16.3 or C0 M93.2 Y15.3 when its RGB changes in the
last float bits, and the platform's float math decides which. The
comment also says that named and spot RGB colors are not blanked.
art_styles_write_the_same_bytes_again failed on Windows (MSVC) on the
Pink swatch: the first save wrote its CMYK equivalent as 0 0.9317
0.1527 0 and the save of the reopened file as 0 0.9389 0.1629 0. The
writer computes the CMYK equivalent of an RGB color from its RGB values,
and the save of the reopened file computes it from the RGB values read
back at four decimals; for this out-of-gamut color the Generic CMYK
conversion moves by more than the test's 0.002 there. On macOS the two
saves of this document differ by at most 0.0016 in these numbers.
The test now blanks the CMYK equivalents of RGB colors (the first four
numbers of `c m y k r g b Xa` and of an RGB gradient stop's
`c m y k r g b 2 ... Bs`) and compares every other number, the RGB
values included. With them blanked, the two saves are identical on
macOS. The large-canvas test's comment also says what such objects are
written as.
On a large canvas no art style is written, so objects with live effects
are written as their vector art with their geometry effects applied, and
their shadows, glows and feathers are left out. The warning now says
that, as file-format-parity.md does, instead of "written as their drawn
look".
A symbol whose first instance is written in the drawn look of an object
with a style (through a member's scatter brush) was defined while the
look's flag was set, so the warning for the effects its art loses was
left out, and the cached definition kept it out for later instances.
The definition now writes its art with the flag cleared and restores it
afterwards.
The editing copy of a PDF-compatible .ai left out the Graphic Styles
panel's styles and objects' links to them, with a warning. They are now
written as art styles:
- The panel's styles come first in %AI9_BeginArtStyles and are listed in
its order in %AI9_BeginArtStyleList after the palette, with their
fills, strokes, transparency and effects. Fills and strokes may have
transparency and effects of their own, and a style may also hold Warp,
Transform, Free Distort, Pucker & Bloat, Twist, Zig Zag or Gaussian
Blur. A style of an object's own holds the same effects as before.
- A path, compound path or group linked to a graphic style names it when
it has the style's appearance, the style is written, and the reader
reads that style on that object. Objects linked
to a new document's styles keep their link: the panel is written for
them too.
- The writer reads each style back with the reader before it writes
it. A style with gradient or pattern fills, with anything the
reader does not read back, with a name another style has, with a name
over 1,024 bytes or past 4,096 styles is left out with a warning. Other
links are left out with a warning, and a panel with no style written
warns that it opens with a new document's styles. No graphic style is
written on a large canvas, with a warning.
Graphic styles:
https://helpx.adobe.com/illustrator/desktop/special-effects-styles/apply-graphic-styles/apply-graphic-styles.html
Tests: the round trip of the panel's styles and of links; each effect a
style can hold; the forms written; the list's limits; duplicate names; an
empty panel; links left out; a style's opacity at the written precision;
a large canvas; Twist and Transform on an object with no link; a link
to a style whose Transform moves the outline, with and without an
opacity mask; the
reader's reading of warp numbers; fuzz cases for damaged written styles.
Docs: docs/file-format-parity.md.
The editing copy of a PDF-compatible .ai wrote an object's live effects
as their result (geometry effects) or left them out (the others).
Objects with effects the .ai reader reads are now written as art styles:
- An object is written as its drawn look (a group of its vector art as
its geometry effects leave it, without shadows, glows or feathers,
with the object's transparency after it), then the object itself on
%_ lines (its points painted with nothing, or with its gradient fill
placed on the outline it draws; a group with its members), its name
and opacity mask, and
1 (style) XW naming its style.
- Styles are written in a non-printing block after the symbols, in
%AI9_BeginArtStyles: a chain of the stack of fills and strokes (with
the contents where the appearance puts them), the effects and the
object's transparency. Objects of the same appearance share a style.
- The effects written are the ones the reader reads on objects, with
their settings in the units it reads them in: Drop Shadow, Inner Glow,
Outer Glow, Feather, Round Corners, Scribble, Convert to Shape, Offset
Path, Outline Object, Outline Stroke and Pathfinder > Add.
- Each style is read back before it is written, by a new reader
function, read_art_style, which runs the reader's style parser and its
reading of a graphic style with the object's own gradient. An object
whose style reads back differently (several fills or strokes, fills
or strokes with transparency or effects of their own, pattern fills,
other effects), a filled object that fills by the even-odd rule (a
style's fill fills by the non-zero rule), a group whose effects change
its members' outlines while a member is written on another outline
(strokes as filled outlines, pattern fills as tiles, gradients that
fit their object), or one in a container whose own
effects change its members, is written as its drawn look with the
warning, and a style that is not written leaves no gradient
definition behind. Graphic styles and links to them are left out with
a warning. No art style is written on a large canvas.
Appearance attributes:
https://helpx.adobe.com/illustrator/using/appearance-attributes.html
Tests: the round trip of objects with each effect, a gradient fill, a
group with transparency and a mask, Pathfinder > Add and a hidden
effect; the same bytes on a second write; the forms written; the
objects the reader would not read; a large canvas; the warning for
graphic styles; filled even-odd objects; a gradient placed on the
outline Offset Path draws; a style that is not written; effects in a
pattern a drawn look uses; the reader's check of a style; fuzz cases
for damaged written styles.
Docs: docs/file-format-parity.md.
Key 30 of a paragraph's attributes holds its tab stops: each its position
(key 0) and alignment (key 1: 0 left, 1 center, 2 right, 3 decimal).
They were not read, so tabs fell on the default stops. At most 1,024 are
read a paragraph and 2^20 copied into a story's paragraphs, past which the
default stops apply with a warning. The fuzz test feeds hostile paragraph
attributes: alignments, auto leading, hyphenation options and tab stops.
The editing copy of a PDF-compatible .ai wrote every symbol instance as
its art. Symbols are now written as symbols, in the form the .ai reader
reads them:
- Every symbol is defined in the setup, in a non-printing block after the
patterns: %AI14_BeginSymbol, its name, its art in the symbol's own
space, its registration point as AI13PatternRegistrationType and
%AI10_EndSymbol, each after the symbols its art uses. The nine points
are numbered 1 to 9 row by row from the top left, in the order the
scripting reference lists them. A definition is written the same
wherever its first instance lies. The symbol list after the palette
keeps the Symbols panel's order. A hidden root of a symbol's art is
written shown, as the canvas draws it.
- Each instance is a /SymbolInstance with its symbol's name and the matrix
that places the art (to ten decimals), followed by its name, opacity
mask, opacity and blending mode as a group's. In a symbol's art, the
matrices of instances, gradients and images are written in the
canvas's space about the canvas point of the ruler origin.
- Pattern fills in a symbol's art are written as their tiles cut to the
shape. A symbol whose definition holds such tiles, from its own
objects, a brushed stroke's brush art, a live object, an opacity mask,
a nested symbol or an inline graphic, has its instances written as
their art.
- Instances with a fill, appearance changes, isolation, knockout or
knockout shape of their own, instances of symbols with 9-slice guides
or pattern paint, instances in pattern tiles or in art cut to a
clipping object, instances scaled almost flat, instances that turn,
mirror or scale symbols holding type, live objects, instances written
as their art, shapes with rounded live corners or strokes written as
outlines or brush art (the canvas works these out again where the
instance puts them), instances that scale their symbol more than 100
times, nested instances included (numbers are written to four
decimals), and instances on the layers of a large canvas are written
as their art (the symbols are still defined). Symbols past the 4,096
the reader keeps are left out and their instances written as art; an
instance of a symbol the document doesn't have is an empty group.
9-slice guides, export types and the dynamic type are left out, and
linked images and type in a symbol's art are embedded and written as
outlines. Each comes with a warning.
The writer takes the reader's limit of 4,096 definitions (MAX_SYMBOLS)
and its symbol_art_member check, which now are pub(crate).
The editingData option's description lists what the copy now holds,
type written as text included.
Symbols and their instances:
https://helpx.adobe.com/illustrator/desktop/manage-objects/traces-mockups-symbols/edit-symbols.htmlhttps://helpx.adobe.com/illustrator/desktop/manage-objects/traces-mockups-symbols/create-and-place-symbols.html
The nine registration points, in the order the scripting reference lists
them:
https://web.archive.org/web/20180219005134/https://wwwimages.adobe.com/content/dam/acom/en/devnet/illustrator/pdf/Illustrator-Scripting-Reference-JavaScript-cs6.pdf#page=252
Tests: the round trip of symbols, nested symbols and instances in every
state, symbols whose art is a group with a state of its own, images and
gradients in a symbol's art, every registration point, symbol names with
special characters, duplicate and missing symbols, a symbol first used
deep in opacity masks, symbols past the reader's count (one found only
while its holder's art is written included), a large canvas, symbols
with pattern fills (directly, nested, in an opacity mask, through an
inline graphic and through a brushed stroke), scaled instances of
symbols with an outside stroke, rounded live corners, type, a blend, a
tiny or thin object, an ellipse or an instance of a symbol with 9-slice
guides, a symbol whose root is hidden, instance matrices from a fixed
seed, a second write of what is read back giving the same bytes, the
forms written, the instances written as art and the options reported.
Docs: docs/file-format-parity.md, README.md, ROADMAP.md, docs/gaps.md,
docs/roadmap.md and docs/target-app-parity.md describe the editing copy
a saved .ai holds.