alert(message[, title, errorIcon]), confirm(message[, noAsDflt, title])
and prompt(message, preset[, title]) are globals in a script run. In the
app the run waits at the call for the person's answer, spends no
instructions while it waits, and every dialog has Stop, which ends the
run and puts every document back. A run over MCP or the command line
takes its answers in order from script.run's answers, a list of
{kind, value} records; a missing, mismatched or unused answer ends the
run. The report lists each dialog with its answer in dialogs, with
dialogCount and dialogsTruncated.
The interpreter gains a host call that waits at the call for its
result, from the script's own code only; a dialog called in a callback
of a built-in, a getter or a conversion throws in the app.
Docs: docs/mcp.md, docs/target-app-parity.md.
Break Link to Symbol on a selected group selected the art of every
instance it expanded that was itself shown and unlocked, including art in
a hidden or locked group inside the selection. The art now goes into the
selection only when it and every group and layer holding it are shown and
unlocked, the check Select All uses (select::is_selectable).
A PDF, an EPS or .ai without ruler units, a raster image, a metafile, an
Affinity file or an importer plug-in's document opened (and reverted) in
points whatever the General unit was. They now open in the General unit,
as the reference app opens files that record no unit. Native, SVG and DXF
files and a .ai or EPS with %AI5_RulerUnits keep their own units. Only the
displayed units change, not the art.
A click with the Reshape tool on an anchor of a selected path makes it
the focal point, and a click on a segment adds an anchor there that
becomes the focal point. Shift-click adds an anchor or a point on a
segment to the focal points, or removes an anchor that is one already.
Each focal point shows a filled anchor square in a larger hollow one.
A drag from a focal point moves all of them; a drag from another point
moves that point alone, and Shift only keeps the drag's angle.
path.reshape takes the other focal points as focal: [[subpath,
anchor]...]. Anchors that are not direct-selected stay in place, and so
do the ends of an open path unless they are focal points. A selected
anchor between two focal points moves by the whole drag, and one
between a focal point and an anchor that stays takes u² (3 - 2u) of
the drag, as before. A closed subpath with every anchor selected moves
whole: a Reshape drag on a fully selected closed path, and path.reshape
without radius on a closed path selected whole or not selected, move
the whole path instead of a local area. With radius, only the grabbed
point's subpath changes, with the falloff as before.
- An anchor added on a segment of a partly selected path is selected,
and the selected anchors and segments after it keep their points.
- A focal pair that names no anchor is refused ("`focal` names [0, 7],
which is not an anchor of the path"), and so is focal with radius.
Docs: docs/mcp.md, docs/target-app-parity.md.
Found while testing crates/engine/src/cmd/graph/data.rs:51 (parse_csv); written by crates/doc/src/graph.rs:497 (GraphSpec::to_csv)
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Break Link to Symbol on a selected group, and Delete Symbol with its
instances expanded, turned a hidden or locked instance into visible,
unlocked art. The art now keeps the instance's hidden and locked state,
as Object > Expand does, and Break Link leaves hidden or locked art out of
the selection.
Each artboard can carry a guide label: one of the layer colors or a
custom RGB. Guides that belong to an artboard draw in its label color,
and guides without an artboard, or on an artboard without a label, keep
the guide color from the preferences. Selected guides still draw in the
selection color.
- Artboard Options has a Guide Label row (None, the layer colors with
swatches, or Custom with a color swatch).
- artboard.new and artboard.setProps take guideLabel: null, a layer
color's name, or #rrggbb. Any other value is an error. The inspect
summary lists guideLabel when one is set.
- The native format saves the label and skips it when unset; a preset
index outside the layer colors reads as no label.
- artboard.setProps no longer adds an undo step when nothing changes.
Docs: docs/mcp.md, docs/target-app-parity.md.
Part of #6435. An optional VectorCraft feature: the Preferences dialog's
Export Preferences... saves the applied preferences to a JSON file (the
web build downloads it), and Import Preferences... applies such a file and
shows the imported values. They run the new commands prefs.export {path?}
and prefs.import {path | data}.
The file holds every preference prefs.list lists and the eyedropper,
perspectiveWidget, pathfinder and glyphSnap groups, without the four
folder preferences and saved presets. prefs.import reads at most 1 MB and
checks every value first: another format, a newer version, an unknown
preference, a bad value or a folder preference is an error, and nothing
changes. It keeps the open document's units, records no undo step, and is
refused as a command.batch step. prefs.set now rejects a group value that
is not an object.
File › Scripts now lists the .js and .jsx files of the Scripts folder next
to the preferences, each named after its file without the extension, with
each subfolder as a submenu, above Check Script… and Other Script…. The
help page describes this listing:
https://helpx.adobe.com/illustrator/desktop/automate-visualize-data/automate-actions/install-and-run-scripts.html
Choosing a listed script runs it through script.run without the warning
Other Script… shows. script.listInstalled returns the same listing, and
ui.runInstalledScript {path} runs one entry.
VectorCraft's own rules: the folder is read off the UI thread when the
app starts, when its window becomes active and when the File menu of the
window's menu bar opens; only names are read; links, junctions, hidden
and system entries are left out and checked again before a run; one read
stops at 2,048 entries, 512 scripts, 128 subfolders, 4 levels or 250 ms
and the menu then notes that some scripts were not listed. Under an
automation read root, script.listInstalled and ui.menu.list leave out a
folder outside the root.
#1183 (LloydNicholson) also proposed a Scripts menu listing a folder.
Scripts write to a new Script Console with $.write(...values) and
$.writeln(...values), each value as String(value) gives it. vc.log
entries, a run's uncaught error as name:line:column: message, and a
start, end and report line for each run go there too. The report line
gives the run's time, host calls and slowest commands.
- The console keeps at most 2,048 lines and 1 MiB of text, dropping the
oldest and counting what it dropped. A line is cut at 4,096 bytes and
a script's name at 256 bytes, with a count of cut lines. Line feeds,
carriage returns and CRLF break lines; other control characters show
as Unicode Control Pictures.
- script.run's result and scriptReport gain runTimeMs, timingAvailable,
hostCallCounts, slowestCommands and the run's own console. A failed
run's report has them too.
- script.console and script.console.clear read and empty the console;
ui.copyScriptConsole {first?, last?} copies lines as the panel shows
them.
- The panel lays out only the rows in view, selects with click and
Shift-click, and has Clear, Copy Selected and Copy All. Output goes on
while it is closed, and Clear works during a run.
Docs: docs/mcp.md, docs/gaps.md, docs/roadmap.md,
docs/target-app-parity.md.
A linear dimension between two clicked points, or dragged out from a
segment, always measured the straight distance between its points and
drew its line parallel to them, so two points at different heights gave
only a slanted dimension. The linear dimensions help describes aligned,
horizontal and vertical linear dimensions: after the second click,
clicking again gives an aligned one and moving the pointer gives a
horizontal or vertical one.
https://helpx.adobe.com/illustrator/desktop/measure-and-align/plot-and-measure/plot-linear-dimensions-of-objects.html
While a linear dimension is being placed, the pointer's position sets
whether it is aligned, horizontal or vertical. The rule is VectorCraft's
own. With the pointer beside the two points (the nearest point of the
line through them lies between them) or on that line, the dimension is
aligned. Past either point, the line through the points and the
perpendicular through that point bound a quarter on each side of the
line. The quarter that holds the direction straight up or down gives
the horizontal distance, and the quarter that holds the direction
straight left or right gives the vertical distance. A click within
reach of the second point, or of where the pointer was for the second
click, places it aligned. Points on one horizontal or vertical line
give an aligned dimension. The dimension stays linked to the anchors it
measures.
- Dimension recipes carry an orientation (aligned by default; files
without it open as before). The line runs along the axis, and each
extension line runs from its point to it.
- dimension.create and dimension.update take orientation: aligned,
horizontal or vertical, for linear dimensions only. Any other value
is an error. A new orientation keeps the line on the side of the
points it was on, and an update that changes nothing records no
undo step.
- A horizontal or vertical dimension keeps its orientation when it or
the art it measures turns, and shows 0 when its points come into line
across its axis. A line that lay outside the points stays outside
them after a turn.
- The hint bar names the two-click placement.
Docs: docs/dimensions.md, the Evidence list in docs/target-app-parity.md.
Preferences > Guides & Grid gets Artboard Guides with Cmd/Ctrl + Ruler
Drag (cmdRulerDragArtboardGuides), off by default. With it on, Cmd/Ctrl
held when a drag leaves a ruler makes a guide of the active artboard,
with any tool but the Artboard tool; with the Artboard tool it makes a
canvas guide instead. The key is read when the drag starts, so letting
it go during the drag keeps the kind of guide. Such a guide shows and is
made only where it lies within the active artboard; released elsewhere,
it makes no guide and no undo step. A ruler click still makes no guide.
This is VectorCraft's own option. The documented way to limit a guide
to one artboard, dragging it out with the Artboard tool, is unchanged.
Docs: docs/mcp.md, docs/target-app-parity.md.
A Reshape drag on an open path moved only the anchors within half the
diagonal of the path's bounding box, measured along the path. On a
zigzag, a wave or a spiral that is one or two anchors, so dragging an
end moved the end and left the rest of the path where it was (#2723).
path.reshape now stretches an open path from the grabbed point to both
ends. The end anchors stay in place. Each anchor between an end and the
grabbed point takes u² (3 - 2u) of the drag, where u is its distance
from that end along the control polygon divided by the grabbed point's
distance from that end. A handle takes the share on the tangent line of
that curve at its anchor, so the handles of a smooth anchor stay in
line with it. A handle that is long beside the span takes a share below
0 or above 1.
This changes the default for every caller that leaves radius out on an
open path. A closed path still moves the anchors within half the
diagonal of its bounding box, and a call that gives radius uses that
radius on open and closed paths.
- A negative radius is refused ("`radius` must be 0 or more"). It gave
anchors beyond the radius a share above 1.
- A drag of no length on an anchor no longer records an undo step.
Docs: docs/mcp.md, docs/target-app-parity.md.
When the first object of a perspective move was not yet in perspective
and a later one was attached deeper on the same plane, Snap to Grid and
Shift read the shared offset at the later object's depth and left the
first object out of the joint bounds. The first object then moved by
that offset instead of the one under the pointer at its own depth.
The move now reads Snap to Grid and Shift with the objects that are not
in perspective attached to the active plane, as the move attaches them,
so the result matches attaching them first and then moving.
text.setStyle now reads `size` and `tracking` with `number_given` and
`length_given` from pathops.rs instead of its own copies.
Both helpers read a string only when all of it is a number, or for
`length_given` a length with a unit (`"5 mm"`). Before, `"20abc"` read
as 20, so `text.setStyle` applied a 20 pt size and Offset Path a 10 pt
offset for `"10abc"`. Such a string is now refused with "`size` must be
a number, not \"20abc\"" and the document is left as it was.
Batch with Override Export compares output names without case, so
`a.svg` and `sub/A.svg` get the Export for Screens folders `a` and
`A-2`. A source whose name without its extension is empty (` .svg`)
gets the folder `file`, and a later `file.svg` gets `file-2`. Two tests
cover these cases.
Reset Preferences put Points in Units > General, and OK sent it to
prefs.set, which also set the open document's units as an undo step.
OK after Reset now resets the General preference and leaves the
document's units as they are. Choosing a General unit after Reset, in
the dialog or with ui.dialog.set, still sets the document's units.
prefs.set takes documentUnits (default true); false makes unitsGeneral
set only the preference. Docs: params text, docs/mcp.md.
Part of #6435
object.repeat.radial, object.repeat.grid, object.repeat.mirror and
object.repeat.options, and object.pattern.make, object.pattern.edit,
object.pattern.saveCopy, pattern.options and pattern.delete, read their
params with helpers that fell back to the default for a value of the
wrong type: "instances": "8" made 8 instances whatever the text said,
"rows": "2" made 3 rows, "edit": "false" entered pattern editing mode,
and a `name` that was not a string edited the selected object's pattern.
Each such value is now an error naming the param, and the document, the
selection and the undo history stay as they were. An omitted or null
param keeps its default.
- pattern.options refuses an `overlap` that is not an object, and an
`overlap.h` other than left or right or an `overlap.v` other than top
or bottom.
- object.repeat.options refuses a `center` that is not [x, y].
- object.repeat.radial refuses a negative `radius`; it used the
automatic radius before.
- object.repeat.grid reads `rows` and `cols` as object.repeat.options
does: a fraction is cut to a whole number, within 1 to 500.
- object.repeat.options applies `brickOffset` given without `gridType`
to a brick grid, and its params text lists the key.
Docs: docs/mcp.md.
After a Scissors cut (`path.split`) the whole path stayed selected: both
pieces of an open path, or the opened path of a closed one. A Direct
Selection drag from the cut then moved every anchor, so an ellipse cut
at an anchor could not be pulled open by dragging its end.
- `path.split` selects the first anchor of the piece after the cut and
nothing else, as `path.cutAtAnchors` does: anchor 0 of an opened
closed subpath, of the new path when an open path becomes two, or of
the subpath added to a path of several subpaths.
- A Direct Selection press on anchors of a selected path that lie on top
of each other takes the selected one. It took the first in path order,
which in a path of several subpaths was the unselected end.
Docs: docs/mcp.md, docs/target-app-parity.md, the `path.split` params
text.
`text.setStyle` read `font`, `style` and `justify` with `str_param`,
`size` with `len_param` and `tracking` with `num_param`, so a value of
the wrong type was skipped: `{"size": 30, "style": ["Bold"]}` set the
size and ignored the style, and `{"font": "Inter", "size": [12]}` set
the font and ignored the size. `features` dropped an entry that was not
a string and applied the rest. `text.setRangeStyle` skipped a `font` or
`style` that was not a string, `type.ruby` skipped such a `text`,
`position` or `align`, and `text.setPathHandle` moved the out handle
for any `which` other than "in".
Each of these now returns an error that names the param, before the
command edits the document. Omitting a param or giving null keeps its
default. `size` and `leading` still take a length with a unit
("12 pt", "5 mm"), and `tracking` still takes a number written as a
string ("20").
- `text.setStyle`: `font`, `style`, `justify` (`text_param`), `size`
and `tracking` (checked reads in `typecmd.rs`), `features`.
- `text.setRangeStyle`: `font`, `style`, `features`.
- `type.ruby`: `text`, `position`, `align`.
- `text.setPathHandle`: `which` must be "in" or "out".
Docs: docs/mcp.md.
dotCooCoo