Commit Graph
13 Commits
Author SHA1 Message Date
dotCooCoo ef6d14dc22 Dimension tool: both ends of a dimension follow the art it measures
A linear dimension clicked from an anchor to a point that is not an
anchor (a point on a segment, or a point a Smart Guide gave) followed
the art at the anchor end only, so scaling the art turned it into a
long slanted dimension.

- A point on a segment is stored by its curve parameter on that
  segment, and stays on it when the segment's anchors or handles are
  edited.
- Any other point is stored against anchors (and, for a path whose
  anchors lie on one line, handles) of the path under it, or of the
  path at the other end, and moves, scales, turns and reflects with
  that path. Beside a path whose anchors and handles all lie on one
  line, such as a straight line, it keeps its distance along and
  across the path: a reflection moves it as a half turn does, and a
  scale that is not uniform moves it as a uniform scale does.
- When linked art is reflected, a linear dimension's line goes to the
  reflected side, except for art whose anchors and handles lie on one
  line.
- Deleting the art, changing its anchor count or whether it is closed,
  turning an angle's arm into a curve, or making a measured circle or
  arc no longer circular leaves the dimension where it was, no longer
  linked, instead of removing it. Undo links it again.

Docs: docs/dimensions.md, docs/target-app-parity.md.
2026-11-10 21:25:59 -08:00
dotCooCoo ed17e8fc17 Dimension tool: linear dimensions measure horizontally, vertically or aligned
A linear dimension between two clicked points, or dragged out from a
segment, always measured the straight distance between its points and
drew its line parallel to them, so two points at different heights gave
only a slanted dimension. The linear dimensions help describes aligned,
horizontal and vertical linear dimensions: after the second click,
clicking again gives an aligned one and moving the pointer gives a
horizontal or vertical one.
https://helpx.adobe.com/illustrator/desktop/measure-and-align/plot-and-measure/plot-linear-dimensions-of-objects.html

While a linear dimension is being placed, the pointer's position sets
whether it is aligned, horizontal or vertical. The rule is VectorCraft's
own. With the pointer beside the two points (the nearest point of the
line through them lies between them) or on that line, the dimension is
aligned. Past either point, the line through the points and the
perpendicular through that point bound a quarter on each side of the
line. The quarter that holds the direction straight up or down gives
the horizontal distance, and the quarter that holds the direction
straight left or right gives the vertical distance. A click within
reach of the second point, or of where the pointer was for the second
click, places it aligned. Points on one horizontal or vertical line
give an aligned dimension. The dimension stays linked to the anchors it
measures.

- Dimension recipes carry an orientation (aligned by default; files
  without it open as before). The line runs along the axis, and each
  extension line runs from its point to it.
- dimension.create and dimension.update take orientation: aligned,
  horizontal or vertical, for linear dimensions only. Any other value
  is an error. A new orientation keeps the line on the side of the
  points it was on, and an update that changes nothing records no
  undo step.
- A horizontal or vertical dimension keeps its orientation when it or
  the art it measures turns, and shows 0 when its points come into line
  across its axis. A line that lay outside the points stays outside
  them after a turn.
- The hint bar names the two-click placement.

Docs: docs/dimensions.md, the Evidence list in docs/target-app-parity.md.
2026-11-10 16:54:35 -08:00
dotCooCoo 59791c8c0f Dimension tool: a click on an anchor of any path takes that anchor
With the Linear mode, two problems kept a click on an anchor from
taking it:

- A press on an anchor that moved more than 3 pixels before the release
  dragged out the dimension of the segment under the pointer and
  committed it almost on top of the art. A press on an anchor now picks
  it unless the pointer moves past the anchor's 8-pixel reach; a longer
  drag still dimensions the segment.
- A pick linked only an anchor of the segment nearest the pointer. An
  anchor of another path near that segment, for example one inside a
  group lying just inside another object's edge, was taken at most as a
  Smart Guides point with no link, so the dimension did not follow it
  when the art changed. A pick now links the nearest anchor of any
  visible, unlocked path within reach, in groups and compound paths too.
2026-11-09 23:38:23 -08:00
dotCooCoo 38bac1114b Preview dimensions on placement press 2026-11-04 10:51:37 +07:00
dotCooCoo 4c0e0b959a Commit pending dimensions only on pointer release 2026-11-04 08:12:34 +07:00
dotCooCoo 5d0cffbba1 Canvas: a dropped press keeps what earlier clicks picked
Escape also clears state that earlier clicks set up, so taking Escape for a
dropped press lost it in five tools. Each now drops only the press:

- Blend: the object picked first and the blend being added to are put
  back as they were at the press.
- Dimension: a dropped click picks nothing, and the points or lines picked
  before stay; a dropped drag is canceled as before.
- Width: the drag ends and the width points selected at the press are
  selected again.
- Gradient: a dropped click on a freeform gradient leaves the line being
  drawn open.
- Selection: with the pointer loaded with text, a dropped press threads
  nothing and the text stays loaded; a dropped press on a port loads none.
2026-11-03 16:03:39 +07:00
vectezaandClaude Opus 5.5 1a6bc267d5 Dimension tool: Linear picks show and snap to Smart Guides
Picking the two points of a Linear dimension snapped to anchors and to the
line under the pointer, but showed no guides and ignored the art around it.
The picks now go through the drawing tools' Smart Guides (DrawSnap), hovering
too, so the guides show before each click: a point slides into line with other
objects' anchors and centres, and the second onto the construction guides
through the first. An anchor of the line under the pointer still wins (it
links the dimension to that path), then a guide, then the closest point of the
line (#2432). The guides go once the dimension is being placed.

Test: linear_picks_show_and_snap_to_smart_guides (fails on the old tool, which
showed no overlays while hovering). docs/dimensions.md updated.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-24 17:46:19 +07:00
nrq6993-a11yandCursor fd53416de3 G1: honor Show Measurement Labels on pie, corners, width, and tiling readouts
Tools that showed distance or angle overlays during drags now respect the
Units preference, consistent with shape and selection tools.

Co-authored-by: Cursor <cursoragent@cursor.com>
2026-10-20 02:23:33 +07:00
vangel76andClaude Opus 5.5 4dcd0b6caa Dimension tool: show where a Linear click snaps before the click (#2516)
The snap ring on an anchor (or a dot on a line) and the rubber band now follow the snapped point, so both measured points visibly land on anchors.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-17 13:20:26 +07:00
vangel76andClaude Opus 5.5 848e7a296a Dimension tool: a click near a line snaps the measured point onto the line (#2432)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-17 13:20:26 +07:00
vangel76andClaude Opus 5.5 6939a481a4 Dimension tool: Shift shows the constrained line while picking the second point (#2432)
The Shift click already snapped the second point to 45-degree steps, but the dashed line from the first point followed the raw pointer, so the constraint looked absent until the click.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-17 13:20:26 +07:00
Osama Amin 8aea665c4e Dimension tool: the documented gestures, arcs, picas and text positions; Properties section; review fixes
Drag out from a segment, corner, circle or arc to place a dimension; plain clicks pick two points or two lines. Radial dimensions on perfect arcs, picas, Away/Between and Left/Center/Right text placement. The Properties panel edits a selected dimension, with Apply to All (dimension.applyToAll) and Set as Default. Dimension Selected Paths, the Arc/R/Ø prefixes and the custom defaults are left out. The refresh returns at once in documents without dimensions (Document::dimensions); a linked dimension moved on its own keeps its place; modes, units, line types, arrows and text placement are enums; the tool has its own icon.
2026-10-16 01:36:24 +07:00
Osama Amin 9d813e906a Fix #1372: Dimension tool and Object > Dimensions: linked length, angle, radius and diameter annotations 2026-10-16 01:36:24 +07:00