file.info refused a control character with one message built from an
optional suffix: "{k} has control characters" for Description and
Copyright Notice, and the same text plus " or line breaks" for the other
text fields and each keyword in a list. A catalog template cannot match an
empty final placeholder, so the multi-line form stayed in English in every
catalog, and the five catalogs with a row showed the single-line suffix in
English.
The two rules are now two complete messages with the same English text,
each with a row in every catalog that translates all status and error
messages. The old `{k} has control characters{_1}` rows in de, hi, it,
pt-br and sv are replaced.
egui places an Area by the size it had the frame before. When a family
name measured late (a face added for its script, a font found in the
background) widened the menu on the helper's last frame, that frame drew
it where the narrower menu fit, and a_menu_wider_than_its_field_stays_in_the_window
saw it 0.7 pt past the window's edge (three failed CI runs on 2026-11-13).
The helper now draws until the menu stops moving.
docs/mcp.md's line and stack row said $.stack shows at most 64 lines
and uses [global] only for the script's own code. It keeps the
innermost 64 frames after a leading line "…" when some are left out,
and [global] names any code outside a function, including code that
an included file, $.evalFile or eval runs. The row now also says how
a frame's file compares with $.fileName in each case: the same file
for code from a file, the run's name where $.fileName is empty for a
script given as source, [eval] where $.fileName is the file being run,
and [unknown] at line 0 where $.fileName is empty.
The engineName row now gives the #targetengine name, and the
script.run params text, the script module doc and the Scripts evidence
line say $.fileName is the file of the code that reads it rather than
the file being run.
Export 3D Object built every Extrude & Bevel (both kinds) and Inflate
solid twice: once for the facets that decide whether the art draws it and
count toward the object's face limit, and again for its mesh.
The solid builder now keeps the projected facets and the faces before
projection from one pass (`extrude_meshed`, `inflate_meshed`), and the
export decides and meshes each part from that one build. Where a mesh
built alone cuts Inflate's twisted sides differently (it has less room
left after keeping the faces turned away), the mesh's sides are cut with
its own room. Strokes past their limits are still left out, a fill's
error and the object's face limit still stop the export at the same
part, and the triangle budget is unchanged.
Tests compare the facets and meshes with separately built ones bit for
bit, and count one build per solid.
With the Selection tool, a change in the Character or Paragraph panel to a
selected frame of threaded text now changes every frame of its story,
locked and hidden frames included, in one undo step. Before, only the
selected frames changed.
- The panels send the frames of each selected story as the command's ids:
every Character and Paragraph field, the font family menu and its
preview, Bullets and Numbers, anti-aliasing, Variable Font axes, Reset
Panel in both panels, the Tate-chu-yoko, Warichu and Hyphenation
dialogs, and the Tabs panel's stops and Clear All Tabs. A story
selected through several frames or a group is listed once.
- The fields read every frame of the story and show a value only when all
frames share it.
- Clear All Tabs is enabled when another frame of the story has stops.
- Convert to Text keeps acting on the selected frames.
A .ai path with an Art brush opened with the brush on its stroke only
when the brush stretched its art at 100% in Tints, unflipped. Paths with
an Art brush in None, at another fixed width, with Stretch Between
Guides, or flipped along or across now open as the path with the brush
on its stroke too, and the brush in the Brushes panel has those options.
The guides come in as fractions of the art, from the lengths of the art
outside them. A brush with Scale Proportionately comes into the panel
with that option, and its paths keep their drawn look.
Paths keep their drawn look when their settings that change the drawing
differ from the brush's, and when the brush is in Tints and Shades or
Hue Shift, has a width that follows the pen, has guides that leave no
art between them, or has a Spacing, Adjustment or FoldAdjustment other
than 0, 1 and 1.
The .ai save writes the same options, so such brushes and the paths
that use them come back as they were; a path with a proportional brush
is written as its brush's art.
* PDF import: outlined Indic glyphs keep their own stroke and transparency (#5235)
Follow-up to #6906, for two review findings on how a line kept as
outlines is joined into paths:
- Glyphs were joined when their stroke widths matched; dash, cap, join
and miter limit were ignored, so a dashed glyph took the stroke of the
solid one before it. They join only when the whole stroke matches.
- Translucent glyphs were joined into one fill, where overlapping marks
paint once instead of compositing as the file draws them. Only opaque
glyphs join.
Also records the fix in the PDF row of docs/target-app-parity.md and in
docs/roadmap.md, as AGENTS.md asks.
Tests: outlined_glyphs_stroked_differently_stay_apart and
outlined_translucent_glyphs_stay_apart (both fail without the change).
* PDF import: outlined Indic glyphs under a soft mask stay apart; check kept geometry (#5235)
Review follow-ups on #6957 and #6906:
- Glyphs kept as outlines under a soft mask were joined into one path,
so the mask was applied once to all of them where the file applies it
to each glyph. They now join only when no soft mask is active.
- The fallback tests counted outline nodes only. A new test compares the
kept outlines (element count and bounding box) with the same file
opened as outlines, so a dropped or moved glyph fails it.
Tests: outlined_glyphs_under_a_soft_mask_stay_apart (fails without the
change) and kept_glyphs_are_where_the_file_draws_them.
* PDF import: mask outlined Indic glyphs one by one under a soft mask (#5235)
Review follow-up on #6957. Keeping glyphs out of one shared path was not
enough: each path still went into the soft mask's queue and
flush_masked wrapped them all in one masked group, so a mask that is not
constant was applied once to every glyph, where overlapping glyphs
composite one by one in the file.
With a soft mask active the queued art is now drained before the first
glyph and after each one, so every glyph gets a mask of its own.
Test: outlined_glyphs_under_a_varying_soft_mask_are_masked_one_by_one
checks that each outlined glyph carries its own mask (0 of 3 without
the change).
* #6957: clarify soft-mask exception in glyph grouping docs
---------
Co-authored-by: ruchirguitar <info@jeevantirth.org>
After Reset Bounding Box on a turned symbol instance, Break Link to
Symbol and Object > Expand gave the art a box turned with the instance's
transform again. The art's boxes now turn with the instance's own box,
so they stand square when the instance's box did, and the angles the
art has inside the symbol are kept relative to it. The group that an
instance's opacity, blending mode or opacity mask adds around the art
takes the instance's box angle instead of standing square to the page.
A reflected instance can hold a box 180 degrees from the box its
transform gives in one step; the art now takes the instance's box
there too, the same rectangle with its handles where the instance had
them.
Compound shapes and Pathfinder receive an instance's art through the
same rule.
The clip groups and clip paths that 9-slice guides make for gradient
and pattern art take the angle of the cell that places them, and the
outer group keeps the object's angle turned by the instance, instead
of standing square to the page. This also changes the result for an
instance that was never reset: a 20 degree sliced instance gave clip
groups at 0 degrees and now gives them at 20.
Docs: params text, docs/mcp.md, docs/target-app-parity.md.
Short of room, the Control bar drew the Fill and Stroke chips, the Stroke
link and weight field, the width profile, the Opacity field and the Graphic
Style controls past the panel menu button. Docked, the bar then left the
panel menu out; floating, it cut a control in half.
- Each of those controls now shows only while the bar has room for all of
it. The bar draws them from left to right, each only when the room left
still holds it, so the Opacity link and field can still show after a
Stroke link and weight field that did not fit.
- The Snapping menu, the selection's label, the Convert and Anchors groups,
the isolation button, Document Setup and Preferences show only while
they fit, and a group separator only while it has room.
Test: the_control_bar_s_controls_stay_inside_the_bar_in_a_narrow_window
checks widths from 150 to 1500 points, docked top and bottom and floating.
The Shape Builder had no hover_ended, so when the pointer left the canvas
(for a panel, out of the window, under a menu or dialog), the region or
stroke highlight and the Cursor Swatch Preview chips stayed where the
pointer was last seen. A map of a large selection that arrived afterwards
also highlighted the region under that old point again. When the hover
ends, the tool now drops the highlight, the stroke a click would split and
the preview, and forgets the point.
The Live Paint Selection tool had the same gap: its face or edge
highlight now goes too.
A double-click or triple-click compares the paint the face or edge had
before the first of its last clicks that painted it. A first click that
made the Live Paint group counts only when the face it filled is that
face, so clicks that move from one face to another no longer match the
paint under the first click.
With Space held for the view tools, a press, a double-click or a
triple-click with the Live Paint Bucket paints nothing.
The ui.pointer row in docs/control-protocol.md escapes the pipes in its
parameters cell, so the table keeps three columns.
The Home screen gets a Learn section between Recent Files and the new-file
presets: the Quick skill guide card, which shows the Learn panel's list of
skills (learn.skills), and each tutorial under its skill, which shows the
panel at its steps (learn.show). It works with no document open and over
open documents, opens no document and never hides the panel.
The card is shared with the panel's For you tab and now shows an outline
while it has the keyboard focus.
A graph drew its axis lines and tick marks in 0.5 pt black and a radar
graph's rings in 0.25 pt gray every time, with nothing stored for them. A
stroke, fill, weight, recolor, Appearance row, graphic style, Eyedropper
pick or opacity given to them was lost when the graph was drawn again.
- The graph now stores the rows of its axis lines and tick marks
(axisRows) and, separately, of a radar graph's rings (ringRows): the
paint, weight, opacity and blend mode of the topmost visible fill and
stroke row, their order, and the line's object opacity and blend mode.
Every line of the kind is drawn with them. Dashes, caps, joins and
arrowheads are not stored.
- These commands store a line's rows: paint.setFill, paint.setStroke,
the stroke, gradient and recolor commands, paint.swap, paint.default,
Apply Fill to Stroke and Stroke to Fill, the appearance commands with
the Eyedropper, graphic styles, transparency.set and object.setProps.
paint.setFill, paint.setStroke and the recolor commands given a whole
graph now also store what they give its lines.
- When one command reaches several lines of a kind, the frontmost line in
paint order sets what the kind keeps. A gradient is stored without its
placement.
- Lines that show their default stroke store nothing, and a global swatch
edit or a document color conversion reaches the stored paint.
Docs: docs/mcp.md, the params text of these commands,
docs/target-app-parity.md.
A command that needs a whole number of 0 or more, such as `index` of
`appearance.setItem`, `anchor` of `path.removeAnchor` and
`addon.pen.removePoint`, `sourceDocument` of `edit.dropSelection`, `index`
of `document.activate` and `to` of `document.move`, answered "missing
integer `index`" (or "missing index") both when the key was left out and
when it was given as a value that is not a whole number of 0 or more, such
as "3", 2.5, -1 or true. A value that is given but is not one is now
refused with "`index` must be a whole number", the message object ids
already use. A key left out or given as null is still missing, and an
optional index such as `subpath` keeps its default. Neither error changes
the document or records an undo step.
Docs: docs/mcp.md, docs/target-app-parity.md.
A path's own lines can be followed by samples of the pen
(`(…) Xt n XD`). The reader took them as the end of the object, so the
style marker after them was not matched: the path came in as its drawn
look plus a second, unpainted copy of the path, and no note said the
look was kept. The samples now stay with the path. They aren't read,
so a path that has them keeps its drawn look alone, with the note, when
a setting of its Calligraphic brush varies with the pen (Pressure,
Tilt, Bearing or Rotation, with a variation above 0). With any other
style, an Art brush or a Calligraphic brush that doesn't follow the
pen included, it takes the style as it would without them.
A Calligraphic brush's filter with an entry the reader doesn't know, or
with a variable width, keeps the drawn look too, as an Art brush's
filter does.
Docs: docs/file-format-parity.md, docs/gaps.md.
A straight `(N) *` guide path that runs across the canvas or an artboard
opens as a ruler guide, but a hidden one (`1 Xw`) stayed a guide path.
It now opens as a ruler guide too, and every ruler guide made from such a
path keeps the path's hide, lock and name, so its Layers row shows them.
Before, a locked guide opened unlocked and a named one lost its name.
Hidden or locked guide paths that are short, slanted, grouped or `(S) *`
stay guide paths, and commented copies (`%_`) are still left out.
Docs: docs/target-app-parity.md, docs/file-format-parity.md.
A swatch delete, Swatch Options edit, merge, Edit Color Group, Spot
Colors options change or Default Swatches replace run as a
command.batch step left the fill and stroke new art takes linked to the
old or deleted swatch, because the defaults were skipped whenever an
interaction was open. A batch step now rewrites them as the command run
on its own does; a live Swatch Options preview still leaves them alone,
and a failed batch or a canceled batch preview puts them back.
The same commands now also rewrite the fills and strokes of the
appearance new art takes, and record the change with their undo step,
so Undo and Redo put the paints for new art back with the swatches.
The graph draws the art of a column or marker design in a series again
from the design when its data, type or designs change, and an edit made
to that art is lost.
- stroke.set, stroke.weightUp, stroke.weightDown, stroke.setAdvanced,
paint.editGradient, paint.setGradientGeom, object.setOverprint,
paint.swap, paint.default, and paint.invert and paint.complement with
an item leave the art out and edit the other objects given.
- transparency.set without an item, the paint.freeform.* commands that
edit points and lines, graphicStyle.breakLink and
effect.expandAppearance are an error when all their objects are
design art. Expand Appearance is disabled for a selection of only
design art, and it leaves the design art inside a selected graph or
series group as it was.
- When the first selected object is design art, the commands do not
use the Appearance panel's active row, which is a row of that art.
- The error names the command that ran.
docs/mcp.md lists the commands. The params texts of the appearance.*
commands and graphicStyle.apply name the rule, and the Graph column
designs entry in docs/target-app-parity.md states it.
The test for a triple-click whose first click makes the group now also
builds the planar map from the same two paths and checks that the face
at the click takes its fill from the square. The doc comment of the
double-click flood names the three points it checks along each edge
segment.