A Linear point picked near the end of another dimension's line landed
beside it when zoomed in: the tool's own pick skipped dimension artwork,
so that end pulled the point only within the Smart Guides tolerance,
while an anchor of the art pulls it from 8 pixels.
- With Smart Guides or Snap to Point on, a point that no anchor of the
art within 8 pixels takes lands on the end of a visible, unlocked
dimension's dimension line, or on the far end of its extension line,
within 8 pixels, with no link to that dimension. The end of an
extension line next to the point it measures is not an end, so an
anchor that a dimension already measures still takes the point.
- A point that nothing else places lands on the closest point of such
a line within 8 pixels, as it does on a segment of the art.
- With Smart Guides and Anchor/Path Labels on, a point on an anchor or
a line end shows the "anchor" label, and a point on a segment or line
shows the "path" label. A point on a line end is marked as an anchor.
- A press on a line end that moves a few pixels picks it, as a press on
an anchor does.
Docs: docs/dimensions.md, docs/target-app-parity.md.
With Smart Guides and Snap to Tangent on, an Alt+Shift drag with the
Ellipse tool snaps the circle's radius so that the circle touches a
nearby path, when the radius comes within the snapping tolerance of that
size. The touch point is where the line from the center meets a straight
segment or a curve square, inside a segment or at an anchor where the
path runs smoothly, including an anchor where a curve's handle lies on
the anchor. A circle can touch another circle from outside or from
inside. Corners, open path ends and curves around the same center are
not offered.
The touch point shows the "tangent" label, the radius is measured along
the Constrain Angle's axes, and Space moves the circle at the size it
snapped to, which it keeps when Space is let go. When an anchor, center or crossing is near the pointer, or
the dragged corner snapped onto one, the circle is not resized. An
ellipse without Shift is not snapped. Snap to Grid and pixel snapping
place the point instead, also when turned on during the drag, and
turning Snap to Tangent off during the drag stops the snap. A press
with a small jitter is still a click rather than a drag. Each pointer move
measures at most 256 segments near that radius.
With Smart Guides and Snap to Tangent on, a Line Segment drag pressed
anywhere on a convex closed path with curves and dragged to within the
snapping tolerance of another such path lands on a common tangent of the
two. Both ends move to where the line touches the paths, the start sliding
along the first path. The line is the tangent whose touch point on the
second path is nearest the pointer, so moving the pointer around that path
switches between the outer tangent and the one crossing between the paths.
Each end shows the "tangent" label when Anchor/Path Labels is on, and the
line is drawn as a guide when Alignment Guides is on.
Before this change the start of a Line Segment drag always stayed where it
was pressed. It still does when Shift, Alt or Space is held, when an
anchor, center or crossing lies nearer the pointer than the second path,
when the press snapped to an anchor, center or crossing off the first path,
when Snap to Tangent is off, when Snap to Grid or pixel snapping places
drawn points, or when either path bends inward somewhere or has more than
512 segments.
The tangents come from the Common Tangents geometry. Each pointer move
looks at the 16 nearest closed subpaths within the snapping tolerance and
keeps the tangents of up to 64 pairs for the rest of the drag.
A plain drag of the annotator's end handle now slides the end along the
bar's line, at least 10 px from the start, and snaps only to targets on
that line. Alt-drag moves the end freely, changing the length and angle
together, with Shift at Constrain Angle steps. A vector of no length
still moves freely.
Docs: docs/mcp.md, docs/ui-parity.md.
With Smart Guides on, a selection the Selection tool grabbed by one of
its anchors only landed that anchor on other anchors and centers, or
lined its bounds up. The anchor now also lands on the other objects'
paths ("path"), and where a path crosses another path or a ruler guide
("intersect"), in the order Direct Selection uses for a dragged anchor.
When the anchor lands on a path, the bounds do not also line up with
other objects, and a ruler guide nearby does not pull it off the path.
A selection grabbed anywhere else keeps lining its bounds up.
- Targets::for_move_by_anchor gathers the other art's path segments as
well, and Targets::snap_onto_path lands a point on them or on their
crossings with each other and with the ruler guides.
- MoveSnap::by_anchor uses those targets; the Selection tool picks it
when the press grabbed an anchor.
Reported by pivot-al.
Docs: docs/target-app-parity.md.
A gradient vector drawn on the art, a click that applies one, and the
dragged start and end handles snapped through snap_draw, which gathers
the bounds and anchors of the art only. Path segments, View › Snap to
Glyph's guides and the construction guides through the vector's start
did not pull them, and a click applied the gradient from the pointer
rather than from the snapped point. They now snap through DrawSnap, as
the Pen and Line Segment tools do:
- The press gathers the targets, for a vector drawn on the art and the
start and end handles only, and the drag keeps them. A click applies
the gradient from the snapped press.
- A dragged end or handle leaves its start as a Line Segment's end does:
it lands on the construction guides through the start, and with Shift
it keeps to 45° steps from the Constrain Angle and snaps along them.
- The pointer hovering where a press would draw a vector (anywhere with
art selected, over art with nothing selected), and not over the
annotator, shows the guides of the point the vector would start on.
A press that snaps onto a nearby target no longer starts the drag
early: the 3 px drag threshold counts from where the pointer was
pressed, not from the snapped start.
With Smart Guides on, the Dimension tool's second point snapped onto the
construction guides through the first point (Smart Guides › Construction
Guides), so a click beside a segment straight below a first point that
was not on an anchor stayed on the vertical guide instead of landing on
the segment.
The second point now has no construction guides through a first point
that is not on an anchor. After a first point picked on an anchor, the
construction guides through it still apply. The second point still snaps
to anchors, centers and alignment lines, and with Snap to Perpendicular
or Snap to Tangent on it lands where the line from the first point meets
a segment square or grazes a curve.
Docs: docs/dimensions.md, docs/target-app-parity.md.
The Parametric Shape tool's center and the Slice tool's corners snapped
with Smart Guides to the bounds of the art only, so View › Snap to Glyph
had no effect on them, and neither did the anchors and segments of
paths that the other drawing tools snap to. The point dragged out from a
Parametric Shape's center did not snap at all, and neither tool showed
Smart Guides while hovering before a press.
Both tools now snap through the drawing tools' shared snapping
(DrawSnap). A Parametric Shape's center (from a drag or a double-click),
the point dragged out from it, and a slice's corners land on glyph
guides and on path anchors and segments. The guides show while hovering
and during the drag. When a ruler guide then takes a slice corner, the
Smart Guides are no longer shown. A click with the Parametric Shape tool
still draws nothing when its center snaps a few pixels from the pointer.
Docs: docs/mcp.md, docs/target-app-parity.md.
Control bar > Snapping > Pixel Snapping Options... opens a dialog with
three checkboxes: Snap to Pixel While Drawing, While Moving and While
Scaling. OK sets them; Cancel leaves them as they were. While View >
Snap to Pixel is off, the dialog notes that the options take effect once
it is on.
- view.snapToPixel.options {drawing?, moving?, scaling?} reads and sets
them. They are kept in the preferences as the pixelSnap group, all on
by default, so turning Snap to Pixel on behaves as before. An unknown
key or a value that is not a boolean is refused and changes nothing.
The command has a parameter schema, which raises the API level to 4.
- Drawing covers points the drawing tools place, the Knife's straight
cut, the Measure tool and the rulers' origin. Moving covers Selection
and Direct Selection moves, ruler guides, artboard moves and the
Rotate, Reflect and Shear tools' drags. Scaling covers bounding-box,
Free Transform, artboard and slice handles and the Scale tool's drag.
An edit whose option is off snaps as it does with Snap to Pixel off.
- Align New Objects to Pixel Grid and the objects' pixel-aligned
property do not depend on these options.
Docs: docs/mcp.md, docs/target-app-parity.md.
With Smart Guides off, View > Snap to Point still pulls points onto anchors and
ruler guides, but it showed the magenta "anchor" label while drawing, since its
targets kept the default guide style. Its targets now draw no labels or lines.
The zero point dragged out of the box where the rulers meet snaps as a
Pen or shape tool's point does: with Smart Guides onto the anchors,
centres, edges and paths of the art and the artboards or into line with
them, with Snap to Point onto the anchors and along the ruler guides,
else onto whole pixels or the grid. The guides showing what it snapped
to show during the drag and go when it is released or cancelled
(Escape, focus loss, another document). The origin is still set once,
on release (document.setRulerOrigin, one undo step).
The engine snaps it (Session::ruler_origin_drag, with the tools crate's
rulerguide::OriginDrag over PointSnap::drawn), as it does a guide
dragged out of a ruler.
Ruler guides were a list kept beside the layers. Each guide is now an
object of its layer or sublayer, always directly in it and above the
layer's art. These behave as on main:
- Guides draw on screen only. Exports (SVG, PDF, PNG, PSD), Fit All,
Select All, the art bounds, clicks and marquees, and a layer's
Pathfinder and Transform effects leave them out. The Layers panel
lists them as guide rows of their layer, the highest guide.list
index first.
- Deleting a layer deletes its guides, and merging layers keeps their
guides in the merged layer.
- The guide commands number guides as guide.list does, in the order
they were made.
New: each guide takes an id from the document's object ids. An object
command given a guide's id fails with an error, and node.move cannot
put a guide into a group or out of its layers. A guide made while an
opacity mask, a symbol or a pattern is edited moves to the top
visible, unlocked layer when editing ends.
File format: native files still save the guides in the document's
guides list, in every file version, so older builds read them. Each
entry may now also carry the guide's id, name, locked and hidden
flags; older builds ignore those fields. Opening a file puts each
saved guide on its layer (on the top visible, unlocked layer when the
file names none or a layer it does not have), and each saved guide
counts against the object limit for opening a file. A ruler guide node
that a file holds below a layer's art moves up to the layer's guides,
and one anywhere else (in a group or another object, beside the
layers, or in a symbol) is removed. Ruler guides read from an .ai file
become guide objects on the layer they were on, numbered in the order
the file lists them.
main lines a moved selection's edges and centre up with ruler guides
(snap_moved_to_rulers, #5746) but not when Shift keeps the move to its line. The
bounds now slide along that line onto a ruler guide the same way
(snap_moved_along_to_rulers), when nothing else lined up and the grabbed point is
not on a guide, within twice the Snap to Point distance along the line.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Direct Selection showed and dragged the anchors of type on a path's path
(#3980) but not their direction handles: handle_anchors read only a
path's own data, and the canvas draws only a path's handles.
- text.setPathHandle moves a handle of type on a path's path, in
document space, as path.setHandle moves a path's; the brackets keep
their fractions and the text reflows. One undo step.
- Direct Selection draws the handles of selected type on a path and
drags them with it (Alt: one side, Shift: 45 degree steps).
The Measure and Measure & Inspect tools ignored View › Snap to Glyph:
their press and end points snapped only to targets that hold no glyph
guides.
With Snap to Glyph, Smart Guides and Alignment Guides on, and Snap to
Grid and Snap to Pixel off, a drag's press and end land within the
snapping tolerance on the guides of live type that the Character
panel's options allow, except Anchor Point. A Shift-drag's end slides
along its 45° step to them, and the guide shows during the drag. With
Snap to Glyph off, the tools snap to the same targets as before and
show no guide. The targets are kept while the document, the window and
the snapping options stay the same, so a drag lays out the type once.
A short move with View > Snap to Pixel on returned to where it began and
showed a "last location" label, skipping the pixel step. Snap to Last
Location is now off while Snap to Pixel is on, for the Selection tool and
for paths Direct Selection moves by an anchor, so the move lands on whole
pixels as it does with the option off.
A path selected whole that Direct Selection moves held by one of its anchors snapped only through the anchor-drag targets, so Snap to Last Location never put it back. The move now goes back to where it began within Snapping Tolerance, labeled "last location", as a Selection tool move does; an Alt copy is not pulled back.
Preferences > Smart Guides gets Snap to Last Location (`snapToLastLocation`,
off by default). With it and Smart Guides on, a selection moved by dragging
with the Selection, Group Selection or Direct Selection tool, Shift too, goes
back to where the move began while the move is within Snapping Tolerance,
labeled "last location". An Alt copy is not pulled back onto its original.
Source: https://helpx.adobe.com/illustrator/desktop/measure-and-align/grids-and-guides/smart-guides-options.html
The distance, the label and the copy rule are VectorCraft's own.
Character Rotation turned a glyph's baseline shift and scaling with the glyph, and the Skew path effect slants a glyph's height away from the path's normal, so the x-height guide moved off the glyphs. Each positioned glyph now carries the transform that removes its Character Rotation (PositionedGlyph::unturned), and the guide goes through the glyph's x-height point placed without it, measured across the baseline. Snap to Glyph also takes Smart Guides being on in the tools, as View › Snap to Glyph already does in the engine.
With View › Snap to Glyph and Smart Guides on, a point drawn near a single
line of live type now also lands on the anchor points of its glyphs and lines
up with its x-height (raised or lowered by Baseline Shift) and with the edges
of each character's advance width along the baseline (proximity guides). In
rotated type the baseline, x-height and proximity guides run at the type's
angle, and type of one glyph also has angular guides along the glyph's slanted
straight segments; a segment that Shift keeps to its angle slides onto them.
A paragraph shows glyph bounds only, so its baselines are no longer guides.
FontFace::x_height gives a face's x-height in font units.