A piece linked to a global swatch is drawn in the swatch's current color at its own tint, and kept art and rasters follow a color or spot edit and its Undo. A value of `paintOutput` other than true is refused by a translated error. Tests in the effects crate pass the new document argument.
SVG export wrote an SVG filter as a live <filter> when its SVG 1.1 form
was at most 64 KB, without counting the region and id it writes into
it. A filter close to the limit came back over it, SVG import dropped
it, and the reopened object had no filter.
Export now leaves room for the id and the measured region, checks the
SVG 1.1 form the way import does, and counts each character past U+00FF
as the character reference Latin-1 output writes. A filter that does not
fit is exported as the other pixel effects are. The SVG 1.1 form and its
check are kept for the filters seen last, as checked filters already
are, so export does not check one filter again for each object.
Generic CMYK's tone curves now pass through the CGATS TR 001 tone value
increase of each ink at 40% and 50% (C 20.0, M 17.6, Y 16.8, K 21.6 at
50%), and its 16 Neugebauer primaries mix linearly, so a single ink's
tints gain as TR 001 gives. The 300% ink limit stays. The primaries, the
black-generation curve and the black point are VectorCraft's own values.
- The black point is 90% black under neutral CMY that fills the ink
limit: sRGB black separates to C75 M68 Y67 K90 instead of C67 M67 Y67
K100.
- Black follows a curve over the gray component of the black-free
solve, raised by how far that solve stays lighter than the target.
Grays from sRGB 177 up carry no black, and sRGB 128 gray separates to
C50.5 M42.2 Y42.0 K7.5 instead of C38.8 M26.3 Y29.9 K24.4.
- Display of CMYK fills, swatches and imported CMYK values and the
separation of RGB and Lab colors use the same model.
Paper white still separates to C0 M0 Y0 K0, but other separations
change, and so does the display of CMYK colors with ink. Tests that held
numbers of the old model are updated.
A Transform or Free Distort before a painted effect on a fill or stroke moved the shape but left the placed gradient at its old position, both on pieces that keep the fill or stroke and on the geometry drawn after a refused result. The inherited fill or stroke now takes the same gradient move as the Transform branch.
With the Rectangle and Ellipse tools, Cmd lends the selection tool chosen
last, and Copy already took the anchors Direct Selection picked. The
Curvature tool, which Cmd lends Direct Selection, copied the whole path
before this PR, as the Pen did.
The remembered selection is now tied to the document it was made in, by its
uid, instead of being cleared on every tool reset: another view of the same
document, or closing an inactive tab, kept the anchors picked but made Copy
take the whole path.
A lent gesture that leaves the selection as it found it (a Cmd+Shift marquee
over nothing) is no longer recorded as a pick, so the Pen's last anchor stays
its own and Copy takes the whole path.
Also records #6123 in target-app-parity.md.
With the Pen or Curvature tool, Copy and Cut ignore the anchor selection,
so that the last anchor the Pen leaves selected doesn't make Copy take just
that anchor (#2122). Anchors picked with the Direct Selection that Cmd/Ctrl
lends those tools were ignored too, and the whole path was copied.
The session now remembers the selection the lent tool leaves when it gives
the tool back. While that is still the selection, Copy and Cut take the
picked anchors and segments, as with Direct Selection chosen.
Object > Expand of gradient and pattern fills now expands the pieces a
painted live effect draws one by one, so a piece keeps its own paints.
A later painted effect on a fill replaces only the first fill of a piece
and leaves the piece's other fills in place.
Document Info passes the document when it reads an image's painted fills.
swatch.new stored a gradient or pattern as it was given. A gradient
swatch made from a gradient swatch by name, from a fill linked to one,
or from a gradient that names one (the Gradient panel's add to
swatches) kept the link to that swatch, so copying art that uses the
new swatch brought the other swatch along too. A pattern swatch made
from a current fill picked up from art with transformed tiles kept
that transform, and art the swatch was applied to took it in place of
its own.
The new swatch now drops the gradient's link and stores the pattern
untransformed. A gradient swatch keeps its aspect as before.
A gradient placed with the Gradient tool stayed where it was when the
object's Transform or Free Distort effect moved, turned or scaled the
outline, so the shape slid across its own gradient.
The Transform effect now maps placed gradients by its own transform,
and each of its copies takes them as many times as it takes the
transform. Under Free Distort, each path's placed gradients move and
scale from the path's bounds before the effect to its bounds after it.
This change does not alter gradients fitted to the object.
The canvas, Expand Appearance and export, Pathfinder and compound
shapes, groups, a fill's or stroke's own effects, and Object › Expand
of a gradient fill apply the same rule. In a group, the own fills and
strokes of the group, of the groups inside it and of a symbol's art
follow it too, and images and symbol instances that a group's
Transform effect moves take the placed gradients of their own fills
and strokes along. A group whose path keeps its shape because the
effect would pass the geometry budget keeps its own gradients in
place.
This changes how existing documents draw: a gradient placed on a path,
or on an image's or symbol instance's own fill, inside a group with a
Transform effect now moves with it. Before, only the gradients of type
moved (#2214).
How gradients follow each effect is VectorCraft's own rule. The
Distort & Transform help page describes what the effects do to the
object:
https://helpx.adobe.com/illustrator/desktop/manage-objects/reshape-transform-objects/distort-and-transform-effects-in-illustrator.html
A top-object envelope splits its outline into four sides at four corners
and maps the content onto the Coons patch of those sides. The sides
shared out the content by length, and the corners were the anchors or
curve points nearest the bounding box corners.
Each piece of a side between anchors and corners now takes a share of the
content's width or height in proportion to the length of its control
polygon, spread along the piece by its curve parameter. A straight
segment spreads it evenly by length. A rounded rectangle stays close to
the identity, and the content follows the curves of a side whose segments
differ in size.
Each corner is now the nearest anchor to its bounding box corner among
the sharp anchors that point out of the outline and lie within 47.5% of
the box's width and height from that corner. A handle shorter than
0.01 pt, or tangent unit vectors that differ by 0.01 or more in x or y,
makes an anchor sharp, and the first one along the outline wins a tie.
Without such an anchor, the corner is the outline's nearest point to the
box corner, moved onto the end anchor of its segment within 0.5% of the
segment's parameter. Envelopes opened from .ai files keep the corners the
file saves.
These are VectorCraft's own rules. Existing top-object envelopes redraw by
them. Gradient meshes made from a path keep their sides measured by length.
- crates/doc/src/live/mesh.rs: Coons::from_top_object and the corner
search, used for top-object envelopes.
- EnvelopeKind::TopObject gains an optional `corners` field (anchor
indices); the .ai importer fills it from the mesh's corners.
- Params text of object.envelope.makeWithTopObject, docs/mcp.md
(Envelopes) and a progress line in docs/target-app-parity.md.
The reference check now applies wherever a painted effect's geometry is
used: a result whose swatch or pattern is refused keeps its input instead
of giving its geometry. Pathfinder art of type, reshaped groups, compound
shapes, image fills, the renderer's bounds and Object > Expand look the
references up in the document, and the renderer drops its kept bounds and
geometry when the names of the swatches or patterns change.
With Snap to Grid on, a move of objects on one perspective plane at
different depths applied the snap correction only to the objects at the
first object's depth, and every other object moved by the pointer's
offset read at its own depth. Those objects left the grid and lost their
spacing.
Every object on the first object's plane now moves by that object's
plane offset plus the correction, so the edge of the joint bounds nearer
a gridline lands on it and the objects keep their spacing. A selection
at one depth snaps as before, and objects on other planes keep their own
offset.
The command catalog said "* ", "# ", "> " and "+ " all start a list
with the filled dot. It now names the filled dot, hollow circle,
filled square and dash. The text.startList test checks each of the
four triggers and the marker the layout draws.
Typed list detection gave every bulleted trigger the filled dot. Now
`*` and a space start a list with the filled dot (•), `+` with the
hollow circle (◦), `#` with the filled square (▪) and `>` with the dash
(–), each one of the existing Bullets presets. `1.`, `1)`, `A.` and `A)`
start the same numbered lists as before.
Only the list a typed trigger starts changes. Lists already in a
document keep their bullets, pasted triggers start no list, and Undo
and Redo of a typed list work as before.
Docs: docs/mcp.md (typed list paragraph), docs/target-app-parity.md.
- typed_lists_off_leaves_typed_markers_as_text turns the preference back
on for each marker and checks that typing it in a new paragraph starts
a list with a Bullets and Numbering undo step.
- start_lists_from_typed_markers_is_a_saved_type_preference: the Type
page shows the checkbox, checked by default; unchecking it turns the
preference off in the session and in the saved preferences, and every
bundled language translates its label.
Preferences > Type gets Start Lists From Typed Markers (`typedLists`, on
by default). With it off, a list marker and a space typed with the Type
tool at the start of a paragraph (`1. `, `1) `, `A. `, `A) `, `* `,
`# `, `> `, `+ `) stay as text and start no list. `text.startList`,
`text.setFormat {list}` and the Bullets and Numbered List buttons work
as before.
The preference reaches the Type tool through `ToolContext::typed_lists`.
The label has a row in every catalog.
A blur or shadow over a painted piece is drawn again when a swatch or
pattern the piece names is deleted, or when the tiles of a named pattern
change. The raster's inputs now include the swatch and pattern names and
the pattern definitions for content with a plug-in effect.
Pathfinder effects, compound shapes, Expand Appearance and pattern
expansion now pass the document to the effects they evaluate, so a
painted piece that names a swatch or pattern takes part as drawn instead
of being refused. A path with a painted effect takes part in Pathfinder
and compound shapes as its pieces, each with its own paint, inside the
path's opacity and blend mode.
The renderer's kept effect art and live evaluations now count the
document's swatch and pattern names for objects with a plug-in effect,
so deleting or restoring a swatch a piece names redraws the object.