When only some frames of a threaded story are selected, Remove Line
Breaks and Remove Paragraph Breaks built the story's frame list again
for every selected frame of it, so the work grew with the square of the
frame count. The command now notes a thread once its story is found not
to be selected in full, and reads that thread's other selected frames
on their own without going through the thread again. Each selected
frame still loses its own breaks, in the order selected, as one undo
step.
A test-only counter in threads.rs counts story_in calls, and
remove_breaks_goes_through_a_partly_named_story_once checks both break
kinds with frames named out of order and twice.
With ids, Combine Point Text and Join Point Text take locked and hidden
type. They kept the first piece's object and removed the others, so
naming a visible piece and a hidden one beside it hid the visible text
or showed the hidden text, and the same held for locked pieces and for
pieces in a locked or hidden group or layer.
A piece now joins only pieces that are as visible and as locked as it
is, counting their groups and layers. The selection route takes only
editable type, so it behaves as before.
Add a test that Remove Breaks leaves type on a locked artboard as it is
when ids names it, with no undo step. Rewrap the Text tools paragraph
in docs/mcp.md and name the tests in docs/target-app-parity.md.
- addon.arrange.randomizeOpacity, type.orientation.vertical and .horizontal,
type.opticalMarginAlignment, type.systemLayout and type.fractionalWidths
run through edit_if_changed (the Edit Colors helper) and record an undo step
only when an opacity, a direction or a setting changes.
- A test for each command; the params text says so, and docs/mcp.md for the
commands it describes.
Remove Breaks, Break Text, Combine Point Text, Join Point Text, Set
Alignment, Keep Position and Reset Text Transform skipped locked and
hidden type even when `ids` named it, or named the group or layer
holding it, while other commands such as text.convertListToText act on
named locked or hidden objects.
- With `ids`, the type they name is taken locked or hidden too (not
type on a locked artboard); from the selection, only type that can
be edited, as before.
- Remove Breaks reads a named threaded story with a locked frame as one
text.
- Objects made from locked or hidden type are not selected.
Docs: docs/mcp.md (Text tools), docs/target-app-parity.md.
With apply "opacity", Sort Objects compared each object's opacity with the
value it gets as a percentage, within 1e-6. An evenly stepped value can
differ from a mark's percentage by more than that while it rounds to the
same stored opacity: marks at 30%, 65% and 100% sorted by x with
distribute on keep their opacities, yet the 65% mark counted as changed.
The sort then made an undo step and replaced the opacity the graph stores
for the series (30%) with 65%.
The sort now compares each object's stored opacity with the opacity it is
given, as stored, both to skip a run that changes nothing and to pick the
marks whose opacity the graph keeps.
After Select All in a frame of threaded text, Convert to Text skipped
the story's locked and hidden frames, even when `ids` named them, and
left a paragraph whose text started in one as a list. Remove Line
Breaks and Remove Paragraph Breaks also kept the breaks in those frames.
A selected story is one text, as it already is for Apply Bullets and
Apply Numbers and the Character and Paragraph panels, so both commands
now change every frame of the story, as one undo step.
- text.convertListToText converts every list paragraph of the story,
locked and hidden frames included; `ids` naming a locked or hidden
frame converts its paragraphs too. A call that changes nothing adds
no undo step.
- addon.cleanup.removeBreaks removes the breaks in every frame of the
selected story.
Docs: docs/mcp.md, docs/target-app-parity.md.
Linked images and placed documents in the art of the stored brushes (a
scatter or art brush's art, a pattern brush's tiles) are listed in the
Links panel after the other stored art, one row per linked or placed
object in each brush tile, with the brush as owner
(`{kind: brush, name, index, tile?}`). Check Links, the missing and
modified files reported on open, the link watch, Find in Folder, Relink
(including Relink All Instances), Update, Embed, Placement Options, Link
Info and Go To act on them, and their tooltip names the brush.
- vectorcraft-doc: `Document::mounted_art` holds art kept outside the
document's trees while a command looks it up by id; the stored-art
lookups, link visitors and `art_roots` include it, and
`number_mounted_art` gives its objects ids of their own.
- vectorcraft-brush: `stored_art::StoredArt` mounts the art of the
brushes that hold images or placed documents and writes back only the
entries whose art changed. Entries that do not read as a brush are left
as stored. `brush::store` keeps ids of their own in that art, so a row
keeps its id between commands.
- vectorcraft-engine: the links commands, opening a document, saving a
placed document's source, output of linked files and placed documents,
color masks after Update or Relink, and Package relinking go through
the mounted art.
Brush art rows follow the general Links rule as VectorCraft's own
application of it.
The ranges in the addon.shapes params text are in parentheses, so each
description reads as a params object. The configure description and
docs/mcp.md say that an omitted or null value keeps each shape's setting;
the defaults apply to the drawing commands only.
Object › Plug-ins › Cutting Tools › Nest Shapes… (`addon.cutting.nest`)
moves the selected objects close together onto a sheet or a roll of
material. The sheet starts at an artboard's top-left corner and is the
artboard's size or a set width and height; a roll is a set width with
no end. A margin (18 pt by default) is kept inside the sheet's edges and
a spacing (9 pt) between objects.
Objects are packed by their bounding boxes, with their strokes and
effects (the reach of shadows, glows and blurs included) or by their
geometry: the tallest first, each where its bottom edge is highest and
then furthest left. With Rotate, an object may turn 90° clockwise where
that puts its bottom edge higher or where only the turned object fits;
a turned object is measured after the turn. A path of a pixel-aligned
compound path is not turned. Objects that do not fit go in a column to
the right of the sheet, in stacking order. Objects on the pixel grid
move by whole points and take 1 pt more room, so they stay on the grid
and keep the margin and spacing. A path of a compound path selected on
its own moves alone. Objects without bounds, such as an empty group,
are not moved and are listed in the result.
The command is one undo step, and its result gives the objects placed,
put aside, turned and skipped and the length of material used. The
dialog has Preview.
The new Nest Shapes and Roll catalog rows are in every catalog.
Docs: docs/mcp.md (Cutting Tools add-on), docs/target-app-parity.md and
ROADMAP.
addon.pathtools.cornerSet and cornerRemove now refuse a key other than
id and anchors in an `items` member, with the standard unknown-parameter
error, instead of ignoring it. A misspelled `anchor` used to fall back
to the request's `anchors`, else the path's direct-selected anchors,
else every corner of the path. They also refuse `items` given together
with `ids`, which `items` replaces. Saved steps played with replay
still run as recorded.
Docs: docs/mcp.md, docs/target-app-parity.md.
transparency.set and object.setProps with isolate, knockout or
knockoutShape on a series group now store them for the series
(groupIsolate, groupKnockout, groupKnockoutShape), and the series group
has them again when the graph is drawn again. Randomize Opacity, Sort
Objects and Global Edit store the opacity they give a series group, so
a redraw no longer puts back an older stored value over it.
A move or copy of an appearance onto a series group whose stored values
differ from its own now counts as a change, so the edit is kept. Tests
cover graphicStyle.redefine of a style linked to a series group.
Invert Colors, the Convert to commands, Saturate, Adjust Color Balance,
the Blend commands and Recolor Artwork recorded an undo step even when
they changed no color, for example Invert Colors with fills and strokes
off, Saturate at 0 or a second Blend Front to Back. The empty step also
cleared the redo steps. paint.invert and paint.complement on whole
objects, Apply as Filter (addon.color.filter) and Apply Nearest Swatch
run the same pass and did the same.
These commands now run on a copy of the document and record the step
only when something changed. Convert to Indexed Color uses the same
helper. Recolor Artwork also compares the documents when it counted no
recolored paint, so rewriting a color group's swatches still records
its step.
A recolor of a graph (Invert and Complement on the proxy, the Edit Colors
commands, Recolor Artwork, the color filters, Apply Nearest Swatch and the
ink limit of Print Ink Fixes) stored the new paint of the series marks but
not of the labels. stroke.set, the stroke weight steps, the gradient edits,
Swap Fill and Stroke and Default Fill and Stroke stored nothing when they
changed a label's characters. When the graph was drawn again, the labels
went back to their stored style.
- These commands now store, for every label of the kind they reach, the
label's object rows when they change, and the fill, stroke, stroke weight,
caps, joins, miter limit, dashes and stroke alignment of its characters
when all of them show the change alike.
- A gradient is stored without its placement, and each label fits it to its
own box. A stroke weight and dashes are stored as a scaled label shows
them.
- When labels of one kind change differently, the frontmost one sets what
the kind keeps.
- On a pie with Legends in Wedges, the legend labels' fill is stored only
when every legend label reached ends up with the same fill, so a recolor
of the whole pie leaves them black or white by their wedge.
- Axis lines, ticks and radar rings are not stored and are drawn again with
their default paint.
Docs: docs/mcp.md, the commands' params text, docs/target-app-parity.md.