Object › Plug-ins › Cutting Tools › Banner Hems and Grommets…
(`addon.cutting.banner`) marks where a printed banner is hemmed and where
its grommets go. The banner is the bounds of the selected art, or each
artboard when nothing is selected. On each chosen side the command adds a
hem line a set depth inside the edge (1 in by default) and grommet marks a
set inset inside it (0.5 in): one at each end of the side and the rest
spread evenly, as few as keep them at most a set spacing apart (24 in). A
corner that two chosen sides share gets one grommet. Each grommet mark is a
circle (27 pt by default) with a cross through its center. The marks are
stroked in a chosen swatch ([Registration] by default) with no fill, in one
group named Banner Marks per banner on top of the current layer, selected,
as one undo step. While a clip group is edited in isolation, the group goes
outside the outermost clip group, as Weed Box and Lines does.
The command refuses every side off, no hem and no grommets, and bad params
with a message. It also refuses a hem or inset that reaches the far edge of
the banner when one of two opposite sides is chosen, or that meets the marks
of the opposite side when both are chosen, an inset of more than half a
chosen side's length, and more than 100000 grommets. The dialog has Preview.
The grommets' distance from the edge is `grommetInset`, so the dialog shows
it as Grommet Inset with its own catalog rows. The new Diameter catalog
rows also translate the Diameter field of the `shape.flare` command dialog,
which had no rows.
Docs: docs/mcp.md (Cutting Tools add-on), docs/target-app-parity.md and
ROADMAP.
object.setLiveShape was in params::UNCHECKED, so a key it does not read,
such as `path`, ran the command with the key ignored. Its description
names every key it reads, so it now goes through check_keys like other
commands, for MCP, scripts and command.batch steps. Each of `items` takes
`id` and `corners` alone; another key is refused as
`items[0].corner`, with the nearest accepted key. Saved steps still
replay leniently.
A `sides` that is not a whole number from 3 to 1000 (2.5, -1, 2, 1001)
and a negative `radius` are now errors naming the key, and leave the
document and its undo history as they were; a radius of 0 still
removes rounding. The Transform panel's Sides field takes 3 to 1000,
the Corners dialog's radius field stops at 0, and the panels' corner
radius fields send 0 for a negative value typed in.
Break Text checked every thread of the document for each selected type
object to skip threaded frames, and Remove Breaks searched every thread
for each selected object to find its story, so the work grew with the
number of selected objects times the number of threaded frames.
Both commands now index the document's threads once per command: Break
Text tests membership in that index, and Remove Breaks takes the story
from the indexed thread through threads::story_in, the second half of
story_of. Split Text at Cursor, which takes one object, checks it once
as before. The results are unchanged.
Tests: Break Text on two threaded frames and six point type objects
skips the frames unchanged, breaks the rest in place as one undo step
and goes through the threads once; Remove Breaks reads the selected
story as one text and the other objects on their own, going through
the threads once; Split Text at Cursor refuses a threaded frame.
Offset Path took each selected path in turn, so offsetting many paths, or a
group of many paths, used one CPU. It now reads the selected paths first,
works out their offsets on as many threads as the computer has logical CPUs
(one thread on the web and for a single path), and then makes the new
objects one after another in the selection's order on the editing thread.
The new objects, their ids, their stacking, the selection, the messages and
the undo step are the same as before. When several paths fail, the error is
the one for the first of them in the selection's order, and the paths after
a failure that have not started yet are skipped.
Add Points and Divide into Dashes read each subpath's selected segments
with a range lookup in the path's ordered segment set instead of
filtering the whole set once per subpath. Add Points at Crossings and
Split at Crossings sort a path's crossing places into a list per
subpath once, in the order they come, instead of filtering the whole
list for every subpath. Places on a subpath that no longer exists are
still left out. The results are unchanged.
Tests cover paths with several subpaths, an empty subpath, an
untouched subpath and selection on the last subpath, for all four
commands, plus the anchor fallback and the grouping of out-of-order
crossing places.
Under a light that is not white, an opaque Inflate fill or stroke in a
solid color was drawn as one composite of all its facets, so the
object's solids were drawn whole, one after another: the stroke's faces
covered every face of the fill, nearer or not.
When an object's solids share one order (all opaque with Normal
blending, or one member's under its opacity mask), each facet of such a
solid is now drawn on its own, with the composite's paint, channel
light ramps and seam width, and takes its place in that order as the
faces of a gradient already do. A lone solid, and the solids of an
object with a translucent or blended fill or stroke, keep the one
composite.
A face drawn on its own is about 16 nodes, against about 6 per facet
in the composite of a whole surface. These faces go in one order while
they number at most 30,720 together, counted again after the cuts.
Past that, each such solid is drawn as one composite.
Docs: docs/three-d.md, docs/target-app-parity.md.
A knockout group was written as a chain of soft masks, one inside the
next for each element, so a group of about 200 elements made a PDF that
VectorCraft's own PDF import refused (form nesting past 50) and an SVG
that the web build refused as too deep.
- PDF writes a knockout group as one transparency group with /K true,
with /I true when the group isolates, and PDF import reads it back as
a knockout group. An element with several paints is drawn as one
group inside it, so its own fills and strokes do not knock each other
out.
- Where an element knocks out less than the area it paints (its opacity
or mask defines its knockout shape, or it paints translucently), each
element is drawn through one soft mask of the overlapping elements
above it. Past 65,536 objects in a group's masks, or 2,048 elements,
the group is a PDF knockout group, with a warning.
- SVG draws each element through one mask of the overlapping elements
above it, built from one shared copy of each element's shape, so the
elements stay siblings. Past 65,536 shapes in a group's masks, or
2,048 elements, the group is written as a plain group, with a warning.
Docs: docs/mcp.md, docs/target-app-parity.md.
Spot Color Objects listed every spot color linked from a gradient's stops
once any stop was above opacity 0. A spot stop at opacity 0 between other
clear stops, at the end of the ramp after a clear stop, or meeting an
opaque stop only at one offset was listed though it prints no ink, and so
was an opaque stop out of order whose pairs have no width.
A stop now counts when it bounds a stretch of some width that the
gradient sampler mixes and either stop of that stretch is above opacity
0, or when it is the first or last stop and above opacity 0, since those
color the offsets before and after the others. Stops in any order are
judged by the stretches the sampler uses. A freeform gradient keeps the
old rule, since it draws from its points. Type runs follow the same rule.
The document.info params text, docs/mcp.md and the progress line
describe it.
Live Paint Bucket Options gets a Cursor Swatch Preview checkbox (on at
first, saved with the other options). With the Bucket selected, Left and
Right set the active fill, or the stroke when the Stroke proxy is in
front, to the color swatch before or after it in the Swatches panel,
wrapping around at the ends, with the preview on or off. The selected art
keeps its paint. The preview shows the active paint above the pointer
between the swatches before and after it; a color that is no swatch shows
alone until Right picks the first swatch or Left the last, and a paint
that is not a solid color shows no chip. The chips hide during a fill
drag and while Alt samples with the eyedropper. The fill and the stroke
each remember the swatch picked for them, so swatches of the same color
are each reached in turn.
The Bucket and the Shape Builder now take the arrows for swatches only
without Shift, Alt or Cmd/Ctrl, judged by the modifiers held when the key
went down, so modified arrows keep their shortcuts
(Tool::claims_key_with, Session::tool_claims_key_with).
Docs: docs/mcp.md, docs/target-app-parity.md, tool.options params text.
In a PDF without a standard, the warning for a page longer than 14,400 pt
written with a UserUnit above 1 now ends with "turn on Write pages longer
than 200 in at full size in points". The warning already said that apps
ignoring UserUnit show such a page smaller; it now names the Save PDF
option that writes the page at its size in points instead. PDF/A files,
which keep the UserUnit with the option on, and .ai saves, whose options
do not have it, keep the warning as it was.
The longer message has a row in every complete-message catalog. The
params text of document.exportPdf, docs/mcp.md and the evidence line in
docs/target-app-parity.md describe it.
object.distort warped the anchors of paths, groups, compound paths and
clip groups but left their bounding-box angle as it was, so a rotated
path kept its old box after a warp and an upright one stayed square to
the page however far the warp tilted it. Text, images and symbol
instances already took the angle of the warp's affine approximation.
- Each path, group, compound path and clip group now takes the angle
the warp turns its x axis to at its own center before the warp, the
members of a warped group and the art of a linked opacity mask each
at their own. An unlinked mask's art keeps its angle. Mirroring keeps
the nearer angle and a collapsing warp keeps the old one. Reset
Bounding Box squares the boxes again.
- Each subtree's bounds are measured once while it is warped.
- Corners that equal the corners of the box being warped change
nothing and add no undo step.
Docs: object.distort params text, docs/mcp.md, docs/target-app-parity.md.
When a Smooth tool drag refits the stretch at the first or last anchor
of an open path, the curve there now leaves or arrives along the
smoothed path within the tool's reach instead of along the first or
last segment, so a jagged end no longer keeps its jag. The end point
stays where it is. An end where the smoothed path turns back by 90
degrees or more keeps its segment's direction, and a stretch that ends
inside the path keeps the direction of the part outside the drag.
- pathops: SimplifyOptions gains free_start and free_end, off by
default; closed subpaths and simplify_part ignore them, so Simplify
and Object > Path > Smooth give the same output as before.
- engine: path.smoothRegion sets them for the ends of an open path
that a run's refit reaches.
Docs: docs/mcp.md, docs/target-app-parity.md.
When a drag reached the first anchor of a closed path, the smoothed path
started at the first anchor past the drag, and a drag over the whole
path could start it at a corner the refit kept. Dashes and type on the
path then started somewhere else.
The smoothed path now starts at its point nearest where the first anchor
was: at an anchor there, or at a new anchor split into the segment
there, which leaves the outline as it is. Of points equally near, the
one earliest along the path before smoothing, from its first anchor,
is used. A drag that does not reach the first anchor leaves it first,
as before.
Part of #2224.
An SVG or SVGZ writes each linked JavaScript file of SVG Interactivity
into a <script xlink:href> element as stored, so a caller with
automation read roots could read a path outside them from the exported
text. With read roots in force, an SVG or SVGZ of a document that links
such a file is now refused with "a linked JavaScript file is outside the
read roots", an error that names no file or folder. No file or folder is
written, and the document keeps the link.
- The check uses the rule document.json already applies to
svg_scripts: a relative path is taken from the document's folder, a
file: URL is a file, and another URL is not checked.
- It covers document.serialize, document.export, document.exportSelection,
document.exportForScreens and assets.export (before the folder is made
or any row is written), the SVG and SVGZ saves (also a save without a
path of a document saved as SVG), file.exportAs and the SVG Options
dialog's Show Code.
- Callers without roots, and the person at the keyboard, export the
links as stored.
Docs: docs/mcp.md, docs/target-app-parity.md.
The Smooth tool showed its own cursor with nothing selected, though a
drag then changes nothing. It now shows Not Allowed until a path it can
act on is selected (an editable path, not a guide, with three or more
anchors on one of its subpaths); a selected path anywhere on the canvas
gives the Smooth cursor wherever the pointer is.
- The Pencil with Alt key toggles to Smooth Tool on and the Blob Brush
show Not Allowed the same way when Alt gives them the Smooth tool. The
Paintbrush keeps its closing cursor, since its release with Alt closes
the stroke.
- A Smooth release, from the Smooth tool or from the Pencil, Paintbrush
or Blob Brush with Alt, sends path.smoothRegion only while such a path
is selected. With only type or other objects selected it sends no
command.
- Use Precise Cursors leaves Not Allowed as it is.
- The cursor catalog and docs/target-app-parity.md describe the rule.
The panel showed the values Document Info makes in English in every
language. It now shows the Units, the Raster Effects resolution, each
font's file, substitution and embedding permission, each image's size
and linked file, each Repeat object's kind and counts (in the
language's plural forms) and gradients named by their kind in the
interface language. Font, face, file and swatch names stay as they
are, a gradient swatch named like a kind included.
document.info keeps its English rows and adds the values the panel
builds them from: document.unitId, fontDetails, imageObjects and a
kinds list on each gradientObjects entry. Save… and Package's report
stay in English.
Several threaded-text paths in threads.rs searched a list once for each
frame, so their work grew with the product of the frame count and the
list length:
- leave_threads (Create Outlines, Expand Appearance, Rasterize, Flatten
Transparency, symbol replacement, opening with text as outlines)
searched the threads for each frame that stayed and ran continued over
that frame's whole thread again, about n^2 frame visits for a thread of
n frames. It now marks each changed thread with one continued call,
and keeps the frames that left in a map instead of a list.
- has_thread_selection (the availability of Release Selection and Remove
Threading), with_threads, keep_shown_text and cut_to_shown, release and
remove test ids against a hash set instead of a list.
- create finds the thread of each selected frame from a table built
once, and each frame still takes in the first thread not yet merged
that lists it.
- release writes each thread back at its own index instead of searching
the thread list for an equal thread.
Marks, thread membership, frame order, text and overflow are unchanged.
A 256-frame thread that loses one frame visited 65,025 frames before
this change and at most 256 now. Six tests on many threads count the set
lookups: with a list in place of the set they make 67,650 to 258,226.
Another test compares the marks with a scan of the frames before each
one.
A prefs.set step, recorded inside a command.batch or loaded from a
.vcactions file, can hold a folder preference such as scratchPrimary.
- ui.inspect under automation read roots now checks such a step's
value for {key, value} and each entry of values, also in a batch
step's commands at any depth, as written and trimmed, including bare
names, subfolders and file: URLs. An empty value and the scratch disk
choices Startup and None stay.
- Any other step text written as an absolute path or a file: URL
outside the read root is left out also when whitespace surrounds it.
- Save Actions refuses a set with a prefs.set step that holds a folder
value and names the action and the preference instead of writing the
file. An empty folder and the scratch disk choices save.
- prefs.export leaves out scratchPrimary and scratchSecondary, like the
other folder preferences. prefs.import refuses a scratch disk set to a
folder and still reads Startup, None and an empty value.
The folder list, the scratch disk choices and the folder check now live
in one place in the engine. Docs: docs/mcp.md, params text and a
progress line in docs/target-app-parity.md.
A fill or stroke row that the Appearance commands gave a graph label, its
object opacity, and the characters the Eyedropper gave it lasted only
until the graph was drawn again: the graph stored nothing for a label's
rows, and the Eyedropper's character attributes were not stored.
- The graph keeps, for value axis numbers, category labels and legend
labels, the paint, weight, opacity and blend mode of a label's topmost
visible fill and stroke row, their order and place relative to the
Characters row, and the label's object opacity and blend mode
(labelStyles valuesRows, categoriesRows, legendRows). Every label of
the kind gets those rows when the graph is drawn again, with a placed
gradient fitted to each label.
- Every appearance.* command stores them, and so do graphicStyle.apply
and redefine and the paint, stroke, gradient and transparency edits
aimed at a row, even when the label already showed them.
transparency.set without a row and object.setProps store only the
object opacity and blend mode. With several labels of a kind, the last
one edited wins.
- appearance.copyFrom onto all of a label's text stores the character
attributes it applied and, from type, the paragraph attributes; a
transparency pick stores the object opacity and blend mode, and
append stores the rows.
- paint.setFill and paint.setStroke store a character fill or stroke
only when the characters take the paint (the whole label, or all of
its text highlighted with the Type tool); aimed at a row, they store
the row.
- Document Color Mode and swatch edits reach the kept rows.
Docs: docs/mcp.md, the commands' params text, docs/target-app-parity.md.
tool.setOption for the Live Paint Bucket, the Live Paint Selection tool
and the Shape Builder used to keep the old value when a switch was not
true or false, a color could not be read or a width or gap length was
not a number, and it set the other values sent with it. It also took
the RGB of a color with an alpha part, and the Shape Builder took any
`pickColorFrom` other than `swatches` as `artwork` and any `selection`
other than `straightLine` as `freeform`.
The command now checks every value before it sets any, whether the tool
is chosen or not: a switch must be true or false, a highlight color
must be an RGB color or a layer color's name without an alpha part, a
width or gap length must be a number, `pickColorFrom` and `selection`
must be one of their names, and an option the tool does not have is an
error. The error names the option, and nothing is set or saved. A width
outside 1 to 20 and a gap length outside 0 to 72 are still clamped, and
saved settings with an invalid value still load.
Docs: docs/mcp.md, docs/target-app-parity.md.
With anchors selected and Transform Objects off (objects: false, or the
backquote key during a Scale or Reflect drag), the transform moves the
whole objects' pattern tiles, so it now acts along the turned bounding
box instead of the page axes that apply to the anchors alone.
With repeated names numbered when a brush library is read, a stroke that
names a repeated brush draws the first brush of that name, and a later
brush of the name is read as "Name 2". Three tests built a library with a
repeated name and expected the later brush:
- Document Info lists a name two stored brushes share with the first
brush's type (art), not the last one's.
- The two render memory tests add their own `Dots` scatter brush beside
the default library's `Dots`. They now remove the default `Dots` first,
so the stroke draws their brush.
- The .ai writer test that leaves out a Pattern brush "X" gets the
Calligraphic brush after it back as "X 2", the name it had in the
document.
With the selection as its scope, a fix that removes or unwraps objects
(Needless Groups, Stray Points, Empty Text and the others) kept the list
of selected objects current by searching it and splicing it once for each
object it changed. Removing many selected objects above a long run of
others took time that grew with the square of their number.
The list is now rebuilt in one walk after each pass: each changed object
gives way to what replaces it, in its place, and the others keep their
order. The objects found, the counts, the document and the undo step are
the same as before.
Empty Artboards deleted each empty artboard with its own Vec::remove and
walked every ruler guide again for each one. It now drops the empty
artboards in one walk and deletes their guides in one more. The same
artboards and guides are deleted as before.
Tests cover the order after unwrapping nested and empty groups, Fix All
reaching an unwrapped member on a later round, the rebuild itself, the
number of objects looked at for 150 and 300 removals, and the number of
walks over the artboards and guides when 40 empty artboards are deleted.
A stretch of a turned star along its own box keeps it a parametric shape;
the page-axes stretch that skews it now passes basis "page". The no-op
transform test expects the scale's journal entry to carry its basis.