Right-to-left type on a path that overflows searched for the start of its
text that fits with a binary search, which assumed that a longer start
never fits once a shorter one does not. A letter tracked to a negative
advance breaks that: with steps of 6, 6, -3 and 6 points in a 10 point
span, the first three letters fit while the first two do not, and the
search showed only the first letter.
- Without hanging punctuation, and with no spacing or on a path of one
straight segment, every start is measured in O(n log n): each glyph
keeps its place in the whole text's visual order, except the trailing
whitespace and controls that UAX #9 rule L1 sets to the paragraph's
level.
- With hanging punctuation, or spacing on a curve, when a letter has a
negative advance, a start is a candidate only when its glyphs, in its
own visual order and each at the least step it can take, reach no
farther than the path's length. This lower bound holds with negative
advances.
- At most 32 candidates are arranged from the longest. When none of
them fits, a binary search over the rest shows a start that fits,
which is not always the longest.
- With hanging punctuation, or spacing on a curve, text with no negative
advance keeps the binary search.
Right-aligned and centered type on a curve with Spacing was placed using
the width its glyphs have at the start bracket, while the steps were
measured where the line was placed, so a line that fits could end past
the end bracket and lose glyphs. It is now placed using the width of the
steps it has where it is placed.
The Character panel menu has Warichu and Warichu Settings… with Show East
Asian Options. Warichu characters are set at a percentage of their size
and stacked on 1 to 6 lines inside their line: one above the other in
horizontal type and side by side in vertical type. Warichu Settings sets
Lines, Line Gap, Scale and Alignment.
- text.setFormat and text.setRangeStyle take warichu, warichuLines,
warichuGap, warichuScale and warichuAlign; ui.warichuSettings opens
the dialog.
- A stretch of warichu characters is one block that stays whole on one
line. The canvas and every export draw the stacked lines; SVG, PDF and
the .ai writers write such type as outlines, as they do ruby. Type on a
path sets the characters at their own size.
- The attributes are saved natively, carried by character styles and
translated in every complete catalog.
Docs: docs/mcp.md, docs/type-parity.md.
Single Word Justification adds no space inside an inseparable pair. A
right-to-left line draws the second half's cluster before the first half,
with the cluster's glyphs in logical order, so a dash followed by a
combining mark puts the mark next to the first dash. The pair is now found
from the two neighboring clusters instead of neighboring glyph indices.
Paragraph panel menu > Bunri-Kinshi (with the East Asian options) and
text.setFormat {bunriKinshi} turn it on per paragraph. A line then
never breaks inside two em dashes, two horizontal ellipses, two two-dot
leaders or the two halves of a vertical kana repeat mark, the pairs W3C
JLREQ lists for class cl-08 (https://www.w3.org/TR/jlreq/#cl-08), nor
inside a chain of em dashes. Both composers, vertical type, Kinsoku
Shori Type, hyphenation and No Break follow it, and a pair wider than
the line stays whole on it. Justification and letter spacing add no
space inside a pair.
The setting works only with a Kinsoku Set: with Kinsoku Set None the
paragraph keeps the value without effect and the menu item is
unavailable. It is off by default, saved with the paragraph only when
on, carried by paragraph styles (Paragraph Style Options > East Asian
Composition Settings), and turned off by Reset Panel. A value that is
not true or false is refused. The .ai editing data has no field for it,
so saving reports a paragraph with it on and a pair in it as left out.
Docs: docs/mcp.md, docs/target-app-parity.md.
Characters take two new attributes, `akiLeft` and `akiRight`: space
before and after each character in reading order, in thousandths of an
em from 0 to 1000, measured as tracking is. `text.setFormat`,
`text.setRangeStyle` and character styles set them; values that are not
numbers or are outside the range are refused, and a file holding one
outside the range opens with the nearer end. Both are saved only when
not 0.
- Layout: Left is the space above a character in vertical type and on
its right in right-to-left type. Wrapping counts the space, a line's
end keeps it when aligned, and justification and Optical kerning
leave it at its set width. A ligature, a letter with its marks and a
tate-chu-yoko block take the values of their first character.
- With Fractional Widths off or System Layout on, the space before and
the space after a character are each set in whole points and added
to its rounded width, so justification keeps them at that width. A
tate-chu-yoko block rounds the space above and below it the same way.
- Character panel: with Show East Asian Options on, Insert Aki Left and
Insert Aki Right fields with 0, 250, 500 and 1000 in their menus;
Reset Panel sets both to 0.
- Character Style Options › Advanced Character Formats shows Insert
Aki Left and Insert Aki Right, with the Character panel's 0, 250, 500
and 1000 in their menus; a typed value below 0 or past 1000 sets 0 or
1000, and Reset Panel unsets both.
- SVG export: live text places each character the space moves, and
type on a path with Insert Aki is written as outlines.
Docs: docs/mcp.md, docs/target-app-parity.md.
Korean text broke after every Hangul syllable. A paragraph now has
Korean Line Break Anywhere, set from the Paragraph panel menu (with the
East Asian options), from the East Asian Composition Settings section of
Paragraph Style Options, and with `text.setFormat {koreanLineBreakAnywhere}`.
- Off, a word that contains Hangul (the characters between spaces) breaks
only at its spaces and after East Asian punctuation, or where the word
is wider than the line. Both composers follow it, and the word takes no
hyphen. On, a line may break between any two syllables, as before.
- New type has it off. Paragraphs and text objects saved before the
option read as on, so their lines do not move; the value is saved only
when it is off.
- Paragraph styles carry it, Reset Panel turns it off, and the .ai writer
reports it as lost for Korean paragraphs.
The help page: https://helpx.adobe.com/illustrator/desktop/design-with-text/fonts-and-scripts/set-line-breaks-korean-text.html
The command is described in docs/mcp.md, and docs/target-app-parity.md
lists the option.
At the Type tool's caret, kerning goes on the character before the caret.
At the start of the text there is none, so Alt+arrows, the Kerning field
and Reset Tracking and Kerning did nothing; at a later paragraph's start
the kerning landed on the invisible line break.
CharStyle::kerning_before (kerningBefore) is the space before a character
that starts a line by itself: the first character of the text, of a
paragraph, or after a forced line break. Shaping gives its cluster the
space and draws it that much later along the line (right to left the
space is at its right; in vertical type it moves down the column). The
caret at such a line's start sets it (edit::caret_kerning_target), in
type.step, type.resetTracking and the Character panel; text.setRangeStyle
takes it. SVG export starts the line where the character is drawn. The
Eyedropper and character styles leave it alone.
A centred or right-aligned line of tracked type was measured with the
tracking after its last character, so it sat half that tracking
(centred) or the whole tracking (right-aligned) left of where the page
of users' .ai files draws it. That page aligns a line as wide as its
characters without that tracking.
Shaping now records the tracking each glyph's advance holds
(SGlyph::tracking), and a line that isn't justified leaves its last
character's out of the width it is aligned by. The last character is
the last one the line draws before a paragraph's end, a forced line
break or the spaces a wrap leaves; spaces or a tab typed before a
paragraph's end or a forced line break keep the letter's tracking, as
the page does. Forced line breaks and wraps aren't in the files: they
follow the rule so that turning a wrap into a paragraph or a forced line
break keeps the line in place. Hyphenated lines, lines whose last
character hangs, vertical and right-to-left lines and type on a path
keep it. The tracking stays in the glyph's advance, so the caret,
selections, line breaking and Fit Headline are unchanged.
LineInfo::trailing gives the amount. Right-aligned area type sets the
text after its last tab the same way.
What aligns by line widths follows. Convert To Area Type makes its
frame end where the lines are aligned, with room for the tracking, so
tracked type converted either way stays in place. Affinity import lines
up differently aligned paragraphs of artistic text by the aligned
widths. SVG import moves a centred or right-aligned letter-spaced line
back by its share of the last letter spacing, so it stays where a reader
draws it and SVG export, which anchors lines at the end of their
advances, reads back unchanged.
Centred and right-aligned tracked type lays out differently than before
in every document.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
In horizontal type, tracking and manual kerning are now thousandths of
the em as the Horizontal Scale draws it: at 50%, a tracking of 100 adds
0.05 em after each character. They were added at the full em while the
glyph advances took the scale, so narrow tracked type drifted from the
page of users' .ai files letter by letter. That page writes such type's
character spacing as the tracking itself in a text space as wide as the
scale, which PDF scales by it (ISO 32000-1 9.4.4). Vertical type keeps
the full em: its advances down the column don't all take the scale.
vectorcraft_text::spacing_scale gives the factor. Shaping, inline
graphics and the Optical pairs use it, and so do the conversions from
points back to thousandths of an em: the automatic kerning the Character
panel reads and Touch Type's limits (glyph_em), Combine Point Text, and
PDF import, whose tracking is now the file's Tc. Scale Text Attributes
now keeps tracked type where a horizontal stretch drew it.
SVG export writes letter-spacing in thousandths of the font size it
writes (the vertical scale), so uniformly scaled type keeps its spacing
in a viewer.
Type with both a Horizontal Scale other than 100% and tracking or manual
kerning lays out differently than before, in every document.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Align to Path moved the whole line by the largest ascent and descent
among its characters. Each character now moves by its own font, size
and vertical scale. Ascender runs the top of the font's em box along
the path: the ideographic em box that the font's BASE table gives, or
in a Chinese, Japanese or Korean font the one that its typographic or
hhea box, a one-em box-drawing cross or its ideographs give; else an
em box centered on the cap height. Descender runs the bottom of the font's
bounding box along the path, and Center runs a line at half the height
of the top of the font's H along it. In vertical type, Ascender and
Descender move the characters half an em, and Center leaves them on
the path.
Existing documents with Align to Path set to Ascender, Descender or
Center lay their type out at a new distance from the path.
Layout kept no record of a run's face, so each paragraph looked up the face
of its first character three times for its line metrics and once more to
shape it. The layout now keeps each run's face the first time it is looked
up and uses it for shaping, for paragraph metrics, for on-path type's empty
line and for the column offset of vertical point type. Glyphs, positions,
bounds and baselines do not change.
A test-only helper lays text out looking every face up at each use, and a
new test requires point, vertical point, area and path type laid out both
ways to match exactly.
The layouts of 5,000 short point type objects take a median of 215 million
CPU cycles of the laying-out thread instead of 236 million in a release
build (11 alternating runs of each build on Windows 11, measured while
other builds were running).
Opening a document laid out every type object for its bounds and
baselines and threw the layouts away, and the first frame laid the same
objects out again. The open now keeps them, up to 128 MiB, and a frame
takes each one once.
A frame takes a layout only for a text object equal to the one laid out,
and only while the fonts, the system fallback setting and the hyphenation
exceptions are unchanged. When the last frame being drawn ends, the rest
are dropped if a frame took one, and all of them are dropped after eight
frames that take none. A layout with bitmap or color glyphs and a text
object with a gradient are not kept.
Paint-only harakat runs stay inside one shaping cluster so letters keep
their joining forms and marks their attachment. When a character-level
shaping pass matches the monotone glyphs, a glyph may take a later
in-cluster character's run only if GDEF classifies it as a mark (class 3)
and that character is a harakat; otherwise ownership stays at the cluster
start. Conservative: a mark may miss its colour; a base letter must never
take a mark's. Fonts without GDEF and AAT faces fall back the same way.
Insert Kashidas tatweels take the base letter's paint, not a trailing
mark's. Private harakat module; type-parity, target-app-parity and roadmap
M7 evidence updated (scores unchanged). Tests cover paint_only / ranges /
own_chars (wide mark, equal advance, multi-component, single-glyph
ligature, review counterexample), colour, hide, repeated glyph ids,
kashida, forced mark-last emit_kashida, and installed fonts.
In right-aligned area type, the text before a line's last tab sits at its
stops, measured from the left edge, and the text after it (none when the
tab ends the line) against the right edge. The line was laid out from the
left and aligned as a whole, which moved its start off the left edge and
its tabs' text off their stops. Illustrator's own layout in a user's .ai
sets its price lists so. Centred and justified lines are aligned as a
whole as before.
- Auto leading stays auto: each line takes the paragraph's share (key 7)
of the largest type on it. The leading was the first two lines'
distance for every line, so 10 pt lines under a 15 pt heading came in
18 pt apart.
- The paragraph's hyphenation options (keys 10 to 15) are read.
- Area type of one frame whose last lines the file sets, but which don't
fit here (the fallback font, or a descent past the frame's bottom),
gets a frame taller from its bottom (vectorcraft_text::fit_source_lines),
with a warning.
A user's .ai whose type differed from its page by 6.6%, so that it opened
from its PDF part with each line its own text object, now opens from its
layers.
Features take a value (tag=N) in style commands, SVG and native files. Runs that
differ only in their feature lists are shaped in one buffer with ranged features, so
an alternate on one letter of an Arabic word keeps the word joined. FontFace reads
GSUB once (alternate sets, singles, the feature reaching a glyph), names unencoded
glyphs, and alternates_in_context finds a character's alternates in its word.
text.setRangeStyle takes glyphAlternate: null.
Every shaped segment built its own harfrust shaping plan, although a
plan depends only on the face, direction, script, language and features.
Opening a document lays out each type object once, so a document of many
short objects built thousands of identical plans.
A font face now keeps up to 32 plans, oldest dropped first, and shapes
with the one that matches. Feature ranges still come from the shape
call, so text with the same features over other ranges shares a plan.
The glyphs, bounds and baselines do not change.
Docs: docs/target-app-parity.md.
VectorCraft had no lists. A bullet could only be typed as a character,
and the tab after it did not stop at the left indent. The reference app
turns paragraphs into a bulleted list from the Paragraph panel, the
context menu and Type › Bullets and Numbering › Apply Bullets.
text.setFormat takes list ("none" or "bullet") and bullet ("none",
"dot", "dash", "circle" or "square"). The layout draws the bullet before
the first line of each list paragraph that has text, in the font, size
and color of its first character, and starts the text at the next tab
stop, with the left indent counted as a stop. Wrapped lines start at
the left indent, and type on a path draws the bullet too. In a
horizontal right-to-left list paragraph the indents are mirrored: the
bullet hangs at the right, and the wrapped lines start at the right
where the first line's text starts after the bullet. The bullet is not
a character of the text. A paragraph whose left and first-line indents
are both 0 gets 18 pt and -18 pt when it joins a list. Return continues
the list, paragraph styles carry it, Reset Panel turns it off, and the
native file saves it only when it is set.
The Paragraph panel has a Bullets button with a list of the five
presets, and Type › Bullets and Numbering › Apply Bullets and the
context menu run type.applyBullets. Live SVG text writes the bullet's
character, and SVG writes type on a path with bullets as outlines. DXF
writes the bullet as a TEXT entity of its own, and legacy .ai export
warns that bulleted lists are left out. The caret, selections, Touch
Type and Show Hidden Characters skip the bullet.
Live SVG text of horizontally scaled type now writes each tab in a
tspan of its own. Before, the characters before a tab shared its tspan,
and its textLength made a viewer stretch them across the tab's gap.
Docs: docs/mcp.md, docs/target-app-parity.md.
Rows two PRs of the batch both changed came out twice in localization-parity, target-app-parity and type-parity; the newest of each is kept. prefs_dialog.rs is formatted.
Optical Margin Alignment and Roman Hanging Punctuation left every
right-to-left paragraph of point and area type, and type on a path
whose first paragraph runs right to left, as it was: the quotation
marks, full stops and commas at the ends of its lines stayed inside
the margins.
A right-to-left line now hangs at the margins its alignment places it
against, as a left-to-right line does. Auto aligns a right-to-left
line at its right, so it hangs there. The line is read from right to
left: where it hangs at its left margin, a full stop and the quotation
mark after it that end the line hang together. In vertical type,
where the characters of a right-to-left paragraph run from the top
down, the pair is read from the top.
Type on a path whose first paragraph runs right to left hangs at its
brackets by the same rule. In horizontal type, Auto places it at the
end bracket, so it hangs there. On a closed path, its hang at the end
bracket gets the space between the end and start brackets before its
hang at the start bracket does, as in right-aligned type.
A justified right-to-left line of one word is spread between its
letters as they are drawn. The gap after each letter went to the
letter that follows it in the text, so the two leftmost letters
touched and the word ended one gap short of the right margin.
Docs: docs/mcp.md, docs/type-parity.md, docs/target-app-parity.md.
Optical Margin Alignment and Roman Hanging Punctuation hung punctuation
in point and area type only. Type on a path kept its first and last
glyphs inside its brackets with either option on.
When Optical Margin Alignment is on, or the first paragraph has Roman
Hanging Punctuation on, the glyphs at the ends of left-to-right type on
a path now hang outside its brackets by the same amounts, measured
along the path. The type hangs at the start bracket when its line is
placed there, hangs at the end bracket when the line is placed there,
and hangs at both when it is centered. Glyphs that hang past the end
bracket do not make the type overflow. On an open path a hang stops at
the path's end, and on a closed path the two hangs together take at
most the stretch between the end and start brackets. SVG export writes
type on a path that hangs as outlines, with a warning.
Docs: docs/mcp.md, docs/type-parity.md, docs/target-app-parity.md.