A plain drag of the annotator's end handle now slides the end along the
bar's line, at least 10 px from the start, and snaps only to targets on
that line. Alt-drag moves the end freely, changing the length and angle
together, with Shift at Constrain Angle steps. A vector of no length
still moves freely.
Docs: docs/mcp.md, docs/ui-parity.md.
docs/mcp.md said the Character panel shows the two diacritic fields with
"Show Middle Eastern Options" on. No such item exists: the fields show with
Show Indic Options on (Preferences > Type), as the commands' params text says.
Tsume no longer stops at horizontal type. In vertical type an upright
character loses its share of the blank space above and below its ink,
inside its cell down the column (the font's vertical metrics, else at
least one em, with the Proportional Metrics change), in point type and
on a path. A character lying on its side is measured along its own
width, and the characters of a tate-chu-yoko block close up across the
column while the block keeps its one em.
Tsume now measures what a glyph paints: its COLR or SVG art, else its
color bitmap, else its outline, so a color glyph is no longer measured
by the outline its art replaces.
Docs: docs/mcp.md, docs/target-app-parity.md, text.setRangeStyle and
text.setFormat params.
Opening a PDF with Crop To Trim Box put each artboard 36 pt after the
one before, while the bleed boxes round the trim boxes became the
document's bleed. With a bleed over 18 pt, one page's bleed reached
into the next artboard, and a page exported with its bleed showed part
of its neighbor. The document's bleed is now read from every picked
page first, and the artboards are 36 pt apart plus that bleed on both
sides, as linked pages on their trim boxes are laid out since #7723.
The outline of the area an Eraser drag covers used the set Angle and
Roundness and varied the Size only with Pressure, while the release
(since #7726) erases with the tip the pen gives at each point on the
Pressure, Tilt, Bearing and Rotation modes.
Each step now takes the tip halfway between those at its ends, read as
the release reads the stroke. A step whose angle or roundness varies is
outlined where its own tip is round, and the parts inside other steps'
areas are removed as before. A pen turned in place gives the last step
the new tip, and a changed mode or Variation starts the outline again.
A round tip whose Size follows the pen shows each step that wide.
Random shows the value itself until the release draws it.
docs/mcp.md said that moving a label on its own never moves or scales a
graph's plot. A graph saved without `placedArt`, or with one that has no
width or height, is measured on `placed`, the bounds of all of its art
including the labels. Moving an outermost label of such a graph on its
own changes those bounds, and the next redraw moves and scales the plot.
The paragraph now says so.
The read-root check for SVG output now looks at the same art the
writer draws:
- A placed document's art is checked, with the pixels its file holds.
A placed native file that links an image outside the read roots was
written with that path under Images: Link.
- Hidden objects inside symbols, patterns and graph designs are left
out unless hidden layers are kept, as they are in the layers.
- With profile tiny12 the file leaves out opacity masks, and their
images are not checked.
- An object whose effect SVG has no filter for is checked as the image
the file draws of it, for file output and clipboard.exportSvg alike.
The last three refused files and clipboard SVG that name no file
outside the roots.
When Noise picks the nearest color for a speck, the speck's average now
leaves out the semi-transparent pixels along a cut-out image's edge that
are the color beside them blended with the transparent background.
settle_cut_edges returns which pixels those are. A speck made only of
them merges by border. In Grayscale the speck's gray is read with luma,
the gray Grayscale traces with, and the test probe shift_probe denoises
as a trace does.
The docs now say the rule applies in Color and Grayscale (in Black and
White a region has only one neighboring color, so Black and White Logo
changes only by its Noise value), name `ea3f81d9c3` as the base of the
measurements, and say that the gradient-border test sets Noise 15
because at Noise 8 its borders stray 0.92 px against a 0.9 px limit.
Paste without Formatting sets each pie legend label in a wedge to white or
black from the wedge colors before it pastes, but a wedge linked to a global
swatch that the document gives another color takes the document's color
only during the paste (swatchConflict "merge", the default). A light wedge
merged into a dark swatch kept a black label, and a later redraw turned it
white.
The copied colors linked to merged swatches now take the document's color
before the labels are set, so the labels match what a redraw sets. Graphic
style links are left for the paste to relink.
file.place.queue read each file without a password, so an encrypted
PDF, .ai or .ait file was skipped and never reached the cursor. It now
stays in the cursor at 612 x 792 pt, VectorCraft's own size, with
needsPassword: true and no thumbnail. A click or drag on it in the app
asks for its password, with the Place dialog's Show Import Options on
or off; headless, a click on it places nothing. A file that fails for
a bad option or for another reason is still refused or skipped.
File > Place of an encrypted PDF given a page and no password, with
Show Import Options on, now asks for the password too, as it does with
the option off; it used to fail for want of the password.
When Profile inclusion is set to Don't Include Profiles (`profiles:
"none"`), gray, RGB and CMYK images are written in device color spaces
without their ICC profiles, and a JPEG that is kept as is loses its
APP2 ICC_PROFILE segments. PDF/A-2b, PDF/X-3 and PDF/X-4 keep tagging
their images.
Leaving the setting out keeps the earlier output. `profiles` now
serializes as null when not set, `"default"` clears a preset's value,
and Save PDF > Output lists Default first. Presets and stored settings
saved earlier hold `"profiles": "none"`, so exports from them now drop
image profiles.
A region below Noise joined the color it shares the longest border with, so
the specks of a thin dark line on a light ground joined the ground and the
line broke into dashes. When that color is 10 or more apart from the region's
own (Oklab x 100), the region now joins the neighboring color nearest its
source pixels, among the colors sharing at least a tenth of the longest
border. A single pixel tied between colors still joins by border.
6 Colors and 16 Colors move from Noise 15 to 8, and Black and White Logo from
25 to 5.
When a click's press lands in one face and its release in the next, the
drag fills both. The bucket now notes the fill every face the drag
crosses had before the press, the release included, so a double-click
or triple-click that follows on such a face compares that fill instead
of the one the first click gave it. This also holds when the release of
the last click crosses into the clicked face.
When the first click makes the Live Paint group, or merges the selection
into a selected group, the crossed face counts with the fill it was made
with: a kept face's paint from the merged group (an unplaced gradient
fixed to its fit), else the fill Make gives it, the topmost fill that
draws of the front-most source path over it that has one. A selected
group's edges no longer count as source paths.
A double-click whose two clicks land on two joined edges now paints the
edges joined through the other edge its clicks painted:
livePaint.strokeEdge takes `through`, edge ids that the join counts as
drawing with `match`, and the tool passes that edge. When the second
press lands on the next edge and is released back on the first, the
double-click matches the first edge's stroke paint from before the
first click.
A press that the view tools take (held Space, the middle button), or
that holds Cmd/Ctrl and goes to the lent selection tool, now counts as
a press that paints nothing, so the clicks around it are not taken for
one triple-click's: the session tells the tool through the new
Tool::press_elsewhere.
The tool doc, docs/mcp.md and the progress-doc line now say that a click
records an undo step only when it changes a paint, and that a
triple-click paints the faces that have the clicked face's fill (and the
edges that draw with the clicked edge's stroke paint) with the bucket's
paint.
Follows #7291.
The 3D and Materials panel gets an Export 3D Object button. It adds the
selected objects that have a visible 3D effect to Asset Export as 3D
assets through assets.add3D, the command behind Asset Export's own
Export 3D Object, selects their assets there and shows the Asset Export
panel. Objects without a 3D effect, and a 3D object inside another
selected one, are left out. The button is unavailable while no selected
object has a visible 3D effect. Adding is one undo step, and nothing is
recorded when every object is an asset already.
Docs: docs/three-d.md, docs/mcp.md, docs/effects-parity.md,
docs/target-app-parity.md.
The Variables panel menu gets Import…, which opens one file dialog for
CSV, TSV, TXT and XML files. `variable.import {path}` picks the reader by
the file's extension, in any case: a .csv, .tsv or .txt file is read as
Import Data Sets… reads it, and an .xml file as Load Variable Library…
reads it. Any other extension, or none, is refused before the file is
read. Import Data Sets… and Load Variable Library… stay in the menu.
Docs: docs/mcp.md, docs/target-app-parity.md.
docs/mcp.md said every PSD or PSB file of a loaded place cursor comes in
with the choices made last. With Show Import Options on, each such file
that has import options shows PSD Import Options when it is clicked or
dragged (place::place_from_cursor, and the psd_import test
a_cursor_loaded_with_show_import_options_on_asks_for_each_psd_file);
only with it off do the last choices apply.