A clipping path that paints a fill or stroke kept the geometry effects of
those fills and strokes live, so a geometry effect on the clip group or on
a group around it reshaped the path first and the fill's or stroke's
effect applied after it, on the canvas and in export alike. Unpainted
clipping paths already applied them first.
The clipping path now becomes one path per fill and stroke with those
effects applied, as an unpainted one does, in a group marked as such
pieces (`NodeExtras::clip_pieces`, saved with the document). `clip_paint`
paints that group's fill pieces behind the clipped art and its stroke
pieces over it, as the path paints its fills and strokes, also after an
effect around it turns a piece into a compound path or puts it in a group.
The clip group's visual bounds take in the stroke pieces' width, and HP-GL
export draws the clipping path once, in its stroke pieces.
An export of a painted clipping path with such effects in a clip group
without effects of its own also keeps its fill and stroke now, where the
baked pieces painted nothing.
Each 16-bit ink sample of an opaque CMYK TIFF, chunky or planar, is
reduced to the display's 8 bits as round(s * 255 / 65535), the rescaling
the PNG specification gives (section 13.12), where it was cut to its high
byte. An ink of 200 out of 65535 showed as none, and 0x8100 showed one
level too dark. The alpha path already rounds this way. The stored image
keeps its 16-bit samples.
The writer compared the top object's patch with the one the reader makes
of the written grid on an even 9 x 9 grid of places. A split side can
change how the reader samples a short curve that falls between those
places, so a top object could be written live although the reader would
map the contents differently there.
Coons::places gives the places in u and v where the patch's sides have
points. Each side runs straight between them, so the writer now compares
the four sides of both patches at every one of those places, within a
third of the tolerance; a point inside a patch blends its sides and
corners, so the patches then lie within the tolerance everywhere.
A click on a stroke of a symbol's art where it paints past the
instance's box selects the instance; past the stroke, and in Outline
view, it does not. The progress line names the new test.
Pattern Options gets the Move Tile with Art checkbox under Size Tile to
Art. With it on, a move of all of the tile art in pattern editing mode
moves the tile as far as the art moved, pixel-grid snapping included:
object.move, object.nudge, object.transform with a translation, and
drags with the Selection tool. A group counts as moved when each of its
members moved. A move of only
some of the art, a copy, a rotation, a scale and a move of
direct-selected anchors leave the tile where it is. The option is off
for a new pattern.
pattern.options takes moveTileWithArt and pattern.list reports it. A
pattern.options call that changes nothing no longer records an undo
step.
Separations Preview and printed separations clamped a linked spot or
Registration tint to 0..1, but a NaN tint passed through the clamp and
reached the plate's coverage as NaN. A native file can store an infinite
tint (a number such as 1e39 read into an f32), and a blend between two
such paints yields NaN. A tint that is not a finite number now prints no
ink, as a gradient stop's process plate amounts already did; finite tints
are still clamped, and a stop's process plates still print beside it.
A click on a symbol instance hit only its art's geometric box, and a
marquee touched only that box, so art that a clipping path's live
geometry effects move past the box could be seen but not selected.
- Outside its box, in Preview, a click hits an instance where its placed
art hits (dynamic overrides and 9-slice placement included), and a
marquee touches the placed art as it touches a group of that art.
Outline view and layers with Preview off keep the box alone.
- The quick reach of an instance takes in the regions of the clipping
paths with live effects in its art, so the groups around it no longer
cull those clicks.
- A form other than the default, set with text.setRangeStyle or
text.setFormat, takes away the characters' glyph choice, which would
otherwise keep drawing its own glyph. "default" keeps it.
- With a width form (fwid, hwid, twid, qwid), shaping leaves out palt and
turns kern and apkn off, and SVG output writes font-kerning: none and no
palt, as the OpenType feature list asks. proportionalMetrics and kerning
keep their values.
- The Glyphs panel menu counts a width form as available when a face has
the feature in GSUB or GPOS.
- At a caret, the menu's check marks and its no-op check read all the
text of the object, which is what the command formats. Choosing the
current form again is not skipped when a character has a glyph choice.
Unit::parse took one level of recursion per + - * / sign, so a text such
as "1+1+...+1" with 200,000 terms overflowed the stack and aborted the
process. Every number field, parse_number and every command parameter read
as a length went through it.
Text with more than 128 + - * / signs now reads as nothing; text with 128
or fewer reads as before. docs/mcp.md states the limit for length strings.
The test a_very_long_expression_reads_as_nothing aborted with a stack
overflow before the change.
Type on an open path can now start before the path's start: its start
is stored below 0, the span runs from there, and the characters whose
middle falls before the path's start are not drawn, as SVG 2 lays out
text on a path (https://www.w3.org/TR/SVG2/text.html#TextLayoutPath).
The text keeps every character, and the start bracket stays at the
path's start. Past the path's end, text that does not fit is overflow,
as for other type on a path. Type that starts on the path draws every
glyph as before.
- SVG import keeps a <textPath> start before an open path's start
(text-anchor end or middle, or a negative startOffset) instead of
starting the text at the path's start, which drew every character.
- SVG export writes it as a negative startOffset.
- PDF export writes only the characters drawn on the path.
- The legacy .ai and .ai editing data writers write the type from the
path's start with the type attributes warning.
- type.pathOptions takes a start below 0 for type on an open path; on a
closed path it is the path's start, as before. A flip starts the type
at its start bracket. Dragging the center bracket slides it from where
it starts, and no further before the path.
- A click at the path's start places the caret by the first drawn
character, and the caret in the hidden characters stands at the
path's start. The highlight of substituted fonts and glyphs leaves
them out.
- Release Type on a Path keeps the first drawn glyph where it was
drawn, with the hidden characters before it.
- The Touch Type tool shows no box for a hidden character, and
text.touchType returns an error for one. A character with a drawn
glyph is changed by that glyph.
Docs: docs/mcp.md, docs/target-app-parity.md.
Reverse Path Direction reversed each member path of a compound path and
turned the members' own stroke records, but left the compound path's
strokes as they were. A compound path's strokes run along its members'
subpaths in order, so its width profile and pen pressure, tilt, bearing
and rotation then ran the old way and the stroke drew differently.
reverse_stroke_records now also takes a compound path, reading its
members' subpaths in order, and path.reverse turns each compound path's
strokes with the combined reversal of its members before they reverse.
As for a path, the strokes turn only when every subpath turns alike.
- Outline Stroke on a graph's strokes, including Object > Expand with
Stroke on, adjusts the bounds the graph keeps, the same way
Create Outlines on its labels does. Before, the stroke outlines
changed the bounds of the art without type, and the next redraw
stretched the plot by the width the outlines added.
- A graph that keeps `placedArt` and has no art other than type left
is no longer measured on the bounds of all its art. A label edit on
such a graph moved and stretched the plot at the next redraw; the
plot now stays where it is.
- A redraw no longer measures a move or scale on art that has no width
or no height now, such as a graph left with one axis line. Before,
the plot collapsed to no width.
- A clipping group in a graph that holds type is measured on its clip
when the clip does not depend on type, so moving art outside the clip
does not change the bounds. Blends, envelopes and repeats are
measured whole, as they are drawn.
- The doc crate's helper is named `graph_art_without_type` and sits
with the file's other free functions.
- docs/mcp.md lists Outline Stroke and states that moving an outlined
label, a swatch, an axis or a tick mark on its own can move or scale
the plot, and that a graph left with only labels, or with art that
has no width or height, does not follow a move.
- Tests: a scale of the graph made before outlining a label, a move of
a graph opened from `.ai` after its label is restyled and moved,
Outline Stroke after a move, a graph left with only its labels or
with one line, and clipping groups holding type.
With Show East Asian Options on, the Glyphs panel menu lists Traditional
Forms, Expert Forms, JIS 04, JIS 90, JIS 78 and JIS 83 Forms, Monospaced
Full-Width, Half-Width, Third-Width and Quarter-Width Forms, and Revert
To Default Forms. Each form draws the selected characters with the
font's OpenType feature for it (trad, expt, jp04, jp90, jp78, jp83,
fwid, hwid, twid or qwid). A form is checked when every selected
character has it and disabled when none of the faces that draw the
selected text, fallback faces included, has the feature.
The form is a new character attribute, glyphForm, one form at a time
(text.setFormat, text.setRangeStyle). It is saved only when set,
character styles carry it, and runs that differ only in their form
shape as one piece of text. SVG writes it in font-feature-settings;
PDF draws the glyphs from the layout.
oversized_tiff now also refuses a TIFF whose JPEG-compressed strip or
tile (Compression 7) declares a frame wider or taller than the strip or
tile, one with more than MAX_TIFF_CHUNKS strips or tiles, and one whose
JPEG headers take more than 16,777,216 steps to read. It reads BigTIFF
directories, follows the layout and the repeated tags the decoder
reads, and refuses offsets of types it does not read.