An Eyedropper pick that includes transparency now counts a fill or stroke
row that had paint before the pick and has none after it when it stores
the series' row opacity and blend mode on the graph, as graphic styles
already do. Before, such a pick left the opacity and blend mode another
mark of the series had stored, and the series was drawn with them again
after its data changed. A row that had no paint before the pick still
leaves the stored values as they are.
A top-object envelope gives each piece of a side a share of the content
in proportion to its control polygon's length. When anchors split a
curve without changing its shape, the pieces' polygons don't divide the
side where the curve's own parameter does, so the envelope bent its
contents differently although its outline was the same: Add Anchor
Points on a top object moved the art, and a top object whose .ai mesh
saves each side's curve split into thirds drew its type up to about
half a point off its drawn art, which follows the whole curve's
parameter.
Coons::from_top_object now checks whether a side's pieces, from corner
to corner, are all pieces of one cubic. The pieces' spans of that
curve's parameter come from the handle lengths either side of each
split, the curve from the outer ends and handles, and every piece must
lie within 0.02 pt of the curve's piece over its span (each control
point). Such a side runs along that curve, by its parameter. Any other
side keeps the polygon shares, including a side only partly made of one
curve and a smooth side drawn in many pieces that isn't one curve as a
whole. Corners found from the outline can still move when anchors are
added, as before. Gradient meshes made from a path are unchanged.
Existing top-object envelopes with such sides redraw.
a_split_curve_moves_the_top_object_share_to_its_new_anchor, which
pinned the earlier behaviour, becomes a_split_curve_keeps_the_top_object_patch.
Tests: a_split_curve_keeps_the_top_object_patch,
a_top_object_joins_a_split_curve_saved_with_rounded_coordinates,
a_top_object_keeps_smoothly_joined_curves_apart,
a_top_object_side_partly_of_one_curve_keeps_the_polygon_shares and
a_top_object_side_of_many_arcs_stays_on_them (vectorcraft-doc),
envelope_top_object_keeps_its_look_when_anchors_are_added
(vectorcraft-engine) and
a_top_object_whose_top_is_one_curve_split_in_thirds_opens_live
(vectorcraft-eps).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Control bar > Snapping > Pixel Snapping Options... opens a dialog with
three checkboxes: Snap to Pixel While Drawing, While Moving and While
Scaling. OK sets them; Cancel leaves them as they were. While View >
Snap to Pixel is off, the dialog notes that the options take effect once
it is on.
- view.snapToPixel.options {drawing?, moving?, scaling?} reads and sets
them. They are kept in the preferences as the pixelSnap group, all on
by default, so turning Snap to Pixel on behaves as before. An unknown
key or a value that is not a boolean is refused and changes nothing.
The command has a parameter schema, which raises the API level to 4.
- Drawing covers points the drawing tools place, the Knife's straight
cut, the Measure tool and the rulers' origin. Moving covers Selection
and Direct Selection moves, ruler guides, artboard moves and the
Rotate, Reflect and Shear tools' drags. Scaling covers bounding-box,
Free Transform, artboard and slice handles and the Scale tool's drag.
An edit whose option is off snaps as it does with Snap to Pixel off.
- Align New Objects to Pixel Grid and the objects' pixel-aligned
property do not depend on these options.
Docs: docs/mcp.md, docs/target-app-parity.md.
A right-click on a character style in the Libraries panel now opens Apply
Character Style, Add to Character Styles, Move to Group, Rename… and
Delete. Apply is enabled only with type selected. Opening the menu applies
nothing, and the paragraph style menu is unchanged.
- library.addToCharacterStyles adds the style to the document's character
styles without applying it, so no type needs to be selected. A document
style with the same name and attributes is reused with no undo step, and
a name taken by other attributes gets a number.
- library.renameItem renames a library item in place and keeps its group.
The name is trimmed and has 1 to 256 characters. Another item of the same
kind with that name is an error, the item's own name writes nothing, and
a rename is not a document undo step.
- library.use and library.addToCharacterStyles compare a library style
with the document's in the form the document stores it in. A whole
number size from a library file no longer adds a numbered copy.
- A character style color linked to a swatch that is not a global or spot
swatch of the document keeps the color it shows without the link.
Before, adding or applying such a style failed with "no swatch".
Help page: https://helpx.adobe.com/illustrator/desktop/design-with-text/fonts-and-scripts/add-and-use-text-and-character-styles-in-libraries.html
The Smooth tool, and an Alt smoothing drag with the Pencil, Paintbrush or
Blob Brush, now send path.smoothRegion their Fidelity divided by the zoom,
as the Pencil and the Paintbrush do since #5748. Smooth Tool Options shows
Fidelity in px. A saved Fidelity keeps its number, so it smooths as before
at 100% zoom.
path.smoothRegion now refits at tolerances from 0.05 px at the highest zoom
to 100 px at the lowest (0.000078125 to about 3195 pt) instead of clamping
to 0.05 to 100 pt, so the setting keeps scaling across the whole zoom range.
path.smoothRegion replaced the anchors of each path it smoothed but left
the selection alone, so anchor and segment refs selected with Direct
Selection still named the old indices: after a smooth that removed
anchors, a ref could point past the end of the path or at another
anchor. The edit now drops those refs for each path it changes, so the
path stays selected whole. Selected paths the drag does not change keep
their anchors, and undo restores the earlier selection.
Simplify, Object > Path > Smooth, the Smooth tool and freehand strokes
turned every refitted curve whose handles lay near its chord into a
straight line. A short curve whose end directions were off the chord
passed that test, and the anchor between it and the next curve became a
corner the path did not have: a Smooth tool drag along a line jagged by
up to 6 pt left corners of 7.7 to 40.6 degrees.
A curve now becomes a line only when the line runs within 0.5 degrees
of the directions the path arrives and leaves along. A nearly straight
piece that would turn more stays a flat curve. Convert to Straight Lines
is unchanged.
Symbol and pattern art copied in by a placement takes ids of the
document's own, so the next placement of the same file compared it with
the file's art, found the ids different and added Star 2, Dots 2 and so
on. Definitions are now compared by what their art draws, whatever its
ids. A symbol, pattern or brush whose art uses an image, symbol, pattern,
brush or swatch that comes in under another name is copied under a free
name instead of shared.
With art selected, the Edit tab shows a Prominent Colors bar under the
wheel: a part for each row in its new color, as wide as the row's share
of the art, the largest first. Dragging the edge between two parts moves
width from one to the other; when the drag ends, the rows' current
colors move toward the new widths and the art previews the result. OK
keeps the recolor as one undo step.
- recolor.weigh {map, weights?, ids?} returns each row's share of the
uses of the art's colors and, with weights, the rows with their
current colors moved: one color at a time between rows that have a
new color, while a move brings the shares nearer the weights, the
color nearest in Lab to the row it goes to first. A row keeps its
first color, the tints of one global swatch move together, colors
that stay keep their order, and the command changes nothing. A use
counts for the row recolor.apply recolors it with, and the work is
bounded at 50,000,000 color-by-row comparisons.
- The New Color Group menu beside the link button has Save All Colors
(the new colors in row order) and Save Prominent Colors (the bar's
colors in its order); each saves a color group as its own undo step.
- The dialog's weights field drives the bar from ui.dialog.set. A new
Colors count drops it.
object.mesh.movePoint and object.envelope.setMeshPoint compare a handle
end with point plus handle, the form the caller sends, so a rounding
difference in (p + v) - p no longer turns an unchanged warp into a mesh
envelope with an undo step.
The i18n test that main added for 3D refusals calls validate_three_d_at with this branch's (Option<usize>, usize) position: effect 0 of appearance item 0 is (Some(0), 0).
Adds a test with a half-transparent square that its own clip group,
its clipping layer, or two nested clipping paths together hide, so the
square no longer marks the DCS image under it.
A plain group holding just the image becomes its clip group again only
when the image takes its DCS file's clipping path. When Placement Options
clip the image, it goes into a new clip group as before, so a group the
user made around the image alone stays a plain group.
The check that decides whether a linked EPS file is DCS now gets the
file's size. When the bytes read hold the whole file, it reads them as a
full read does. A binary EPS header whose PostScript or TIFF preview ends
past the end of the file names no plates, so such a file keeps its
preview with lowResProxyEps on instead of going missing.
Validation built the Extrude & Bevel, Inflate and Rotate solids from the
stored shape, while drawing, Export 3D Object and Expand as Wireframes
build them after the geometry effects before the 3D effect. A Transform
effect with copies before Extrude & Bevel could pass the check and then
draw the source art. Validation now reshapes the object, the fill or
stroke, or a group's members with those effects first.
validate_three_d_at and validate_three_d_at_in take the effect's index
for an effect on the object too, so an edit checks the effects before
that effect, and effect.apply checks a new effect after the others.
A selected warp envelope now shows the points of its surface on a 4x4
grid (8x8 or 16x16 where 4x4 strays more than 0.1% of the warp's
diagonal from it). object.mesh.movePoint, movePoints, addLine,
deletePoint and object.envelope.setMeshPoint accept a warp: the first
edit turns it into a mesh envelope on that grid and applies the edit as
one undo step, so Undo or Escape gives the warp back with its style and
bend. An edit that moves no point leaves the warp and adds no undo
step. A warp that no such grid follows (some version 0 maps) shows no
points and its edits fail without changing anything.
movePoints and setPointColor on a gradient mesh record no undo step
when they change no point.
When a linked file lost its clipping path, the clip group holding the
image stayed as a plain group of the image. When the file had a clipping
path again, the image went into a new clip group inside that plain group,
so each round nested one more group. The plain group holding just the
image now becomes its clip group again, in the layers and in symbol,
pattern, graph design and mask art.
With the lowResProxyEps preference on, opening a document kept the saved
preview of a linked DCS file, so the link showed as EPS without its
plates. Opening now reads the first 1 MiB of each such EPS file and reads
a DCS file in full. The whole file is read only when a binary EPS header
puts the PostScript past those bytes or the header comments run past
them. Other EPS files keep their preview.
The symbol's image keeps following its DCS file's clipping path when it is
updated by the id links.list gives it, and loses that path when it is
relinked to a plain image.
After a rotation the Selection tool already shows and drags a bounding
box turned with the objects, but the Free Transform tool still used the
page-aligned box. Its handles sat on the wrong corners, a side handle
scaled along the page axes, and Perspective Distort and Free Distort
started from a box that did not match the art.
- The Free Transform tool keeps the selection's turned box for the
drag. Handles, the rotate zone and the move zone are read in its
frame; a handle scales along the selection's own sides from the
opposite handle (or the center with Alt) and snaps as the Selection
tool's does; Cmd/Ctrl on a side handle shears along that side; the
outline, handles and cursors are drawn on the turned box.
- Perspective Distort and Free Distort move the corners of the turned
box. `object.distort` takes `angle?` (degrees): `from`, or the
selection's bounds without it, is then a box in the frame turned by
that angle. Upright boxes send the same params as before.
- The Scale and Reflect tools, their dialogs and commands, and the
Transform panel's flips keep the page's axes.
Docs: docs/mcp.md, docs/target-app-parity.md.
The Character panel menu has Warichu and Warichu Settings… with Show East
Asian Options. Warichu characters are set at a percentage of their size
and stacked on 1 to 6 lines inside their line: one above the other in
horizontal type and side by side in vertical type. Warichu Settings sets
Lines, Line Gap, Scale and Alignment.
- text.setFormat and text.setRangeStyle take warichu, warichuLines,
warichuGap, warichuScale and warichuAlign; ui.warichuSettings opens
the dialog.
- A stretch of warichu characters is one block that stays whole on one
line. The canvas and every export draw the stacked lines; SVG, PDF and
the .ai writers write such type as outlines, as they do ruby. Type on a
path sets the characters at their own size.
- The attributes are saved natively, carried by character styles and
translated in every complete catalog.
Docs: docs/mcp.md, docs/type-parity.md.
A new Type preference, Show samples on white (`fontSamplesOnWhite`, off
by default), draws each family's sample in every font menu, and in
Type → Font in the in-window menu bar, in the Light brightness's text
color on a white area, in every interface brightness. A row's white
area is drawn while its sample is still rendering, and leaves 2 pt above
and below it where a highlighted row's color shows. The family names and
the rest of the menu keep the interface's colors. Preferences dims the
checkbox while Enable in-menu font previews is off.
Docs: docs/mcp.md (prefs), docs/target-app-parity.md evidence line.
The Paragraph panel's Mojikumi Set lists None, YakumonoHankaku,
GyomatsuYakumonoHankaku, GyomatsuYakumonoZenkaku and YakumonoZenkaku,
then Line-end Punctuation Half Width, and text.setFormat {mojikumi}
takes yakumonoHankaku, gyomatsuYakumonoHankaku, gyomatsuYakumonoZenkaku
and yakumonoZenkaku besides none and lineEndHalf.
The spacing of each set is VectorCraft's own rule, built on the help
page's one-line description of each set:
- YakumonoHankaku sets every bracket, comma and full stop half width,
takes a quarter em off each side of a middle dot, and puts a quarter
em between Japanese and Latin letters or digits.
- GyomatsuYakumonoHankaku keeps punctuation full width inside a line,
sets an opening bracket starting a line flush and a closing mark
ending it half width, and takes the quarter em after a middle dot
ending a line off.
- GyomatsuYakumonoZenkaku keeps punctuation full width and adds the
quarter em between Japanese and Latin text.
- YakumonoZenkaku sets characters as None does.
Both composers and vertical type measure each line as it is set. A
right-to-left paragraph, whose line ends are measured untrimmed, also
draws them untrimmed, and a right-to-left line that ends between a
Japanese and a Latin character is measured without the quarter em the
set adds there. With a Desired glyph scaling other than 100%, the
space a set takes off before an opening bracket or middle dot, and the
Japanese-Latin space recorded at a line's end, scale with the glyph.
The sets save with the document and paragraph styles; new type and
Reset Panel keep Line-end Punctuation Half Width. SVG export lays type
with middle dots out again for its positioned spans. A .ai save
reports a paragraph with one of the new sets as left out.
Docs: docs/mcp.md, docs/target-app-parity.md, docs/type-parity.md,
docs/gaps.md.
Copy now remembers the whole chain of layers around each object, not only
the name of the nearest one. With Paste Remembers Layers on:
- In the same document, art goes back into the sublayer it came from while
that sublayer exists, even after it was moved, so two sublayers of the
same name in different layers stay apart. A deleted sublayer is made
again inside the layer that held it.
- In another document, the sublayer and the layers around it are matched
by name from the top level down; of repeated names, the topmost chain
that matches the most names wins, a shown and unlocked one first. A
missing sublayer is made inside its layer, and a missing layer on top
with the sublayer inside it, in the paste's undo step.
- When the matched layer, or a layer around it, is hidden or locked, the
paste fails with "the target layer is locked or hidden" and nothing is
pasted, instead of putting art in a hidden layer or making a second
layer of the same name.
Show DCS Transparency Interactions compared full object bounds, so a
transparent object over the part of a DCS image that its clipping path
hides marked the image. Bounds are now cut to the clipping paths of the
clip groups and clipping layers that hold each object.
The series fill and stroke and the label fill and stroke a graph keeps
for its next redraw are now in the paint traversal, so Delete Pattern
and canceling a new pattern make them no paint and a Pattern Options
rename renames them. Before, a later graph.setData drew the paint of a
missing pattern again. Global swatch edits reach the same paints.
The progress-doc line now says that only canceling a new pattern clears
its paints; canceling the edit of an existing pattern puts the
definition, and after a rename the old name, back.