A gradient's Separation or DeviceN space, and EPS's %%DocumentCustomColors,
named the spot ink of every linked stop. A stop out of order whose
neighboring stretches have no width, a stop at a tint of 0 without process
plates, and in PDF a stop whose stretches are fully transparent print no
ink, but their spot inks were still declared, so separations got an empty
plate.
- vectorcraft-color: Gradient::drawn_stops (the rule Document Info uses,
moved here) and Gradient::reached_stops (every stop taken as opaque).
- PDF: Separation and DeviceN shadings, the Perceptual spot shadings and
the spot-image warning name only inks of drawn stops at a tint above 0
or with process plates; other stops are written with no ink, so their
process inks and RGB or Lab colors no longer shape the space either.
- EPS: the same with reached stops, since EPS writes stops opaque; a
transparent spot stop keeps its ink.
Output is unchanged when every stop colors part of the gradient and every
spot stop has a tint above 0 or process plates.
Text on a path of one closed subpath that is anchored to start before
the path's start point (text-anchor end or middle, right-to-left start,
or a negative startOffset) started at the start point, and text offset
past the path's end started at its end. It now wraps around the path,
as SVG 2's startOffset attribute describes for a single closed subpath
(https://www.w3.org/TR/SVG2/text.html#TextPathElementStartOffsetAttribute):
text-anchor end at startOffset 0 ends at the start point. Open paths
and paths of several subpaths still start the text at the path's start
or end.
A CMYK TIFF written again, a CMYK JPEG that the Compression settings
resample or compress again, and a CMYK image written with its mask as
its soft mask lost the CMYK profile the image embeds. Such an image is
now written in an ICCBased space holding that profile, byte for byte,
when output.profiles is all or taggedSource, and in PDF/A-2b, PDF/X-3
and PDF/X-4 unless profiles is destination. Pixels the Output settings
convert are never tagged with it.
A CMYK JPEG embedded as it is now follows the same rule instead of
always carrying its own ICC_PROFILE segments: with profiles none it is
DeviceCMYK, and PDF/X-1a export no longer refuses a CMYK JPEG that
carries a profile.
A profile tags an image only when it is at most 16 MiB and its declared
size, acsp signature, device class, CMYK color space and tag table are
well formed. Tagged CMYK documents blend transparency in the document's
CMYK profile space, not in an image's own; without that space they
blend in DeviceCMYK, or keep their RGB space in PDF/A.
An SVG file that an <image> links to was parsed with usvg's
from_data_nested, which drops every href to a file, so a PNG or JPEG
that the SVG file linked to disappeared without a placeholder or a
warning.
The files a linked SVG file's own <image> elements link to are now read
the way the imported SVG's links are, relative paths from that file's
folder: a raster stays linked, an SVG file imports as vector art, and
one that can't be read (missing, or refused by the reader) gets the
placeholder stretched to its box, its link and a warning. The same href
in SVG files of two folders names two files. A link that leads back to
an SVG file showing it gets the placeholder and a warning. Reading the
links of linked SVG files stops at the element depth cap and at 1,024
reads and 512 MB of text per import, the same limits decoded nested SVG
images have, counted separately from them. An SVG data URL still reads
no file links, having no folder of its own.
SVG 2 tells a viewer to ignore external references in an SVG shown by
<image>; reading them on import is VectorCraft's own rule.
Checking an Extrude & Bevel (both kinds) or Inflate effect built every
shape's profile about the profiles' bounds, then built the fill and
stroke solids again about the bounds of the regions they paint. A
filled shape's profile is its fill's solid, so that solid was built
twice. When a stroke reaches past the shape, the first build also used
bounds the effect does not draw it about.
The check now builds the profile on its own only where no drawn solid
is built from it: every shape for Rotate, and for Extrude & Bevel and
Inflate a shape with no fill (strokes only, or no paint). A filled
shape's solid is built once, about the bounds the effect draws it
about. The shadow check is unchanged.
Tests count the solids the check builds: an object with a fill and a
stroke, a group of two such members, an effect on the fill and the
shadow on; a shape with no fill still has its profile built.
A recovery copy written in the background set "Saved recovery data for
<title>" (or its failure line) when it finished, over any message shown
since it started, such as Restore's count with its notes or the
"Saving…" line of a copy started after it.
The status bar now counts the messages VectorcraftApp::status sets. A
copy shows its result only while its own "Saving recovery data for …"
line is still the latest message, or right away when it was written
without the worker. A failure is still logged, and a failed folder is
still recorded for automation replies, when its line is not shown.
Place, Open and relink read a CMYK or grayscale TIFF with an alpha
channel through extra_samples_tiff_rgba, which cut every 16-bit sample
to its high byte before converting it. A faint ink or a low alpha was
lost: cyan 129 at full alpha showed as white, and an alpha of 129
became fully transparent.
The samples are now normalized at the depth the file stores them, and
only the resulting color and alpha are rounded to 8 bits (a 16-bit
alpha to the nearest 8-bit value). Associated alpha is divided out at
16 bits. A pixel whose associated alpha is zero now has no color,
instead of keeping its stored color. TIFF 6.0's Associated Alpha
Handling section states this arithmetic and the zero-alpha rule for
RGB data; applying them to CMYK and gray samples is VectorCraft's own
rule.
With Smart Guides on, a selection the Selection tool grabbed by one of
its anchors only landed that anchor on other anchors and centers, or
lined its bounds up. The anchor now also lands on the other objects'
paths ("path"), and where a path crosses another path or a ruler guide
("intersect"), in the order Direct Selection uses for a dragged anchor.
When the anchor lands on a path, the bounds do not also line up with
other objects, and a ruler guide nearby does not pull it off the path.
A selection grabbed anywhere else keeps lining its bounds up.
- Targets::for_move_by_anchor gathers the other art's path segments as
well, and Targets::snap_onto_path lands a point on them or on their
crossings with each other and with the ruler guides.
- MoveSnap::by_anchor uses those targets; the Selection tool picks it
when the press grabbed an anchor.
Reported by pivot-al.
Docs: docs/target-app-parity.md.
The Confining file access bullet said the app's own folders are not
confined. It now names the commands that check the roots for a file
there: the arrowheads edit, reload and list commands, the New Document
profile commands and file.new, and the Scripts folder listing and run,
each linked to its section.
An inset ring limited a corner's miter by moving the corner four times
the bevel width along its bisector. At a corner sharper than about 29°
that the bevel opens (a convex corner with the bevel outside, a notch
with it inside), the bevel still ran out to a spike up to four times
the width and no longer lined up with the art. With the bevel outside,
the wall behind it spiked the same way.
Such a corner is now given twice in the outline before the solid is
built, and each copy moves along its own edge's normal, so the bevel
(and, with the bevel outside, the wall) cuts the corner square, as a
bevel join cuts a stroke. Corners within the limit keep their miters,
and corners where the inset edges meet keep the four-times limit.
A cap's outline skips the straight segment of no length between the
two copies where they do not move apart.
Docs: docs/three-d.md, docs/target-app-parity.md.
With ids, Combine Point Text and Join Point Text take locked and hidden
type. They kept the first piece's object and removed the others, so
naming a visible piece and a hidden one beside it hid the visible text
or showed the hidden text, and the same held for locked pieces and for
pieces in a locked or hidden group or layer.
A piece now joins only pieces that are as visible and as locked as it
is, counting their groups and layers. The selection route takes only
editable type, so it behaves as before.
The untranslated report listed these messages as missing from the
Swedish catalog. Among them are the image export encoders and size
limits, color profiles, color books, swatch exchange files, DXF import,
3D and Revolve errors, and the `index` check of document.activate. Each
now has an @msg row in sv.tsv, with its placeholders, backticked names,
format names and values kept as the English writes them. Messages that
open pull requests already translate into Swedish are left to them.
The Swedish row in docs/localization-parity.md is recounted, and
docs/target-app-parity.md gets a line for the Swedish catalog.
perspective.grid.preset stored the preset's grid every time, so applying
the preset the document already holds recorded an undo step that changed
nothing. It now compares the new grid with the stored one, as
perspective.grid.set does through grid_kept, and records a step only when
the grid changes. When only whether the grid shows or its active plane
differs, the preset sets them without an undo step, as
perspective.grid.show and perspective.plane.set do.
With Window › Arrange › Tile or floating document windows, every document
other than the front one was drawn through the profiles the front document
is assigned, since the active color settings are process-wide.
- cms::with_active puts other settings in place of the active ones on one
thread, fast paths included, and puts them back after (also on a panic).
cms::for_document gives the context a document's assigned profiles make,
the same one each time for the same profiles and working settings.
- Each pane renders its document's art through colormgmt::doc_cms, on the
render worker and on the UI thread alike, and draws its paper, artboard
colors and transparency grid through the same settings.
- Loading or removing a profile redraws the documents assigned it, the
ones behind the front one included.
- The ink and separation tables keep the tables of up to four color
settings, so documents with different CMYK profiles side by side do not
rebuild them on each redraw.
Placed documents inside a document behind the front one still draw through
the front document's profiles.
Where the clipboard goes through the compositor's core Wayland protocol
(the Flatpak on GNOME), Paste now reads the text/uri-list a file manager
offers, else GNOME Files' x-special/gnome-copied-files, and pastes the
first file that is art before the clipboard's other types, as on the
other platforms. The list is read on the read worker and the files on
the paste's background thread. Only file: URIs with no host or
localhost are taken (RFC 8089), percent escapes decoded once (RFC
3986); other URIs are skipped, and a list of more than 1,024 URIs, a
limit of VectorCraft's own, names no file. The Paste menu item is
enabled when a file list is offered.
A graphic style from a .ai or EPS library whose fill, or the fill or
stroke of a style of one paint, paints with one of the file's gradients
by name was left out of the library. Such styles now load with that
gradient at the style's angle. The style stores only the gradient's name
and angle, so the gradient is fitted to the bounds of each object the
style is applied to; this placement is VectorCraft's own rule.
- A style of one paint reads a gradient instance's fill or stroke as
that gradient; a gradient outside an instance is still not read.
- A fill filter paints with its last paint: a color, a gradient or a
pattern replaces whichever of the others came before it.
- A style naming a gradient the file doesn't define, or painting with a
pattern, is still left out.
Docs: docs/mcp.md, graphicStyle.loadLibrary params, progress doc.
dotCooCoo