The drag check took any line intersection kurbo reported, and kurbo also reports
one a tiny step before the start or after the end of a cubic. On a long curve that
step reached past the 0.0001 pt join tolerance, so a drag 0.0002 pt short of an edge
stroked it. Only intersections inside the segment count now; the checks on the
edge's ends still cover touches there.
A drag that starts with Backtick already down set the copy spacing origin at the first drag event, so a short first stretch of the drag could leave no copy. The press now sets it.
A press on an edge (Shift with Paint Fills alone, or a plain press with
Paint Strokes on) now starts a drag, as a press on a face does. The drag
paints the edge and every visible edge of the same group that it crosses
or comes within 0.0001 pt of, between pointer events and on the release,
as one undo step; Escape cancels it. Edges of other groups and hidden
edges keep their strokes, a drag over edges that already have the stroke
records no undo step, and a drag that starts on a face still fills only
faces. A double-click after such a drag joins through the edges the drag
stroked as the paint they had before it.
livePaint.strokeEdge takes the drag's points and continuation as
livePaint.fill does, and both refuse them with scope connected or
samePaint.
Help page: https://helpx.adobe.com/illustrator/desktop/paint-and-fill/learn-painting-basics/paint-with-the-live-paint-bucket-tool.html
Holding Backtick while dragging out a rectangle, rounded rectangle,
ellipse, polygon, star or line leaves a copy of the shape being drawn
each time the pointer has moved 8 screen points with the key down, up to
128 copies a drag. Each copy is its own object, drawn as the drag showed
it then. The release keeps the copies and the last shape as one undo
step, and Escape takes them all back. The spacing and the limit are
VectorCraft's own values.
The `backquote` descriptions of `pointer_gesture` name the shape tools.
Docs: docs/mcp.md, docs/target-app-parity.md.
With one radial repeat selected, the Selection tool shows a splitter on
its circle, half a step past the last instance shown. Dragging it back
around the circle hides the instances it passes, and dragging it forward
shows them again; one instance stays shown at least. The instances left
keep their places: the repeat keeps the count shown in instances and
spaces them a full circle's step apart with endAngle, and the full
circle's count is read back from that step. Each drag previews and
commits object.repeat.options as one undo step, Escape cancels it, and a
drag that ends where it began leaves no undo step. There is no splitter
when the step does not divide a full turn, for one instance to a turn or
with a radius of 0. The radius handle of a single instance sits opposite
it.
With a Constrain Angle other than 0° or a whole turn, an arc dragged out
with the Arc tool or placed from the Arc Segment Tool Options click dialog
is drawn along the turned x and y axes, with its bounding box turned. The
drag's box and Shift's equal lengths are measured along those axes, the
reference point stays at the drag's corner or the click, and F, C and
Up/Down keep the turn. At 0° and whole turns arcs are drawn as before.
shape.arc takes an optional rotation (degrees clockwise, about x1, y1 or
about the reference point x, y); a rotation that is not a number is an
error and adds nothing.
With one radial repeat selected, the Selection tool shows a handle below
it and a handle on its circle between the first two instances. Dragging
the first one down adds an instance for every 16 px and dragging it up
removes them (1 to 1,000). Dragging the second one outward or inward
makes the radius larger or smaller (0 or more); only the part of the drag
along the line from the center counts. Each drag previews and commits
object.repeat.options as one undo step, Escape cancels it, and a drag
that ends where it began leaves no undo step. The handles hide with the
edges or the bounding box and for a locked or hidden repeat, and
bounding-box handles keep priority where they meet, as with Grid Repeat.
Backspace during a press removed the vertex the press had set but left the
press marked as owning a vertex, so a dropped press then removed the vertex
before it. Removing a vertex now clears that mark.
Polygonal Lasso selects anchor points inside a loop of straight
segments. Each click sets a vertex, and a segment from the last vertex
follows the pointer. A double-click, Enter or a click on the first
vertex closes the loop. Backspace or Delete removes the last vertex,
Escape drops the loop, and Shift keeps the next segment to 45-degree
steps from the Constrain Angle. Shift held at the first click adds to
the selection and Alt subtracts from it, as with the Lasso. A loop of
fewer than three vertices selects nothing and records no undo step.
The tool is listed under its own heading in All Tools and under
Object › Plug-ins › Polygonal Lasso, with no default toolbar slot or
shortcut. On close it uses the Lasso's test for which anchor and mesh
points are inside (even-odd), now shared as lasso_select; the Lasso
itself behaves as before.
Touch mode now counts Polygonal Lasso and Enclosing Lasso as selection
tools, as it counts the Lasso, so the two-finger tap switches from them
to the drawing tool chosen last.
Fixes#4736
With Smart Guides and Snap to Tangent on, an Alt+Shift drag with the
Ellipse tool snaps the circle's radius so that the circle touches a
nearby path, when the radius comes within the snapping tolerance of that
size. The touch point is where the line from the center meets a straight
segment or a curve square, inside a segment or at an anchor where the
path runs smoothly, including an anchor where a curve's handle lies on
the anchor. A circle can touch another circle from outside or from
inside. Corners, open path ends and curves around the same center are
not offered.
The touch point shows the "tangent" label, the radius is measured along
the Constrain Angle's axes, and Space moves the circle at the size it
snapped to, which it keeps when Space is let go. When an anchor, center or crossing is near the pointer, or
the dragged corner snapped onto one, the circle is not resized. An
ellipse without Shift is not snapped. Snap to Grid and pixel snapping
place the point instead, also when turned on during the drag, and
turning Snap to Tangent off during the drag stops the snap. A press
with a small jitter is still a click rather than a drag. Each pointer move
measures at most 256 segments near that radius.
object.cropImage with ppi draws a turned or skewed image at that ppi
even when it is the image's own, instead of at the lower density of the
box around it, and a ppi over that whole box makes the new image too.
The raster size limit applies only when the crop is drawn or resampled,
so a straight cut at the image's own ppi is not refused.
The Crop Image tool's Apply sends a turned image's own resolution when
no other is set and it is within 1 to 2400 ppi, and crops over the
whole box when a resolution is chosen.
Each piece of a long drag's line also held the first segment of the next
piece, so that segment was drawn twice, once by each piece. Where the
line is thin or partly covered at its edges, the doubled coverage drew a
darker stretch every 64 segments. A piece now ends halfway along the
segment after its last point, and the next piece starts there, so a wide
line still turns at the piece's last point as one line does.
With Smart Guides and Snap to Tangent on, a Line Segment drag pressed
anywhere on a convex closed path with curves and dragged to within the
snapping tolerance of another such path lands on a common tangent of the
two. Both ends move to where the line touches the paths, the start sliding
along the first path. The line is the tangent whose touch point on the
second path is nearest the pointer, so moving the pointer around that path
switches between the outer tangent and the one crossing between the paths.
Each end shows the "tangent" label when Anchor/Path Labels is on, and the
line is drawn as a guide when Alignment Guides is on.
Before this change the start of a Line Segment drag always stayed where it
was pressed. It still does when Shift, Alt or Space is held, when an
anchor, center or crossing lies nearer the pointer than the second path,
when the press snapped to an anchor, center or crossing off the first path,
when Snap to Tangent is off, when Snap to Grid or pixel snapping places
drawn points, or when either path bends inward somewhere or has more than
512 segments.
The tangents come from the Common Tangents geometry. Each pointer move
looks at the 16 nearest closed subpaths within the snapping tolerance and
keeps the tangents of up to 64 pairs for the rest of the drag.
The line that a round Eraser, the Knife, the Path Eraser, the Pencil with
Live preview off or a smoothing drag shows was one path of every point,
copied, flattened and tessellated again each frame, and with the
Eraser's Size following the pen each step was a new path each frame.
- A drag of more than 64 segments now shows in pieces of 64 segments,
each also holding the next piece's first segment so wide lines join
as one. Pieces the drag has passed come back as the same shared path,
and the canvas reuses their triangles while the view stays the same;
only the last piece is built again, and only when it changed.
- With Size following the pen, each step is kept as its own shared path
and only a new or moved step is built.
- The Knife's pieces carry where the dash pattern starts, so the dashes
run on across pieces (Overlay::SharedPath gains `dash`).
- The smoothing band is shared until it changes.
The canvas still copies the kept triangles into each frame. Release
commands (path.eraseRegion, path.knife, path.eraseSegments,
path.freehand) are unchanged.
- Resampling at a resolution asked for weights colors by alpha in 16 bits a
channel, so a pixel with alpha 1 keeps its color instead of turning black.
- A box between pixels is drawn with the image stretched so the box fills
the whole pixels drawn; nothing past the box is squeezed into it.
- A linked W or H below a point raises both sides together, keeping the
box's proportions.
- Apply no longer clears the box and the resolution; leaving the tool does,
so a crop that fails keeps them for another try.
A click with the Ellipse tool opens a dialog with a new Anchors field
under Height, 4 by default. With 4, OK draws the same live ellipse as
before. Any other count from 2 to 1000 draws a closed plain path with
that many smooth anchors spaced evenly by angle, from the left one and
clockwise, with handles of 4/3*tan(theta/4) scaled along each axis and
the path fitted to the typed width and height. The dialog sends the
nearest whole number from 2 to 1000 (4 for an empty field or text that
is not a number). The count confirmed last is kept as the Ellipse
tool's anchors option, and the next Ellipse dialog opens on it.
shape.ellipse takes an optional anchors param (default 4). A number
that is not a whole number from 2 to 1000 gets one error naming that
range, a value that is not a number gets the usual type error, and
nothing is drawn. The MCP draw_shape tool lists anchors for ellipses.
Docs: params text, docs/mcp.md, docs/target-app-parity.md (Shapes).
With Alt held at the press, an Eraser drag draws a marquee from the press
point to the pointer instead of a stroke, and the release erases everything
inside it. Alt+Shift keeps the marquee square on its larger side, Escape
cancels it, and a click or a drag along one axis erases nothing.
path.eraseRegion takes {rect: [x, y, width, height]} in place of points.
Closed paths lose the rectangle's area; open paths are cut where they cross
its edges, found from the exact crossings, so a narrow rectangle across a
long segment still cuts it. A width or height of 0 or less, a non-finite
value, or points and rect together is an error, and nothing erased adds no
undo step.
Docs: docs/mcp.md, docs/ui-parity.md.
A step took the tip halfway between the tips at its ends, turned the
shorter way round. The release reads the pen's pressure and tilt halfway
along the step, and its bearing and rotation halfway the shorter way
round, so a step from no pressure to full pressure with the angle on
Pressure by 90° erases with a level tip there while the outline showed
it upright. Each step now takes the tip of the pen's readings halfway
along it.
A plain drag of the annotator's end handle now slides the end along the
bar's line, at least 10 px from the start, and snaps only to targets on
that line. Alt-drag moves the end freely, changing the length and angle
together, with Shift at Constrain Angle steps. A vector of no length
still moves freely.
Docs: docs/mcp.md, docs/ui-parity.md.
Hovering with the Trim at Crossings Tool draws in red the stretch a click
there would remove, on the same paths and by the same rules as the click,
and nothing over empty canvas or hidden and locked paths. A drag draws
every stretch its rectangle or freehand line would remove while it
reaches at most 32 paths. In isolation mode only paths inside the
isolated object are highlighted.
What a pick removes moves from the command into
vectorcraft_tools::addons::trim::plan, which the command and the tool
both use. A preview spends at most a twentieth of the crossing work a
click may (Work::share); past that it shows nothing, and the click or
release still removes what it reaches. The tool keeps the crossings it
found for the document as it is, so moving along one path does not
search again, and kept crossings still count against a pick's work
budget. Work::spent_since and Work::draw in vectorcraft-pathops measure
and charge that work.
Docs: docs/mcp.md, docs/ui-parity.md, docs/target-app-parity.md.
The release reads the bearing of the first point the pen leaned 1° or
more at for the points before it, while the outline kept the set value
there. The outline now takes that bearing too, and starts again when the
first lean arrives, also when a pen tilted in place at the last point
gives it.
shape.circleThroughPoints draws the circle whose edge passes through
three points, as a live ellipse with the current paint, in one undo
step. The points come from `points` or, when it is left out, from the
three selected anchor points: anchor points selected with Direct
Selection, or all the anchor points of a path selected whole. The ends
of selected segments do not count. The result gives the circle's
center and radius. The circle is not pixel-aligned, even while Align
New Objects to Pixel Grid is on, so it stays through the points.
Two points that are the same, or three on one line (twice the
triangle's area at most 1e-10 of its longest side squared), are
refused with a message and nothing is drawn. The center is computed
from the corner opposite the longest side, so nearly collinear points
and points far from the origin keep their precision.
With the Ellipse tool, the first two Shift-clicks place points and the
third draws the circle through the three. After two points the tool
previews the circle through the snapped pointer as a dashed outline;
the preview goes when the pointer leaves the canvas. Once a point is
placed, a Shift-click on the selection's handles or shape widgets
places a point too. Escape, a click without Shift, a drag, a press
without Shift on the selection or a shape widget, and an edit, Undo or
Redo made outside the tool remove the points placed so far. A
Shift-click without a drag used to open the size dialog, as a plain
click does; a plain click still opens it, and so does a Shift-click
while the perspective grid shows with an active plane, so that shape
still goes on the plane.
Docs: docs/mcp.md, ROADMAP. Messages translated in the 24 catalogs
with complete messages.
With Shift held, an Eraser drag stays on the line from the press point at
the 45 degree step from the Constrain Angle that the pointer lies nearest
to. The step is taken once the pointer is 3 screen pixels from the press
and holds until Shift is released; the tip outline follows the line.
Released, the drag goes on freehand from the last point on the line, and
Shift again takes a new step from the press point.