Reset Bounding Box set the angle to 0 on the selected objects only. A
rotation changes the box angle of the selected objects and of every
object inside them, so the members of a rotated group kept their angle:
after rotating two rectangles 20 degrees, grouping them, rotating the
group 10 degrees and resetting, Ungroup brought back a box at 30
degrees, and a second reset reported 2 objects to change.
The command now also squares every object inside the selected ones: the
children of groups, compound paths, clip groups, blends, envelopes,
repeats and intertwines, and the art of linked opacity masks. The art of
an unlinked mask does not turn with the object, so it keeps its angle.
Ungroup, Release Clipping Mask, Release Compound Path, Blend Expand,
Release Envelope, Release Repeat, Release Intertwine and Release Opacity
Mask then bring back boxes square to the page. The whole reset stays one
undo step.
Two results change. `changed` counts every object reset, the objects
inside included, so the steps above return 3 where they returned 1. A
group whose own box is square but whose members are turned used to
return 0 with no undo step; it now squares the members in one step.
Docs: params text, docs/mcp.md, docs/target-app-parity.md.
A layer nested in a group whose art was all locked counted for nothing,
so the group was hidden or locked with the layer inside it. The selected
layer now counts as selected itself.
While Lock Guides was on, a guide path that was locked itself, or sat in
a locked object, was not kept, so the group around it was hidden. Guide
paths inside locked objects are now kept too.
object.lock.unselected is now reached by its key and as a command only:
the Object > Lock > Unselected Artwork menu item is removed, and the
command stays in the registry, the shortcut editor and automation.
In a partly selected clip group or compound path it now locks the
unselected members, the clipping path included, and leaves the container
and the selected members unlocked. It locks unselected guides while Lock
Guides is on. Hidden art and art on a locked layer stay unlocked, and a
selected layer's art counts as selected.
With a selection in isolation mode the command is enabled and locks only
the unselected art inside the isolated group. The other Lock and Hide
items keep their isolation behavior.
Lock and Hide still share one selector. A lock flag on it selects the
clip group, compound path and guide cases above; Hide > Unselected
Artwork keeps its behavior, and a test covers both directions.
Docs: docs/mcp.md, docs/target-app-parity.md.
The reference app locks all deselected artwork on Cmd/Ctrl+Alt+Shift+2.
VectorCraft had no command for it: Object > Lock held Selection, All
Artwork Above and Other Layers.
The new command, object.lock.unselected (Object > Lock > Unselected
Artwork), locks in one undo step the objects that Hide > Unselected
Artwork hides: every object that Select All takes and that is neither
selected nor holds a selected object. It returns the count. Hidden
objects stay unlocked. The selection stays as it is, Unlock All unlocks
the objects again and selects them, and with nothing to lock the
command records no undo step. Both commands now share one function,
which locks or hides the objects that the existing unselected helper
returns.
In isolation mode the menu item is disabled, and the command returns
the error "not available in isolation mode" that Hide > Unselected
Artwork returns there, and changes nothing.
Docs: docs/mcp.md, docs/target-app-parity.md.
With a layer selected, Object > Hide > Unselected Artwork hid every object
on that layer, since the selected layer was dropped from the objects to
keep. The objects of a selected layer now count as selected.
While Lock Guides is on, a group that held a guide path was hidden whole,
which hid the guide with it. Guide paths now count as selected, so the
command keeps such a group visible and hides its other members one by one.
The reference app disables its Lock, Hide and Show All menus in
isolation mode. In VectorCraft every item of Object › Lock and
Object › Hide, Unlock All and Show All worked there.
In isolation mode, object.lock, object.lock.above,
object.lock.otherLayers, object.hide, object.hide.above,
object.hide.otherLayers, object.unlockAll and object.showAll are now
off. Their menu items are greyed out, and a call returns an error
that ends "exit isolation mode first". The Contextual Task Bar's
Lock button is greyed out too, and the Properties panel's Quick
Actions leave out Lock. Pattern editing mode and opacity mask editing do not count as
isolation mode for these commands. The check is outside_isolation in
cmd.rs, with has_selection_outside_isolation beside it.
Docs: docs/mcp.md, docs/target-app-parity.md.
Object › Rasterize replaced a frame of threaded text by an image of
it. The thread's re-flow then added the frame's text to the story, as
it does for a frame that was deleted, so the other frames held that
text a second time while the image drew it.
A frame that Rasterize turns into an image now leaves its thread with
the text it shows, and the other frames keep the text they hold, as
with Create Outlines and Expand. When the thread's last frame is
rasterized, the text it has no room for goes after the text of the
last frame that stays. A thread left with one frame is no longer a
thread, and undo restores the thread.
Docs: docs/mcp.md, docs/target-app-parity.md.
A save without options reuses the options the document was last saved
with in that format. Their artboard, artboards and range name artboards
by number, so once artboards were deleted or moved, the save wrote
other artboards or was refused: with three artboards, a PDF saved with
range "2" wrote the third artboard after the first was deleted, and one
saved with range "1, 3" was refused after the third was deleted. The
same held for SVG saves, a legacy .ai, and .ai and native files saved
with separateArtboards. file.formatOptions and SVG Options showed the
same numbers.
The document now keeps the ids of the artboards it had when it was
saved, and the remembered pick follows them: an artboard deleted since
is left out, one that moved is named by its new number, and the rest of
the pick is kept. A range open at its end ("2-") is written out as the
artboards it named once artboards are added. When none of the artboards
the save used is left, the pick is left out, and the save writes the
artboards it writes when none is named. A range of "all" stays as it
is. An artboard given to the save is still refused when the document
does not have it.
A new artboard no longer takes the id of an artboard deleted earlier in
the same document (Document::retire_artboard_id), or of one an undo took
away: the highest id given out is shared with the undo history, so a
new artboard is not taken for an earlier one.
file.revert keeps the pick only when the file read back has the
artboards the document had at the save, with the same ids in the same
order. A PDF saved with a range holds only those pages, and one saved
without preserveEditing reads back with new ids in page order, so their
picks are left out.
object.transformEach refused reflectX, reflectY, random and copy given
as text, but read strokes, corners, objects and patterns given as text
as the key left out. With Scale Strokes & Effects on,
{"scaleH": 200, "scaleV": 200, "strokes": "false"} scaled the stroke,
recorded an undo step and kept the params for Transform Again, which
repeated the call. artboard.rearrange, artboard.move and
artboard.duplicate read their patterns option the same way, and
artboard.setProps reads its patterns, strokes and corners options the
same way.
These commands now refuse such a value with "`<key>` must be true or
false" before they change anything. So do the other options and
numbers of artboard.setProps and artboard.move, the art of Duplicate,
Copy and Cut Artboard, the shape commands and path.create, path.close,
path.setHandle, path.moveAnchors, the Pencil, Curvature, Reshape
Segment and Blob Brush options, text.create, text.createInPath,
text.setRangeStyle, text.editRange, text.getRange, text.touchType,
text.areaOptions, type.step, the font size steps,
type.opticalMarginAlignment, type.systemLayout, type.fractionalWidths,
type.ruby, the symbol and swatch commands, the Appearance panel's
commands, the gradient and freeform gradient commands, Shape Builder,
Live Paint, Image Trace, the opacity of object.setProps, the radius,
sides and relativeRadii of object.setLiveShape, the reference point of
object.setBounds and the artboard of Align, Distribute and Distribute
Spacing. They refuse a number given as text with "`<key>` must be a
number, not <value>", and a gradient stop's tint with "stop <n>:
`tint` must be a number". A null still reads as the key left out.
Docs: docs/mcp.md, docs/target-app-parity.md.
Store corner radii as fractions of each corner's max so rounding scales with the shape; expose via Corners dialog and object.setLiveShape relativeRadii.
Co-authored-by: Cursor <cursoragent@cursor.com>
Transform Each, Rasterize, Create Object Mosaic, Create Trim Marks and
Rearrange All Artboards read their optional numbers with f64_or, which
falls back to a default for a value that is not a JSON number.
object.transformEach {"scaleH": "50"} left the selected objects at
their size and reported success. Rasterize did the same with ppi,
Create Object Mosaic did the same with width, height, spacingX and
spacingY, Create Trim Marks did the same with offset, length, bleed and
weight, and Rearrange All Artboards did the same with spacing. Crop
Image cropped to the artboard when rect was a string or another value
that is not an array.
These commands now fail with "`<key>` must be a number, not <value>"
for a value that is not a number or null, as the transform commands
do, and change nothing. Transform Each checks scaleH, scaleV, moveH,
moveV and rotate. Crop Image refuses a rect that is not an array of
four numbers with "rect must be [x, y, width, height]", the message it
already gave for an array of the wrong length; a null rect crops to the
artboard, as a missing one does.
Docs: docs/mcp.md, docs/target-app-parity.md.
Rearrange All Artboards, Select › All on Active Artboard (for objects
with no area), Copy's source artboard for Paste in Place, Align to
Artboard without an index, Crop Image, the Crop Image tool, Place with
`at`, CSS positions and a filter plug-in's artboard decided whether a
point or an object's center is on an artboard with Rect::contains,
which leaves out the right and bottom edges. A line along an artboard's right or
bottom edge was on no artboard: Rearrange left it behind, and All on
Active Artboard did not select it. Document::art_on_artboard counts
art flush with those edges (#890).
They now count the edges as art_on_artboard does, within a millionth
of a point. On an edge two artboards share, the artboard to the right
of it or below it still holds the point. All on Active Artboard
selects a line on a shared edge from either artboard. A press exactly
on a right or bottom edge now picks that artboard, and the Artboard
tool's cursor shows Move there.
Rearrange and Select › All on Active Artboard measured a symbol
instance as its transform applied to the 20 × 20 square around the
symbol's origin, not by the symbol's art. An instance whose art lies
away from that square moved with, or was selected on, the artboard
the square was on. Convert to Artboards, Transform Each, Lock and
Hide › All Artwork Above, Paste and Place from Library at a point,
and the clipboard imports measured the instance the same way, as did
Copy and Cut when they recorded the source artboard and library.add
when it sized a graphic.
These commands now measure an instance by its art through
Document::symbol_boxes, as Document::art_on_artboard, Fit to Artwork
Bounds and the Align commands do. Clipboard::bounds measures with the
symbols the clipboard holds. clipboard.exportPng, clipboard.exportPdf
and the PNG and PDF that Copy offers other apps are now cropped to
the instance's art.
Docs: docs/mcp.md.
Object > Rasterize, Crop Image, Flatten Transparency, Expand
Appearance of raster effects and Vector Halftone draw the art with the
renderer and replace it with the result. When the art held an image
that could not be decoded, the renderer drew nothing for it, and the
result lacked the image with no message. A raster export of the same
art warns that "an image couldn't be decoded and is missing from the
picture".
These five commands now compare decode_failures before and after they
draw, as raster exports do, and their replies carry that text as
`warning`. They still make their result in one undo step. The app
shows a command's `warning` in the status bar: after a menu command,
after OK in a dialog with a preview, and after a tool runs a command
(Crop Image's Apply).
Docs: docs/mcp.md (Flatten Transparency, Expand Appearance, Document
Raster Effects Settings, Vector halftone).
object.createObjectMosaic read columns and rows with as_u64 and fell
back to 10 for anything else, so 2.5, -3 or "4" made a 10 x 10 mosaic
and reported success. Transform Each read reference and seed the same
way (a reference of 2.5 used the center point, and a seed of 7.5 used
the default seed), and Rearrange All Artboards cut 1.5 columns to 1
and read "1" as the default 2.
These five parameters now take a whole number, written 4 or 4.0 as the
Rearrange All Artboards dialog sends it. A fraction or a negative
number is refused with "`columns` must be a whole number", the message
object.slice.divide gives. A string or another value that is not a
number is refused with the check_numbers error. The command then
changes nothing. The existing ranges stay: 1 to 1000 mosaic tiles
across and down, a reference of at most 8, and 1 to the artboard
count of columns.
Docs: docs/mcp.md, docs/target-app-parity.md.
Crop Image's trim (object.cropImage {trim: true}) decoded the image
within MAX_RASTER_ALLOC (2 GB) and then converted it to RGBA. The
decoder holds the decoded image, before conversion, to that allowance,
so a gray or 1-bit image within it could take up to four times as much
once converted.
Trim now reads the image's size from its header first and, when
width × height × 4 is over the allowance, fails before anything is
decoded, with the check and message Load Texture uses: "an image of
W × H pixels is too large to draw". Images within the allowance are
trimmed as before.
The Effect menu had no Rasterize. Object › Rasterize replaces the
object with an image, so its paths can no longer be edited.
Effect › Rasterize… (`rasterize`) is a live effect with Object ›
Rasterize's options: color model, resolution (the document's raster
effects resolution by default), white or transparent background,
anti-aliasing, Create Clipping Mask and Add Around Object. The canvas
draws the object as square pixels over its bounds, and its paths, type
and other art stay as they are. The effects above it in the stack,
shadows included, are part of its image, and shadows below it are cast
by the image. When Rasterize is an object's only raster effect, Expand
Appearance and PDF and SVG export give the image Object › Rasterize
gives with the same options.
Object › Rasterize now measures the art as drawn, with its geometry
effects, brush art and raster effects, so a Transform effect that moves
the art no longer leaves the image empty. Its Create Clipping Mask
clips the image to the art as drawn. The canvas no longer panics
drawing a pixel effect such as Gaussian Blur on an object about 65,500
screen pixels wide: the raster of such an object is at most 32,768
pixels a side, and the object is drawn into it at a lower resolution.
Docs: docs/mcp.md, docs/effects-parity.md, docs/target-app-parity.md,
ROADMAP.
Transform Each had Reflect X and Reflect Y swapped relative to Effect › Distort ›
Transform and the Transform panel. Properties flip buttons also used inverted
tooltips. Align them so Horizontal is left-right and Vertical is top-bottom.
Co-authored-by: Cursor <cursoragent@cursor.com>
Lock › All Artwork Above and Hide › All Artwork Above went through the
objects above each selected object in its top-level layer, one selected
object at a time. For each object they looked up in a list whether it
was selected or already found, and they computed its bounds again for
each selected object below it until one overlapped it. With 100 tiles
selected under 25,000 rectangles, a release build of vectorcraft-cli
took 6.4 s for Lock, and with all of 5,001 objects selected it took
8.8 s and locked nothing.
The commands now go through each top-level layer that holds a selected
object once, and check each object that is not selected against the
bounds of the selected objects below it. The selected objects and the
objects found are kept in sets, and each object's bounds are computed
once. The objects they lock or hide, the count, the selection and the
undo step are the same as before. On the same documents Lock now takes
under 0.1 s.
Docs: docs/target-app-parity.md.
Offset Path, Outline Stroke, the Pathfinder panel, Clean Up, Make
Blend, Rasterize and the other commands that #1429's table marks 3,
except Split Into Grid, added, removed or replaced their objects one at
a time, and so did Remove Anchor Points, Redefine Symbol and the
removal of Shaper groups whose source art is gone. Each insertion or
removal moved the later objects of the layer or group. The lookups by
id that followed walked the tree, and every fourth walk rebuilt the
lookup cache. On 25,000 rectangles a release build of vectorcraft-cli
took 29.1 s for Offset Path.
These commands now make their edits with Document::wrap,
Document::insert_beside and Document::remove_many, in one pass over the
children of each layer or group, and Outline Stroke and Expand write
each new object into the place of the object it replaces. A list that
holds an object twice, or an object and another inside it, and that was
edited without an error before, is still edited one object at a time.
The documents, selections and undo steps are the same. On the same
rectangles Offset Path now takes 1.3 s.
Docs: docs/target-app-parity.md.
Trim decoded the image with the decoder's default 512 MB allocation limit, so
a 300 ppi roll (6614 x 59055 px, 1.56 GB as RGBA) that opens fine failed with
"the image's pixels can't be read". It now decodes with the allowance opening
already has (MAX_RASTER_ALLOC: 2 GB, 512 MB on the web). A CMYK image, kept as
its ink amounts, has no alpha: trim leaves it alone (trimmed: false) instead
of failing to decode it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Rarely set fields move into one optional boxed NodeExtras, and large NodeKind payloads (images,
live shapes, blends, envelopes) are boxed. Every object, and every undo step that copies it,
shrinks: a 50k-path move keeps ~24.5 MB per step instead of ~40 MB. Files stay byte-identical
(Node keeps its flat JSON through a borrowed Serialize and a from-wire Deserialize, no flatten),
and loading is slightly faster. Undo and redo reuse their step's size estimate instead of
walking the document again (8.3 -> 5.6 ms for a 50k-path move).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VmMmc1J8XeNLxhRihWv9cc
# Conflicts:
# crates/engine/src/cmd/graph.rs
# crates/svg/src/export.rs
History was limited by step count only; a whole-selection move of 50k paths keeps ~40 MB per
step. Steps now carry a size estimate (only unshared subtrees are visited) and the oldest are
dropped beyond a byte budget, keeping the last 8. Documents entering history drop their id
index, selections are shared between steps, the command journal is bounded (held while an
Action records), and document resources are copy-on-write. Saved files are byte-identical.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VmMmc1J8XeNLxhRihWv9cc
artboard.move with moveArt (the Artboard tool's drag of one artboard or
several and, with copy, its Alt-drag), artboard.duplicate with art and
artboard.rearrange with moveArtwork moved the art, or its copies,
without their pattern tiles, whatever General › Transform Pattern Tiles
was set to. They now follow the preference as the transforms and
artboard.setProps do: with it on, pattern fills and strokes move with
the art. Each also takes a `patterns` param for one call. When the art
uses a pattern, the journal records the choice, and a recorded action
plays back with it.
Docs: docs/mcp.md (transformPatternTiles, artboard copies),
docs/target-app-parity.md.
# Conflicts:
# crates/engine/src/cmd/menucmds.rs
These commands edited the document even when nothing changed, so the
call recorded an undo step, emptied Redo and marked the document
modified:
- All Artwork Above and Other Layers (Object › Lock and
Object › Hide) with nothing to lock or hide: no object above the
selection, no other layer, or every one already locked (Lock) or
hidden (Hide).
- Transform Each with no object to transform, and without Copy when
both scales are 100% and there is no move, rotation or reflection.
- Rearrange All Artboards when no artboard moves, or with no artboard.
- stroke.widthPoint.set and stroke.widthPoint.copy when the profile
comes out as it was, and stroke.widthProfile.set with the profile the
strokes have already.
- Liquify when the stroke reshapes no path, and Puppet Warp given the
pins the art holds already (rest: true), or without rest when every
pin stays where it is and turns the art by 0° or is free.
- Define Perspective Grid with the grid the document has, Attach to
Active Plane with no object, Release with Perspective on art that is
not in perspective, Move Plane to where the plane is, without copies,
and Move Plane to Match Object when the plane is there and active
already.
- Move, Nudge and Transform in Perspective without Copy when no object
moves (1e-9 pt or less along the plane or its normal, Snap to Grid
included, or the identity), and Transform Again after one.
These commands now return without editing the document. The replies
have the same form as before. Transform Each with Copy and no object
to transform no longer empties the selection. Puppet Warp without rest,
with every pin where it is and turning the art by 0° or free, no longer
turns a live shape into a plain path. All Artwork Above still deselects
selected objects that are hidden or locked. Width Point counts a change
of 1e-9 or less in a point's place or width factor (its width over half
the stroke weight) as none. OK in Width Point Edit with the widths it
shows, with or without Adjust Adjoining Width Points, records no undo
step. After a move in perspective that moved nothing, Transform Again
repeats the identity.
One line in the evidence list of docs/target-app-parity.md names the
commands.
Every edit of an object copied its whole appearance (its fills, strokes and effects, about
540 bytes for a basic object) into the new node, though a move leaves it as it is. Over 45
whole-selection moves of 10,000 paths, undo history grew by 589 MB; now 349 MB (41 % less), and
a nudge or a drag of the selection takes 12 ms instead of 15.
- Node::appearance is a vectorcraft_doc::Shared<Appearance>: copy-on-write. A clone shares it,
and the first change through DerefMut copies it (Arc::make_mut). Reads, writes, equality (also
against a plain Appearance) and the saved form are those of the Appearance itself, so call
sites read and change it as before. Sites that build or assign a whole appearance add .into(),
and the few that need a plain copy take (*n.appearance).clone().
- Node::transform changes the appearance only when it has gradients to transform, and pattern
paints are transformed only when there are some: a move no longer copies an appearance it
doesn't change.
The workspace suite (5,301 tests) and clippy pass with the change; the doc and engine suites
pass again after the transform guard.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01VmMmc1J8XeNLxhRihWv9cc
Object › Lock › All Artwork Above and Object › Hide › All Artwork Above
lock or hide the objects that are above the selection in its layer and
overlap it. Such an object can be a group or a sublayer that holds
another selected object. The commands left that object selected, the
key object included. Align then moved the locked object, or aligned
the other selected objects to the hidden key object. object.lock and
object.hide clear the selection, and layer.setProps, which the Layers
panel's eye and lock columns run, deselects what it hides or locks.
Both commands now deselect every selected object that is locked or
hidden after the command, as layer.setProps does, and clear the key
object when it is one of them. Undo selects the objects again and
restores the key object.
Docs: the object.lock.above and object.hide.above params text,
docs/target-app-parity.md.
With every layer hidden or locked, the insertion layer fell back to the top layer anyway, so
drawing a shape, typing, pasting, making a graph, a flare, a grid, trim marks or a symbol put
the art on a hidden or locked layer: invisible, or unselectable by Select All. Illustrator
refuses to draw on a locked or hidden target layer (public forum answers, e.g.
https://community.adobe.com/t5/illustrator/can-t-draw-a-new-object-in-my-document/m-p/11107182).
DocState::target_parent is insertion_parent for new art, failing with "the target layer is
locked or hidden" when it would be a layer that isn't editable; those creation paths use it.
Another layer that is shown and unlocked still takes the art, as before. The message is in the
de, es, fr, it, ja, ru and uk catalogs. File > Place is left as it is (another branch reworks
it).
The test hides, then locks, the only layer: an ellipse, a polar grid, text and a paste each
fail with the message and leave the document unchanged; a new layer then takes a rectangle.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
# Conflicts:
# ROADMAP.md
dotCooCoo