The level a new dimension line lands on now comes from the dimension
lines in the document before the dimension's first preview, so its own
preview is never a level. A dimension drawn earlier between the same two
points now acts as a level as well; before, every dimension of those
points was skipped.
- Of two lines on one level, a line the pointer lies across wins over a
line whose end is nearer the pointer.
- A dropped press while placing removes the level guide with the
preview.
- The reach uses the Smart Guides snapping tolerance helper.
- docs/dimensions.md says the rule applies to a dimension anywhere in
the document.
- The tests are split by behavior, with new tests for the same points,
pointer moves in small steps, the guide after a dropped press and
with Alignment Guides off, and the tie-break.
The engine test now names the head each style draws (Filled a filled
triangle, Open an open triangle, Tick a slash, None no head) instead of
comparing the dimension line with ArrowStyle::arrowhead, which the
engine itself calls. It moves to crates/engine/tests/it/dimensions.rs.
The Arrow Style previews take each style from a constant list in the
order of the dropdown entries instead of parsing the entry's value
every frame, and a test checks that each entry's value matches its
style.
Part of #8049.
A linear dimension placed next to another one had its line exactly where
the pointer was. Chained dimensions only lined up when the pointer hit
the other line's level exactly, which at a normal zoom it rarely does.
- With Smart Guides on, a linear dimension placed with its line within
the Smart Guides snapping tolerance of the level of a parallel line of
a visible, unlocked linear dimension already drawn has its line on
that level. This applies to two clicked points and to a segment
dragged out.
- With Alignment Guides on, a guide runs along that level across both
lines while the dimension is placed.
- Smart Guides off, a level further off, a locked dimension or one that
is not parallel leaves the line where the pointer puts it.
Docs: docs/dimensions.md, docs/target-app-parity.md.
A PDF/X-3 or PDF/X-4 export tagged every CMYK color with an ICC-based
space of the same profile that the output intent embeds. In PDF/X-3 and PDF/X-4, CMYK colors in the
profile of a CMYK output intent are now DeviceCMYK, and the profile is
written once, as the output intent's DestOutputProfile (ISO 32000-1,
14.11.5:
https://opensource.adobe.com/dc-acrobat-sdk-docs/pdfstandards/PDF32000_2008.pdf#page=641).
- With output.profiles none and a CMYK output intent, PDF/X-3 and PDF/X-4
write every CMYK color as DeviceCMYK, unless colors are converted to a
CMYK destination of another profile, which keeps its tag. Before, those
standards tagged every color whatever profiles said.
- RGB and gray colors stay tagged, and so do CMYK colors and images in
another profile.
- A CMYK image that carries the output intent's profile is DeviceCMYK,
and so is every CMYK image when none makes CMYK colors DeviceCMYK. A
CMYK JPEG then loses its ICC_PROFILE segments.
- Transparency groups blend in DeviceCMYK when CMYK colors are
DeviceCMYK, also when the file has no ICC-based CMYK space.
- Files without a standard keep the tags that profiles asks for.
- The Save PDF dialog's note for PDF/X-3 and PDF/X-4 says that CMYK
colors in the output intent's profile are written as DeviceCMYK.
Docs: docs/mcp.md, docs/target-app-parity.md and the document.exportPdf
params text.
A Linear point picked near the end of another dimension's line landed
beside it when zoomed in: the tool's own pick skipped dimension artwork,
so that end pulled the point only within the Smart Guides tolerance,
while an anchor of the art pulls it from 8 pixels.
- With Smart Guides or Snap to Point on, a point that no anchor of the
art within 8 pixels takes lands on the end of a visible, unlocked
dimension's dimension line, or on the far end of its extension line,
within 8 pixels, with no link to that dimension. The end of an
extension line next to the point it measures is not an end, so an
anchor that a dimension already measures still takes the point.
- A point that nothing else places lands on the closest point of such
a line within 8 pixels, as it does on a segment of the art.
- With Smart Guides and Anchor/Path Labels on, a point on an anchor or
a line end shows the "anchor" label, and a point on a segment or line
shows the "path" label. A point on a line end is marked as an anchor.
- A press on a line end that moves a few pixels picks it, as a press on
an anchor does.
Docs: docs/dimensions.md, docs/target-app-parity.md.
With Smart Guides on, the Dimension tool's second point snapped onto the
construction guides through the first point (Smart Guides › Construction
Guides), so a click beside a segment straight below a first point that
was not on an anchor stayed on the vertical guide instead of landing on
the segment.
The second point now has no construction guides through a first point
that is not on an anchor. After a first point picked on an anchor, the
construction guides through it still apply. The second point still snaps
to anchors, centers and alignment lines, and with Snap to Perpendicular
or Snap to Tangent on it lands where the line from the first point meets
a segment square or grazes a curve.
Docs: docs/dimensions.md, docs/target-app-parity.md.
An unlinked aligned dimension that was reflected on its own kept its
offset, which is measured along the left normal of a to b. A reflection
turns that normal to the other side, so a line 30 pt above two level
points stayed 30 pt above them after a flip top to bottom instead of
going below them. The offset now changes sign when the transform
reverses orientation, as a reflection or a scale by a negative factor
does. Other transforms leave it as before, and linked, horizontal and
vertical dimensions keep their own rules.
Docs: docs/dimensions.md.
A dimension selected with the art it measures became a plain group of
paths and text when Object › Expand, Object › Expand Appearance or
Object › Path › Outline Stroke ran, so it no longer redrew when moved
or restyled.
These commands now leave such a dimension's lines and label as they
are, also inside selected groups without fills, strokes or effects of
their own, and change only the other art. The dimension keeps its
export assets and variable bindings. When the new art no longer fits
the dimension's link, for example because the outlined stroke has
other anchors, the dimension stays where it was, no longer linked, as
it does when its art is deleted. Undo links it again.
When the dimension is all the command would change, the command
changes nothing and reports the error it gives for a selection with
nothing to change. Object › Expand… is no longer dimmed for the label
of such a dimension. A dimension selected without the art it measures,
a part of one, and one inside a selected group with an appearance of
its own still become plain groups, and Type › Create Outlines still
outlines the label.
Docs: docs/dimensions.md, docs/mcp.md, docs/target-app-parity.md.
A linear dimension clicked from an anchor to a point that is not an
anchor (a point on a segment, or a point a Smart Guide gave) followed
the art at the anchor end only, so scaling the art turned it into a
long slanted dimension.
- A point on a segment is stored by its curve parameter on that
segment, and stays on it when the segment's anchors or handles are
edited.
- Any other point is stored against anchors (and, for a path whose
anchors lie on one line, handles) of the path under it, or of the
path at the other end, and moves, scales, turns and reflects with
that path. Beside a path whose anchors and handles all lie on one
line, such as a straight line, it keeps its distance along and
across the path: a reflection moves it as a half turn does, and a
scale that is not uniform moves it as a uniform scale does.
- When linked art is reflected, a linear dimension's line goes to the
reflected side, except for art whose anchors and handles lie on one
line.
- Deleting the art, changing its anchor count or whether it is closed,
turning an angle's arm into a curve, or making a measured circle or
arc no longer circular leaves the dimension where it was, no longer
linked, instead of removing it. Undo links it again.
Docs: docs/dimensions.md, docs/target-app-parity.md.
A linear dimension between two clicked points, or dragged out from a
segment, always measured the straight distance between its points and
drew its line parallel to them, so two points at different heights gave
only a slanted dimension. The linear dimensions help describes aligned,
horizontal and vertical linear dimensions: after the second click,
clicking again gives an aligned one and moving the pointer gives a
horizontal or vertical one.
https://helpx.adobe.com/illustrator/desktop/measure-and-align/plot-and-measure/plot-linear-dimensions-of-objects.html
While a linear dimension is being placed, the pointer's position sets
whether it is aligned, horizontal or vertical. The rule is VectorCraft's
own. With the pointer beside the two points (the nearest point of the
line through them lies between them) or on that line, the dimension is
aligned. Past either point, the line through the points and the
perpendicular through that point bound a quarter on each side of the
line. The quarter that holds the direction straight up or down gives
the horizontal distance, and the quarter that holds the direction
straight left or right gives the vertical distance. A click within
reach of the second point, or of where the pointer was for the second
click, places it aligned. Points on one horizontal or vertical line
give an aligned dimension. The dimension stays linked to the anchors it
measures.
- Dimension recipes carry an orientation (aligned by default; files
without it open as before). The line runs along the axis, and each
extension line runs from its point to it.
- dimension.create and dimension.update take orientation: aligned,
horizontal or vertical, for linear dimensions only. Any other value
is an error. A new orientation keeps the line on the side of the
points it was on, and an update that changes nothing records no
undo step.
- A horizontal or vertical dimension keeps its orientation when it or
the art it measures turns, and shows 0 when its points come into line
across its axis. A line that lay outside the points stays outside
them after a turn.
- The hint bar names the two-click placement.
Docs: docs/dimensions.md, the Evidence list in docs/target-app-parity.md.
Object > Expand left a dimension's recipe on its group, so the next move
redrew the live dimension and discarded the expanded art. Expand now ends
the live link of a dimension whose art it changes, in the same undo step.
Moving or scaling the group leaves its art as it is, the art no longer
follows what it measured, and undo gives the live dimension back.
Expand Appearance, Create Outlines and Outline Stroke had the same fault
and now do the same, also when they reach only a part of a dimension. A
dimension whose art a command leaves as it was stays live. A dimension
selected with the art it measures becomes a plain group when Expand,
Expand Appearance or Outline Stroke replaces only that art.
Picking the two points of a Linear dimension snapped to anchors and to the
line under the pointer, but showed no guides and ignored the art around it.
The picks now go through the drawing tools' Smart Guides (DrawSnap), hovering
too, so the guides show before each click: a point slides into line with other
objects' anchors and centres, and the second onto the construction guides
through the first. An anchor of the line under the pointer still wins (it
links the dimension to that path), then a guide, then the closest point of the
line (#2432). The guides go once the dimension is being placed.
Test: linear_picks_show_and_snap_to_smart_guides (fails on the old tool, which
showed no overlays while hovering). docs/dimensions.md updated.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* CI: line tables only for workspace crates, no debug info for dependencies
* CI: one integration-test binary per crate
Each crate's tests/*.rs files become modules of tests/it/main.rs. Files that change
process-wide state (Color Settings, the font database, installed plug-ins, the working
directory), the fuzz sweeps and the test targets the Affinity corpus workflow names stay
their own binaries.
* Docs: name the integration tests' new paths
* CI: xtask test with nextest and doctests, one wasm check, clippy --keep-going
cargo xtask ci runs the tests with cargo nextest (cargo test when it is not installed),
builds them with --lib --bins --tests, runs the doctests as their own step, and checks
the wasm crates in one cargo check --keep-going call.