In SVG and PDF output, each piece of a warped image whose pieces can show
through was drawn through a mask of every later piece that reaches it. On a
later piece's antialiased edge the viewer multiplies the earlier piece's
coverage by the mask and draws the later piece over it, so an image with
both opaque and partly transparent pixels came out lighter at its opaque
pixels along the triangles' edges (alpha 184 of 255 in the new SVG test).
A later piece now goes into an earlier piece's mask only when a pixel of
either piece's image within 2 pixels of their overlap is less than opaque
(vectorcraft_effects::WarpSeams). Where two pieces overlap over opaque
pixels, the later one is drawn over the earlier one without a mask.
Edit > Edit Colors > Convert to Indexed Color... (edit.colors.toIndexed)
stores the embedded images in the selection as indexed-color PNGs: a
palette of at most 256 RGB colors, each pixel the index of one. The
dialog previews live and OK is one undo step.
- The palette is chosen as for a PNG-8 export (selective, perceptual,
adaptive, web, gray, black and white), as evenly spaced levels of red,
green and blue (uniform), or from the document's swatches. Dithering
is diffusion, pattern, noise or none, with an amount.
- Pixels under half opacity become one transparent entry; the others
become opaque in their own color. Linked images, colorized images and
color glyph images keep their pixels.
- An image that is already an indexed PNG and would show the same pixels
is left as it is, and no undo step is recorded when no image changes.
- An image of more than 134,217,728 pixels (33,554,432 in the web app)
is refused, read from its header before decoding.
- With Select All, locked and hidden objects that hold an image that is
not an indexed PNG yet are counted in notChanged, without converting
them.
- The quantizer gains quantize_to, which maps pixels to a given palette.
Docs: docs/mcp.md, docs/target-app-parity.md.
An envelope or the Warp effect cuts an image into triangle pieces that
reach a little past their edges, so neighbors overlap and no seams show.
On an image with alpha, the overlap drew that alpha twice: a 50% image
came out about 75% opaque along every cell edge and diagonal.
- The pieces now form a knockout group, and each piece is marked as a
warp piece (`warp_piece`) whose knockout shape is its whole triangle,
so where pieces overlap only the top one draws.
- The canvas knocks each piece out by its triangle at full coverage.
- SVG and PDF draw the pieces of a partly transparent image (its pixels,
opacity, color mask or colorize paint) through one mask each, of the
later triangles that reach it; pixels on a triangle's antialiased edge
come out slightly lighter there. Pieces of an opaque image are drawn
one over another as before.
- SVG writes one copy of the image for pieces cut by opacity masks
(Preserve Shape Using Transparency) too.
- A cell count past the generated-object budget makes an empty group
instead of overflowing.
Docs: docs/target-app-parity.md.
The symbol instances the picker reads now share one limit of 16,000,000
placed objects, charged through charge_symbol_art and counted as the
renderer counts them, so deeply nested or heavily repeated instances
stop there. An instance whose art would pass the limit is left out with
its own paints, as the canvas draws none of it. Pattern tiles carry the
count in and out, and their art is read one level deeper than the
object the pattern fills, so a chain of patterns shares the depth limit
with the art around it; a pattern cut short there is read again where
it is used less deep.
The pixels read inside clip groups are now tested against at most
4,000,000 clipping-path elements in all. The clipped reads of one image
share the work, a read outside clip groups keeps its own pixel budget,
and when the work left can't test a pixel of every clipped read, the
reads that fit are kept in order and the rest are left out.
ImageBlob::sample_pixels takes a pixel budget for each pick.
The Color Theme Picker button beside the Assign and Edit tabs turns on
picking from the canvas. A click takes the color palette of the object a
Selection tool click takes there, a drag takes the palette of the art
inside its marquee, and Shift adds more picks. The rows that are not
excluded take the palette as their new colors and the art previews them;
OK keeps the recolor as one undo step.
- recolor.pickTheme {picks, colors?} returns the palette of the art
picked: visible fills and strokes, gradient stops, text, mesh points,
pattern tiles, symbol art, colorize colors and image pixels. Clip
groups, clipping opacity masks and isolation mode limit it to what
shows, and it changes nothing.
- Each object read weighs the same; similar colors merge (k-means in Lab)
into at most `colors`, most used first. Image reads are bounded (65,536
pixels a pick, 1,048,576 pixels and 64 images in all), and past 4,096
distinct colors, close colors merge before clustering.
- The dialog's themePicker and themePicks fields drive it from
ui.dialog.set. A new Colors count keeps the picks.
Edit Colors > Convert to Grayscale wrote the new image as an RGBA PNG, so
a PDF wrote it as DeviceRGB, in a CMYK document too. The image is now
stored as a gray PNG, with alpha only when some pixel is not opaque. Adjust
Colors with mode gray and convert does the same.
An RGB image whose pixels are already neutral now converts, and an image
already stored as gray with no visible change is left as it is.
The mesh covers the image's rectangle with its transform kept; each point takes the average colour and opacity of the picture around it. A linked image is refused.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
rgba_within checked an image's size as RGBA against the allowance it
was given (2 GB on the desktop), then decoded the image within the
image crate's default limit of 512 MB. An image whose decoded pixels
take more than 512 MB, such as an RGBA image of 11,586 × 11,586 pixels,
was refused although the canvas draws it: the Eyedropper picked up
nothing from it, and Edit Colors, Recolor Artwork, print separations
and the color adjustment effects in export and Expand Appearance left
its pixels as they were.
The decoder's limit is now the allowance that rgba_within is given.
An image decoded as RGBA is no longer copied before it is used.
Before the Eyedropper samples an image, or Edit Colors, Recolor Artwork
or a color adjustment effect recolors an embedded one, `rgba_within` reads
the image's size from its header and checks its size as RGBA against the
allowance. The check multiplied width × height × 4 in 64 bits. A TIFF's
sides go up to 2^32 - 1 pixels, so a header of 2^31 × 2^31 pixels
overflowed that product: debug and test builds panicked with "attempt to
multiply with overflow", and release builds wrapped it to 0 before the
decoder's own 512 MB limit refused the image.
The check now compares width × height with the allowance divided by 4.
Every size whose RGBA bytes fit in 64 bits gets the same answer as
before, and a larger one is refused.
The decoder's 512 MB limit is on the file's samples; a grey image within it
is four times that once converted to RGBA for the Eyedropper or a recolour,
which the web build can't allocate. The size is now read from the header and
held to the allowance the importers and the renderer use.
A linked image (`ImageObject.link`, now a LinkInfo: absolute path, path relative to the document,
size, modification time, hash, page; old path strings still load) keeps a low-resolution preview
(`ImageBlob.proxy`, at most 256 px a side) that a native save writes in place of the pixels of
images only linked images show. Opening a native document reads the linked files again, looking
for each at its path, then relative to the document and by name in its folder: missing files
show their preview, modified ones are read again only with Update Links: Automatically.
`document.open` reports `missingLinks`, `modifiedLinks` and `updatedLinks`.
links.check reports each link's status, links.update reads modified files again and
links.relink points images at another file or at same-named files in a folder (each keeps its
bounds; one undo step). In the app, a document opened without its linked files asks about each
(Replace…, Ignore, Apply to All), then offers to update modified links when the preference asks.
The renderer caches previews apart from the file's pixels; the Eyedropper samples previews in
the object's pixel space.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Double-clicking the Eyedropper opens Eyedropper Options (dialog
eyedropperOptions): raster sample size (point, 3x3, 5x5) and Picks Up /
Applies trees (transparency; focal fill colour, transparency, overprint;
focal stroke colour, transparency, overprint, weight, cap, join, miter,
dash; character and paragraph attributes). The options live in the
preferences (Prefs::eyedropper, eyedropper.setOptions, prefs key
eyedropper) and replace the earlier appearance/transparency switches.
appearance.copyFrom takes pickUp/apply overrides, reverse (Alt-click:
the selection's attributes onto the clicked object) and append
(Shift+Alt-click: add the source's fills and strokes). Type copies font,
size and paragraph attributes to type. Clicking an image samples its
pixels; sampled colours keep their colour model.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
One shared colour visitor (`colorcmds::Recolor`, used by Edit Colors, Recolor Artwork, the Blend
commands, the proxy Invert/Complement and Document Color Mode) maps solid colours, gradient stops
and text runs as before, and now also:
- gradient-mesh points (with fills); Blend grades meshes by their average and keeps their shading;
- embedded images' pixels (`includeImages?`, default on): the image becomes a recoloured copy under
a content key, the original stays for undo and other objects; linked images are left alone;
- the tiles of pattern fills and strokes (`includePatterns?`, default on): one recoloured copy per
pattern saved as a new pattern swatch ("Dots 2"), the original untouched.
Everything stays one undo step; only nodes that change are copied, in one walk of the tree.
- doc: `ImageBlob::map_rgb` (decode, map each distinct colour once, keep alpha, re-encode PNG),
`ImageBlob::content_key` (now also used by image import) and `ImageBlob::png`.
- `recolor.colors` lists mesh points and pattern tile colours too.
- patterncmds: `add_pattern` adds a pattern and its swatch (shared by Make Pattern and Save a Copy).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>