Expand Appearance on a symbol instance with a fill tint and a color
adjustment applied the adjustment to the untinted art, so the expanded
colors differed from the canvas. The expand path now passes the tinted
instance art to adjust_in_document.
A selected segment that path.insertAnchor splits stays selected as its
two halves. The new anchor is the end both halves share, so it moves
with them, and Delete cuts both halves. docs/mcp.md and the comment on
renumber_after_insert called it a direct-selected anchor; they now
describe it as an end of the halves that moves with them.
Break Link to Symbol on an instance just placed on a locked artboard
selected nothing: the art that replaced the instance has a new id, so the
locked-artboard check did not see it as new art. The art of an instance
that was new art is now checked without the locked artboards, and the
session keeps it selected as new art. The art of an older instance on a
locked artboard, named by id, is still left out of the selection.
Before the Reshape tool had focal points it sent path.reshape without
focal or radius, and the command stretched an open path from the grabbed
point to its ends whatever the selection, and moved the anchors of a
closed path within half the diagonal of its bounding box with a
falloff. Such a step, in a saved action or a script, now moved a closed
path whole. A step without focal (or with focal null) and without
radius now plays by that earlier rule. The Reshape tool always sends
focal, an empty list included, so its drags keep the focal-point rule.
On a vertical path, an upright glyph is now placed in its column as
vertical point type places it, then the column is centered on the path.
- Its cell starts at its place on the path; it started 0.12 em earlier
with fonts whose cell top is less than a full cell above the baseline.
- A baseline shift moves it across the column instead of along the path.
- A horizontal scale widens it evenly about the column's center.
- A combining mark stays on its upright letter.
- The caret and the selection highlight span the column, half its em on
each side of the path, instead of the font's ascent and descent.
With Skew, 3D Ribbon and Stair Step on a path that runs to the left,
letters are a quarter turn counterclockwise from upright glyphs: Skew and
3D Ribbon mirror both kinds there, and Stair Step keeps letters level. The
test, the progress doc and the params text of Tate-chu-yoko Settings now
state these conditions and the block's directions on a path.
Before writing a PDF preset, ICC profile, plug-in, Color Settings,
disabled list or grants file, the store compared the new bytes with the
file already there by reading the whole file into memory, so a large file
left in the folder was read in full. The comparison now reads at most one
byte more than the new content.
path.insertAnchor (the Add Anchor Point tool, the Pen's Auto Add, the
Smart Pen's Alt-click on a segment and Alt-click with the Scissors)
added the anchor without changing the selection, so the direct-selected
anchors and selected segments after it on the subpath kept their old
numbers and the selection shifted onto the next points along. It now
renumbers them with renumber_after_insert, the helper path.reshape
uses. A selected segment that the new anchor splits stays selected as
its two halves, and the new anchor is direct-selected with them. Undo
restores the path and the selection in one step.
Docs: params text, docs/mcp.md, docs/target-app-parity.md.
Before a script runs, `script.run` reads its preprocessor lines (`#` or
`//@` at the start of a line, outside strings and comments):
- `#include` and `//@include` put another file's text in place of the
line, looked for beside the including file, then in each
`#includepath` folder, then in each `JSINCLUDE` folder. A later
`#includepath` replaces the list.
- `#script` names the run unless `name` is given; `#target` takes any
value; `#strict off` is taken. `#strict on`, `#targetengine` and
`#engine` are refused as unsupported, and any other `#name` as
unknown.
`$.evalFile(path, timeout?)` runs a file in the same global environment
and returns its last value, `$.fileName` is the file being run and
`$.includePath` the include folders.
A script run from a file reads these files only in its folder and the
folders below it. Paths with a `..` name, links or junctions that lead
out, device names, streams and network paths are refused; a script
given as text reads none. A run reads at most 64 files 16 levels deep,
32 MiB of source in all and 1,024 paths looked up. An error in an
included or evaluated file is reported at that file's line and column,
and the report's new `file` field names it.
Docs: docs/mcp.md (script.run, Script Console), docs/target-app-parity.md.
A linear dimension clicked from an anchor to a point that is not an
anchor (a point on a segment, or a point a Smart Guide gave) followed
the art at the anchor end only, so scaling the art turned it into a
long slanted dimension.
- A point on a segment is stored by its curve parameter on that
segment, and stays on it when the segment's anchors or handles are
edited.
- Any other point is stored against anchors (and, for a path whose
anchors lie on one line, handles) of the path under it, or of the
path at the other end, and moves, scales, turns and reflects with
that path. Beside a path whose anchors and handles all lie on one
line, such as a straight line, it keeps its distance along and
across the path: a reflection moves it as a half turn does, and a
scale that is not uniform moves it as a uniform scale does.
- When linked art is reflected, a linear dimension's line goes to the
reflected side, except for art whose anchors and handles lie on one
line.
- Deleting the art, changing its anchor count or whether it is closed,
turning an angle's arm into a curve, or making a measured circle or
arc no longer circular leaves the dimension where it was, no longer
linked, instead of removing it. Undo links it again.
Docs: docs/dimensions.md, docs/target-app-parity.md.
Break Link to Symbol on a selected group selected the art of every
instance it expanded that was itself shown and unlocked, including art in
a hidden or locked group inside the selection. The art now goes into the
selection only when it and every group and layer holding it are shown and
unlocked, the check Select All uses (select::is_selectable).
A PDF, an EPS or .ai without ruler units, a raster image, a metafile, an
Affinity file or an importer plug-in's document opened (and reverted) in
points whatever the General unit was. They now open in the General unit,
as the reference app opens files that record no unit. Native, SVG and DXF
files and a .ai or EPS with %AI5_RulerUnits keep their own units. Only the
displayed units change, not the art.
A click with the Reshape tool on an anchor of a selected path makes it
the focal point, and a click on a segment adds an anchor there that
becomes the focal point. Shift-click adds an anchor or a point on a
segment to the focal points, or removes an anchor that is one already.
Each focal point shows a filled anchor square in a larger hollow one.
A drag from a focal point moves all of them; a drag from another point
moves that point alone, and Shift only keeps the drag's angle.
path.reshape takes the other focal points as focal: [[subpath,
anchor]...]. Anchors that are not direct-selected stay in place, and so
do the ends of an open path unless they are focal points. A selected
anchor between two focal points moves by the whole drag, and one
between a focal point and an anchor that stays takes u² (3 - 2u) of
the drag, as before. A closed subpath with every anchor selected moves
whole: a Reshape drag on a fully selected closed path, and path.reshape
without radius on a closed path selected whole or not selected, move
the whole path instead of a local area. With radius, only the grabbed
point's subpath changes, with the falloff as before.
- An anchor added on a segment of a partly selected path is selected,
and the selected anchors and segments after it keep their points.
- A focal pair that names no anchor is refused ("`focal` names [0, 7],
which is not an anchor of the path"), and so is focal with radius.
Docs: docs/mcp.md, docs/target-app-parity.md.
Found while testing crates/engine/src/cmd/graph/data.rs:51 (parse_csv); written by crates/doc/src/graph.rs:497 (GraphSpec::to_csv)
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Break Link to Symbol on a selected group, and Delete Symbol with its
instances expanded, turned a hidden or locked instance into visible,
unlocked art. The art now keeps the instance's hidden and locked state,
as Object > Expand does, and Break Link leaves hidden or locked art out of
the selection.
Each artboard can carry a guide label: one of the layer colors or a
custom RGB. Guides that belong to an artboard draw in its label color,
and guides without an artboard, or on an artboard without a label, keep
the guide color from the preferences. Selected guides still draw in the
selection color.
- Artboard Options has a Guide Label row (None, the layer colors with
swatches, or Custom with a color swatch).
- artboard.new and artboard.setProps take guideLabel: null, a layer
color's name, or #rrggbb. Any other value is an error. The inspect
summary lists guideLabel when one is set.
- The native format saves the label and skips it when unset; a preset
index outside the layer colors reads as no label.
- artboard.setProps no longer adds an undo step when nothing changes.
Docs: docs/mcp.md, docs/target-app-parity.md.
A script renamed to its whole file name could take the label another
script kept, as with tidy.js, tidy.jsx and tidy.js.js in one folder.
The rename now repeats until no label is shared. A folder entry whose
type cannot be read now marks the listing as incomplete.
Part of #6435. An optional VectorCraft feature: the Preferences dialog's
Export Preferences... saves the applied preferences to a JSON file (the
web build downloads it), and Import Preferences... applies such a file and
shows the imported values. They run the new commands prefs.export {path?}
and prefs.import {path | data}.
The file holds every preference prefs.list lists and the eyedropper,
perspectiveWidget, pathfinder and glyphSnap groups, without the four
folder preferences and saved presets. prefs.import reads at most 1 MB and
checks every value first: another format, a newer version, an unknown
preference, a bad value or a folder preference is an error, and nothing
changes. It keeps the open document's units, records no undo step, and is
refused as a command.batch step. prefs.set now rejects a group value that
is not an object.
File › Scripts now lists the .js and .jsx files of the Scripts folder next
to the preferences, each named after its file without the extension, with
each subfolder as a submenu, above Check Script… and Other Script…. The
help page describes this listing:
https://helpx.adobe.com/illustrator/desktop/automate-visualize-data/automate-actions/install-and-run-scripts.html
Choosing a listed script runs it through script.run without the warning
Other Script… shows. script.listInstalled returns the same listing, and
ui.runInstalledScript {path} runs one entry.
VectorCraft's own rules: the folder is read off the UI thread when the
app starts, when its window becomes active and when the File menu of the
window's menu bar opens; only names are read; links, junctions, hidden
and system entries are left out and checked again before a run; one read
stops at 2,048 entries, 512 scripts, 128 subfolders, 4 levels or 250 ms
and the menu then notes that some scripts were not listed. Under an
automation read root, script.listInstalled and ui.menu.list leave out a
folder outside the root.
#1183 (LloydNicholson) also proposed a Scripts menu listing a folder.
With View > Pixel Preview on, the tools still snapped to Smart Guides
and showed their guides; only the Object Highlighting outline was
hidden. Work with Smart Guides says Smart Guides cannot be used while
Snap to Grid or Pixel Preview is on.
ViewInfo has a pixel_preview field, and Session::with_tool_cx turns
Smart Guides (and Snap to Glyph, which needs them) off in the tools'
context while it is set. VectorcraftApp::view_info passes View > Pixel
Preview. View > Smart Guides keeps its setting.
Docs: docs/target-app-parity.md.
BFlat